Seed Priming with Zinc Oxide Nanoparticles to Enhance Crop Tolerance to Environmental Stresses

Drastic climate changes over the years have triggered environmental challenges for wild plants and crops due to fluctuating weather patterns worldwide. This has caused different types of stressors, responsible for a decrease in plant life and biological productivity, with consequent food shortages, especially in areas under threat of desertification. Nanotechnology-based approaches have great potential in mitigating environmental stressors, thus fostering a sustainable agriculture. Zinc oxide nanoparticles (ZnO NPs) have demonstrated to be biostimulants as well as remedies to both environmental and biotic stresses. Their administration in the early sowing stages, i.e., seed priming, proved to be effective in improving germination rate, seedling and plant growth and in ameliorating the indicators of plants' well-being. Seed nano-priming acts through several mechanisms such as enhanced nutrients uptake, improved antioxidant properties, ROS accumulation and lipid peroxidation. The target for seed priming by ZnO NPs is mostly crops of large consumption or staple food, in order to meet the increased needs of a growing population and the net drop of global crop frequency, due to climate changes and soil contaminations. The current review focuses on the most recent low-cost, low-sized ZnO NPs employed for seed nano-priming, to alleviate abiotic and biotic stresses, mitigate the negative effects of improper storage and biostimulate plants' growth and well-being. Taking into account that there is large variability among ZnO NPs and that their chemico-physical properties may play a role in determining the efficacy of nano-priming, for all examined cases, it is reported whether the ZnO NPs are commercial or lab prepared. In the latter cases, the preparation conditions are described, along with structural and morphological characterizations. Under these premises, future perspectives and challenges are discussed in relation to structural properties and the possibility of ZnO NPs engineering.

Magnetic biosensors for identification of SARS-CoV-2, Influenza, HIV, and Ebola viruses: a review

Infectious diseases such as novel coronavirus (SARS-CoV-2), Influenza, HIV, Ebola, etc kill many people around the world every year (SARS-CoV-2 in 2019, Ebola in 2013, HIV in 1980, Influenza in 1918). For example, SARS-CoV-2 has plagued higher than 317 000 000 people around the world from December 2019 to January 13, 2022. Some infectious diseases do not yet have not a proper vaccine, drug, therapeutic, and/or detection method, which makes rapid identification and definitive treatments the main challenges. Different device techniques have been used to detect infectious diseases. However, in recent years, magnetic materials have emerged as active sensors/biosensors for detecting viral, bacterial, and plasmids agents. In this review, the recent applications of magnetic materials in biosensors for infectious viruses detection have been discussed. Also, this work addresses the future trends and perspectives of magnetic biosensors.

A review of nanoparticle synthesis and application in the suppression of diseases in fruits and vegetables

Fruits and vegetables are an integral part of our diet attributed to their appealing taste, flavor, and health-promoting characteristics. However, due to their high-water activity, they are susceptible to microbial spoilage and diseases at any step in the food supply chain, from pre-harvest treatment to post-harvest storage and transportation. As a result, food researchers and engineers are developing innovative technologies that can be used to reduce the loss of fruits and vegetables on-farm and during postharvest processing. The purpose of this study was to gather and discuss the scientific data on the disease-suppressive activity of nanoparticles against plant pathogens. The progress and limitations of innovative approaches for improving nanoparticles' efficiency and dependability have been studied to develop effective substitutes for synthetic chemical fungicides and pesticides, in managing disease in fruits and vegetables. The findings of this study strongly suggests that nanotechnology has the required ability for disease suppression in fruits and vegetables. Applications of specific nanoparticles under specified conditions can enhance nutrition delivery to plants, provide better antibacterial and disease suppression activity. Nanoparticles can also lessen the quantity of agrichemicals/metals released into the environment as compared to standard formulations, which is one of the most impressive advances.

ZnO Nanoparticle-Mediated Seed Priming Induces Biochemical and Antioxidant Changes in Chickpea to Alleviate Fusarium Wilt

Chickpea (Cicer arietinum L.) is one of the main pulse crops of Pakistan. The yield of chickpea is affected by a variety of biotic and abiotic factors. Due to their environmentally friendly nature, different nanoparticles are being synthesized and applied to economically important crops. In the present study, Trichoderma harzianum has been used as a stabilizing and reducing agent for the mycosynthesis of zinc oxide nanoparticles (ZnO NPs). Before their application to control Fusarium wilt of chickpea, synthesized ZnO NPs were characterized. X-ray diffraction (XRD) analysis revealed the average size (13 nm) of ZnO NPs. Scanning electron microscopy (SEM) indicated their spherical structure, and energy dispersive X-ray analysis (EDX) confirmed the oxide formation of ZnO NPs. Transmission electron microscopy (TEM) described the size and shape of nanoparticles, and Fourier transform infrared (FTIR) spectroscopy displayed the presence of reducing and stabilizing chemical compounds (alcohol, carboxylic acid, amines, and alkyl halide). Successfully characterized ZnO NPs exhibited significant mycelial growth inhibition of Fusarium oxysporum, in vitro. In a greenhouse pot experiment, the priming of chickpea seeds with ZnO NPs significantly increased the antioxidant activity of germinated plants and they displayed 90% less disease incidence than the control. Seed priming with ZnO NPs helped plants to accumulate higher quantities of sugars, phenol, total proteins, and superoxide dismutase (SOD) to create resistance against wilt pathogen. These nanofungicides were produced in powder form and they can easily be transferred and used in the field to control Fusarium wilt of chickpea.

Green synthesis of ZrO2 nanoparticles and nanocomposites for biomedical and environmental applications: a review

Pollution and diseases such as the coronavirus pandemic (COVID-19) are major issues that may be solved partly by nanotechnology. Here we review the synthesis of ZrO₂ nanoparticles and their nanocomposites using compounds from bacteria, fungi, microalgae, and plants. For instance, bacteria, microalgae, and fungi secret bioactive metabolites such as fucoidans, digestive enzymes, and proteins, while plant tissues are rich in reducing sugars, polyphenols, flavonoids, saponins, and amino acids. These compounds allow reducing, capping, chelating, and stabilizing during the transformation of Zr⁴⁺ into ZrO₂ nanoparticles. Green ZrO₂ nanoparticles display unique properties such as a nanoscale size of 5-50 nm, diverse morphologies, e.g. nanospheres, nanorods and nanochains, and wide bandgap energy of 3.7-5.5 eV. Their high stability and biocompatibility are suitable biomedical and environmental applications, such as pathogen and cancer inactivation, and pollutant removal. Emerging applications of green ZrO₂-based nanocomposites include water treatment, catalytic reduction, nanoelectronic devices, and anti-biofilms.

Anaerobic mixed consortium (AMC) mediated enhanced biosynthesis of silver nano particles (AgNPs) and its application for the removal of phenol

In this research, silver nano particle (AgNP), was synthesized through a novel anaerobic mixed consortium mediation method and applied for the removal of phenol. The best operating conditions for the fabrication of silver nanoparticles were identified through response surface methodology (RSM) and the maximum yield was found to be 2.65 g/100 ml of anaerobic mixed consortium at optimal conditions of pH-8.6, temperature-90 °C, silver nitrate concentration-3 mg/ml and inoculum volume-3 ml. The synthesized nano particle exhibited a maximum phenol removal of 87.65% was achieved at pH:5.8. The synthesized silver nanoparticles were characterized by superior surface area (19.26 m²/g) and the stability was confirmed by thermo gravimetric analysis (upto 500 °C). The surface morphology was well explained using High Resolution Transmission Emission Microscopy (HR-TEM) and Scanning Electron Microscope with EDS (SEM-EDS) techniques. X-ray Diffraction (XRD) analysis confirmed the changes in crystalline structure due to the adsorption of phenol. Kinetic experiments fitted well with the intra-particle diffusion model. The nature of adsorption of phenol was confirmed as monolayer by the goodness of fit with Langmuir isotherm (R² > 0.9969).

Nanoparticles as Anti-Microbial, Anti-Inflammatory, and Remineralizing Agents in Oral Care Cosmetics: A Review of the Current Situation

Many investigations have pointed out widespread use of medical nanosystems in various domains of dentistry such as prevention, prognosis, care, tissue regeneration, and restoration. The progress of oral medicine nanosystems for individual prophylaxis is significant for ensuring bacterial symbiosis and high-quality oral health. Nanomaterials in oral cosmetics are used in toothpaste and other mouthwash to improve oral healthcare performance. These processes cover nanoparticles and nanoparticle-based materials, especially domains of application related to biofilm management in cariology and periodontology. Likewise, nanoparticles have been integrated in diverse cosmetic produces for the care of enamel remineralization and dental hypersensitivity. This review summarizes the indications and applications of several widely employed nanoparticles in oral cosmetics, and describes the potential clinical implementation of nanoparticles as anti-microbial, anti-inflammatory, and remineralizing agents in the prevention of dental caries, hypersensitivity, and periodontitis.

Synthesis, Functionalization, and Design of Magnetic Nanoparticles for Theranostic Applications

In order to translate nanotechnology into medical practice, magnetic nanoparticles (MNPs) have been presented as a class of non-invasive nanomaterials for numerous biomedical applications. In particular, MNPs have opened a door for simultaneous diagnosis and brisk treatment of diseases in the form of theranostic agents. This review highlights the recent advances in preparation and utilization of MNPs from the synthesis and functionalization steps to the final design consideration in evading the body immune system for therapeutic and diagnostic applications with addressing the most recent examples of the literature in each section. This study provides a conceptual framework of a wide range of synthetic routes classified mainly as wet chemistry, state-of-the-art microfluidic reactors, and biogenic routes, along with the most popular coating materials to stabilize resultant MNPs. Additionally, key aspects of prolonging the half-life of MNPs via overcoming the sequential biological barriers are covered through unraveling the biophysical interactions at the bio-nano interface and giving a set of criteria to efficiently modulate MNPs' physicochemical properties. Furthermore, concepts of passive and active targeting for successful cell internalization, by respectively exploiting the unique properties of cancers and novel targeting ligands are described in detail. Finally, this study extensively covers the recent developments in magnetic drug targeting and hyperthermia as therapeutic applications of MNPs. In addition, multi-modal imaging via fusion of magnetic resonance imaging, and also innovative magnetic particle imaging with other imaging techniques for early diagnosis of diseases are extensively provided.

Room temperature bioproduction, isolation and anti-microbial properties of stable elemental copper nanoparticles

•

Synthesis and characterization of elemental, zero-valent copper nanoparticles.

•

Copper nanoparticles synthesised by M. psychrotolerans are stable for up to 3 months.

•

Growth inhibiting properties of copper nanoparticles.

In nanoparticle production there are a number of important considerations that must be made. Producing nanoparticles of uniform size and shape is vital, but no less important is ensuring the production process is as efficient as possible in time, cost and energy. Traditional chemical and physical methods of nanoparticle production often involve high temperatures and pressures, as well as the use of toxic substrates; in contrast the bioproduction of nanoparticles is greener and requires a smaller input of energy resources. Here we outline a method for the straightforward bioproduction of stable, uniform elemental (zero-valent) copper nanoparticles at room temperature, and demonstrate how their size and shape can be modified by subsequent pH manipulation. We also highlight a potential application for these biogenic copper nanoparticles by demonstrating their potential to inhibit bacterial growth.

Biosynthesis of copper carbonate nanoparticles by ureolytic fungi

In this research, the ureolytic fungi Neurospora crassa, Pestalotiopsis sp. and Myrothecium gramineum were investigated for the preparation of nanoscale copper carbonate and the role of fungal extracellular protein in such mineral formation. After incubation in urea-modified media, carbonate-laden fungal supernatants were used for the precipitation of copper carbonate, with experimental results agreeing closely with those obtained using geochemical modelling (Geochemist’s Workbench). Compared with commercial and chemically synthesized copper carbonate, the minerals obtained using fungal supernatants were nanoscale and showed varying morphologies. It was found that extracellular protein played an important role in determining the size and morphology of the carbonate minerals precipitated, and after mixture with CuCl₂ and resultant copper carbonate precipitation, more than 80% protein was removed from the N. crassa supernatant. Moreover, with addition of extracellular protein extracted from different fungal supernatants or standard bovine serum albumin, more than 96% of protein was removed by carbonate mineral precipitation. These results provide direct experimental evidence for the preparation of copper carbonate nanoparticles utilizing fungal ureolytic activity and show that fungal extracellular protein plays an important role in the formation and size of specific nano metal carbonates. Such a process provides opportunities for production of specific and/or novel metal carbonate nanoparticles of applied relevance, and as precursors of other useful biomineral products such as oxides.

Antimicrobial Activity and Mechanism of Inhibition of Silver Nanoparticles against Extreme Halophilic Archaea

Haloarchaea are salt-loving halophilic microorganisms that inhabit marine environments, sea water, salterns, and lakes. The resistance of haloarchaea to physical extremities that challenge organismic survival is ubiquitous. Metal and antibiotic resistance of haloarchaea has been on an upsurge due to the exposure of these organisms to metal sinks and drug resistance genes augmented in their natural habitats due to anthropogenic activities and environmental pollution. The efficacy of silver nanoparticles (SNPs) as a potent and broad spectrum inhibitory agent is known, however, there are no reports on the inhibitory activity of SNPs against haloarchaea. In the present study, we have investigated the antimicrobial potentials of SNPs synthesized using aqueous leaf extract of Cinnamomum tamala against antibiotic resistant haloarchaeal isolates Haloferax prahovense RR8, Haloferax lucentense RR15, Haloarcula argentinensis RR10 and Haloarcula tradensis RR13. The synthesized SNPs were characterized by UV-Vis spectroscopy, scanning electron microscopy, energy dispersive X-ray spectroscopy, dynamic light scattering, X-ray diffraction and Fourier transform infrared spectroscopy. The SNPs demonstrated potent antimicrobial activity against the haloarchaea with a minimum inhibitory concentration of 300-400 μg/ml. Growth kinetics of haloarchaea in the presence of SNPs was studied by employing the Baranyi mathematical model for microbial growth using the DMFit curve fitting program. The C. tamala SNPs also demonstrated cytotoxic activity against human lung adenocarcinoma epithelial cell line (A540) and human breast adenocarcinoma cell line (MCF-7). The mechanism of inhibition of haloarchaea by the SNPs was investigated. The plausible mechanism proposed is the alterations and disruption of haloarchaeal membrane permeability by turbulence, inhibition of respiratory dehydrogenases and lipid peroxidation causing cellular and DNA damage resulting in cell death.

Time-dependent growth of crystalline Au(0)-nanoparticles in cyanobacteria as self-reproducing bioreactors: 2. Anabaena cylindrica

Microbial biosynthesis of metal nanoparticles as needed in catalysis has shown its theoretical ability as an extremely environmentally friendly production method in the last few years, even though the separation of the nanoparticles is challenging. Biosynthesis, summing up biosorption and bioreduction of diluted metal ions to zero valent metals, is especially ecofriendly, when the bioreactor itself is harmless and needs no further harmful reagents. The cyanobacterium Anabaena cylindrica (SAG 1403.2) is able to form crystalline Au(0)-nanoparticles from Au(3+) ions and does not release toxic anatoxin-a. X-ray powder diffraction (XRD), transmission electron microscopy (TEM) and laser-induced breakdown spectroscopy (LIBS) are applied to monitor the time-dependent development of gold nanoparticles for up to 40 hours. Some vegetative cells (VC) are filled with nanoparticles within minutes, while the extracellular polymeric substances (EPS) of vegetative cells and the heterocyst polysaccharide layer (HEP) are the regions, where the first nanoparticles are detected on most other cells. The uptake of gold starts immediately after incubation and within four hours the average size remains constant around 10 nm. Analyzing the TEM images with an image processing program reveals a wide distribution for the diameter of the nanoparticles at all times and in all regions of the cyanobacteria. Finally, the nanoparticle concentration in vegetative cells of Anabaena cylindrica is about 50% higher than in heterocysts (HC). These nanoparticles are found to be located along the thylakoid membranes.

Growth of Ag-nanoparticles in an aqueous solution and their antimicrobial activities against Gram positive, Gram negative bacterial strains and Candida fungus

Silver nanoparticles (AgNPs) were synthesized using Ocimum sanctum (Tulsi) leaves aqueous extract as reducing as well as a capping agent in absence and presence of cetyltrimethylammonium bromide (CTAB). The resulting nanomaterials were characterized by UV-visible spectrophotometer, and transmission electron microscope. The UV-Vis spectroscopy revealed the formation of AgNPs at 400-450 nm. TEM photographs indicate that the truncated triangular silver nanoplates and/or spherical morphology of the AgNPs with an average diameter of 25 nm have been distorted markedly in presence of CTAB. The AgNPs were almost mono disperse in nature. Antimicrobial activities of AgNPs were determined by using two bacteria (Gram positive Staphylococcus aureus MTCC-3160), Gram negative Escherichia coli MTCC-450) and one species of Candida fungus (Candida albicans ATCC 90030) with Kirby-Bauer or disc diffusion method. The zone of inhibition seems extremely good showing a relatively large zone of inhibition in both Staphylococcus aureus, Escherichia coli, and Candida albicans strains.

Green synthesis of biogenic silver nanomaterials using Raphanus sativus extract, effects of stabilizers on the morphology, and their antimicrobial activities

The present study explores the reducing and capping potentials of aqueous Raphanus sativus root extract for the synthesis of silver nanomaterials for the first time in the absence and presence of two stabilizers, namely, water-soluble starch and cetyltrimethylammonium bromide (CTAB). The surface properties of silver nanoparticles (AgNPs) were determined by dynamic light scattering (DLS), transmission electron microscopy (TEM), energy dispersion X-ray spectroscopy (EDX), scanning electron microscopy (SEM), X-ray diffraction (XRD), and Fourier transform infrared (FT-IR) techniques. The mean size of AgNPs, ranging from 3.2 to 6.0 nm, could be facilely controlled by merely varying the initial [extract], [CTAB], [starch], and [Ag(+)] ions. The agglomeration number, average number of silver atoms per nanoparticle, and changes in the fermi potentials were calculated and discussed. The AgNPs were evaluated for their antimicrobial activities against different pathogenic organisms. The inhibition action was due to the structural changes in the protein cell wall.

Toxicity of fungal-generated silver nanoparticles to soil-inhabiting Pseudomonas putida KT2440, a rhizospheric bacterium responsible for plant protection and bioremediation

Silver nanoparticles have attracted considerable attention due to their beneficial properties. But toxicity issues associated with them are also rising. The reports in the past suggested health hazards of silver nanoparticles at the cellular, molecular, or whole organismal level in eukaryotes. Whereas, there is also need to examine the exposure effects of silver nanoparticle to the microbes, which are beneficial to humans as well as environment. The available literature suggests the harmful effects of physically and chemically synthesised silver nanoparticles. The toxicity of biogenically synthesized nanoparticles has been less studied than physically and chemically synthesised nanoparticles. Hence, there is a greater need to study the toxic effects of biologically synthesised silver nanoparticles in general and mycosynthesized nanoparticles in particular. In the present study, attempts have been made to assess the risk associated with the exposure of mycosynthesized silver nanoparticles on a beneficial soil microbe Pseudomonas putida. KT2440. The study demonstrates mycosynthesis of silver nanoparticles and their characterisation by UV-vis spectrophotometry, FTIR, X-ray diffraction, nanosight LM20--a particle size distribution analyzer and TEM. Silver nanoparticles obtained herein were found to exert the hazardous effect at the concentration of 0.4 μg/ml, which warrants further detailed investigations concerning toxicity.

Ionic liquid mediated synthesis of nitrogen, carbon and fluorine-codoped rutile TiO2 nanorods for improved UV and visible light photocatalysis

The application of [BMIM][BF₄] ionic liquid as a designer solvent for the synthesis of multiple nonmetals-codoped rutile titania nanorods is presented. These nanorods show remarkable photoactivity under UV and visble light conditions.

Actinobacteria mediated synthesis of nanoparticles and their biological properties: A review

Nanotechnology is gaining tremendous attention in the present century due to its expected impact on many important areas such as medicine, energy, electronics, and space industries. In this context, actinobacterial biosynthesis of nanoparticles is a reliable, eco-friendly, and important aspect of green chemistry approach that interconnects microbial biotechnology and nanobiotechnology. Antibiotics produced by actinobacteria are popular in almost all the therapeutic measures and it is known that these microbes are also helpful in the biosynthesis of nanoparticles with good surface and size characteristics. In fact, actinobacteria are efficient producers of nanoparticles that show a range of biological properties, namely, antibacterial, antifungal, anticancer, anti-biofouling, anti-malarial, anti-parasitic, antioxidant, etc. This review describes the potential use of the actinobacteria as the novel sources for the biosynthesis of nanoparticles with improved biomedical applications.

Biosynthesis and characterization of silver nanoparticles produced by Pleurotus ostreatus and their anticandidal and anticancer activities

The biosynthesis of nanoparticles has received increasing interest because of the growing need to develop safe, cost-effective and environmentally friendly technologies for the synthesis of nano-materials. In this study, silver nanoparticles (AgNPs) were synthesized using a reduction of aqueous Ag(+) ions with culture supernatant from Pleurotus ostreatus. The bioreduction of AgNPs was monitored by ultra violet-visible spectroscopy and the obtained AgNPs were characterized by transmission electron microscopy (TEM) and Fourier transform infrared spectroscopy techniques. TEM studies showed the size of the AgNPs to be in the range of 4-15 nm. The formation of AgNPs might be an enzyme-mediated extracellular reaction process. Furthermore, the antifungal effect of AgNPs against Candida albicans as compared with commercially antifungal drugs was examined. The effect of AgNPs on dimorphic transition of C. albicans was tested. The anticancer properties of AgNPs against cells (MCF-7) were also evaluated. AgNPs caused a significant decrease in cell viability of an MCF-7 cell line (breast carcinoma). Exposure of MCF-7 cells with AgNPs resulted in a dose-dependent increase in cell growth inhibition varying from 5 to 78 % at concentrations in the range of 10-640 μg ml(-1). The present study demonstrated that AgNPs have potent antifungal, antidimorphic, and anticancer activities. The current research opens a new avenue for the green synthesis of nano-materials.

The effect of silver nanoparticles on seasonal change in arctic tundra bacterial and fungal assemblages

The impact of silver nanoparticles (NPs) and microparticles (MPs) on bacterial and fungal assemblages was studied in soils collected from a low arctic site. Two different concentrations (0.066% and 6.6%) of Ag NPs and Ag MPs were tested in microcosms that were exposed to temperatures mimicking a winter to summer transition. Toxicity was monitored by differential respiration, phospholipid fatty acid analysis, polymerase chain reaction-denaturing gradient gel electrophoresis and DNA sequencing. Notwithstanding the effect of Ag MPs, nanosilver had an obvious, additional impact on the microbial community, underscoring the importance of particle size in toxicity. This impact was evidenced by levels of differential respiration in 0.066% Ag NP-treated soil that were only half that of control soils, a decrease in signature bacterial fatty acids, and changes in both richness and evenness in bacterial and fungal DNA sequence assemblages. Prominent after Ag NP-treatment were Hypocreales fungi, which increased to 70%, from only 1% of fungal sequences under control conditions. Genera within this Order known for their antioxidant properties (Cordyceps/Isaria) dominated the fungal assemblage after NP addition. In contrast, sequences attributed to the nitrogen-fixing Rhizobiales bacteria appeared vulnerable to Ag NP-mediated toxicity. This combination of physiological, biochemical and molecular studies clearly demonstrate that Ag NPs can severely disrupt the natural seasonal progression of tundra assemblages.

Reduction of selenite to red elemental selenium by Rhodopseudomonas palustris strain N

The trace metal selenium is in demand for health supplements to human and animal nutrition. We studied the reduction of selenite (SeO₃⁻²) to red elemental selenium by Rhodopseudomonas palustris strain N. This strain was cultured in a medium containing SeO₃⁻² and the particles obtained from cultures were analyzed using transmission electron microscopy (TEM), energy dispersive microanalysis (EDX) and X ray diffraction analysis (XRD). Our results showed the strain N could reduce SeO₃⁻² to red elemental selenium. The diameters of particles were 80-200 nm. The bacteria exhibited significant tolerance to SeO₃⁻² up to 8.0 m mol/L concentration with an EC₅₀ value of 2.4 m mol/L. After 9 d of cultivation, the presence of SeO₃²⁻ up to 1.0 m mol/L resulted in 99.9% reduction of selenite, whereas 82.0% (p<0.05), 31.7% (p<0.05) and 2.4% (p<0.05) reduction of SeO₃⁻² was observed at 2.0, 4.0 and 8.0 m mol/L SeO₃²⁻ concentrations, respectively. This study indicated that red elemental selenium was synthesized by green technology using Rhodopseudomonas palustris strain N. This strain also indicated a high tolerance to SeO₃⁻². The finding of this work will contribute to the application of selenium to human health.

Biomarker discovery and applications for foods and beverages: proteomics to nanoproteomics

Foods and beverages have been at the heart of our society for centuries, sustaining humankind - health, life, and the pleasures that go with it. The more we grow and develop as a civilization, the more we feel the need to know about the food we eat and beverages we drink. Moreover, with an ever increasing demand for food due to the growing human population food security remains a major concern. Food safety is another growing concern as the consumers prefer varied foods and beverages that are not only traded nationally but also globally. The 21st century science and technology is at a new high, especially in the field of biological sciences. The availability of genome sequences and associated high-throughput sensitive technologies means that foods are being analyzed at various levels. For example and in particular, high-throughput omics approaches are being applied to develop suitable biomarkers for foods and beverages and their applications in addressing quality, technology, authenticity, and safety issues. Proteomics are one of those technologies that are increasingly being utilized to profile expressed proteins in different foods and beverages. Acquired knowledge and protein information have now been translated to address safety of foods and beverages. Very recently, the power of proteomic technology has been integrated with another highly sensitive and miniaturized technology called nanotechnology, yielding a new term nanoproteomics. Nanoproteomics offer a real-time multiplexed analysis performed in a miniaturized assay, with low-sample consumption and high sensitivity. To name a few, nanomaterials - quantum dots, gold nanoparticles, carbon nanotubes, and nanowires - have demonstrated potential to overcome the challenges of sensitivity faced by proteomics for biomarker detection, discovery, and application. In this review, we will discuss the importance of biomarker discovery and applications for foods and beverages, the contribution of proteomic technology in this process, and a shift towards nanoproteomics to suitably address associated issues. This article is part of a Special Issue entitled: Translational plant proteomics.

Aqueous phase synthesis of copper nanoparticles: a link between heavy metal resistance and nanoparticle synthesis ability in bacterial systems

We demonstrate aqueous phase biosynthesis of phase-pure metallic copper nanoparticles (CuNPs) using a silver resistant bacterium Morganella morganii. This is particularly important considering that there has been no report that demonstrates biosynthesis and stabilization of pure copper nanoparticles in the aqueous phase. Electrochemical analysis of bacterial cells exposed to Cu(2+) ions provides new insights into the mechanistic aspect of Cu(2+) ion reduction within the bacterial cell and indicates a strong link between the silver and copper resistance machinery of bacteria in the context of metal ion reduction. The outcomes of this study take us a step closer towards designing rational strategies for biosynthesis of different metal nanoparticles using microorganisms.

Inorganic materials using 'unusual' microorganisms

A promising avenue of research in materials science is to follow the strategies used by Mother Nature to fabricate ornate hierarchical structures as exemplified by organisms such as diatoms, sponges and magnetotactic bacteria. Some of the strategies used in the biological world to create functional inorganic materials may well have practical implications in the world of nanomaterials. Therefore, the strive towards exploring nature's ingenious work for designing strategies to create inorganic nanomaterials in our laboratories has led to development of biological and biomimetic synthesis routes over the past decade or so. A large proportion of these relentless efforts have explored the use of those microorganisms, which are typically not known to encounter these inorganic materials in their natural environment. Therefore, one can consider these microorganisms as 'unusual' for the purpose for which they have been utilized - it is in this context that this review has been penned down. In this extensive review, we discuss the use of these 'unusual' microorganisms for deliberate biosynthesis of various nanomaterials including biominerals, metals, sulfides and oxides nanoparticles. In addition to biosynthesis approach, we have also discussed a bioleaching approach, which can provide a noble platform for room-temperature synthesis of inorganic nanomaterials using naturally available raw materials. Moreover, the unique properties and functionalities displayed by these biogenic inorganic materials have been discussed, wherever such properties have been investigated previously. Finally, towards the end of this review, we have made efforts to summarize the common outcomes of the biosynthesis process and draw conclusions, which provide a perspective on the current status of the biosynthesis research field and highlights areas where future research in this field should be directed to realize the full potential of biological routes towards nanomaterials synthesis. Furthermore, the review clearly demonstrates that the biological route to inorganic materials synthesis is not merely an addition to the existing list of synthesis routes; biological routes using 'unusual' microorganisms might in fact provide an edge over other nanomaterials synthesis routes in terms of their eco-friendliness, low energy intensiveness, and economically-viable synthesis. This review has significant importance for colloids and interface science since it underpins the synthesis of colloidal materials using 'unusual' microorganism, wherein the role of biological interfaces for controlled synthesis of technologically important nanomaterials is clearly evident.

Fungus-mediated green synthesis of silver nanoparticles using Aspergillus terreus

The biosynthesis of nanoparticles has received increasing attention due to the growing need to develop safe, cost-effective and environmentally friendly technologies for nano-materials synthesis. In this report, silver nanoparticles (AgNPs) were synthesized using a reduction of aqueous Ag⁺ ion with the culture supernatants of Aspergillus terreus. The reaction occurred at ambient temperature and in a few hours. The bioreduction of AgNPs was monitored by ultraviolet-visible spectroscopy, and the AgNPs obtained were characterized by transmission electron microscopy and X-ray diffraction. The synthesized AgNPs were polydispersed spherical particles ranging in size from 1 to 20 nm and stabilized in the solution. Reduced nicotinamide adenine dinucleotide (NADH) was found to be an important reducing agent for the biosynthesis, and the formation of AgNPs might be an enzyme-mediated extracellular reaction process. Furthermore, the antimicrobial potential of AgNPs was systematically evaluated. The synthesized AgNPs could efficiently inhibit various pathogenic organisms, including bacteria and fungi. The current research opens a new avenue for the green synthesis of nano-materials.

UV-switchable polyoxometalate sandwiched between TiO2 and metal nanoparticles for enhanced visible and solar light photococatalysis

To improve the photocatalytic efficiency of TiO(2)-based nanomaterials, we demonstrate a facile, generalized, highly localized reduction approach to the decoration of TiO(2)-polyoxometalate composites with a range of metal nanoparticles including Cu, Ag, Pt, and Au. The synthesis of nanocomposite photococatalysts reported in this study has been achieved by utilizing the unique ability of the TiO(2)-bound PTA (phosphotungstic acid) molecules (a polyoxometalate, POM) to act as a highly localized UV-switchable reducing agent that specifically reduces metal ions to their nanoparticulate forms directly and only onto the TiO(2) surface. This leads to the metal contaminant-free synthesis of TiO(2)-PTA-metal nanocomposites, which is a significant advantage of the proposed approach. The study further demonstrates that polyoxometalates are regenerable photoactive molecules with outstanding electron-transfer ability and the deposition of metal nanoparticles on the TiO(2)-PTA cocatalytic surface can have a dramatic effect on increasing the overall photocatalytic performance of the composite system. Moreover, it is observed that the photococatalytic performance of the TiO(2)-PTA-metal nanoparticles can be fine tuned by choosing the composition of metal nanoparticles in the nanocomposite. Interestingly, the photococatalysts reported here are found to be active under visible and simulated solar-light conditions. The underlying reaction mechanism for enhanced solar-light photococatalysis has been proposed.

Quasi-cubic magnetite/silica core-shell nanoparticles as enhanced MRI contrast agents for cancer imaging

Development of magnetic resonance imaging (MRI) contrast agents that can be readily applied for imaging of biological tissues under clinical settings is a challenging task. This is predominantly due to the expectation of an ideal MR agent being able to be synthesized in large quantities, possessing longer shelf life, reasonable biocompatibility, tolerance against its aggregation in biological fluids, and high relaxivity, resulting in better contrast during biological imaging. Although a repertoire of reports address various aforementioned issues, the previously reported results are far from optimal, which necessitates further efforts in this area. In this study, we demonstrate facile large-scale synthesis of sub-100 nm quasi-cubic magnetite and magnetite/silica core-shell (Mag@SiO2) nanoparticles and their applicability as a biocompatible T2 contrast agent for MRI of biological tissues. Our study suggests that silica-coated magnetite nanoparticles reported in this study can potentially act as improved MR contrast agents by addressing a number of aforementioned issues, including longer shelf life and stability in biological fluids. Additionally, our in vitro and in vivo studies clearly demonstrate the importance of silica coating towards improved applicability of T2 contrast agents for cancer imaging.

Genus-wide physicochemical evidence of extracellular crystalline silver nanoparticles biosynthesis by Morganella spp

This study was performed to determine whether extracellular silver nanoparticles (AgNPs) production is a genus-wide phenotype associated with all the members of genus Morganella, or only Morganella morganii RP-42 isolate is able to synthesize extracellular Ag nanoparticles. To undertake this study, all the available Morganella isolates were exposed to Ag⁺ ions, and the obtained nanoproducts were thoroughly analyzed using physico-chemical characterization tools such as transmission electron microscopy (TEM), UV-visible spectrophotometry (UV-vis), and X-ray diffraction (XRD) analysis. It was identified that extracellular biosynthesis of crystalline silver nanoparticles is a unique biochemical character of all the members of genus Morganella, which was found independent of environmental changes. Significantly, the inability of other closely related members of the family Enterobacteriaceae towards AgNPs synthesis strongly suggests that AgNPs synthesis in the presence of Ag⁺ ions is a phenotypic character that is uniquely associated with genus Morganella.