The Ba813 chromosomal DNA sequence effectively traces the whole Bacillus anthracis community

Rapid Identification of Bacillus anthracis In Silico and On-Site Using Novel Single-Nucleotide Polymorphisms

Bacillus anthracis is a spore-forming bacterium that causes life-threatening infections in animals and humans and has been used as a bioterror agent. Rapid and reliable detection and identification of B. anthracis are of primary interest for both medical and biological threat-surveillance purposes. Few chromosomal sequences provide enough polymorphisms to clearly distinguish B. anthracis from closely related species. We analyzed 18 loci of the chromosome of B. anthracis and discovered eight novel single-nucleotide polymorphism (SNP) sites that can be used for the specific identification of B. anthracis. Using these SNP sites, we developed software-named AGILE V1.1 (anthracis genome-based identification with high-fidelity E-probe)-for easy, user-friendly identification of B. anthracis from whole-genome sequences. We also developed a recombinase polymerase amplification-Cas12a-based method that uses nucleic acid extracts for the specific, rapid, in-the-field identification of B. anthracis based on these SNPs. Via this method and B. anthracis-specific CRISPR RNAs for the target CR5_2, CR5_1, and Ba813 SNPs, we clearly detected 5 aM genomic DNA. This study provides two simple and reliable methods suitable for use in local hospitals and public health programs for the detection of B. anthracis. IMPORTANCE Bacillus anthracis is the etiologic agent of anthrax, a fatal disease and a potential biothreat. A specific, accurate, and rapid method is urgently required for the identification of B. anthracis. We demonstrate the potential of using eight novel SNPs for the rapid and accurate detection of B. anthracis via in silico and laboratory-based testing methods. Our findings have important implications for public health responses to disease outbreaks and bioterrorism threats.

A CRISPR/Cas12a-based DNAzyme visualization system for rapid, non-electrically dependent detection of Bacillus anthracis

As next-generation pathogen detection methods, CRISPR-Cas-based detection methods can perform single-nucleotide polymorphism (SNP) level detection with high sensitivity and good specificity. They do not require any particular equipment, which opens up new possibilities for the accurate detection and identification of Bacillus anthracis. In this study, we developed a complete detection system for B. anthracis based on Cas12a. We used two chromosomally located SNP targets and two plasmid targets to identify B. anthracis with high accuracy. The CR5 target is completely new. The entire detection process can be completed within 90 min without electrical power and with single-copy level sensitivity. We also developed an unaided-eye visualization system based on G4-DNAzyme for use with our CRISPR-Cas12a detection system. This visualization system has good prospects for deployment in field-based point-of-care detection. We used the antisense nucleic acid CatG4R as the detection probe, which showed stronger resistance to interference from components of the solution. CatG4R can also be designed as an RNA molecule for adaptation to Cas13a detection, thereby broadening the scope of the detection system.

Ba813 harboring Bacillus cereus, genetically closely related to Bacillus anthracis, causing nosocomial bloodstream infection: Bacterial virulence factors and clinical outcome

Bacillus cereus commonly causes catheter-related bloodstream infections (BSIs) in hospital settings, and occasionally occurs fatal central nervous system (CNS) complications. B. cereus harboring Ba813, a specific chromosomal marker of Bacillus anthracis, has been found in patients with severe infection and nosocomial BSI. However, the bacteriological profile and clinical feature of Ba813 (+) B. cereus are unclear. Fifty-three patients with B. cereus BSI were examined. Isolates were evaluated for Ba813, B. anthracis-related and food poisoning-related virulence, multilocus sequencing typing, and biofilm formation. Patients’ clinical records were reviewed retrospectively. The 53 isolates were comprised of 29 different sequence types in two distinct clades. Seventeen of the 53 (32%) B. cereus isolates including five sequence types possessed Ba813 and were classified into Clade-1/Cereus-III lineage which is most closely related to Anthracis lineage. No B. cereus possessed B. anthracis-related virulence genes. Ba813 (+) strains showed a lower prevalence of enterotoxin genes than Clade-2 strains (n = 4), but no difference from Clade-1. Ba813 (+) strains showed significantly lower biofilm formation than Clade-1/non-Cereus-III (n = 22) and Clade-2 strains, respectively. Compared to Clade-1/non-Cereus-III and Clade-2 B. cereus, Ba813 (+) strains were isolated more frequently from elderly patients, patients with indwelling central venous catheter rather than peripheral venous catheter, and patients who remained in the hospital for longer before BSI onset. No significant differences in disease severity or mortality were observed. Though two of the ten Ba813 (-) strains in Clade-1/Cereus III were isolated from the patients with CNS complication, no significant difference was observed in the bacterial profile and clinical characteristics among Clade-1/Cereus III strains. In conclusion, our report suggested that Ba813-harboring B. cereus strains, genetically closely related to B. anthracis, were abundant among B. cereus strains in the hospital setting, and might cause catheter-related nosocomial BSI. However, it did not affect the clinical outcomes.

Detection and Identification of Bacillus anthracis: From Conventional to Molecular Microbiology Methods

Rapid and reliable identification of Bacillus anthracis is of great importance, especially in the event of suspected deliberate release of anthrax spores. However, the identification of B. anthracis is challenging due to its high similarity to closely related species. Since Amerithrax in 2001, a lot of effort has been made to develop rapid methods for detection and identification of this microorganism with special focus on easy-to-perform rapid tests for first-line responders. This article presents an overview of the evolution of B. anthracis identification methods from the time of the first description of the microorganism until the present day.

Novel Sequence Type in Bacillus cereus Strains Associated with Nosocomial Infections and Bacteremia, Japan

This sequence type was dominant in isolates from bacteremia patients in 3 hospitals.

Bacillus cereus is associated with foodborne illnesses characterized by vomiting and diarrhea. Although some B. cereus strains that cause severe extraintestinal infections and nosocomial infections are recognized as serious public health threats in healthcare settings, the genetic backgrounds of B. cereus strains causing such infections remain unknown. By conducting pulsed-field gel electrophoresis and multilocus sequence typing, we found that a novel sequence type (ST), newly registered as ST1420, was the dominant ST isolated from the cases of nosocomial infections that occurred in 3 locations in Japan in 2006, 2013, and 2016. Phylogenetic analysis showed that ST1420 strains belonged to the Cereus III lineage, which is much closer to the Anthracis lineage than to other Cereus lineages. Our results suggest that ST1420 is a prevalent ST in B. cereus strains that have caused recent nosocomial infections in Japan.

Pathogenicity, population genetics and dissemination of Bacillus anthracis

Bacillus anthracis, the etiological agent of anthrax, procures its particular virulence by a capsule and two AB type toxins: the lethal factor LF and the edema factor EF. These toxins primarily disable immune cells. Both toxins are translocated to the host cell by the adhesin-internalin subunit called protective antigen PA. PA enables LF to reach intra-luminal vesicles, where it remains active for long periods. Subsequently, LF translocates to non-infected cells, leading to inefficient late therapy of anthrax. B. anthracis undergoes slow evolution because it alternates between vegetative and long spore phases. Full genome sequence analysis of a large number of worldwide strains resulted in a robust evolutionary reconstruction of this bacterium, showing that B. anthracis is split in three main clades: A, B and C. Clade A efficiently disseminated worldwide underpinned by human activities including heavy intercontinental trade of goat and sheep hair. Subclade A.Br.WNA, which is widespread in the Northern American continent, is estimated to have split from clade A reaching the Northern American continent in the late Pleistocene epoch via the former Bering Land Bridge and further spread from Northwest southwards. An alternative hypothesis is that subclade A.Br.WNA. evolved from clade A.Br.TEA tracing it back to strains from Northern France that were assumingly dispatched by European explorers that settled along the St. Lawrence River. Clade B established mostly in Europe along the alpine axis where it evolved in association with local cattle breeds and hence displays specific geographic subclusters. Sequencing technologies are also used for forensic applications to trace unintended or criminal acts of release of B. anthracis. Under natural conditions, B. anthracis generally affects domesticated and wild ruminants in arid ecosystems. The more recently discovered B. cereus biovar anthracis spreads in tropical forests, where it threatens particularly endangered primate populations.

DNA Persistence in a Sink Drain Environment

Biofilms are organized structures composed mainly of cells and extracellular polymeric substances produced by the constituent microorganisms. Ubiquitous in nature, biofilms have an innate ability to capture and retain passing material and may therefore act as natural collectors of contaminants or signatures of upstream activities. To determine the persistence and detectability of DNA passing through a sink drain environment, Bacillus anthracis strain Ames35 was cultured (6.35 x 10⁷ CFU/mL), sterilized, and disposed of by addition to a sink drain apparatus with an established biofilm. The sink drain apparatus was sampled before and for several days after the addition of the sterilized B. anthracis culture to detect the presence of B. anthracis DNA. Multiple PCR primer pairs were used to screen for chromosomal and plasmid DNA with primers targeting shorter sequences showing greater amplification efficiency and success. PCR amplification and detection of target sequences indicate persistence of chromosomal DNA and plasmid DNA in the biofilm for 5 or more and 14 or more days, respectively.

Multiplex PCR for species-level identification of Bacillus anthracis and detection of pXO1, pXO2, and related plasmids

The Bacillus anthracis virulence plasmids pXO1 and pXO2 have critical implications for biosafety and select agent status. The proper identification and characterization of B. anthracis and its plasmid profile is important to the biodefense research community. Multiplex PCR was used to simultaneously detect a B. anthracis-specific chromosomal mutation, 4 targets distributed across pXO1, 3 targets distributed across pXO2, and highly conserved regions of the 16S gene, allowing an internal positive control for each sample. The multiplex PCR can produce as many as 9 easily separable and distinguishable amplicons, ranging in size from 188 to 555 bp. The PCR results were used to characterize DNA samples extracted from B. anthracis, other Bacillus species, and other bacterial species from many different genera. With the exception of 2 novel putative plasmids discovered, testing against inclusion and extensive exclusion panels showed 100% correlation to previously published and expected results. Upon testing 29 previously unpublished B. anthracis strains, 10 (34.5%) were pXO1(+)/pXO2(+), 9 (31.0%) were pXO1(+)/pXO2(-), 7 (24.1%) were pXO1(-)/pXO2(+), and 3 (10.3%) were pXO1(-)/pXO2(-). The present work presents a novel 9-target multiplex PCR assay capable of species-level identification of B. anthracis via a unique chromosomal marker and the detection of pXO1 and pXO2 via multiply redundant targets on each.

A novel multiplex PCR discriminates Bacillus anthracis and its genetically related strains from other Bacillus cereus group species

Anthrax is an important zoonotic disease worldwide that is caused by Bacillus anthracis, a spore-forming pathogenic bacterium. A rapid and sensitive method to detect B. anthracis is important for anthrax risk management and control in animal cases to address public health issues. However, it has recently become difficult to identify B. anthracis by using previously reported molecular-based methods because of the emergence of B. cereus, which causes severe extra-intestinal infection, as well as the human pathogenic B. thuringiensis, both of which are genetically related to B. anthracis. The close genetic relation of chromosomal backgrounds has led to complexity of molecular-based diagnosis. In this study, we established a B. anthracis multiplex PCR that can screen for the presence of B. anthracis virulent plasmids and differentiate B. anthracis and its genetically related strains from other B. cereus group species. Six sets of primers targeting a chromosome of B. anthracis and B. anthracis-like strains, two virulent plasmids, pXO1 and pXO2, a bacterial gene, 16S rRNA gene, and a mammalian gene, actin-beta gene, were designed. The multiplex PCR detected approximately 3.0 CFU of B. anthracis DNA per PCR reaction and was sensitive to B. anthracis. The internal control primers also detected all bacterial and mammalian DNAs examined, indicating the practical applicability of this assay as it enables monitoring of appropriate amplification. The assay was also applied for detection of clinical strains genetically related to B. anthracis, which were B. cereus strains isolated from outbreaks of hospital infections in Japan, and field strains isolated in Zambia, and the assay differentiated B. anthracis and its genetically related strains from other B. cereus group strains. Taken together, the results indicate that the newly developed multiplex PCR is a sensitive and practical method for detecting B. anthracis.

Identification and validation of specific markers of Bacillus anthracis spores by proteomics and genomics approaches

Bacillus anthracis is the causative bacteria of anthrax, an acute and often fatal disease in humans. The infectious agent, the spore, represents a real bioterrorism threat and its specific identification is crucial. However, because of the high genomic relatedness within the Bacillus cereus group, it is still a real challenge to identify B. anthracis spores confidently. Mass spectrometry-based tools represent a powerful approach to the efficient discovery and identification of such protein markers. Here we undertook comparative proteomics analyses of Bacillus anthracis, cereus and thuringiensis spores to identify proteoforms unique to B. anthracis. The marker discovery pipeline developed combined peptide- and protein-centric approaches using liquid chromatography coupled to tandem mass spectrometry experiments using a high resolution/high mass accuracy LTQ-Orbitrap instrument. By combining these data with those from complementary bioinformatics approaches, we were able to highlight a dozen novel proteins consistently observed across all the investigated B. anthracis spores while being absent in B. cereus/thuringiensis spores. To further demonstrate the relevance of these markers and their strict specificity to B. anthracis, the number of strains studied was extended to 55, by including closely related strains such as B. thuringiensis 9727, and above all the B. cereus biovar anthracis CI, CA strains that possess pXO1- and pXO2-like plasmids. Under these conditions, the combination of proteomics and genomics approaches confirms the pertinence of 11 markers. Genes encoding these 11 markers are located on the chromosome, which provides additional targets complementary to the commonly used plasmid-encoded markers. Last but not least, we also report the development of a targeted liquid chromatography coupled to tandem mass spectrometry method involving the selection reaction monitoring mode for the monitoring of the 4 most suitable protein markers. Within a proof-of-concept study, we demonstrate the value of this approach for the further high throughput and specific detection of B. anthracis spores within complex samples.

In silico and in vitro evaluation of PCR-based assays for the detection of Bacillus anthracis chromosomal signature sequences

Bacillus anthracis, the causative agent of anthrax, is a zoonotic pathogen that is relatively common throughout the world and may cause life threatening diseases in animals and humans. There are many PCR-based assays in use for the detection of B. anthracis. While most of the developed assays rely on unique markers present on virulence plasmids pXO1 and pXO2, relatively few assays incorporate chromosomal DNA markers due to the close relatedness of B. anthracis to the B. cereus group strains. For the detection of chromosomal DNA, different genes have been used, such as BA813, rpoB, gyrA, plcR, S-layer, and prophage-lambda. Following a review of the literature, an in silico analysis of all signature sequences reported for identification of B. anthracis was conducted. Published primer and probe sequences were compared for specificity against 134 available Bacillus spp. genomes. Although many of the chromosomal targets evaluated are claimed to be specific to B. anthracis, cross-reactions with closely related B. cereus and B. thuringiensis strains were often observed. Of the 35 investigated PCR assays, only 4 were 100% specific for the B. anthracis chromosome. An interlaboratory ring trial among five European laboratories was then performed to evaluate six assays, including the WHO recommended procedures, using a collection of 90 Bacillus strains. Three assays performed adequately, yielding no false positive or negative results. All three assays target chromosomal markers located within the lambdaBa03 prophage region (PL3, BA5345, and BA5357). Detection limit was further assessed for one of these highly specific assays.

Identification of a Bacillus anthracis specific indel in the yeaC gene and development of a rapid pyrosequencing assay for distinguishing B. anthracis from the B. cereus group

Bacillus anthracis, the causative agent of anthrax, is a potential source of bioterrorism. The existing assays for its identification lack specificity due to the close genetic relationship it exhibits to other members of the B. cereus group. Our comparative analyses of protein sequences from Bacillus species have identified a 24 amino acid deletion in a conserved region of the YeaC protein that is uniquely present in B. anthracis. PCR primers based on conserved regions flanking this indel in the Bacillus cereus group of species (viz. Bacillus cereus, B. anthracis, B. thuringiensis, B. mycoides, B. weihenstephnensis and B. pseudomycoides) specifically amplified a 282 bp fragment from all six reference B. anthracis strains, whereas a 354 bp fragment was amplified from 15 other B. cereus group of species/strains. These fragments, due to large size difference, are readily distinguished by means of agarose gel electrophoresis. In contrast to the B. cereus group, no PCR amplification was observed with any of the non-B. cereus group of species/strains. This indel was also used for developing a rapid pyrosequencing assay for the identification of B. anthracis. Its performance was evaluated by examining the presence or absence of this indel in a panel of 81 B. cereus-like isolates from various sources that included 39 B. anthracis strains. Based upon the sequence data from the pyrograms, the yeaC indel was found to be a distinctive characteristic of various B. anthracis strains tested and not found in any other species/strains from these samples. Therefore, this B. anthracis specific indel provides a robust and highly-specific chromosomal marker for the identification of this high-risk pathogen from other members of the B. cereus group independent of a strain's virulence. The pyrosequencing platform also allows for the rapid and simultaneous screening of multiple samples for the presence of this B. anthracis-specific marker.

Development of real-time PCR assays for detection and quantification of Bacillus cereus group species: differentiation of B. weihenstephanensis and rhizoid B. pseudomycoides isolates from milk

Quantitative real-time PCR (qRT-PCR) offers an alternative method for the detection of bacterial contamination in food. This method provides the quantitation and determination of the number of gene copies. In our study, we established an RT-PCR assay using the LightCycler system to detect and quantify the Bacillus cereus group species, which includes B. cereus, B. anthracis, B. thuringiensis, B. weihenstephanensis, B. mycoides, and B. pseudomycoides. A TaqMan assay was designed to detect a 285-bp fragment of the motB gene encoding the flagellar motor protein, which was specific for the detection of the B. cereus group species, excluding B. pseudomycoides, and the detection of a 217-bp gene fragment of a hypothetical protein specific only for B. pseudomycoides strains. Based on three hydrolysis probes (MotB-FAM-1, MotB-FAM-2, and Bpm-FAM-1), it was possible to differentiate B. weihenstephanensis from the B. cereus group species with nonrhizoid growth and B. pseudomycoides from the whole B. cereus group. The specificity of the assay was confirmed with 119 strains belonging to the Bacillus cereus group species and was performed against 27 other Bacillus and non-Bacillus bacteria. A detection limit was determined for each assay. The assays performed well not only with purified DNA but also with DNA extracted from milk samples artificially contaminated with bacteria that belong to the B. cereus group species. This technique represents an alternative approach to traditional culture methods for the differentiation of B. cereus group species and differentiates B. weihenstephanensis and B. pseudomycoides in one reaction.

A multiplex real-time PCR for identifying and differentiating B. anthracis virulent types

Bacillus anthracis is closely related to the endospore forming bacteria Bacillus cereus and Bacillus thuringiensis. For accurate detection of the life threatening pathogen B. anthracis, it is essential to distinguish between these three species. Here we present a novel multiplex real-time PCR for simultaneous specific identification of B. anthracis and discrimination of different B. anthracis virulence types. Specific B. anthracis markers were selected by whole genome comparison and different sets of primers and probes with optimal characteristic for multiplex detection of the B. anthracis chromosome, the B. anthracis pXO1 and pXO2 plasmids and an internal control (IC) were designed. The primer sets were evaluated using a panel of B. anthracis strains and exclusivity was tested using genetically closely related B. cereus strains. The robustness of final primer design was evaluated by laboratories in three different countries using five different real-time PCR thermocyclers. Testing of a panel of more than 20 anthrax strains originating from different locations around the globe, including the recent Swedish anthrax outbreak strain, showed that all strains were detected correctly.

Development of a PCR assay for identification of the Bacillus cereus group species

AIMS

A PCR technique was developed as a reliable and rapid identification method for the Bacillus cereus group species, based on a unique conserved sequence of the motB gene (encoding flagellar motor protein) from B. cereus, Bacillus thuringiensis and Bacillus anthracis.

METHODS AND RESULTS

Primer locations were identified against eight strains of the B. cereus group spp. from nucleotide sequences available in the National Centre for Biotechnology Information database. The PCR assay was applied for the identification of 117 strains of the B. cereus group spp. and 19 strains from other microbial species, with special emphasis on foodborne pathogens.

CONCLUSION

The designed cross-species primers are group specific and did not react with DNA from other Bacillus and non-Bacillus species either motile or not. The primers system enabled us to detect 10(3) CFU of B. cereus cells per millilitre of sample.

SIGNIFICANCE AND IMPACT OF THE STUDY

Bacillus cereus group spp. belongs to one of the most prevalent foodborne pathogens. Bacterial growth results in production of different toxins; therefore, consumption of food containing >10(6) bacteria per gram may result in emetic and diarrhoeal syndromes. A rapid and sensitive bacterial detection method is significant for food safety.

Conjugative transfer of insecticidal plasmid pHT73 from Bacillus thuringiensis to B. anthracis and compatibility of this plasmid with pXO1 and pXO2

Bacillus anthracis, the etiologic agent of anthrax, is genetically close to and commonly shares a giant gene pool with B. cereus and B. thuringiensis. In view of the human pathogenicity and the long persistence in the environment of B. anthracis, there is growing concern about the effects of genetic exchange with B. anthracis on public health. In this work, we demonstrate that an insecticidal plasmid, pHT73, from B. thuringiensis strain KT0 could be efficiently transferred into two attenuated B. anthracis strains, Ba63002R (pXO1(+) pXO2(-)) and Ba63605R (pXO1(-) pXO2(+)), by conjugation in liquid medium in the laboratory, with transfer rates of 2.3 x 10(-4) and 1.6 x 10(-4) CFU/donor, respectively. The B. anthracis transconjugants containing both pHT73 and pXO1 or pXO2 could produce crystal protein Cry1Ac encoded by plasmid pHT73 and had high toxicity to Helicoverpa armigera larvae. Furthermore, the compatibility and stability of pHT73 with pXO1/pXO2 were demonstrated. The data are informative for further investigation of the safety of B. thuringiensis and closely related strains in food and in the environment.

Three related cases of cutaneous anthrax in France: clinical and laboratory aspects

Anthrax is an acute bacterial infection caused by Bacillus anthracis. The infection is cutaneous in about 95% of human cases and respiratory in about 5%. Approximately 2000 cases of cutaneous anthrax are reported annually worldwide. This disease became exceptional in Europe thanks to strict veterinarian monitoring. The last human cases of anthrax indicated in France were in 1997. We report 3 new related cases of naturally acquired cutaneous anthrax that occurred in France in 2008. The unique features of these cases include the atypical clinical presentation and the contribution of the rapid and specific diagnosis techniques by polymerase chain reaction.In cutaneous forms of anthrax, although the local course is not influenced by the treatment, antibiotic therapy is necessary to control any bacterial distribution. A case of exposure similar to that of a confirmed human case or an exposure identified by epidemiologic inquiry should usually result in chemoprophylaxis. Chemoprophylaxis for the close relations of a patient or for health workers is unnecessary since person-to-person transmission has not been reported.

The secret life of the anthrax agent Bacillus anthracis: bacteriophage-mediated ecological adaptations

Ecological and genetic factors that govern the occurrence and persistence of anthrax reservoirs in the environment are obscure. A central tenet, based on limited and often conflicting studies, has long held that growing or vegetative forms of Bacillus anthracis survive poorly outside the mammalian host and must sporulate to survive in the environment. Here, we present evidence of a more dynamic lifecycle, whereby interactions with bacterial viruses, or bacteriophages, elicit phenotypic alterations in B. anthracis and the emergence of infected derivatives, or lysogens, with dramatically altered survival capabilities. Using both laboratory and environmental B. anthracis strains, we show that lysogeny can block or promote sporulation depending on the phage, induce exopolysaccharide expression and biofilm formation, and enable the long-term colonization of both an artificial soil environment and the intestinal tract of the invertebrate redworm, Eisenia fetida. All of the B. anthracis lysogens existed in a pseudolysogenic-like state in both the soil and worm gut, shedding phages that could in turn infect non-lysogenic B. anthracis recipients and confer survival phenotypes in those environments. Finally, the mechanism behind several phenotypic changes was found to require phage-encoded bacterial sigma factors and the expression of at least one host-encoded protein predicted to be involved in the colonization of invertebrate intestines. The results here demonstrate that during its environmental phase, bacteriophages provide B. anthracis with alternatives to sporulation that involve the activation of soil-survival and endosymbiotic capabilities.

A DNA microarray facilitates the diagnosis of Bacillus anthracis in environmental samples

AIMS

In order to improve the diagnosis of Bacillus anthracis in environmental samples, we established a DNA microarray based on the ArrayTube technology of Clondiag.

METHODS AND RESULTS

Total DNA of a bacterial colony is randomly biotinylated and hybridized to the array. The probes on the array target the virulence genes, the genomic marker gene rpoB, as well as the selective 16S rDNA sequence regions of B. anthracis, of the Bacillus cereus group and of Bacillus subtilis. Eight B. anthracis reference strains were tested and correctly identified. Among the analysed environmental Bacillus isolates, no virulent B. anthracis strain was detected.

CONCLUSIONS

This array clearly differentiates B. anthracis from members of the B. cereus group and other Bacillus species in environmental samples by chromosomal (rpoB) and plasmid markers. Additionally, recognition of B. cereus strains harbouring the toxin genes or atypical B. anthracis strains that have lost the virulence plasmids is feasible.

SIGNIFICANCE AND IMPACT OF THE STUDY

The array is applicable to the complex diagnostics for B. anthracis detection in environmental samples. Because of low costs, high security and easy handling, the microarray is applicable to routine diagnostics.

A simple and sensitive method for detection of Bacillus anthracis by loop-mediated isothermal amplification

AIMS

To develop a rapid and simple system for detection of Bacillus anthracis using a loop-mediated isothermal amplification (LAMP) method and determine the suitability of LAMP for rapid identification of B. anthracis infection.

METHODS AND RESULTS

A specific LAMP assay targeting unique gene sequences in the bacterial chromosome and two virulence plasmids, pXO1 and pXO2, was designed. With this assay, it was possible to detect more than 10 fg of bacterial DNA per reaction and obtain results within 30-40 min under isothermal conditions at 63 degrees C. No cross-reactivity was observed among Bacillus cereus group and other Bacillus species. Furthermore, in tests using blood specimens from mice inoculated intranasally with B. anthracis spores, the sensitivity of the LAMP assay following DNA extraction methods using a Qiagen DNeasy kit or boiling protocol was examined. Samples prepared by both methods showed almost equivalent sensitivities in LAMP assay. The detection limit was 3.6 CFU per test.

CONCLUSIONS

The LAMP assay is a simple, rapid and sensitive method for detecting B. anthracis.

SIGNIFICANCE AND IMPACT OF THE STUDY

The LAMP assay combined with boiling extraction could be used as a simple diagnostic method for identification of B. anthracis infection.

Real-time PCR system targeting a chromosomal marker specific for Bacillus anthracis

Specific identification of Bacillus anthracis and differentiation from closely related Bacillus cereus and Bacillus thuringiensis strains is still a major diagnostic problem. Commercially available diagnostic kits targeting plasmid-markers cannot differentiate between B. anthracis, non-anthracis Bacillus species harbouring anthrax-specific virulence plasmids, and plasmidless B. anthracis strains. A TaqMan PCR assay was designed targeting sequences of gene locus BA_5345 of the B. anthracis strain Ames. Specificity was determined by using a panel of 328 Bacillus strains; sensitivity was determined by probit analysis. All B. anthracis isolates (n=92) were specifically detected by using the genomic TaqMan PCR assay whereas 236 strains belonging to 19 Bacillus species other than B. anthracis were PCR negative. The detection limit was determined to be 12.7 copies per reaction (95% confidence interval 10.2-17.5 copies). Here we present an extensively evaluated and - to our current knowledge - specific TaqMan PCR assay for the detection of B. anthracis based on a chromosomal marker.

Genetic distribution of 295 Bacillus cereus group members based on adk-screening in combination with MLST (Multilocus Sequence Typing) used for validating a primer targeting a chromosomal locus in B. anthracis

The genetic distribution of 295 Bacillus cereus group members has been investigated by using a modified Multilocus Sequence Typing method (MLST). By comparing the nucleic acid sequence of the adk gene fragment, isolates of B. cereus group members most related to B. anthracis may be easily identified. The genetic distribution, with focus on the B. anthracis close neighbours, was used to evaluate a new primer set for specific identification of B. anthracis. This primer set, BA5510-1/2, targeted the putative B. anthracis specific gene BA5510. Real-time PCR using BA5510-1/2 amplified the target fragment from all B. anthracis strains tested and only two (of 289) non-B. anthracis strains analysed. This is one of the most thoroughly validated chromosomal B. anthracis markers for real-time PCR identification, in which the screened collection contained several very closely related B. anthracis strains.

Loop-mediated isothermal amplification for rapid detection of Bacillus anthracis spores

A loop-mediated isothermal amplification (LAMP) assay system was employed for detecting Bacillus anthracis spores in pure cultures as well as in various simulated powder samples. The specificity of the designed LAMP primer sets was validated by assaying 13 B. anthracis strains and 33 non-B. anthracis species. The detection limits of the LAMP assay were 10 spores/tube for pure cultures and 100 spores/2 mg powder for simulated powder samples. The results show that the LAMP protocol is a promising method for detecting B. anthracis.

Bacillus cereus strains fall into two clusters (one closely and one more distantly related) to Bacillus anthracis according to amino acid substitutions in small acid-soluble proteins as determined by tandem mass spectrometry

Small acid-soluble proteins (SASPs) are located in the core region of Bacillus spores and have been previously demonstrated as reliable biomarkers for differentiating Bacillus anthracis and Bacillus cereus. Using MS and MS-MS analysis of SASPs further phylogenetic correlations among B. anthracis and B. cereus strains are described here. ESI was demonstrated to be a more comprehensive method, allowing for the analysis of intact proteins in both MS and MS-MS mode, thus providing molecular weight (MW) and sequence information in a single analysis, and requiring almost no sample preparation. MALDI MS was used for determination of MW of intact proteins; however, MS-MS analysis can only be achieved after enzymatic digestion of these proteins. It was demonstrated that the combination of the two different approaches provides confirmatory and complementary information, allowing for unambiguous protein characterization and sequencing. This study established that B. cereus strains fall into two clusters (one closely and one more distantly related) to B. anthracis as exhibited by amino acid substitutions. The closely related cluster was characterized by a beta-SASP with a single amino acid substitution, localized either close to the C terminus (phenylalanine-->tyrosine, 16 masses change) or close to the N terminus (serine-->alanine serine, also 16 masses change). The more distantly related cluster displayed both amino acid substitutions (32 masses change). One strain of B. cereus isolated from a patient with severe pneumonia (an anthrax-like disease) fell into the more distantly related cluster implying that pathogenicity and phylogenicity are not necessarily correlated features. Unlike PCR and DNA sequencing, protein sequence variation assessed by ESI MS-MS, essentially occurs in real-time, and involves simply extracting the protein and injecting into the instrument for analysis.

Comparison of PCR, culture and microscopy of blood smears for the diagnosis of anthrax in sheep and cattle

AIMS

To compare microscopy, culture and PCR for the diagnosis of anthrax in blood samples from sheep and cattle.

METHODS AND RESULTS

Blood samples were stored at room temperature and at 37 degrees C after receipt, over a period of 15-17 days. Aliquots were plated onto blood agar and blood smears were prepared. Following microscopic examination, DNA was extracted from blood smears and subjected to a multiplex PCR assay targeting the Ba813, cap and lef markers.

CONCLUSIONS

PCR provided the most reliable means for the detection of Bacillus anthracis in deteriorating blood samples (15-17 days) and was also successful in diagnosing anthrax in blood smears that had been stored for 6 years and a blood sample which had been stored for 18 months at -20 degrees C. While less successful than PCR, culture for B. anthracis on 7% sheep blood agar was typically more reliable (2-17 days) than the examination of blood smears (2-6 days) for encapsulated bacilli.

SIGNIFICANCE AND IMPACT OF THE STUDY

This work demonstrated the superiority of PCR for the diagnosis of anthrax from blood smear scrapings, particularly when microscopy is unreliable.

Characterization of Bacillus anthracis-like bacteria isolated from wild great apes from Cote d'Ivoire and Cameroon

We present the microbiological and molecular characterization of bacteria isolated from four chimpanzees and one gorilla thought to have died of an anthrax-like disease in Côte d'Ivoire and Cameroon. These isolates differed significantly from classic Bacillus anthracis by the following criteria: motility, resistance to the gamma phage, and, for isolates from Cameroon, resistance to penicillin G. A capsule was expressed not only after induction by CO(2) and bicarbonate but also under normal growth conditions. Subcultivation resulted in beta-hemolytic activity and gamma phage susceptibility in some subclones, suggesting differences in gene regulation compared to classic B. anthracis. The isolates from Côte d'Ivoire and Cameroon showed slight differences in their biochemical characteristics and MICs of different antibiotics but were identical in all molecular features and sequences analyzed. PCR and Southern blot analyses confirmed the presence of both the toxin and the capsule plasmid, with sizes corresponding to the B. anthracis virulence plasmids pXO1 and pXO2. Protective antigen was expressed and secreted into the culture supernatant. The isolates possessed variants of the Ba813 marker and the SG-749 fragment differing from that of classic B. anthracis strains. Multilocus sequence typing revealed a close relationship of our atypical isolates with both classic B. anthracis strains and two uncommonly virulent Bacillus cereus and Bacillus thuringiensis isolates. We propose that the newly discovered atypical B. anthracis strains share a common ancestor with classic B. anthracis or that they emerged recently by transfer of the B. anthracis plasmids to a strain of the B. cereus group.

Siderophores of Bacillus anthracis, Bacillus cereus, and Bacillus thuringiensis

Three Bacillus anthracis Sterne strains (USAMRIID, 7702, and 34F2) and Bacillus cereus ATCC 14579 excrete two catecholate siderophores, petrobactin (which contains 3,4-dihydroxybenzoyl moieties) and bacillibactin (which contains 2,3-dihydroxybenzoyl moieties). However, the insecticidal organism Bacillus thuringiensis ATCC 33679 makes only bacillibactin. Analyses of siderophore production by previously isolated [Cendrowski et al., Mol. Microbiol. 52 (2004) 407-417] B. anthracis mutant strains revealed that the B. anthracis bacACEBF operon codes for bacillibactin production and the asbAB gene region is required for petrobactin assembly. The two catecholate moieties also were synthesized by separate routes. PCR amplification identified both asbA and asbB genes in the petrobactin producing strains whereas B. thuringiensis ATCC 33679 retained only asbA. Petrobactin synthesis is not limited to the cluster of B. anthracis strains within the B. cereus sensu lato group (in which B. cereus, B. anthracis, and B. thuringiensis are classified), although petrobactin might be prevalent in strains with pathogenic potential for vertebrates.

Evaluation of different methods to discriminate Bacillus anthracis from other bacteria of the Bacillus cereus group

AIMS

To evaluate different methods that are useful for rapid and definitive discrimination of Bacillus anthracis from other bacteria of the Bacillus cereus group in environmental samples like letters claimed to contain anthrax spores.

METHODS AND RESULTS

Characterized strains and bacteria from environmental samples were analysed by microbiological and molecular methods (PCR and restriction analysis). Environmental isolates often shared several microbiological features with B. anthracis, e.g. lack of beta-haemolysis and phospholipase C activity, and only the gamma phage assay was specific for B. anthracis. PCR assays targeting markers from the virulence plasmids exclusively detected B. anthracis, but other PCR targets were also detected in nonanthrax isolates. Additionally, the restriction pattern in an AluI restriction analysis of the SG-749 fragment is not 100% specific. The loci used for multiple-locus variable-number tandem repeat analysis of B. anthracis are also present in other members of the B. cereus group, but amplicon sizes are usually different.

CONCLUSIONS

Environmental samples often contain borderline isolates closely related to B. anthracis both on microbiological and genetic levels. Real-time PCR targeting plasmidal and chromosomal markers should be used for rapid and definitive exclusion of a virulent strain of B. anthracis in such samples.

SIGNIFICANCE AND IMPACT OF THE STUDY

This study gives an overview of the current microbiological and molecular methods used for identification of B. anthracis and shows that most assays have limits when borderline isolates present in environmental samples are analysed.

Comparison of minisatellite polymorphisms in the Bacillus cereus complex: a simple assay for large-scale screening and identification of strains most closely related to Bacillus anthracis

Polymorphism of five tandem repeats that are monomorphic in Bacillus anthracis was investigated in 230 isolates of the B. cereus group and in 5 sequenced B. cereus genomes in search for markers allowing identification of B. cereus and B. thuringiensis strains most closely related to B. anthracis. Using this multiple-locus variable number of tandem repeat analysis (MLVA), a cluster of 30 strains was selected for further characterization. Eventually, six of these were characterized by multilocus sequence type analysis. One of the strains is only six point mutations (of almost 3,000 bp) away from B. anthracis and was also proposed to be closest to B. anthracis by MLVA analysis. However, this strain remains separated from B. anthracis by a number of significant genetic events observed in B. anthracis, including the loss of the hemolysin activity, the presence of four prophages, and the presence of the two virulence plasmids, pXO1 and pXO2. One particular minisatellite marker provides an efficient assay to identify the subset of B. cereus and B. thuringiensis strains closely related to B. anthracis. Based on these results, a very simple assay is proposed that allows the screening of hundreds of strains from the B. cereus complex, with modest equipment and at a low cost, to eventually fill the gap with B. anthracis and better understand the origin and making of this dangerous pathogen.

Bacillus anthracis: toxicology, epidemiology and current rapid-detection methods

B. anthracis, the causative agent for anthrax, has been well studied for over 150 years. Due to the genetic similarities among various Bacillus species, as well as its existence in both a spore form and a vegetative state, the detection and specific identification of B. anthracis have been proven to require complex techniques and/or laborious methods. With the heightened interest in the organism as a potential biological threat agent, a large number of interesting detection technologies have recently been developed, including methods involving immunological and nucleic acid-based assay formats. The technologies range from culture-based methods to portable Total Analysis Systems based on real-time PCR. This review with 170 references provides a brief background on the toxicology and epidemiology of B. anthracis, discusses challenges associated with its detection related to genetic similarities to other species, and reviews immunological and, with greater emphasis, nucleic acid-based detection systems.

Identification and characterization of Bacillus anthracis by multiplex PCR on DNA chip

Bacillus anthracis can be identified by detecting virulence factor genes located on two plasmids, pXO1 and pXO2. Combining multiplex PCR with arrayed anchored primer PCR and biotin-avidin alkaline phosphatase indicator system, we developed a qualitative DNA chip method for characterization of B. anthracis, and simultaneous confirmation of the species identity independent of plasmid contents. The assay amplifies pag gene (in pXO1), cap gene (in pXO2) and Ba813 gene (a B. anthracis specific chromosomal marker), and the results were indicated by an easy-to-read profile based on the color reaction of alkaline phosphatase. About 1 pg of specific DNA fragments on the chip wells could be detected after PCR. With the proposed method, the avirulent (pXO1+/2-, pXO1-/2+ and pXO1-/2-) strains of B. anthracis and distinguished 'anthrax-like' strains from other B. cereus group bacteria were unambiguously identified, while the genera other than Bacillus gave no positive signal.

Multiplex diagnostic platforms for detection of biothreat agents

The availability of rapid, sensitive and cost-effective diagnostic methods is paramount to the success of a comprehensive national health security system in the USA. The national networks that were established to safeguard US infrastructures (e.g., public health, livestock, agriculture and water supply) have developed sufficient capability and capacity for monitoring. However, additional advanced methods will be required to maintain operational readiness. Currently available methods, although sensitive and specific, are generally costly and not amenable to high-throughput analyses. Critical to the success of biothreat surveillance is the ability to screen for and detect multiple agents rapidly in a single reaction and with minimal sample processing. This review will examine currently available diagnostic platforms (i.e., PCR-, immuno- and array-based) and biosensors that can detect multiple biothreat analytes in a single reaction (i.e., multiplex assays). The maturity, benefits and limitations of each platform will be described and a prospective view, from current to future state of the art, will be proposed.

Electrogenerated Chemiluminescence. 77. DNA Hybridization Detection at High Amplification with [Ru(bpy)3]2+-Containing Microspheres

An ultrasensitive DNA hybridization detection method based on electrogenerated chemiluminescence (ECL) using polystyrene microspheres/beads (PSB) as the carrier of the ECL labels, namely, tris(2,2'-bipyridyl)ruthenium(II) tetrakis(pentafluorophenyl)borate (Ru(bpy)3[B(C6F5)4]2), is reported. Probe single-stranded DNA (p-ssDNA) was attached to the surface of magnetic beads (MB) and hybridized with target-ssDNA (t-ssDNA) with immobilized PSB containing a large number of water insoluble Ru(bpy)3[B(C6F5)4]2 species (approximately 7.5 x 10(9) molecules/bead). With this approach a large amplification factor of Ru(bpy)3[B(C6F5)4]2 molecules for each t-ssDNA can be achieved, when each PSB is attached to a limited number of t-ssDNA. The p-ssDNA-MB <--> t-ssDNA-PSB/Ru(bpy)3(2+) conjugates formed were magnetically separated from the reaction media and dissolved in MeCN containing tri-n-propylamine (TPrA) as an ECL coreactant. ECL was produced with a potential scan from 0 to 3.0 V versus Ag/Ag+, and the integrated ECL intensity was found to be linearly proportional to the t-ssDNA concentration in a range of 1.0 fM to 10 nM under optimized conditions. ECL signals associated with two base pair mismatched ssDNA and noncomplementary ssDNA can be distinguished well from the ECL signal related to the complementary DNA hybridization. A Poisson distribution is followed when a large number of MB reacts with PSB, and the minimum number of 1.0- and 2.8-microm diameter MB required to bind and magnetically separate a single 10-microm diameter PSB from the reaction solution was estimated to be three and one, respectively. The principle described in this paper could be also applied to many other ECL analyses, such as immunoassays.

Ruling out Bacillus anthracis

Optimization of methods for ruling out Bacillus anthracis leads to increased yields, faster turnaround times, and a lighter workload. We used 72 environmental non–B. anthracis bacilli to validate methods for ruling out B. anthracis. Most effective were horse blood agar, motility testing after a 2-h incubation in trypticase soy broth, and screening with a B. anthracis–selective agar.

Identification of Bacillus anthracis by multiprobe microarray hybridization

We have developed a rapid assay based on microarray analysis of amplified genetic markers for reliable identification of Bacillus anthracis and its discrimination from other closely related bacterial species of the Bacillus cereus group. By combining polymerase chain reaction (PCR) amplification of six B. anthracis-specific genes (plasmid-associated genes encoding virulence factors (cyaA, pagA, lef, and capA, capB, capC) and one chromosomal marker BA-5449) with analysis of amplicons by microarray hybridization, we were able to unambiguously identify and discriminate B. anthracis among other closely related species. Bacillus identification relied on hybridization with multiple individual microarray oligonucleotide probes (oligoprobes) specific to each target B. anthracis gene. Evaluation of the assay was conducted using several B. anthracis strains (with or without pXO1 and pXO2 plasmids) as well as over 50 other species phylogenetically related to B. anthracis, including B. cereus, B. thuringiensis, B. mycoides, and B. subtilis. The developed microarray analysis of amplified genetic markers protocol provides an efficient method for (i) unambiguous identification and discrimination of B. anthracis from other Bacillus species and (ii) distinguishing between plasmid-containing and plasmid-free Bacillus anthracis strains.

Electrogenerated chemiluminescence. 72. Determination of immobilized DNA and C-reactive protein on Au(111) electrodes using tris(2,2'-bipyridyl)ruthenium(II) labels

Anodic electrogenerated chemiluminescence (ECL) with tri-n-propylamine (TPrA) as a coreactant was used to determine DNA and C-reactive protein (CRP) by immobilizations on Au(111) electrodes using tris(2,2'-bipyridyl)ruthenium(II) (Ru(bpy)(3)(2+)) labels. A 23-mer synthetic single-stranded (ss) DNA derived from the Bacillus anthracis with an amino-modified group at the 5' end position was covalently attached to the Au(111) substrate precoated with a self-assembled thiol monolayer of 3-mercaptopropanoic acid (3-MPA) in the presence of 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide hydrochloride (EDAC) and then hybridized with a target ssDNA tagged with Ru(bpy)(3)(2+) ECL labels. Similarly, biotinylated anti-CRP species were immobilized effectively onto the Au(111) substrate precovered with a layer of avidin linked covalently via the reaction between avidin and a mixed thiol monolayer of 3-MPA and 16-mercaptohexadecanoic acid on Au(111) in the presence of EDAC and N-hydroxysuccinimide. CRP and anti-CRP tagged with Ru(bpy)(3)(2+) labels were then conjugated to the surface layer. ECL responses were generated from the modified electrodes described above by immersing them in a TPrA-containing electrolyte solution. A series of electrode treatments, including blocking free -COOH groups with ethanol amine, pinhole blocking with bovine serum albumin, washing with EDTA/NaCl/Tris buffer, and spraying with inert gases, were used to reduce the nonspecific adsorption of the labeled species. The ECL peak intensity was linearly proportional to the analyte CRP concentration over the range 1-24 microg/mL. CRP concentrations of two unknown human plasma/serum specimens were measured by the standard addition method based on this technique.

Detection of the Bacillus anthracis gyrA gene by using a minor groove binder probe

Identification of chromosomal markers for rapid detection of Bacillus anthracis is difficult because significant chromosomal homology exists among B. anthracis, Bacillus cereus, and Bacillus thuringiensis. We evaluated the bacterial gyrA gene as a potential chromosomal marker for B. anthracis. A real-time PCR assay was developed for the detection of B. anthracis. After analysis of the unique nucleotide sequence of the B. anthracis gyrA gene, a fluorescent 3' minor groove binding probe was tested with 171 organisms from 29 genera of bacteria, including 102 Bacillus strains. The assay was found to be specific for all 43 strains of B. anthracis tested. In addition, a test panel of 105 samples was analyzed to evaluate the potential diagnostic capability of the assay. The assay showed 100% specificity, demonstrating the usefulness of the gyrA gene as a specific chromosomal marker for B. anthracis.

Identification of Bacillus anthracis specific chromosomal sequences by suppressive subtractive hybridization

Background

Bacillus anthracis, Bacillus thuringiensis and Bacillus cereus are closely related members of the B. cereus-group of bacilli. Suppressive subtractive hybridization (SSH) was used to identify specific chromosomal sequences unique to B. anthracis.

Results

Two SSH libraries were generated. Genomic DNA from plasmid-cured B. anthracis was used as the tester DNA in both libraries, while genomic DNA from either B. cereus or B. thuringiensis served as the driver DNA. Progressive screening of the libraries by colony filter and Southern blot analyses identified 29 different clones that were specific for the B. anthracis chromosome relative not only to the respective driver DNAs, but also to seven other different strains of B. cereus and B. thuringiensis included in the process. The nucleotide sequences of the clones were compared with those found in genomic databases, revealing that over half of the clones were located into 2 regions on the B. anthracis chromosome.

Conclusions

Genes encoding potential cell wall synthesis proteins dominated one region, while bacteriophage-related sequences dominated the other region. The latter supports the hypothesis that acquisition of these bacteriophage sequences occurred during or after speciation of B. anthracis relative to B. cereus and B. thuringiensis. This study provides insight into the chromosomal differences between B. anthracis and its closest phylogenetic relatives.

Molecular detection of anthrax spores on animal fibres

AIMS

To develop a rapid, specific and sensitive diagnostic test for the detection of the spores of Bacillus anthracis on commercial samples of animal fibres (e.g. wool and cashmere).

METHODS AND RESULTS

Extraction of DNA from spores using a mechanical disruption method based on bead beating was evaluated but subsequently abandoned as it compromised the sensitivity of the overall protocol. A multiplex PCR and two nested amplification reactions designed for B. anthracis were developed during this study.

CONCLUSIONS

A simple selective incubation step in combination with multiplex PCR was found to be more effective than generic DNA extraction coupled to a sensitive nested amplification reaction.

SIGNIFICANCE AND IMPACT OF THE STUDY

The rapid diagnostic test could be applied to the analysis of commercial fibre samples for the detection of anthrax as required by health and safety legislation resulting in considerable savings in time and expense.

Novel sample preparation method for safe and rapid detection of Bacillus anthracis spores in environmental powders and nasal swabs

Bacillus anthracis spores have been used as a biological weapon in the United States. We wanted to develop a safe, rapid method of sample preparation that provided safe DNA for the detection of spores in environmental and clinical specimens. Our method reproducibly detects B. anthracis in samples containing <10 spores.

PCR assay to detect Bacillus anthracis spores in heat-treated specimens

Recent interest in anthrax is due to its potential use in bioterrorism and as a biowarfare agent against civilian populations. The development of rapid and sensitive techniques to detect anthrax spores in suspicious specimens is the most important aim for public health. With a view to preventing exposure of laboratory workers to viable Bacillus anthracis spores, this study evaluated the suitability of PCR assays for detecting anthrax spores previously inactivated at 121 degrees C for 45 min. The results indicate that heat treatment ensures the complete inactivation of B. anthracis spores without significantly affecting the efficiency of PCR assays.

PCR-based detection of Bacillus anthracis in formalin-fixed tissue from a patient receiving ciprofloxacin

We demonstrate that Bacillus anthracis may be detected from a formalin-fixed, paraffin-embedded biopsy specimen, even after the patient has received antibiotic treatment. Although traditional PCR methods may not be sufficiently sensitive for anthrax detection in such patients, cycle numbers can be increased or PCR can be repeated by using an aliquot from a previous PCR as the template.

Characterization of a repetitive element polymorphism-polymerase chain reaction chromosomal marker that discriminates Bacillus anthracis from related species

AIMS

To identify a chromosomal marker with signature nucleotides specific for Bacillus anthracis.

METHODS AND RESULTS

Repetitive element polymorphism-polymerase chain reaction with BOX-A1R primer was used to discriminate 52 strains of all six species of the 'B. cereus group'. A B. anthracis signature fragment, named AC-390, was cloned and sequenced. The deduced amino acid sequence was homologous to that of YwfK of B. subtilis. Using two internal primers, the AC-390 fragment was sequenced from two other B. anthracis strains as well as from strains of B. cereus and B.thuringiensis which have an AC-390 fragment homologous to that of B. anthracis as shown by Southern hybridization experiments.

CONCLUSIONS

Two new signature sequences specific for B. anthracis were identified on a chromosomal fragment homologous to YwfK, a transcriptional regulator of B. subtilis.

SIGNIFICANCE AND IMPACT OF THE STUDY

These results show a new chromosomal DNA trait useful for distinguishing B. anthracis from the related species of the B. cereus group, regardless of the presence of the virulence plasmids pXO1 and pXO2.