A cell nanoinjector based on carbon nanotubes

Recent advances of nanopore technique in single cell analysis

Single cells and their dynamic behavior are closely related to biological research. Monitoring their dynamic behavior is of great significance for disease prevention. How to achieve rapid and non-destructive monitoring of single cells is a major issue that needs to be solved urgently. As an emerging technology, nanopores have been proven to enable non-destructive and label-free detection of single cells. The structural properties of nanopores enable a high degree of sensitivity and accuracy during analysis. In this article, we summarize and classify the different types of solid-state nanopores that can be used for single-cell detection and illustrate their specific applications depending on the size of the analyte. In addition, their research progress in material transport and microenvironment monitoring is also highlighted. Finally, a brief summary of existing research challenges and future trends in nanopore single-cell analysis is tentatively provided.

Nanoinjection of extracellular vesicles to single live cells by robotic fluidic force microscopy

In the past decade, extracellular vesicles (EVs) have attracted substantial interest in biomedicine. With progress in the field, we have an increasing understanding of cellular responses to EVs. In this Technical Report, we describe the direct nanoinjection of EVs into the cytoplasm of single cells of different cell lines. By using robotic fluidic force microscopy (robotic FluidFM), nanoinjection of GFP positive EVs and EV-like particles into single live HeLa, H9c2, MDA-MB-231 and LCLC-103H cells proved to be feasible. This injection platform offered the advantage of high cell selectivity and efficiency. The nanoinjected EVs were initially localized in concentrated spot-like regions within the cytoplasm. Later, they were transported towards the periphery of the cells. Based on our proof-of-principle data, robotic FluidFM is suitable for targeting single living cells by EVs and may lead to information about intracellular EV cargo delivery at a single-cell level.

Differential cytotoxicity to human cells in vitro of tire wear particles emitted from typical road friction patterns: The dominant role of environmental persistent free radicals

Tire wear particles (TWPs) have been recognized as one of the major sources of microplastics (MPs), however, effects of initial properties and photochemical behavior of TWPs on cytotoxicity to human cells in vitro have not been reported. Therefore, here, three TWPs generated from typical wear of tires and pavements (i.e., rolling friction (R-TWPs) and sliding friction (S-TWPs)) and cryogenically milled tire tread (C-TWPs), respectively, and their photoaging counterparts were used to study the reasons for their differential cytotoxicity to 16HBE cells in vitro. Results showed in addition to changes of surface structure and morphology, different preparation methods could also induce formation of different concentration levels of environmental persistent free radicals (EPFRs) (from 1.24 to 3.06 × 1017 spins/g with g-factors ranging 2.00307-2.00310) on surfaces of TWPs, which contained 7.3%-65.8% of reactive EPFRs (r-EPFRs). Meanwhile, photoaging for 90 d could strengthen formation of EPFRs (from 4.03 to 4.61 × 1017 spins/g) with containing 74.7%-78.1% r-EPFRs on surfaces of TWPs and improve their g-factor indexes (ranging 2.00309-2.00313). At 100 μg mL-1 level, compared to C-TWPs, both R-TWPs and S-TWPs (whether photoaging or not) carried higher intensity EPFRs could significantly inhibit 16HBE cells proliferation activity, cause more cells oxidative stress and induce more cell apoptosis/necrosis and secretion of inflammatory factor (P < 0.05). However, regardless of how TWPs were prepared, photoaged or not, exposure at a concentration of 1 μg mL-1 appeared to be non-acute cytotoxic. Correlation analysis suggested dominant toxicity of TWPs was attributed to the formation of r-EPFRs on their surfaces, which could promote accumulation of excess reactive oxygen species in cells and the massive deposition of intracellular particles. This study provides direct evidence of TWPs cytotoxicity, and underlining the need for a better understanding of the influences of initial properties and photochemical characteristics on risk assessment of TWPs released into the environment.

The Use of Nanoneedles in Drug Delivery: an Overview of Recent Trends and Applications

Nanoneedles (NN) are growing rapidly as a means of navigating biological membranes and delivering therapeutics intracellularly. Nanoneedle arrays (NNA) are among the most potential resources to achieve therapeutic effects by administration of drugs through the skin. Although this is based on well-established approaches, its implementations are rapidly developing as an important pharmaceutical and biological research phenomenon. This study intends to provide a broad overview of current NNA research, with an emphasis on existing approaches, applications, and types of compounds released by these systems. A nanoneedle-based delivery device with great spatial and temporal accuracy, minimal interference, and low toxicity could transfer biomolecules into living organisms. Due to its vast potential, NN has been widely used as a capable transportation system of many therapeutic active substances, from cancer therapy, vaccine delivery, cosmetics, and bio-sensing nanocarrier drugs to genes. The use of nanoneedles for drug delivery offers new opportunities for the rapid, targeted, and exact administration of biomolecules into cell membranes for high-resolution research of biological systems, and it can treat a wide range of biological challenges. As a result, the literature has analyzed existing patents to emphasize the status of NNA in biological applications.

Borophene as an carrier for mercaptopurine drug: electronic study via density-functional theory computations

CONTEXT

This paper studied MP-B36 interactions through DFT. MP molecules were observed to have a substantial tendency to be adsorbed through their N heads onto B36 at its edge, based on large adsorption energy values. The B atoms at the edges of B36 nanosheets showed higher reactivity than the internal B atoms toward MP. The electronic properties changed upon MP adsorption. The MP-B36 configurations of the highest stability underwent an energy gap reduction of 11-47%. Natural bond orbital (NBO) analysis and molecular electrostatic potential (MEP) analysis were used to evaluate the MP-B36 interaction.

METHODS

The configurations were subjected to geometric optimization at the TPSSH/6-31 + G(d) level of theory, at which frequency analysis was carried out to evaluate the stationary points. These configurations were neutral (Q = 0). The electronic properties of MP dramatically changed upon its interaction with B36 nanosheets. The stable configurations underwent an energy gap reduction, suggesting a chemical signal. The MP molecules were observed to be effectively adsorbed onto the B36 edge within aqueous phases. The MP-B36 configurations were estimated to have relatively large dipole moments. This demonstrated that MP-B36 systems were soluble and dispersed within solar media (e.g., water). It was concluded that B36 nanosheets could serve as efficient MP carriers in nanomedical drug delivery applications.

Nanotube Functionalization: Investigation, Methods and Demonstrated Applications

This review presents an update on nanotube functionalization, including an investigation of their methods and applications. The review starts with the discussion of microscopy and spectroscopy investigations of functionalized carbon nanotubes (CNTs). The results of transmission electron microscopy and scanning tunnelling microscopy, X-ray photoelectron spectroscopy, infrared spectroscopy, Raman spectroscopy and resistivity measurements are summarized. The update on the methods of the functionalization of CNTs, such as covalent and non-covalent modification or the substitution of carbon atoms, is presented. The demonstrated applications of functionalized CNTs in nanoelectronics, composites, electrochemical energy storage, electrode materials, sensors and biomedicine are discussed.

Semi-Implantable Bioelectronics

Developing techniques to effectively and real-time monitor and regulate the interior environment of biological objects is significantly important for many biomedical engineering and scientific applications, including drug delivery, electrophysiological recording and regulation of intracellular activities. Semi-implantable bioelectronics is currently a hot spot in biomedical engineering research area, because it not only meets the increasing technical demands for precise detection or regulation of biological activities, but also provides a desirable platform for externally incorporating complex functionalities and electronic integration. Although there is less definition and summary to distinguish it from the well-reviewed non-invasive bioelectronics and fully implantable bioelectronics, semi-implantable bioelectronics have emerged as highly unique technology to boost the development of biochips and smart wearable device. Here, we reviewed the recent progress in this field and raised the concept of "Semi-implantable bioelectronics", summarizing the principle and strategies of semi-implantable device for cell applications and in vivo applications, discussing the typical methodologies to access to intracellular environment or in vivo environment, biosafety aspects and typical applications. This review is meaningful for understanding in-depth the design principles, materials fabrication techniques, device integration processes, cell/tissue penetration methodologies, biosafety aspects, and applications strategies that are essential to the development of future minimally invasive bioelectronics.

Nanoscale-tipped wire array injections transfer DNA directly into brain cells ex vivo and in vivo

Genetic modification to restore cell functions in the brain can be performed through the delivery of biomolecules in a minimally invasive manner into live neuronal cells within brain tissues. However, conventional nanoscale needles are too short (lengths of ~10 µm) to target neuronal cells in ~1‐mm‐thick brain tissues because the neuronal cells are located deep within the tissue. Here, we report the use of nanoscale‐tipped wire (NTW) arrays with diameters < 100 nm and wire lengths of ~200 µm to address biomolecule delivery issues. The NTW arrays were manufactured by growth of silicon microwire arrays and nanotip formation. This technique uses pinpoint, multiple‐cell DNA injections in deep areas of brain tissues, enabling target cells to be marked by fluorescent protein (FP) expression vectors. This technique has potential for use for electrophysiological recordings and biological transfection into neuronal cells. Herein, simply pressing an NTW array delivers and expresses plasmid DNA in multiple‐cultured cells and multiple‐neuronal cells within a brain slice with reduced cell damage. Additionally, DNA transfection is demonstrated using brain cells ex vivo and in vivo. Moreover, knockdown of a critical clock gene after injecting a short hairpin RNA (shRNA) and a genome‐editing vector demonstrates the potential to genetically alter the function of living brain cells, for example, pacemaker cells of the mammalian circadian rhythms. Overall, our NTW array injection technique enables genetic and functional modification of living cells in deep brain tissue areas, both ex vivo and in vivo.

Carbon Nanotubes: Current Perspectives on Diverse Applications in Targeted Drug Delivery and Therapies

Current discoveries as well as research findings on various types of carbon nanostructures have inspired research into their utilization in a number of fields. These carbon nanostructures offer uses in pharmacy, medicine and different therapies. One such unique carbon nanostructure includes carbon nanotubes (CNTs), which are one-dimensional allotropes of carbon nanostructure that can have a length-to-diameter ratio greater than 1,000,000. After their discovery, CNTs have drawn extensive research attention due to their excellent material properties. Their physical, chemical and electronic properties are excellent and their composites provide great possibilities for enormous nanometer applications. The current study provides a systematic review based on prior literature review and data gathered from various sources. The various research studies from many research labs and organizations were systematically retrieved, collected, compiled and written. The entire collection and compilation of this review concluded the use of CNT approaches and their efficacy and safety for the treatment of various diseases such as brain tumors or cancer via nanotechnology-based drug delivery, phototherapy, gene therapy, antiviral therapy, antifungal therapy, antibacterial therapy and other biomedical applications. The current review covers diverse applications of CNTs in designing a range of targeted drug delivery systems and application for various therapies. It concludes with a discussion on how CNTs based medicines can expand in the future.

Steered Molecular Dynamics of Lipid Membrane Indentation by Carbon and Silicon-Carbide Nanotubes-The Impact of Indenting Angle Uncertainty

Due to the semi-liquid nature and uneven morphologies of biological membranes, indentation may occur in a range of non-ideal conditions. These conditions are relatively unstudied and may alter the physical characteristics of the process. One of the basic challenges in the construction of nanoindenters is to appropriately align the nanotube tip and approach the membrane at a perpendicular angle. To investigate the impact of deviations from this ideal, we performed non-equilibrium steered molecular dynamics simulations of the indentation of phospholipid membranes by homogeneous CNT and non-homogeneous SiCNT indenters. We used various angles, rates, and modes of indentation, and the withdrawal of the relative indenter out of the membrane in corresponding conditions was simulated.

Microfluidic and Nanofluidic Intracellular Delivery

Innate cell function can be artificially engineered and reprogrammed by introducing biomolecules, such as DNAs, RNAs, plasmid DNAs, proteins, or nanomaterials, into the cytosol or nucleus. This process of delivering exogenous cargos into living cells is referred to as intracellular delivery. For instance, clustered regularly interspaced short palindromic repeats (CRISPR)-Cas9 gene editing begins with internalizing Cas9 protein and guide RNA into cells, and chimeric antigen receptor-T (CAR-T) cells are prepared by delivering CAR genes into T lymphocytes for cancer immunotherapies. To deliver external biomolecules into cells, tools, including viral vectors, and electroporation have been traditionally used; however, they are suboptimal for achieving high levels of intracellular delivery while preserving cell viability, phenotype, and function. Notably, as emerging solutions, microfluidic and nanofluidic approaches have shown remarkable potential for addressing this open challenge. This review provides an overview of recent advances in microfluidic and nanofluidic intracellular delivery strategies and discusses new opportunities and challenges for clinical applications. Furthermore, key considerations for future efforts to develop microfluidics- and nanofluidics-enabled next-generation intracellular delivery platforms are outlined.

Nanoneedle-Based Materials for Intracellular Studies

Nanoneedles, defined as high aspect ratio structures with tip diameters of 5 to approximately 500 nm, are uniquely able to interface with the interior of living cells. Their nanoscale dimensions mean that they are able to penetrate the plasma membrane with minimal disruption of normal cellular functions, allowing researchers to probe the intracellular space and deliver or extract material from individual cells. In the last decade, a variety of strategies have been developed using nanoneedles, either singly or as arrays, to investigate the biology of cancer cells in vitro and in vivo. These include hollow nanoneedles for soluble probe delivery, nanocapillaries for single-cell biopsy, nano-AFM for direct physical measurements of cytosolic proteins, and a wide range of fluorescent and electrochemical nanosensors for analyte detection. Nanofabrication has improved to the point that nanobiosensors can detect individual vesicles inside the cytoplasm, delineate tumor margins based on intracellular enzyme activity, and measure changes in cell metabolism almost in real time. While most of these applications are currently in the proof-of-concept stage, nanoneedle technology is poised to offer cancer biologists a powerful new set of tools for probing cells with unprecedented spatial and temporal resolution.

Atherosclerosis and Nanomedicine Potential: Current Advances and Future Opportunities

Atherosclerosis is the leading inducement of cardiovascular diseases, which ranks the first cause of global deaths. It is an arterial disease associated with dyslipidemia and changes in the composition of the vascular wall. Besides invasive surgical strategy, the current conservative clinical treatment for atherosclerosis falls into two categories, lipid regulating-based therapy and antiinflammatory therapy. However, the existing strategies based on conventional drug delivery systems have shown limited efficacy against disease development and plenty of side effects. Nanomedicine has great potential in the development of targeted therapy, controlled drug delivery and release, the design of novel specific drugs and diagnostic modalities, and biocompatible scaffolds with multifunctional characteristics, which has led to an evolution in the diagnosis and treatment of atherosclerosis. This paper will focus on the latest nanomedicine strategies for atherosclerosis diagnosis and treatment as well as discussing the potential therapeutic targets during atherosclerosis progress, which could form the basis of development of novel nanoplatform against atherosclerosis.

Efficient tailoring of platinum nanoparticles supported on multiwalled carbon nanotubes for cancer therapy

Aim: Therapeutically targeting cancer stem cells (CSCs), which play a role in tumor initiation and relapse, remains challenging. Materials & methods: Novel-formulated platinum nanoparticles (Pt-NPs) supported on polybenzimidazole (PBI)-functionalized polymers and multiwalled carbon nanotubes (MWCNT) were prepared and their effect on CSCs was evaluated. Results: Pt-NPs showed homogenous distribution on the surface of MWCNT/PBI composites, with very narrow particle size. MWCNT/PBI/Pt-NPs resulted in a dramatic decrease in the proliferation rate of CSCs but not bone marrow mesenchymal stem cells (BM-MSCs). Quantitative gene expression analysis revealed that MWCNT/PBI/Pt had a significant inhibitory effect on the epithelial-mesenchymal transition and cell cycle markers of CSCs. Conclusion: MWCNT/PBI/Pt exhibited a specific cytotoxic effect on breast CSCs but not on adult stem cells.

Protein assembled nano-vehicle entrapping photosensitizer molecules for efficient lung carcinoma therapy

The efficiency of drug depends not only on its potency but also on its ability to reach the target sites in preference to non-target sites. In this regard, protein assembled nanocarrier is the most promising strategy for intracellular anti-cancer drug delivery. The key motive of this study is to fabricate biocompatible protein assembled nanocarrier conjugated photosensitizer system for stimuli-responsive treatment of lung carcinoma. Here, we have synthesized a unique nanohybrid of protein assembled gold nanoparticles (AuNPs), attaching a model photosensitizer, Protoporphyrin IX (PpIX) to the protein shell of the nanoparticles (NPs) imparting an ideal drug-carrier nature. Photo-induced alteration in hydrodynamic diameter suggests structural perturbation of the nanohybrid which in terms signifies on-demand drug delivery. The drug release profile has been further confirmed by using steady-state fluorescence experiments. AuNP-PpIX showed excellent anti-cancer efficiency upon green light irradiation on lung adenocarcinoma cell line (A549) through intracellular reactive oxygen species (ROS) generation. The cellular morphological changes upon PDT and internalization of nanohybrid were monitored using confocal laser scanning microscope. This anti-cancer effect of nanohybrid was associated with apoptotic pathway which was confirmed in the flow cytometric platform. The developed nanomedicine is expected to find relevance in clinical anti-cancer PDT models in the near future.

Soybean-derived blue photoluminescent carbon dots

Biomass-derived carbon dots (CDs) are biocompatible and have potential for a variety of applications, including bioimaging and biosensing. In this work, we use ground soybean residuals to synthesize carbon nanoparticles by hydrothermal carbonization (HTC), annealing at high temperature, and laser ablation (LA) in a NH₄OH solution. The carbon nanoparticles synthesized with the HTC process (HTC-CDs) exhibit photoluminescent characteristics with strong blue emission. The annealing of the HTC-processed carbon particles in the range of 250 to 850 °C causes a loss of the photoluminescent characteristics of the CDs without any significant change in the microstructure (amorphous structure) of the carbon particles. The LA processing of the annealed HTC-processed carbon particles introduces nitrogen-containing surface-functional groups and leads to the recovery of the photoluminescent features that are different from those of the HTC-CDs and dependent on the fraction of nitrogen in the surface-functional groups. The photoluminescence of both the HTC-CDs and LA-CDs is largely due to the presence of N-containing surface-functional groups. The quantum yield of the LA-CDs is more constant than that of the HTC-CDs under continuous UV excitation and does not exhibit a significant reduction after 150 min of excitation. The methods used in this work provide a simple and green strategy to introduce N-surface-functional groups to carbon nanoparticles made from biomass and biowaste and to produce stable photoluminescent CDs with excellent water-wettability.

Fluorescent Single-Walled Carbon Nanotubes for Protein Detection

Nanosensors have a central role in recent approaches to molecular recognition in applications like imaging, drug delivery systems, and phototherapy. Fluorescent nanoparticles are particularly attractive for such tasks owing to their emission signal that can serve as optical reporter for location or environmental properties. Single-walled carbon nanotubes (SWCNTs) fluoresce in the near-infrared part of the spectrum, where biological samples are relatively transparent, and they do not photobleach or blink. These unique optical properties and their biocompatibility make SWCNTs attractive for a variety of biomedical applications. Here, we review recent advancements in protein recognition using SWCNTs functionalized with either natural recognition moieties or synthetic heteropolymers. We emphasize the benefits of the versatile applicability of the SWCNT sensors in different systems ranging from single-molecule level to in-vivo sensing in whole animal models. Finally, we discuss challenges, opportunities, and future perspectives.

Intracellular Delivery and Sensing System Based on Electroplated Conductive Nanostraw Arrays

One-dimensional nanoneedle-like arrays have emerged as an attractive tool for penetrating the cell membrane to achieve intracellular applications including drug delivery, electrical recording, and biochemical detection. Hollow nanoneedles, also called nanostraws (NSs), combined with nanoelectroporation have been demonstrated as a powerful platform for intracellular drug delivery and extraction of intracellular contents. However, the fabrication technique of nanostraws still requires complicated and expensive atomic layer deposition and etching processes and fails to produce conductive nanostraws. Herein, we developed a commonly accessible and versatile electrodeposition approach to controllably fabricate conductive nanostraw arrays based on various types of metal or conductive polymer materials. Representatively, Pt nanostraws (Pt NSs) with 400 nm diameter were further integrated with a low-voltage nanoelectroporation system to achieve cell detection, intracellular drug delivery, and sensing of intracellular enzymes. Both theoretical simulations and experimental results revealed that the conductive nanostraws in direct contact with cells could induce high-efficiency cell electroporation at relatively low voltage (∼5 V). Efficient delivery of reagents into live cells with spatial control and repeated extraction of intracellular enzymes (e.g., caspase-3) for temporal monitoring from the same set of cells were demonstrated. This work not only pioneers a new avenue for universal production of conductive nanostraws on a large scale but also presents great potential for developing nanodevices to achieve a variety of biomedical applications including cell re-engineering, cell-based therapy, and signaling pathway monitoring.

Carbon Nanotubes Translocation through a Lipid Membrane and Transporting Small Hydrophobic and Hydrophilic Molecules

Carbon nanotubes (CNTs) are extensively adopted in the applications of biotechnology and biomedicine. Their interactions with cell membranes are of great importance for understanding the toxicity of CNTs and the application of drug delivery. In this paper, we use atomic molecular dynamics simulations to study the permeation and orientation of pristine and functionalized CNTs in a lipid bilayer. Pristine CNT (PCNT) can readily permeate into the membrane and reside in the hydrophobic region without specific orientation. The insertion of PCNTs into the lipid bilayer is robust and independent on the lengths of PCNTs. Due to the presence of hydroxyl groups on both ends of the functionalized CNT (FCNT), FCNT prefers to stand upright in the lipid bilayer center. Compared with PCNT, FCNT is more suitable to be a bridge connecting the inner and outer lipid membrane. The inserted CNTs have no distinct effects on membrane structure. However, they may block the ion channels. In addition, preliminary explorations on the transport properties of CNTs show that the small hydrophobic molecule carbon dioxide can enter both PCNT and FCNT hollow channels. However, hydrophilic molecule urea is prone to penetrate the PCNT but finds it difficult to enter the FCNT. These results may provide new insights into the internalization of CNT in the lipid membrane and the transport properties of CNTs when embedded therein.

Advanced nanostructures for cell membrane poration

Nanostructured devices are able to foster the technology for cell membrane poration. With the size smaller than a cell, nanostructures allow efficient poration on the cell membrane. Emerging nanostructures with various physical transduction have been demonstrated to accommodate effective intracellular delivery. Aside from improving poration and intracellular delivery performance, nanostructured devices also allow for the discovery of novel physiochemical phenomena and the biological response of the cell. This article provides a brief introduction to the principles of nanostructured devices for cell poration and outlines the intracellular delivery capability of the technology. In the future, we envision more exploration on new nanostructure designs and creative applications in biomedical fields.

Graphene quantum dot assisted translocation of drugs into a cell membrane

Graphene quantum dots (GQDs) are increasingly being recognized as anti-cancer drug carriers, e.g., doxorubicin delivery, in many experiments. In this work, the structure, thermodynamics and dynamic properties of model drugs (doxorubicin and deoxyadenosine) translocating into a POPC lipid membrane with the assistance of GQDs were investigated via MD simulation and free energy calculation. The simulation results imply that GQD19 can facilitate the permeation of model drugs into the lipid membrane on the nanosecond timescale with less deformation of the cell membrane structure. More importantly, free energy calculations further revealed that the translocation free energy of doxorubicin or deoxyadenosine permeating into the lipid bilayer could be significantly reduced with the assistance of GQD19. Our results suggest that GQDs with appropriate size may assist in the drug delivery process by reducing the translocation free energy permeating into the biomembrane. These results may promote the molecular design and application of GQD-based drug delivery systems.

SS, Paggi M, Bordas SP. Advances in Carbon Based Nanomaterials for Bio-Medical Applications

:

The unique mechanical, electrical, thermal, chemical and optical properties of carbon based nanomaterials (CBNs) like: Fullerenes, Graphene, Carbon nanotubes, and their derivatives made them widely used materials for various applications including biomedicine. Few recent applications of the CBNs in biomedicine include: cancer therapy, targeted drug delivery, bio-sensing, cell and tissue imaging and regenerative medicine. However, functionalization renders the toxicity of CBNs and makes them soluble in several solvents including water, which is required for biomedical applications. Hence, this review represents the complete study of development in nanomaterials of carbon for biomedical uses. Especially, CBNs as the vehicles for delivering the drug in carbon nanomaterials is described in particular. The computational modeling approaches of various CBNs are also addressed. Furthermore, prospectus, issues and possible challenges of this rapidly developing field are highlighted.

Intracellular Delivery by Membrane Disruption: Mechanisms, Strategies, and Concepts

Intracellular delivery is a key step in biological research and has enabled decades of biomedical discoveries. It is also becoming increasingly important in industrial and medical applications ranging from biomanufacture to cell-based therapies. Here, we review techniques for membrane disruption-based intracellular delivery from 1911 until the present. These methods achieve rapid, direct, and universal delivery of almost any cargo molecule or material that can be dispersed in solution. We start by covering the motivations for intracellular delivery and the challenges associated with the different cargo types-small molecules, proteins/peptides, nucleic acids, synthetic nanomaterials, and large cargo. The review then presents a broad comparison of delivery strategies followed by an analysis of membrane disruption mechanisms and the biology of the cell response. We cover mechanical, electrical, thermal, optical, and chemical strategies of membrane disruption with a particular emphasis on their applications and challenges to implementation. Throughout, we highlight specific mechanisms of membrane disruption and suggest areas in need of further experimentation. We hope the concepts discussed in our review inspire scientists and engineers with further ideas to improve intracellular delivery.

Inductively actuated micro needles for on-demand intracellular delivery

Methods that provide controlled influx of molecules into cells are of critical importance for uncovering cellular mechanisms, drug development and synthetic biology. However, reliable intracellular delivery without adversely affecting the cells is a major challenge. We developed a platform for on-demand intracellular delivery applications, with which cell membrane penetration is achieved by inductive heating of micro needles. The micro needles of around 1 μm in diameter and 5 μm in length are made of gold using a silicon-based micro fabrication process that provides flexibility with respect to the needles' dimensions, pitch, shell thickness and the covered area. Experiments with HCT 116 colon cancer cells showed a high biocompatibility of the gold needle platform. Transmission electron microscopy of the cell-needle interface revealed folding of the cell membrane around the needle without penetration, preventing any delivery, which was confirmed using the EthD-1 fluorescent dye. The application of an alternating magnetic field, however, resulted in the delivery of EthD-1 by localized heating of the micro needles. Fluorescence quantification showed that intracellular delivery, with as high as 75% efficiency, is achieved for specific treatment times between 1 and 5 minutes. Overexposure of the cells to the heated micro needles, i.e. longer magnetic field application, leads to an increase in cell death, which can be exploited for cleaning the platform. This method allows to perform intracellular deliver by remotely activating the micro needles via a magnetic field, and it is controlled by the application time, making it a versatile and easy to use method. The wireless actuation could also be an attractive feature for in-vivo delivery and implantable devices.

Partner-facilitating transmembrane penetration of nanoparticles: a biological test in silico

Transmembrane penetration of nanoparticles (NPs) promises an effective pathway for cargo delivery into cells, and offers the possibility of organelle-specific targeting for biomedical applications. However, a full understanding of the underlying NP-membrane interaction mechanism is still lacking. In this work, the membrane penetration behavior of NPs is statistically analyzed based on the simulations of over 2.2 ms, which are performed with dissipative particle dynamics (DPD). Influences from multiple factors including the NP concentration, shape and surface chemistry are taken into account. It is interesting to find that, the introduction of a partner NP would greatly facilitate the transmembrane penetration of a host spherical NP. This is probably due to the membrane-mediated cooperation between the NPs. Moreover, the proper selection of a partner NP with specific surface chemistry is of great significance. For example, the best partner for a hydrophilic NP to achieve transmembrane penetration is a Janus-like one, in comparison with the hydrophilic, hydrophobic or randomly surface-decorated NPs. Furthermore, such a partner-facilitating effect in NP translocation also works for a shaped NP although less pronounced. Our results are helpful for a better understanding of the complicated nano-bio interactions, and offer a practical guide to the NP-based drug delivery strategy with high efficiency.

Scanning Techniques for Nanobioconjugates of Carbon Nanotubes

Nanobioconjugates using carbon nanotubes (CNTs) are attractive and promising hybrid materials. Various biological applications using the CNT nanobioconjugates, for example, drug delivery systems and nanobiosensors, have been proposed by many authors. Scanning techniques such as scanning electron microscopy (SEM) and scanning probe microscopy (SPM) have advantages to characterize the CNT nanobioconjugates under various conditions, for example, isolated conjugates, conjugates in thin films, and conjugates in living cells. In this review article, almost 300 papers are categorized based on types of CNT applications, and various scanning data are introduced to illuminate merits of scanning techniques.

Nanowire lasers as intracellular probes

We investigate a cadmium sulfide (CdS) nanowire (NW) laser that is spontaneously internalized into a single cell to serve as a stand-alone intracellular probe. By pumping with nano-joule light pulses, green laser emission (500-520 nm) can be observed inside cells with a peak linewidth as narrow as 0.5 nm. Due to the sub-micron diameter (∼200 nm), the NW has an appreciable fraction of the evanescent field outside, facilitating a sensitive detection of cellular environmental changes. By monitoring the lasing peak wavelength shift in response to the intracellular refractive index change, our NW laser probe shows a sensitivity of 55 nm per RIU (refractive index units) and a figure of merit of approximately 98.

The Role of Membrane Curvature in Nanoscale Topography-Induced Intracellular Signaling

Over the past decade, there has been growing interest in developing biosensors and devices with nanoscale and vertical topography. Vertical nanostructures induce spontaneous cell engulfment, which enhances the cell-probe coupling efficiency and the sensitivity of biosensors. Although local membranes in contact with the nanostructures are found to be fully fluidic for lipid and membrane protein diffusions, cells appear to actively sense and respond to the surface topography presented by vertical nanostructures. For future development of biodevices, it is important to understand how cells interact with these nanostructures and how their presence modulates cellular function and activities. How cells recognize nanoscale surface topography has been an area of active research for two decades before the recent biosensor works. Extensive studies show that surface topographies in the range of tens to hundreds of nanometers can significantly affect cell functions, behaviors, and ultimately the cell fate. For example, titanium implants having rough surfaces are better for osteoblast attachment and host-implant integration than those with smooth surfaces. At the cellular level, nanoscale surface topography has been shown by a large number of studies to modulate cell attachment, activity, and differentiation. However, a mechanistic understanding of how cells interact and respond to nanoscale topographic features is still lacking. In this Account, we focus on some recent studies that support a new mechanism that local membrane curvature induced by nanoscale topography directly acts as a biochemical signal to induce intracellular signaling, which we refer to as the curvature hypothesis. The curvature hypothesis proposes that some intracellular proteins can recognize membrane curvatures of a certain range at the cell-to-material interface. These proteins then recruit and activate downstream components to modulate cell signaling and behavior. We discuss current technologies allowing the visualization of membrane deformation at the cell membrane-to-substrate interface with nanometer precision and demonstrate that vertical nanostructures induce local curvatures on the plasma membrane. These local curvatures enhance the process of clathrin-mediated endocytosis and affect actin dynamics. We also present evidence that vertical nanostructures can induce significant deformation of the nuclear membrane, which can affect chromatin distribution and gene expression. Finally, we provide a brief perspective on the curvature hypothesis and the challenges and opportunities for the design of nanotopography for manipulating cell behavior.

Nanoparticle-Cell Interaction: A Cell Mechanics Perspective

Progress in the field of nanoparticles has enabled the rapid development of multiple products and technologies; however, some nanoparticles can pose both a threat to the environment and human health. To enable their safe implementation, a comprehensive knowledge of nanoparticles and their biological interactions is needed. In vitro and in vivo toxicity tests have been considered the gold standard to evaluate nanoparticle safety, but it is becoming necessary to understand the impact of nanosystems on cell mechanics. Here, the interaction between particles and cells, from the point of view of cell mechanics (i.e., bionanomechanics), is highlighted and put in perspective. Specifically, the ability of intracellular and extracellular nanoparticles to impair cell adhesion, cytoskeletal organization, stiffness, and migration are discussed. Furthermore, the development of cutting-edge, nanotechnology-driven tools based on the use of particles allowing the determination of cell mechanics is emphasized. These include traction force microscopy, colloidal probe atomic force microscopy, optical tweezers, magnetic manipulation, and particle tracking microrheology.

Translocation of Bioactive Molecules through Carbon Nanotubes Embedded in the Lipid Membrane

One of the major challenges of nanomedicine and gene therapy is the effective translocation of drugs and genes across cell membranes. In this study, we describe a systematic procedure that could be useful for efficient drug and gene delivery into the cell. Using fully atomistic molecular dynamics (MD) simulations, we show that molecules of various shapes, sizes, and chemistries can be spontaneously encapsulated in a single-walled carbon nanotube (SWCNT) embedded in a 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC) lipid bilayer, as we have exemplified with dendrimers, asiRNA, ssDNA, and ubiquitin protein. We compute the free energy gain by the molecules upon their entry inside the SWCNT channel to quantify the stability of these molecules inside the channel as well as to understand the spontaneity of the process. The free energy profiles suggest that all molecules can enter the channel without facing any energy barrier but experience a strong energy barrier (≫k_BT) to translocate across the channel. We propose a theoretical model for the estimation of encapsulation and translocation times of the molecules. Whereas the model predicts the encapsulation time to be of the order of few nanoseconds, which match reasonably well with those obtained from the simulations, it predicts the translocation time to be astronomically large for each molecule considered in this study. This eliminates the possibility of passive diffusion of the molecules through the CNT-nanopore spanning across the membrane. To counter this, we put forward a mechanical method of ejecting the encapsulated molecules by pushing them with other free-floating SWCNTs of diameter smaller than the pore diameter. The feasibility of the proposed method is also demonstrated by performing MD simulations. The generic strategy described here should work for other molecules as well and hence could be potentially useful for drug- and gene-delivery applications.

Nanotechnology for Neuroscience: Promising Approaches for Diagnostics, Therapeutics and Brain Activity Mapping

Unlocking the secrets of the brain is a task fraught with complexity and challenge - not least due to the intricacy of the circuits involved. With advancements in the scale and precision of scientific technologies, we are increasingly equipped to explore how these components interact to produce a vast range of outputs that constitute function and disease. Here, an insight is offered into key areas in which the marriage of neuroscience and nanotechnology has revolutionized the industry. The evolution of ever more sophisticated nanomaterials culminates in network-operant functionalized agents. In turn, these materials contribute to novel diagnostic and therapeutic strategies, including drug delivery, neuroprotection, neural regeneration, neuroimaging and neurosurgery. Further, the entrance of nanotechnology into future research arenas including optogenetics, molecular/ion sensing and monitoring, and piezoelectric effects is discussed. Finally, considerations in nanoneurotoxicity, the main barrier to clinical translation, are reviewed, and direction for future perspectives is provided.

Molecular dynamics simulation strategies for designing carbon-nanotube-based targeted drug delivery

The carbon nanotube (CNT)-based target-specific delivery of drugs, or other molecular cargo, has emerged as one of the most promising biomedical applications of nanotechnology. To achieve efficient CNT-based drug delivery, the interactions between the drug, CNT and biomolecular target need to be properly optimized. Recent advances in the computer-aided molecular design tools, in particular molecular dynamics (MD) simulation studies, offer an appropriate low-cost approach for such optimization. This review highlights the various potential MD approaches for the simulation of CNT interactions with cell membranes while emphasizing various methods of cellular internalization and toxicities of CNTs to build new strategies for designing rational CNT-based targeted drug delivery to circumvent the limitations associated with the various clinically available nonspecific therapeutic agents.

Translocation across a self-healing block copolymer membrane

Herein, a membrane prepared from the self-assembly of poly(styrene-co-acrylonitrile)-b-poly(ethylene oxide)-b-poly(styrene-co-acrylonitrile) micelles is found to exhibit translocation of nano-objects dispersed in aqueous solution. With the water flow as a driving force, temporary pores are created in between the micelles to facilitate the passage of nano-objects. These temporary pores close afterwards through a self-healing mechanism. As main results, polystyrene and silica nanoparticles exhibited a selective translocation directly influenced by their size and applied pressure.

Evaluation of the immunological profile of antibody-functionalized metal-filled single-walled carbon nanocapsules for targeted radiotherapy

This study investigates the immune responses induced by metal-filled single-walled carbon nanotubes (SWCNT) under in vitro, ex vivo and in vivo settings. Either empty amino-functionalized CNTs [SWCNT-NH2 (1)] or samarium chloride-filled amino-functionalized CNTs with [SmCl3@SWCNT-mAb (3)] or without [SmCl3@SWCNT-NH2 (2)] Cetuximab functionalization were tested. Conjugates were added to RAW 264.7 or PBMC cells in a range of 1 μg/ml to 100 μg/ml for 24 h. Cell viability and IL-6/TNFα production were determined by flow cytometry and ELISA. Additionally, the effect of SWCNTs on the number of T lymphocytes, B lymphocytes and monocytes within the PBMC subpopulations was evaluated by immunostaining and flow cytometry. The effect on monocyte number in living mice was assessed after tail vein injection (150 μg of each conjugate per mouse) at 1, 7 and 13 days post-injection. Overall, our study showed that all the conjugates had no significant effect on cell viability of RAW 264.7 but conjugates 1 and 3 led to a slight increase in IL-6/TNFα. All the conjugates resulted in significant reduction in monocyte/macrophage cell numbers within PBMCs in a dose-dependent manner. Interestingly, monocyte depletion was not observed in vivo, suggesting their suitability for future testing in the field of targeted radiotherapy in mice.

Survival rate of eukaryotic cells following electrophoretic nanoinjection

Insertion of foreign molecules such as functionalized fluorescent probes, antibodies, or plasmid DNA to living cells requires overcoming the plasma membrane barrier without harming the cell during the staining process. Many techniques such as electroporation, lipofection or microinjection have been developed to overcome the cellular plasma membrane, but they all result in reduced cell viability. A novel approach is the injection of cells with a nanopipette and using electrophoretic forces for the delivery of molecules. The tip size of these pipettes is approximately ten times smaller than typical microinjection pipettes and rather than pressure pulses as delivery method, moderate DC electric fields are used to drive charged molecules out of the tip. Here, we show that this approach leads to a significantly higher survival rate of nanoinjected cells and that injection with nanopipettes has a significantly lower impact on the proliferation behavior of injected cells. Thus, we propose that injection with nanopipettes using electrophoretic delivery is an excellent alternative when working with valuable and rare living cells, such as primary cells or stem cells.

Manipulation and Immobilization of a Single Fluorescence Nanosensor for Selective Injection into Cells

Manipulation and injection of single nanosensors with high cell viability is an emerging field in cell analysis. We propose a new method using fluorescence nanosensors with a glass nanoprobe and optical control of the zeta potential. The nanosensor is fabricated by encapsulating a fluorescence polystyrene nanobead into a lipid layer with 1,3,3-trimethylindolino-6'-nitrobenzopyrylospiran (SP), which is a photochromic material. The nanobead contains iron oxide nanoparticles and a temperature-sensitive fluorescent dye, Rhodamine B. The zeta potential of the nanosensor switches between negative and positive by photo-isomerization of SP with ultraviolet irradiation. The positively-charged nanosensor easily adheres to a negatively-charged glass nanoprobe, is transported to a target cell, and then adheres to the negatively-charged cell membrane. The nanosensor is then injected into the cytoplasm by heating with a near-infrared (NIR) laser. As a demonstration, a single 750 nm nanosensor was picked-up using a glass nanoprobe with optical control of the zeta potential. Then, the nanosensor was transported and immobilized onto a target cell membrane. Finally, it was injected into the cytoplasm using a NIR laser. The success rates of pick-up and cell immobilization of the nanosensor were 75% and 64%, respectively. Cell injection and cell survival rates were 80% and 100%, respectively.

Subcellular and in-vivo Nano-Endoscopy

Analysis of individual cells at the subcellular level is important for understanding diseases and accelerating drug discovery. Nanoscale endoscopes allow minimally invasive probing of individual cell interiors. Several such instruments have been presented previously, but they are either too complex to fabricate or require sophisticated external detectors because of low signal collection efficiency. Here we present a nanoendoscope that can locally excite fluorescence in labelled cell organelles and collect the emitted signal for spectral analysis. Finite Difference Time Domain (FDTD) simulations have shown that with an optimized nanoendoscope taper profile, the light emission and collection was localized within ~100 nm. This allows signal detection to be used for nano-photonic sensing of the proximity of fluorophores. Upon insertion into the individual organelles of living cells, the nanoendoscope was fabricated and resultant fluorescent signals collected. This included the signal collection from the nucleus of Acridine orange labelled human fibroblast cells, the nucleus of Hoechst stained live liver cells and the mitochondria of MitoTracker Red labelled MDA-MB-231 cells. The endoscope was also inserted into a live organism, the yellow fluorescent protein producing nematode Caenorhabditis elegans, and a fluorescent signal was collected. To our knowledge this is the first demonstration of in vivo, local fluorescence signal collection on the sub-organelle level.

Intracellular delivery of molecules using microfabricated nanoneedle arrays

Many bioactive molecules have intracellular targets, but have difficulty crossing the cell membrane to reach those targets. To address this difficulty, we fabricated arrays of nanoneedles to gently and simultaneously puncture 10(5) cells and thereby provide transient pathways for transport of molecules into the cells. The nanoneedles were microfabricated by etching silicon to create arrays of nanoneedles measuring 12 μm in height, tapering to a sharp tip less than 30 nm wide to facilitate puncture into cells and spaced 10 μm apart in order to have at least one nanoneedle puncture each cell in a confluent monolayer. These nanoneedles were used for intracellular delivery in two ways: puncture loading, in which nanoneedle arrays were pressed into cell monolayers, and centrifuge loading, in which cells in suspension were spun down onto nanoneedle arrays. The effects on intracellular uptake and cell viability were determined as a function of nanoneedle length and sharpness, puncture force and duration, and molecular weight of the molecule delivered. Under optimal conditions, intracellular uptake was seen in approximately 50 % of cells while maintaining high cell viability. Overall, this study provides a comparative analysis of intracellular delivery using nanoneedle arrays by two different loading methods over a range of operating parameters.

Knowledge gaps between nanotoxicological research and nanomaterial safety

With the wide research and application of nanomaterials in various fields, the safety of nanomaterials attracts much attention. An increasing number of reports in the literature have shown the adverse effects of nanomaterials, representing the quick development of nanotoxicology. However, many studies in nanotoxicology have not reflected the real nanomaterial safety, and the knowledge gaps between nanotoxicological research and nanomaterial safety remain large. Considering the remarkable influence of biological or environmental matrices (e.g., biological corona) on nanotoxicity, the situation of performing nanotoxicological experiments should be relevant to the environment and humans. Given the possibility of long-term and low-concentration exposure of nanomaterials, the reversibility of and adaptation to nanotoxicity, and the transgenerational effects should not be ignored. Different from common pollutants, the specific analysis methodology for nanotoxicology need development and exploration furthermore. High-throughput assay integrating with omics was highlighted in the present review to globally investigate nanotoxicity. In addition, the biological responses beyond individual levels, special mechanisms and control of nanotoxicity deserve more attention. The progress of nanotoxicology has been reviewed by previous articles. This review focuses on the blind spots in nanotoxicological research and provides insight into what we should do in future work to support the healthy development of nanotechnology and the evaluation of real nanomaterial safety.