Biomimetic two-dimensional nanozymes: synthesis, hybridization, functional tailoring, and biosensor applications

Recent advances in MXene nanozyme-based optical and electrochemical biosensors for food safety analysis

The importance of nanotechnology is increasing every day in different fields and, especially, the application of nanomaterials has attracted considerable attention in food safety. Among different nanomaterials, MXenes, which are two-dimensional (2D) transition metal-based layered materials made of nitrides and carbides, have revolutionized various fields as a cutting-edge scientific discovery in nanotechnology. These materials have been widely used in the structure of biosensors and sensors due to their excellent metallic conductivity, mechanical stability, optical absorbance, good redox capability, and higher heterogeneous electron transfer rate. In particular, the application of MXenes as nanozymes has highlighted their high performance to a great extent in biosensor domains. The growing interest in these nanozymes is attributed to their specific physicochemical features. The key enzymatic features of these materials include activities similar to oxidase, peroxidase, catalase, and superoxide dismutase. In this review, initially, several common synthesis methods of MXenes are presented, emphasizing their significant role as nanozymes in constructing efficient sensors. Subsequently, several common applications of MXene nanozymes in food safety analysis are delved into, including the detection of bacteria, mycotoxins, antibiotic residues, and pesticide residues, along with their applications in different electrochemical and optical biosensors. In addition, the gap, limitation, and future perspective of these novel nanozymes in food safety are highlighted.

A review towards sustainable analyte detection: Biomimetic inspiration in biosensor technology

The branch of biomimetics has witnessed a profound impact on the field of biosensor technology, reflected in sustainable analyte detection. A vast array of biosensor platforms with improved/upgraded performance have been developed and reported. No wonder the motivation from the field of biomimetics has a huge impact on generating detection systems with escalated degrees of manipulation and tunability at different levels. More recently, biomimetic biosensor technology has found potential in constructing bio-inspired materials such as aptamers, MIPs, nanozymes, DNAzymes, Synzymes, etc. to be integrated with biosensor fabrication. The establishment of a sensing setup is not limited to the bioreceptor fabrication; the construction of transducing element using biomimetic material have been reported too. Moreover, to serve a biosensing of target analyte from a fatal diseased sample different biomimetic architectures can be designed that mimic in-vivo microenvironmental surroundings to get an exact microenvironment equivalent to natural conditions leading towards designing of a precise treatment strategy. This research area is ever-evolving as there is a scope for upgradation and refinement due to advancing technologies including nanotechnology, biomimetic nanomaterials, microfluidics, optical sensors, etc. This review is an attempt to comprehend and juxtapose the very primary innovations in the field of biomimetic biosensor technology to realize its comprehensive and wide-range scope and possibilities.

Engineering a two-dimensional metal-carbon nanozyme-based portable paper-based colorimetric chip for onsite and visual analysis of pyrophosphate

Sensitive and accurate analysis of pyrophosphate (PPi) is of great importance for preventing health hazard in environment. Nevertheless, most of sensors focus on sensitivity and selectivity, but practicality is also a significant quota. How to reconciling sensitivity, selectivity and practicability in one single sensor is desirable but remains challenging. Here, we created a novel metal-carbon nanozyme V2O5@C with two-dimensional (2D) morphology and high yet exclusive peroxidase (POD)-like activity via a glucose and NH4NO4-co-directed avenue, and further showed its application in constructing a portable and disposable paper-based analytical chip (PA-chip) for rapid, visual and onsite analysis of PPi. PPi etched V2O5 to prevent the decomposition of H2O2 into ·OH, resulting in weakened POD-like activity. In comparison with PPi deficiency, colorless TMB couldn't be oxidized into oxidized TMB with a dropped absorption at 652 nm. Therefore, obviously shallowed blue color on PA-chip surface was recorded, and demonstrated a negative relationship with PPi dosage, enabling rapid and visual detection of PPi with a limit of detection of 2.6 nM. This study demonstrated the burgeoning applications of nanozymes with POD-like activity in construction of PA-chips for PPi and will quicken the advancement of practical sensors, guaranteeing environmental safety.

Glutathione-mediated copper sulfide nanoplatforms with morphological and vacancy-dependent photothermal catalytic activity for multi-model tannic acid assays

Interface engineering and vacancy engineering play an important role in the surface and electronic structure of nanomaterials. The combination of the two provides a feasible way for the development of efficient photocatalytic materials. Here, we use glutathione (GSH) as a coordination molecule to design a series of CuxS nanomaterials (CuxS-GSH) rich in sulfur vacancies using a simple ultrasonic-assisted method. Interface engineering can induce amorphous structure in the crystal while controlling the formation of porous surfaces of nanomaterials, and the formation of a large number of random orientation bonds further increases the concentration of sulfur vacancies in the crystal structure. This study shows that interface engineering and vacancy engineering can enhance the light absorption ability of CuxS-GSH nanomaterials from the visible to the near-infrared region, improve the efficiency of charge transfer between CuxS groups, and promote the separation and transfer of optoelectronic electron-hole pairs. In addition, a higher specific surface area can produce a large number of active sites, and the synergistic and efficient photothermal conversion efficiency (58.01%) can jointly promote the better photocatalytic performance of CuxS-GSH nanomaterials. Based on the excellent hot carrier generation and photothermal conversion performance of CuxS-GSH under illumination, it exhibits an excellent ability to mediate the production of reactive oxygen species (ROS) through peroxide cleavage and has excellent peroxidase activity. Therefore, CuxS-GSH has been successfully developed as a nanoenzyme platform for detecting tannic acid (TA) content in tea, and convenient and rapid detection of tannic acid is achieved through the construction of a multi-model strategy. This work not only provides a new way to enhance the enzyme-like activity of nanomaterials but also provides a new prospect for the application of interface engineering and vacancy engineering in the field of photochemistry.

Designing intelligent bioorthogonal nanozymes: Recent advances of stimuli-responsive catalytic systems for biomedical applications

Bioorthogonal nanozymes have emerged as a potent tool in biomedicine due to their unique ability to perform enzymatic reactions that do not interfere with native biochemical processes. The integration of stimuli-responsive mechanisms into these nanozymes has further expanded their potential, allowing for controlled activation and targeted delivery. As such, intelligent bioorthogonal nanozymes have received more and more attention in developing therapeutic approaches. This review provides a comprehensive overview of the recent advances in the development and application of stimuli-responsive bioorthogonal nanozymes. By summarizing the design outlines for anchoring bioorthogonal nanozymes with stimuli-responsive capability, this review seeks to offer valuable insights and guidance for the rational design of these remarkable materials. This review highlights the significant progress made in this exciting field with different types of stimuli and the various applications. Additionally, it also examines the current challenges and limitations in the design, synthesis, and application of these systems, and proposes potential solutions and research directions. This review aims to stimulate further research toward the development of more efficient and versatile stimuli-responsive bioorthogonal nanozymes for biomedical applications.

Engineered two-dimensional nanomaterials based diagnostics integrated with internet of medical things (IoMT) for COVID-19

More than four years have passed since an inimitable coronavirus disease (COVID-19) pandemic hit the globe in 2019 after an uncontrolled transmission of the severe acute respiratory syndrome (SARS-CoV-2) infection. The occurrence of this highly contagious respiratory infectious disease led to chaos and mortality all over the world. The peak paradigm shift of the researchers was inclined towards the accurate and rapid detection of diseases. Since 2019, there has been a boost in the diagnostics of COVID-19 via numerous conventional diagnostic tools like RT-PCR, ELISA, etc., and advanced biosensing kits like LFIA, etc. For the same reason, the use of nanotechnology and two-dimensional nanomaterials (2DNMs) has aided in the fabrication of efficient diagnostic tools to combat COVID-19. This article discusses the engineering techniques utilized for fabricating chemically active E2DNMs that are exceptionally thin and irregular. The techniques encompass the introduction of heteroatoms, intercalation of ions, and the design of strain and defects. E2DNMs possess unique characteristics, including a substantial surface area and controllable electrical, optical, and bioactive properties. These characteristics enable the development of sophisticated diagnostic platforms for real-time biosensors with exceptional sensitivity in detecting SARS-CoV-2. Integrating the Internet of Medical Things (IoMT) with these E2DNMs-based advanced diagnostics has led to the development of portable, real-time, scalable, more accurate, and cost-effective SARS-CoV-2 diagnostic platforms. These diagnostic platforms have the potential to revolutionize SARS-CoV-2 diagnosis by making it faster, easier, and more accessible to people worldwide, thus making them ideal for resource-limited settings. These advanced IoMT diagnostic platforms may help with combating SARS-CoV-2 as well as tracking and predicting the spread of future pandemics, ultimately saving lives and mitigating their impact on global health systems.

Recent Development of Nanomaterials for Chemical Engineering

There has been an explosive growth in research on nanomaterials since the late 1980s and early 1990s [...].

Machine-Learning-Assisted Nanozyme Design: Lessons from Materials and Engineered Enzymes

Nanozymes are nanomaterials that exhibit enzyme-like biomimicry. In combination with intrinsic characteristics of nanomaterials, nanozymes have broad applicability in materials science, chemical engineering, bioengineering, biochemistry, and disease theranostics. Recently, the heterogeneity of published results has highlighted the complexity and diversity of nanozymes in terms of consistency of catalytic capacity. Machine learning (ML) shows promising potential for discovering new materials, yet it remains challenging for the design of new nanozymes based on ML approaches. Alternatively, ML is employed to promote optimization of intelligent design and application of catalytic materials and engineered enzymes. Incorporation of the successful ML algorithms used in the intelligent design of catalytic materials and engineered enzymes can concomitantly facilitate the guided development of next-generation nanozymes with desirable properties. Here, recent progress in ML, its utilization in the design of catalytic materials and enzymes, and how emergent ML applications serve as promising strategies to circumvent challenges associated with time-expensive and laborious testing in nanozyme research and development are summarized. The potential applications of successful examples of ML-aided catalytic materials and engineered enzymes in nanozyme design are also highlighted, with special focus on the unified aims in enhancing design and recapitulation of substrate selectivity and catalytic activity.

Nanomaterial-based optical colorimetric sensors for rapid monitoring of inorganic arsenic species: a review

Health concerns about the toxicity of arsenic compounds have therefore encouraged the development of new analytical tools for quick monitoring of arsenic in real samples with improved sensitivity, selectivity, and reliability. An overview of advanced optical colorimetric sensor techniques for real-time monitoring of inorganic arsenic species in the environment is given in this review paper. Herein, several advanced optical colorimetric sensor techniques for arsenite (As+3) and arsenate (As+5) based on doping chromogenic dyes/reagents, biomolecule-modified nanomaterials, and arsenic-binding ligand tethered nanomaterials are introduced and discussed. This review also highlights the benefits and limitations of the colorimetric sensor for arsenic species. Finally, prospects and future developments of an optical colorimetric sensor for arsenic species are also proposed. For future study in this sector, particularly for field application, authors recommend this review paper will be helpful for readers to understand the design principles and their corresponding sensing mechanisms of various arsenic optical colorimetric sensors.

Co, Fe Dual-Doped MoS2 Nanosheets on Polypyrrole Microtubes as Effective Peroxidase Mimics for Glutathione Sensing

Heteroatom doping is considered an effective way to enhance the catalytic activity of MoS2 nanosheets (NSs). In the paper, dual-metal doping was proposed to incorporate Fe and Co into hierarchical MoS2 ultrathin NSs, which grew directly on polypyrrole microtubes (Fe, Co-MoS2@PPy), for the enhanced enzyme-like catalytic reaction. The particular hollow tubular structure realized effective electron transfer. The doped Fe and Co tuned the electronic architecture of the MoS2 NSs to enhance the enzyme-like catalytic activity. The abundant exposed void spaces facilitated ion diffusion/penetration between the PPy interlayer and Fe-Co doped MoS2 shell, leading to heterostructured synergistic effects. Therefore, the synthesized Fe and Co-MoS2@PPy composites showed remarkable catalytic activity. The high catalytic efficiency of Fe and Co-MoS2@PPy was confirmed with the reaction of tetramethylbenzidine (TMB) and H2O2 for visible detection. The blue color disappeared after adding glutathione (GSH). Thus, this procedure was used as a convenient way to detect GSH with a detection limit of 0.76 μM. The dual-metal-doped strategy was confirmed to improve the performance of MoS2 nanocomposites and could be used as a promising matrix for other applications, such as electrochemical energy conversion, medical diagnosis, and others.

Mineral Phase Reconfiguration Enables the High Enzyme-like Activity of Vermiculite for Antibacterial Application

Phyllosilicates-based nanomaterials, particularly iron-rich vermiculite (VMT), have wide applications in biomedicine. However, the lack of effective methods to activate the functional layer covered by the external inert layer limits their future applications. Herein, we report a mineral phase reconfiguration strategy to prepare novel nanozymes by a molten salt method. The peroxidase-like activity of the VMT reconfiguration nanozyme is 10 times that of VMT, due to the electronic structure change of iron in VMT. Density-functional theory calculations confirmed that the upward shifted d-band center of the VMT reconfiguration nanozyme promoted the adsorption of H2O2 on the active iron sites and significantly elongated the O-O bond lengths. The reconfiguration nanozyme exhibited nearly 100% antibacterial activity toward Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus), much higher than that of VMT (E. coli 10%, S. aureus 21%). This work provides new insights for the rational design of efficient bioactive phyllosilicates-based nanozyme.

Aptasensors Based on Non-Enzymatic Peroxidase Mimics: Current Progress and Challenges

Immunoassays based on antibodies as recognizing elements and enzymes as signal-generating modules are extensively used now in clinical lab diagnostics, food, and environmental analyses. However, the application of natural enzymes and antibodies has some drawbacks, such as relatively high manufacturing costs, thermal instability, and lot-to-lot variations that lower the reproducibility of results. Oligonucleotide aptamers are able to specifically bind their targets with high affinity and selectivity, so they represent a prospective alternative to protein antibodies for analyte recognition. Their main advantages include thermal stability and long shelf life, cost-efficient chemical synthesis, and negligible batch-to-batch variations. At the same time, a wide variety of non-protein peroxidase mimics are now available that show strong potential to replace protein enzymes. Here, we review and analyze non-protein biosensors that represent a nexus of these two concepts: aptamer-based sensors (aptasensors) with optical detection (colorimetric, luminescent, or fluorescent) based on different peroxidase mimics, such as DNAzymes, nanoparticles, or metal-organic frameworks.

Enhancement of the peroxidase-like activity of hollow spherical FexNi1-xS2/SC nanozymes

Artificial nanozymes have been receiving considerable interest for their outstanding performance and wide application. However, their low activity results in a high concentration of substrates, costs, and environmental pollution. To enhance nanozymic activity, a composite, FexNi1-xS2/hollow carbon spheres (FexNi1-xS2/SC), was facilely synthesized by a solvothermal method. The response surface methodology (RSM) was used to optimize the Ni content in FexNi1-xS2/SC and the experimental conditions, where Fe0.75Ni0.25S2/SC exhibited the highest activity. The Km (Michaelis-Menten's constant) values of Fe0.75Ni0.25S2/SC are 0.025 and 0.021 mM with H2O2 and oxidized 3,3',5,5'-tetramethylbenzidine (TMB) as the substrates, respectively, which are 148 times and 20.5 times lower than those with HRP, 1.88 and 7.19 times lower than those of FeS2/SC, and 1.88 and 10.52 times lower than those of Fe0.8Ni0.2S2, meaning a strong affinity of Fe0.75Ni0.25S2/SC for the substrate. The catalytic efficiency (Kcat/Km) of Fe0.75Ni0.25S2/SC was 5.4 (H2O2) and 27.4 times (TMB), and 9.7 (H2O2) and 66.2 times (TMB) higher than those of FeS2/SC and Fe0.8Ni0.2S2, respectively. The effects of the synergistic interaction between Fe and Ni, the S-C bond formation, and the hollow carbon spheres on the activity were studied. A nanozymic mechanism was proposed. Fe0.75Ni0.25S2/SC could be used to detect cysteine (Cys) at room temperature in 1 min with a detection limit (LOD) of 0.049 μM.

Integrated Design of a Dual-Mode Colorimetric Sensor Driven by Enzyme-like Activity Regulation Strategy for Ultratrace and Portable Detection of Hg2

Colorimetric analysis for mercury detection has great application potential in the prevention of health damage caused by mercury in the environment. Sensitivity, selectivity, and portability are core competencies of sensors, and concentrating these properties in a single sensor for efficient mercury detection remains a great challenge. Herein, a hollow structure CuS@CuSe@PVP (CCP) was prepared in which the enzyme-like activities could be activated by Hg2+ due to the antagonism between Hg and Se, inspiring the establishment of a colorimetric method for Hg2+ detection. As for Hg2+ detection performance, the linear range (LR) and limit of detection (LOD) were 1-900 and 0.81 nM in the POD-like activity system, respectively. Also, 5-550 nM of LR and 2.34 nM of LOD were achieved in the OD-like activity system. Further, a smartphone-mediated portable RGB nanosensor was fabricated, with a LOD down to 6.65 nM in the POD-like system and 7.97 nM in the OD-like system. Moreover, the excellent self-calibration and satisfactory recovery of 94.77%-106.16% were shown in the application of real water samples analysis. This study represented advanced progress toward emerging applications of nanozymes with multiple enzyme-like activities in heavy metal detection and will accelerate the development of efficient and portable heavy metal sensors.

Light controlled self-escape capability of non-cationic carbon nitride-based nanosheets in lysosomes for hepatocellular carcinoma targeting stimulus-responsive gene delivery

High positive charge-induced toxicity, easy lysosomal degradation of nucleic acid drugs, and poor lesion sites targeting are major problems faced in the development of gene carriers. Herein, we proposed the concept of self-escape non-cationic gene carriers for targeted delivery and treatment of photocontrolled hepatocellular carcinoma (HCC) with sufficient lysosome escape and multiple response capacities. Functional DNA was bound to the surface of biotin-PEG2000-modified graphitic carbon nitride (Bio-PEG-CN) nanosheets to form non-cationic nanocomplexes Bio-PEG-CN/DNA. These nanocomposites could actively target HCC tissue. Once these nanocomplexes were taken up by tumor cells, the accumulated reactive oxygen species (ROS) generated by Bio-PEG-CN under LED irradiation would disrupt the lysosome structure, thereby facilitating nanocomposites escape. Due to the acidic microenvironment and lipase in the HCC tissue, the reversible release of DNA could be promoted to complete the transfection process. Meanwhile, the fluorescence signal of Bio-PEG-CN could be monitored in real time by fluorescence imaging technology to investigate the transfection process and mechanism. In vitro and in vivo results further demonstrated that these nanocomplexes could remarkably upregulate the expression of tumor suppressor protein P53, increased tumor sensitivity to ROS generated by nanocarriers, and realized effective gene therapy for HCC via loading P53 gene.

Development of nanozyme based sensors as diagnostic tools in clinic applications: a review

Since 1970, many artificial enzymes that imitate the activity and structure of natural enzymes have been discovered. Nanozymes are a group of nanomaterials with enzyme-mimetic properties capable of catalyzing natural enzyme processes. Nanozymes have attracted great interest in biomedicine due to their excellent stability, rapid reactivity, and affordable cost. The enzyme-mimetic activities of nanozymes may be modulated by numerous parameters, including the oxidative state of metal ions, pH, hydrogen peroxide (H2O2) level, and glutathione (GSH) concentration, indicating the tremendous potential for biological applications. This article delivers a comprehensive overview of the advances in the knowledge of nanozymes and the creation of unique and multifunctional nanozymes, and their biological applications. In addition, a future perspective of employing the as-designed nanozymes in biomedical and diagnostic applications is provided, and we also discuss the barriers and constraints for their further therapeutic use.

Sb-doped FeOCl nanozyme-based biosensor for highly sensitive colorimetric detection of glutathione

Nanozymes have been emerging as substitutes for natural enzymes to construct biosensors towards biomolecular detection. However, the detection of glutathione (GSH) by nanozyme-based biosensors still remains a great challenge for research on catalytic activity enhancement and the detection mechanism. In this work, Sb-doped iron oxychloride (Sb-FeOCl) with a well-defined nanorod-like structure is prepared by high-temperature calcination. Sb-FeOCl nanorods have high peroxidase-like activity, which can catalyze the decomposition of H₂O₂ into ·OH and then oxidize 3,3',5,5'-tetramethylbenzidine (TMB). In view of these intriguing observations, a reliable colorimetric method with a simple mixing and detection strategy is developed for the detection of GSH. The linear range of GSH detection is 1-36 μM. The detection limit of GSH reaches a low level of 0.495 μM (3σ/slope). The GSH sensing system also exhibits excellent specificity and anti-interference. Taking advantage of the advantages of the Sb-FeOCl nanorod-based biosensor, it can be used to quantitatively detect GSH levels in human serum. It can be anticipated that the Sb-FeOCl nanorods have broad prospects in the field of enzymatic biochemical reactions.

Two-Dimensional Ultrathin CeVO4 Nanozyme: Fabricated through Non-Oxidic Material

In recent years, the synthesis of materials in lower dimensions, like two-dimensional (2D) or ultrathin crystals, with distinctive characteristics has attracted substantial scientific attention. The mixed transition metal oxides (MTMOs) nanomaterials are the promising group of materials, which have been extensively utilized for various potential applications. Most of the MTMOs were explored as three-dimensional (3D) nanospheres, nanoparticles, one-dimensional (1D) nanorods, and nanotubes. However, these materials are not well explored in 2D morphology because of the difficulties in removing tightly woven thin oxide layers or exfoliations of 2D oxide layers, which hinder the exfoliation of beneficial features of MTMO. Here, through the exfoliation via Li⁺ ion intercalation and subsequent oxidation of CeVS₃ under hydrothermal condition, we have demonstrated a novel synthetic route for the fabrication of 2D ultrathin CeVO₄ NS. The as-synthesized CeVO₄ NS exhibit adequate stability and activity in a harsh reaction environment, which gives excellent peroxidase-mimicking activity with a K _M value of 0.04 mM, noticeably better than natural peroxidase and previously reported CeVO₄ nanoparticles. We have also used this enzyme mimic activity for the efficient detection of biomolecules like glutathione with a LOD of 53 nM.

Pd-Pt-Ru nanozyme with peroxidase-like activity for the detection of total antioxidant capacity

The design of highly active nanozymes and the establishment of ultra-sensitive bioassays remain a challenge. Therefore, it is necessary to synthesize highly active nanozymes. In this work, a Pd-Pt-Ru (PPR) nanozyme was prepared by atomic coating of the bimetallic nanozyme Pd-Pt. The steady-state kinetics showed that the PPR nanozyme had excellent peroxidase-like activity. Based on this concept, the as-prepared PPR nanozyme was applied to the detection of ascorbic acid (AA) and hydrogen peroxide (H₂O₂). The linear ranges for ascorbic acid and hydrogen peroxide were 2-12 μM and 5-40 mM, respectively. The limits of detection (LOD) are 1.13 μM and 2.79 mM, respectively. Ascorbic acid was used as a typical model to assay the total antioxidant capacity (TAC) of foods and several herbs. The Fructus Corni extract showed the highest reducing ability. The corresponding extracts were applied for the green synthesis of silver nanoparticles with a size of 167 nm. This study provides a method for the design of highly active nanozymes and the expansion of their applications.

MXene-Based Composites as Nanozymes in Biomedicine: A Perspective

MXene-based nanozymes have garnered considerable attention because of their potential environmental and biomedical applications. These materials encompass alluring and manageable catalytic performances and physicochemical features, which make them suitable as (bio)sensors with high selectivity/sensitivity and efficiency. MXene-based structures with suitable electrical conductivity, biocompatibility, large surface area, optical/magnetic properties, and thermal/mechanical features can be applied in designing innovative nanozymes with area-dependent electrocatalytic performances. Despite the advances made, there is still a long way to deploy MXene-based nanozymes, especially in medical and healthcare applications; limitations pertaining the peroxidase-like activity and sensitivity/selectivity may restrict further practical applications of pristine MXenes. Thus, developing an efficient surface engineering tactic is still required to fabricate multifunctional MXene-based nanozymes with excellent activity. To obtain MXene-based nanozymes with unique physicochemical features and high stability, some crucial steps such as hybridization and modification ought to be performed. Notably, (nano)toxicological and long-term biosafety analyses along with clinical translation studies still need to be comprehensively addressed. Although very limited reports exist pertaining to the biomedical potentials of MXene-based nanozymes, the future explorations should transition toward the extensive research and detailed analyses to realize additional potentials of these structures in biomedicine with a focus on clinical and industrial aspects. In this perspective, therapeutic, diagnostic, and theranostic applications of MXene-based nanozymes are deliberated with a focus on future perspectives toward more successful clinical translational studies. The current state-of-the-art biomedical advances in the use of MXene-based nanozymes, as well as their developmental challenges and future prospects are also highlighted. In view of the fascinating properties of MXene-based nanozymes, these materials can open significant new opportunities in the future of bio- and nanomedicine.

Lighting Up Agricultural Sustainability in the New Era through Nanozymology: An Overview of Classifications and Their Agricultural Applications

With the concept of sustainable agriculture receiving increasing attention from humankind, nanozymes, nanomaterials with enzyme-like activity but higher environmental endurance and longer-term stability than natural enzymes, have enabled agricultural technologies to be reformative, economic, and portable. Benefiting from their multiple catalytic activities and renewable nanocharacteristics, nanozymes can shine in agricultural scenarios using enzyme engineering and nanoscience, acting as sustainable toolboxes to improve agricultural production and reduce the risk to agricultural systems. Herein, we comprehensively discuss the classifications of nanozymes applied in current agriculture, including peroxidase-like, oxidase-like, catalase-like, superoxide dismutase-like, and laccase-like nanozymes, as well as their biocatalytic mechanisms. Especially, different applications of nanozymes in agriculture are deeply reviewed, covering crop protection and nutrition, agroenvironmental remediation and monitoring, and agroproduct quality monitoring. Finally, the challenges faced by nanozymes in agricultural applications are proposed, and we expect that our review can further enhance agricultural sustainability through nanozymology.

2D/3D-Shaped Fe0.8Ni0.2S2/ZIF-67 as a Nanozyme for Rapid Measurement of H2O2 and Ascorbic Acid with a Low Limit of Detection

Metal-organic frameworks (MOFs) can be used as ideal artificial nanozymes for an open structure to transfer substances and products. The nanozymic mechanism of MOFs needs further investigation for wide application. In this manuscript, no peroxidase-like activity was found for ZIF-67 (a kind of MOF), however, it enhanced the peroxidase-like activity of the Fe_0.8Ni_0.2S₂/ZIF-67 composite, in which Fe_0.8Ni_0.2S₂ was the active composition. The catalytic constant (K_cat) is higher at 1.98 (for TMB) and 2.08 (for H₂O₂) times and the catalytic efficiency (K_cat/K_m) is higher at 3.13 (for TMB) and 2.67 (for H₂O₂) times, than those of Fe_0.8Ni_0.2S₂. The K_m value decreased about 85 times (for H₂O₂) for Fe_0.8Ni_0.2S₂/ZIF-67 than that of horseradish peroxidase (natural enzyme). The mechanism was proposed. The limit of detection of H₂O₂ for Fe_0.8Ni_0.2S₂/ZIF-67 is 0.039 μM, which is lower by about 18.2 times than that of Fe_0.8Ni_0.2S₂. Simultaneously, Fe_0.8Ni_0.2S₂/ZIF-67 was used to rapidly detect ascorbic acid for only 1.0 min in food monitoring. This study may be important to design a new kind of nanozyme.

Photothermal Regulated Nanozyme of CuFeS2 Nanoparticles for Efficiently Promoting Wound Healing Infected by Multidrug Resistant Bacteria

Peroxidase-mediated chemokinetic therapy (CDT) can effectively resist bacteria; however, factors such as the high dosage of drugs seriously limit the antibacterial effect. Herein, CuFeS₂ nanoparticles (NPs) nanozyme antibacterial system with the photothermal effect and peroxidase-like catalytic activity are proposed as a combined antibacterial agent with biosafety, high-efficiency, and broad-spectrum antibacterial ability. In addition, the as-obtained CuFeS₂ NPs with a low doses of Cu⁺ and Fe³⁺ can change the permeability of bacterial cell membranes and break the antioxidant balance by consuming intracellular glutathione (GSH), which results in more conducive ROS production. Meanwhile, the photothermal heating can regulate the CuFeS₂ NPs close to their optimal reaction temperature (60 °C) to release more hydroxyl radical in low concentrations of H₂O₂ (100 µM). The proposed CuFeS₂ NPs-based antibacterial system achieve more than 99% inactivation efficiency of methicillin-resistant Staphylococcus aureus (10⁶ CFU mL⁻¹ MRSA), hyperspectral bacteria β-Escherichia coli (10⁶ CFU mL⁻¹ ESBL) and Pseudomonas aeruginosa (10⁶ CFU mL⁻¹ PA), even at low concentration (2 μg mL⁻¹), which is superior to those of the conventional CuO NPs at 4 mg mL⁻¹ reported in the literature. In vivo experiments further confirm that CuFeS₂ NPs can effectively treat wounds infected by MRSA and promote the wound healing. This study demonstrates that excellent antibacterial ability and good biocompatibility make CuFeS₂ NPs a potential anti-infection nanozyme with broad application prospects.

Mechanism and Application of Surface-Charged Ferrite Nanozyme-Based Biosensor toward Colorimetric Detection of l-Cysteine

Peroxidase-like nanozymes with robust catalytic capacity and detection specificity have been proposed as substitutes to natural peroxidases in biochemical sensing. However, the catalytic activity enhancement, detection mechanism, and application of nanozyme-based biosensors toward l-cysteine (l-Cys) detection still remain significant challenges. In this work, a doped ferrite nanozyme with well-defined structure and surface charges is fabricated by a two-step method of continuous flow coprecipitation and high-temperature annealing. The resulted ferrite nanozyme possesses an average size of 54.5 nm and a zeta-potential of 6.45 mV. A high-performance biosensor is manufactured based on the peroxidase-like catalytic feature of the doped ferrite. The ferrite nanozyme can oxidize the 3,3',5,5'-tetramethylbenzidine (TMB) with the assistance of H₂O₂ because of the instinctive capacity to decompose H₂O₂ into ·OH. The Michaelis-Menten constants (0.0911 mM for TMB, 0.140 mM for H₂O₂) of the ferrite nanozyme are significantly smaller than those of horseradish peroxidase. A reliable colorimetric method is established to selectively analyze l-Cys via a facile mixing-and-detecting methodology. The detection limit and linear range are 0.119 μM and 0.2-20 μM, respectively. Taking the merits of the ferrite nanozyme-based biosensors, the l-Cys level in the human serum can be qualitatively detected. It can be anticipated that the surface-charged ferrite nanozyme shows great application prospects in the fields of bioanalytical chemistry and point-of-care testing.

Understanding the bidirectional interactions between two-dimensional materials, microorganisms, and the immune system

Two-dimensional (2D) materials such as the graphene-based materials, transition metal dichalcogenides, transition metal carbides and nitrides (MXenes), black phosphorus, hexagonal boron nitride, and others have attracted considerable attention due to their unique physicochemical properties. This is true not least in the field of medicine. Understanding the interactions between 2D materials and the immune system is therefore of paramount importance. Furthermore, emerging evidence suggests that 2D materials may interact with microorganisms - pathogens as well as commensal bacteria that dwell in and on our body. We discuss the interplay between 2D materials, the immune system, and the microbial world in order to bring a systems perspective to bear on the biological interactions of 2D materials. The use of 2D materials as vectors for drug delivery and as immune adjuvants in tumor vaccines, and 2D materials to counteract inflammation and promote tissue regeneration, are explored. The bio-corona formation on and biodegradation of 2D materials, and the reciprocal interactions between 2D materials and microorganisms, are also highlighted. Finally, we consider the future challenges pertaining to the biomedical applications of various classes of 2D materials.

Vanadium Disulfide Nanosheet Boosts Optical Signal Brightness as a Superior Enzyme Label to Improve the Sensitivity of Lateral Flow Immunoassay

The color-enzyme lateral flow immunoassay (LFIA) has attracted widespread attention to expand the detection range and improve sensitivity via amplifying the color signal after catalyzing the substrate. As a kind of layered transition-metal dichalcogenide (TMD), the vanadium disulfide nanosheet (VS₂NS) possesses superior peroxidase-like catalytic activity. Here, a VS₂NS was applied as an enzyme label in the LFIA to detect 17β-estradiol (E2). Compared to natural horseradish peroxidase, the VS₂NS expresses a more prominent enzyme catalytic performance, stability, and adsorption ability. Under optimal conditions, the calculated limit of detection (cLOD) of the VS₂NS-based LFIA is 0.065 ng mL^-1 for E2, which is sixfold lower than that of the optimized colloidal nanoparticle-based LFIA (cLOD = 0.406 ng mL^-1). Besides, the detection linear range of the VS₂NS-based LFIA can be widened by 1.5 times after the catalytic reaction. Moreover, the VS₂NS-based LFIA exhibits excellent practicability in real sample detection. Simultaneously, this study helps open up the application of the VS₂NS in the trace analysis of LFIAs, which can broaden TMDs' scope of application and better show their properties of color enzymes.

Recent advances in biomedical applications of 2D nanomaterials with peroxidase-like properties

Significant progress has been made in developing two-dimensional (2D) nanomaterials owing to their ultra-thin structure, high specific surface area, and many other advantages. Recently, 2D nanomaterials with enzyme-like properties, especially peroxidase (POD)-like activity, are highly desirable for many biomedical applications. In this review, we first classify the types of 2D POD-like nanomaterials and then summarize various strategies for endowing 2D nanomaterials with POD-like properties. Representative examples of biomedical applications are reviewed, emphasizing in antibacterial, biosensing, and cancer therapy. Last, the future challenges and prospects of 2D POD-like nanomaterials are discussed. This review is expected to provide an in-depth understanding of 2D POD-like materials for biomedical applications.

2D material-based peroxidase-mimicking nanozymes: catalytic mechanisms and bioapplications

The boom in nanotechnology brings new insights into the development of artificial enzymes (nanozymes) with ease of modification, lower manufacturing cost, and higher catalytic stability than natural enzymes. Among various nanomaterials, two-dimensional (2D) nanomaterials exhibit promising enzyme-like properties for a plethora of bioapplications owing to their unique physicochemical characteristics of tuneable composition, ultrathin thickness, and huge specific surface area. Herein, we review the recent advances in several 2D material-based nanozymes, such as carbonaceous nanosheets, metal-organic frameworks (MOFs), transition metal dichalcogenides (TMDs), layered double hydroxides (LDHs), and transition metal oxides (TMOs), clarify the mechanisms of peroxidase (POD)-mimicking catalytic behaviors, and overview the potential bioapplications of 2D nanozymes.

Electrochemical Signal Substance for Multiplexed Immunosensing Interface Construction: A Mini Review

Appropriate labeling method of signal substance is necessary for the construction of multiplexed electrochemical immunosensing interface to enhance the specificity for the diagnosis of cancer. So far, various electrochemical substances, including organic molecules, metal ions, metal nanoparticles, Prussian blue, and other methods for an electrochemical signal generation have been successfully applied in multiplexed biosensor designing. However, few works have been reported on the summary of electrochemical signal substance applied in constructing multiplexed immunosensing interface. Herein, according to the classification of labeled electrochemical signal substance, this review has summarized the recent state-of-art development for the designing of electrochemical immunosensing interface for simultaneous detection of multiple tumor markers. After that, the conclusion and prospects for future applications of electrochemical signal substances in multiplexed immunosensors are also discussed. The current review can provide a comprehensive summary of signal substance selection for workers researched in electrochemical sensors, and further, make contributions for the designing of multiplexed electrochemical immunosensing interface with well signal.

Nucleoside-regulated catalytic activity of copper nanoclusters and their application for mercury ion detection

In this work, a novel method for the synthesis of copper nanoclusters is developed using nucleosides as templates and hydroxylamine hydrochloride as the reductant. Various nucleosides can regulate the catalytic activity of copper nanoclusters.

Recent Advances in Nanozymes for Bacteria-Infected Wound Therapy

Bacterial-infected wounds are a serious threat to public health. Bacterial invasion can easily delay the wound healing process and even cause more serious damage. Therefore, effective new methods or drugs are needed to treat wounds. Nanozyme is an artificial enzyme that mimics the activity of a natural enzyme, and a substitute for natural enzymes by mimicking the coordination environment of the catalytic site. Due to the numerous excellent properties of nanozymes, the generation of drug-resistant bacteria can be avoided while treating bacterial infection wounds by catalyzing the sterilization mechanism of generating reactive oxygen species (ROS). Notably, there are still some defects in the nanozyme antibacterial agents, and the design direction is to realize the multifunctionalization and intelligence of a single system. In this review, we first discuss the pathophysiology of bacteria infected wound healing, the formation of bacterial infection wounds, and the strategies for treating bacterially infected wounds. In addition, the antibacterial advantages and mechanism of nanozymes for bacteria-infected wounds are also described. Importantly, a series of nanomaterials based on nanozyme synthesis for the treatment of infected wounds are emphasized. Finally, the challenges and prospects of nanozymes for treating bacterial infection wounds are proposed for future research in this field.

Amplified Peroxidase-like Activity of Co2+ Using 8-Hydroxyquinoline and Its Application for Ultrasensitive Colorimetric Detection of Clioquinol

8-Hydroxyquinoline (8HQ) and its derivatives display diverse bioactivities and therapeutic potentials. In this study, we unveiled that 8HQ can boost the peroxidase-like activity of Co²⁺ in the presence of bicarbonate (HCO₃ ^- ) in neutral pH at room temperature. With 2,2'-azino-bis-(3-ethylbenzothiazoline-6-sulphonate) (ABTS) as the substrate, the formed Co²⁺ /8HQ/HCO₃ ^- complex shows robust catalytic activity with the turnover number (k_cat ) tens to hundreds of times higher than that of Co₃ O₄ and other Co²⁺ complexes in terms of per cobalt ion. This system was used to design colorimetric sensors for ultrasensitive detection of 8HQ-based drugs by activating the activity of Co²⁺ . Take detecting clioquinol as an example, a detection limit of 2.4 nM clioquinol with a linear range from 0.01 to 0.2 μM was obtained. This work not only revealed a new kind of ligand that activated the activity of Co²⁺ , but also provided a facile, low-cost, ultrasensitive, easy-to-use, and universal strategy for sensing various 8HQ-based drugs. Further development of this catalytic system might be beneficial to overcome drug resistance by combined medication.

Fabrication of eco-friendly chitosan functionalized few-layered WS2 nanocomposite implanted with ruthenium nanoparticles for in vitro antibacterial and anticancer activity: Synthesis, characterization, and pharmaceutical applications

The abundance of two-dimensional (2D) components has provided them with a broad material platform for building nano and atomic-level applications. So, 2D nanomaterials are unique because of their physicochemical properties. Over many years, graphene is a conventional 2D layered element that has significant attention in the scientific community. In recent years numerous new 2D nanomaterials other than graphene have been reported. The study of 2D nanomaterials is also in its infant stages, with the majority of research focusing on the explanation of special material properties, but very few articles are focusing on the biological applications of 2D nanomaterials. As a result, we focused on the transition metal dichalcogenides (TMDCs) such as MoS₂ and WS₂, which were emerging and exciting groups of elements with display great opportunities in several fields, such as cancer nanomedicine. Herein, we synthesized biologically active CS/WS₂/Ru composite by liquid exfoliation approach. The CS/WS₂/Ru composites exhibit significant antibacterial action towards (S. aureus, and E. coli) bacteria. Also, the composite suggests synergetic anticancer action against MCF-7 cancer cells. These reports are possible to explore the innovative aspects of biological outcomes in carcinological applications.

Three-dimensional MoS2 nanoflowers supported Prussian blue and Au nanoparticles: A peroxidase-mimicking catalyst for the colorimetric detection of hydrogen peroxide and glucose

Well-dispersed Prussian blue (PB) and Au nanoparticles (Au NPs) loaded three dimensional MoS₂ nanoflowers (PB-Au@MoS₂ NFs) was synthesized by a simple and economical method. The structure, morphology and composition of the hybrid were characterized by XRD, SEM and EDS. Similar to the reported literature, MoS₂ nanoflowers showed peroxidase-like activity in catalyzing the oxidation of 3,3',5,5'-tetramethylbenzidine (TMB). This peroxidase-mimicking activity could be enhanced with the introduction of PB and Au NPs. Herein, PB-Au@MoS₂ NFs could be used to establish a new platform for the determination of H₂O₂ and glucose by the chromogenic reaction. Wide linear ranges with 0-15 μM and 0-120 μM for H₂O₂ and glucose detection were finally obtained. The detection limits were as low as 0.25 μM and 3 μM (with signal to noise ratio of 3), respectively. The established platform was also used successfully for the determination of glucose in human serum and fruit juice samples with excellent sensitivity and stability.

Recent advance in the fabrication of carbon nanofiber-based composite materials for wearable devices

Carbon nanofibers (CNFs) exhibit the advantages of high mechanical strength, good conductivity, easy production, and low cost, which have shown wide applications in the fields of materials science, nanotechnology, biomedicine, tissue engineering, sensors, wearable electronics, and other aspects. To promote the applications of CNF-based nanomaterials in wearable devices, the flexibility, electronic conductivity, thickness, weight, and bio-safety of CNF-based films/membranes are crucial. In this review, we present recent advances in the fabrication of CNF-based composite nanomaterials for flexible wearable devices. For this aim, firstly we introduce the synthesis and functionalization of CNFs, which promote the optimization of physical, chemical, and biological properties of CNFs. Then, the fabrication of two-dimensional and three-dimensional CNF-based materials are demonstrated. In addition, enhanced electric, mechanical, optical, magnetic, and biological properties of CNFs through the hybridization with other functional nanomaterials by synergistic effects are presented and discussed. Finally, wearable applications of CNF-based materials for flexible batteries, supercapacitors, strain/piezoresistive sensors, bio-signal detectors, and electromagnetic interference shielding devices are introduced and discussed in detail. We believe that this work will be beneficial for readers and researchers to understand both structural and functional tailoring of CNFs, and to design and fabricate novel CNF-based flexible and wearable devices for advanced applications.

Urate oxidase loaded in PCN-222(Fe) with peroxidase-like activity for colorimetric detection of uric acid

In the past two decades, the number of reports on the construction of uric acid (UA) sensors has increased dramatically, as it is a vital factor in the diagnosis of physiological functions and diseases. Among these sensors, cascade colorimetric detection based on peroxidase mimics has received great attention owing to the advantages of easier operation and more intuitive results. Herein, we report a simple UA detection method via the integration of urate oxidase (UOx) and PCN-222(Fe) with peroxidase-like activity, in which UOx is immobilized in PCN-222(Fe) by physical adsorption. UOx could catalyze the UA oxidation to produce H₂O₂, and then PCN-222(Fe) catalyzed the oxidation of 3,3',5,5'-tetramethylbenzidine (TMB) in the presence of H₂O₂ to generate a blue product with a maximum absorbance at 652 nm. Under optimal conditions, the increasing absorbance at 652 nm was proportional to the UA concentration. The linear range for UA detection was 10-800 μM with a limit of detection of 3.5 μM, and the cascade system has been successfully utilised for the detection of UA in human serum samples to demonstrate the accuracy of the proposed method. In conclusion, the cascade catalytic system based on the immobilization of UOx in PCN-222(Fe) has the potential to be used as a rapid and sensitive sensor for UA detection.

Self-cascade MoS2 nanozymes for efficient intracellular antioxidation and hepatic fibrosis therapy

Cascade biocatalytic reactions involving multiple antioxidative enzymes are necessary in living cells to regulate cellular metabolism and redox homeostasis. Substantial efforts have been made to construct cascade reactions through engineered enzyme mimics to improve intracellular metabolic flux, especially under pathophysiological conditions. Here, we show that MoS₂ nanozymes exhibit activities of four major cellular cascade antioxidant enzymes, including superoxide dismutase, catalase, peroxidase, and glutathione peroxidase. Meanwhile, MoS₂ nanozymes attenuate electron transfer in cytochrome c/H₂O₂ to ameliorate the inherent antioxidant defense system under stress conditions. Thus, MoS₂ nanozymes function as a self-cascade platform to inhibit intracellular reactive oxygen species (ROS) production by modulating mitochondrial function and scavenging abundant ROS through their intrinsic antioxidant capacity. Density functional theory calculations reveal the underlying mechanisms of the intracellular environment-dependent catalase-like activity of MoS₂ nanozymes. Furthermore, we find that the MoS₂ nanozymes play a cytoprotective role in cells and significantly improve the treatment outcomes in a hepatic fibrosis mouse model. These results demonstrate the ROS-scavenging capacity of a single-component MoS₂ nanozyme-based cascade reaction system and reveal the in-depth mechanism, which may advance the development of nanozyme-based antioxidative agents.

Two-Dimensional Material-Based Colorimetric Biosensors: A Review

Two-dimensional (2D) materials such as graphene, graphene oxide, transition metal oxide, MXene and others have shown high potential for the design and fabrication of various sensors and biosensors due to their 2D layered structure and unique properties. Compared to traditional fluorescent, electrochemical, and electrical biosensors, colorimetric biosensors exhibit several advantages including naked-eye determination, low cost, quick response, and easy fabrication. In this review, we present recent advances in the design, fabrication, and applications of 2D material-based high-performance colorimetric biosensors. Potential colorimetric sensing mechanisms and optimal material selection as well as sensor fabrication are introduced in brief. In addition, colorimetric biosensors based on different 2D materials such as graphene, transition metal dichalcogenide/oxide, MXenes, metal-organic frameworks, and metal nanoplates for the sensitive detection of DNA, proteins, viruses, small molecules, metallic ions, and others are presented and discussed in detail. This work will be helpful for readers to understand the knowledge of 2D material modification, nanozymes, and the synthesis of hybrid materials; meanwhile, it could be valuable to promote the design, fabrication, and applications of 2D material-based sensors and biosensors in quick bioanalysis and disease diagnostics.

Nanozymes-Hitting the Biosensing "Target"

Nanozymes are a class of artificial enzymes that have dimensions in the nanometer range and can be composed of simple metal and metal oxide nanoparticles, metal nanoclusters, dots (both quantum and carbon), nanotubes, nanowires, or multiple metal-organic frameworks (MOFs). They exhibit excellent catalytic activities with low cost, high operational robustness, and a stable shelf-life. More importantly, they are amenable to modifications that can change their surface structures and increase the range of their applications. There are three main classes of nanozymes including the peroxidase-like, the oxidase-like, and the antioxidant nanozymes. Each of these classes catalyzes a specific group of reactions. With the development of nanoscience and nanotechnology, the variety of applications for nanozymes in diverse fields has expanded dramatically, with the most popular applications in biosensing. Nanozyme-based novel biosensors have been designed to detect ions, small molecules, nucleic acids, proteins, and cancer cells. The current review focuses on the catalytic mechanism of nanozymes, their application in biosensing, and the identification of future directions for the field.

A fluorimetric and colorimetric dual-signal sensor for hydrogen peroxide and glucose based on the intrinsic peroxidase-like activity of cobalt and nitrogen co-doped carbon dots and inner filter effect

Herein, cobalt and nitrogen co-doped carbon dots (Co-N-CDs) were fabricated via a one-pot hydrothermal approach. The obtained Co-N-CDs displayed peroxidase-like activity and fluorescence properties. It could catalyze the oxidization of guaiacol (GA) in the presence of hydrogen peroxide (H₂O₂), and thus, resulted in color change, accompanied by a new absorption peak in 470 nm. Owing to the inner filter effect, the oxidized product of GA (known as 2-PQ) largely absorbed the Co-N-CD fluorescence which was excited at 380 nm. Such changes in absorbance and fluorescence intensity were H₂O₂ concentration-dependent. Specifically, H₂O₂ could be generated by glucose oxidase to catalyze the oxidation of glucose, and thus, a colorimetric and fluorimetric sensor for glucose was established with high selectivity and excellent sensitivity. After the optimization of experimental conditions, this colorimetric sensor has a good linear range from 2 to 100 μM for glucose and the detection limit was 1.16 μM. Besides, the linear relationship between the fluorescence quenching value (ΔF) and the glucose concentration (0.4-40 μM) was obtained with a detection limit of 0.18 μM. Meanwhile, the proposed sensor has also been successfully applied for glucose detection in human serum samples, and the results were consistent with those of the standard method.

Ice-Templated Large-Scale Preparation of Two-Dimensional Sheets of Conjugated Polymers: Thickness-Independent Flexible Supercapacitance

Two-dimensional (2D) organic materials hold great promise for use in a multitude of contemporary applications due to their outstanding chemical and physical properties. Herein, 2D sheets of poly(3,4-ethylenedioxythiophene):poly(4-styrenesulfonate) (PEDOT:PSS) are prepared from a commercially available PEDOT:PSS suspension using ice as a template. The 2D PEDOT:PSS sheets grow in the boundaries of ice crystals as the polymers are "squeezed" out of the suspension when the water solidifies. The mechanical robustness of the sheets can be enhanced by incorporating WO₃ nanowires, and the PSS component can be conveniently removed with a concentrated solution of H₂SO₄ to afford stable suspensions of PEDOT or WO₃@PEDOT sheets, either of which can be converted into flexible films with tunable thicknesses via filtration. Swagelok- or pouch-type supercapacitor devices prepared from the WO₃@PEDOT films exhibit outstanding energy-storage characteristics, including high rate capability, thickness-independent energy storage (e.g., 701 mF cm^-2 is achieved with a 1-mm-thick film), high resistance toward mechanical deformation, and good cycling stability. Additionally, a high energy density of 0.083 mWh cm^-2 is measured for a device prepared using a 1-mm-thick film at a high power density of 10 mW cm^-2. The methodology described establishes an efficient and readily scalable approach for accessing 2D organic sheets.

Development and demonstration of functionalized inorganic-organic hybrid copper phosphate nanoflowers for mimicking the oxidative reactions of metalloenzymes by working as a nanozyme

Copper phosphate nanoflowers (CuPNFs) have been synthesized in the presence of different aromatic phenanthroline derivatives (Ln), leading to inorganic-organic hybrid materials (Ln-CuPNFs). Studies revealed that the morphology of nanoflowers varies as a function of the aromatic moiety present in the derivative, Ln (where 'n' corresponds to phenyl, naphthyl, anthracenyl, and pyrenyl) used for coating the nanomaterial. Other noticeable changes were the increase in the size of the flower by ∼2-3 fold in the presence of these derivatives. In the absence of such aromatic phenanthroline derivatives, i.e., the use of 1,10-phenanthroline-5-amine did not induce the formation of nanoflowers, suggesting that the organic derivatization used in the present study stabilizes the nanoflower structure. Nanoflowers were characterized using X-ray diffraction, Brunauer-Emmett-Teller (BET) isotherm, X-ray photoelectron spectroscopy, Raman and Infrared spectroscopy, scanning electron microscopy, and transmission electron microscopy, thus covering a range of diffraction, spectroscopy, and microscopy techniques. Nanoflowers, Ln-CuPNFs, have been demonstrated for the oxidative reactions mimicking copper metalloenzymes in the presence and absence of hydrogen peroxide using different substrates. Thus, hybrid Ln-CuPNFs mediate the complete oxidation of o-phenylenediamine, dopamine, ascorbate oxidase, and terephthalic acid without causing much change in the morphology of the hybrid nanoflower material and with the retention of the activity supporting the hybrid as an acceptable enzyme mimicking material. Oxidation is mediated through hydroxyl radical formation and the order of the oxidative activity is pyrenyl > anthracenyl > naphthyl > phenyl for the inorganic-organic hybrid nanoflowers. The copper complex of pyrenyl-appended phenanthroline derivative also showed similar biomimetic activity.