Elastic fibre organization in the intervertebral discs of the bovine tail

Role of mechanical representativity in multiaxial and transverse mechanics of human annulus fibrosus: A microstructure-based biphasic finite element study

The annulus fibrosus (AF) of the intervertebral disc is composed of a hierarchically organized network of micro-sized oriented collagen fibers (OCF) and nano-sized elastic fibers (NEF) embedded within a fluid-saturated matrix. Interlamellar (ILM) zones provide cohesion between adjacent AF lamellae (LM) and the OCF network. This complex microstructure varies depending on the disc region, thereby affecting both multiaxial and transverse AF mechanics. Accurately replicating experimental observations in numerical models requires ensuring that the specimen is representative in terms of geometry, dimensions, intrinsic architecture, and boundary conditions. Variations in specimen configurations, measurement zones, and boundary conditions in mechanical tests - whether experimental or numerical - can significantly influence the observed behavior and impact result accuracy. In this study, we investigate the role of mechanical representativity using a microstructure-based, biphasic finite element model. The properties of the AF elementary constituents are determined through a multi-step identification process informed by experimental stretching data from the literature: first, multi-lamellar axial stretching identifies matrix properties; second, multi-lamellar radial stretching isolates NEF properties; and finally, single-lamellar tests along the OCF direction determine OCF properties. The model predictions are verified against a broad spectrum of monotonic experiments from the literature, including uniaxial tension and compression, biaxial tension, and shear across different disc regions, with a thorough analysis of test conditions. Our analysis highlights the significant impact of preload and strain measurement zone selection on shear and biaxial stretching outcomes. The model further explores the poorly understood interplay between strain rate, fiber orientation, and fluid flow during circumferential stretching, revealing mechanisms that lead to either radial transverse swelling or shrinkage. Additionally, we analyze the influence of mechanical representativity - particularly the alternation between LM and ILM - on numerical predictions, shedding light on an aspect rarely addressed in other ILM-inclusive numerical models. STATEMENT OF SIGNIFICANCE: The mechanical representativity of numerically reproduced specimens and testing conditions is a key factor in ensuring the predictive accuracy of computational models based on experimental mechanical data, particularly for materials with complex microstructures. This study presents a microstructure-based biphasic computational model that incorporates the hierarchical organization of the collagen network to replicate the regional, anisotropic, and multiaxial behavior of the human annulus fibrosus. The model demonstrates the significant influence of specimen representativity and testing conditions - such as specimen dimensions, strain measurement zones, and preload - on multiaxial response predictions. Additionally, it attributes the complex and poorly understood radial auxetic response observed experimentally during circumferential stretching to fluid-microstructure interactions, while examining the interconnected effects of loading rate and lamellar-interlamellar representation.

HIF-1α protects nucleus pulposus cells from oxidative stress-induced mitochondrial impairment through PDK-1

The pathogenesis of intervertebral disc degeneration (IVDD) involves complex signaling networks and various effector molecules, and our understanding of the pathogenesis of IVDD is limited. Hypoxia inducible factor-1α (HIF-1α) is closely related to IVDD, and there is excessive oxidative stress concurrent with IVDD. In this study, we found that HIF-1α could protect nucleus pulposus cells from excessive oxidative stress by reversing the imbalance between oxidants and antioxidants and thus mitigating the oxidative stress-induced mitochondrial impairment. With further exploration, we found that pyruvate dehydrogenase kinase 1 (PDK-1) was involved in the protective effect of HIF-1α on nucleus pulposus cells under oxidative stress. We suggested that HIF-1α could preserve the mitochondrial integrity and activate glycolysis in nucleus pulposus cells via PDK-1, and the addition of DCA, a PDK-1 inhibitor, could blunt the protective effect of HIF-1α. In addition, the HIF-1α/PDK-1 regulatory axis was also confirmed in vivo through HIF-1α knockout mice model. Therefore, we propose that HIF-1α protects nucleus pulposus cells from excessive oxidative stress by maintaining the mitochondrial integrity and glycolysis via PDK-1, thus enriching the insight into the protective mechanism of HIF-1α against IVDD, and providing a novel therapeutic target for the treatment of IVDD.

A data-driven microstructure-based model for predicting circumferential behavior and failure in degenerated human annulus fibrosus

The degeneration of the intervertebral disc annulus fibrosus poses significant challenges in understanding and predicting its mechanical behavior. In this article, we present a novel approach, enriched with detailed insights into microstructure and degeneration progression, to accurately predict the mechanics of the degenerated human annulus. Central to this framework is a fully three-dimensional continuum-based model that integrates hydration state and multiscale structural features, including proteoglycan macromolecules and interpenetrating collagen fibrillar networks across various hierarchical levels within the multi-layered lamellar/inter-lamellar soft tissue, capable of sustaining deformation-induced damage. To ensure accurate and comprehensive predictions of the degenerated annulus mechanical behavior, we establish a data-driven correlation between disc degeneration grade and individual age, which influences the composition and mechanical integrity of annulus constituents while accounting for regional variations. The methodology includes a thorough identification of age- and grade-related evolutions of model inputs, followed by a detailed quantitative evaluation of the model predictive capabilities, with a focus on circumferential behavior and failure. The model successfully replicates experimental data, accurately capturing stiffness, transverse response (Poisson's ratio), and ultimate properties across different annulus regions, while also accommodating the modulation of the age/grade relationship. The reduction rates between normal and severe degeneration align reasonably well with experimental data, with the inner region exhibiting the largest decrease in stiffness (34.63 %) and no significant change observed in the outer region. Failure stress drops considerably in both regions (49.86 % in the inner and 45.33 % in the outer), while failure strain decreases by 36.39 % in the outer and 24.74 % in the inner. Our findings demonstrate that the proposed framework significantly enhances the predictive accuracy of annulus mechanics across a spectrum of degeneration levels, from normal to severely degenerated states. This approach promises improved predictive accuracy, deeper insights into disc health and injury risk, and a robust foundation for further research on the impact of degeneration on disc integrity. STATEMENT OF SIGNIFICANCE: Understanding and predicting the mechanical behavior of degenerated human annulus fibrosus remains a significant challenge due to the complex interplay of structural, biochemical, and age-related factors. This study presents a microstructure-based approach to address this challenge by integrating hydration state, detailed structural features across hierarchical scales, and deformation-induced damage and failure, alongside age-related changes and degeneration grade factors. This approach enables accurate simulations of annulus mechanics across regions, with model results thoroughly compared to available data, reinforcing its applicability in capturing degeneration effects. By capturing the intricate interactions between microstructure and mechanical behavior in degenerated discs, the model lays a strong foundation for improving clinical assessments and guiding future treatment strategies for disc-related conditions.

Diverse and multifunctional roles for perlecan (HSPG2) in repair of the intervertebral disc

Perlecan is a widely distributed, modular, and multifunctional heparan sulfate proteoglycan, which facilitates cellular communication with the extracellular environment to promote tissue development, tissue homeostasis, and optimization of biomechanical tissue functions. Perlecan-mediated osmotic mechanotransduction serves to regulate the metabolic activity of cells in tissues subjected to tension, compression, or shear. Perlecan interacts with a vast array of extracellular matrix (ECM) proteins through which it stabilizes tissues and regulates the proliferation or differentiation of resident cell populations. Here we examine the roles of the HS-proteoglycan perlecan in the normal and destabilized intervertebral disc. The intervertebral disc cell has evolved to survive in a hostile weight bearing, acidic, low oxygen tension, and low nutrition environment, and perlecan provides cytoprotection, shields disc cells from excessive compressive forces, and sequesters a range of growth factors in the disc cell environment where they aid in cellular survival, proliferation, and differentiation. The cells in mechanically destabilized connective tissues attempt to re-establish optimal tissue composition and tissue functional properties by changing the properties of their ECM, in the process of chondroid metaplasia. We explore the possibility that perlecan assists in these cell-mediated tissue remodeling responses by regulating disc cell anabolism. Perlecan's mechano-osmotic transductive property may be of potential therapeutic application.

Metformin prevents the onset and progression of intervertebral disc degeneration: New insights and potential mechanisms (Review)

Metformin has been the go‑to medical treatment for addressing type 2 diabetes mellitus (T2DM) as a frontline oral antidiabetic. Obesity, cancer and bone deterioration are linked to T2DM, which is considered a metabolic illness. Numerous diseases associated with T2DM, such as tumours, cardiovascular disease and bone deterioration, may be treated with metformin. Intervertebral disc degeneration (IVDD) is distinguished by degeneration of the spinal disc, accompanied by the gradual depletion of proteoglycans and water in the nucleus pulposus (NP) of the IVD, resulting in lower back pain. The therapeutic effect of metformin on IVDD has also attracted much attention. By stimulating AMP‑activated kinase, metformin could enhance autophagy and suppress cell senescence, apoptosis and inflammation, thus effectively delaying IVDD. The present review aimed to systematically explain the development of IVDD and mechanism of metformin in the treatment and prevention of IVDD to provide a reference for the clinical application of metformin as adjuvant therapy in the treatment of IVDD.

Structure-function characterization of the transition zone in the intervertebral disc

Understanding the structure-function relationship in the intervertebral disk (IVD) is crucial for the development of novel tissue engineering strategies to regenerate IVD and the establishment of accurate computational models for low back pain research. A large number of studies have improved our knowledge of the mechanical and structural properties of the nucleus pulposus (NP) and annulus fibrosus (AF), two of the main regions in the IVD. However, few studies have focused on the AF-NP interface (transition zone; TZ). Therefore, the current study aims to, for the first time, characterize the cyclic and failure mechanical properties of the TZ region under physiological loading (1, 3, and 5%s^-1 strain rates) and investigate the structural integration mechanisms between the NP, TZ, and AF regions. The results of the current study reveal significant effects of region (NP, TZ, and AF) and strain rates (1, 3, and 5%s^-1) on stiffness (p < 0.001). In addition, energy absorption is significantly higher for the AF compared to the TZ and NP (p <0.001) as well as between the TZ and NP (p <0.001). The current research finds adaptation, direct penetration, and entanglement between TZ and AF fibers as three common mechanisms for structural integration between the TZ and AF regions. STATEMENT OF SIGNIFICANCE: Despite a large number of studies that have mechanically, structurally, and biologically characterized the nucleus pulposus (NP) and annulus fibrosus (AF) regions, few studies have focused on the NP-AF interface region (known as Transition Zone; TZ) in the IVD; hence, our understanding of the TZ structure-function relationship is still incomplete. Of particular importance, the cyclic mechanical properties of the TZ, compared to the adjacent regions (NP and AF), are yet to be explored and the precise nature of the structural integration between the NP and AF via the TZ region is not yet known. The current study explores both the mechanical and structural properties of the TZ region to ultimately identify the mechanism of integration between the NP and AF.

Elastic Fibers in the Intervertebral Disc: From Form to Function and toward Regeneration

Despite extensive efforts over the past 40 years, there is still a significant gap in knowledge of the characteristics of elastic fibers in the intervertebral disc (IVD). More studies are required to clarify the potential contribution of elastic fibers to the IVD (healthy and diseased) function and recommend critical areas for future investigations. On the other hand, current IVD in-vitro models are not true reflections of the complex biological IVD tissue and the role of elastic fibers has often been ignored in developing relevant tissue-engineered scaffolds and realistic computational models. This has affected the progress of IVD studies (tissue engineering solutions, biomechanics, fundamental biology) and translation into clinical practice. Motivated by the current gap, the current review paper presents a comprehensive study (from the early 1980s to 2022) that explores the current understanding of structural (multi-scale hierarchy), biological (development and aging, elastin content, and cell-fiber interaction), and biomechanical properties of the IVD elastic fibers, and provides new insights into future investigations in this domain.

Detailed mechanical characterization of the transition zone: New insight into the integration between the annulus and nucleus of the intervertebral disc

The Nucleus Pulposus (NP) and Annulus Fibrous (AF) are two primary regions of the intervertebral disc (IVD). The interface between the AF and NP, where the gradual transition in structure and type of fibers are observed, is known as the Transition Zone (TZ). Recent structural studies have shown that the TZ contains organized fibers that appear to connect the NP to the AF. However, the mechanical characteristics of the TZ are yet to be explored. The current study aimed to investigate the mechanical properties of the TZ at the anterolateral (AL) and posterolateral (PL) regions in both radial and circumferential directions of loading using ovine IVDs (N = 28). Young's and toe moduli, maximum stress, failure strain, strain at maximum stress, and toughness were calculated mechanical parameters. The findings from this study revealed that the mechanical properties of the TZ, including young's modulus (p = 0.001), failure strain (p < 0.001), strain at maximum stress (p = 0.002), toughness (p = 0.027), and toe modulus (p = 0.005), were significantly lower for the PL compared to the AL region. Maximum stress was not significantly different between the PL and AL regions (p = 0.164). We found that maximum stress (p = 0.002), failure strain (p < 0.001), and toughness (p = 0.001) were significantly different in different loading directions. No significant differences for modulus (young's; p = 0.169 and toe; p = 0.352) and strain at maximum stress (p = 0.727) were found between the radial and circumferential loading directions. STATEMENT OF SIGNIFICANCE: To date there has not been a study that has investigated the mechanical characterization of the annulus (AF)-nucleus (NP) interface (transition zone; TZ) in the intervertebral disc (IVD), nor is it known whether the posterolateral (PL) and anterolateral (AL) regions of the TZ exhibit different mechanical properties. Accordingly, the TZ mechanical properties have been rarely used in the development of computational IVD models and relevant tissue-engineered scaffolds. The current research reported the mechanical properties of the TZ region and revealed that its mechanical properties were significantly lower for the PL compared to the AL region. These new findings enhance our knowledge about the nature of AF-NP integration and may help to develop more realistic tissue-engineered or computational IVD models.

Self-Assembling Peptide Hydrogels as Functional Tools to Tackle Intervertebral Disc Degeneration

Low back pain (LBP), caused by intervertebral disc (IVD) degeneration, is a major contributor to global disability. In its healthy state, the IVD is a tough and well-hydrated tissue, able to act as a shock absorber along the spine. During degeneration, the IVD is hit by a cell-driven cascade of events, which progressively lead to extracellular matrix (ECM) degradation, chronic inflammation, and pain. Current treatments are divided into palliative care (early stage degeneration) and surgical interventions (late-stage degeneration), which are invasive and poorly efficient in the long term. To overcome these limitations, alternative tissue engineering and regenerative medicine strategies, in which soft biomaterials are used as injectable carriers of cells and/or biomolecules to be delivered to the injury site and restore tissue function, are currently being explored. Self-assembling peptide hydrogels (SAPHs) represent a promising class of de novo synthetic biomaterials able to merge the strengths of both natural and synthetic hydrogels for biomedical applications. Inherent features, such as shear-thinning behaviour, high biocompatibility, ECM biomimicry, and tuneable physiochemical properties make these hydrogels appropriate and functional tools to tackle IVD degeneration. This review will describe the pathogenesis of IVD degeneration, list biomaterials requirements to attempt IVD repair, and focus on current peptide hydrogel materials exploited for this purpose.

Development, Pathogenesis, and Regeneration of the Intervertebral Disc: Current and Future Insights Spanning Traditional to Omics Methods

The intervertebral disc (IVD) is the fibrocartilaginous joint located between each vertebral body that confers flexibility and weight bearing capabilities to the spine. The IVD plays an important role in absorbing shock and stress applied to the spine, which helps to protect not only the vertebral bones, but also the brain and the rest of the central nervous system. Degeneration of the IVD is correlated with back pain, which can be debilitating and severely affects quality of life. Indeed, back pain results in substantial socioeconomic losses and healthcare costs globally each year, with about 85% of the world population experiencing back pain at some point in their lifetimes. Currently, therapeutic strategies for treating IVD degeneration are limited, and as such, there is great interest in advancing treatments for back pain. Ideally, treatments for back pain would restore native structure and thereby function to the degenerated IVD. However, the complex developmental origin and tissue composition of the IVD along with the avascular nature of the mature disc makes regeneration of the IVD a uniquely challenging task. Investigators across the field of IVD research have been working to elucidate the mechanisms behind the formation of this multifaceted structure, which may identify new therapeutic targets and inform development of novel regenerative strategies. This review summarizes current knowledge base on IVD development, degeneration, and regenerative strategies taken from traditional genetic approaches and omics studies and discusses the future landscape of investigations in IVD research and advancement of clinical therapies.

Differential characterization of lumbar spine associated tissue histology with nonlinear optical microscopy

Percutaneous endoscopic lumbar discectomy (PELD) is the major effective treatment for lumbar disc herniation, and rapid histological identification of dissected tissue is critical to guide the discectomy. In this work, we revealed the histological features of different types of peridural tissues of the lumbar spine by label-free multi-modal nonlinear optical microscopy. Stimulated Raman scattering (SRS) was used to extract lipid and protein distributions, while second harmonic generation (SHG) and two-photon excited fluorescence (TPEF) signals were applied to image the collagen and elastin fibers at the same time. Our results demonstrated that the nonlinear optical features of the dura and adjacent soft tissues were significantly different, showing the potentials of our method for intraoperative differentiation of these critical tissues and improving the surgical outcome of PELD.

Modeling multiaxial damage regional variation in human annulus fibrosus

In the present article, a fully three-dimensional human annulus fibrosus model is developed by considering the regional variation of the complex structural organization of collagen network at different scales to predict the regional anisotropic multiaxial damage of the intervertebral disc. The model parameters are identified using experimental data considering as elementary structural unit, the single annulus lamellae stretched till failure along the micro-sized collagen fibers. The multi-layered lamellar/inter-lamellar annulus model is constructed by considering the effective interactions between adjacent layers and the chemical-induced volumetric strain. The regional dependent model predictions are analyzed under various loading modes and compared to experimental data when available. The stretching along the circumferential and radial directions till failure serves to check the predictive capacities of the annulus model. Model results under simple shear, biaxial stretching and plane-strain compression are further presented and discussed. Finally, a full disc model is constructed using the regional annulus model and simulations are presented to assess the most likely failed areas under disc axial compression. STATEMENT OF SIGNIFICANCE: The damage in annulus soft tissues is a complex multiscale phenomenon due to a complex structural arrangement of collagen network at different scales of hierarchical organization. A fully three-dimensional constitutive representation that considers the regional variation of the structural complexity to estimate annulus multiaxial mechanics till failure has not yet been developed. Here, a model is developed to predict deformation-induced damage and failure of annulus under multiaxial loading histories considering as time-dependent physical process both chemical-induced volumetric effects and damage accumulation. After model identification using single lamellae extracted from different disc regions, the model predictability is verified for various multiaxial elementary loading modes representative of the spine movement. The heterogeneous mechanics of a full human disc model is finally presented.

Biochemical and immuno-histochemical localization of type IIA procollagen in annulus fibrosus of mature bovine intervertebral disc

For next generation tissue-engineered constructs and regenerative medicine to succeed clinically, the basic biology and extracellular matrix composition of tissues that these repair techniques seek to restore have to be fully determined. Using the latest reagents coupled with tried and tested methodologies, we continue to uncover previously undetected structural proteins in mature intervertebral disc. In this study we show that the “embryonic” type IIA procollagen isoform (containing a cysteine-rich amino propeptide) was biochemically detectable in the annulus fibrosus of both calf and mature steer caudal intervertebral discs, but not in the nucleus pulposus where the type IIB isoform was predominantly localized. Specifically, the triple-helical type IIA procollagen isoform immunolocalized in the outer margins of the inner annulus fibrosus. Triple helical processed type II collagen exclusively localized within the inter-lamellae regions and with type IIA procollagen in the intra-lamellae regions. Mass spectrometry of the α1(II) collagen chains from the region where type IIA procollagen localized showed high 3-hydroxylation of Proline-944, a post-translational modification that is correlated with thin collagen fibrils as in the nucleus pulposus. The findings implicate small diameter fibrils of type IIA procollagen in select regions of the annulus fibrosus where it likely contributes to the organization of collagen bundles and structural properties within the type I-type II collagen transition zone.

Sensitivity of Intervertebral Disc Finite Element Models to Internal Geometric and Non-geometric Parameters

Finite element models are useful for investigating internal intervertebral disc (IVD) behaviours without using disruptive experimental techniques. Simplified geometries are commonly used to reduce computational time or because internal geometries cannot be acquired from CT scans. This study aimed to (1) investigate the effect of altered geometries both at endplates and the nucleus-anulus boundary on model response, and (2) to investigate model sensitivity to material and geometric inputs, and different modelling approaches (graduated or consistent fibre bundle angles and glued or cohesive inter-lamellar contact). Six models were developed from 9.4 T MRIs of bovine IVDs. Models had two variations of endplate geometry (a simple curved profile from the centre of the disc to the periphery, and precise geometry segmented from MRIs), and three variations of NP-AF boundary (linear, curved, and segmented). Models were subjected to axial compressive loading (to 0.86 mm at a strain rate of 0.1/s) and the effect on stiffness and strain distributions, and the sensitivity to modelling approaches was investigated. The model with the most complex geometry (segmented endplates, curved NP-AF boundary) was 3.1 times stiffer than the model with the simplest geometry (curved endplates, linear NP-AF boundary), although this difference may be exaggerated since segmenting the endplates in the complex geometry models resulted in a shorter average disc height. Peak strains were close to the endplates at locations of high curvature in the segmented endplate models which were not captured in the curved endplate models. Differences were also seen in sensitivity to material properties, graduated fibre angles, cohesive rather than glued inter-lamellar contact, and NP:AF ratios. These results show that FE modellers must take care to ensure geometries are realistic so that load is distributed and passes through IVDs accurately.

A Robust Multiscale and Multiphasic Structure-Based Modeling Framework for the Intervertebral Disc

A comprehensive understanding of multiscale and multiphasic intervertebral disc mechanics is crucial for designing advanced tissue engineered structures aiming to recapitulate native tissue behavior. The bovine caudal disc is a commonly used human disc analog due to its availability, large disc height and area, and similarities in biochemical and mechanical properties to the human disc. Because of challenges in directly measuring subtissue-level mechanics, such as in situ fiber mechanics, finite element models have been widely employed in spinal biomechanics research. However, many previous models use homogenization theory and describe each model element as a homogenized combination of fibers and the extrafibrillar matrix while ignoring the role of water content or osmotic behavior. Thus, these models are limited in their ability in investigating subtissue-level mechanics and stress-bearing mechanisms through fluid pressure. The objective of this study was to develop and validate a structure-based bovine caudal disc model, and to evaluate multiscale and multiphasic intervertebral disc mechanics under different loading conditions and with degeneration. The structure-based model was developed based on native disc structure, where fibers and matrix in the annulus fibrosus were described as distinct materials occupying separate volumes. Model parameters were directly obtained from experimental studies without calibration. Under the multiscale validation framework, the model was validated across the joint-, tissue-, and subtissue-levels. Our model accurately predicted multiscale disc responses for 15 of 16 cases, emphasizing the accuracy of the model, as well as the effectiveness and robustness of the multiscale structure-based modeling-validation framework. The model also demonstrated the rim as a weak link for disc failure, highlighting the importance of keeping the cartilage endplate intact when evaluating disc failure mechanisms in vitro. Importantly, results from this study elucidated important fluid-based load-bearing mechanisms and fiber-matrix interactions that are important for understanding disease progression and regeneration in intervertebral discs. In conclusion, the methods presented in this study can be used in conjunction with experimental work to simultaneously investigate disc joint-, tissue-, and subtissue-level mechanics with degeneration, disease, and injury.

3D virtual reconstruction and quantitative assessment of the human intervertebral disc's annulus fibrosus: a DTI tractography study

The intervertebral disc’s (IVD) annulus fibrosus (AF) retains the hydrostatic pressure of the nucleus pulposus (NP), controls the range of motion, and maintains the integrity of the motion segment. The microstructure of the AF is not yet fully understood and quantitative characterization is lacking, leaving a caveat in modern medicine’s ability to prevent and treat disc failure (e.g., disc herniation). In this study, we show a reconstruction of the 3D microstructure of the fibers that constitute the AF via MRI diffusion tensor imaging (DTI) followed by fiber tracking. A quantitative analysis presents an anisotropic structure with significant architectural differences among the annuli along the width of the fibrous belt. These findings indicate that the outer annuli's construction reinforces the IVD while providing a sufficient degree of motion. Our findings also suggest an increased role of the outer annuli in IVD nourishment.

Modeling of human intervertebral disc annulus fibrosus with complex multi-fiber networks

Collagen fibers within the annulus fibrosus (AF) lamellae are unidirectionally aligned with alternating orientations between adjacent layers. AF constitutive models often combine two adjacent lamellae into a single equivalent layer containing two fiber networks with a crisscross pattern. Additionally, AF models overlook the inter-lamellar matrix (ILM) as well as elastic fiber networks in between lamellae. We developed a nonhomogenous micromechanical model as well as two coarser homogenous hyperelastic and microplane models of the human AF, and compared their performances against measurements (tissue level uniaxial and biaxial tests as well as whole disc experiments) and seven published hyperelastic models. The micromechanical model had a realistic non-homogenous distribution of collagen fiber networks within each lamella and elastic fiber network in the ILM. For small matrix linear moduli (<0.2 MPa), the ILM showed substantial anisotropy (>10%) due to the elastic fiber network. However, at moduli >0.2 MPa, the effects of the elastic fiber network on differences in stress-strain responses at different directions disappeared (<10%). Variations in sample geometry and boundary conditions (due to uncertainty) markedly affected stress-strain responses of the tissue in uniaxial and biaxial tests (up to 16 times). In tissue level tests, therefore, simulations should represent testing conditions (e.g., boundary conditions, specimen geometry, preloads) as closely as possible. Stress/strain fields estimated from the single equivalent layer approach (conventional method) yielded different results from those predicted by the anatomically more accurate apparoach (i.e., layerwise). In addition, in a disc under a compressive force (symmetric loading), asymmetric stress-strain distributions were computed when using a layerwise simulation. Although all developed and selected published AF models predicted gross compression-displacement responses of the whole disc within the range of measured data, some showed excessively stiff or compliant responses under tissue-level uniaxial/biaxial tests. This study emphasizes, when constructing and validating constitutive models of AF, the importance of the proper simulation of individual lamellae as distinct layers, and testing parameters (sample geometric dimensions/loading/boundary conditions).

The ultrastructural organization of elastic fibers at the interface of the nucleus and annulus of the intervertebral disk

There has been no study to describe the ultrastructural organization of elastic fibers at the interface of the nucleus pulposus and annulus fibrosus of the intervertebral disk (IVD), a region called the transition zone (TZ). A previously developed digestion technique was optimized to eliminate cells and non-elastin ECM components except for the elastic fibers from the anterolateral (AL) and posterolateral (PL) regions of the TZ in ovine IVDs. Not previously reported, the current study identified a complex elastic fiber network across the TZ for both AL and PL regions. In the AL region, this network consisted of major thick elastic fibers (≈ 1 µm) that were interconnected with delicate (< 200 nm) elastic fibers. While the same ultrastructural organization was observed in the PL region, interestingly the size of the elastic fibers was smaller (< 100 nm) compared to those that were located in the AL region. Quantitative analysis of the elastic fibers revealed significant differences in the size (p < 0.001) and the orientation of elastic fibers (p = 0.001) between the AL and PL regions, with a higher orientation and larger size of elastic fibers observed in the AL region. The gradual elimination of cells and non-elastin extracellular matrix components identified that elastic fibers in the TZ region in combination with the extracellular matrix created a honeycomb structure that was more compact at the AF interface compared to that located close to the NP. Three different symmetrically organized angles of rotation (0⁰ and ±90⁰) were detected for the honeycomb structure at both interfaces, and the structure was significantly orientated at the TZ-AF compared to the TZ-NP interface (p = 0.003).

Elastic fibers: The missing key to improve engineering concepts for reconstruction of the Nucleus Pulposus in the intervertebral disc

The increasing prevalence of low back pain has imposed a heavy economic burden on global healthcare systems. Intense research activities have been performed for the regeneration of the Nucleus Pulposus (NP) of the IVD; however, tissue-engineered scaffolds have failed to capture the multi-scale structural hierarchy of the native tissue. The current study revealed for the first time, that elastic fibers form a network across the NP consisting of straight and thick parallel fibers that were interconnected by wavy fine fibers and strands. Both straight fibers and twisted strands were regularly merged or branched to form a fine elastic network across the NP. As a key structural feature, ultrathin (53 ± 7 nm), thin (215 ± 20 nm), and thick (890 ± 12 nm) elastic fibers were observed in the NP. While our quantitative analysis for measurement of the thickness of elastic fibers revealed no significant differences (p < 0.633), the preferential orientation of fibers was found to be significantly different (p < 0.001) across the NP. The distribution of orientation for the elastic fibers in the NP represented one major organized angle of orientation except for the central NP. We found that the distribution of elastic fibers in the central NP was different from those located in the peripheral regions representing two symmetrically organized major peaks (±45⁰). No significant differences in the maximum fiber count at the major angles of orientation (±45⁰) were observed for both peripheral (p = 0.427) and central NP (p = 0.788). Based on these new findings a structural model for the elastic fibers in the NP was proposed. The geometrical presentation, along with the distribution of elastic fibers orientation, resulting from the present study identifies the ultrastructural organization of elastic fibers in the NP important towards understanding their mechanical role which is still under investigation. Given the results of this new geometrical analysis, more-accurate multiscale finite element models can now be developed, which will provide new insights into the mechanobiology of the IVD. In addition, the results of this study can potentially be used for the fabrication of bio-inspired tissue-engineered scaffolds and IVD models to truly capture the multi-scale structural hierarchy of IVDs. STATEMENT OF SIGNIFICANCE: Visualization of elastic fibers in the nucleus of the intervertebral disk under high magnification was not reported before. The present research utilized extracellular matrix partial digestion to address significant gaps in understanding of nucleus microstructure that can potentially be used for the fabrication of bio-inspired tissue-engineered scaffolds and disk models to truly capture the multi-scale structural hierarchy of discs.

Comprehensive review on intravertebral intraspinal, intrajoint, and intradiscal vacuum phenomenon: From anatomy and physiology to pathology

The term 'vacuum phenomenon' (VP), is characterized by gas-like density areas due to a rapid increase in the joint space volume ('acute VP') or represent a chronic gas collection. It can occur within a collapsed vertebral body, the spinal canal, joints but mainly the intervertebral disc. Studies support that VP is originated by a dynamic process involving the balance between tissues' liquid and gaseous components, influenced by the duration and the depth of mechanical and metabolic alterations, by the nature of neighboring tissues and the variability in both pressure and permeability of disc or vertebral or joint structures. Prevalence of VP in the general population is about 2%, reaching 20% in the elderly with disc degeneration. Although it's often a random finding in asymptomatic patients, VP is an eventually painful expression of disc degeneration, or disc or vertebral fracture, or bone lesions. In sporadic cases, intradiscal gas can be expelled (all-in-one or gradually), resulting in a gaseous cyst, causing pain and neurological symptoms. Considering that spontaneous resolution and recurrence after surgery are both possible, most of the authors recommend conservative treatment in patients with intradiscal and intravertebral VP; occasionally percutaneous CT(computed tomography) -guided aspiration or vertebral stabilization.

The role of estrogen in intervertebral disc degeneration

Intervertebral disc degeneration (IVDD) is a main contributor to low back and radicular pain, which imposes heavy economic burdens on society. However, the etiology and mechanism of IVDD are complex and still not completely clear. In particular, the role of estrogen in IVDD has not received much attention in recent research, although estrogen plays a crucial role in the metabolic dysfunction of others musculoskeletal structures, such as bone, muscle, and tendon. In this review, we attempt to describe the role of estrogen in IVDD and to summarize the proposed mechanisms in vivo and in vitro, as well as, to outline several interesting questions in this field.

Functional cell phenotype induction with TGF-β1 and collagen-polyurethane scaffold for annulus fibrosus rupture repair

Appropriate cell sources, bioactive factors and biomaterials for generation of functional and integrated annulus fibrosus (AF) tissue analogues are still an unmet need. In the present study, the AF cell markers, collagen type I, cluster of differentiation 146 (CD146), mohawk (MKX) and smooth muscle protein 22α (SM22α) were found to be suitable indicators of functional AF cell induction. In vitro 2D culture of human AF cells showed that transforming growth factor β1 (TGF-β1) upregulated the expression of the functional AF markers and increased cell contractility, indicating that TGF-β1-pre-treated AF cells were an appropriate cell source for AF tissue regeneration. Furthermore, a tissue engineered construct, composed of polyurethane (PU) scaffold with a TGF-β1-supplemented collagen type I hydrogel and human AF cells, was evaluated with in vitro 3D culture and ex vivo preclinical bioreactor-loaded organ culture models. The collagen type I hydrogel helped maintaining the AF functional phenotype. TGF-β1 supplement within the collagen I hydrogel further promoted cell proliferation and matrix production of AF cells within in vitro 3D culture. In the ex vivo IVD organ culture model with physiologically relevant mechanical loading, TGF-β1 supplement in the transplanted constructs induced the functional AF cell phenotype and enhanced collagen matrix synthesis. In conclusion, TGF-β1-containing collagen-PU constructs can induce the functional cell phenotype of human AF cells in vitro and in situ. This combined cellular, biomaterial and bioactive agent therapy has a great potential for AF tissue regeneration and rupture repair.

Mechanobiology of annulus fibrosus and nucleus pulposus cells in intervertebral discs

Low back pain (LBP) is a chronic condition that can affect up to 80% of the global population. It is the number one cause of disability worldwide and has enormous socioeconomic consequences. One of the main causes of this condition is intervertebral disc (IVD) degeneration. IVD degenerative processes and inflammation associated with it has been the subject of many studies in both tissue and cell level. It is believed that the phenotype of the resident cells within the IVD directly affects homeostasis of the tissue. At the same time, IVDs located between vertebral bodies of spine are under various mechanical loading conditions in vivo. Therefore, investigating how mechanical loading can affect the behaviour of IVD cells has been a subject of many research articles. In this review paper, following a brief explanation of the anatomy of the IVD and its resident cells, we compiled mechanobiological studies of IVD cells (specifically, annulus fibrosus and nucleus pulposus cells) and synthesized and discussed the key findings of the field.

Synchrotron tomography of intervertebral disc deformation quantified by digital volume correlation reveals microstructural influence on strain patterns

The intervertebral disc (IVD) has a complex and multiscale extracellular matrix structure which provides unique mechanical properties to withstand physiological loading. Low back pain has been linked to degeneration of the disc but reparative treatments are not currently available. Characterising the disc's 3D microstructure and its response in a physiologically relevant loading environment is required to improve understanding of degeneration and to develop new reparative treatments. In this study, techniques for imaging the native IVD, measuring internal deformation and mapping volumetric strain were applied to an in situ compressed ex vivo rat lumbar spine segment. Synchrotron X-ray micro-tomography (synchrotron CT) was used to resolve IVD structures at microscale resolution. These image data enabled 3D quantification of collagen bundle orientation and measurement of local displacement in the annulus fibrosus between sequential scans using digital volume correlation (DVC). The volumetric strain mapped from synchrotron CT provided a detailed insight into the micromechanics of native IVD tissue. The DVC findings showed that there was no slipping at lamella boundaries, and local strain patterns were of a similar distribution to the previously reported elastic network with some heterogeneous areas and maximum strain direction aligned with bundle orientation, suggesting bundle stretching and sliding. This method has the potential to bridge the gap between measures of macro-mechanical properties and the local 3D micro-mechanical environment experienced by cells. This is the first evaluation of strain at the micro scale level in the intact IVD and provides a quantitative framework for future IVD degeneration mechanics studies and testing of tissue engineered IVD replacements. STATEMENT OF SIGNIFICANCE: Synchrotron in-line phase contrast X-ray tomography provided the first visualisation of native intact intervertebral disc microstructural deformation in 3D. For two annulus fibrosus volumes of interest, collagen bundle orientation was quantified and local displacement mapped as strain. Direct evidence of microstructural influence on strain patterns could be seen such as no slipping at lamellae boundaries and maximum strain direction aligned with collagen bundle orientation. Although disc elastic structures were not directly observed, the strain patterns had a similar distribution to the previously reported elastic network. This study presents technical advances and is a basis for future X-ray microscopy, structural quantification and digital volume correlation strain analysis of soft tissue.

GEORG SCHMORL PRIZE OF THE GERMAN SPINE SOCIETY (DWG) 2018: combined inflammatory and mechanical stress weakens the annulus fibrosus: evidences from a loaded bovine AF organ culture

PURPOSE

The pathomechanism of annulus fibrosus (AF) failure is still unknown. We hypothesise that mechanical overload and an inflammatory microenvironment contribute to AF structural weakening. Therefore, the objective of this study was to investigate the influence of these factors on the AF, particularly the translamellar bridging network (TLBN) which connects the AF lamellae.

METHODS

A bovine AF organ culture (AF-OC) model of standardised AF rings was used to study the individual and combined effects of cyclic tensile strain (CTS) and IL-1β (1 ng/mL) culture medium supplementation. AF-OCs were analysed for PGE₂ production (ELISA) and deposition of IL-6, COX-2, fibrillin, and MMP3 in the tissue (immunohistochemistry, IHC). The mechanical strength of the TLBN was evaluated using a peel test to measure the strength required to separate an AF segment along a lamellar bound.

RESULTS

The combination of CTS + IL-1β led to a significant increase in PGE₂ production compared to Control (p < 0.01). IHC evaluations showed that the CTS + IL-1β group exhibited higher production of COX-2 and MMP3 within the TLBN regions compared to the adjacent lamellae and a significant increase in IL-6 ratio compared to Control (p < 0.05). A significant decrease in the annular peel strength was observed in the CTS + IL1β group compared to Control (p < 0.05).

CONCLUSION

Our findings suggest that CTS and IL-1β act synergistically to increase pro-inflammatory and catabolic molecules within the AF, particularly the TLBN, leading to a weakening of the tissue. This standardised model enables the investigation of AF/TLBN structure-function relationship and is a platform to test AF-focused therapeutics. These slides can be retrieved under Electronic Supplementary Material.

The Mechanical Role of the Radial Fiber Network Within the Annulus Fibrosus of the Lumbar Intervertebral Disc: A Finite Elements Study

The annulus fibrosus (AF) of the intervertebral disc (IVD) consists of a set of concentric layers composed of a primary circumferential collagen fibers arranged in an alternating oblique orientation. Moreover, there exists an additional secondary set of radial translamellar collagen fibers which connects the concentric layers, creating an interconnected fiber network. The aim of this study was to investigate the mechanical role of the radial fiber network. Toward that goal, a three-dimensional (3D) finite element model of the L3–L4 spinal segment was generated and calibrated to axial compression and pure moment loading. The AF model explicitly recognizes the two heterogeneous networks of fibers. The presence of radial fibers demonstrated a pronounced effect on the local disc responses under lateral bending, flexion, and extension modes. In these modes, the radial fibers were in a tensile state in the disc region that subjected to compression. In addition, the circumferential fibers, on the opposite side of the IVD, were also under tension. The local stress in the matrix was decreased in up to 9% in the radial fibers presence. This implies an active fiber network acting collectively to reduce the stresses and strains in the AF lamellae. Moreover, a reduction of 26.6% in the matrix sideways expansion was seen in the presence of the radial fibers near the neutral bending axis of the disc. The proposed biomechanical model provided a new insight into the mechanical role of the radial collagen fibers in the AF structure. This model can assist in the design of future IVD substitutes.

Three-dimensional microstructural reconstruction of the ovine intervertebral disc using ultrahigh field MRI

BACKGROUND

The intervertebral disc (IVD) is a complex organ that acts as a flexible coupling between two adjacent vertebral bodies and must therefore accommodate compression, bending, and torsion. It consists of three main components, which are elegantly structured to allow this: the annulus fibrosus (AF), the nucleus pulposus (NP), and the end-plates (EP).

PURPOSE

Thus far, it has not been possible to examine the microarchitecture of the disc directly in three dimensions in its unaltered state and thus knowledge of the overall architecture of the disc has been inferred from a range of imaging sources, or by using destructive methods.

STUDY DESIGN

A nondestructive ultrahigh field Magnetic Resonance Imaging (MRI) of 11.7 T was used together with image analysis to visualize the ovine IVDs.

METHODS

Three-dimensional image stacks from eight IVDs harvested from sheep, half of which were 4 to 5 years old and the others approximately 2 years old were reconstructed and examined, and their microstructure were imaged. The overall structure of the disc, including the average of 14 AF lamellae (9-28), NP, and EP was then visualized with particular attention given to integrating elements as radial translamellar cross-links, AF-NP transition zone EP-AF integration and EP-NP insertion nodes (ie the connecting junctions between the EP and NP). Moreover, collagen fiber orientation was determined at different depths and locations throughout the annulus.

RESULTS

It was found that there was a clearer demarcation in the AF-NP transition zone of the younger discs compared with the older ones. This difference was reflected in the visibility of AF-NP and EP-AF integration. It was also possible to view the fiber architecture of the AF-NP integration in greater depth than was possible previously with histological techniques. These fibers were mainly observed in the younger discs and their length was measured to be of 2.6 ± 0.2 mm.

CONCLUSIONS

The present results provide a substantial advance in visualization of the three-dimensional architecture of an intact IVD and the integration of its components.

New insights into the viscoelastic and failure mechanical properties of the elastic fiber network of the inter-lamellar matrix in the annulus fibrosus of the disc

The mechanical role of elastic fibers in the inter-lamellar matrix (ILM) is unknown; however, it has been suggested that they play a role in providing structural integrity to the annulus fibrosus (AF). Therefore, the aim of this study was to measure the viscoelastic and failure properties of the elastic fiber network in the ILM of ovine discs under both tension and shear directions of loading. Utilizing a technique, isolated elastic fibers within the ILM from ovine discs were stretched to 40% of their initial length at three strain rates of 0.1% s^-1 (slow), 1% s^-1 (medium) and 10% s^-1 (fast), followed by a ramp test to failure at 10% s^-1. A significant strain-rate dependent response was found, particularly at the fastest rate for phase angle and normalized stiffness (p < 0.001). The elastic fibers in the ILM demonstrated a significantly higher capability for energy absorption at slow compared to medium and fast strain rates (p < 0.001). These finding suggests that the elastic fiber network of the ILM exhibits nonlinear elastic behavior. When tested to failure, a significantly higher normalized failure force was found in tension compared to shear loading (p = 0.011), which is consistent with the orthotropic structure of elastic fibers in the ILM. The results of this study confirmed the mechanical contribution of the elastic fiber network to the ILM and the structural integrity of the AF. This research serves as a foundation for future studies to investigate the relationship between degeneration and ILM mechanical properties.

STATEMENT OF SIGNIFICANCE

The mechanical role of elastic fibres in the inter-lamellar matrix (ILM) of the disc is unknown. The viscoelastic and failure properties of the elastic fibre network in the ILM in both tension and shear directions of loading was measured for the first time. We found a strain-rate dependent response for the elastic fibres in the ILM. The elastic fibres in the ILM demonstrated a significantly higher capability for energy absorption at slow compared to medium and fast strain rates. When tested to failure, a significantly higher normalized failure force was found in tension compared to shear loading, which is consistent with the orthotropic structure of elastic fibres in the ILM.

New findings confirm the viscoelastic behaviour of the inter-lamellar matrix of the disc annulus fibrosus in radial and circumferential directions of loading

While few studies have improved our understanding of composition and organization of elastic fibres in the inter-lamellar matrix (ILM), its clinical relevance is not fully understood. Moreover, no studies have measured the direct tensile and shear failure and viscoelastic properties of the ILM. Therefore, the aim of this study was, for the first time, to measure the viscoelastic and failure properties of the ILM in both the tension and shear directions of loading. Using an ovine model, isolated ILM samples were stretched to 40% of their initial length at three strain rates of 0.1%s^-1 (slow), 1%s^-1 (medium) and 10%s^-1 (fast) and a ramp test to failure was performed at a strain rate of 10%s^-1. The findings from this study identified that the stiffness of the ILM was significantly larger at faster strain rates, and energy absorption significantly smaller, compared to slower strain rates, and the viscoelastic and failure properties were not significantly different under tension and shear loading. We found a strain rate dependent response of the ILM during dynamic loading, particularly at the fastest rate. The ILM demonstrated a significantly higher capability for energy absorption at slow strain rates compared to medium and fast strain rates. A significant increase in modulus was found in both loading directions and all strain rates, having a trend of larger modulus in tension and at faster strain rates. The finding of no significant difference in failure properties in both loading directions, was consistent with our previous ultra-structural studies that revealed a well-organized (±45°) elastic fibre orientation in the ILM. The results from this study can be used to develop and validate finite element models of the AF at the tissue scale, as well as providing new strategies for fabricating tissue engineered scaffolds.

STATEMENT OF SIGNIFICANCE

While few studies have improved our understanding of composition and organization of elastic fibres in the inter-lamellar matrix (ILM) of the annulus in the disc no studies have measured the direct mechanical failure and viscoelastic properties of the ILM. The findings from this study identified that the stiffness of the ILM was significantly larger at faster strain rates, and energy absorption significantly smaller, compared to slower strain rates. The failure properties of the ILM were not significantly different under tension and shear.

Ultrastructural organization of elastic fibres in the partition boundaries of the annulus fibrosus within the intervertebral disc

The relationship between elastic fibre disorders and disc degeneration, aging and progression of spine deformity have been discussed in a small number of studies. However, the clinical relevance of elastic fibres in the annulus fibrosus (AF) of the disc is poorly understood. Ultrastructural visualization of elastic fibres is an important step towards understanding their structure-function relationship. In our previous studies, a novel technique for visualization of elastic fibres across the AF was presented and their ultrastructural organization in intra- and inter-lamellar regions was compared. Using the same novel technique in the present study, the ultrastructural organization of elastic fibres in the partition boundaries (PBs), which are located between adjacent collagen bundles, is presented for the first time. Visualization of elastic fibres in the PBs in control and partially digested (digested) samples was compared, and their orientation in two different cutting planes (transverse and oblique) were discussed. The ultrastructural analysis revealed that elastic fibres in PBs were a well-organized dense and complex network having different size and shape. Adjacent collagen bundles in a cross section (CS) lamella appear to be connected to each other, where elastic fibres in the PBs were merged in parallel or penetrated into the collagen bundles. There was no significant difference in directional coherency coefficient of elastic fibres between the two different cutting planes (p = .35). The present study revealed that a continuous network of elastic fibres may provide disc integrity by connecting adjacent bundles of CS lamellae together. Compared to our previous studies, the density of the elastic fibre network in PBs was lower, and fibre orientation was similar to the intra-lamellar space and inter-lamellar matrix.

STATEMENT OF SIGNIFICANCE

A detailed ultrastructural study in the partition boundaries of the annulus fibrosus within the disc revealed a well-organized elastic fibre network with a complex ultrastructure. The continuous network of elastic fibres may provide disc integrity by connecting adjacent bundles of cross section lamellae together. The density of the elastic fibre network in PBs was lower, and fibre orientation was similar to the intra-lamellar space and the inter-lamellar matrix.

The ultra-structural organization of the elastic network in the intra- and inter-lamellar matrix of the intervertebral disc

The inter-lamellar matrix (ILM)-located between adjacent lamellae of the annulus fibrosus-consists of a complex structure of elastic fibers, while elastic fibers of the intra-lamellar region are aligned predominantly parallel to the collagen fibers. The organization of elastic fibers under low magnification, in both inter- and intra-lamellar regions, was studied by light microscopic analysis of histologically prepared samples; however, little is known about their ultrastructure. An ultrastructural visualization of elastic fibers in the inter-lamellar matrix is crucial for describing their contribution to structural integrity, as well as mechanical properties of the annulus fibrosus. The aims of this study were twofold: first, to present an ultrastructural analysis of the elastic fiber network in the ILM and intra-lamellar region, including cross section (CS) and in-plane (IP) lamellae, of the AF using Scanning Electron Microscopy (SEM) and second, to -compare the elastic fiber orientation between the ILM and intra-lamellar region. Four samples (lumbar sheep discs) from adjacent sections (30μm thickness) of anterior annulus were partially digested by a developed NaOH-sonication method for visualization of elastic fibers by SEM. Elastic fiber orientation and distribution were quantified relative to the tangential to circumferential reference axis. Visualization of the ILM under high magnification revealed a dense network of elastic fibers that has not been previously described. Within the ILM, elastic fibers form a complex network, consisting of different size and shape fibers, which differed to those located in the intra-lamellar region. For both regions, the majority of fibers were oriented near 0° with respect to tangential to circumferential (TCD) direction and two minor symmetrical orientations of approximately±45°. Statistically, the orientation of elastic fibers between the ILM and intra-lamellar region was not different (p=0.171). The present study used extracellular matrix partial digestion to address significant gaps in understanding of disc microstructure and will contribute to multidisciplinary ultrastructure-function studies.

STATEMENT OF SIGNIFICANCE

Visualization of the intra-lamellar matrix under high magnification revealed a dense network of elastic fibers that has not been previously described. The present study used extracellular matrix partial digestion to address significant gaps in understanding of disc microstructure and will contribute to multidisciplinary ultrastructure-function studies.

Biomaterials for intervertebral disc regeneration and repair

The intervertebral disc contributes to motion, weight bearing, and flexibility of the spine, but is susceptible to damage and morphological changes that contribute to pathology with age and injury. Engineering strategies that rely upon synthetic materials or composite implants that do not interface with the biological components of the disc have not met with widespread use or desirable outcomes in the treatment of intervertebral disc pathology. Here we review bioengineering advances to treat disc disorders, using cell-supplemented materials, or acellular, biologically based materials, that provide opportunity for cell-material interactions and remodeling in the treatment of intervertebral disc disorders. While a field still in early development, bioengineering-based strategies employing novel biomaterials are emerging as promising alternatives for clinical treatment of intervertebral disc disorders.

CD146 defines commitment of cultured annulus fibrosus cells to express a contractile phenotype

Characterization of cells is important for facilitating cell-based therapies for degenerative diseases of intervertebral discs. For this purpose, we analyzed mouse annulus fibrosus cells by flowcytometory to detect phenotypic change in their primary cultures. After examination of sixteen cell surface proteins, we focused on CD146 that solely increased during culture expansion. CD146 is known to be a marker for mesenchymal stem cells and for their vascular smooth muscle commitment with expression of contractile phenotype enhanced by SM22α. We sorted CD146+ cells to elucidate their characteristics and the key factors that play a role in this change. Whole cell cultures showed the ability for tripotent differentiation toward mesenchymal lineages, whereas sorted CD146+ cells did not. Expression of CD146 was elevated by addition of transforming growth factor β1, and sorted CD146+ cells expressed higher levels of mRNA for SM22α and Elastin than did CD146- cells. Morphologically, CD146+ cells more broadly deposited extracellular type I collagen than CD146- cells and showed filamentous actin bundles traversing their cytoplasm and cell-cell junctions. Moreover, CD146+ cells demonstrated significantly higher gel contraction properties than CD146- cells when they were embedded in collagen gels. Human annulus fibrosus CD146+ cells also showed higher contractility. Immunohistochemistry determined CD146+ cells localized to the outermost annulus layers of mouse intervertebral disc tissue with co-expression of SM22α. These results suggest that increment of CD146 expression indicates gradual change of cultured annulus fibrosus cells to express a contractile phenotype and that transforming growth factor β1 enhances this cellular commitment. © 2016 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 34:1361-1372, 2016.

Structure and mechanical function of the inter-lamellar matrix of the annulus fibrosus in the disc

The inter-lamellar matrix (ILM) has an average thickness of less than 30 µm and lies between adjacent lamellae in the annulus fibrosus (AF). The microstructure and composition of the ILM have been studied in various anatomic regions of the disc; however, their contribution to AF mechanical properties and structural integrity is unknown. It was suggested that the ILM components, mainly elastic fibers and cross-bridges, play a role in providing mechanical integrity of the AF. Therefore, the manner in which they respond to different loadings and stabilize adjacent lamellae structure will influence AF tear formation and subsequent herniation. This review paper summarizes the composition, microstructure, and potential role of the ILM in the progression of disc herniation, clarifies the micromechanical properties of the ILM, and proposes critical areas for future studies. There are a number of unknown characteristics of the ILM, such as its mechanical role, impact on AF integrity, and ultrastructure of elastic fibers at the ILM-lamella boundary. Determining these characteristics will provide important information for tissue engineering, repair strategies, and the development of more-physiological computational models to study the initiation and propagation of AF tears that lead to herniation and degeneration. © 2016 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 34:1307-1315, 2016.

Lamellar and fibre bundle mechanics of the annulus fibrosus in bovine intervertebral disc

The intervertebral disc is a multicomposite structure, with an outer fibrous ring, the annulus fibrosus, retaining a gel-like core, the nucleus pulposus. The disc presents complex mechanical behaviour, and it is of high importance for spine biomechanics. Advances in multiscale modelling and disc repair raised a need for new quantitative data on the finest details of annulus fibrosus mechanics. In this work we explored inter-lamella and inter-bundle behaviour of the outer annulus using micromechanical testing and second harmonic generation microscopy. Twenty-one intervertebral discs were dissected from cow tails; the nucleus and inner annulus were excised to leave a ring of outer annulus, which was tested in circumferential loading while imaging the tissue's collagen fibres network with sub-micron resolution. Custom software was developed to determine local tissue strains through image analysis. Inter-bundle linear and shear strains were 5.5 and 2.8 times higher than intra-bundle strains. Bundles tended to remain parallel while rotating under loading, with large slipping between them. Inter-lamella linear strain was almost 3 times the intra-lamella one, but no slipping was observed at the junction between lamellae. This study confirms that outer annulus straining is mainly due to bundles slipping and rotating. Further development of disc multiscale modelling and repair techniques should take into account this modular behaviour of the lamella, rather than considering it as a homogeneous fibre-reinforced matrix.

STATEMENT OF SIGNIFICANCE

The intervertebral disc is an organ tucked between each couple of vertebrae in the spine. It is composed by an outer fibrous layer retaining a gel-like core. This organ undergoes severe and repeated loading during everyday life activities, since it is the compliant component that gives the spine its flexibility. Its properties are affected by pathologies such as disc degeneration, a major cause of back pain. In this article we explored the micromechanical behaviour of the disc's outer layer using second harmonic generation, a technique which allowed us to visualize, with unprecedented detail, how bundles of collagen fibres slide relative to each other when loaded. Our results will help further the development of new multiscale numerical models and repairing techniques.

Qualitative and quantitative assessment of collagen and elastin in annulus fibrosus of the physiologic and scoliotic intervertebral discs

The biophysical properties of the annulus fibrosus of the intervertebral disc are determined by collagen and elastin fibres. The progression of scoliosis is accompanied by a number of pathological changes concerning these structural proteins. This is a major cause of dysfunction of the intervertebral disc. The object of the study were annulus fibrosus samples excised from intervertebral discs of healthy subjects and patients treated surgically for scoliosis in the thoracolumbar or lumbar spine. The research material was subjected to structural analysis by light microscopy and quantitative analysis of the content of collagen types I, II, III and IV as well as elastin by immunoenzymatic test (ELISA). A statistical analysis was conducted to assess the impact of the sampling site (Mann-Whitney test, α=0.05) and scoliosis (Wilcoxon matched pairs test, α=0.05) on the obtained results. The microscopic studies conducted on scoliotic annulus fibrosus showed a significant architectural distortion of collagen and elastin fibres. Quantitative biochemical assays demonstrated region-dependent distribution of only collagen types I and II in the case of healthy intervertebral discs whereas in the case of scoliotic discs region-dependent distribution concerned all examined proteins of the extracellular matrix. Comparison of scoliotic and healthy annulus fibrosus revealed a significant decrease in the content of collagen type I and elastin as well as a slight increase in the proportion of collagen types III and IV. The content of collagen type II did not differ significantly between both groups. The observed anomalies are a manifestation of degenerative changes affecting annulus fibrosus of the intervertebral disc in patients suffering from scoliosis.

Inflammation in intervertebral disc degeneration and regeneration

Intervertebral disc (IVD) degeneration is one of the major causes of low back pain, a problem with a heavy economic burden, which has been increasing in prevalence as populations age. Deeper knowledge of the complex spatial and temporal orchestration of cellular interactions and extracellular matrix remodelling is critical to improve current IVD therapies, which have so far proved unsatisfactory. Inflammation has been correlated with degenerative disc disease but its role in discogenic pain and hernia regression remains controversial. The inflammatory response may be involved in the onset of disease, but it is also crucial in maintaining tissue homeostasis. Furthermore, if properly balanced it may contribute to tissue repair/regeneration as has already been demonstrated in other tissues. In this review, we focus on how inflammation has been associated with IVD degeneration by describing observational and in vitro studies as well as in vivo animal models. Finally, we provide an overview of IVD regenerative therapies that target key inflammatory players.

ISSLS Prize Winner: A Detailed Examination of the Elastic Network Leads to a New Understanding of Annulus Fibrosus Organization

STUDY DESIGN

Investigation of the elastic network in disc annulus and its function.

OBJECTIVE

To investigate the involvement of the elastic network in the structural interconnectivity of the annulus and to examine its possible mechanical role.

SUMMARY OF BACKGROUND DATA

The lamellae of the disc are now known to consist of bundles of collagen fibers organized into compartments. There is strong interconnectivity between adjacent compartments and between adjacent lamellae, possibly aided by a translamellar bridging network, containing blood vessels. An elastic network exists across the disc annulus and is particularly dense between the lamellae, and forms crossing bridges within the lamellae.

METHODS

Blocks of annulus taken from bovine caudal discs were studied in either their unloaded or radially stretched state then fixed and sectioned, and their structure analyzed optically using immunohistology.

RESULTS

An elastic network enclosed the collagen compartments, connecting the compartments with each other and with the elastic network of adjacent lamellae, formed an integrated network across the annulus, linking it together. Stretching experiments demonstrated the mechanical interconnectivities of the elastic fibers and the collagen compartments.

CONCLUSION

The annulus can be viewed as a modular structure organized into compartments of collagen bundles enclosed by an elastic sheath. The elastic network of these sheaths is interconnected mechanically across the entire annulus. This organization is also seen in the modular structure of tendon and muscle. The results provide a new understanding annulus structure and its interconnectivity, and contribute to fundamental structural information relevant to disc tissue engineering and mechanical modeling.

LEVEL OF EVIDENCE

N/A.

Scaffolds and tissue regeneration: An overview of the functional properties of selected organic tissues

Tissue engineering plays a significant role both in the re-establishment of functions and regeneration of organic tissues. Success in manufacturing projects for biological scaffolds, for the purpose of tissue regeneration, is conditioned by the selection of parameters such as the biomaterial, the device architecture, and the specificities of the cells making up the organic tissue to create, in vivo, a microenvironment that preserves and further enhances the proliferation of a specific cell phenotype. To support this approach, we have screened scientific publications that show biomedical applications of scaffolds, biomechanical, morphological, biochemical, and hemodynamic characteristics of the target organic tissues, and the possible interactions between different cell matrices and biological scaffolds. This review article provides an overview on the biomedical application of scaffolds and on the characteristics of the (bio)materials commonly used for manufacturing these biological devices used in tissue engineering, taking into consideration the cellular specificity of the target tissue. © 2015 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 104B: 1483-1494, 2016.

Mechanistic insights into elastin degradation by pseudolysin, the major virulence factor of the opportunistic pathogen Pseudomonas aeruginosa

Pseudolysin is the most abundant protease secreted by Pseudomonas aeruginosa and is the major extracellular virulence factor of this opportunistic human pathogen. Pseudolysin destroys human tissues by solubilizing elastin. However, the mechanisms by which pseudolysin binds to and degrades elastin remain elusive. In this study, we investigated the mechanism of action of pseudolysin on elastin binding and degradation by biochemical assay, microscopy and site-directed mutagenesis. Pseudolysin bound to bovine elastin fibers and preferred to attack peptide bonds with hydrophobic residues at the P1 and P1’ positions in the hydrophobic domains of elastin. The time-course degradation processes of both bovine elastin fibers and cross-linked human tropoelastin by pseudolysin were further investigated by microscopy. Altogether, the results indicate that elastin degradation by pseudolysin began with the hydrophobic domains on the fiber surface, followed by the progressive disassembly of macroscopic elastin fibers into primary structural elements. Moreover, our site-directed mutational results indicate that five hydrophobic residues in the S1-S1’ sub-sites played key roles in the binding of pseudolysin to elastin. This study sheds lights on the pathogenesis of P. aeruginosa infection.

Derivation of inter-lamellar behaviour of the intervertebral disc annulus

The inter-lamellar connectivity of the annulus fibrosus in the intervertebral disc has been shown to affect the prediction of the overall disc behaviour in computational models. Using a combined experimental and computational approach, the inter-lamellar mechanical behaviour of the disc annulus was investigated under conditions of radial loading.

Twenty-seven specimens of anterior annulus fibrosus were dissected from 12 discs taken from four frozen ovine thoracolumbar spines. Specimens were grouped depending on their radial provenance within the annulus fibrosus. Standard tensile tests were performed. In addition, micro-tensile tests under microscopy were used to observe the displacement of the lamellae and inter-lamellar connections. Finite elements models matching the experimental protocols were developed with specimen-specific geometries and boundary conditions assuming a known lamellar behaviour. An optimisation process was used to derive the interface stiffness values for each group. The assumption of a linear cohesive interface was used to model the behaviour of the inter-lamellar connectivity.

The interface stiffness values derived from the optimisation process were consistently higher than the corresponding lamellar values. The interface stiffness values of the outer annulus were from 43% to 75% higher than those of the inner annulus. Tangential stiffness values for the interface were from 6% to 39% higher than normal stiffness values within each group and similar to values reported by other investigators. These results reflect the intricate fibrous nature of the inter-lamellar connectivity and provide values for the representation of the inter-lamellar behaviour at a continuum level.

Three dimensional mesoscale analysis of translamellar cross-bridge morphologies in the annulus fibrosus using optical coherence tomography

The defining characteristic of the annulus fibrosus (AF) of the intervertebral disc (IVD) has long been the lamellar structures that consist of highly ordered collagen fibers arranged in alternating oblique angles from one layer to the next. However, a series of recent histologic studies have demonstrated that AF lamellae contain elastin- and type VI collagen-rich secondary "cross-bridge" structures across lamellae. In this study, we use optical coherence tomography (OCT) to elucidate the three-dimensional (3-D) morphologies of these translamellar cross-bridges in AF tissues. Mesoscale volumetric images by OCT revealed a 3-D network of heterogeneously distributed cross-bridges. The results of this study confirm the translamellar cross-bridge is identifiable as a distinguishable structure, which lies in the interbundle space of adjacent lamellae and crisscrosses multiple lamellae in the radial direction. In contrast to previously proposed models extrapolated from 2-D sections, results from this current study show that translamellar cross-bridges exist as a complex, interconnected network. We also found much greater variation in lengths of cross-bridges within the interbundle space of lamellae (0.8-1.4 mm from the current study versus 0.3-0.6 mm from 2-D sections). OCT-based 3-D morphology of translamellar cross-bridge provides novel insight into the AF structure.

Role of biomolecules on annulus fibrosus micromechanics: effect of enzymatic digestion on elastic and failure properties

Uniaxial tension was applied to selectively digested single lamellar human cadaveric annulus fibrosus specimens to investigate the role of different biomolecules in annular biomechanics. Single layered and inter-lamellar annulus fibrosus samples were obtained from 10 isolated cadaveric lumbar intervertebral discs in one of four orientations: longitudinal, transverse, radial, and circumferential. Within each orientation the samples were subjected to a selective enzymatic digestion protocol with collagenase, elastase, chondroitinase ABC, or 1× Phosphate Buffered Saline. Uniaxial tensile tests were performed to failure at a strain rate of 0.005s(-1). Failure stress and strain, and elastic moduli were compared among the digested conditions. The collagenase- and elastase-treated groups had the most significant effect on the mechanical properties among the orientation groups, decreasing the failure stress for both interlaminar and intralaminar groups. Collagenase-treated groups showed an increase in the failure strain following enzymatic digestion for the intralaminar groups and one interlaminar testing direction (circumferential). The chondroitinase ABC-treated group only had a significant impact on the single layer orientations, decreasing the failure stress and strain (intralaminar group). The digested properties described provide insights into the laminar mechanical behavior and the role of the molecular components to the annular mechanical behavior. Understanding annular mechanics may prove insightful in diagnosis, prevention and repair of debilitating intervertebral disc disorders and manufacturing of tissue-engineered annulus.