Organic molecular sieve membranes for chemical separations

Toward Molecular Simulation Guided Design of Next-Generation Membranes: Challenges and Opportunities

Membranes provide energy-efficient solutions for separating ions from water, ion-ion separation, neutral or charged molecules, and mixed gases. Understanding the fundamental mechanisms and design principles for these separation challenges has significant applications in the food and agriculture, energy, pharmaceutical, and electronics industries and environmental remediation. In situ experimental probes to explore Angstrom-nanometer length-scale and pico-nanosecond time-scale phenomena remain limited. Currently, molecular simulations such as density functional theory, ab initio molecular dynamics (MD), all-atom MD, and coarse-grained MD provide physics-based predictive models to study these phenomena. The status of molecular simulations to study transport mechanisms and state-of-the-art membrane separation is discussed. Furthermore, limitations and open challenges in molecular simulations are discussed. Finally, the importance of molecular simulations in generating data sets for machine learning and exploration of membrane design space is addressed.

Shielding CO2-Philic Sites in Trimmed Covalent Organic Framework Pores by Atomic Layer Deposition

Strong adsorptive sites toward unwanted gas molecules in porous framework materials often lead to reversed sorption selectivity, creating tremendous challenges for enhancing the diffusion-driven membrane separations targeted at the weakly adsorbed species in the gas pair. While post-synthetic modification methods have been reported to downsize the pores in covalent organic frameworks (COFs), effective approaches to shield the highly adsorptive sites within the pores are rarely explored. Here, a solvent-less pore modification strategy is developed using atomic layer deposition (ALD). it is shown that controlled amounts of ZnO can be uniformly deposited into the COF pores, offering the ability to fine-tune the pore dimensions. Moreover, the Zn─O moieties grown into the COF pore are found to interact with the CO2-philic ketoenamine groups, and substantially reduce the CO2 solubility by 72.4% in the COF membrane. Accordingly, the simultaneously increased diffusion selectivity and sorption selectivity for H2/CO2 lead to a 330% improvement of the permselectivity in membrane separation, demonstrating the efficacy of the strategy for pore engineering in COFs.

Turing-Structured Covalent Organic Framework Membranes for Fast and Precise Peptide Separations

Turing structures have emerged as promising features for separation membranes, enabling significantly enhanced water permeation due to their ultra-permeable internal cavities. So far, Turing structures are constrained by the highly cross-linked and heterogeneous porosities, impeding them from the application of molecular separations requiring loose but regular pore structures. This work reports a covalent organic frameworks (COFs) membrane with nanoscale striped Turing structures for fast and precise molecular separations. Porous and hydrophilic modulation layers based on metal-polyphenol chemistry are constructed on polymeric substrates, which are capable of enhancing the uptake and controlled release of the activator of amines during synthesis. The appropriately reduced diffusion rate triggers the phenomenon of "local activation and lateral inhibition" arising from thermodynamic instability, creating Turing structures with externally striped and internally cavitated architectures. The Turing-type COF membranes exhibit a water permeance of 45.0 L m-2 h-1 bar-1, which is approximately 13 times greater than the non-Turing membranes, and an ultrahigh selectivity of up to 638 for two model peptides. This work demonstrates the feasibility that Turing structures with ultra-permeable internal cavities can be created in COF membranes and underscores their superiority in molecular separations, including but not limited to high-value pharmaceuticals.

Sub-Minute Fabrication of Metal Organic Framework Membranes via Additive-Accelerated Electrodeposition

Efficient fabrication of metal organic framework (MOF) membranes is important for their broad applications in molecular separations. However, current approaches for MOF membrane fabrication are usually time-consuming due to the slow, random nucleation and crystal growth, particularly the lack of in-situ defect healing ability. Here, we report an additive-accelerated electrodeposition method, which allows ultrafast fabrication of MOF membranes through the synergy of electric field and catecholamine additives. The strong electric field facilitates the directed nucleation of MOF on the substrates while the multifunctional additives accelerate the MOF crystallization, growth and grain-boundary defect healing. Consequently, we fabricate well-intergrown, uniform MOF (ZIF-8) membranes with an ultrathin thickness of ∼180 nm in 30 s, which is the most rapid fabrication of MOF membranes till now. The membranes exhibit superior C3H6/C3H8 separation performance with a C3H6 permeance of 145 GPU and a C3H6/C3H8 separation factor of 151, as well as good stability at high pressure of 7 bar, and the ultrafast membrane fabrication can be achieved on commercial ceramic substrates, exhibiting the potential for practical applications. This work may establish a platform for fast and controllable fabrication of MOF membranes as well as many other membranes based on metal-coordination chemistry.

High-Efficiency Ion Transport in Ultrathin 3D Covalent Organic Framework Nanofluidics

High-efficiency ion transport is essential for both biological and nonbiological processes, including the regulation of cell homeostasis, energy conversion, and mass transfer in chemical industry. Nanofluidic channels are considered ideal platforms for delicate control of ion transport in their unique nanoconfinement, yet currently reported 1D and 2D nanofluidics are subjected to elevated transport resistance due to discontinuous and random channels. Here, we engineer ultrathin, 3D covalent organic framework (3D-COF) nanofluidics featuring continuously interpenetrated pathways and well-ordered pore arrangements, demonstrating superior ion conductance. The energy barrier for ion transport across 3D-COF nanofluidics is exceptionally low, suggesting ultrafast and low-resistance ion movements. Theoretical calculations indicate that 3D-COF nanofluidics facilitate group adsorption to anions, leading to high energy barriers for anion mobility, thus enhancing ion selectivity and high-throughput cation transport. In osmotic energy applications, 3D-COF nanofluidics achieve a power density of 217.7 W m-2 with artificial seawater and river water, potentially scalable to 1238.2 W m-2 under a 500-fold salinity gradient. The proposed 3D-COF nanofluidics offer new avenues for desalination and ion/molecular separation.

Interface-Confined Catalytic Synthesis of Anisotropic Covalent Organic Framework Nanofilm for Ultrafast Molecular Sieving

Covalent organic frameworks (COFs) have emerged as prominent membrane materials for efficiently fractionating organic molecules and ions due to their unique pore structure. However, the fabrication of free-standing COF nanofilms with high crystallinity remains an arduous undertaking, and feasible methods that can enable precise control over the film microstructure are barely reported. This work conceives an exquisite interface-confined catalytic strategy to prepare Tp-BD(OH)2 COF nanofilm with an anisotropic structure analogously to conventional polymeric membranes. Experimental data and molecular simulations reveal that the hydroxyl groups on the framework substantially capture and anchor the acid catalyst through hydrogen bonding interactions at the incipient stage of interfacial polycondensation, instigating confined catalysis and self-termination reaction at the interface. The distinctive asymmetric structure endows the Tp-BD(OH)2 COF nanofilm with a record-breaking pure water permeance of 525.3 L m-2 h-1 bar-1 and unprecedented dye/salt selectivity of 648.6, surpassing other reported COF films and state-of-the-art nanofiltration membranes, as well as enduring structural durability and chemical stability. The implemented interface-confined catalysis strategy opens up a new avenue for regulating the COF nanofilm microstructure and holds broad prospects for the rational design of high-performance membranes for sustainable water purification and treatment.

Nature-Inspired Engineering Separation Materials and Devices

Separation is a fundamental process in natural living systems. Their separation capabilities have inspired the design of various separation materials and devices. Despite some progress having been made, a comprehensive overview is still lacking. In this Perspective, we first review the development of separation technologies. We then summarize some typical living systems exhibiting superior separation capabilities from compositions and microstructures to separation mechanisms. Next, we highlight key advancements in nature-inspired separation materials and integrated devices. Finally, we propose future research directions and opportunities, emphasizing the importance of physical and chemical design and internal and external stimulus regulation. These nature-inspired materials and devices show great potential in biomedicine, environmental remediation, energy conversion, food safety, and analysis testing.

Architecting Multi-Level Structures and Regulating Hydrophilicity of Covalent Organic Framework Aerogels for Optimizing Mass Transport Capacity

Architecting hierarchical structures in monolithic covalent organic frameworks (COFs) is vital for the applications of COFs in mass transport fields. The MXene-coated bilayer aerogels containing β-keto-enamine COF (MX-TpX-COF) with different chain lengths of aromatic linkers are constructed for the study. The directional freezing method endowed the COF part and MXene coating with aligned channels, and the small pores mainly exist in the former, while the larger ones in the latter. The occurrence of multi-level structures inside COF bulks, together with locally ordered vessels formed in the surfaces of MXene coating, are conducive to the mass transport of aerogels. Accordingly, the MX-TpX-COF aerogels showed attractive performance in oil/water separation and desalination, and even can be used for treating and desalinating oil-contaminated seawater simultaneously. The mass transport rate and efficiency, however, strongly depended on the hydrophilicity and specific surface areas of COF bulks, which can be easily tuned by tailoring the chain lengths of aromatic linkers. This study offers a specific perspective on the utilization of bulk COF materials in marine governance, and also proposes a structural regulation way of multi-functional integration for COF-based aerogels.

Chiral Membrane Containing Subnanometer Channels for Enantioselective Transport Amino Acids

The research of chiral separation technology is of great significance for understanding the origin of life and promoting the application of chiral molecules. Herein, anionic chiral pillar[6]arene and cationic pillar[6]arene were designed and synthesized, and a chiral pillar[6]arene membrane was constructed by layer-by-layer assembly through electrostatic interactions. The transport rates of l-Ala and d-Ala in this channel were 14.33 and 1.86 μM cm-2 h-1, respectively, and the transport rate of l-Ala was 7.7 times that of d-Ala. In the transport experiment of Ala racemate, the ee value of l-Ala in the permeate after a single separation was 62%, indicating that this channel has a certain chiral separation ability. The effects of the assembly method, the number of chiral layers, and the driving force on the separation effect were further studied, and the selective transport mechanism was explored through the host-guest interaction at the molecular level and theoretical simulation. This strategy provides a new template for expanding the application of chiral pillar[n]arenes in the field of membrane separation.

Construction of a Fluorinated-Anion Pillared Metal-Organic Framework Exhibiting Dual-Pore Architecture for Simultaneous Enhancement of C2H2 Adsorption Capacity and Selectivity

Physisorption-based separation processes represents a promising alternative to the conventional thermally driven methods, such as cryogenic separation. However, a significant challenge lies in balancing the trade-off between adsorption capacity and selectivity of adsorbents. In this study, we introduce a novel fluorinated-anion pillared metal-organic frameworks (APMOFs) featuring a dual-pore architecture, constructed using a pyridine-oxazole bifunctional ligand. The inherent low symmetry of the ligand leads to significant distortion of the fluorinated-anion pillars, resulting in a distinctive type of APMOFs characterized by dual-pore architecture. On pore structure with constrict pore width is enriched with a high density of anion fluorinated pillars, offering numerous active sites advantageous for enhancing separation selectivity. Concurrently, the other pore structure exhibits larger dimensions, facilitating increased gas molecule accommodation and thereby augmenting adsorption capacity. Gas sorption studies reveal a substantial C2H2 adsorption capacity and a high C2H2/CO2 separation selectivity. Breakthrough experiments confirm its exceptional separation performance, while theoretical investigations elucidate a sequential adsorption process within these APMOFs, underscoring the efficacy of this strategy in overcoming trade-off limits in adsorbents.

Staggered-Stacking Two-Dimensional Covalent Organic Framework Membranes for Molecular and Ionic Sieving

Two-dimensional covalent organic frameworks (2D COFs), a family of crystalline materials with abundant porous structures offering nanochannels for molecular transport, have enormous potential in the applications of separation, energy storage, and catalysis. However, 2D COFs remain limited by relatively large pore sizes (>1 nm) and weak interlayer interactions between 2D nanosheets, making it difficult to achieve efficient membranes to meet the selective sieving requirements for water molecules (0.3 nm) and hydrated salt ions (>0.7 nm). Here, we report a high-performance 2D COF membrane with narrowed channels (0.7 × 0.4 nm2) and excellent mechanical performance constructed by the staggered stacking of cationic and anionic 2D COF nanosheets for selectively sieving of water molecules and hydrated salt ions. The mechanical performance has been improved by two times than that of single-phase 2D COF membranes due to the enhanced interlayer interactions between nanosheets. The stacked 2D COF membranes exhibit significantly improved monovalent salt ions rejection ratio (up to 77.9%) compared with single-phase COF membranes (∼49.2%), while maintaining comparable water permeability. The design of stacked 2D COF membranes provides a potential strategy for constructing high-performance nanoporous membranes to achieve precise molecular and ionic sieving.

Solvent-responsive covalent organic framework membranes for precise and tunable molecular sieving

Membrane-based nanofiltration has the potential to revolutionize the large-scale treatment of organic solvents in various applications. However, the widely used commercial membranes suffer from low permeability, narrow structural tunability, and limited chemical resistance. Here, we report a strategy for fabricating covalent organic framework (COF) membranes with solvent-responsive structural flexibility. The interlayer shifting of these COF membranes in polar organic solvents results in sub-nanopores with high selectivity. High rejection rates (>99%), high permeance (>15 kilogram meter-2 hour-1 bar-1), and excellent organic solvent resistance of these smart COF membranes are achieved for a diverse array of nanofiltration applications.

Turing covalent organic framework membranes via heterogeneous nucleation synthesis for organic solvent nanofiltration

Although covalent organic frameworks (COFs) demonstrate notable potential for developing advanced separation membranes, contemporary COF membranes still lack controlled stacking and highly efficient sieving. Here, Turing-architecture COF membranes were constructed by engineering a reaction-diffusion assembly process via heterogeneous nucleation synthesis with tannic acid (TA). TA covalently binds with amine monomers to form a composite precursor with increased reactivity and decreased diffusivity. This altered the pathway of Schiff base reactions with aldehyde monomers, fulfilling suitable reaction-diffusion conditions, and ultimately formed the labyrinthine stripe or spot-patterned Turing COF film with controlled stacking and uniform pore structure. This endows our COF membrane with highly efficient molecule sieving ability for organic solvent nanofiltration while exhibiting a flux that is 621% greater than that of commercial membranes. Thus, this study provides a paradigm for the in situ synthesis of highly efficient COF membranes for diversely sustainable separations.

Zwitterionic Nanochannels in Covalent Organic Framework Membranes for Improved Flux and Antifouling Property

Zwitterionic membranes demonstrate excellent antifouling property in water purification. The covalent organic frameworks (COFs), due to the ordered channels and abundant organic functional groups, have distinct superiority in constructing zwitterionic surfaces.Here, the zwitterionic COF membrane is prepared with precise framework structures and uniform charge distribution. The negatively charged 4,4'-diaminobiphenyl-2,2'-sisulphonic acid sodium (SA) and positively charged ethidium bromide (EB) fragments are used to react with 1,3,5-triformylphloroglucinol (TP) at the gas-liquid interface to prepare zwitterionic COF membrane. The complementary charged fragments in the inter-layer and inner-layer facilitate the formation of continuous and tight hydration layer on the membrane surface and pore walls to resist the adsorption of pollutants. The zwitterionic COF membrane effectively resists both negatively charged bovine serum albumin and positively charged lysozyme pollutants with flux recovery ratio (FRR) of 97% and 85%, respectively. Furthermore, the regular nano-channels and balanced interactions between water and surface/pore walls of the zwitterionic membrane result in outstanding permeability of up to 146 L m-2 h-1 bar-1 and excellent dye/salt separation selectivity. The water permeation and antifouling mechanism of membranes are elucidated by experimental and molecular dynamics calculation. Zwitterionic COF membranes can find promising applications in preparing high-performance antifouling membranes.

The Key to MOF Membrane Fabrication and Application: the Trade-off between Crystallization and Film Formation

Metal-organic frameworks (MOFs), owing the merits of ordered and tailored channel structures in the burgeoning crystalline porous materials, have demonstrated significant promise in construction of high-performance separation membranes. However, precisely because this crystal structure with strong molecular interaction in their lattice provides robust structural integrity and resistance to chemical and thermal degradation, crystalline MOFs typically exhibit insolubility, infusibility, stiffness and brittleness, and therefore their membrane-processing properties are far inferior to the flexible amorphous polymers and hinder their subsequent storage, transportation, and utilization. Hence, focusing on film-formation and crystallization is the foundation for exploring the fabrication and application of MOF membranes. In this review, the film-forming properties of crystalline MOFs are fundamentally analyzed from their inherent characteristics and compared with those of amorphous polymers, influencing factors of polycrystalline MOF membrane formation are summarized, the trade-off relationship between crystallization and membrane formation is discussed, and the strategy solving the film formation of crystalline MOFs in recent years are systematically reviewed, in anticipation of realizing the goal of preparing crystalline membranes with optimized processability and excellent performance.

Degradative solvent-catalyzed extraction of sewage sludge

It is necessary for the further development of sludge degradative solvent extraction (DSE) to significantly increase the bio-oil yield and adjust its composition. In this study, the effects of MCM-41, HZSM-5, and SSZ-13 on the physical properties, yield, and composition of bio-oil were compared. Results show that all three catalysts effectively promote the conversion of volatiles in the residue to the heavy component (heavy-s). The addition of MCM-41 improved the yieldof both the light component (light-s) and heavy-s. Their yields increased from 8.11% and 20.47% to 14.39% and 29.18%, respectively. Its all-silicon structure and weak acidity have no significant effect on the composition of the bio-oil. HZSM-5 addition increases the light-s yield to 25.58%. Its MFI structure and proper acidity are beneficial to the formation of aromatic hydrocarbons and olefins, while effectively reducing oxygenates. SSZ-13 increases the heavy-s yield to 27.89%, and promoted the formation of nitrogen-containing compounds significantly.

Tailor-Made Heterocharged Covalent Organic Framework Membrane for Efficient Ion Separation

Pore size sieving, Donnan exclusion, and their combined effects seriously affect ion separation of membrane processes. However, traditional polymer-based membranes face some challenges in precisely controlling both charge distribution and pore size on the membrane surface, which hinders the ion separation performance, such as heavy metal ion removal. Herein, the heterocharged covalent organic framework (COF) membrane is reported by assembling two kinds of ionic COF nanosheets with opposite charges and different pore sizes. By manipulating the stacking quantity and sequence of two kinds of nanosheets, the impact of membrane surface charge and pore size on the separation performance of monovalent and multivalent ions is investigated. For the separation of anions, the effect of pore size sieving is dominant, while for the separation of cations, the effect of Donnan exclusion is dominant. The heterocharged TpEBr/TpPa-SO3H membrane with a positively charged upper layer and a negatively charged bottom layer exhibits excellent rejection of multivalent anions and cations (Ni2+, Cd2+, Cr2+, CrO4 2-, SeO3 2-, etc). The strategy provides not only high-performance COF membranes for ion separation but also an inspiration for the engineering of heterocharged membranes.

Covalent organic framework membranes with vertically aligned nanorods for efficient separation of rare metal ions

Covalent organic frameworks (COFs) have emerged as promising platforms for membrane separations, while remaining challenging for separating ions in a fast and selective way. Here, we propose a concept of COF membranes with vertically aligned nanorods for efficient separation of rare metal ions. A quaternary ammonium-functionalized monomer is rationally designed to synthesize COF layers on porous substrates via interfacial synthesis. The COF layers possess an asymmetric structure, in which the upper part displays vertically aligned nanorods, while the lower part exhibits an ultrathin dense layer. The vertically aligned nanorods enlarge contact areas to harvest water and monovalent ions, and the ultrathin dense layer enables both high permeability and selectivity. The resulting membranes exhibit exceptional separation performances, for instance, a Cs+ permeation rate of 0.33 mol m-2 h-1, close to the value in porous substrates, and selectivities with Cs+/La3+ up to 75.9 and 69.8 in single and binary systems, highlighting the great potentials in the separation of rare metal ions.

Smart membranes for separation and sensing

Self-assembled membranes are extensively applied across various fields due to their non-thermal and low-carbon footprint characteristics. Recently, smart membranes with stimuli responsiveness have garnered significant attention for their ability to alter physical and chemical properties in response to different stimuli, leading to enhanced performance and a wider range of applications compared to traditional membranes. This review highlights the recent advancements in self-assembled smart membranes, beginning with widely used membrane preparation strategies such as interfacial polymerization and blending. Then it delves into the primary types of stimuli-responses, including light, pH, and temperature, illustrated in detail with relevant examples. Additionally, the review explores the latest progress in the use of smart membranes for separation and sensing, addressing the challenges and opportunities in both fields. This review offers new insights into the design of novel smart membrane platforms for sustainable development and provides a broader perspective on their commercial potential.

Electrostatic Repulsion Facilitated Ion Transport in Covalent-Organic Framework Membranes

Covalent-organic framework (COF) membranes are increasingly used for many potential applications including ion separation, fuel cells, and ion batteries. It is of central importance to fundamentally and quantitatively understand ion transport in COF membranes. In this study, a series of COF membranes is designed with different densities and arrangements of functional groups and subsequently utilize molecular simulation to provide microscopic insights into ion transport in these membranes. The membrane with a single-sided layer exhibits the highest chloride ion (Cl-) conductivity of 77.2 mS cm-1 at 30 °C. Replacing the single-sided layer with a double-sided layer or changing layer arrangement leads to a decrease in Cl- conductivity up to 33% or 53%, respectively. It is revealed that the electrostatic repulsion between ions serves as a driving force to facilitate ion transport and the positions of functional groups determine the direction of electrostatic repulsion. Furthermore, the ordered pores generate concentrated ions and allow rapid ion transport. This study offers bottom-up inspiration on the design of new COF membranes with moderate density and proper arrangement of functional groups to achieve high ion conductivity.

Continuous Covalent Organic Framework Membranes with Ordered Nanochannels as Tunable Transport Layers for Fast Butanol/Water Separation

Polymeric membranes with high permselective performance are desirable for energy-saving bioalcohol separations. However, it remains challenging to design membrane microstructures with low-resistance channels and a thin thickness for fast alcohol transport. Herein, we demonstrate highly crystalline covalent organic framework (COF) membranes with ordered nanochannels as tunable transport layers for efficient butanol/water separation. The thickness was well-regulated by altering the concentration and molar ratio of two aldehyde monomers with different reactivity. The surface-integrated poly(dimethylsiloxane) produced defect-free and hydrophobic COF membranes. The membrane with continuous transport channels exhibited an exceptional flux of up to 18.8 kg m-2 h-1 and a pervaporation separation index of 217.7 kg m-2 h-1 for separating 5 wt % n-butanol/water. The separation efficiency exceeded that of analogous membranes. The calculated mass-transfer coefficient of butanol followed an inverse relationship with the COF membrane thickness. Consequently, this work reveals the great potential of crystalline polymeric membranes with high-density nanopores for biofuel recovery.

Tempospatially Confined Catalytic Membranes for Advanced Water Remediation

The application of homogeneous catalysts in water remediation is limited by their excessive chemical and energy input, weak regenerability, and potential leaching. Heterogeneous catalytic membranes (CMs) offer a new approach to facilitate efficient, selective, and continuous pollutant degradation. Thus, integrating membranes and continuous filtration with heterogeneous advanced oxidation processes (AOPs) can promote thermodynamic and kinetic mass transfers in spatially confined intrapores and facilitate diffusion-reaction processes. Despite the remarkable advantages of heterogeneous CMs, their engineering application is practically restricted due to the fuzzy design criteria for specific applications. Herein, the recent advances in CMs for advanced water remediation are critically reviewed and the design flow for tempospatially confined CMs is proposed. Further, state-of-the-art CM materials and their catalytic mechanisms are reviewed, after which the tempospatial confinement mechanisms comprising the nanoconfinement effect, interface effect, and kinetic mass transfer are emphasized, thus clarifying their roles in the construction and performance optimization of CMs. Additionally, the fabrication methods for CMs based on their catalysts and pore sizes are summarized and an overview of their application and performance evaluations is presented. Finally, future directions for CMs in materials research and water treatment, are presented.

Ultralight and Robust Covalent Organic Framework Fiber Aerogels

Shaping covalent organic frameworks (COFs) into macroscopic objects with robust mechanical properties and hierarchically porous structure is of great significance for practical applications but remains formidable and challenging. Herein, a general and scalable protocol is reported to prepare ultralight and robust pure COF fiber aerogels (FAGs), based on the epitaxial growth synergistic assembly (EGSA) strategy. Specifically, intertwined COF nanofibers (100-200 nm) are grown in situ on electrospinning polyacrylonitrile (PAN) microfibers (≈1.7 µm) containing urea-based linkers, followed by PAN removal via solvent extraction to obtain the hollow COF microfibers. The resultant COF FAGs possess ultralow density (14.1-15.5 mg cm-3) and hierarchical porosity that features both micro-, meso-, and macropores. Significantly, the unique interconnected structure composed of nanofibers and hollow microfibers endows the COF FAGs with unprecedented mechanical properties, which can fully recover at 50% strain and be compressed for 20 cycles with less than 5% stress degradation. Moreover, the aerogels exhibit excellent capacity for organic solvent absorption (e.g., chloroform uptake of >90 g g-1). This study opens new avenues for the design and fabrication of macroscopic COFs with excellent properties.

Discrimination of Xylene Isomers by Precisely Tuning the Interlayer Spacing of Reduced Graphene Oxide Membrane

Separating xylene isomers is a challenging task due to their similar physical and chemical properties. In this study, we developed a molecular sieve incorporating a reduced graphene oxide (rGO) membrane for the precise differentiation of xylene isomers. We fabricated GO membranes using a vacuum filtration technique followed by thermal-induced reduction to produce rGO membranes with precisely controllable interlayer spacing. Notably, we could finely tune the interlayer spacing of the rGO membrane from 8.0 to 5.0 Å by simply varying the thermal reduction temperature. We investigated the reverse osmosis separation ability of the rGO membranes for xylene isomers and found that the rGO membrane with an interlayer spacing of 6.1 Å showed a high single component permeance of 0.17 and 0.04 L m-2 h-1 bar-1 for para- and ortho-xylene, respectively, exhibiting clear permselectivity. The separation factor reached 3.4 and 2.8 when 90:10 and 50:50 feed mixtures were used, respectively, with permeance 1 order of magnitude higher than that of current state-of-the-art reverse osmosis membranes. Additionally, the membrane showed negligible permeance and selectivity decay even after continuous operation for more than 5 days, suggesting commendable membrane resistance to solvent swelling and operating pressure.

Challenges and recent advances in MOF-based gas separation membranes

Membrane-based gas separation, characterized by a small footprint, low energy consumption and no pollution, has gained widespread attention as an environmentally friendly alternative to traditional gas separation. Metal-organic-frameworks (MOFs) are considered to be one of the most promising membrane-based gas separation materials because of their large specific surface area and high porosity. One of the hottest studies at the moment is how to utilize the characteristics of MOFs to prepare higher performance gas separation membranes. This paper provides a review of gas separation membranes used in recent years. Firstly, the synthesis methods of MOFs and MOF membranes are briefly introduced. Then, methods to improve the membrane properties of MOFs are described in detail, and include applications of lamellar MOFs, ionic liquid (IL) spin coating, functionalization of MOFs, defect engineering and mixed fillers. In addition, the challenges of MOF-based gas separation membranes are presented, including pore size, environmental disturbances, plasticization, interfacial compatibility, and so on. Finally, based on the current development status of the MOF membranes, the development prospects of MOF gas separation membranes are discussed. It is hoped to provide reliable and complete ideas for researchers to prepare high-performance gas separation membranes in the future.

Fullerenol as a nano-molecular sieve additive enables stable zinc metal anodes

Aqueous zinc batteries (AZBs) with the advantages of safety, low cost, and sustainability are promising candidates for large-scale energy storage devices. However, the issues of interface side reactions and dendrite growth at the zinc metal anode (ZMA) significantly harm the cycling lifespan of AZBs. In this study, we designed a nano-molecular sieve additive, fullerenol (C60(OH)n), which possesses a surface rich in hydroxyl groups that can be uniformly dispersed in the aqueous solution, and captures free water in the electrolyte, thereby suppressing the occurrence of interfacial corrosion. Besides, fullerenol can be further reduced to fullerene (C60) on the surface of ZMA, holding a unique self-smoothing effect that can inhibit the growth of dendritic Zn. With the synergistic action of these two effects, the fullerenol-contained electrolyte (FE) enables dendrite-free ZMAs. The Zn-Ti half-cell using FE exhibits stable cycling over 2500 times at 5 mA cm-2 with an average Coulombic efficiency as high as 99.8 %. Additionally, the Zn-NaV3O8 cell using this electrolyte displays a capacity retention rate of 100 % after 1000 cycles at -20 °C. This work provides important insights into the molecular design of multifunctional electrolyte additives.

Recent advancement on water filtration membranes: Navigating biofouling challenges

This study investigates the field of antifouling membranes for water filtration and desalination applications, specifically focusing on two-dimensional materials. The study examines the importance of these membranes in the context of climate change and its effects on coastal ecosystems. The occurrence of biofouling in seawater desalination membranes is closely connected to intricate processes influenced by factors such as water quality, microbial communities, hydrodynamics, and membrane properties. Microorganism adhesion initiates the process, which then advances into irreversible attachment and the creation of biofilm. Detached pieces contribute to the perpetuation of fouling. Biofouling is caused by a variety of biomaterials and organics, including bacteria, extracellular polymeric substances (EPS), proteins, and humic compounds. Innovative methods such as surface alterations using two-dimensional materials like graphene and graphene oxide, as well as the use of biofouling-resistant materials, provide promising possibilities. These materials have antifouling characteristics, making them environmentally beneficial options that reduce the need for chemical cleaning. Their application improves the water treatment process by preventing fouling and enhancing membrane performance. Real-world research applications can enhance and optimize these tactics to effectively reduce biofouling in seawater desalination systems, hence improving efficiency and sustainability. This is particularly important in light of climate change and its impact on coastal ecosystems. The findings obtained from the literature review emphasise the utmost significance of tackling biofouling in the face of a changing environment, particularly with regard to microorganisms. Important factors to consider are the selection of coating materials, the implementation of environmentally friendly cleaning solutions made from natural chemicals, and the improvement of pretreatment systems. Green cleaning agents are important eco-friendly alternatives to typical biocides, as they possess antibacterial, antifungal, and antifouling capabilities. Given the existence of climate change, these observations serve as a basis for promoting environmentally friendly methods in water treatment technology.

The physical basis for solvent flow in organic solvent nanofiltration

Organic solvent nanofiltration (OSN) is an emerging membrane technology that could revolutionize chemical separations in numerous vital industries. Despite its significance, there remains a lack of fundamental understanding of solvent transport mechanisms in OSN membranes. Here, we use an extended Flory-Rehner theory, nonequilibrium molecular dynamic simulations, and organic solvent transport experiments to demonstrate that solvent flow in OSN membranes is driven by a pressure gradient. We show that solvent molecules migrate as clusters through interconnected pathways within the membrane pore structure, challenging the widely accepted diffusion-based view of solvent transport in OSN. We further reveal that solvent permeance is dependent on solvent affinity to the OSN membrane, which, in turn, controls the membrane pore structure. Our fundamental insights lay the scientific groundwork for the development of next-generation OSN membranes.

Thiol-Ene Click Reaction in Constructing Liquid Separation Membranes for Water Treatment

In the evolving landscape of water treatment, membrane technology has ascended to an instrumental role, underscored by its unmatched efficacy and ubiquity. Diverse synthesis and modification techniques are employed to fabricate state-of-the-art liquid separation membranes. Click reactions, distinguished by their rapid kinetics, minimal byproduct generation, and simple reaction condition, emerge as a potent paradigm for devising eco-functional materials. While the metal-free thiol-ene click reaction is acknowledged as a viable approach for membrane material innovation, a systematic elucidation of its applicability in liquid separation membrane development remains conspicuously absent. This review elucidates the pre-functionalization strategies of substrate materials tailored for thiol-ene reactions, notably highlighting thiolation and introducing unsaturated moieties. The consequential implications of thiol-ene reactions on membrane properties-including trade-off effect, surface wettability, and antifouling property-are discussed. The application of thiol-ene reaction in fabricating various liquid separation membranes for different water treatment processes, including wastewater treatment, oil/water separation, and ion separation, are reviewed. Finally, the prospects of thiol-ene reaction in designing novel liquid separation membrane, including pre-functionalization, products prediction, and solute-solute separation membrane, are proposed. This review endeavors to furnish invaluable insights, paving the way for expanding the horizons of thiol-ene reaction application in liquid separation membrane fabrication.

Ultrathin Two-Dimensional Porous Fullerene Membranes for Ultimate Organic Solvent Separation

Two-dimensional (2D) materials with high chemical stability have attracted intensive interest in membrane design for the separation of organic solvents. As a novel 2D material, polymeric fullerenes (C60)∞ with distinctive properties are very promising for the development of innovative membranes. In this work, we report the construction of a 2D (C60)∞ nanosheet membrane for organic solvent separation. The pathways of the (C60)∞ nanosheet membrane are constructed by sub-1-nm lateral channels and nanoscale in-plane pores created by the depolymerization of the (C60)∞ nanosheets. Attributing to ordered and shortened transport pathways, the ultrathin porous (C60)∞ membrane is superior in organic solvent separation. The hexane, acetone, and methanol fluxes are up to 1146.3±53, 900.4±41, and 879.5±42 kg ⋅ m-2 ⋅ h-1, respectively, which are up to 130 times higher than those of the state-of-the-art membranes with similar dye rejection. Our findings demonstrate the prospect of 2D (C60)∞ as a promising nanofiltration membrane in the separation of organic solvents from macromolecular compounds such as dyes, drugs, hormones, etc.

2D MOFs and Zeolites for Composite Membrane and Gas Separation Applications: A Brief Review

Commercial membranes have predominantly been fabricated from polymers due to their economic viability and processability. This choice offers significant advantages in energy efficiency, cost-effectiveness, and operational simplicity compared to conventional separation techniques like distillation. However, polymeric membranes inherently exhibit a trade-off between their permeability and selectivity, which is summarized in the Robeson upper bound. To potentially surpass these limitations, mixed-matrix membranes (MMMs) can be an alternative solution, which can be constructed by combining polymers with inorganic additives such as metal-organic frameworks (MOFs) and zeolites. Incorporating high-aspect-ratio fillers like MOF nanosheets and zeolite nanosheets is of significant importance. This incorporation not only enhances the efficiency of separation processes but also reinforces the mechanical robustness of the membranes. We outline synthesis techniques for producing two-dimensional (2D) crystals (including nanocrystals with high aspect ratio) and provide examples of their integration into membranes to customize separation performances. Moreover, we propose a potential trajectory for research in the area of high-aspect-ratio materials-based MMMs, supported by a mathematical-model-based performance prediction.

Hydrogen-bonded organic frameworks for membrane separation

Hydrogen-bonded organic frameworks (HOFs) are a new class of crystalline porous materials that are formed through the interconnection of organic or metal-organic building units via intermolecular hydrogen bonds. The remarkable flexibility and reversibility of hydrogen bonds, coupled with the customizable nature of organic units, endow HOFs with mild synthesis conditions, high crystallinity, solvent processability, and facile self-healing and regeneration properties. Consequently, these features have garnered significant attention across various fields, particularly in the realm of membrane separation. Herein, we present an overview of the recent advances in HOF-based membranes, including their advanced fabrication strategies and fascinating applications in membrane separation. To attain the desired HOF-based membranes, careful consideration is dedicated to crucial factors such as pore size, stability, hydrophilicity/hydrophobicity, and surface charge of the HOFs. Additionally, diverse preparation methods for HOF-based membranes, including blending, in situ growth, solution-processing, and electrophoretic deposition, have been analyzed. Furthermore, applications of HOF-based membranes in gas separation, water treatment, fuel cells, and other emerging application areas are presented. Finally, the challenges and prospects of HOF-based membranes are critically pointed out.

Molecular Mobility and Gas Transport Properties of Mixed Matrix Membranes Based on PIM-1 and a Phosphinine Containing Covalent Organic Framework

Polymers with intrinsic microporosity (PIMs) are gaining attention as gas separation membranes. Nevertheless, they face limitations due to their pronounced physical aging. In this study, a covalent organic framework containing λ5-phosphinine moieties, CPSF-EtO, was incorporated as a nanofiller (concentration range 0-10 wt %) into a PIM-1 matrix forming dense films with a thickness of ca. 100 μm. The aim of the investigation was to investigate possible enhancements of gas transport properties and mitigating effects on physical aging. The incorporation of the nanofiller occurred on an nanoaggregate level with domains up to 100 nm, as observed by T-SEM and confirmed by X-ray scattering. Moreover, the X-ray data show that the structure of the microporous network of the PIM-1 matrix is changed by the nanofiller. As molecular mobility is fundamental for gas transport as well as for physical aging, the study includes dielectric investigations of pure PIM-1 and PIM-1/CPSF-EtO mixed matrix membranes to establish a correlation between the molecular mobility and the gas transport properties. Using the time-lag method, the gas permeability and the permselectivity were determined for N2, O2, CH4, and CO2 for samples with variation in filler content. A significant increase in the permeability of CH4 and CO2 (50% increase compared to pure PIM-1) was observed for a concentration of 5 wt % of the nanofiller. Furthermore, the most pronounced change in the permselectivity was found for the gas pair CO2/N2 at a filler concentration of 7 wt %.

Large-Area Soluble Covalent Organic Framework Oligomer Coating for Organic Solution Nanofiltration Membranes

Covalent organic frameworks (COFs) are a family of engaging membrane materials for molecular separation, which remain challenging to fabricate in the form of thin-film composite membranes due to slow crystal growth and insoluble powder. Here, an additive approach is presented to construct COF-based thin-film composite membranes in 10 min via COF oligomer coating onto poly(ether ether ketone) (PEEK）ultrafiltration membranes. By the virtue of ultra-thin liquid phase and liquid-solid interface-confined assembly, the COF oligomers are fast stacked up and grow along the interface with the solvent evaporation. Benefiting from the low out-plane resistance of COFs, COF@PEEK composite membranes exhibit high solvent permeances in a negative correlation with solvent viscosity. The well-defined pore structures enable high molecular sieving ability (Mw = 300 g mol-1 ). Besides, the COF@PEEK composite membranes possess excellent mechanical integrities and steadily operate for over 150 h in the condition of high-pressure cross flow. This work not only exemplifies the high-efficiency and scale-up preparation of COF-based thin-film composite membranes but also provides a new strategy for COF membrane processing.

2D Covalent Organic Framework Membranes for Liquid-Phase Molecular Separations: State of the Field, Common Pitfalls, and Future Opportunities

2D covalent organic frameworks (2D COFs) are attractive candidates for next-generation membranes due to their robust linkages and uniform, tunable pores. Many publications have claimed to achieve selective molecular transport through COF pores, but reported performance metrics for similar networks vary dramatically, and in several cases the reported experiments are inadequate to support such conclusions. These issues require a reevaluation of the literature. Published examples of 2D COF membranes for liquid-phase separations can be broadly divided into two categories, each with common performance characteristics: polycrystalline COF films (most >1 µm thick) and weakly crystalline or amorphous films (most <500 nm thick). Neither category has demonstrated consistent relationships between the designed COF pore structure and separation performance, suggesting that these imperfect materials do not sieve molecules through uniform pores. In this perspective, rigorous practices for evaluating COF membrane structures and separation performance are described, which will facilitate their development toward molecularly precise membranes capable of performing previously unrealized chemical separations. In the absence of this more rigorous standard of proof, reports of COF-based membranes should be treated with skepticism. As methods to control 2D polymerization improve, precise 2D polymer membranes may exhibit exquisite and energy efficient performance relevant for contemporary separation challenges.

2023 The 1st National Competition of "Bloomag Cup" in CO2 capture, conversion, and utilization

The inaugural National Competition for Carbon Dioxide Capture, Conversion and Utilization Innovation ("Bloomag Cup") was successfully held on July 30, 2023 in Beijing. This competition was initiated by Professor Tianwei Tan and Prof. Yongqin Lv from Beijing University of Chemical Technology (BUCT), and jointly organized by BUCT and Chongqing University. The competition is slated for annual recurrence, with a rotational hosting arrangement involving various academic institutions. The ongoing competition underscores the primacy of pioneering and exploratory facets inherent to technological innovation. Its principal objective is to catalyze the development of foundational and cutting-edge technological competencies within the realm of CO2 capture, conversion, and utilization. The overarching goals encompass identifying promising technological breakthroughs, fostering emerging talent in scientific and technological innovation, facilitating high-quality sustainable economic growth within China, and actively contributing to global efforts towards peak carbon emissions and achieving sustainable development goals for humanity. This inaugural Bloomag Cup saw wide participation from students and researchers, generating fruitful discussions that advance the nascent field. It is hoped this competition will continue cultivating solutions that help mitigate anthropogenic climate change through innovative carbon dioxide technologies.

Tunable Molecular Sieving by Hierarchically Assembled Porous Organic Cage Membranes with Solvent-Responsive Switchable Pores

Molecular separations involving solvents and organic impurities represent great challenges for environmental and water-intensive industries. Novel materials with intrinsic nanoscale pores offer a great choice for improvement in terms of energy efficiency and capital costs. Particularly, in applications where gradient and ordered separation of organic contaminants remain elusive, smart materials with switchable pores can offer efficient solutions. Here, we report a hierarchically networked porous organic cage membrane with dynamic control over pores, elucidating stable solvent permeance and tunable dye rejection over different molecular weights. The engineered cage membrane can spontaneously modulate its geometry and pore size from water to methanol and DMF in a reversible manner. The cage membrane exhibits ≥585.59 g mol-1 molecular weight cutoff preferentially in water and is impeded by methanol (799.8 g mol-1) and DMF (≈1017 g mol-1), reflecting 36 and 73% change in rejection due to self-regulation and the flexible network, respectively. Grazing incidence X-ray diffraction illustrates a clear peak downshift, suggesting an intrinsic structural change when the cage membranes were immersed in methanol or DMF. We have observed reversible structural changes that can also be tuned by preparing a methanol/DMF mixture and adjusting their ratio, thereby enabling gradient molecular filtration. We anticipate that such cage membranes with dynamic selectivity could be promising particularly for industrial separations and wastewater treatment.

Machine Learning Guided Polyamide Membrane with Exceptional Solute-Solute Selectivity and Permeance

Designing polymeric membranes with high solute-solute selectivity and permeance is important but technically challenging. Existing industrial interfacial polymerization (IP) process to fabricate polyamide-based polymeric membranes is largely empirical, which requires enormous trial-and-error experimentations to identify optimal fabrication conditions from a wide candidate space for separating a given solute pair. Herein, we developed a novel multitask machine learning (ML) model based on an artificial neural network (ANN) with skip connections and selectivity regularization to guide the design of polyamide membranes. We used limited sets of lab-collected data to obtain satisfactory model performance over four iterations by introducing human expert experience in the online learning process. Four membranes under fabrication conditions guided by the model exceeded the present upper bound for mono/divalent ion selectivity and permeance of the polymeric membranes. Moreover, we obtained new mechanistic insights into the membrane design through feature analysis of the model. Our work demonstrates a ML approach that represents a paradigm shift for high-performance polymeric membranes design.

Chemically Asymmetric Polymers Manipulate the Crystallization of Two-Dimensional Covalent Organic Frameworks to Synthesize Processable Nanosheets

Nanosheets derived from two-dimensional covalent organic frameworks (2D COFs) are increasingly desirable in various fields. While breakthroughs in the chemical and physical delamination of 2D COFs are rising, precisely regulating the growth of the COF nanosheets has not been realized yet. Herein, we report an effective strategy of polymer-manipulated crystallization to accurately control the growth of COF nanosheets. Chemically asymmetric polyvinylpyrrolidone (PVP) is developed as the manipulator that selectively interacts with the aldehydes and (100) facet to induce anisotropic growth of COFs. The number of PVP constitutional units determines this specific interaction, leading to molecularly thin but thickness-controllable nanosheets with excellent dispersity. We process these nanosheets into robust A4-sized membranes for ultraselective molecular separation. The membrane intercalated with long-chain PVP demonstrates largely improved performance, surpassing the reported COF membranes. This work reports a strategy for anisotropically crystallizing 2D COFs to yield processable nanosheets toward practical applications.

Recent applications of organic cages in sensing and separation processes in solution

Organic cages are three-dimensional polycyclic compounds of great interest in the scientific community due to their unique features, which generally include simple synthesis based on the dynamic covalent chemistry strategies, structural tunability and high selectivity. In this feature article, we present the advances over the last ten years in the application of organic cages as chemosensors or components in chemosensing devices for the determination of analytes (pollutants, analytes of biological interest) in complex aqueous media including wine, fruit juice, urine. Details on the recent applications of organic cages as selective (back-)extractants or masking agents for potential applications in relevant separation processes, such as the plutonium and uranium recovery by extraction, are also provided. Over the last ten years, organic cages with permanent porosity in the liquid and solid states have been highly appreciated as porous materials able to discriminate molecules of different sizes. These features, combined with good solvent processability and film-forming tendency, have proved useful in the fabrication of membranes for gas separation, solvent nanofiltration and water remediation processes. An overview of the recent applications of organic cages in membrane separation technologies is given.

Surface Segregation Methods toward Molecular Separation Membranes

As a highly promising approach to solving the issues of energy and environment, membrane technology has gained increasing attention in various fields including water treatment, liquid separations, and gas separations, owing to its high energy efficiency and eco-friendliness. Surface segregation, a phenomenon widely found in nature, exhibits irreplaceable advantages in membrane fabrication since it is an in situ method for synchronous modification of membrane and pore surfaces during the membrane forming process. Meanwhile, combined with the development of synthesis chemistry and nanomaterial, the group has developed surface segregation as a versatile membrane fabrication method using diverse surface segregation agents. In this review, the recent breakthroughs in surface segregation methods and their applications in membrane fabrication are first briefly introduced. Then, the surface segregation phenomena and the classification of surface segregation agents are discussed. As the major part of this review, the authors focus on surface segregation methods including free surface segregation, forced surface segregation, synergistic surface segregation, and reaction-enhanced surface segregation. The strategies for regulating the physical and chemical microenvironments of membrane and pore surfaces through the surface segregation method are emphasized. The representative applications of surface segregation membranes are presented. Finally, the current challenges and future perspectives are highlighted.

Two-step fabrication of COF membranes for efficient carbon capture

Covalent organic framework (COF) materials have been considered as disruptive membrane materials for gas separation. The dominant one-step method for COF nanosheet synthesis often suffers from coupling among polymerization, assembly and crystallization processes. Herein, we propose a two-step method comprising a framework assembly step and functional group switching step to synthesize COF nanosheets and the corresponding COF membranes. In the first step, the pristine COF-316 nanosheets bearing cyano groups are prepared via interfacial polymerization. In the second step, the cyano groups in COF-316 nanosheets were switched into amidoxime groups or carboxyl groups. Through the vacuum-assisted self-assembly method, the COF nanosheets were fabricated into membranes with a thickness below 100 nm. Featuring numerous mass transport channels and homogeneous distribution of functional groups, the amidoxime-modified COF-316 membrane demonstrated excellent separation performance, with a permeance above 500 GPU and a CO2/N2 selectivity above 50. The two-step method may inspire the rational design and fabrication of organic framework membranes.

Gas Permeation through Mechanically Resistant Self-Standing Membranes of a Neat Amorphous Organic Cage

The synthesis and characterization of a novel film-forming organic cage and of its smaller analogue are here described. While the small cage produced single crystals suitable for X-ray diffraction studies, the large one was isolated as a dense film. Due to its remarkable film-forming properties, this latter cage could be solution processed into transparent thin-layer films and mechanically stable dense self-standing membranes of controllable thickness. Thanks to these peculiar features, the membranes were also successfully tested for gas permeation, reporting a behavior similar to that found with stiff glassy polymers such as polymers of intrinsic microporosity or polyimides. Given the growing interest in the development of molecular-based membranes, for example for separation technologies and functional coatings, the properties of this organic cage were investigated by thorough analysis of their structural, thermal, mechanical and gas transport properties, and by detailed atomistic simulations.

Interfacial Polymerization of Highly Active Thiolated Cyclodextrin for the Fabrication of a Loose Nanofiltration Membrane with a Chlorine-Resistant Poly(thioester) Linkage

Cyclodextrins have been frequently used to fabricate membranes via interfacial polymerization (IP). However, the relatively low reactivity of pristine cyclodextrins often induces a lower cross-linking density and unsatisfactory separation performance. In this work, to introduce a highly active thiolated β-cyclodextrin (CD-SH) monomer into IP progress, we constructed a dense and porous poly(thioester) linkage on a commercial membrane surface with loose nanofiltration by IP of CD-SH and trimesoyl trichloride (TMC) as the monomer in an aqueous phase and organic phase separately for the first time. Furthermore, the reactivity of CD-SH has been fully demonstrated by the two-phase IP aiming at unmodified β-CD, a CD-SH/TMC freestanding membrane with a thicker interfacial layer and a smoother surface, and a PAN/CD-SH membrane with a narrow porous distribution. The composite membrane possessed superior separation performance for a high rejection (83.1-99.6%) of different anionic dyes and a low rejection (<20%) of salts, as well as a high-efficiency sieving ability of dye/dye and dye/salt mixtures. The membrane with a poly(thioester) selective layer could steadily operate in a long-term filtration test and exhibit great stability, chloride-resistance performance, and recyclability.

Balancing the Crystallinity and Film Formation of Metal-Organic Framework Membranes through In Situ Modulation for Efficient Gas Separation

Polycrystalline metal-organic framework (MOF) layers hold great promise as molecular sieve membranes for efficient gas separation. Nevertheless, the high crystallinity tends to cause inter-crystalline defects/cracks in the nearby crystals, which makes crystalline porous materials face a great challenge in the fabrication of defect-free membranes. Herein, for the first time, we demonstrate the balance between crystallinity and film formation of MOF membrane through a facile in situ modulation strategy. Monocarboxylic acid was introduced as a modulator to regulate the crystallinity via competitive complexation and thus concomitantly control the film-forming state during membrane growth. Through adjusting the ratio of modulator acid/linker acid, an appropriate balance between this structural "trade-off" was achieved. The resulting MOF membrane with moderate crystallinity and coherent morphology exhibits molecular sieving for H2 /CO2 separation with selectivity up to 82.5.

First-principle study of Cu-, Ag-, and Au-decorated Si-doped carbon quantum dots (Si@CQD) for CO2 gas sensing efficacies

CONTEXT

Nanosensor materials for the trapping and sensing of CO₂ gas in the ecosystem were investigated herein to elucidate the adsorption, sensibility, selectivity, conductivity, and reactivity of silicon-doped carbon quantum dot (Si@CQD) decorated with Ag, Au, and Cu metals. The gas was studied in two configurations on its O and C sites. When the metal-decorated Si@CQD interacted with the CO₂ gas on the C adsorption site of the gas, there was a decrease in all the interactions with the lowest energy gap of 1.084 eV observed in CO₂_C_Cu_Si@CQD followed by CO₂_C_Au_Si@CQD which recorded a slightly higher energy gap of 1.094 eV, while CO₂_C_Ag_Si@CQD had an energy gap of 2.109 eV. On the O adsorption sites, a decrease was observed in CO₂_O_Au_Si@CQD which had the least energy gap of 1.140 eV, whereas there was a significant increase after adsorption in CO₂_O_Ag_Si@CQD and CO₂_O_Cu_Si@CQD with calculated ∆E values of 2.942 eV and 3.015 eV respectively. The adsorption energy alongside the basis set supposition error (BSSE) estimation reveals that CO₂_C_Au_Si@CQD, CO₂_C_Ag_Si@CQD, and CO₂_C_Cu_Si@CQD were weakly adsorbed, while chemisorption was present in the CO₂_O_Ag_Si@CQD, CO₂_O_Cu_Si@CQD, and CO₂_O_Au_Si@CQD interactions. Indeed, the adsorption of CO₂ on the different metal-decorated quantum dots affects the Fermi level (E_f) and the work function (Φ) of each of the decorated carbon quantum dots owed to their low E_f values and high ∆Φ% which shows that they can be a prospective work function-based sensor material.

METHODS

Electronic structure theory method based on first-principle density functional theory (DFT) computation at the B3LYP-GD3(BJ)/Def2-SVP level of theory was utilized through the use of the Gaussian 16 and GaussView 6.0.16 software packages. Post-processing computational code such as multi-wavefunction was employed for result analysis and visualization.

Wastewater treatment with algal based membrane bioreactor for the future: Removing emerging containments

The difficulty of developing pollutants in aquatic ecosystems and their potential effects on animals and plants have been raised. Sewage effluent can seriously harm a river's plant and animal life by reducing the water's oxygen content. Due to their increasing use and poor elimination in traditional municipal wastewater treatment plants (WWTPs), pharmaceuticals are one of the developing pollutants that have the potential to penetrate aquatic ecosystems. Due to undigested pharmaceuticals and their metabolites, which constitute a significant class of potentially hazardous aquatic pollutants. Using an algae-based membrane bioreactor (AMBR), the primary objective of this research was to eliminate emerging contaminants (ECs) identified in municipal wastewater. The first part of this research covers the basics of growing algae, an explanation of how they work, and how they remove ECs. Second, it develops the membrane in the wastewater, explains its workings, and uses the membrane to remove ECs. Finally, an algae-based membrane bioreactor for removing ECs is examined. As a result, daily algal production using AMBR technology might range from 50 to 100 mg/Liter. These kinds of machines are capable of nitrogen and phosphorus removal efficiencies of 30-97% and 46-93%, respectively.

Advanced stimuli-responsive membranes for smart separation

Membranes have been extensively studied and applied in various fields owing to their high energy efficiency and small environmental impact. Further conferring membranes with stimuli responsiveness can allow them to dynamically tune their pore structure and/or surface properties for efficient separation performance. This review summarizes and discusses important developments and achievements in stimuli-responsive membranes. The most commonly utilized stimuli, including light, pH, temperature, ions, and electric and magnetic fields, are discussed in detail. Special attention is given to stimuli-responsive control of membrane pore structure (pore size and porosity/connectivity) and surface properties (wettability, surface topology, and surface charge), from the perspective of determining the appropriate membrane properties and microstructures. This review also focuses on strategies to prepare stimuli-responsive membranes, including blending, casting, polymerization, self-assembly, and electrospinning. Smart applications for separations are also reviewed as well as a discussion of remaining challenges and future prospects in this exciting field. This review offers critical insights for the membrane and broader materials science communities regarding the on-demand and dynamic control of membrane structures and properties. We hope that this review will inspire the design of novel stimuli-responsive membranes to promote sustainable development and make progress toward commercialization.

Engineering Metal-Organic-Framework (MOF)-Based Membranes for Gas and Liquid Separation

Separation is one of the most energy-intensive processes in the chemical industry, and membrane-based separation technology contributes significantly to energy conservation and emission reduction. Additionally, metal-organic framework (MOF) materials have been widely investigated and have been found to have enormous potential in membrane separation due to their uniform pore size and high designability. Notably, pure MOF films and MOF mixed matrix membranes (MMMs) are the core of the "next generation" MOF materials. However, there are some tough issues with MOF-based membranes that affect separation performance. For pure MOF membranes, problems such as framework flexibility, defects, and grain orientation need to be addressed. Meanwhile, there still exist bottlenecks for MMMs such as MOF aggregation, plasticization and aging of the polymer matrix, poor interface compatibility, etc. Herein, corresponding methods are introduced to solve these problems, including inhibiting framework flexibility, regulating synthesis conditions, and enhancing the interaction between MOF and substrate. A series of high-quality MOF-based membranes have been obtained based on these techniques. Overall, these membranes revealed desired separation performance in both gas separation (e.g., CO2, H2, and olefin/paraffin) and liquid separation (e.g., water purification, organic solvent nanofiltration, and chiral separation).