Purification of exopolysaccharide produced from Lactobacillus spp. using ionic-liquid as adjuvant in alcohol/salt-based aqueous two-phase system for its antidiabetic properties

Diabetes is a chronic, metabolic disease characterized by hyperglycemia resulting from either insufficient insulin production or impaired cellular response to insulin. Exopolysaccharides (EPS) produced by Lactobacillus spp. demonstrated promising therapeutic potential in terms of their anti-diabetic properties. Extraction and purification of EPS produced by Lactobacillus acidophilus and Limosilactobacillus reuteri were performed using ethanol precipitation, followed by alcohol/salt based aqueous two-phase system (ATPS). The purification process involved ethanol precipitation followed by an alcohol/salt-based ATPS. The study systematically investigated various purification parameters in ATPS, including ethanol concentration, type and concentration of ionic liquid, type and concentration of salt and pH of salt. Purified EPS contents from L. acidophilus (63.30 μg/mL) and L. reuteri (146.48 μg/mL) were obtained under optimum conditions of ATPS which consisted of 30 % (w/w) ethanol, 25 % (w/w) dipotassium hydrogen phosphate at pH 10 and 2 % (w/w) 1-butyl-3-methylimidazolium octyl sulfate. The extracted EPS content was determined using phenol sulphuric acid method. In α-amylase inhibition tests, the inhibitory rate was found to be 92.52 % (L. reuteri) and 90.64 % (L. acidophilus), while in α-glucosidase inhibition tests, the inhibitory rate was 73.58 % (L. reuteri) and 68.77 % (L. acidophilus), based on the optimized parameters selected in ATPS. These results suggest that the purified EPS derived from the postbiotics of Lactobacillus spp. hold promise as potential antidiabetic agents.

Preparation, Agricultural Bioactivity Evaluation, Structure-Activity Relationships Estimation, and Molecular Docking of Some Quinazoline Compounds

Quinazoline compounds have gained significant attention in the fields of agriculture and chemistry due to their diverse activities. In this study, we focused on a series of quinazoline derivatives (4a-l). The objectives involved multiple aspects, including preparation, evaluation of their agricultural bioactivity against the maize aphid (Rhopalosiphum maidis), estimation of the structure-activity relationships (SAR), and conducting molecular docking analysis. The results of the agricultural bioactivities revealed that compound (4b) possesses the highest insecticidal activity, and the other compounds have good potential as insecticidal agents. We conducted the SARs and also molecular docking investigation to elucidate the binding modes and interactions of these compounds with target proteins relevant to the agricultural bioactivity. The docking results provided valuable information on the binding affinities and molecular interactions, aiding in the rationalization of the observed bioactivity trends. The enzyme, acetylcholinesterase (AChE), was docked with the 12 synthetic compounds (4a-l). Among these compounds, (4b), (4i), and (4e)exhibited the highest binding affinity, with docking scores (S) of -7.96, -7.83, and -7.73 kcal/mol, respectively. They were followed by compounds (4d) (S = -7.57 kcal/mol), (4c) (S = -7.53 kcal/mol), (4g) (S = -7.34 kcal/mol), (4f) (S = -7.23 kcal/mol), (4h) (S = -7.14 kcal/mol), (4k) (S = -6.61 kcal/mol), (4j) (S = -6.57 kcal/mol), (4a) (S = -6.28 kcal/mol), and finally (4l) (S = -6.01 kcal/mol). These compounds were shown to have a variety of binding interactions within the 2ACE active site, as evidenced by protein-ligand docking configurations. This study gives evidence that those compounds have AChE-inhibitory capabilities and, hence, may be used for AChE-targeting development. Also, the findings in this study highlight the potential of these compounds as agricultural agents and provide valuable insights for the design and development of some quinazoline derivatives with enhanced bioactivity for crop protection.

Polymerization strategy for cellulose nanocrystals-based photonic crystal films with water resisting property

Cellulose nanocrystals (CNCs) can form a liquid crystal film with a chiral nematic structure by evaporative-induced self-assembly (EISA). It has attracted much attention as a new class of photonic liquid crystal material because of its intrinsic, unique structural characteristics, and excellent optical properties. However, the CNCs-based photonic crystal films are generally prepared via the physical crosslinking strategy, which present water sensitivity. Here, we developed CNCs-g-PAM photonic crystal film by combining free radical polymerization and EISA. FT-IR, SEM, POM, XRD, TG-DTG, and UV-Vis techniques were employed to characterize the physicochemical properties and microstructure of the as-prepared films. The CNCs-g-PAM films showed a better thermo-stability than CNCs-based film. Also, the mechanical properties were significantly improved, viz., the elongation at break was 9.4 %, and tensile strength reached 18.5 Mpa, which was a much better enhancement than CNCs-based film. More importantly, the CNCs-g-PAM films can resist water dissolution for more than 24 h, which was impossible for the CNCs-based film. The present study provided a promising strategy to prepare CNCs-based photonic crystal film with high flexibility, water resistance, and optical properties for applications such as decoration, light management, and anti-counterfeiting.

Advances in alginate lyases and the potential application of enzymatic prepared alginate oligosaccharides: A mini review

Alginate is mainly a linear polysaccharide composed of randomly arranged β-D-mannuronic acid and α-L-guluronic acid linked by α, β-(1,4)-glycosidic bonds. Alginate lyases degrade alginate mainly adopting a β-elimination mechanism, breaking the glycosidic bonds between the monomers and forming a double bond between the C4 and C5 sugar rings to produce alginate oligosaccharides consisting of 2-25 monomers, which have various physiological functions. Thus, it can be used for the continuous industrial production of alginate oligosaccharides with a specific degree of polymerization, in accordance with the requirements of green exploitation of marine resources. With the development of structural analysis, the quantity of characterized alginate lyase structures is progressively growing, leading to a concomitant improvement in understanding the catalytic mechanism. Additionally, the use of molecular modification methods including rational design, truncated expression of non-catalytic domains, and recombination of conserved domains can improve the catalytic properties of the original enzyme, enabling researchers to screen out the enzyme with the expected excellent performance with high success rate and less workload. This review presents the latest findings on the catalytic mechanism of alginate lyases and outlines the methods for molecular modifications. Moreover, it explores the connection between the degree of polymerization and the physiological functions of alginate oligosaccharides, providing a reference for enzymatic preparation development and utilization.

Review of studies on polysaccharides, lignins and small molecular compounds from three Polygonatum Mill. (Asparagaceae) spp. in crude and processed states

Since ancient times, Polygonatum Mill. (Asparagaceae) has been utilized as a medicinal and culinary resource in China. Its efficacy in treating various illnesses has been well documented. Traditional processing involves the Nine-Steam-Nine-Bask method, which results in a reduction of toxicity and enhanced effectiveness of Polygonatum. Many substances, such as polysaccharides, lignins, saponins, homoisoflavones, alkaloids, and others, have been successfully isolated from Polygonatum. This review presents the research progress on the chemical composition of three crude and processed Polygonatum, including Polygonatum sibiricum Redouté (P. sibiricum), Polygonatum kingianum Collett & Hemsl (P. kingianum), and Polygonatum cyrtonema Hua (P. cyrtonema). The review also includes the pharmacology of Polygonatum, specifically on the pharmacology of polysaccharides both before and after processing. Its objective is to provide a foundation for uncovering the significance of the processing procedure, and to facilitate the development and utilization of Polygonatum in clinical practice.

Green potassium fertilizer from enzymatic hydrolysis lignin: Effects of lignin fractionation on wheat seed germination and seedling growth

Sustainably sourced lignin presents great potential as a green feedstock for fertilizer production but commercial fulfillment is still challenging owing to the mediocre fertilizer activity of lignin. To address this issue, an effective strategy to enhance the activity of lignin-based potassium fertilizer (LPF) is proposed through lignin fractionation. Three lignin fractions subdivided from enzymatic hydrolysis lignin (EHL) were adopted as the feedstock for LPF preparation, and the effect of lignin fractionation on wheat seed germination and seedling growth was investigated. Compared with the potassium fertilizer from unfractionated lignin, LPF-F1 showed significantly improved effects on promoting seed germination and seedling growth, which can be attributed to the high potassium content resulted from its abundant phenolic hydroxyl and carboxyl contents. Under the optimal treatment concentration (100 mg/L), LPF-F1 showed comparable promotion effect to commercial fulvic acid potassium on wheat seedling growth, suggesting the potential of LPF-F1 as commercial potassium fertilizer. Overall, this work reveals that lignin heterogeneity presents critical effects on the wheat seed germination and seedling growth of LPF, and the fertilizer activity of LPF can be substantially improved using fractionated lignin with low molecular weight as the raw material.

Extraction, purification, structural characterization, and bioactivities of the genus Schisandra polysaccharides: A review

The genus Schisandra, a member of the Magnoliaceae family, is a well-known tonic traditional Chinese medicine with a long history of traditional medicinal and functional food used in China. Polysaccharides are one of its main active constituents, which have a wide range of bioactivities, such as anti-inflammatory, anti-tumor, neuroprotection, anti-diabetes, hepatoprotection, immunomodulation, and anti-fatigue. In this paper, we review the extraction, isolation, purification, structural characterization, bioactivities, as well as structure-activity relationship of polysaccharides from the genus Schisandra. In conclusion, we hope that this review could provide reference for the subsequent research on structural, bioactivities, development and application of the genus Schisandra polysaccharides.

Sandwiched film of graphene/silver nanowire conductive layer reinforced by hydroxyethyl cellulose bond layer

Multilayer nanocomposite film made of different materials has multifunctional properties and is applied in the field of flexible electronic devices. Herein, hydroxyethyl cellulose (HEC) and boron nitride nanosheets (BNNS) were used as the matrix and thermal conductivity material of the HEC/BNNS (HB) insulation layer and were combined with conductive blade structure graphene/silver nanowires (GA) film to prepare a three-layer HB/GA20/HB film. Using the high mechanical properties of the HEC based film, the tensile strength of the three-layer film is increased to 22.0 MPa, 633 % higher than that of the pure conductive film. The sensor prepared by multilayer film has good bending sensing performance (1500 cycles) and electromagnetic shielding performance (29.3 dB). The heating temperature of HB/GA20/HB film heater is up to 107.9 °C at 20 V. In the HB/GA20/HB film, the external HB layer provides insulation, thermal conductivity and physical support, and the internal GA layer with good conductive and sensing properties is combined to build a multi-functional sensor, which can be applied as a mobile sensor, heater and electromagnetic shielding material in the flexible wearable field.

Polarity and functionality tailored conjugated microporous polymer coatings on silica microspheres for enhanced pollutant adsorption

Many sources of pollution that are generated by modern society are not addressable by conventional methods. Especially organic compounds, like pharmaceutics, are particularly hard to remove from waterbodies. Herein, a new approach is presented using conjugated microporous polymers (CMPs) to coat silica microparticles yielding specifically tailored adsorbents. The CMPs are generated with three different monomers: 2,6-dibromonaphthalene (DBN), 2,5-dibromoaniline (DBA) and 2,5-dibromopyridine (DBPN) respectively coupled to 1,3,5-triethynylbenzene (TEB) via Sonogashira coupling. By optimizing the polarity of the silica surface, all three CMPs were converted into microparticle coatings. The resulting hybrid materials feature the advantages of being adjustable in polarity and functionality, as well as morphology. Sedimentation allows facile removal of the coated microparticles after the adsorption. Further, the expansion of the CMP to a thin coating increases the accessible surface area compared to the bulk material. These effects were demonstrated by the adsorption of the model drug diclofenac. Thereby, the aniline-based CMP proved to be most advantageous due to a secondary crosslinking mechanism of amino and alkyne functionalities. An outstanding adsorption capacity of 228 mg diclofenac per gram of the aniline CMP within the hybrid material was achieved. This represents a five-fold increase compared to the value obtained by the pure CMP material underlining the advantages of the hybrid material.

π-Electron-Extended Triazine-Based Covalent Organic Framework as Photocatalyst for Organic Pollution Degradation and H2 Production from Water

Herein, we report the efficient preparation of π-electron-extended triazine-based covalent organic framework (TFP-TPTPh COF) for photocatalysis and adsorption of the rhodamine B (RhB) dye molecule, as well as for photocatalytic hydrogen generation from water. The resultant TFP-TPTPh COF exhibited remarkable porosity, excellent crystallinity, high surface area of 724 m2 g−1, and massive thermal stability with a char yield of 63.41%. The TFP-TPTPh COF demonstrated an excellent removal efficiency of RhB from water in 60 min when used as an adsorbent, and its maximum adsorption capacity (Qm) of 480 mg g−1 is among the highest Qm values for porous polymers ever to be recorded. In addition, the TFP-TPTPh COF showed a remarkable photocatalytic degradation of RhB dye molecules with a reaction rate constant of 4.1 × 10−2 min−1 and an efficiency of 97.02% under ultraviolet–visible light irradiation. Furthermore, without additional co-catalysts, the TFP-TPTPh COF displayed an excellent photocatalytic capacity for reducing water to generate H2 with a hydrogen evolution rate (HER) of 2712 μmol g−1 h−1. This highly active COF-based photocatalyst appears to be a useful material for dye removal from water, as well as solar energy processing and conversion.

Facile metal-free synthesis of pyrrolo[3,2-b]pyrrolyl-based conjugated microporous polymers for high-performance photocatalytic degradation of organic pollutants

An efficient and metal-free approach to the synthesis of new kinds of CMPs (pyrrolo[3,2-b]pyrrolyl-based CMPs) on a gram scale within a short time has been developed for remarkable adsorbent and photocatalytic degradation of organic pollutants.