Optimization of electroporation conditions for Mycobacterium avium

Design and Characterization of a Recombinant Brucella abortus RB51 Vaccine That Elicits Enhanced T Cell-Mediated Immune Response

Brucella abortus vaccines help control bovine brucellosis. The RB51 strain is a live attenuated vaccine with low side effects compared with other live attenuated brucellosis vaccines, but it provides insufficient protective efficacy. Cell-mediated immune responses are critical in resistance against intracellular bacterial infections. Therefore, we hypothesized that the listeriolysin O (LLO) expression of Listeria monocytogenes, BAX, and SMAC apoptotic proteins in strain RB51 could enhance vaccine efficacy and safety. B. abortus RB51 was transformed separately with two broad-host-range plasmids (pbbr1ori-LLO and pBlu–mLLO-BAX-SMAC) constructed from our recent work. pbbr1ori-LLO contains LLO, and pBlu–mLLO-BAX-SMAC contains the mutant LLO and BAX-SMAC fusion gene. The murine macrophage-like cell line J774A.1 was infected with the RB51 recombinant strain containing pBlu-mLLO-BAX-SMAC, RB51 recombinant strain containing LLO, and RB51 strain. The bacterial cytotoxicity and survival and apoptosis of host cells contaminated with our two strain types—RB51 recombinants or the parental RB51—were assessed. Strain RB51 expressing mLLO and BAX-SMAC was tested in BALB/c mice and a cell line for enhanced modulation of IFN-γ production. LDH analysis showed that the RB51-mLLO-BAX-SMAC and RB51-LLO strains expressed higher cytotoxicity in J774A.1 cells than RB51. In addition, RB51 recombinants had lower macrophage survival rates and caused higher levels of apoptosis and necrosis. Mice vaccinated with the RB51 recombinant containing mLLO-BAX-SMAC showed an enhanced Th1 immune response. This enhanced immune response is primarily due to bacterial endosome escape and bacterial antigens, leading to improved apoptosis and cross-priming. This potentially enhanced TCD₈⁺- and T cell-mediated immunity leads to the increased safety and potency of the RB51 recombinant (RB51 mLLO-BAX-SMAC) as a vaccine candidate against B. abortus.

Construction of Novel Live Genetically Modified BCG Vaccine Candidates Using Recombineering Tools

One of the strategies for the construction of live vaccine candidates is through the generation of genetically defined isogenic strains, containing single or multiple mutations in target-specific genes generated by allelic exchange. This approach allows to produce rational attenuation of or, alternatively, sequence-specific modifications to produce variants of antigenic molecules or change their expression levels. Genetic tools amenable for their use in mycobacterial strains have allowed the identification and validation of potential targets for the diagnosis, prevention, and treatment of tuberculosis. However, the genetic manipulation of Mycobacterium tuberculosis and other slow-growing strains such as Mycobacterium bovis BCG has been delayed by various factors related to their physiology and cell wall characteristics. Notwithstanding the foregoing, the high frequency of illegitimate recombination and the availability of few antibiotic selection markers limit the feasibility of genetic manipulation of mycobacterial strains. This chapter describes a protocol for the generation of defined mutants using recombination tools in an inducible recombination system driven by mycobacterial Che9c phage RecET proteins, originally developed in Dr. Graham Hatfull's group, combined with linearized recombination substrates containing flanking sequences of a locus of interest and an antibiotic resistance gene. These recombination substrates contain sites for removal of antibiotics selection markers. This system allows to make marked and unmarked mutations by homologous recombination in a single step as a result of a double crossover between the homologous regions on the genome and the allelic exchange substrate. In addition, this genetic tool used for engineering mycobacterial genomes performs with lower rates of illegitimate recombination and take on average less time to create knock-out (KO) mutant compared with other techniques.

Easily applicable modifications to electroporation conditions improve the transformation efficiency rates for rough morphotypes of fast-growing mycobacteria

Electroporation is the most widely used and efficient method to transform mycobacteria. Through this technique, fast- and slow-growing mycobacteria with smooth and rough morphotypes have been successfully transformed. However, transformation efficiencies differ widely between species and strains. In this study, the smooth and rough morphotypes of Mycobacteroides abscessus and Mycolicibacterium brumae were used to improve current electroporation procedures for fast-growing rough mycobacteria. The focus was on minimizing three well-known and challenging limitations: the mycobacterial restriction-modification systems, which degrade foreign DNA; clump formation of electrocompetent cells before electroporation; and electrical discharges during pulse delivery, which were reduced by using salt-free DNA solution. Herein, different strategies are presented that successfully address these three limitations and clearly improve the electroporation efficiencies over the current procedures. The results demonstrated that combining the developed strategies during electroporation is highly recommended for the transformation of fast-growing rough mycobacteria.

Genetic Manipulation of Non-tuberculosis Mycobacteria

Non-tuberculosis mycobacteria (NTMs) comprise a large group of organisms that are phenotypically diverse. Analysis of the growing number of completed NTM genomes has revealed both significant intra-genus genetic diversity, and a high percentage of predicted genes that appear to be unique to this group. Most NTMs have not been studied, however, the rise in NTM infections in several countries has prompted increasing interest in these organisms. Mycobacterial research has recently benefitted from the development of new genetic tools and a growing number of studies describing the genetic manipulation of NTMs have now been reported. In this review, we discuss the use of both site-specific and random mutagenesis tools in NTMs, highlighting the challenges that exist in applying these techniques to this diverse group of organisms.

Electroporation of Mycobacteria

The introduction of DNA into bacterial cells is one of the foundational methods of bacterial genetics. Transformation of mycobacterial species is complicated due to the structure of the cell wall, which has a complex outer layer with low permeability. Electroporation has become a routine procedure in genetic studies. In this process, cells are subjected to a brief high-voltage electrical impulse which allows the entry of DNA. It can be used to introduce plasmid DNA, phage DNA, or oligonucleotides. This chapter presents methods for introducing DNA into a representative slow-growing species, M. tuberculosis, and a representative fast-growing species, M. smegmatis. Other mycobacteria can be transformed using variations of these methods, although the efficiency of transformation will vary.

Global Assessment of Mycobacterium avium subsp. hominissuis Genetic Requirement for Growth and Virulence

Nontuberculous mycobacterial infections caused by the opportunistic pathogen Mycobacterium avium subsp. hominissuis (MAH) are currently receiving renewed attention due to increased incidence combined with difficult treatment. Insights into the disease-causing mechanisms of this species have been hampered by difficulties in genetic manipulation of the bacteria. Here, we identified and sequenced a highly transformable, virulent MAH clinical isolate susceptible to high-density transposon mutagenesis, facilitating global gene disruption and subsequent investigation of MAH gene function. By transposon insertion sequencing (TnSeq) of this strain, we defined the MAH genome-wide genetic requirement for virulence and in vitro growth and organized ∼3,500 identified transposon mutants for hypothesis-driven research. The majority (96%) of the genes we identified as essential for MAH in vitro had a mutual ortholog in the related and highly virulent Mycobacterium tuberculosis (Mtb). However, passaging our library through a mouse model of infection revealed a substantial number (54% of total hits) of novel virulence genes. More than 97% of the MAH virulence genes had a mutual ortholog in Mtb Finally, we validated novel genes required for successful MAH infection: one encoding a probable major facilitator superfamily (MFS) transporter and another encoding a hypothetical protein located in the immediate vicinity of six other identified virulence genes. In summary, we provide new, fundamental insights into the underlying genetic requirement of MAH for growth and host infection.IMPORTANCE Pulmonary disease caused by nontuberculous mycobacteria is increasing worldwide. The majority of these infections are caused by the Mycobacterium avium complex (MAC), whereof >90% are due to Mycobacterium avium subsp. hominissuis (MAH). Treatment of MAH infections is currently difficult, with a combination of antibiotics given for at least 12 months. To control MAH by improved therapy, prevention, and diagnostics, we need to understand the underlying mechanisms of infection. Here, we provide crucial insights into MAH's global genetic requirements for growth and infection. We find that the vast majority of genes required for MAH growth and virulence (96% and 97%, respectively) have mutual orthologs in the tuberculosis-causing pathogen M. tuberculosis (Mtb). However, we also find growth and virulence genes specific to MAC species. Finally, we validate novel mycobacterial virulence factors that might serve as future drug targets for MAH-specific treatment or translate to broader treatment of related mycobacterial diseases.

A guide to Mycobacterium mutagenesis

The genus Mycobacterium includes several pathogens that cause severe disease in humans, like Mycobacterium tuberculosis (M. tb), the infectious agent causing tuberculosis. Genetic tools to engineer mycobacterial genomes, in a targeted or random fashion, have provided opportunities to investigate M. tb infection and pathogenesis. Furthermore, they have allowed the identification and validation of potential targets for the diagnosis, prevention, and treatment of tuberculosis. This review describes the various methods that are available for the generation of mutants in Mycobacterium species, focusing specifically on tools for altering slow-growing mycobacteria from the M. tb complex. Among others, it incorporates the recent new molecular biological technologies (e.g. ORBIT) to rapidly and/or genome-wide comprehensively obtain targeted mutants in mycobacteria. As such, this review can be used as a guide to select the appropriate genetic tools to generate mycobacterial mutants of interest, which can be used as tools to aid understanding of M. tb infection or to help developing TB intervention strategies.

Optimization and Comparison of Different Methods and Factors for Efficient Transformation of Brucella abortus RB51strain

Background:

The development of protective vaccines for Brucella spp. has been hampered by the difficulty in transformation of Brucella cells with foreign DNA for genetic manipulation. It seems that the formation of Brucella spheroplasts would increase the efficiency of transformation. The aim of this study was to devise an efficient method for the transformation of Brucella spp.

Materials and Methods:

At first, spheroplast of Brucella was prepared by glycine and ampicillin induction and transformed using optimized protocols of CaCl₂, electroporation, and lipofection methods. Then, the efficacy of transformation was compared between the three-mentioned methods.

Results:

Ampicillin-induced spheroplasts from early-log phase culture of brucella when incubated in a medium-containing 0.2 M sucrose during cell recovery had higher transformation efficiency in three different methods. Comparison of the transformation efficiency of Brucella abortus RB51 using the CaCl₂, lipofection, and electroporation methods revealed that the transformation efficiency with the lipofection method was significantly higher than with other two methods (P < 0.05).

Conclusions:

Lipofection method by lipofectamine 2000 on ampicillin-induced spheroplasts can be a suitable approach for Brucella transformation.

Electroporation of mycobacteria

High-efficiency transformation of DNA is integral to the study of mycobacteria, allowing genetic manipulation. Electroporation is the most widely used method for introducing DNA into mycobacterial strains. Many parameters contribute to high-efficiency transformation; these include the species per strain, the transforming DNA, the selectable marker, the growth medium additives, and the conditions of electroporation. In this chapter we provide an optimized method for the transformation of representative slow- and fast-growing species of mycobacteria-Mycobacterium tuberculosis and M. smegmatis, respectively.

Potent antimycobacterial activity of the pyridoxal isonicotinoyl hydrazone analog 2-pyridylcarboxaldehyde isonicotinoyl hydrazone: a lipophilic transport vehicle for isonicotinic acid hydrazide

The rise in drug-resistant strains of Mycobacterium tuberculosis is a major threat to human health and highlights the need for new therapeutic strategies. In this study, we have assessed whether high-affinity iron chelators of the pyridoxal isonicotinoyl hydrazone (PIH) class can restrict the growth of clinically significant mycobacteria. Screening a library of PIH derivatives revealed that one compound, namely, 2-pyridylcarboxaldehyde isonicotinoyl hydrazone (PCIH), exhibited nanomolar in vitro activity against Mycobacterium bovis bacille Calmette-Guérin and virulent M. tuberculosis. Interestingly, PCIH is derived from the condensation of 2-pyridylcarboxaldehyde with the first-line antituberculosis drug isoniazid [i.e., isonicotinic acid hydrazide (INH)]. PCIH displayed minimal host cell toxicity and was effective at inhibiting growth of M. tuberculosis within cultured macrophages and also in vivo in mice. Further, PCIH restricted mycobacterial growth at high bacterial loads in culture, a property not observed with INH, which shares the isonicotinoyl hydrazide moiety with PCIH. When tested against Mycobacterium avium, PCIH was more effective than INH at inhibiting bacterial growth in broth culture and in macrophages, and also reduced bacterial loads in vivo. Complexation of PCIH with iron decreased its effectiveness, suggesting that iron chelation may play some role in its antimycobacterial efficacy. However, this could not totally account for its potent efficacy, and structure-activity relationship studies suggest that PCIH acts as a lipophilic vehicle for the transport of its intact INH moiety into the mammalian cell and the mycobacterium. These results demonstrate that iron-chelating agents such as PCIH may be of benefit in the treatment and control of mycobacterial infection.

Reversible lipid accumulation and associated division arrest of Mycobacterium avium in lipoprotein-induced foamy macrophages may resemble key events during latency and reactivation of tuberculosis

During the dormant phase of tuberculosis, Mycobacterium tuberculosis persists in lung granulomas by residing in foamy macrophages (FM) that contain abundant lipid bodies (LB) in their cytoplasm, allowing bacilli to accumulate lipids as intracytoplasmic lipid inclusions (ILI). An experimental model of FM is presented where bone marrow-derived mouse macrophages are infected with M. avium and exposed to very-low-density lipoprotein (VLDL) as a lipid source. Quantitative analysis of detailed electron microscope observations showed the following results. (i) Macrophages became foamy, and mycobacteria formed ILI, for which host triacylglycerides, rather than cholesterol, was essential. (ii) Lipid transfer occurred via mycobacterium-induced fusion between LB and phagosomes. (iii) Mycobacteria showed a thinned cell wall and became elongated but did not divide. (iv) Upon removal of VLDL, LB and ILI declined within hours, and simultaneous resumption of mycobacterial division restored the number of mycobacteria to the same level as that found in untreated control macrophages. This showed that the presence of ILI resulted in a reversible block of division without causing a change in the mycobacterial replication rate. Fluctuation between ILI either partially or fully extending throughout the mycobacterial cytoplasm was suggestive of bacterial cell cycle events. We propose that VLDL-driven FM constitute a well-defined cellular system in which to study changed metabolic states of intracellular mycobacteria that may relate to persistence and reactivation of tuberculosis.

Development of an electrotransformation protocol for genetic manipulation of Clostridium pasteurianum

BACKGROUND

Reducing the production cost of, and increasing revenues from, industrial biofuels will greatly facilitate their proliferation and co-integration with fossil fuels. The cost of feedstock is the largest cost in most fermentation bioprocesses and therefore represents an important target for cost reduction. Meanwhile, the biorefinery concept advocates revenue growth through complete utilization of by-products generated during biofuel production. Taken together, the production of biofuels from low-cost crude glycerol, available in oversupply as a by-product of bioethanol production, in the form of thin stillage, and biodiesel production, embodies a remarkable opportunity to advance affordable biofuel development. However, few bacterial species possess the natural capacity to convert glycerol as a sole source of carbon and energy into value-added bioproducts. Of particular interest is the anaerobe Clostridium pasteurianum, the only microorganism known to convert glycerol alone directly into butanol, which currently holds immense promise as a high-energy biofuel and bulk chemical. Unfortunately, genetic and metabolic engineering of C. pasteurianum has been fundamentally impeded due to lack of an efficient method for deoxyribonucleic acid (DNA) transfer.

RESULTS

This work reports the development of an electrotransformation protocol permitting high-level DNA transfer to C. pasteurianum ATCC 6013 together with accompanying selection markers and vector components. The CpaAI restriction-modification system was found to be a major barrier to DNA delivery into C. pasteurianum which we overcame by in vivo methylation of the recognition site (5'-CGCG-3') using the M.FnuDII methyltransferase. With proper selection of the replication origin and antibiotic-resistance marker, we initially electroporated methylated DNA into C. pasteurianum at a low efficiency of 2.4 × 101 transformants μg-1 DNA by utilizing conditions common to other clostridial electroporations. Systematic investigation of various parameters involved in the cell growth, washing and pulse delivery, and outgrowth phases of the electrotransformation procedure significantly elevated the electrotransformation efficiency, up to 7.5 × 104 transformants μg-1 DNA, an increase of approximately three order of magnitude. Key factors affecting the electrotransformation efficiency include cell-wall-weakening using glycine, ethanol-mediated membrane solubilization, field strength of the electric pulse, and sucrose osmoprotection.

CONCLUSIONS

C. pasteurianum ATCC 6013 can be electrotransformed at a high efficiency using appropriately methylated plasmid DNA. The electrotransformation method and tools reported here should promote extensive genetic manipulation and metabolic engineering of this biotechnologically important bacterium.

Illegitimate recombination: an efficient method for random mutagenesis in Mycobacterium avium subsp. hominissuis

Background

The genus Mycobacterium (M.) comprises highly pathogenic bacteria such as M. tuberculosis as well as environmental opportunistic bacteria called non-tuberculous mycobacteria (NTM). While the incidence of tuberculosis is declining in the developed world, infection rates by NTM are increasing. NTM are ubiquitous and have been isolated from soil, natural water sources, tap water, biofilms, aerosols, dust and sawdust. Lung infections as well as lymphadenitis are most often caused by M. avium subsp. hominissuis (MAH), which is considered to be among the clinically most important NTM. Only few virulence genes from M. avium have been defined among other things due to difficulties in generating M. avium mutants. More efforts in developing new methods for mutagenesis of M. avium and identification of virulence-associated genes are therefore needed.

Results

We developed a random mutagenesis method based on illegitimate recombination and integration of a Hygromycin-resistance marker. Screening for mutations possibly affecting virulence was performed by monitoring of pH resistance, colony morphology, cytokine induction in infected macrophages and intracellular persistence. Out of 50 randomly chosen Hygromycin-resistant colonies, four revealed to be affected in virulence-related traits. The mutated genes were MAV_4334 (nitroreductase family protein), MAV_5106 (phosphoenolpyruvate carboxykinase), MAV_1778 (GTP-binding protein LepA) and MAV_3128 (lysyl-tRNA synthetase LysS).

Conclusions

We established a random mutagenesis method for MAH that can be easily carried out and combined it with a set of phenotypic screening methods for the identification of virulence-associated mutants. By this method, four new MAH genes were identified that may be involved in virulence.

Optimization of electroporation conditions for Arthrobacter with plasmid PART2

A prerequisite for genetic studies of Arthrobacter is a high efficiency transformation system that allows for DNA transfer, transposon mutagenesis, and expression of specific genes. In this study, we develop a detailed electroporation method through a systematic examination of the factors involved in the entire electroporation process. Key features of this procedure, including the addition of penicillin to cells during the early log phase of growth and the presence of 0.5M sorbitol in the electroporation and recovery media, produced the greatest increases in transformation efficiency and consistency of results. The transformation rate also varied depending on the electrical parameters, DNA concentration, and recovery time period. Using optimum conditions, we generally achieved an efficiency of 6.8 × 10(7) transformants per microgram of PART2 for Arthrobacter sp. A3. This protocol was also successfully applied to other Arthrobacter species. Therefore, we conclude that the proposed method is rapid, simple and convenient, which allows a transformation trial to be accomplished in minutes.

Electroporation of mycobacteria

High-efficiency transformation is a major limitation in the study of mycobacteria. The genus Mycobacterium can be difficult to transform; this is mainly caused by the thick and waxy cell wall but is compounded by the fact that most molecular techniques have been developed for distantly related species such as Escherichia coli and Bacillus subtilis. In spite of these obstacles, mycobacterial plasmids have been identified, and DNA transformation of many mycobacterial species has now been described. The most successful method for introducing DNA into mycobacteria is electroporation. Many parameters contribute to successful transformation; these include the species/strain, the nature of the transforming DNA, the selectable marker used, the growth medium, and the conditions for the electroporation pulse. Optimized methods for the transformation of both slow-grower and fast-grower are detailed here. Transformation efficiencies for different mycobacterial species and with various selectable markers are reported.

Elaboration of an electroporation protocol for Bacillus cereus ATCC 14579

An electro-transformation procedure was established for Bacillus cereus ATCC 14579. Using early growth-stage culture and high electric field, the ectroporation efficiency was up to 2 x 10(9) cfu microg(-1) ml(-1) with pC194 plasmid DNA. The procedure was tested with three other plasmids, of various sizes, replication mechanisms and selection markers, and the transformation efficiencies ranged between 2 x 10(6) and 1 x 10(8) cfu microg(-1) ml(-)(1). The effects of two wall-weakening agents on electroporation rates were also evaluated. The transformation rate that was reached with our procedure is 10(3) times higher than that previously obtained with members of the Bacillus genus with similar plasmids, and 10(6) times superior than that achieved with available protocols for B. cereus. The proposed method is quick, simple, efficient with small rolling circle plasmids and large theta replicating plasmids with low copy number per cell, and suitable for many genetic manipulations that are not possible without high-efficiency transformation protocols.

Proposal of a method for the genetic transformation of Gordonia jacobaea

AIMS

Gordonia jacobaea is a recently isolated bacterial species with potential industrial application on account of its ability to store large quantities of trans-canthaxanthin. Its genetic manipulation is, however, difficult and cumbersome owing to the presence of mycolic acids in the cell wall and, especially, because of current lack of knowledge about its basic genetics. The present work describes a method for the genetic transformation of G. jacobaea.

METHODS AND RESULTS

Gordonia jacobaea was grown in media supplemented with different glycine, penicillin G and isoniazid concentrations. The temperature, carbon source, growth phase and ultrasounds were analyzed for improving the method efficiency. The cells were finally transformed by electroporation. Finally, the method was applied to Brevibacteriumlactofermentum and Gordonia bronchialis.

CONCLUSIONS

The growth of G. jacobaea in the presence of glycine and isoniazid is essential for obtaining electrocompetents cells. The temperature, growth phase and ultrasounds appeared as the main factors for increasing the transformation efficiency. The use of shuttle plasmids became necessary. The method described can be used with other Corynebacteria species.

SIGNIFICANCE AND IMPACT OF THE STUDY

Because of the importance of the CNM group (Corynebacteria, Nocardia and Mycobacteria genera) in different areas such as industry, bioremediation improve the knowledge of their molecular mechanisms are becoming essential. The method described here improves the genetic manipulation of this group of bacteria.

Genes required for intrinsic multidrug resistance in Mycobacterium avium

Genes required for intrinsic multidrug resistance by Mycobacterium avium were identified by screening a library of transposon insertion mutants for the inability to grow in the presence of ciprofloxacin, clarithromycin, and penicillin at subinhibitory concentrations. Two genes, pks12 and Maa2520, were disrupted in multiple drug-susceptible mutants. The pks12 gene (Maa1979), which may be cotranscribed with a downstream gene (Maa1980), is widely conserved in the actinomycetes. Its ortholog in Mycobacterium tuberculosis is a polyketide synthase required for the synthesis of dimycocerosyl phthiocerol, a major cell wall lipid. Mutants of M. avium with insertions into pks12 exhibited altered colony morphology and were drug susceptible, but they grew as well as the wild type did in vitro and intracellularly within THP-1 cells. A pks12 mutant of M. tuberculosis was moderately more susceptible to clarithromycin than was its parent strain; however, susceptibility to ciprofloxacin and penicillin was not altered. M. avium complex (MAC) and M. tuberculosis appear to have different genetic mechanisms for resisting the effects of these antibiotics, with pks12 playing a relatively more significant role in MAC. The second genetic locus identified in this study, Maa2520, is a conserved hypothetical gene with orthologs in M. tuberculosis and Mycobacterium leprae. It is immediately upstream of Maa2521, which may code for an exported protein. Mutants with insertions at this locus were susceptible to multiple antibiotics and slow growing in vitro and were unable to survive intracellularly within THP-1 cells. Like pks12 mutants, they exhibited increased Congo red binding, an indirect indication of cell wall modifications. Maa2520 and pks12 are the first genes to be linked by mutation to intrinsic drug resistance in MAC.

Utilization of a ts-sacB selection system for the generation of a Mycobacterium avium serovar-8 specific glycopeptidolipid allelic exchange mutant

Background

Mycobacterium avium are ubiquitous environmental organisms and a cause of disseminated infection in patients with end-stage AIDS. The glycopeptidolipids (GPL) of M. avium are proposed to participate in the pathogenesis of this organism, however, establishment of a clear role for GPL in disease production has been limited by the inability to genetically manipulate M. avium.

Methods

To be able to study the role of the GPL in M. avium pathogenesis, a ts-sacB selection system, not previously used in M. avium, was employed as a means to achieve homologous recombination for the rhamnosyltransferase (rtfA) gene of a pathogenic serovar 8 strain of M. avium to prevent addition of serovar-specific sugars to rhamnose of the fatty acyl-peptide backbone of GPL. The genotype of the resultant rtfA mutant was confirmed by polymerase chain reaction and southern hybridization. Disruption in the proximal sugar of the haptenic oligosaccharide resulted in the loss of serovar specific GPL with no change in the pattern of non-serovar specific GPL moieties as shown by thin layer chromatography and gas chromatography/mass spectrometry. Complementation of wild type (wt) rtfA in trans through an integrative plasmid restored serovar-8 specific GPL expression identical to wt serovar 8 parent strain.

Results

In this study, we affirm our results that rtfA encodes an enzyme responsible for the transfer of Rha to 6d-Tal and provide evidence of a second allelic exchange mutagenesis system suitable for M. avium.

Conclusion

We report the second allelic exchange system for M. avium utilizing ts-sacB as double-negative and xylE as positive counter-selection markers, respectively. This system of allelic exchange would be especially useful for M. avium strains that demonstrate significant isoniazid (INH) resistance despite transformation with katG. Through the construction of mutants in GPL or other mycobacterial components, their roles in M. avium pathogenesis, biosynthesis, or drug resistance can be studied in a consistent manner.

Biosynthetic specificity of the rhamnosyltransferase gene of Mycobacterium avium serovar 2 as determined by allelic exchange mutagenesis

In prior studies, through recombinant expression inMycobacterium smegmatis, thertfAgene ofMycobacterium aviumwas shown to encode a rhamnosyltransferase that catalyses the addition of rhamnose (Rha) to the 6-deoxytalose of serovar 2-specific glycopeptidolipid (GPL). Whether RtfA also catalyses the transfer of Rha to the alaninol of the lipopeptide core is unknown. An isogenicrtfAmutant ofM. aviumserovar 2 strain TMC724 was derived using a novel allelic exchange mutagenesis system utilizing a multicopy plasmid that contained thekatGgene ofMycobacterium bovisand the gene encoding green fluorescent protein (gfp). Overexpression of KatG inM. aviumresulted in increased susceptibility to isoniazid, thus providing counter-selection by enriching for clones that had lost plasmid DNA. Plasmid loss was confirmed by screening forgfp-negative clones to select putative allelic exchange mutants. Two exchange mutants were created, confirmed by Southern hybridization, and demonstrated loss of serovar 2-specific GPL by thin-layer chromatography (TLC). Gas chromatography of alditol acetate derivatives revealed the loss of Rha and the terminal 2,3-O-Me-fucose and preservation of 3-O-Me-Rha and 3,4-O-Me-Rha substituents at the terminal alaninol of the lipopeptide core. Complementation ofrtfAin transthrough an integrative plasmid restored serovar 2-specific GPL expression identical to wild-type TMC724. This result shows thatrtfAencodes an enzyme responsible only for the transfer of Rha to the serovar 2-specific oligosaccharide and provides a system of allelic exchange forM. aviumas a tool for future genetic studies involving this species.