Grain engineering for improved charge carrier transport in two-dimensional lead-free perovskite field-effect transistors

Unveiling the role of linear alkyl organic cations in 2D layered tin halide perovskite field-effect transistors

Two-dimensional (2D) tin halide perovskites are promising semiconductors for field-effect transistors (FETs) owing to their fascinating electronic properties. However, the correlation between the chemical nature of organic cations and charge carrier transport is still far from understanding. In this study, the influence of chain length of linear alkyl ammonium cations on film morphology, crystallinity, and charge transport in 2D tin halide perovskites is investigated. The carbon chain lengths of the organic spacers vary from propylammonium to heptanammonium. The increase of alkyl chain length leads to enhanced local charge carrier transport in the perovskite film with mobilities of up to 8 cm2 V-1 s-1, as confirmed by optical-pump terahertz spectroscopy. A similar improved macroscopic charge transport is also observed in FETs, only to the chain length of HA, due to the synergistic enhancement of film morphology and molecular organization. While the mobility increases with the temperature rise from 100 K to 200 K due to the thermally activated transport mechanism, the device performance decreases in the temperature range of 200 K to 295 K because of ion migration. These results provide guidelines on rational design principles of organic spacer cations for 2D tin halide perovskites and contribute to other optoelectronic applications.

Unlocking the Potential of Tin-Based Perovskites: Properties, Progress, and Applications in New-Era Electronics

Electronics have greatly promoted the development of modern society and the exploration of new semiconducting materials with low cost and high mobility continues to attract interest in the advance of next-generation electronic devices. Among emerging semiconductors, the metal-halide perovskite, especially the nontoxic tin (Sn)-based candidates, has recently made breakthroughs in the field of diverse electronic devices due to its excellent charge transport properties and cost-effective large-area deposition capability at low temperatures. To enable a more comprehensive understanding of this emerging research field and promote the development of new-generation perovskite electronics, this review aims to provide an in-depth understanding with the discussion of unique physical properties of Sn-based perovskites and the summarization of recent research progress of Sn-based perovskite field-effect transistors (FETs) and diverse electronic devices. The unique character of negligible ion migration is also discussed, which is fundamentally different from the lead-based counterparts and provides a great prerequisite for device application. The following section highlights the potential broad applications of Sn-perovskite FETs as a competitive and feasible technology. Finally, an outlook and remaining challenges are given to advance the progression of Sn-based perovskite FETs, especially on the origin and solution of stability problems toward high-performance Sn-based perovskite electronics.

Photoinduced Nonvolatile Memory Transistor Based on Lead-Free Perovskite Incorporating Fused π-Conjugated Organic Ligands

Perovskites field-effect transistors (PeFETs) have been intensively investigated for their application in detector and synapse. However, synapse based on PeFETs is still very difficult to integrate excellent charge carrier transporting ability, photosensitivity, and nonvolatile memory effects into one device, which is very important for developing bionic electronic devices and edge computing. Here, two-dimensional (2D) perovskites are synthesized by incorporating fused π-conjugated pyrene-O-ethyl-ammonium (POE) ligands and a systematic study is conducted to obtain enhanced performance and reliable PeFETs. The optimized (POE)2 SnI4 transistors display the hole mobility over 0.3 cm2  V-1  s-1 , high repeatability, and operational stability. Meanwhile, the derived photo memory devices show remarkable photoresponse, with a switching ratio higher than 105 , high visible light responsivity (>4 × 104  A W-1 ), and stable storage-erase cycles, as well as competitive retention performance (104  s). The photoinduced memory behavior can be benefiting from the insulating nature of quantum-well in 2D perovskite under dark and its excellent light sensitivity. The excellent photo memory behaviors have been maintained after 40 days in a N2 atmosphere. Finally, a 2D perovskite-only transistors with a multi-level memory behavior (16 distinct states) is described by controlling incident light pulse. This work provides broader attention toward 2D perovskite and optoelectronic application.

Enhancing Gating Performance in Organic Molecular Field-Effect Transistors by Introducing Polar Azulene Components

Organic molecular field-effect transistors (FETs) are promising building components for future electronic circuits. Efficient control of charge transport properties is one key issue in the design of organic molecular FETs. In this study, we propose a redesign of a naphthalene-based FET by introducing two azulene components in opposite dipole moment directions. Using density functional theory combined with non-equilibrium Green's function, the simulated electronic transport characteristics reveal that the introduction of polar azulene components effectively narrows the frontier molecular orbitals gap, leading to an increase in the ON-state current. Meanwhile, the OFF-state current is significantly suppressed by highly localizing the dominant electronic transport channel. As a result, improved gate controllability is achieved with a higher ON-OFF current ratio, which is nearly seven times higher than that of the naphthalene-based FET device. These findings provide theoretical directions for future design of organic molecular FET devices with enhanced gating regulation efficiency.

Ambient-Stable 2D Dion-Jacobson Phase Tin Halide Perovskite Field-Effect Transistors with Mobility over 1.6 Cm2 V-1 s-1

Solution-processed metal halide perovskites hold immense potential for the advancement of next-generation field-effect transistors (FETs). However, the instability of perovskite-based transistors has impeded their progress and practical applications. Here, ambient-stable high-performance FETs based on 2D Dion-Jacobson phase tin halide perovskite BDASnI4 , which has high film quality and excellent electrical properties, are reported. The perovskite channels are established by engineering the film crystallization process via the employment of ammonium salt interlayers and the incorporation of NH4 SCN additives within the precursor solution. The refined FETs demonstrate field-effect hole mobilities up to 1.61 cm2 V-1 s-1 and an on/off ratio surpassing 106 . Moreover, the devices show impressive operational and environmental stability and retain their functional performance even after being exposed to ambient conditions with a temperature of 45 °C and humidity of 45% for over 150 h.

Modulating the Schottky barriers of metal-2D perovskite junctions through molecular engineering of spacer ligands

The crucial role of spacer ligands in affecting the contact properties of metal-2D perovskite junctions, which can severely affect device performance, is revealed in this work. We studied the contact properties of Ag, Au, and Pt with 2D perovskites that possess ligands with different sizes and functional groups. It is found that the interface binding energy, Schottky barrier height (SBH), and tunneling property depend strongly on the ligand size and functional group type. Small-size ligands can induce effective interface coupling and result in perturbed perovskite electronic properties and a high tunneling probability. In addition, high work-function metals and more electronegative functional groups can induce more severe band shifts at the interface. The features of diverse ligands ensure a widely tunable SBH ranging from 0-1.07 eV. This study provides guidance for developing more effective 2D perovskite-based electric nanodevices by tuning the contact properties through molecular engineering of spacer ligands.

Modification of Two-Dimensional Tin-Based Perovskites by Pentanoic Acid for Improved Performance of Field-Effect Transistors

Understanding and controlling the nucleation and crystallization in solution-processed perovskite thin films are critical to achieving high in-plane charge carrier transport in field-effect transistors (FETs). This work demonstrates a simple and effective additive engineering strategy using pentanoic acid (PA). Here, PA is introduced to both modulate the crystallization process and improve the charge carrier transport in 2D 2-thiopheneethylammonium tin iodide ((TEA)₂ SnI₄ ) perovskite FETs. It is revealed that the carboxylic group of PA is strongly coordinated to the spacer cation TEAI and [SnI₆ ]^4- framework in the perovskite precursor solution, inducing heterogeneous nucleation and lowering undesired oxidation of Sn²⁺ during the film formation. These factors contribute to a reduced defect density and improved film morphology, including lower surface roughness and larger grain size, resulting in overall enhanced transistor performance. The reduced defect density and decreased ion migration lead to a higher p-channel charge carrier mobility of 0.7 cm² V^-1 s^-1 , which is more than a threefold increase compared with the control device. Temperature-dependent charge transport studies demonstrate a mobility of 2.3 cm² V^-1 s^-1 at 100 K due to the diminished ion mobility at low temperatures. This result illustrates that the additive strategy bears great potential to realize high-performance Sn-based perovskite FETs.

Recent progress in layered metal halide perovskites for solar cells, photodetectors, and field-effect transistors

Metal halide perovskite materials demonstrate immense potential for photovoltaic and electronic applications. In particular, two-dimensional (2D) layered metal halide perovskites have advantages over their 3D counterparts in optoelectronic applications due to their outstanding stability, structural flexibility with a tunable bandgap, and electronic confinement effect. This review article first analyzes the crystallography of different 2D perovskite phases [the Ruddlesden-Popper (RP) phase, the Dion-Jacobson (DJ) phase, and the alternating cations in the interlayer space (ACI) phase] at the molecular level and compares their common electronic properties, such as out-of-plane conductivity, crucial to vertical devices. This paper then critically reviews the recent development of optoelectronic devices, namely solar cells, photodetectors and field effect transistors, based on layered 2D perovskite materials and points out their limitations and potential compared to their 3D counterparts. It also identifies the important application-specific future research directions for different optoelectronic devices providing a comprehensive view guiding new research directions in this field.

Low-Operating-Voltage Two-Dimensional Tin Perovskite Field-Effect Transistors with Multilayer Gate Dielectrics Based on a Fluorinated Copolymer

The fabrication of organic-inorganic perovskite field-effect transistors (FETs) with polymer gate dielectrics is challenging because of the solvent corrosion and wettability issues at interfaces. A few polymers have been integrated into perovskite transistors; however, these devices have high operating voltages due to low dielectric constants. Herein, poly(vinylidenefluoride-co-trifluoroethylene) (PVDF-TrFE) with a high dielectric constant is introduced into bottom-gate phenylethylammonium tin iodide perovskite [(PEA)₂SnI₄] FETs. Polytetrafluoroethylene (PTFE) and cross-linked poly(4-vinylphenol) (PVP) (CL-PVP) are used to address the issues of solvent corrosion and wettability. We design the PVDF-TrFE/PTFE and PVDF-TrFE/PTFE/CL-PVP dielectric layers, where the ferroelectric properties of PVDF-TrFE are reduced by PTFE. The (PEA)₂SnI₄ FETs operate at relatively low gate voltages, exhibiting good overall performance with average hole mobilities of 0.42 and 0.36 cm² V^-1 s^-1. Our findings provide a feasible strategy for constructing low-operating-voltage perovskite FETs with large-dielectric-constant ferroelectric polymers as gate dielectrics by a solution processing technique.