Catalytic C-H to C-M (M = Al, Mg) bond transformations with heterometallic complexes

Decentralized Metal-Metal Bonding in the AuNi(CO)4- Anion Described Equally Well with Dative Bonding as with Electron-Sharing Bonding

The heterodinuclear AuNi(CO)4- complex is scrutinized in the gas phase by using mass-selected anionic photoelectron velocity-map imaging spectroscopy in conjunction with theoretical computations. The ground state of AuNi(CO)4- is characterized to have an Au-Ni bonded structure, consisting of an AuCO fragment attached to the Ni center of the Ni(CO)3 fragment. Comprehensive quantum chemical studies reveal that the AuNi(CO)4- complex at equilibrium structure features a decentralized bonding scenario, where the exotic metal-metal σ bonding may be equally well described with dative bonding as with electron-sharing bonding between two fragments.

Synthesis, Structure, and Bonding of Actinide-Rhenium Polyhydrides

The synthesis of actinide tetrarhenate complexes completes a series of iridate, osmate, and rhenate polyhydrides, allowing for structural and bonding comparisons to be made. Computational studies examine the bonding interactions, particularly between metals, in these complexes. Several factors─including metal oxidation state, coordination number, and dispersion effects─affect metal-metal distances and covalency in these actinide tetrametallates. Related osmium and rhenium octametallic U2M6 clusters are synthesized and described, and subjected to similar structural and electronic analyses.

Dyotropic Rearrangement of an Iron-Aluminium Complex

Ligand exchange processes at metal complexes underpin their reactivity and catalytic applications. While mechanisms of ligand exchange at single site complexes are well established, occurring through textbook associative, dissociative and interchange mechanisms, those involving heterometallic complexes are less well developed. Here we report the reactions of a well-defined Fe-Al dihydride complex with exogenous ligands (CO and CNR, R=Me, tBu, Xyl=2,6-Me2C6H3). Based on DFT calculations we suggest that these reactions occur through a dyotropic rearrangement, this involves initial coordination of the exogenous ligand at Al followed by migration to Fe, with simultaneous migration of a hydride ligand from Fe to Al. Such processes are rare for heterometallic complexes. We study the bonding and mechanism of the dyotropic rearrangement through in-depth computational analysis (NBO, IBOs, CLMO analysis, QTAIM, NCIplot, IGMH), shedding new light on how the electronic structure of the heterometallic core responds to the migration of ligands between metal sites. The dyotropic rearrangement fundamentally changes the nature of the hydride ligands, exposing new nucleophilic reactivity as evidenced by insertion reactions with CO2, isocyanates, as well as isocyanides.

Transition Metal-Free Catalytic C-H Zincation and Alumination

C-H metalation is the most efficient method to prepare aryl-zinc and -aluminium complexes that are ubiquitous nucleophiles. Virtually all C-H metalation routes to form Al/Zn organometallics require stoichiometric, strong Brønsted bases with no base-catalyzed reactions reported. Herein we present a catalytic in amine/ammonium salt (Et3N/[(Et3N)H]+) C-H metalation process to form aryl-zinc and aryl-aluminium complexes. Key to this approach is coupling an endergonic C-H metalation step with a sufficiently exergonic dehydrocoupling step between the ammonium salt by-product of C-H metalation ([(Et3N)H]+) and a Zn-H or Al-Me containing complex. This step, forming H2/MeH, makes the overall cycle exergonic while generating more of the reactive metal electrophile. Mechanistic studies supported by DFT calculations revealed metal-specific dehydrocoupling pathways, with the divergent reactivity due to the different metal valency (which impacts the accessibility of amine-free cationic metal complexes) and steric environment. Notably, dehydrocoupling in the zinc system proceeds through a ligand-mediated pathway involving protonation of the β-diketiminate Cγ position. Given this process is applicable to two disparate metals (Zn and Al), other main group metals and ligand sets are expected to be amenable to this transition metal-free, catalytic C-H metalation.

Cooperative activation of carbon-hydrogen bonds by heterobimetallic systems

The direct activation of C-H bonds has been a rich and active field of organometallic chemistry for many years. Recently, incredible progress has been made and important mechanistic insights have accelerated research. In particular, the use of heterobimetallic complexes to heterolytically activate C-H bonds across the two metal centers has seen a recent surge in interest. This perspective article aims to orient the reader in this fast moving field, highlight recent progress, give design considerations for further research and provide an optimistic outlook on the future of catalytic C-H functionalization with heterobimetallic complexes.

N-Heterocyclic imine-based bis-gallium(I) carbene analogs featuring a four-membered Ga2N2 ring

A combination of Ga(I) centers as important building blocks and scaffolds containing N-heterocyclic imines gives new insights into low-valent Ga chemistry. In this study, a mixture of LDipNLi (LDip = 1,3-bis(2,6-diisopropylphenyl)-imidazolin-2-ylidene), tBuOK, and Cp*Ga (Cp* = pentamethylcyclopentadienyl) in toluene afforded [LDipN-Ga]2 (1) via salt metathesis. X-ray structure analysis of 1 revealed a four-membered Ga2N2 ring, and DFT studies indicated the presence of a lone pair at each Ga center. In addition, compound 1 demonstrated diverse reactivities towards methyl trifluoromethanesulfonate, diphenyl disulfide, 9,10-phenanthrenequinone, and ECl2 (E = Ge or Sn).

Transition-Metal-Catalyzed C-H Bond Activation for the Formation of C-C Bonds in Complex Molecules

Site-predictable and chemoselective C-H bond functionalization reactions offer synthetically powerful strategies for the step-economic diversification of both feedstock and fine chemicals. Many transition-metal-catalyzed methods have emerged for the selective activation and functionalization of C-H bonds. However, challenges of regio- and chemoselectivity have emerged with application to highly complex molecules bearing significant functional group density and diversity. As molecular complexity increases within molecular structures the risks of catalyst intolerance and limited applicability grow with the number of functional groups and potentially Lewis basic heteroatoms. Given the abundance of C-H bonds within highly complex and already diversified molecules such as pharmaceuticals, natural products, and materials, design and selection of reaction conditions and tolerant catalysts has proved critical for successful direct functionalization. As such, innovations within transition-metal-catalyzed C-H bond functionalization for the direct formation of carbon-carbon bonds have been discovered and developed to overcome these challenges and limitations. This review highlights progress made for the direct metal-catalyzed C-C bond forming reactions including alkylation, methylation, arylation, and olefination of C-H bonds within complex targets.

C-H Activation of Inert Arenes using a Photochemically Activated Guanidinato-Magnesium(I) Compound

UV irradiation of solutions of a guanidinate coordinated dimagnesium(I) compound, [{(Priso)Mg}2 ] 3 (Priso=[(DipN)2 CNPri 2 ]- , Dip=2,6-diisopropylphenyl), in either benzene, toluene, the three isomers of xylene, or mesitylene, leads to facile activation of an aromatic C-H bond of the solvent in all cases, and formation of aryl/hydride bridged magnesium(II) products, [{(Priso)Mg}2 (μ-H)(μ-Ar)] 4-9. In contrast to similar reactions reported for β-diketiminate coordinated counterparts of 3, these C-H activations proceed with little regioselectivity, though they are considerably faster. Reaction of 3 with an excess of the pyridine, p-NC5 H4 But (pyBut ), gave [(Priso)Mg(pyBut H)(pyBut )2 ] 10, presumably via reduction of the pyridine to yield a radical intermediate, [(Priso)Mg(pyBut ⋅)(pyBut )2 ] 11, which then abstracts a proton from the reaction solvent or a reactant. DFT calculations suggest two possible pathways to the observed arene C-H activations. One of these involves photochemical cleavage of the Mg-Mg bond of 3, generating magnesium(I) doublet radicals, (Priso)Mg⋅. These then doubly reduce the arene substrate to give "Birch-like" products, which subsequently rearrange via C-H activation of the arene. Circumstantial evidence for the photochemical generation of transient magnesium radical species includes the fact that irradiation of a cyclohexane solution of 3 leads to an intramolecular aliphatic C-H activation process and formation of an alkyl-bridged magnesium(II) species, [{Mg(μ-Priso-H )}2 ] 12. Furthermore, irradiation of a 1 : 1 mixture of 3 and the β-diketiminato dimagnesium(I) compound, [{(Dip Nacnac)Mg}2 ] (Dip Nacnac=[HC(MeCNDip)2 ]- ), effects a "scrambling" reaction, and the near quantitative formation of an unsymmetrical dimagnesium(I) compound, [(Priso)Mg-Mg(Dip Nacnac)] 13. Finally, the EPR spectrum (77 K) of a glassed solution of UV irradiated 3 is dominated by a broad featureless signal, indicating the presence of a doublet radical species.

Diverse reactivity of an iron-aluminium complex with substituted pyridines

The reaction of an Fe-Al complex with an array of substituted pyridines is reported. Depending on the substitution pattern of the substrate site-selective sp2 or sp3 C-H bond activation is observed. A series of reaction products are observed based on (i) C-Al bond formation, (ii) C-C bond formation by nucleophilic addition or (iii) deprotonation of the β-diketiminate ligand. A divergent set of mechanisms involving a common intermediate is proposed.

A Free Aluminylene with Diverse σ-Donating and Doubly σ/π-Accepting Ligand Features for Transition Metals*

We report herein the synthesis, characterization, and coordination chemistry of a free N-aluminylene, namely a carbazolylaluminylene 2 b. This species is prepared via a reduction reaction of the corresponding carbazolyl aluminium diiodide. The coordination behavior of 2 b towards transition metal centers (W, Cr) is shown to afford a series of novel aluminylene complexes 3-6 with diverse coordination modes. We demonstrate that the tri-active ambiphilic Al center in 2 b can behave as: 1. a σ-donating and doubly π-accepting ligand; 2. a σ-donating, σ-accepting and π-accepting ligand; and 3. a σ-donating and doubly σ-accepting ligand. Additionally, we show ligand exchange at the aluminylene center providing access to the modulation of electronic properties of transition metals without changing the coordinated atoms. Investigations of 2 b with IDippCuCl (IDipp=1,3-bis(2,6-diisopropylphenyl)imidazol-2-ylidene) show an unprecedented aluminylene-alumanyl transformation leading to a rare terminal Cu-alumanyl complex 8. The electronic structures of such complexes and the mechanism of the aluminylene-alumanyl transformation are investigated through density functional theory (DFT) calculations.

Molecular Main Group Metal Hydrides

This review serves to document advances in the synthesis, versatile bonding, and reactivity of molecular main group metal hydrides within Groups 1, 2, and 12-16. Particular attention will be given to the emerging use of said hydrides in the rapidly expanding field of Main Group element-mediated catalysis. While this review is comprehensive in nature, focus will be given to research appearing in the open literature since 2001.

Organometallo-macrocycle assembled through dialumane-mediated C-H activation of pyridines

Dialumane 1 reacts with pyridines at elevated temperatures through regioselective reductive dehydrogenation of 4-H, affording a unique hexanuclear Al(iii) macrocycle [{LAl(pyridyl)}6], which represents the first dialumane-mediated C-H activation of Py and may suggest a new approach toward organometallo supra-molecules by one-pot small molecule activation and self-assembly.

1st row transition metal aluminylene complexes: preparation, properties and bonding analysis

The synthesis and spectroscopic characterisation of eight new first-row transition metal (M = Cr, Mn, Fe, Co, Cu) aluminylene complexes is reported. DFT and ab initio calculations have been used to provide detailed insight into the metal-metal bond. The σ-donation and π-backdonation properties of the aluminylene ligand are evaluated via NBO and ETS-NOCV calculations. These calculations reveal that these ligands are strong σ-donors but also competent π-acceptors. These properties are not fixed but vary in response to the nature of the transition metal centre, suggesting that aluminylene fragments can modulate their bonding to accommodate both electron-rich and electron-poor transition metals. Ab initio DLPNO-CCSD(T) calculations show that dispersion plays an important role in stabilising these complexes. Both short-range and long-range dispersion interactions are identified. These results will likely inform the design of next-generation catalysts based on aluminium metalloligands.

Rh(III)-Catalyzed C-H Activation/[3 + 2] Annulation of N-Phenoxyacetamides via Carbooxygenation of 1,3-Dienes

A unique Rh(III)-catalyzed C-H activation/[3 + 2] annulation of N-phenoxyacetamides has been developed for the construction of dihydrobenzofurans via carbooxygenation of 1,3-dienes. This transformation features a redox-neutral process with specific chemoselectivity, good substrate/functional group compatibility, and profound synthetic potentials. A preliminary exploration to realize their asymmetric synthesis have been also successfully demonstrated, which further strengthens the practicality of this approach.