Multiple functional domains of the heparin molecule

Unfractionated heparin and the activated clotting time in non-cardiac arterial procedures

INTRODUCTION

Unfractionated heparin is administered during non-cardiac arterial procedures (NCAP) to prevent thromboembolic complications. In order to achieve a safe level of anticoagulation, the effect of heparin can be measured. The aim of this review was to provide an overview on what is known about heparin, suggested tests to monitor the effect of heparin, including the activated clotting time (ACT), and the factors that could influence that ACT.

EVIDENCE ACQUISITION

A literature search in PubMed was performed. Articles reporting on heparin, clotting time tests (including thrombin time, activated partial thromboplastin time, anti-activated factor X and ACT), and ACT measurement devices were selected.

EVIDENCE SYNTHESIS

Heparin has a non-predictable effect in the individual patient, which could be measured using the ACT. However, ACT values can be influenced by many factors, such as hemodilution, hypothermia and thrombocytopenia. In addition, a high variation in ACT outcomes is found between measurement devices of different brands. In the sparse literature on the role of ACT during NCAP, no consensus has been reached on optimal target ACT values. An ACT >250 seconds leads to more bleeding complications. Females have a longer ACT after heparin administration, with a higher risk of bleeding complications.

CONCLUSIONS

The effect of heparin is unpredictable. ACT can be used to monitor the effect of heparin and achieve individualized anticoagulation, tailored to the patient and the specifics of the operative procedure. However, the ACT itself can be affected by several factors and caution must be present, as measured ACT values differ between measurement devices.

A Model for Surface-Dependent Factor XII Activation: The Roles of Factor XII Heavy Chain Domains

The FXII EGF1 domain promotes surface binding, FXII activation on surfaces, and FXIIa activation of prekallikrein on surfaces.

The FXII FN2 and KNG domains are part of a mechanism that restricts FXII activation in the absence of a surface.

Factor XII (FXII) is the zymogen of a plasma protease (FXIIa) that contributes to bradykinin generation by converting prekallikrein to the protease plasma kallikrein (PKa). FXII conversion to FXIIa by autocatalysis or PKa-mediated cleavage is enhanced when the protein binds to negatively charged surfaces such as polymeric orthophosphate. FXII is composed of noncatalytic (heavy chain) and catalytic (light chain) regions. The heavy chain promotes FXII surface-binding and surface-dependent activation but restricts activation when FXII is not surface bound. From the N terminus, the heavy chain contains fibronectin type 2 (FN2), epidermal growth factor-1 (EGF1), fibronectin type 1 (FN1), EGF2, and kringle (KNG) domains and a proline-rich region. It shares this organization with its homolog, pro–hepatocyte growth factor activator (Pro-HGFA). To study the importance of heavy chain domains in FXII function, we prepared FXII with replacements of each domain with corresponding Pro-HGFA domains and tested them in activation and activity assays. EGF1 is required for surface-dependent FXII autoactivation and surface-dependent prekallikrein activation by FXIIa. KNG and FN2 are important for limiting FXII activation in the absence of a surface by a process that may require interactions between a lysine/arginine binding site on KNG and basic residues elsewhere on FXII. This interaction is disrupted by the lysine analog ε-aminocaproic acid. A model is proposed in which an ε-aminocaproic acid–sensitive interaction between the KNG and FN2 domains maintains FXII in a conformation that restricts activation. Upon binding to a surface through EGF1, the KNG/FN2-dependent mechanism is inactivated, exposing the FXII activation cleavage site.

Sulfated poly-amido-saccharides (sulPASs) are anticoagulants in vitro and in vivo

Anticoagulant therapeutics are a mainstay of modern surgery and of clotting disorder management such as venous thrombosis, yet performance and supply limitations exist for the most widely used agent - heparin. Herein we report the first synthesis, characterization, and performance of sulfated poly-amido-saccharides (sulPASs) as heparin mimetics. sulPASs inhibit the intrinsic pathway of coagulation, specifically FXa and FXIa, as revealed by ex vivo human plasma clotting assays and serine protease inhibition assays. sulPASs activity positively correlates with molecular weight and degree of sulfation. Importantly, sulPASs are not degraded by heparanases and are non-hemolytic. In addition, their activity is reversed by protamine sulfate, unlike small molecule anticoagulants. In an in vivo murine model, sulPASs extend clotting time in a dose dependent manner with bleeding risk comparable to heparin. These findings support continued development of synthetic anticoagulants to address the clinical risks and shortages associated with heparin.

A multi-responsive supramolecular heparin-based biohybrid metallogel constructed by controlled self-assembly based on metal–ligand, host–guest and electrostatic interactions

A new family of supramolecular heparin-based biohybrid metallogels with multiple stimuli-responsive behaviours was constructed through the controlled self-assembly based on three orthogonal interactions within a single system.

Coagulopathy, thromboembolic complications, and the use of heparin in COVID-19 pneumonia

The SARS-CoV-2 (COVID-19) is causing a pandemic and potentially fatal disease of global public health concern. Viral infections are known to be associated with coagulation impairment; thus, thrombosis, hemorrhage, or both may occur. Understanding the pathophysiologic mechanisms underlying the development of coagulation disorders during viral infection is essential for the development of therapeutic strategies. Coagulopathy in COVID-19 infection is emerging as a precipitant factor for severe respiratory complications and death. An increase in coagulation markers, such as fibrinogen and D-dimer, has been found in severe COVID-19 cases. Heparin, clinically used as an anticoagulant, also has anti-inflammatory properties, including binding of inflammatory cytokines, inhibition of neutrophil chemotaxis, and protection of endothelial cells, and a potential antiviral effect. We hypothesized that low-molecular-weight heparin may attenuate cytokine storm in COVID-19 patients; therefore, low-molecular-weight heparin could be a valid adjunctive therapeutic drug for the treatment of COVID-19 pneumopathy. In this paper, we review potential mechanisms involved in coagulation impairment after viral infection and the possible role of heparin in the treatment of COVID-19 patients.

Recent developments in the construction of metallacycle/metallacage-cored supramolecular polymers via hierarchical self-assembly

Supramolecular polymers have received considerable attention during the last few decades due to their scientific value in polymer chemistry and profound implications for future developments of advanced materials. Discrete supramolecular coordination complexes (SCCs) with well-defined size, shape, and geometry have been widely employed to construct hierarchical systems by coordination-driven self-assembly with the spontaneous formation of metal-ligand bonds, which results in the formation of well-defined two-dimensional (2D) metallacycles or three-dimensional (3D) metallacages with high functionalities. The incorporation of discrete SCCs into supramolecular polymers by the orthogonal combination of metal-ligand coordination and other noncovalent interactions or covalent bonding could further facilitate the construction of novel supramolecular polymers with hierarchical architectures and multiple functions including controllable uptake and release of guest molecules, providing a flexible platform for the development of smart materials. In this review, the recent progress in metallacycle/metallacage-cored supramolecular polymers that were constructed by the combination of metal-ligand interactions and other orthogonal interactions (including hydrophobic or hydrophilic interactions, hydrogen bonding, van der Waals forces, π-π stacking, electrostatic interactions, host-guest interactions and covalent bonding) has been discussed. In addition, the potential applications of metallacycle/metallacage-cored supramolecular polymers in the areas of light emitting, sensing, bio-imaging, delivery and release, etc., are also presented.

Construction of Stimuli-Responsive Functional Materials via Hierarchical Self-Assembly Involving Coordination Interactions

Supramolecular self-assembly, which creates the ordered structures as a result of spontaneous organization of building blocks driven by noncovalent interactions (NCIs), is ubiquitous in nature. Recently, it has become increasingly clear that nature often builds up complex structures by employing a hierarchical self-assembly (HSA) strategy, in which the components are brought together in a stepwise process via multiple NCIs. Inspired by the dedicated biological structures in nature, HSA has been widely explored to construct well-defined assemblies with increasing complexity. The employment of direct metal-ligand bonds to drive the formation of discrete metallosupramolecular architectures has proven to be a highly efficient strategy to prepare structurally diverse architectures like two-dimensional (2-D) polygons and three-dimensional (3-D) polyhedra with well-defined shapes, sizes, and geometries. Such well-defined organometallic assemblies provide an ideal platform for designing novel artificial supramolecular systems with the increasing complexity though HSA. The presence of a well-defined organometallic scaffold brings an additional dimension to the final nanoscale structures. Moreover, the multilevel dynamic nature of hierarchical self-assemblies brings more structural and functional possibilities of resultant supramolecular systems. This Account will focus on our recent advance on construction of stimuli-responsive functional materials through HSA involving coordination interactions. In our study, a series of functionalized metallacycles were first constructed through coordination-driven self-assembly (CDSA). Then, the secondary noncovalent interaction sites were integrated within the functionalized metallacycle system via either preassembly or postassembly approach. Different segments, such as alkyl chains, dendrimers, cholesteryl moiety, covalent macrocycles, and even polymeric fragments, which could provide hydrophobic and hydrophilic interactions, van der Waals forces, hydrogen bonding, CH-π and π-π interactions, and host-guest interactions, have been utilized to provide the secondary NCIs. Further self-assembly of functionalized metallacycles gives rise to the formation of complex higher-order structures driven by other NCIs by taking advantages of orthogonal property of coordination bonds with other NCIs. By changing the type of additional NCIs embodied in building blocks, different supramolecular architectures, such as the ordered nanostructures, supramolecular polymers and gels, fluorescent materials and sensors, have been successfully prepared with the tailored chemical and physical properties. In particular, the dynamic nature of coordination bonds as well as other NCIs endows final assemblies with stimuli-responsive functions. Collectively, our studies suggest that combining coordination and other NCIs in a well-defined and precise manner is a highly efficient strategy to achieve the complex architectures and functional materials. Therefore, it is very promising to develop the desired functional materials with high precision and fidelity by employing HSA involving coordination interactions.

Heparin mimetics with anticoagulant activity

Heparin, a sulfated polysaccharide belonging to the glycosaminoglycan family, has been widely used as an anticoagulant drug for decades and remains the most commonly used parenteral anticoagulant in adults and children. However, heparin has important clinical limitations and is derived from animal sources which pose significant safety and supply problems. The ever growing shortage of the raw material for heparin manufacturing may become a very significant issue in the future. These global limitations have prompted much research, especially following the recent well-publicized contamination scandal, into the development of alternative anticoagulants derived from non-animal and/or totally synthetic sources that mimic the structural features and properties of heparin. Such compounds, termed heparin mimetics, are also needed as anticoagulant materials for use in biomedical applications (e.g., stents, grafts, implants etc.). This review encompasses the development of heparin mimetics of various structural classes, including synthetic polymers and non-carbohydrate small molecules as well as sulfated oligo- and polysaccharides, and fondaparinux derivatives and conjugates, with a focus on developments in the past 10 years.

Photostable and biocompatible AIE-active conjugated polyelectrolytes for efficient heparin detection and specific lysosome labelling

A series of new conjugated polyelectrolytes (CPEs) with emissive tetraphenylethene-containing backbones and specific targeting pendants are synthesized and characterized.

Heparin: Past, Present, and Future

Heparin, the most widely used anticoagulant drug in the world today, remains an animal-derived product with the attendant risks of adulteration and contamination. A contamination crisis in 2007-2008 increased the impetus to provide non-animal-derived sources of heparin, produced under cGMP conditions. In addition, recent studies suggest that heparin may have significant antineoplastic activity, separate and distinct from its anticoagulant activity, while other studies indicate a role for heparin in treating inflammation, infertility, and infectious disease. A variety of strategies have been proposed to produce a bioengineered heparin. In this review, we discuss several of these strategies including microbial production, mammalian cell production, and chemoenzymatic modification. We also propose strategies for creating "designer" heparins and heparan-sulfates with various biochemical and physiological properties.

Structural glycobiology of heparin dynamics on the exosite 2 of coagulation cascade proteases: Implications for glycosaminoglycans antithrombotic activity

fIIa and fXa are two of the main targets of antithrombin, a serine proteases inhibitor that plays a major role in the regulation of blood clotting. The formation of ternary complexes between such molecules and glycosaminoglycans, as heparin, is the main path for inhibiting those enzymes, which may occur through two distinct mechanisms of action. While these serine proteases present distinct susceptibilities to these paths, in which fIIa demands an interaction with heparin, neither the molecular basis of this differential inhibition nor the role of fIIa glycosylation on this process is fully understood. Thus, the present work evaluated through molecular dynamics simulations the effects of glycosylation on fIIa and the consequences of heparin binding to both proteases function and dynamics. Based on the obtained data, fIIa N-linked glycan promoted an increase in the active site pocket size by stabilizing regions that encircle it, while heparin binding was observed to reverse such an effect. Additionally, heparin orientation observed on the surface of fIIa, but not fXa, allows a linear long-chain heparin binding to antithrombin in ternary complexes. Finally, the enzymes catalytic triad organization was disrupted due to a strong glycosaminoglycan binding to the proteases exosite 2. Such data support an atomic-level explanation for the higher inhibition constant of the antithrombin-heparin complex over fIIa than fXa, as well as for the different susceptibilities of those enzymes for antithrombin mechanisms of action.

Review article: heparin sensitivity and resistance: management during cardiopulmonary bypass

Heparin resistance during cardiac surgery is defined as the inability of an adequate heparin dose to increase the activated clotting time (ACT) to the desired level. Failure to attain the target ACT raises concerns that the patient is not fully anticoagulated and initiating cardiopulmonary bypass may result in excessive activation of the hemostatic system. Although antithrombin deficiency has generally been thought to be the primary mechanism of heparin resistance, the reasons for heparin resistance are both complex and multifactorial. Furthermore, the ACT is not specific to heparin's anticoagulant effect and is affected by multiple variables that are commonly present during cardiac surgery. Due to these many variables, it remains unclear whether decreased heparin responsiveness as measured by the ACT represents inadequate anticoagulation. Nevertheless, many clinicians choose a target ACT to assess anticoagulation, and interventions aimed at achieving the target ACT are routinely performed in the setting of heparin resistance. Treatments for heparin resistance/alterations in heparin responsiveness include additional heparin or antithrombin supplementation. In this review, we discuss the variability of heparin potency, heparin responsiveness as measured by the ACT, and the current management of heparin resistance.

Chemoenzymatic synthesis of heparin oligosaccharides with both anti-factor Xa and anti-factor IIa activities

Heparan sulfate (HS) and heparin are highly sulfated polysaccharides. Heparin is a commonly used anticoagulant drug that inhibits the activities of factors Xa and IIa (also known as thrombin) to prevent blood clot formation. Here, we report the synthesis of a series of size-defined oligosaccharides to probe the minimum size requirement for an oligosaccharide with anti-IIa activity. The synthesis was completed by a chemoenzymatic approach involving glycosyltransferases, HS sulfotransferases, and C(5)-epimerase. We demonstrate the ability to synthesize highly purified N-sulfo-oligosaccharides having up to 21 saccharide residues. The results from anti-Xa and anti-IIa activity measurements revealed that an oligosaccharide longer than 19 saccharide residues is necessary to display anti-IIa activity. The oligosaccharides also exhibit low binding toward platelet factor 4, raising the possibility of preparing a synthetic heparin with a reduced effect of heparin-induced thrombocytopenia. The results from this study demonstrate the ability to synthesize large HS oligosaccharides and provide a unique tool to probe the structure and function relationships of HS that require the use of large HS fragments.

Parenteral anticoagulants: Antithrombotic Therapy and Prevention of Thrombosis, 9th ed: American College of Chest Physicians Evidence-Based Clinical Practice Guidelines

This article describes the pharmacology of approved parenteral anticoagulants. These include the indirect anticoagulants, unfractionated heparin (UFH), low-molecular-weight heparins (LMWHs), fondaparinux, and danaparoid, as well as the direct thrombin inhibitors hirudin, bivalirudin, and argatroban. UFH is a heterogeneous mixture of glycosaminoglycans that bind to antithrombin via a unique pentasaccharide sequence and catalyze the inactivation of thrombin, factor Xa, and other clotting enzymes. Heparin also binds to cells and plasma proteins other than antithrombin causing unpredictable pharmacokinetic and pharmacodynamic properties and triggering nonhemorrhagic side effects, such as heparin-induced thrombocytopenia (HIT) and osteoporosis. LMWHs have greater inhibitory activity against factor Xa than thrombin and exhibit less binding to cells and plasma proteins than heparin. Consequently, LMWH preparations have more predictable pharmacokinetic and pharmacodynamic properties, have a longer half-life than heparin, and are associated with a lower risk of nonhemorrhagic side effects. LMWHs can be administered once daily or bid by subcutaneous injection, without coagulation monitoring. Based on their greater convenience, LMWHs have replaced UFH for many clinical indications. Fondaparinux, a synthetic pentasaccharide, catalyzes the inhibition of factor Xa, but not thrombin, in an antithrombin-dependent fashion. Fondaparinux binds only to antithrombin. Therefore, fondaparinux-associated HIT or osteoporosis is unlikely to occur. Fondaparinux exhibits complete bioavailability when administered subcutaneously, has a longer half-life than LMWHs, and is given once daily by subcutaneous injection in fixed doses, without coagulation monitoring. Three additional parenteral direct thrombin inhibitors and danaparoid are approved as alternatives to heparin in patients with HIT.

A peptide found by phage display discriminates a specific structure of a trisaccharide in heparin

A number of recent studies have shown that heparan sulfate can control several important biological events on the cell surface through changes in sulfation pattern. The in vivo modification of sugar chains with sulfates, however, is complicated, and the discrimination of different sulfation patterns is difficult. Heparin, which is primarily produced by mast cells, is closely approximated by the structural analog heparan sulfate. Screening of heparin-associating peptides using phage display and antithrombin-bound affinity chromatography identified a peptide, heparin-associating peptide Y (HappY), that acts as a target of immobilized heparin. The peptide consists of 12 amino acid residues with characteristic three arginines and exclusively binds to heparin and heparan sulfate but does not associate with other glycosaminoglycans. HappY recognizes three consecutive monosaccharide residues in heparin through its three arginine residues. HappY should be a useful probe to detect heparin and heparan sulfate in studies of glycobiology.

[Orthopedic patients with or without thrombophilia. Diagnostic, therapy and peri-operative strategies]

Venous thrombosis and pulmonary embolisms are currently associated with high mortality rates in Europe as well as in the United States (mortality rate >300,000-500,000/year). The highest risk is attributed to orthopedic surgery. Besides the use of antithrombotic agents, surgical and anesthesiological procedures as well as a multitude of trigger mechanisms, many thrombophilic risk conditions have to be considered. The incidence of thrombotic complications could be continuously reduced by the improvement of different antithrombotic strategies and use of drugs. According to national and international guidelines low molecular weight heparins and fondaparinux (besides aPTT adjusted strategies by using unfractionated heparin) are mainly indicated in high risk patients undergoing hip and knee surgery.The use of newly developed anti-IIa and anti-Xa inhibitors (e.g. dabigatran etexilate, rivaroxaban) is not yet established in guidelines. The discovery of pentasaccharide has further improved the antithrombotic efficiency, but it is still unknown how to manage patients with thrombophilia. Otherwise the knowledge of thrombophilia is not mandatory to know how to manage high risk patients. In contrast information on a history of thrombotic complications as well as indications gained from the family history are of great importance. Whether and to what extent, which patients with or without thrombophilic disposition, under which conditions from which medication within an anti-coagulation prophylaxis profit most over which time period, will be of future interest. Fundamentally, the age of the patient as well as liver and kidney function values and possible interactions between medications must be taken into consideration for selection of individual anti-thrombotic drugs. Even prolongation of medical immobilization prophylaxis can lead to accumulative risks, such as heparin-induced thrombocytopenia, the risk of which grows with increased exposition to the triggering agent.

Carbohydrate post-glycosylational modifications

Carbohydrate modification is a common phenomenon in nature. Many carbohydrate modifications such as some epimerization, O-acetylation, O-sulfation, O-methylation, N-deacetylation, and N-sulfation, take place after the formation of oligosaccharide or polysaccharide backbones. These modifications can be categorized as carbohydrate post-glycosylational modifications (PGMs). Carbohydrate PGMs further extend the complexity of the structures and the synthesis of carbohydrates and glycoconjugates. They also increase the capacity of the biological regulation that is achieved by finely tuning the structures of carbohydrates. Developing efficient methods to obtain structurally defined naturally occurring oligosaccharides, polysaccharides, and glycoconjugates with carbohydrate PGMs is essential for understanding the biological significance of carbohydrate PGMs. Combined with high-throughput screening methods, synthetic carbohydrates with PGMs are invaluable probes in structure-activity relationship studies. We illustrate here several classes of carbohydrates with PGMs and their applications. Recent progress in chemical, enzymatic, and chemoenzymatic syntheses of these carbohydrates and their derivatives are also presented.

Anticoagulant heparan sulfate: structural specificity and biosynthesis

Heparan sulfate (HS) is present on the surface of endothelial and surrounding tissues in large quantities. It plays important roles in regulating numerous functions of the blood vessel wall, including blood coagulation, inflammation response, and cell differentiation. HS is a highly sulfated polysaccharide containing glucosamine and glucuronic/iduronic acid repeating disaccharide units. The unique sulfated saccharide sequences of HS determine its specific functions. Heparin, an analog of HS, is the most commonly used anticoagulant drug. Because of its wide range of biological functions, HS has become an interesting molecule to biochemists, medicinal chemists, and developmental biologists. In this review, we summarize recent progress toward understanding the interaction between HS and blood-coagulating factors, the biosynthesis of anticoagulant HS and the mechanism of action of HS biosynthetic enzymes. Furthermore, knowledge of the biosynthesis of HS facilitates the development of novel enzymatic approaches to synthesize HS from bacterial capsular polysaccharides and to produce polysaccharide end products with high specificity for the biological target. These advancements provide the foundation for the development of polysaccharide-based therapeutic agents.

Heparin and Low-Molecular-Weight Heparin

This article about unfractionated heparin (UFH) and low-molecular-weight heparin (LMWH) is part of the Seventh American College of Chest Physicians Conference on Antithrombotic and Thrombolytic Therapy: Evidence-Based Guidelines. UFH is a heterogeneous mixture of glycosaminoglycans that bind to antithrombin via a pentasaccharide, catalyzing the inactivation of thrombin and other clotting factors. UFH also binds endothelial cells, platelet factor 4, and platelets, leading to rather unpredictable pharmacokinetic and pharmacodynamic properties. Variability in activated partial thromboplastin time (aPTT) reagents necessitates site-specific validation of the aPTT therapeutic range in order to properly monitor UFH therapy. Lack of validation has been an oversight in many clinical trials comparing UFH to LMWH. In patients with apparent heparin resistance, anti-factor Xa monitoring may be superior to measurement of aPTT. LMWHs lack the nonspecific binding affinities of UFH, and, as a result, LMWH preparations have more predictable pharmacokinetic and pharmacodynamic properties. LMWHs have replaced UFH for most clinical indications for the following reasons: (1) these properties allow LMWHs to be administered subcutaneously, once daily without laboratory monitoring; and (2) the evidence from clinical trials that LMWH is as least as effective as and is safer than UFH. Several clinical issues regarding the use of LMWHs remain unanswered. These relate to the need for monitoring with an anti-factor Xa assay in patients with severe obesity or renal insufficiency. The therapeutic range for anti-factor Xa activity depends on the dosing interval. Anti-factor Xa monitoring is prudent when administering weight-based doses of LMWH to patients who weigh > 150 kg. It has been determined that UFH infusion is preferable to LMWH injection in patients with creatinine clearance of < 25 mL/min, until further data on therapeutic dosing of LMWHs in renal failure have been published. However, when administered in low doses prophylactically, LMWH is safe for therapy in patients with renal failure. Protamine may help to reverse bleeding related to LWMH, although anti-factor Xa activity is not fully normalized by protamine. The synthetic pentasaccharide fondaparinux is a promising new antithrombotic agent for the prevention and treatment of venous thromboembolism.

Anticoagulation therapy in children

Thromboembolic disease (TED) is increasingly recognized as a major cause of morbidity and mortality in tertiary pediatrics. Children younger than 1 year of age and teenage girls are at greatest risk of thromboembolism. Although anticoagulation therapy is the treatment of choice for TED, the treatment strategy is often difficult, especially in children. Treatment relies largely on anticoagulation with heparin and warfarin. Recommendations for antithrombotic therapy in children have been loosely extrapolated from recommendations for adults; however, it is likely that optimal treatment of children with TED differs from adults because of important ontogenic features of hemostasis that affect both the pathophysiology of the thrombotic processes and the response to antithrombotic agents. Until recently, the primary treatment for TED has been unfractionated heparin (UFH) in conjunction with warfarin. Warfarin, the most commonly used oral anticoagulant, acts through inhibition of the vitamin K-dependent transcarboxylation reactions that convert precursors of clotting factors into their active form. Appropriate use of UFH and warfarin requires close patient monitoring and dosage adjustments to ensure tolerability and efficacy. In recent years, low molecular weight heparins (LMWH) have become available as alternatives to UFH and warfarin, for both the prevention and treatment of TED. Potentially, LMWH have significant advantages. They have superior pharmacokinetics, which results in minimal laboratory monitoring, offering important benefits to children with poor venous access. Based on available data, LMWHs are at least as effective and well tolerated as UFH, and are more convenient. Although LMWHs are more expensive than UFH, the expense is likely to be offset by savings from a reduced hospital stay.

Factor X inhibitors

Factor X plays a central role in coagulation, being the point of convergence of the extrinsic and intrinsic pathways of blood clotting. It may also act as one of the links between the coagulation and inflammatory pathways. These findings suggest that factor X may represent an attractive target for a new antithrombotic drug. Indeed, a factor X inhibitor, fondaparinux, has already been approved for clinical use to prevent post-operative deep vein thrombosis. Factor X inhibitors are also being evaluated for use in the treatment of the acute coronary syndromes, pulmonary embolism and deep vein thrombosis. Oral factor X inhibitors are also being developed, which may be of use in the outpatient prevention and/or treatment of stroke and thromboembolism.

The effect of ozagrel sodium on photochemical thrombosis in rat: therapeutic window and combined therapy with heparin sodium

The therapeutic efficacy of ozagrel sodium (ozagrel), alone and in combination with heparin, and its therapeutic time window were studied in a photochemically induced thrombotic cerebral infarction rat model. Cerebral artery thrombosis was induced by irradiating the brain with green light through intact skull using rose bengal as the photosensitizing dye. One set of animals was treated immediately after thrombosis with (1) vehicle, (2) 10 mg/kg ozagrel in saline, intravenously (i.v.), (3) 150 U/kg unfractioned heparin, subcutaneously (s.c.), or (4) ozagrel, i.v. plus heparin, s.c. Infarct volume was significantly smaller and edema was reduced in the ozagrel-treated groups compared to the vehicle-treated group; heparin did not convey additional benefit. In another set of animals, rats were given either vehicle or 10 mg/kg ozagrel in saline, i.v., 60 min or 120 min after induction of thrombosis. Ozagrel reduced infarct volume, but its effect diminished with delayed administration. The therapeutic window was determined to be less than 60 minutes after induction of thrombosis.

In vitro comparison of the effect of heparin, enoxaparin and fondaparinux on tests of coagulation

Low-molecular weight heparin (LMWH) is increasingly used in place of unfractionated heparin (UFH) in patients with unstable angina, and phase II clinical trials using fondaparinux for this indication are underway. Because unstable angina patients often require urgent percutaneous coronary interventions (PCI) or aortocoronary bypass surgery, a point-of-care test is needed to monitor the anticoagulant effect of these agents. The activated clotting time (ACT) and activated partial thromboplastin time (aPTT) are the tests most often used to monitor heparin. The purpose of this in vitro study was to determine whether the ACT or the aPTT can be used to monitor the anticoagulant effect of low-molecular weight heparin and fondaparinux. The ACT and aPTT were measured after heparin, enoxaparin or fondaparinux was added to the blood of healthy volunteers, in doses with equivalent inhibitory activity against activated factor X (factor Xa). To mimic the clinical scenario where an unstable angina patient, who has already received enoxaparin, is urgently taken for PCI or bypass surgery, the ACT was determined after heparin was added to blood containing clinically relevant doses of enoxaparin. We determined that enoxaparin produced significantly less prolongation of both the ACT and the aPTT than heparin, whereas fondaparinux had no effect on either of these tests. Addition of enoxaparin to heparin-containing plasma did not prolong the ACT beyond that produced by heparin alone. The ACT and aPTT therefore cannot be used to monitor low-molecular weight heparin or fondaparinux, highlighting the need for a point-of-care anti-factor Xa assay.

Anticoagulation therapy

Despite refinements and standardization in the use of anticoagulants, many problems remain for clinicians. Dr. Crowther describes appropriate starting and maintenance doses of warfarin, factors accounting for inter- and intra-observer variability and importantly, the management of the over-anticoagulated patients and bleeding patients. Dr. White compares unfractionated heparin (UFH) and low molecular weight heparin (LMWH) and addresses whether there truly are differences in the efficacy and safety of different LMWH's for both arterial and venous indications. Dr. Ortel discusses the management of the problem patient who requires anticoagulants, the management of heparin-induced thrombocytopenia, the pregnant patient, the obese patient, patients who have renal insufficiency and/or liver disease, patients with malignant disease, and other challenging patient populations.

Structure and anticoagulant properties of sulfated glycosaminoglycans from primitive Chordates

Dermatan sulfates and heparin, similar to the mammalian glycosaminoglycans, but with differences in the degree and position of sulfation were previously isolated from the body of the ascidian Styela plicata and Ascidia nigra. These differences produce profound effects on their anticoagulant properties. S. plicata dermatan sulfate composed by 2-O-sulfated alpha-L-iduronic acid and 4-O-sulfated N-acetyl-beta-D-galactosamine residues is a potent anticoagulant due to a high heparin cofactor II activity. Surprisingly, it has a lower potency to prevent thrombus formation on an experimental model and a lower bleeding effect in rats than the mammalian dermatan sulfate. In contrast, A. nigra dermatan sulfate, also enriched in 2-O-sulfated alpha-L-iduronic acid, but in this case sulfated at O-6 of the N-acetyl-beta-D-galactosamine units, has no in vitro or in vivo anticoagulant activity, does not prevent thrombus formation but shows a bleeding effect similar to the mammalian glycosaminoglycan. Ascidian heparin, composed by 2-O-sulfated alpha-L-iduronic acid, N- and 6-O-sulfated glucosamine (75%) and alpha-L-iduronic acid, N- and 6-O-sulfated glucosamine (25%) disaccharide units has an anticoagulant activity 10 times lower than the mammalian heparin, is about 20 times less potent in the inhibition of thrombin by antithrombin, but has the same heparin cofactor II activity as mammalian heparin.

Low molecular weight protamine (LMWP) as nontoxic heparin/low molecular weight heparin antidote (II): in vitro evaluation of efficacy and toxicity

Patients undergoing anticoagulation with heparin or low molecular weight heparin (LMWH) require a superior antidote that possesses more selective biological actions and a better safety profile than protamine. We had previously developed 2 low molecular weight protamine (LMWP) fractions (TDSP4 and TDSP5) from thermolysin-digested protamine as potential nontoxic, heparin-neutralizing agents. In this, the second article in this series, studies focused on in vitro evaluation of heparin/LMWH-neutralizing efficacy and putative toxicity. These LMWP fractions, particularly TDSP5, were effective and fully capable of neutralizing a broad spectrum of heparin-induced anticoagulant activities (ie, aPTT, anti-Xa, and anti-IIa activities). Additionally, these LMWP fractions could neutralize the activities of commercial LMWH. As assessed by the anti-Xa assay, TDSP5 was as effective as, although less potent than, protamine in reversing the activity of Mono-Embolex (molecular weight 5000-7000) and 2 other different sizes (molecular weight of 3000 and 5000 d) of LMWH preparations. Furthermore, compared with protamine, TDSP5 exhibited a much-reduced toxicity and thus an improved safety profile, as reflected by its reduced ability to activate the complement system and cross-react with the antiprotamine antibodies, which are 2 primary indices of protamine toxicity.

Low Molecular Weight Heparin: An Evaluation of Current and Potential Clinical Utility in Surgery

Heparin, a mixture of glycosaminoglycans of various sizes, is a potent natural anticoagulant. Low molecular weight heparins (LMWH) contain only the polymers of smaller size, which appear to possess most of the antithrombotic potential. Pharmacological differences between the two suggest a number of advantages with LMWH therapy. Our objective was to establish the utility of LMWHs in comparison to the current practice of anticoagulation in surgical patients. Articles were obtained through MEDLINE and CURRENT CONTENTS queries. The searches were limited to English and French-language articles and included published overviews containing relevant individual trials. We examined the current literature, consisting of 1,730 published reports from 1979-1998, regarding the biochemistry, pharmacology, physiology, and clinical applications of LMWH in comparison with current therapy. Studies were selected based on their relevance to LMWHs, the size and methods of trials, and their application to clinical care. Peer-reviewed published data were critically evaluated by independent extraction by several authors. Established rules for levels of evidence were used to objectively evaluate the strength of evidence supporting recommendations in each clinical area. LMWHs provide superior anticoagulation in the prophylaxis of DVT following orthopedic, general, and trauma surgery. Further studies should establish which other patients may benefit from such prophylaxis. Current evidence does not support the use of LMWHs in patients with mechanical heart valves or those on mechanical cardiac support devices; however, it may have a role in the maintenance of vascular graft patency. Further studies should examine the role of LMWHs in transplant atherosclerosis, and in patients requiring long-term anticoagulation at high risk for bleeding with warfarin therapy. The economic implications of LMWH administration remain unclear. On the basis of the information presented in this review, LMWHs are promising new agents in prophylaxis and treatment of both arterial and venous thrombosis. In the near future, LMWHs are likely to supplant UFH and perhaps warfarin in many applications.http://link.springer-ny.com/link/service/journals/00547/bibs/8n4p203.html</hea

Assessment through chemical synthesis of the size of the heparin sequence involved in thrombin inhibition

Deca- to eicosasaccharides having the generic structure methyl(sodium 2,3-di-O-methyl-4-O-sodium sulfonato-alpha-L-idopyranosyluronate)-(1-->4)-[(2,3,6-tri-O-sodiu m sulfonato-alpha-D-glucopyranosyl)-(1-->4)-(sodium 2,3-di-O-methyl-alpha-L-idopyranosyluronate)-(1-->4)]n-2,3,6-tri-O-sodiu m sulfonato-alpha-D-glucopyranoside have been synthesized from a single disaccharide precursor. All of them bind to and activate antithrombin. When n < or = 6 only Factor Xa inhibition is observed, whereas when n > 6 Factor Xa and thrombin are both inhibited in the presence of antithrombin. These results indicate that, in heparin, the sequence involved in antithrombin-catalyzed thrombin inhibition is a pentadeca- or a hexadecasaccharide.

Synthesis of thrombin-inhibiting heparin mimetics without side effects

Unwanted side effects of pharmacologically active compounds can usually be eliminated by structural modifications. But the complex heterogeneous structure of the polysaccharide heparin has limited this approach to fragmentation, leading to slightly better-tolerated heparin preparations of low molecular mass. Despite this improvement, heparin-induced thrombocytopaenia (HIT), related to an interaction with platelet factor 4 (PF4) and, to a lesser extent, haemorrhages, remain significant side effects of heparinotherapy. Breakthroughs in oligosaccharide chemistry made possible the total synthesis of the pentasaccharide antithrombin-binding site of heparin. This pentasaccharide represents a new family of potential antithrombotic drugs, devoid of thrombin inhibitory properties, and free of undesired interactions with blood and vessel components. To obtain more potent and well-tolerated antithrombotic drugs, we wished to synthesize heparin mimetics able to inhibit thrombin, that is, longer oligosaccharides. Like thrombin inhibition, undesired interactions are directly correlated to the charge and the size of the molecules, so we had to design structures that were able to discriminate between thrombin and other proteins, particularly PF4. Here we describe the use of multistep converging synthesis to obtain sulphated oligosaccharides that meet these requirements.

Determination of low-molecular-weight heparins and their binding to protamine and a protamine analog using polyion-sensitive membrane electrodes

A polycation-sensitive membrane electrode based on the ion-exchanger dinonylnaphthalene sulfonate has previously been developed and used as an end-point detector for the determination of unfractionated heparin in whole blood samples via simple potentiometric titration with protamine. Herein, we report the application of the same methodology for the quantitation of a commercial low-molecular-weight heparin (LMWH) preparation (Fragmin) in whole blood samples at concentrations up to 2 U/ml. Further, an analogous polyanion (heparin)-sensitive electrode is used to estimate the binding constants between protamine and various LMWH preparations. The equilibrium constants (Keq) and the number of binding sites per mole of heparin (n) are determined by recasting the data in the form of a Scatchard plot. Results show that the average molecular weight and molecular weight distribution of the LMWH preparation are important parameters affecting their binding with protamine. Comparable binding constants are obtained for the same LMWH preparations titrated with a synthetic protamine analog, [+18RGD] [acetyl-EA(R2A2R2A)4R2GRGDSPA-NH2].

Characterization of a heparin binding site on the heavy chain of factor XI

The glycosaminoglycan heparin enhances several reactions involving coagulation factor XI (FXI) including activation of FXI by factor XIIa, thrombin, and autoactivation; and inactivation of activated FXI (FXIa) by serine protease inhibitors. We examined the effect of heparin on inhibition of FXIa by the inhibitors C1-inhibitor (C1-INH) and antithrombin III (ATIII). Second order rate constants for inhibition in the absence of heparin were 1.57 x 10(3) and 0.91 x 10(3) M-1 s-1 for C1-INH and ATIII, respectively. Therapeutic heparin concentrations (0.1-1.0 units/ml) enhanced inhibition by ATIII 20-55-fold compared with 0.1-7.0-fold for C1-INH. For both inhibitors, the effect of heparin over a wide range of concentrations (10(-1) to 10(5) units/ml) produced bell-shaped curves, demonstrating that inhibition occurs by a template mechanism requiring both inhibitor and protease to bind to heparin. This implies that FXI/XIa contains structural elements that interact with heparin. Human FXI contains a sequence of amino acids (R250-I-K-K-S-K) in the apple 3 domain of the heavy chain that binds heparin (Ho, D., Badellino, K., Baglia, F., and Walsh, P. (1998) J. Biol. Chem. 273, 16382-16390). To determine the importance of this sequence to heparin-mediated reactions, recombinant FXI molecules with alanine substitutions for basic amino acids were expressed in 293 fibroblasts, and tested in heparin-dependent assays. Inhibition of FXIa by ATIII in the presence of heparin was decreased 4-fold by alanine substitution at Lys253 (A253), with smaller effects noted for mutants A255 and A252. FXI undergoes autoactivation to FXIa in the presence of heparin. The rate of autoactivation was decreased substantially for A253 with modest decreases for A255 and A252. Substituting all four charged residues in the sequence resulted in a profound decrease in autoactivation, significantly greater than for any single substitution. Relative affinity for heparin was tested by determining the concentration of NaCl required to elute FXIa from heparin-Sepharose. Wild type FXIa eluted from the column at 320 mM NaCl, whereas FXIa with multiple substitutions (A252-254 or A250-255) eluted at 230 mM NaCl. All proteins with single substitutions in charged amino acids eluted at intermediate NaCl concentrations. The data indicate that FXI/XIa must bind to heparin for optimal inhibition by ATIII and for autoactivation. Lys253 is the most important amino acid involved in binding, and Lys255 and Lys252 also have roles in interactions with heparin.

Structure-function relations of heparin-mimetic sulfated xylan oligosaccharides: inhibition of human immunodeficiency virus-1 infectivity in vitro

Heparins/heparan sulfates modulate the function of proteins and cell membranes in numerous biological systems including normal and disease processes in humans. Heparin has been used for many years as an anticoagulant, and anticoagulant heparin-mimetics were developed several decades ago by chemical sulfation of non-mammalian polysaccharides, e.g., an antithrombotic sulfated xylan. This pharmaceutical, which comprises a mixture of sulfated oligoxylans, also mimics most other biological actions of natural heparins in vitro, including inhibition of the human immunodeficiency virus, but the molecular basis for these actions has been unclear. Here, numerous Components of the sulfated oligoxylan mixture were isolated and when bioassayed in the case of anti-HIV-1 infectivity revealed that a structural specificity underlines the capacity of sulfated xylan to inhibit HIV-1, rather than a non-specific mechanism. Components were isolated by chromatographic fractionation through Bio-Gel P10 in 0.5 M ammonium bicarbonate. This fractionation revealed an elution range associated with apparent molecular weights of approximately 22000 to <1500 relative to standard heparin and heparan sulfates and newly prepared sulfated oligosaccharide standards. Components were characterized by metachromatic absorption spectroscopy, ultracentrifugation, GlcA analysis, and potency against HIV-1 infectivity, both in the tetrazolium cytotoxicity assay and in syncytium-forming assays, in CD4-lymphocytes. Structural specificity was indicated by the differential potencies exhibited by the Components: Highest activity (cytotoxicity) was exhibited by Components in the chromatographic region > or = approximately 5500 in mass (50% effective (inhibitory) concentration = 0.5-0.7 microg ml(-1) in the first fractionation series, and 0.1-0.5 microg ml(-1) in a second series). The potency declined sharply below approximately 5400 in mass, but with an exception; a second structure exhibiting relatively high potency eluted among low-mass oligosaccharides which had an average size of approximately a nonomer. Components displayed differential potencies also against the syncytium-forming infectivity of HIV-1. The high potency against syncytium-formation was retained by Components down to a minimum size of about 4500 in mass, smaller than the > or = approximately 5400 required above. One in ten of the beta1,4-linked xyloses in the native xylan are substituted with a monomeric alpha1,2 DGlcA branch. We have speculated that pharmaceutical actions of sulfated xylan might be related to structures involving the alpha-D linked substituents and this was examined using a space-filling model of a sulfated octaxylan and by analyses of Components for GlcA content. Understanding structure/function relations in the heparin-like actions of these agents would be of general significance for the careful examination of their potential clinical usefulness in many human processes modulated by heparins, including AIDS.

Molecular cloning and expression of mouse and human cDNAs encoding heparan sulfate D-glucosaminyl 3-O-sulfotransferase

The cellular rate of anticoagulant heparan sulfate proteoglycan (HSPGact) generation is determined by the level of a kinetically limiting microsomal activity, HSact conversion activity, which is predominantly composed of the long sought heparan sulfate D-glucosaminyl 3-O-sulfotransferase (3-OST) (Shworak, N. W., Fritze, L. M. S., Liu, J., Butler, L. D., and Rosenberg, R. D. (1996) J. Biol. Chem. 271, 27063-27071; Liu, J., Shworak, N. W., Fritze, L. M. S., Edelberg, J. M., and Rosenberg, R. D. (1996) J. Biol. Chem. 271, 27072-27082). Mouse 3-OST cDNAs were isolated by proteolyzing the purified enzyme with Lys-C, sequencing the resultant peptides as well as the existing amino terminus, employing degenerate polymerase chain reaction primers corresponding to the sequences of the peptides as well as the amino terminus to amplify a fragment from LTA cDNA, and utilizing the resultant probe to obtain full-length enzyme cDNAs from a lambda Zap Express LTA cDNA library. Human 3-OST cDNAs were isolated by searching the expressed sequence tag data bank with the mouse sequence, identifying a partial-length human cDNA and utilizing the clone as a probe to isolate a full-length enzyme cDNA from a lambda TriplEx human brain cDNA library. The expression of wild-type mouse 3-OST as well as protein A-tagged mouse enzyme by transient transfection of COS-7 cells and the expression of both wild-type mouse and human 3-OST by in vitro transcription/translation demonstrate that the two cDNAs directly encode both HSact conversion and 3-OST activities. The mouse 3-OST cDNAs exhibit three different size classes because of a 5'-untranslated region of variable length, which results from the insertion of 0-1629 base pairs (bp) between residues 216 and 217; however, all cDNAs contain the same open reading frame of 933 bp. The length of the 3'-untranslated region ranges from 301 to 430 bp. The nucleic acid sequence of mouse and human 3-OST cDNAs are approximately 85% similar, encoding novel 311- and 307-amino acid proteins of 35,876 and 35,750 daltons, respectively, that are 93% similar. The encoded enzymes are predicted to be intraluminal Golgi residents, presumably interacting via their C-terminal regions with an integral membrane protein. Both 3-OST species exhibit five potential N-glycosylation sites, which account for the apparent discrepancy between the molecular masses of the encoded enzyme (approximately 34 kDa) and the previously purified enzyme (approximately 46 kDa). The two 3-OST species also exhibit approximately 50% similarity with all previously identified forms of the heparan biosynthetic enzyme N-deacetylase/N-sulfotransferase, which suggests that heparan biosynthetic enzymes share a common sulfotransferase domain.

Purification of heparan sulfate D-glucosaminyl 3-O-sulfotransferase

The cellular generation of proteoglycans with anticoagulant heparan sulfate (HSPGact) is determined by microsomal "HSact conversion activity" that functions in concert with the sulfate donor 3'-phosphoadenosine 5'-phosphosulfate (PAPS) to convert nonanticoagulant heparan sulfate (HSinact) to anticoagulant heparan sulfate (HSact) (Shworak, N. W., Fritze, L. M. S., Liu, J., Butler, L. D., and Rosenberg, R. D. (1996) J. Biol. Chem. 271, 27063-27071). Suspension cultures of L-33(+) cells in serum-free medium produce HSPGact and secrete HSact conversion activity. The secreted protein exhibiting HSact conversion activity was isolated by subjecting large volumes of conditioned suspension culture medium to heparin-AF Toyopearl affinity chromatography, Mono Q-FPLC, TSK SW3000-HPLC, and 3',5'-ADP-agarose affinity chromatography. The final product was purified approximately 700,000-fold relative to cellular material with a 5% overall recovery of HSact conversion activity. The isolated protein migrated on SDS-polyacrylamide gel electrophoresis as a broad band of Mr = 46,000 and co-migrated on nondenaturing acidic pH gel electrophoresis with HSact conversion activity. The purified component was identified as heparan sulfate D-glucosaminyl 3-O-sulfotransferase because it transferred sulfate from [35S]PAPS to the 3-O-position of D-glucosamine and D-glucosamine 6-O-sulfate of HSact precursor and HSinact precursor to produce nearly equivalent amounts of labeled HSact and HSinact. The exhaustive modification of wild-type LTA cell [35S]HS with either microsomal HSact conversion activity or purified enzyme increased HSact content from 9 to approximately 36%, which indicates that microsomal HSact conversion activity predominantly reflects the level of a 3-O-sulfotransferase that converts HSact precursor into HSact. The kinetic parameters of purified 3-O-sulfotransferase were determined for modification of HSact precursor and HSinact precursor. The apparent KM* and Vmax* with respect to PAPS concentration for sulfation of HSact precursor and HSinact precursor were 2.4 microM and 23 fmol of sulfate/min/ng of enzyme and 2.1 microM and 38 fmol of sulfate/min/ng of enzyme, respectively. There was substrate inhibition of the sulfation reaction at elevated HS concentration. The apparent KM* and Vmax* with respect to GAG concentration for sulfation of HSact precursor and HSinact precursor were 16 nM and 120 fmol of sulfate/min/ng of enzyme and 17 nM and 240 fmol of sulfate/min/ng of enzyme, respectively. The observation that purified 3-O-sulfotransferase catalyzes sulfation of HSact precursor and HSinact precursor in conjunction with a documented discordant regulation of 3-O-sulfate content in HSinact and HSact suggests that two discrete forms of the enzyme may exist.