Reducing the resistance for the use of electrochemical impedance spectroscopy analysis in materials chemistry

Electrochemical genosensor based on RNA-responsive human telomeric G-quadruplex DNA: A proof-of-concept with SARS-CoV-2 RNA

In this report, a facile and label-free electrochemical RNA biosensor is developed by exploiting methylene blue (MB) as an electroactive positive ligand of G-quadruplex. The electrochemical response mechanism of the nucleic acid assay was based on the change in differential pulse voltammetry (DPV) signal of adsorbed MB on the immobilized human telomeric G-quadruplex DNA with a loop that is complementary to the target RNA. Hybridization between synthetic positive control RNA and G-quadruplex DNA probe on the transducer platform rendered a conformational change of G-quadruplex to double-stranded DNA (dsDNA), and increased the redox current of cationic MB π planar ligand at the sensing interface, thereby the electrochemical signal of the MB-adsorbed duplex is proportional to the concentration of target RNA, with SARS-CoV-2 (COVID-19) RNA as the model. Under optimal conditions, the target RNA can be detected in a linear range from 1 zM to 1 μM with a limit of detection (LOD) obtained at 0.59 zM for synthetic target RNA and as low as 1.4 copy number for positive control plasmid. This genosensor exhibited high selectivity towards SARS-CoV-2 RNA over other RNA nucleotides, such as SARS-CoV and MERS-CoV. The electrochemical RNA biosensor showed DPV signal, which was proportional to the 2019-nCoV_N_positive control plasmid from 2 to 200000 copies (R2 = 0.978). A good correlation between the genosensor and qRT-PCR gold standard was attained for the detection of SARS-CoV-2 RNA in terms of viral copy number in clinical samples from upper respiratory specimens.

Oxidative MnO2 Template Assisted Electrochemical Fabrication of Graphene/Polypyrrole Supercapacitor Electrodes

Improving the morphological structure of active materials is a reliable strategy for the fabrication of high-performance supercapacitor electrodes. In this study, we introduce a feasible approach to constructing the graphene/polypyrrole (PPy) composite film implanted onto the current collector through a two-step electrochemical deposition method utilizing MnO2 as an intermediary template. The reduced graphene oxide (rGO) hydrogel film is first hydrothermally grown on a carbon cloth (CC) substrate to obtain a porous rGO@CC electrode on which MnO2 is electrodeposited. Then the as-prepared rGO/MnO2@CC electrode is subjected to the electrochemical polymerization of pyrrole, with MnO2 acting as an oxidizing template to facilitate the oxidative polymerization of pyrrole, ultimately yielding an rGO/PPy composite film on CC. The PPy synthesized via this methodology exhibits a distinctive interconnected structure, resulting in superior electrochemical performance compared with the electrode with PPy directly electrodeposited on rGO@CC. The optimized electrode achieves an impressive specific capacitance of 583.6 F g-1 at 1 A g-1 and retains 83% of its capacitance at 20 A g-1, with a capacitance loss of only 9.5% after 5000 charge-discharge cycles. The corresponding all-solid-state supercapacitor could provide a high energy density of 22.5 Wh kg-1 and a power density of 4.6 kW kg-1, with a capacitance retention of 82.7% after 5000 charge-discharge cycles. Furthermore, the device also demonstrates good flexibility performance upon bending at 90 and 180°. This work presents an innovative method for the preparation of carbon material/conducting polymer electrodes with specific structural characteristics and superior performance.

Pyridine appended pyrimidine bis hydrazone: Zn2+/ATP detection, bioimaging and functional properties of its dinuclear Zn(II) complex

A pyridine functionalized pyrimidine-based system, H2P was successfully synthesized, characterized, and evaluated for its remarkable selective characteristics towards Zn2+ and ATP ions. The chemical sensing capabilities of H2P were demonstrated through absorption, fluorescence, and NMR spectroscopic techniques. The probe exhibited outstanding sensitivity when interacting with the ions, demonstrating relatively strong association constants and impressively low detection limits. The comprehensive binding mechanism of H2P with respect to Zn2+ and ATP ions was investigated using a combination of analytical methods, including Job's plot, NMR spectroscopy, mass spectrometry, and density functional theory (DFT) experiments. The interesting sensing ability of H2P for Zn2+/ATP ions was harnessed for live cell bioimaging and other diverse on-site detection purposes, including paper strips, cotton swabs, and applications involving mung bean sprouts. Further, the fluorescent probe demonstrated its effectiveness in detecting Zn2+ and ATP within live cells, indicating its significant potential in the realm of biological imaging applications. Moreover, the molecular configuration of the zinc complex (H2P-Zn2Cl4), derived from H2P, was elucidated using X-ray crystallography. This complex exhibited intriguing multifunctional attributes, encompassing its capability for detecting picric acid and for reversible acid/base sensing responses. The enhanced conducting behavior of the complex as well as its resistance properties were investigated by performing I-V characteristics and electrochemical impedance spectroscopic (EIS) experiments respectively.

Alkaline-Responsive, Self-Healable, and Conductive Copolymer Composites with Enhanced Mechanical Properties Tailored for Wearable Tech

Despite significant advancements, current self-healing materials often suffer from a compromise between mechanical robustness and functional performance, particularly in terms of conductivity and responsiveness to environmental stimuli. Addressing this issue, the research introduces a self-healable and conductive copolymer, poly(ionic liquid-co-acrylic acid) (PIL-co-PAA), synthesized through free radical polymerization, and further optimized by incorporating thermoplastic polyurethane (TPU). This combination leverages the unique properties of each component, especially ion-dipole interactions and hydrogen bonds, resulting in a material that exhibits exceptional self-healing abilities and demonstrates enhanced mechanical properties and electrical conductivity. Moreover, the PIL-co-PAA/TPU films showcase alkaline-responsive behavior, a feature that broadens their applicability in dynamic environments. Through systematic characterization, including thermogravimetric analysis, tensile testing, and electrical properties measurements, the mechanisms behind the improved performance and functionality of these films are elucidated. The conductivities and ultimate tensile strength (σuts) of the PIL-co-PAA/TPU films regain 80% under 8 h healing process. To extend the applications for wearable devices, the self-healing properties of commercial cotton fabrics coated with the self-healable PIL-co-PAA are also investigated, demonstrating both self-healing and electrical properties. This study advances the understanding of self-healable conductive polymers and opens new avenues for their application in wearable technology.

Breast cancer detection based on cancer antigen 15-3; emphasis on optical and electrochemical methods: A review

Cancer antigen 15-3 (CA 15-3) is a crucial marker used in the diagnosis and monitoring of breast cancer (BC). The demand for early and precise cancer detection has grown, making the creation of biosensors that are highly sensitive and specific essential. This review paper provides a thorough examination of the progress made in optical and electrochemical biosensors for detecting the cancer biomarker CA 15-3. We focus on explaining their fundamental principles, sensitivity, specificity, and potential for point-of-care applications. The performance attributes of these biosensors are assessed by considering their limits of detection, reaction times, and operational stability, while also making comparisons to conventional methods of CA 15-3 detection. In addition, we explore the incorporation of nanomaterials and innovative transducer components to improve the performance of biosensors. This paper conducts a thorough examination of recent studies to identify the existing obstacles. It also suggests potential areas for future research in this fast progressing field.The paper provides insights into their advancement and utilization to enhance patient outcomes. Both categories of biosensors provide significant promise for the detection of CA 15-3 and offer distinct advantages compared to conventional analytical approaches.

Understanding the Behavior of Supercapacitor Materials via Electrochemical Impedance Spectroscopy: A Review

Energy harvesting and energy storage are two critical aspects of supporting the energy transition and sustainability. Many studies have been conducted to achieve excellent performance devices for these two purposes. As energy-storing devices, supercapacitors (SCs) have tremendous potential to be applied in several sectors. Some electrochemical characterizations define the performance of SCs. Electrochemical impedance spectroscopy (EIS) is one of the most powerful analyses to determine the performance of SCs. Some parameters obtained from this analysis include bulk resistance, charge-transfer resistance, total resistance, specific capacitance, response frequency, and response time. This work provides a holistic and comprehensive review of utilizing EIS for SC characterization. Overall, researchers can benefit from this review by gaining a comprehensive understanding of the utilization of electrochemical impedance spectroscopy (EIS) for characterizing supercapacitors (SCs), enabling them to enhance SC performance and contribute to the advancement of energy harvesting and storage technologies.

Proceeding of catalytic water splitting on Cu/Ce@g-C3N4 photocatalysts: an exceptional approach for sunlight-driven hydrogen generation

Increasing energy demands and environmental problems require carbon-free and renewable energy generation systems. For this purpose, we have synthesized efficient photocatalysts (i.e., g-C3N4, Cu@g-C3N4, Ce@g-C3N4 and Cu/Ce@g-C3N4) for H2 evolution from water splitting. Their optical, structural and electrochemical properties were investigated by UV-Vis-DRS, PL, XRD, FTIR, Raman and EIS methods. Their surface morphologies were evaluated by AFM and SEM analyses. Their chemical characteristics, compositions and stability were assessed using XPS, EDX and TGA techniques. Photoreactions were performed in a quartz reactor (150 mL/Velp-UK), whereas hydrogen generation activities were monitored using a GC-TCD (Shimadzu-2014/Japan). The results depicted that Cu/Ce@g-C3N4 catalysts are the most active catalysts that deliver 23.94 mmol g-1 h-1 of H2. The higher rate of H2 evolution was attributed to the active synergism between Ce and Cu metals and the impact of surface plasmon electrons (SPEs) of Cu that were produced during the photoreaction. The rate of H2 production was optimized by controlling various factors, including the catalyst amount, light intensity, pH, and temperature of the reaction mixture. It has been concluded that the current study holds promise to replace the conventional and costly catalysts used for hydrogen generation technologies.

Unraveling the anti-corrosion mechanisms of a novel hydrazone derivative on steel in contaminated concrete pore solutions: An integrated study

INTRODUCTION

Corrosion-induced deterioration of infrastructure is a growing global concern. The development and application of corrosion inhibitors are one of the most effective approaches to protect steel rebar from corrosion. Hence, this study focuses on a novel hydrazone derivative, (E)-N'-(4-(dimethylamino)benzylidene)-2-(5-methoxy-2-methyl-1H-indol-3-yl)aceto-hydrazide (HIND), and its potential application to mitigate corrosion in steel rebar exposed to chloride-contaminated concrete pore solutions (ClSCPS).

OBJECTIVES

The research aims to evaluate the anti-corrosion capabilities of HIND on steel rebar within a simulated corrosive environment, focusing on the mechanisms of its inhibitory effect.

METHODS

The corrosion of steel rebar exposed to the ClSCPS was studied through weight loss and electrochemical methods. The surface morphology of steel rebar surface was characterized by FE-SEM-EDS, AFM; oxidation states of the steel rebar and crystal structures were examined using X-ray photoelectron spectroscopy (XPS) and X-ray diffraction (XRD) methods. Further, experimental findings were complemented by theoretical studies using self-consistent-charge density-functional tight-binding (SCC-DFTB) simulations. The performance of HIND was monitored at an optimal concentration over a period of 30 days.

RESULTS

The results indicated a significant reduction in steel rebar corrosion upon introducing HIND. The inhibitor molecules adhered to the steel surface, preventing further deterioration and achieving an inhibition efficiency of 88.4% at 0.5 mmol/L concentration. The surface morphology analysis confirmed the positive effect of HIND on the rebar surface, showing a decrease in the surface roughness of the steel rebar from 183.5 in uninhibited to 50 nm in inhibited solutions. Furthermore, SCC-DFTB simulations revealed the presence of coordination between iron atoms and HIND active sites.

CONCLUSION

The findings demonstrate the potential of HIND as an effective anti-corrosion agent in chloride-contaminated environments. Its primary adsorption mechanism involves charge transfer from the inhibitor molecules to iron atoms. Therefore, applying HIND could be an effective strategy to address corrosion-related challenges in reinforced infrastructure.

A new cysteamine-copper chemically modified screen-printed gold electrode for glyphosate determination

A chemically modified screen-printed gold electrode has been prepared by covering the electrode surface with a cysteamine-copper self-assembled monolayer (SAM). The sensor was effective for the voltammetric sensing of glyphosate. The method exploits the interaction of glyphosate with copper ions complexed by cysteamine, which results in a decrease in the intensity of copper redox current. Cyclic voltammetry was employed as a measuring technique. When dealing with voltammograms with numerous peaks changing in shape and size, it is difficult to define which signal is the most significant for the analyte determination; in these cases, a helpful approach is chemometrics. In this work, PLS (Partial Least Square regression) has been applied to build models to correlate the signal with the glyphosate concentration in standard aqueous solutions and tap water samples (matrix-matched calibration). The method's figures of merits were evaluated, obtaining a limit of quantification of about 5 μM. The reliability of the proposed sensor was verified by analyzing tap water spiked with glyphosate; recoveries higher than 90 % were achieved.

Flexible solid-state Zn-air battery based on polymer-oxygen-functionalized g-C3N4 composite membrane

Personalized healthcare devices require an energy storage system that is flexible and has good mechanical strength and stability for long periods. Zn-air batteries show promise as an alternative to Li-air batteries for this purpose. Zn-air batteries with a high theoretical specific energy density of 1350 W h kg-1 have the potential to replace other metal-air batteries but faces the challenges, such as dendrite formation and Zn corrosion, hindering their successful commercialization. In this work, we report the design and performance optimization of a solid-state flexible Zn-air battery with superior performance and good mechanical property. In addition, we focused on the development of a gel-polymer composite membrane as the electrolyte. The main advantage of the flexible electrolyte is its optimum combination of good ionic conductivity and mechanical strength. Thus, we attempted to address the above-mentioned issues by modifying poly(vinyl alcohol) (PVA) with o-g-C3N4 through the in situ formation of a composite. The interaction between the functional groups of o-g-C3N4 and PVA increased the conductivity without compromising the mechanical behavior of the composite. According to the optimization of the composite composition, it was concluded that 0.32 wt% o-g-C3N4 in PVA showed the highest conductivity and excellent mechanical strength (increase from 25 MPa for pristine PVA membrane to 35 MPa for g-C3N4-PVA composite membrane). The performance of the solid-state battery was better (40 hours) than the standard PVA KOH (13 hours) membrane. Moreover, the stability of the battery was retained at various bending angles, demonstrating its potential to be used in flexible electronic devices.

Effect of annealing temperature on structural and electrochemical behaviour on MgFe2O4as electrode material in neutral aqueous electrolyte for supercapacitors

Binary metal oxides possess unique structures and multiple oxidation states, making them highly valuable in electrochemical analysis. This study aims to determine the effect of annealing temperature on the electrochemical properties of magnesium ferrite when used as an electrode material in a neutral aqueous electrolyte. We utilized the sol-gel technique to synthesize the material and annealed it at various temperatures. Our analysis of the material using different characterization techniques reveals significant changes in its structural and electrochemical properties. We found that the material exhibited a range of phases, and higher annealing temperatures led to improved electrochemical properties. The electrochemical measurements showed reversible and redox pseudo-capacitance behavior, with the material annealed at 500 °C exhibiting the highest specific capacitance of 117 F g-1at a current density of 0.5 A g-1. Capacitive and diffusion-controlled processes govern the total charge storage mechanism, and their contribution changes significantly as the annealing temperature varies. The capacitance retention of 500 °C annealed sample was 58% and it remained stable. This work establishes a correlation between annealing temperature on structural, morphological, and electrochemical behavior, thereby opening up avenues for tailoring them effectively. These findings can be useful in the development of future electrode materials for electrochemical applications.

Quasi-2D Bi0.775Ln0.225O1.5 (Ln = La, Pr, Nd, Sm, Eu): reversible iodine intercalation and their evaluation as the anode in the lithium-ion battery system

Layered materials with a robust structure and reversible intercalation behavior are highly sought-after in applications involving energy conversion and storage systems, energy converting devices, supercapacitors, batteries, superconductors, photonic materials, and catalysis involving hydrogen evolution reaction (HER), oxygen evolution reaction (OER), oxygen reduction reaction (ORR), solar cells and sensors. In the current study, quasi-2D rhombohedral Bi0.775Ln0.225O1.5 (Ln = La, Pr, Nd, Sm, and Eu) samples, synthesized by a solution combustion route, have been demonstrated to intercalate iodine reversibly. A solid-vapor reaction was employed to intercalate iodine at moderate temperatures, and deintercalation occurred on heating at higher temperatures. Expansion of the rhombohedral c-axis by ∼10 Å occurred, and the iodine between the interlayers existed as triiodide ions (I3-) in an unsymmetrical fashion. The amount of intercalated iodide has been determined from thermogravimetric analysis. Electron microscopic analysis confirmed these systems' intercalation and subsequent lattice expansion. In the diffuse reflectance spectra, charge transfer from the triiodide ions to the host oxide was noticed, and it caused the absorption edge to fall beyond the visible region for the intercalated samples. XPS analysis of iodine intercalated Bi0.775Pr0.225O1.5 has shown the mixed valence states for Pr and the existence of I3- along with some IO3- species. The quasi-2D structure was stable during the thermal deintercalation process. The evaluation of iodine intercalated Bi0.775Ln0.225O1.5 (Ln = La, Pr, Nd, Sm, and Eu) samples as anode material in the lithium-ion battery system has given quite promising results, exhibiting fast Li+-ion diffusion, low charge transfer resistance, good reversible capacity, capacity retention (after cycling back to 10 mA g-1), and structural stability (after long cycles).

Adsorptive stripping voltammetric determination of carbofuran in food using novel type of modified carbon-based electrode with grafted layers of nickel

A voltammetric determination of carbofuran (CBF) was developed using a novel type of carbon-containing electrode (CCE) modified with carbon ink (CI) and a chromatographic sorbent (CS) based of chromaton (Ch), polyethylene glycol and nickel acetylacetonate with grafted layers of nickel (NiCS, stands for Ni modified CS) further denoted as CI/NiCS/CCE. The surface morphology of this modified electrode was investigated by scanning electron microscopy (SEM) and by electrochemical impedance spectroscopy (EIS). CBF which is not electrochemically oxidizable was first hydrolyzed in alkaline medium to give anodically active phenolic analogue CBFP. The electrochemical reactions of CBFP at CI/NiCS/CCE were studied in phosphate buffer (PB) by cyclic voltammetry (CV) and linear sweep adsorptive stripping voltammetry (LSAdSV) using linear scan voltammetry in the first derivative mode (LSVFD). Linear concentration dependences in the concentration ranges from 0.1 to 10 μM and from 10 to 100 μM were obtained by the LSAdSV with limit of detection (LOD) and limit of quantification (LOQ) 0.06 and 0.19 μM, respectively. The novel modified CI/NiCS/CCE showed good stability and selectivity and was successfully used to determine CBF in real samples of vegetables and fruits with LOD 0.01 mg kg-1.

Nonconventional Symmetric Double-Side Electrochromic Devices Employing a Nafion Conductive Layer to Unlock Superior Durability

In this work, we present a methodology to create an effective novel double-sided symmetric architecture of solid-state electrochromic devices. This principally new nonconventional configuration provides access to novel electrochromic systems that could be applicable for the creation of smart double-side signage, smart boards, nonemissive displays, and other smart interactive devices that change their color upon application of a voltage. The proposed configuration is based on the assembly of two identical electrochromic materials facing each other through an opaque optical separator. As a proof of concept, we use an electrochromic material based on bis(4'-(pyridin-4-yl)-2,2':6',2″-terpyridine) iron complex, covalently immobilized on screen-printed surface-extended ITO support. The symmetric configuration allows for a drastic enhancement of the overall stability of the device due to both attenuation of the counter electrode polarization and minimization of electrolyte decomposition. A nontransparent ion-permeable separator, in turn, allows observing the color change of only one of the electrodes by cutting off the optical contribution of the electrode located behind it. Further functionalization of the electrochromic material with a thin layer of Nafion is a beneficial strategy to significantly boost up long-term durability of the devices. Applying a layer of Nafion to the electrochromic material results in an increase in ionic conductivity within the device and ensures better retention of electrochromic molecules on the surface, thus minimizing device decomposition during long-term electrochemical cycling. An electrochromic device that bears Nafion-functionalized electrodes can operate (i) in the dual-side mode, where both sides demonstrate effective electrochromic performance; or (ii) in a one-side manner, where only one side of the device changes color. Notably, when operating in the one-side mode, the device withstands 70,000 cycles, after which the performance of the device can be resumed by simply turning the device to the other side (via switching the polarity of the electrodes).

Electro-Oxidation Reaction of Methanol over La2-xSrxNi1-y(Mn/Fe/Co)yO4+δ Ruddlesden-Popper Oxides

Solution combustion-synthesized Ruddlesden-Popper oxides La1.4Sr0.6Ni0.9(Mn/Fe/Co)0.1O4+δ were explored for the methanol electro-oxidation reaction. With optimal doping of Sr2+ in the A site and Co2+ in the B site, Ni3+ with t2g6 d x 2 - y 2 1 configuration in La1.4Sr0.6Ni0.9Co0.1O4+δ exhibited a tetragonal distortion with compression in axial bonds and elongation in equatorial bonds. This structural modification fostered an augmented overlap of d z 2 orbitals with axial O 2p orbitals, leading to a heightened density of states at the Fermi level. Consequently, this facilitated not only elevated electrical conductivity but also a noteworthy reduction in the charge transfer resistance. These effects collectively contributed to the exceptional methanol oxidation activity of La1.4Sr0.6Ni0.9Co0.1O4+δ, as evidenced by an impressive current density of 21.4 mA cm-2 and retention of 95% of initial current density even after 10 h of prolonged reaction. The presence of Ni3+ further played a pivotal role in the creation of NiOOH, a crucial intermediate species, facilitated by the presence of surface oxygen vacancies. These factors synergistically enabled efficient methanol oxidation. In summary, our present study not only yields substantial insights but also paves the way for a novel avenue to fine-tune the activity of Ruddlesden-Popper oxides for the successful electro-oxidation of methanol.

Recyclable Conjugated Polyelectrolyte Hydrogels for Pseudocapacitor Fabrication

In alignment with widespread interest in carbon neutralization and sustainable practices, we disclose that conjugated polyelectrolyte (CPE) hydrogels are a type of recyclable, electrochemically stable, and environmentally friendly pseudocapacitive material for energy storage applications. By leveraging ionic-electronic coupling in a relatively fluid medium, one finds that hydrogels prepared using a fresh batch of an anionic CPE, namely, Pris-CPE-K, exhibit a specific capacitance of 32.6 ± 6.6 F g-1 in 2 M NaCl and are capable of 80% (26.1 ± 6.5 F g-1) capacitance retention after 100,000 galvanostatic charge-discharge (GCD) cycles at a current density (J) of 10 A g-1. We note that equilibration under a constant potential prior to GCD analysis leads to the K+ counterions in the CPE exchanging with Na+ and, thus, the relevant active material Pris-CPE-Na. It is possible to remove the CPE material from the electrochemical cell via extraction with water and to carry out a simple purification through dialysis to produce a recycled material, namely Re-CPE-Na. The recycling workup has no significant detrimental impact on the electrochemical performance. Specifically, Re-CPE-Na hydrogels display an initial specific capacitance of 26.3 ± 1.2 F g-1 (at 10 A g-1) and retain 77% of the capacitance after a subsequent 100,000 GCD cycles. Characterization by NMR, FTIR, and Raman spectroscopies, together with XPS and GPC measurements, revealed no change in the structure of the backbone or side chains. However, rheological measurements gave evidence of a slight loss in G' and G''. Overall, that CPE hydrogels display recyclability argues in favor of considering them as a novel materials platform for energy storage applications within an economically viable circular recycling strategy.

Mechanistic Insights into Anion-Induced Electrochromism of Ru(II)-Based Metallo-Supramolecular Polymer

The metallo-supramolecular polymer (MSP) is considered one of the most promising electrodes for electrochromic devices due to its intrinsically stable redox properties. Nevertheless, despite extensive work focusing on improving the electrochromic and electrochemical properties of MSPs, little experimental evidence exists from in-depth investigations on the anion-induced electrochromism of MSPs. Herein, Ru-based metallo-supramolecular polymer (polyRu) films with excellent electrochromic performance were fabricated through a novel electrochemical deposition method, and the electrochromic mechanism was further understood. The polyRu films possess fast reaction kinetics with a short switching time of 4.0 s (colored) and 2.8 s (bleached) and highly reversible redox properties due to the resulting impacts on the capacitive behaviors (containing surface, near-surface and intercalation pseudo-capacitance) of the perchlorate ions in the electrochromic process. Moreover, the electrochromic degradation of the polyRu films is considered to stem from the numerous nanopores in the film induced by ClO4- transport and the exchange of counter anions from Cl- to ClO4-. In addition, a physical model, revealing the transport of conduction ions and the evolution of the structure and properties of the polyRu film during the electrochromic process, is presented. It is observed that the charge balance of Ru3+ and Ru2+, achieved through the adsorption/desorption of ClO4- on the film, provides electrochromic and electrochemical reversibility to the polyRu film under positive/negative bias. Correspondingly, a transformation from polyRu·(Cl-)2n to polyRu·(ClO4-)x(Cl-)2n-x in the polyRu film is induced by a counter anion exchange from Cl- to ClO4-. Revealing the detailed perchlorate ion transfer kinetics and electrochromic mechanism in this film can offer new insights into the application of metallo-supramolecular polymers in electrochromic devices.

Optimum iron-pyrophosphate electronic coupling to improve electrochemical water splitting and charge storage

Tuning the electronic properties of transition metals using pyrophosphate (P2O7) ligand moieties can be a promising approach to improving the electrochemical performance of water electrolyzers and supercapacitors, although such a material's configuration is rarely exposed. Herein, we grow NiP2O7, CoP2O7, and FeP2O7 nanoparticles on conductive Ni-foam using a hydrothermal procedure. The results indicated that, among all the prepared samples, FeP2O7 exhibited outstanding oxygen evolution reaction and hydrogen evolution reaction with the least overpotential of 220 and 241 mV to draw a current density of 10 mA/cm2. Theoretical studies indicate that the optimal electronic coupling of the Fe site with pyrophosphate enhances the overall electronic properties of FeP2O7, thereby enhancing its electrochemical performance in water splitting. Further investigation of these materials found that NiP2O7 had the highest specific capacitance and remarkable cycle stability due to its high crystallinity as compared to FeP2O7, having a higher percentage composition of Ni on the Ni-foam, which allows more Ni to convert into its oxidation states and come back to its original oxidation state during supercapacitor testing. This work shows how to use pyrophosphate moieties to fabricate non-noble metal-based electrode materials to achieve good performance in electrocatalytic splitting water and supercapacitors.

Impedimetric sensing platform for sensitive carbendazim detection using MOCVD-synthesized copper graphene

Nanostructures of graphene were synthesized for electrochemical carbendazim (CBZ) fungicide detection via metal-organic chemical vapor deposition (MOCVD). The arduous process of graphene transfer is eliminated by this innovative approach to MOCVD graphene development. It also generates several defects and impurities and ultimately leads to the uniform deposition of graphene on SiO2/Si. SEM, EDX, and ICP-AES were used to assess the morphological properties and chemical composition of the materials. To obtain in-depth knowledge of the entire system, the electrochemical behavior was also investigated using voltammetric techniques and electrochemical impedance spectroscopy. The interaction of particles of copper with CBZ and the enhanced surface area of graphene, which causes a strong oxidation current, has been demonstrated to achieve the ideal CBZ sensing behavior. The electrode responded linearly at CBZ concentration levels of 1 to 50 nM, and the sensitivity of the sensing materials was estimated to be 0.0337 Ω nM-1. The statistical analysis validates the electrode's exceptional selectivity and remarkable reproducibility in determining CBZ.

Bifunctional quaternary magnetic composite as efficient heterojunctions photocatalyst for simultaneous photocatalytic visible light degradation of dye and herbicide pollutants from water and bacterial disinfection

In the present study, the magnetic Fe3O4/Ag2C2O4/Ag3PO4/Ag nanocomposite were prepared through a simple co-precipitation method by using calendula officinalis seed extract as a stabilizer. The fabricated quaternary photocatalyst was applied for to degrade food dye Brilliant Blue FCF (BB) and herbicide Paraquat (PQ) as contaminants at binary mixture in a batch and continuous flow-loop photoreactor under visible light irradiation and also the antibacterial properties was investigated. The fabricated nanocomposite was determined by XRD, FESEM, EDX, BET&BJH, UV-DRS, FT-IR and VSM methods to gain insight about structure, morphology, purity, surface area, optical, functional group and magnetic properties. The photoelectrochemical experiments, PL and DRS indicate the successful coupling of the active semiconductors. The degradation efficiency of BB and PQ was announced to be 88.9% and 92.72% under optimal conditions with a high reaction rate constant value (0.03 and 0.0326 min-1), respectively. The quaternary photocatalyst exhibited superior photocatalytic performance compared with Ag3PO4/Ag2C2O4 and Ag2C2O4. Various scavengers were used to explore the mechanism of photocatalytic performance and supports that [Formula: see text] and OH. is main active species in the degradation process of BB and PQ, respectively. Furthermore, the Fe3O4/Ag2C2O4/Ag3PO4/Ag also demonstrated bactericidal activity against Staphylococcus aureus (S. aureus) as gram-positive bacteria and Escherichia coli (E. coli) as gram-negative bacteria.

Aminosilanized Interface Promotes Electrochemically Stable Carbon Nitride Films with Fewer Trap States on FTO for (Photo)electrochemical Systems

We have demonstrated the direct growth of a CNx layer on a plasma-cleaned and aminosilanized F-doped SnO2 (FTO) electrode to study the CNx|FTO interface that is critical for (photo)electrocatalytic systems. The (3-aminopropyl)triethoxysilane (APTES) was chosen as a bifunctional organosilane, with the amino end incorporating into CNx and the silane end connecting to the hydroxylated FTO surface. Plasma cleaning and aminosilanization resulted in a highly hydrophilic surface, which leads to better contact of melted thiourea to the aminosilanized FTO (p-FTONH2) during CNx polymer condensation, thus generating a thinner and more compact CNx layer. The modification at the interface was shown to influence the CNx growth on length scales of tens of micrometers. We grew CNx thin films on p-FTONH2 (CNx/p-FTONH2) and nonaminosilanized p-FTO (CNx/p-FTO). CNx/p-FTONH2 had a smaller density of trap states and passed 2.4 times the charges before failure compared to CNx/p-FTO. Additionally, a 40% decrease in interfacial charge transfer resistance at the CNx|electrolyte interface was measured for CNx/p-FTONH2 compared to CNx/p-FTO under -0.5 V vs RHE in 0.1 M Na2SO4. Furthermore, with the CNx surface coated with a Pt cocatalyst, Pt/CNx/p-FTONH2 exhibited faster hydrogen evolution rates and larger current densities than Pt/CNx/p-FTO. The highest Faraday efficiency toward electrochemical hydrogen evolution (FEH2) in 0.1 M Na2SO4 (pH = 7) was 46.1%, 37.3%, 57.7%, and 70.5% for Pt/CNx/p-FTONH2, Pt/CNx/p-FTO, CNx/p-FTONH2, and CNx/p-FTO, respectively. The increase in hydrogen evolution rate did not follow the magnitude of the current density change, indicating electrochemical processes other than proton reduction. Overall, we have carefully investigated the CNx|FTO interface and suggested potential solutions to make CNx films better (photo)electrodes for (photo)electrochemical systems.

Molybdenum disulfide (MoS2) along with graphene nanoplatelets (GNPs) utilized to enhance the capacitance of conducting polymers (PANI and PPy)

Hybrid composites of molybdenum disulfide (MoS2), graphene nanoplatelets (GNPs) and polyaniline (PANI)/polypyrrole (PPy) have been synthesized as cost-effective electrode materials for supercapacitors. We have produced MoS2 from molybdenum dithiocarbamate by a melt method in an inert environment and then used a liquid exfoliation method to form its composite with graphene nanoplatelets (GNPs) and polymers (PANI and PPy). The MoS2 melt/GNP ratio in the resultant composites was 1 : 3 and the polymer was 10% by wt. of the original composite. XRD (X-ray diffraction analysis) confirmed the formation of MoS2 and SEM (scanning electron microscopy) revealed the morphology of the synthesized materials. The electrochemical charge storage performance of the synthesized composite materials was assessed by cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS) and galvanostatic charge/discharge (GCCD) measurements. Resultant composites showed enhanced electrochemical performances (specific capacitance = 236.23 F g-1, energy density = 64.31 W h kg-1 and power density = 3858.42 W kg-1 for MoS2 melt 5 mPP at a current density of 0.57 A g-1 and had 91.87% capacitance retention after 10 000 charge-discharge cycles) as compared to the produced MoS2; thus, they can be utilized as electrode materials for supercapacitors.

Continuous monitoring of multiple biomarkers with an ultrasensitive 3D-structured wearable biosensor

Chronic diseases call for routine management of frequent monitoring of specific biomarkers. Traditional in vitro diagnostics technologies suffer from complex sampling processes and long detection intervals, which cannot meet the need of continuous monitoring. Wearable devices taking advantage of compact size, rapid detection process, and small sample consumption are promising to take the place of endpoint detection, providing more comprehensive information about human health. Here, we proposed a fully integrated wearable system with an ultrasensitive 3D-structured biosensor for real-time monitoring of multiple metabolites. The 3D-structured biosensor shows wide linear ranges of 400-1,400 μM and 0.1-8 mM and high sensitivities of 460.5 and 283.09 μA/(mM·cm2) for lactate and glucose detection, respectively. We have conducted in vivo animal experiments, and the proposed wearable biosensor demonstrated high consistency with established methods. We envision that this system could provide a real-time wearable detection platform for multiple biomarker detection.

Design of an electrochemical aptasensor in the presence of an array of gold nanostructure and a GO-MWCNTs nanocomposite: application in diagnosis of Alzheimer's disease

Alzheimer's disease (AD) is considered one of the main progressive chronic diseases in elderly individuals. Early diagnosis using related biomarkers, specifically beta-amyloid peptide (Aβ), allows finding expected treatment routes. Here, we developed an electrochemical aptasensing platform for AD by employing a glassy carbon electrode (GCE) modified with a layer of jagged gold (JG) nanostructure (diameter: 60-185 nm) and graphene oxide-carboxylic acid functionalized multiwalled carbon nanotubes (GO-c-MWCNTs) nanocomposite. These surface modifications acted as the signal amplifier and provided an optimum nano-interface substrate for immobilizing aptamer strands. The measurements of Aβ were performed via differential pulse voltammetry (DPV), and the aptasensor detected the analyte in a linear range from 0.1 pg mL-1 to 1 ng mL-1, with an estimated limit of detection (LOD) of about 0.088 pg mL-1 (S/N = 3). The aptasensor showed sufficient stability (11 days), reversibility (three times), and reproducibility (five times re-fabrication with relative standard deviation (RSD): 1.27). The potential interfering agents showed negligible impact on the sensing performance. Finally, the application of the aptasensor was evaluated in the presence of 10 serum samples, and the recovery values were from 93 to 110.1%.

Porous 3D columnar-sphere of NiO nanomaterials synthesized for supercapacitors via hydrothermal route: impact of thiourea concentration

The charge storage application has witnessed a dramatic increase in terms of the short charge-discharge time of supercapacitors, specifically in highly active electrode materials. For charge storage supercapacitor applications, highly porous materials are preferable. In this research article, thiourea acts as a leaving agent in the preparation of the porous 3D spherical architecture of NiO nanomaterials. The influence of the molar concentration of thiourea on structural, morphological, and electrochemical charge storage applications has been studied. X-ray diffraction reveals a cubic structure with Fm3̄m space group for the NiO nanomaterials. The scanning electron microscopy (SEM) images show the porous 3D columnar spherical structure, and FTIR has been used for the optical analysis of the NiO materials. The 1D-3D columnar-spherical structure of the NiO flakes exhibits a high electrochemical charge storage pseudocapacitive nature. The optimized 0.40 M thiourea-NiO (Th-NiO) nanomaterial is highly hydrophilic, exhibiting a maximum specific capacity of 171.1 mA h g-1 at 5 mV s-1 by CV and 148.5 mA h g-1 at 0.2 mA cm-2 by GCD. The highest power, energy densities are 0.96 kW kg-1 and 6.66 W h kg-1 with the highest charge-discharge cycle rating of 92% up to 5000 cycles of the asymmetric NiO//rGO hybrid supercapacitor device.

Development of electrochemical Zn2+ sensors for rapid voltammetric detection of glucose-stimulated insulin release from pancreatic β-cells

Diabetes is a chronic disease characterized by elevated blood glucose levels resulting from absent or ineffective insulin release from pancreatic β-cells. β-cell function is routinely assessed in vitro using static or dynamic glucose-stimulated insulin secretion (GSIS) assays followed by insulin quantification via time-consuming, costly enzyme-linked immunosorbent assays (ELISA). In this study, we developed a highly sensitive electrochemical sensor for zinc (Zn2+), an ion co-released with insulin, as a rapid and low-cost method for measuring dynamic insulin release. Different modifications to glassy carbon electrodes (GCE) were evaluated to develop a sensor that detects physiological Zn2+ concentrations while operating within a biological Krebs Ringer Buffer (KRB) medium (pH 7.2). Electrodeposition of bismuth and indium improved Zn2+ sensitivity and limit of detection (LOD), and a Nafion coating improved selectivity. Using anodic stripping voltammetry (ASV) with a pre-concentration time of 6 min, we achieved a LOD of 2.3 μg/L over the wide linear range of 2.5-500 μg/L Zn2+. Sensor performance improved with 10-min pre-concentration, resulting in increased sensitivity, lower LOD (0.18 μg/L), and a bilinear response over the range of 0.25-10 μg/L Zn2+. We further characterized the physicochemical properties of the Zn2+ sensor using scanning electron microscopy (SEM), cyclic voltammetry (CV), and electrochemical impedance spectroscopy (EIS). Finally, we demonstrated the sensor's capability to measure Zn2+ release from glucose-stimulated INS-1 β-cells and primary mouse islets. Our results exhibited a high correlation with secreted insulin and validated the sensor's potential as a rapid alternative to conventional two-step GSIS plus ELISA methods.

Electrochemical and electrical characteristics of ball milled Cs2Ti6O13 modified by the surface-to-bulk migration of hydroxyl groups

Ball milling of solids under benign conditions leads to surface functionalization without altering the crystal structure and morphology. However, these additional surface functional groups are rarely fixed but instead mobilized across such ball milled solids. This phenomenon, including its effects on electrochemical and electrical properties, has received limited attention. We report herein that dry vibratory ball milling of lepidocrocite-type Cs2Ti6O13 generated hydroxyl groups which subsequently migrated from surfaces to bulk. The increased number of bulk hydroxyl groups is deduced from Raman, IR, and solid state 1H nuclear magnetic resonance spectroscopy, and thermogravimetric analysis. In contrast, the decrease in the relative proportion of surface hydroxyl groups/water and carbon-oxygen species was deduced from X-ray photoelectron spectroscopy. The inaccessible hydroxyl groups in ball milled Cs2Ti6O13 lead to a smaller amount of stored charge and increased charge transfer resistance, according to galvanostatic charge-discharge experiments and electrochemical impedance spectroscopy studies in 1 M Na2SO4. The alternating current electrical properties were also measured, revealing fundamental insights such as the one-dimensional conduction pathway and the relaxation time in microseconds. A model has been proposed for this surface-to-bulk migration of the hydroxyl groups, which competes with surface dangling bonds leading to particle agglomeration.

Oil palm leaf-derived hierarchical porous carbon for "water-in-salt" based supercapacitors: the effect of anions (Cl- and TFSI-) in superconcentrated conditions

This study investigates the use of a hierarchical porous carbon electrode derived from oil palm leaves in a "water-in-salt" supercapacitor. The impact of anion identity on the electrical performance of the carbon electrode was also explored. The results show that the prepared carbon had a hierarchical porous structure with a high surface area of up to 1840 m2 g-1. When a 20 m LiTFSI electrolyte was used, the carbon electrode had a specific capacitance of 176 F g-1 with a wider potential window of about 2.6 V, whereas the use of a cheaper 20 m LiCl electrolyte showed a higher specific capacitance of 331 F g-1 due to the smaller size of the Cl- anion, which enabled inner capacitance. Therefore, the anion identity has an effect on the electrochemical performance of porous carbon, and this research contributes to the understanding of using "water-in-salt" electrolytes in carbon-based supercapacitors. The study's findings provide insights into developing low-cost, high-performance supercapacitors that can operate in a wider voltage range.

Nickel Oxide Decorated Halloysite Nanotubes as Sulfur Host Materials for Lithium-Sulfur Batteries

Lithium-sulfur batteries with high energy density still confront many challenges, such as polysulfide dissolution, the large volume change of sulfur, and fast capacity fading in long-term cycling. Herein, a naturally abundant clay material, halloysite, is introduced as a sulfur host material in the cathode of Li-S batteries. Nickel oxide nanoparticles are embedded into the halloysite nanotubes (NiO@Halloysite) by hydrothermal and calcination treatment to improve the affinity of halloysite nanotubes to polysulfides. The NiO@Halloysite composite loaded with sulfur (S/NiO@Halloysite) is employed as the cathode of Li-S batteries, which combines the physical confinements of tubular halloysite particles and good chemical adsorption ability of NiO. The S/NiO@Halloysite electrode exhibits a high discharge capacity of 1205.47 mAh g^-1 at 0.1 C. In addition, it demonstrates enhanced cycling stability, retaining ≈60% of initial capacity after 450 cycles at 0.5 C. The synthesized NiO@Halloysite can provide a promising prospect and valuable insight into applying natural clay materials in Li-S batteries.

Large-scale sonochemical fabrication of a Co3O4-CoFe2O4@MWCNT bifunctional electrocatalyst for enhanced OER/HER performances

Herein, we have prepared a mixed-phase Co₃O₄-CoFe₂O₄@MWCNT nanocomposite through a cheap, large-scale, and facile ultrasonication route followed by annealing. The structural, morphological, and functional group analyses of the synthesized catalysts were performed by employing various characterization approaches such as X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and scanning electron microscopy (SEM). The resultant samples were tested for bifunctional electrocatalytic activity through various electrochemical techniques: cyclic voltammetry (CV), linear sweep voltammetry (LSV), and electrochemical impedance spectroscopy (EIS). The prepared Co₃O₄-CoFe₂O₄@MWCNT nanocomposite achieved a very high current density of 100 mA cm^-2 at a lower (290 mV and 342 mV) overpotential (vs. RHE) and a smaller (166 mV dec^-1 and 138 mV dec^-1) Tafel slope in the oxygen evolution reaction (OER) and hydrogen evolution reaction (HER), respectively, compared to Co₃O₄-CoFe₂O₄. The excellent electrochemical activity of the as-prepared electrocatalyst was attributed to the uniform incorporation of Co₃O₄-CoFe₂O₄ over MWCNTs which provides high redox active sites, a greater surface area, better conductivity, and faster charge mobility. Furthermore, the enhanced electrochemical active surface, low charge-transfer resistance (R_ct), and higher exchange current density (J₀) of the Co₃O₄-CoFe₂O₄@MWCNT ternary composite are attributed to its superior behavior as a bifunctional electrocatalyst. Conclusively, this study demonstrates a novel and large-scale synthesis approach for bifunctional electrocatalysts with a high aspect ratio and abundance of active sites for high-potential energy applications.

4-Cyanophenol herbicide sensor using multi-walled carbon nanotube embedded dual-microporous polypyrrole nanoparticles as metal-free and environmentally friendly hybrid electrode

A highly sensitive 4-cyanophenol (4-CP) sensor was fabricated using multi-walled carbon nanotube (MWCNT)-embedded dual-microporous polypyrrole nanoparticle-modified screen-printed carbon electrodes (SPCE/DMPPy/MWCNT). The well-defined dual pores of DMPPy and MWCNT (~ 0.53 and ~ 0.65 nm) acted as good analyte absorption agents (shortening the ion diffusion path) and conducting agents (reducing the internal electron-transfer resistance). This enhanced electrical conductivity resulted in the improved electro-oxidation of 4-CP. A higher sensitivity (19.0 μA μM^-1 cm^-2) and lower limit of detection (0.8 nM) were achieved with a wide detection range of 0.001-400 µM (R² = 0.9988). The proposed sensor exhibited excellent recovery of 4-CP in real-world samples. Therefore, the SPCE/DMPPy/MWCNT sensor is regarded highly suitable for rapidly detecting 4-CP.

Evaluation of Cellulose–MXene Composite Hydrogel Based Bio-Resistive Random Access Memory Material as Mimics for Biological Synapses

We report a memory device based on organic-inorganic hybrid cellulose-Ti₃C₂T_X MXene composite hydrogel (CMCH) as a switching layer sandwiched between Ag top and FTO bottom electrodes. The device (Ag/CMCH/FTO) was fabricated by a simple, solution-processed route and exhibits reliable and reproducible bipolar resistive switching. Multilevel switching behavior was observed at low operating voltages (±0.5 to ±1 V). Furthermore, the capacitive-coupled memristive characteristics of the device were corroborated with electrochemical impedance spectroscopy and this affirmed the filamentary conduction switching mechanism (LRS-HRS). The synaptic functions of the CMCH-based memory device were evaluated, wherein potentiation/depression properties over 8 × 10³ electric pulses were observed. The device also exhibited spike time-dependent plasticity-based symmetric Hebbian learning rule of a biological synapse. This hybrid hydrogel is expected to be a potential switching material for low-cost, sustainable, and biocompatible memory storage devices and artificial synaptic applications.

Alkali-Doped Nanopaper Membranes Applied as a Gate Dielectric in FETs and Logic Gates with an Enhanced Dynamic Response

The market for flexible, hybrid, and printed electronic systems, which can appear in everything from sensors and wearables to displays and lighting, is still uncertain. What is clear is that these systems are appearing every day, enabling devices and systems that can, in the near future, be crumpled up and tucked in our pockets. Within this context, cellulose-based modified nanopapers were developed to serve both as a physical support and a gate dielectric layer in field-effect transistors (FETs) that are fully recyclable. It was found that the impregnation of those nanopapers with sodium (Na⁺) ions allows for low operating voltage FETs (<3 V), with mobility above 10 cm² V^-1 s^-1, current modulation surpassing 10⁵, and an improved dynamic response. Thus, it was possible to implement those transistors into simple circuits such as inverters, reaching a clear discrimination between logic states. Besides the overall improvement in electrical performance, these devices have shown to be an interesting alternative for reliable, sustainable, and flexible electronics, maintaining proper operation even under stress conditions.

Electrochemical Cloud Point Temperature from Thermoamperometry: Real-Time Analysis for Phase Transition of Thermoresponsive Polymers

Cloud point temperature (T_cp) is a thermal index used to define the phase transition of thermoresponsive polymers. In this study, we used electrochemical techniques to obtain an electrochemical cloud point temperature (T_ecp) that exhibits the more accurate phase transition temperature and can replace T_cp. Thermoamperometry on an ultramicroelectrode was conducted with a poly(arylene ether sulfone) (PES₁₀) as a model system to obtain a current-temperature (i-T) curve in real time; the T_ecp of the PES₁₀ was determined from the i-T curve. The i-T curve shows an unprecedented current decrease in the PES₁₀ solution despite increasing temperature; on the other hand, the current increased linearly with increasing temperature in the solution without PES₁₀. This phenomenon was analyzed by considering the characteristics of PES₁₀ during phase transition, such as dynamic viscosity, temperature of the solution, and electrode impedance. It was confirmed that the current drops shown in the i-T curves were mainly due to the decrease of real electrode area. The comparison of T_ecp and T_cp showed that both depended similarly on the concentrations of the thermoresponsive polymer and the supporting electrolyte. The results reveal that by adjusting the concentration of polymer and electrolyte in an organic solution, T_ecp, as a new analytical method, can be used in electric circuit-based energy storage appliances such as Li-ion batteries and supercapacitors.

In situ synthesis of polythiophene encapsulated 2D hexagonal boron nitride nanocomposite based electrochemical transducer for detection of 5-fluorouracil with high selectivity

It is difficult for the scientific community to develop a nonenzymatic sensing platform for extremely sensitive and selective detection of specific biomolecules, antibiotics, food adulterants, heavy metals, etc. One of the most significant chemotherapy drugs, 5-fluorouracil (5-Fu), which is used to treat solid malignancies, has a fluorine atom in the fifth position of the uracil molecule. Recognizing the secure and effective dosing of drugs for chemotherapy continues to be a critical concern in cancer disease management. The maintenance of the optimal 5-Fu concentration is dependent on the presence of 5-Fu in biofluids. Herein we reported a conducting polymer encapsulated 2D material, PTh/h-BN for the efficient electrochemical detection of anticancer drug 5-Fu. Furthermore, the synthesized PTh/h-BN nanocomposite was confirmed by the High-Resolution Transmission Electron Microscope (HR-TEM), High-Resolution Scanning Electron Microscope (HR-SEM), X-ray diffraction (XRD), and Fourier-Transform Infrared Spectroscopy (FT-IR). The electrical resistance of PTh/h-BN modified GCE and its sensing performance towards 5-Fu were tested using Electrochemical Impedance Spectroscopy (EIS) and Cyclic Voltammetry (CV) studies respectively. The analytical performance of our proposed catalyst was tested using Differential Pulse Voltammetry (DPV), and the amperometry (i-t curve) method. From the results, our proposed PTh/h-BN nanocomposite-modified GCE shows enhanced sensing performance due to higher redox peak currents, large active surface area, and high electrical conductivity. Moreover, the nanohybrid shows enhanced sensing performances with quick response time, wide linear range, the lowest limit of detection, high sensitivity, and high selectivity in the presence of various interferents. Finally, the practical applicability of the proposed sensor was tested with real-world samples with very good recovery percentages.

Surface Immobilization of a Re(I) Tricarbonyl Phenanthroline Complex to Si(111) through Sonochemical Hydrosilylation

A sonochemical-based hydrosilylation method was employed to covalently attach a rhenium tricarbonyl phenanthroline complex to silicon(111). fac-Re(5-(p-Styrene)-phen)(CO)₃Cl (5-(p-styrene)-phen = 5-(4-vinylphenyl)-1,10-phenanthroline) was reacted with hydrogen-terminated silicon(111) in an ultrasonic bath to generate a hybrid photoelectrode. Subsequent reaction with 1-hexene enabled functionalization of remaining atop Si sites. Attenuated total reflectance-Fourier transform infrared spectroscopy confirms attachment of the organometallic complex to silicon without degradation of the organometallic core, supporting hydrosilylation as a strategy for installing coordination complexes that retain their molecular integrity. Detection of Re(I) and nitrogen by X-ray photoelectron spectroscopy (XPS) further support immobilization of fac-Re(5-(p-styrene)-phen)(CO)₃Cl. Cyclic voltammetry and electrochemical impedance spectroscopy under white light illumination indicate that fac-Re(5-(p-styrene)-phen)(CO)₃Cl undergoes two electron reductions. Mott-Schottky analysis indicates that the flat band potential is 239 mV more positive for p-Si(111) co-functionalized with both fac-Re(5-(p-styrene)-phen)(CO)₃Cl and 1-hexene than when functionalized with 1-hexene alone. XPS, ultraviolet photoelectron spectroscopy, and Mott-Schottky analysis show that functionalization with fac-Re(5-(p-styrene)-phen)(CO)₃Cl and 1-hexene introduces a negative interfacial dipole, facilitating reductive photoelectrochemistry.

Engineering graphene-based electrodes for optical neural stimulation

Graphene-based materials (GBMs) have been investigated in recent years with the aim of developing flexible interfaces to address a range of neurological disorders, where electrical stimulation may improve brain function and tissue regeneration. The recent discovery that GBM electrodes can generate an electrical response upon light exposure has inspired the development of non-genetic approaches capable of selectively modulating brain cells without genetic manipulation (i.e., optogenetics). Here, we propose the conjugation of graphene with upconversion nanoparticles (UCNPs), which enable wireless transcranial activation using tissue-penetrating near-infrared (NIR) radiation. Following a design of experiments approach, we first investigated the influence of different host matrices and dopants commonly used to synthesize UCNPs in the electrical response of graphene. Two UCNP formulations achieving optimal enhancement of electrical conductivity upon NIR activation at λ = 780 or 980 nm were identified. These formulations were then covalently attached to graphene nanoplatelets following selective hydroxyl derivatization. The resulting nanocomposites were evaluated in vitro using SH-SY5Y human neuroblastoma cells. NIR activation at λ = 980 nm promoted cell proliferation and downregulated neuronal and glial differentiation markers, suggesting the potential application of GBMs in minimally invasive stimulation of cells for tissue regeneration.

Superior Long-Term Corrosion Inhibition of N80 Steel by New Eco-friendly Hydrazone-Based Compounds in a Simulated Oil Well Acidizing Environment: Establishing the Mechanism at the Molecular Level

The acid treatment process of production wells is one of the most acid-induced corrosive processes. Corrosion inhibitors are an effective tool to inhibit the acids employed in acidizing treatments. Herein, new eco-friendly hydrazone-based compounds, namely, 2-(4-isobutylphenyl)-N-((1E,2E)-3-phenylallylidene) propanehydrazide (IPP) and N'-cyclohexylidene-2-[4-(2-methylpropyl)phenyl] propanehydrazide (CIP), were prepared through the functionalization of ibuprofen (IBF) and applied for corrosion mitigation of N80 steel in 15 wt % HCl (referred to hereafter as blank). The anticorrosion performance of selected compounds was investigated by employing weight loss (WL), potentiodynamic polarization curves (PPCs), and electrochemical impedance spectroscopy (EIS), complemented by scanning electron microscopy (SEM) and atomic force microscopy (AFM) analyses. In addition, density functional theory-based tight-binding (DFTB) modeling was conducted to get molecular-level insights into inhibitor-metal bonding. Experimental results revealed excellent long-term corrosion inhibition efficiency at very low concentrations of inhibitors and a mixed-type inhibition process. Numerically, N80 steel polarization resistance increased from 5.51 Ω cm² in blank to 608.4 and 396 Ω cm² in blank inhibited with 5 × 10^-3 mol/L of IPP and CIP, respectively, equivalent to 99% and 98% inhibition efficiency based on EIS experiments. Besides, SEM and AFM images showed that, after addition to 15 wt % HCl, inhibitors could effectively prevent the acid attack on the N80 steel surface. The fitting of experimental data to adsorption isotherms indicated that inhibitors' adsorption followed the Langmuir isotherm model and mixed physicochemical adsorption on the metal surface. The DFTB simulation revealed that inhibitor molecules can create covalent and physical interactions with iron atoms, which is further confirmed by partial density of states (PDOSs) analysis.

An ultra-sensitive electrochemical biosensor using the Spike protein for capturing antibodies against SARS-CoV-2 in point-of-care

This work presents an innovative ultra-sensitive biosensor having the Spike protein on carbon-based screen-printed electrodes (SPEs), for monitoring in point-of-care antibodies against SARS-CoV-2, a very important tool for epidemiological monitoring of COVID-19 infection and establishing vaccination schemes. In an innovative and simple approach, a highly conductive support is combined with the direct adsorption of Spike protein to enable an extensive antibody capture. The high conductivity was ensured by using carboxylated carbon nanotubes on the carbon electrode, by means of a simple and quick approach, which also increased the surface area. These were then modified with EDC/NHS chemistry to produce an amine layer and undergo Spike protein adsorption, to generate a stable layer capable of capturing the antibodies against SARS-CoV-2 in serum with great sensitivity. Electrochemical impedance spectroscopy was used to evaluate the analytical performance of this biosensor in serum. It displayed a linear response between 1.0 ​pg/mL and 10 ​ng/mL, with a detection limit of ∼0.7 ​pg/mL. The analysis of human positive sera containing antibody in a wide range of concentrations yielded accurate data, correlating well with the reference method. It also offered the unique ability of discriminating antibody concentrations in sera below 2.3 ​μg/mL, the lowest value detected by the commercial method. In addition, a proof-of-concept study was performed by labelling anti-IgG antibodies with quantum dots to explore a new electrochemical readout based on the signal generated upon binding to the anti-S protein antibodies recognised on the surface of the biosensor. Overall, the alternative serologic assay presented is a promising tool for assessing protective immunity to SARS-CoV-2 and a potential guide for revaccination.

•

An ultra-sensitive biosensor for detection of low levels of antibodies against SARS-CoV-2.

•

Highly conductive substrate with adsorbed protein S and point-of-care capability.

•

Application to human sera samples and good correlation with commercial method.

•

Electrochemical impedance readings with an iron-based redox probe.

•

Alternative electrochemical impedance readings with anti-IgG labelled with quantum dots.

Conformal atomic layer deposition of RuOxon highly porous current collectors for micro-supercapacitor applications

3D porous electrodes have been considered as a new paradigm shift for increasing the energy storage of pseudocapacitive micro-supercapacitors for on-chip electronics. However, the conformal deposition of active materials is still challenging when highly porous structures are involved. In this work, we have investigated the atomic layer deposition (ALD) of ruthenium dioxide RuO₂on porous Au and Pt architectures prepared by hydrogen bubble templated electrodeposition, with area enlargement factors ranging from 400 to 10 000 cm²/cm². Using proper ALD conditions, a uniform RuO₂coverage has been successfully obtained on porous Au, with a specific electrode capacitance of 8.1 mF cm^-2and a specific power of 160 mW cm^-2for a minute amount of active material. This study also shows the importance of the chemical composition and reactivity of the porous substrate for achieving conformal deposition of a ruthenium oxide layer.