Iteron inhibition of plasmid RK2 replication in vitro: evidence for intermolecular coupling of replication origins as a mechanism for RK2 replication control

Iteron control of oriV function in IncP-1 plasmid RK2

Replication control of many plasmids is mediated by the balance between the positive and negative effects of Rep protein binding repeated sequences (iterons) associated with the replication origin, oriV. Negative control is thought to be mediated by dimeric Rep protein linking iterons in a process termed "handcuffing". The well-studied oriV region of RK2 contains 9 iterons arranged as a singleton (iteron 1), a group of 3 (iterons 2-4) and a group of 5 (iterons 5-9), but only iterons 5 to 9 are essential for replication. An additional iteron (iteron 10), oriented in the opposite direction, is also involved and reduces copy-number nearly two-fold. Since iterons 1 and 10 share an identical upstream hexamer (5' TTTCAT 3') it has been hypothesised that they form a TrfA-mediated loop facilitated by their inverted orientation. Here we report that contrary to the hypothesis, flipping one or other so they are in direct orientation results in marginally lower rather than higher copy-number. In addition, following mutagenesis of the hexamer upstream of iteron 10, we report that the Logo for the hexamer "upstream" of the regulatory iterons (1 to 4 and 10) differs from that of the essential iterons, suggesting functional differences in their interaction with TrfA.

Intracellular Competitions Reveal Determinants of Plasmid Evolutionary Success

Plasmids are autonomously replicating genetic elements that are ubiquitous in all taxa and habitats where they constitute an integral part of microbial genomes. The stable inheritance of plasmids depends on their segregation during cell division and their long-term persistence in a host population is thought to largely depend on their impact on the host fitness. Nonetheless, many plasmids found in nature are lacking a clear trait that is advantageous to their host; the determinants of plasmid evolutionary success in the absence of plasmid benefit to the host remain understudied. Here we show that stable plasmid inheritance is an important determinant of plasmid evolutionary success. Borrowing terminology from evolutionary biology of cellular living forms, we hypothesize that Darwinian fitness is key for the plasmid evolutionary success. Performing intracellular plasmid competitions between non-mobile plasmids enables us to compare the evolutionary success of plasmid genotypes within the host, i.e., the plasmid fitness. Intracellular head-to-head competitions between stable and unstable variants of the same model plasmid revealed that the stable plasmid variant has a higher fitness in comparison to the unstable plasmid. Preemptive plasmid competitions reveal that plasmid fitness may depend on the order of plasmid arrival in the host. Competitions between plasmids characterized by similar stability of inheritance reveal plasmid fitness differences depending on the plasmid-encoded trait. Our results further reveal that competing plasmids can be maintained in coexistence following plasmid fusions that maintain unstable plasmid variants over time. Plasmids are not only useful accessory genetic elements to their host but they are also evolving and replicating entities, similarly to cellular living forms. There is a clear link between plasmid genetics and plasmid evolutionary success – hence plasmids are evolving entities whose fitness is quantifiable.

Potentiation of curing by a broad-host-range self-transmissible vector for displacing resistance plasmids to tackle AMR

Plasmids are potent vehicles for spread of antibiotic resistance genes in bacterial populations and often persist in the absence of selection due to efficient maintenance mechanisms. We previously constructed non-conjugative high copy number plasmid vectors that efficiently displace stable plasmids from enteric bacteria in a laboratory context by blocking their replication and neutralising their addiction systems. Here we assess a low copy number broad-host-range self-transmissible IncP-1 plasmid as a vector for such curing cassettes to displace IncF and IncK plasmids. The wild type plasmid carrying the curing cassette displaces target plasmids poorly but derivatives with deletions near the IncP-1 replication origin that elevate copy number about two-fold are efficient. Verification of this in mini IncP-1 plasmids showed that elevated copy number was not sufficient and that the parB gene, korB, that is central to its partitioning and gene control system, also needs to be included. The resulting vector can displace target plasmids from a laboratory population without selection and demonstrated activity in a mouse model although spread is less efficient and requires additional selection pressure.

Genes within Genes in Bacterial Genomes

Genetic coding in bacteria largely operates via the "one gene-one protein" paradigm. However, the peculiarities of the mRNA structure, the versatility of the genetic code, and the dynamic nature of translation sometimes allow organisms to deviate from the standard rules of protein encoding. Bacteria can use several unorthodox modes of translation to express more than one protein from a single mRNA cistron. One such alternative path is the use of additional translation initiation sites within the gene. Proteins whose translation is initiated at different start sites within the same reading frame will differ in their N termini but will have identical C-terminal segments. On the other hand, alternative initiation of translation in a register different from the frame dictated by the primary start codon will yield a protein whose sequence is entirely different from the one encoded in the main frame. The use of internal mRNA codons as translation start sites is controlled by the nucleotide sequence and the mRNA folding. The proteins of the alternative proteome generated via the "genes-within-genes" strategy may carry important functions. In this review, we summarize the currently known examples of bacterial genes encoding more than one protein due to the utilization of additional translation start sites and discuss the known or proposed functions of the alternative polypeptides in relation to the main protein product of the gene. We also discuss recent proteome- and genome-wide approaches that will allow the discovery of novel translation initiation sites in a systematic fashion.

Handcuffing reversal is facilitated by proteases and replication initiator monomers

Specific nucleoprotein complexes are formed strictly to prevent over-initiation of DNA replication. An example of those is the so-called handcuff complex, in which two plasmid molecules are coupled together with plasmid-encoded replication initiation protein (Rep). In this work, we elucidate the mechanism of the handcuff complex disruption. In vitro tests, including dissociation progress analysis, demonstrate that the dimeric variants of plasmid RK2 replication initiation protein TrfA are involved in assembling the plasmid handcuff complex which, as we found, reveals high stability. Particular proteases, namely Lon and ClpAP, disrupt the handcuff by degrading TrfA, thus affecting plasmid stability. Moreover, our data demonstrate that TrfA monomers are able to dissociate handcuffed plasmid molecules. Those monomers displace TrfA molecules, which are involved in handcuff formation, and through interaction with the uncoupled plasmid replication origins they re-initiate DNA synthesis. We discuss the relevance of both Rep monomers and host proteases for plasmid maintenance under vegetative and stress conditions.

Plasmid replication initiator interactions with origin 13-mers and polymerase subunits contribute to strand-specific replisome assembly

Although the molecular basis for replisome activity has been extensively investigated, it is not clear what the exact mechanism for de novo assembly of the replication complex at the replication origin is, or how the directionality of replication is determined. Here, using the plasmid RK2 replicon, we analyze the protein interactions required for Escherichia coli polymerase III (Pol III) holoenzyme association at the replication origin. Our investigations revealed that in E. coli, replisome formation at the plasmid origin involves interactions of the RK2 plasmid replication initiation protein (TrfA) with both the polymerase β- and α-subunits. In the presence of other replication proteins, including DnaA, helicase, primase and the clamp loader, TrfA interaction with the β-clamp contributes to the formation of the β-clamp nucleoprotein complex on origin DNA. By reconstituting in vitro the replication reaction on ssDNA templates, we demonstrate that TrfA interaction with the β-clamp and sequence-specific TrfA interaction with one strand of the plasmid origin DNA unwinding element (DUE) contribute to strand-specific replisome assembly. Wild-type TrfA, but not the TrfA QLSLF mutant (which does not interact with the β-clamp), in the presence of primase, helicase, Pol III core, clamp loader, and β-clamp initiates DNA synthesis on ssDNA template containing 13-mers of the bottom strand, but not the top strand, of DUE. Results presented in this work uncovered requirements for anchoring polymerase at the plasmid replication origin and bring insights of how the directionality of DNA replication is determined.

Sequence-specific interactions of Rep proteins with ssDNA in the AT-rich region of the plasmid replication origin

The DNA unwinding element (DUE) is a sequence rich in adenine and thymine residues present within the origin region of both prokaryotic and eukaryotic replicons. Recently, it has been shown that this is the site where bacterial DnaA proteins, the chromosomal replication initiators, form a specific nucleoprotein filament. DnaA proteins contain a DNA binding domain (DBD) and belong to the family of origin binding proteins (OBPs). To date there has been no data on whether OBPs structurally different from DnaA can form nucleoprotein complexes within the DUE. In this work we demonstrate that plasmid Rep proteins, composed of two Winged Helix domains, distinct from the DBD, specifically bind to one of the strands of ssDNA within the DUE. We observed nucleoprotein complexes formed by these Rep proteins, involving both dsDNA containing the Rep-binding sites (iterons) and the strand-specific ssDNA of the DUE. Formation of these complexes required the presence of all repeated sequence elements located within the DUE. Any changes in these repeated sequences resulted in the disturbance in Rep-ssDNA DUE complex formation and the lack of origin replication activity in vivo or in vitro.

A personal reflection on the replicon theory: from R1 plasmid to replication timing regulation in human cells

Fifty years after the Replicon Theory was originally presented, detailed mechanistic insight into prokaryotic replicons has been obtained and rapid progress is being made to elucidate the more complex regulatory mechanisms of replicon regulation in eukaryotic cells. Here, I present my personal perspectives on how studies of model replicons have contributed to our understanding of the basic mechanisms of DNA replication as well as the evolution of replication regulation in human cells. I will also discuss how replication regulation contributes to the stable maintenance of the genome and how disruption of replication regulation leads to human diseases.

Roles of long and short replication initiation proteins in the fate of IncP-1 plasmids

Broad-host-range IncP-1 plasmids generally encode two replication initiation proteins, TrfA1 and TrfA2. TrfA2 is produced from an internal translational start site within trfA1. While TrfA1 was previously shown to be essential for replication in Pseudomonas aeruginosa, its role in other bacteria within its broad host range has not been established. To address the role of TrfA1 and TrfA2 in other hosts, efficiency of transformation, plasmid copy number (PCN), and plasmid stability were first compared between a mini-IncP-1β plasmid and its trfA1 frameshift variant in four phylogenetically distant hosts: Escherichia coli, Pseudomonas putida, Sphingobium japonicum, and Cupriavidus necator. TrfA2 was sufficient for replication in these hosts, but the presence of TrfA1 enhanced transformation efficiency and PCN. However, TrfA1 did not contribute to, and even negatively affected, long-term plasmid persistence. When trfA genes were cloned under a constitutive promoter in the chromosomes of the four hosts, strains expressing either both TrfA1 and TrfA2 or TrfA1 alone, again, generally elicited a higher PCN of an IncP1-β replicon than strains expressing TrfA2 alone. When a single species of TrfA was produced at different concentrations in E. coli cells, TrfA1 maintained a 3- to 4-fold higher PCN than TrfA2 at the same TrfA concentrations, indicating that replication mediated by TrfA1 is more efficient than that by TrfA2. These results suggest that the broad-host-range properties of IncP-1 plasmids are essentially conferred by TrfA2 and the intact replication origin alone but that TrfA1 is nonetheless important to efficiently establish plasmid replication upon transfer into a broad range of hosts.

Opposing effects of DNA on proteolysis of a replication initiator

DNA replication initiation proteins (Reps) are subjected to degradation by cellular proteases. We investigated how the formation of nucleoprotein complex, involving Rep and a protease, affects Rep degradation. All known Escherichia coli AAA+ cytosolic proteases and the replication initiation protein TrfA of the broad-host-range plasmid RK2 were used. Our results revealed that DNA influences the degradation process and that the observed effects are opposite and protease specific. In the case of ClpXP and ClpYQ proteases, DNA abolishes proteolysis, while in the case of ClpAP and Lon proteases it stimulates the process. ClpX and ClpY cannot interact with DNA-bound TrfA, while the ClpAP and Lon activities are enhanced by the formation of nucleoprotein complexes involving both the protease and TrfA. Lon has to interact with TrfA before contacting DNA, or this interaction can occur with TrfA already bound to DNA. The TrfA degradation by Lon can be carried out only on DNA. The absence of Lon results with higher stability of TrfA in the cell.

Characterization of a large, stable, high-copy-number Streptomyces plasmid that requires stability and transfer functions for heterologous polyketide overproduction

A major limitation to improving small-molecule pharmaceutical production in streptomycetes is the inability of high-copy-number plasmids to tolerate large biosynthetic gene cluster inserts. A recent finding has overcome this barrier. In 2003, Hu et al. discovered a stable, high-copy-number, 81-kb plasmid that significantly elevated production of the polyketide precursor to the antibiotic erythromycin in a heterologous Streptomyces host (J. Ind. Microbiol. Biotechnol. 30:516-522, 2003). Here, we have identified mechanisms by which this SCP2*-derived plasmid achieves increased levels of metabolite production and examined how the 45-bp deletion mutation in the plasmid replication origin increased plasmid copy number. A plasmid intramycelial transfer gene, spd, and a partition gene, parAB, enhance metabolite production by increasing the stable inheritance of large plasmids containing biosynthetic genes. Additionally, high product titers required both activator (actII-ORF4) and biosynthetic genes (eryA) at high copy numbers. DNA gel shift experiments revealed that the 45-bp deletion abolished replication protein (RepI) binding to a plasmid site which, in part, supports an iteron model for plasmid replication and copy number control. Using the new information, we constructed a large high-copy-number plasmid capable of overproducing the polyketide 6-deoxyerythronolide B. However, this plasmid was unstable over multiple culture generations, suggesting that other SCP2* genes may be required for long-term, stable plasmid inheritance.

The plasmid RK2 replication initiator protein (TrfA) binds to the sliding clamp beta subunit of DNA polymerase III: implication for the toxicity of a peptide derived from the amino-terminal portion of 33-kilodalton TrfA

The broad-host-range plasmid RK2 is capable of replication and stable maintenance within a wide range of gram-negative bacterial hosts. It encodes the essential replication initiation protein TrfA, which binds to the host initiation protein, DnaA, at the plasmid origin of replication (oriV). There are two versions of the TrfA protein, 44 and 33 kDa, resulting from alternate in-frame translational starts. We have shown that the smaller protein, TrfA-33, and its 64-residue amino-terminal peptide (designated T1) physically interact with the Escherichia coli beta sliding clamp (beta(2)). This interaction appears to be mediated through a QLSLF peptide motif located near the amino-terminal end of TrfA-33 and T1, which is identical to the previously described eubacterial clamp-binding consensus motif. T1 forms a stable complex with beta(2) and was found to inhibit plasmid RK2 replication in vitro. This specific interaction between T1 and beta(2) and the ability of T1 to block DNA replication have implications for the previously reported cell lethality caused by overproduction of T1. The toxicity of T1 was suppressed when wild-type T1 was replaced with mutant T1, carrying an LF deletion in the beta-binding motif. Previously, T1 toxicity has been shown to be suppressed by Hda, an intermediate regulatory protein which helps prevent over-initiation in E. coli through its interaction with the initiator protein, DnaA, and beta(2). Our results support a model in which T1 toxicity is caused by T1 binding to beta(2), especially when T1 is overexpressed, preventing beta(2) from interacting with host replication proteins such as Hda during the early events of chromosome replication.

IncP-9 replication initiator protein binds to multiple DNA sequences in oriV and recruits host DnaA protein

The minimal replicon from IncP-9 plasmid pM3, consisting of oriV and rep, is able to replicate in Pseudomonas putida but not in Escherichia coli, unless production of Rep protein is increased. The Rep protein, at 20kDa, is the smallest replication protein so far identified for a theta replicating plasmid. Rep was purified and shown to bind in three blocks across the oriV region that do not correlate with a single unique binding sequence. The block closest to rep is not necessary for oriV function. Rep forms at least two types of complex--one rendering the DNA entirely resistant to cleavage, the other occupying one side of the helix. No short segment of oriV showed the same affinity for Rep as the whole of oriV. The oriV region did not bind purified DnaA from E. coli, P. putida or P. aeruginosa but when Rep was present also, super-shifts were found with DnaA in a sequence-specific manner. Scrambling of the primary candidate DnaA box did not inactivate oriV but did increase the level of Rep required to activate oriV. The general pattern of Rep-DNA recognition sequences in oriV indicates that the IncP-9 system falls outside of the paradigms of model plasmids that have been well-studied to date.

Inhibition of protein and RNA synthesis in Escherichia coli results in declustering of plasmid RK2

Multi-copy plasmids in Escherichia coli are not randomly distributed throughout the cell but are present as clusters of plasmid molecules that are localized at preferred cellular locations. A plasmid RK2 derivative (pZZ15) that can be tagged with a green fluorescent protein-LacI fusion protein normally exists as clusters that are localized at the mid- and quarter-cell positions. In this study the effect of the protein synthesis inhibitor, chloramphenicol, and the RNA synthesis inhibitor, rifampicin, on RK2 clustering and localization was examined. The addition of either inhibitor to exponentially growing E. coli cells carrying pZZ15 results in a displacement of the position and a declustering of this multi-copy plasmid indicating that continued protein synthesis and RNA synthesis are required for clustering and localization of this plasmid. It is likely that it is not just the process of transcription or translation that is important for clustering but rather some host or plasmid encoded factor(s) that is required.

Positioning and the specific sequence of each 13-mer motif are critical for activity of the plasmid RK2 replication origin

The minimal replication origin of the broad-host-range plasmid RK2, oriV, contains five iterons which are binding sites for the plasmid-encoded replication initiation protein TrfA, four DnaA boxes, which bind the host DnaA protein, and an AT-rich region containing four 13-mer sequences. In this study, 26 mutants with altered sequence and/or spacing of 13-mer motifs have been constructed and analysed for replication activity in vivo and in vitro. The data show that the replacement of oriV 13-mers by similar but not identical 13-mer sequences from Escherichia coli oriC inactivates the origin. In addition, interchanging the positions of the oriV 13-mers results in greatly reduced activity. Mutants with T/A substitutions are also inactive. Furthermore, introduction of single-nucleotide substitutions demonstrates very restricted sequence requirements depending on the 13-mer position. Only two of the mutants are host specific, functional in Pseudomonas aeruginosa but not in E. coli. Our experiments demonstrate considerable complexity in the plasmid AT-rich region architecture required for functionality. It is evident that low internal stability of this region is not the only feature contributing to origin activity. Our studies suggest a requirement for sequence-specific protein interactions within the 13-mers during assembly of replication complexes at the plasmid origin.

Identification and characterization of a novel allele of Escherichia coli dnaB helicase that compromises the stability of plasmid P1

Bacteriophage P1 lysogenizes Escherichia coli cells as a plasmid with approximately the same copy number as the copy number of the host chromosome. Faithful inheritance of the plasmids relies upon proper DNA replication, as well as a partition system that actively segregates plasmids to new daughter cells. We genetically screened for E. coli chromosomal mutations that influenced P1 stability and identified a novel temperature-sensitive allele of the dnaB helicase gene (dnaB277) that replaces serine 277 with a leucine residue (DnaB S277L). This allele conferred a severe temperature-sensitive phenotype to the host; dnaB277 cells were not viable at temperatures above 34 degrees C. Shifting dnaB277 cells to 42 degrees C resulted in an immediate reduction in the rate of DNA synthesis and extensive cell filamentation. The dnaB277 allele destabilized P1 plasmids but had no significant influence on the stability of the F low-copy-number plasmid. This observation suggests that there is a specific requirement for DnaB in P1 plasmid maintenance in addition to the general requirement for DnaB as the replicative helicase during elongation.

Replication of a unit-copy plasmid F in the bacterial cell cycle: a replication rate function analysis

For stability, the replication of unit-copy plasmids ought to occur by a highly controlled process. We have characterized the replication dynamics of a unit-copy plasmid F by a replication rate function defined as the probability per unit age interval of the cell cycle that a plasmid will initiate replication. Analysis of baby-machine data [J. Bacteriol. 170 (1988) 1380; J. Bacteriol. 179 (1997) 1393] by stochastics that make no detailed reference to underlying mechanism revealed that this rate function increased monotonically over the cell cycle with rapid increase near cell division. This feature is highly suggestive of a replication control mechanism that is designed to force most plasmids to replicate before cells undergo division. The replication rate function is developed anew from a mechanistic model incorporating the hypotheses that initiators are limiting and that steric hindrance of origins by handcuffing control initiation of replication. The model is based on correctly folded initiator protein monomers arising from an inactive dimer pool via chaperones in limiting amounts, their random distribution to high affinity sites (iterons) at the origin (ori) and an outside locus (incC), the statistical mechanics of bound monomer participation in pairing the two loci (cis-handcuffing), and initiation probability as proportional to the number of non-handcuffed ori-saturated plasmids. Provided cis-handcuffing is present, this model closely accounts for the shape of the replication rate function derived from experiment, and reproduces the observation that replication occurs throughout the cell cycle. Present concepts of iteron-based molecular mechanisms thus appear capable of yielding a quantitative description of unit-copy-number plasmid replication dynamics.

Biochemical investigations of control of replication initiation of plasmid R6K

The mechanistic basis of control of replication initiation of plasmid R6K was investigated by addressing the following questions. What are the biochemical attributes of mutations in the pi initiator protein that caused loss of negative control of initiation? Did the primary control involve only initiator protein-ori DNA interaction or did it also involve protein-protein interactions between pi and several host-encoded proteins? Mutations at two different regions of the pi-encoding sequence individually caused some loss of negative control as indicated by a relatively modest increase in copy number. However, combinations of the mutation P42L, which caused loss of DNA looping, with those located in the region between the residues 106 and 113 induced a robust enhancement of copy number. These mutant forms promoted higher levels of replication in vitro in a reconstituted system consisting of 22 purified proteins. The mutant forms of pi were susceptible to pronounced iteron-induced monomerization in comparison with the WT protein. As contrasted with the changes in DNA-protein interaction, we found no detectable differences in protein-protein interaction between wild type pi with DnaA, DnaB helicase, and DnaG primase on one hand and between the high copy mutant forms and the same host proteins on the other. The DnaG-pi interaction reported here is novel. Taken together, the results suggest that both loss of negative control due to iteron-induced monomerization of the initiator and enhanced iteron-initiator interaction appear to be the principal causes of enhanced copy number.

Reconstitution of R6K DNA replication in vitro using 22 purified proteins

We have reconstituted a multiprotein system consisting of 22 purified proteins that catalyzed the initiation of replication specifically at ori gamma of R6K, elongation of the forks, and their termination at specific replication terminators. The initiation was strictly dependent on the plasmid-encoded initiator protein pi and on the host-encoded initiator DnaA. The wild type pi was almost inert, whereas a mutant form containing 3 amino acid substitutions that tended to monomerize the protein was effective in initiating replication. The replication in vitro was primed by DnaG primase, whereas in a crude extract system that had not been fractionated, it was dependent on RNA polymerase. The DNA-bending protein IHF was needed for optimal replication and its substitution by HU, unlike in the oriC system, was less effective in promoting optimal replication. In contrast, wild type pi-mediated replication in vivo requires IHF. Using a template that contained ori gamma flanked by two asymmetrically placed Ter sites in the blocking orientation, replication proceeded in the Cairns type mode and generated the expected types of termination products. A majority of the molecules progressed counterclockwise from the ori, in the same direction that has been observed in vivo. Many features of replication in the reconstituted system appeared to mimic those of in vivo replication. The system developed here is an important milestone in continuing biochemical analysis of this interesting replicon.

Molecular handcuffing of the relaxosome at the origin of conjugative transfer of the plasmid R1162

The assembly of plasmid-encoded proteins at a unique site (oriT) on the plasmid R1162, to form a complex called the relaxosome, is required for conjugative transfer of the plasmid and for negative regulation of neighboring promoters. Two-dimensional chloroquine gel electrophoresis was used to show that oriTs are physically coupled at the relaxosome. This interaction requires all the relaxosome proteins, which are assembled into a structure resulting in a decrease in the average linking number of the plasmid DNA in the cell. Molecules with higher superhelical densities are preferentially selected for assembly of the relaxosome. Genetic data obtained earlier indicate that the molecular coupling reported here is a 'handcuffing' reaction that contributes to the regulation of adjacent plasmid promoters. However, although these promoters affect the expression of the genes for replication, plasmid copy-control is regulated independently. This is the first time 'handcuffing' has been observed at an oriT, and its possible significance for transfer is discussed.

Role of the cgtA gene function in DNA replication of extrachromosomal elements in Escherichia coli

The cgtA gene codes for a common GTP-binding protein whose homologues were found in all prokaryotic and eukaryotic organisms investigated so far. Although cgtA is an essential gene in most bacterial species, its precise functions in the regulation of cellular processes are largely unknown. In Escherichia coli, dysfunction or overexpression of the cgtA gene causes problems in various chromosomal functions, like synchronization of DNA replication initiation and partitioning of daughter chromosomes after a replication round. It is not know how the cgtA gene product regulates these processes. Here we investigated effects of cgtA dysfunction on replication of plasmid and phage replicons. We found that replication of some plasmids (e.g., ColE1-like) is not affected in the cgtA mutant. On the other hand, dysfunction of the cgtA gene caused a strong inhibition of lambda plasmid DNA replication. Bacteriophage lambda development was severely impaired in the cgtA mutant. Replication of other plasmid replicons (derivatives of F, R1, R6K, and RK2) was influenced by the cgtA mutation moderately. It seems that DNA synthesis per se is not affected by CgtA, and that this protein might control replication initiation indirectly, by regulation of function(s) or production of one or more replication factors. In fact, we found that level of the host-encoded replication protein DnaA is significantly decreased in the cgtA mutant. This indicates that CgtA is involved in the regulation of dnaA gene expression.

Cooperative action of Escherichia coli ClpB protein and DnaK chaperone in the activation of a replication initiation protein

The Escherichia coli molecular chaperone protein ClpB is a member of the highly conserved Hsp100/Clp protein family. Previous studies have shown that the ClpB protein is needed for bacterial thermotolerance. Purified ClpB protein has been shown to reactivate chemically and heat-denatured proteins. In this work we demonstrate that the combined action of ClpB and the DnaK, DnaJ, and GrpE chaperones leads to the activation of DNA replication of the broad-host-range plasmid RK2. In contrast, ClpB is not needed for the activation of the oriC-dependent replication of E. coli. Using purified protein components we show that the ClpB/DnaK/DnaJ/GrpE synergistic action activates the plasmid RK2 replication initiation protein TrfA by converting inactive dimers to an active monomer form. In contrast, Hsp78/Ssc1/Mdj1/Mge1, the corresponding protein system from yeast mitochondria, cannot activate the TrfA replication protein. Our results demonstrate for the first time that the ClpB/DnaK/DnaJ/GrpE system is involved in protein monomerization and in the activation of a DNA replication factor.

ParE toxin encoded by the broad-host-range plasmid RK2 is an inhibitor of Escherichia coli gyrase

Broad-host-range plasmid RK2 encodes a post-segregational killing system, parDE, which contributes to the stable maintenance of this plasmid in Escherichia coli and many distantly related bacteria. The ParE protein is a toxin that inhibits cell growth, causes cell filamentation and eventually cell death. The ParD protein is a specific ParE antitoxin. In this work, the in vitro activities of these two proteins were examined. The ParE protein was found to inhibit DNA synthesis using an E. coli oriC supercoiled template and a replication-proficient E. coli extract. Moreover, ParE inhibited the early stages of both chromosomal and plasmid DNA replication, as measured by the DnaB helicase- and gyrase-dependent formation of FI*, a highly unwound form of supercoiled DNA. The presence of ParD prevented these inhibitory activities of ParE. We also observed that the addition of ParE to supercoiled DNA plus gyrase alone resulted in the formation of a cleavable gyrase-DNA complex that was converted to a linear DNA form upon addition of sodium dodecyl sulphate (SDS). Adding ParD before or after the addition of ParE prevented the formation of this cleavable complex. These results demonstrate that the target of ParE toxin activity in vitro is E. coli gyrase.

DnaA boxes in the P1 plasmid origin: the effect of their position on the directionality of replication and plasmid copy number

The DnaA protein is essential for initiation of DNA replication in a wide variety of bacterial and plasmid replicons. The replication origin in these replicons invariably contains specific binding sites for the protein, called DnaA boxes. Plasmid P1 contains a set of DnaA boxes at each end of its origin but can function with either one of the sets. Here we report that the location of origin-opening, initiation site of replication forks and directionality of replication do not change whether the boxes are present at both or at one of the ends of the origin. Replication was bidirectional in all cases. These results imply that DnaA functions similarly from the two ends of the origin. However, origins with DnaA boxes proximal to the origin-opening location opened more efficiently and maintained plasmids at higher copy numbers. Origins with the distal set were inactive unless the adjacent P1 DNA sequences beyond the boxes were included. At either end, phasing of the boxes with respect to the remainder of the origin influenced the copy number. Thus, although the boxes can be at either end, their precise context is critical for efficient origin function.

Incompatibility protein IncC and global regulator KorB interact in active partition of promiscuous plasmid RK2

Replication of the broad-host-range, IncPalpha plasmid RK2 requires two plasmid loci: trfA, the replication initiator gene, and oriV, the origin of replication. While these determinants are sufficient for replication in a wide variety of bacteria, they do not confer the stable maintenance of parental RK2 observed in its hosts. The product of the incC gene has been proposed to function in the stable maintenance of RK2 because of its relatedness to the ParA family of ATPases, some of which are known to be involved in the active partition of plasmid and chromosomal DNA. Here we show that IncC has the properties expected of a component of an active partition system. The smaller polypeptide product of incC (IncC2) exhibits a strong, replicon-independent incompatibility phenotype with RK2. This incompatibility phenotype requires the global transcriptional repressor, KorB, and the target for incC-mediated incompatibility is a KorB-binding site (O(B)). We found that KorB and IncC interact in vivo by using the yeast two-hybrid system and in vitro by using partially purified proteins. Elevated expression of the incC and korB genes individually has no obvious effect on Escherichia coli cell growth, but their simultaneous overexpression is toxic, indicating a possible interaction of IncC-KorB complexes with a vital host target. A region of RK2 bearing incC, korB, and multiple KorB-binding sites is able to stabilize an unstable, heterologous plasmid in an incC-dependent manner. Finally, elevated levels of IncC2 cause RK2 to aggregate, indicating a possible role for IncC in plasmid pairing. These findings demonstrate that IncC, KorB, and at least one KorB-binding site are components of an active partition system for the promiscuous plasmid RK2.

A pot-pourri of plasmid paradoxes: effects of a second copy

Bacterial plasmids are exemplary subjects for study, being conveniently isolated, dissected, reassembled, and introduced into various hosts. Their versatility and power make them eminently worthy of our attention. In what follows I consider some consequences of simply doubling the dosage of particular plasmid genes or of forming a plasmid dimer. These consequences can be perverse, paradoxical, or informative. They bear on questions of cell viability, copy number limitation, clonal homogeneity, check-point control, and the recovery of mutants. They have relevance to biotechnology, evolution and medicine. In reviewing these effects, my motivation is largely to share my enthusiasm for certain kinds of biological narratives, the nature of which is best left for the reader to discern.

Control of plasmid DNA replication by iterons: no longer paradoxical

Replication origins of a family of bacterial plasmids have multiple sites, called iterons, for binding a plasmid-specific replication initiator protein. The iteron-initiator interactions are essential for plasmid replication as well as for inhibition of plasmid over-replication. The inhibition increases with plasmid copy number and eventually shuts plasmid replication off completely. The mechanism of inhibition appears to be handcuffing, the coupling of origins via iteron-bound initiators that block origin function. The probability of a trans-reaction such as handcuffing is expected to increase with plasmid copy number and diminish with increases in cell volume, explaining how the copy number can be maintained in a growing cell. Control is also exerted at the level of initiator synthesis and activation by chaperones. We propose that increases in active initiators promote initiation by overcoming handcuffing, but handcuffing dominates when the copy number reaches a threshold. Handcuffing should be ultrasensitive to copy number, as the negative control by iterons can be stringent (switch-like).

Characterization of the oriI and oriII origins of replication in phage-plasmid P4

In the Escherichia coli phage-plasmid P4, two partially overlapping replicons with bipartite ori sites coexist. The essential components of the oriI replicon are the alpha and cnr genes and the ori1 and crr sites; the oriII replicon is composed of the alpha gene, with the internal ori2 site, and the crr region. The P4 alpha protein has primase and helicase activities and specifically binds type I iterons, present in ori1 and crr. Using a complementation test for plasmid replication, we demonstrated that the two replicons depend on both the primase and helicase activities of the alpha protein. Moreover, neither replicon requires the host DnaA, DnaG, and Rep functions. The bipartite origins of the two replicons share the crr site and differ for ori1 and ori2, respectively. By deletion mapping, we defined the minimal ori1 and ori2 regions sufficient for replication. The ori1 site was limited to a 123-bp region, which contains six type I iterons spaced regularly close to the helical periodicity, and a 35-bp AT-rich region. Deletion of one or more type I iterons inactivated oriI. Moreover, insertion of 6 or 10 bp within the ori1 region also abolished replication ability, suggesting that the relative arrangement of the iterons is relevant. The ori2 site was limited to a 36-bp P4 region that does not contain type I iterons. In vitro, the alpha protein did not bind ori2. Thus, the alpha protein appears to act differently at the two origins of replication.

Host-dependent requirement for specific DnaA boxes for plasmid RK2 replication

The replication origin of the broad-host-range plasmid RK2, oriV, contains four DnaA boxes, which bind the DnaA protein isolated from Escherichia coli. Using a transformation assay, mutational analysis of these boxes showed a differential requirement for replication in different Gram-negative bacteria. DnaA boxes 3 and 4 were required in E. coli and Pseudomonas putidabut not as strictly in Azotobacter vinelandii and not at all in P. aeruginosa. In vitro replication results using an extract prepared from E. coli demonstrated that the activity of origin derivatives containing mutations in boxes 3 or 4 or a deletion of all four DnaA boxes could be restored by the addition of increasing amounts of purified DnaA protein. High levels of DnaA protein in the presence of the TrfA protein also resulted in the stimulation of open complex formation and DnaB helicase loading on oriV, even in the absence of the four DnaA boxes. These observations at least raise the possibility that an alternative mechanism of initiation of oriV is being used in the absence of the four DnaA boxes and that this mechanism may be similar to that used in P. aeruginosa, which does not require these four DnaA boxes for replication.

A critical DnaA box directs the cooperative binding of the Escherichia coli DnaA protein to the plasmid RK2 replication origin

The requirement of DnaA protein binding for plasmid RK2 replication initiation the Escherichia coli was investigated by constructing mutations in the plasmid replication origin that scrambled or deleted each of the four upstream DnaA boxes. Altered origins were analyzed for replication activity in vivo and in vitro and for binding to the E. coli DnaA protein using a gel mobility shift assay and DNase I footprinting. Most strikingly, a mutation in one of the boxes, box 4, abolished replication activity and eliminated stable DnaA protein binding to all four boxes. Unlike DnaA binding to the E. coli origin, oriC, DnaA binding to two of the boxes (boxes 4 and 3) in the RK2 origin, oriV, is cooperative with box 4 acting as the "organizer" for the formation of the DnaA-oriV nucleoprotein complex. Interestingly, the inversion of box 4 also abolished replication activity, but did not result in a loss of binding to the other boxes. However, DnaA binding to this mutant origin was no longer cooperative. These results demonstrate that the sequence, position, and orientation of box 4 are crucial for cooperative DnaA binding and the formation of a nucleoprotein structure that is functional for the initiation of replication.

Replication of R6K gamma origin in vitro: discrete start sites for DNA synthesis dependent on pi and its copy-up variants

The regulation of the plasmid R6K gamma origin (gamma ori) is accomplished through the ability of the pi protein to act as an initiator and inhibitor of replication. Hyperactive variants of this protein, called copy-up pi, allow four to tenfold increases of gamma ori plasmid DNA in vivo. The higher activity of copy-up pi variants could be explained by an increase in the initiator function, a decrease in the inhibitor activity, or a derepression of a more efficient mechanism of replication that can be used by wt pi (pi35. 0) only under certain conditions. We have compared the replication activities of wt pi35.0 and copy-up pi mutants in vitro, and analyzed the replication products. It is shown that copy-up variants are several-fold more active than wt pi35.0 in replication. This appears to be due to enhanced specific replication activity of copy-up mutants rather than elevated fractions of protein proficient in DNA binding. Furthermore, biochemical complementation revealed that pi200 (copy-up) is dominant over wt pi35.0. The elevated activity of copy-up pi is not caused by an increased rate of replisome assembly as inferred from in vitro replication assays in which the lag periods observed were similar to that of wt pi35.0. Moreover, only one round of semiconservative, unidirectional replication occurred in all the samples analyzed indicating that copy-up pi proteins do not initiate multiple rounds of DNA synthesis. Rather, a larger fraction of DNA template replicates in the presence of copy-up pi as determined by electron microscopy. Two clusters of discrete DNA synthesis start sites are mapped by primer extension near the stability (stb) locus of the gamma ori. We show that the start sites are the same in the presence of wt pi35.0 or copy-up proteins. This comparative analysis suggests that wt pi35.0 and copy-up variants utilize fundamentally similar mechanism(s) of replication priming.

Mechanistic studies of initiator-initiator interaction and replication initiation

Unlike the chromosome of Escherichia coli that needs only one replication initiator protein (origin recognition protein) called DnaA, many plasmid replicons require dual initiators: host-encoded DnaA and a plasmid-encoded origin recognition protein, which is believed to be the major determinant of replication control. Hitherto, the relative mechanistic roles of dual initiators in DNA replication were unclear. Here, we present the first evidence that DnaA communicates with the plasmid-encoded pi initiator of R6K and contacts the latter at a specific N-terminal region. Without this specific contact, productive unwinding of plasmid ori gamma and replication is abrogated. The results also show that DnaA performs different roles in host and plasmid replication as revealed by the finding that the ATP-activated form of DnaA, while indispensable for oriC replication, was not required for R6K replication. We have analyzed the accessory role of the DNA bending protein, integration host factor (IHF), in promoting initiator-origin interaction and have found that IHF significantly enhances the binding of DnaA to its cognate site. Collectively, the results further advance our understanding of replication initiation.

Copy number control of IncIalpha plasmid ColIb-P9 by competition between pseudoknot formation and antisense RNA binding at a specific RNA site

Replication of a low-copy-number IncIalpha plasmid ColIb-P9 depends on expression of the repZ gene encoding the replication initiator protein. repZ expression is negatively controlled by the small antisense Inc RNA, and requires formation of a pseudoknot in the RepZ mRNA consisting of stem-loop I, the Inc RNA target, and a downstream sequence complementary to the loop I. The loop I sequence comprises 5'-rUUGGCG-3', conserved in many prokaryotic antisense systems, and was proposed to be the important site of copy number control. Here we show that the level of repZ expression is rate-limiting for replication and thus copy number, by comparing the levels of repZ expression and copy number from different mutant ColIb-P9 derivatives defective in Inc RNA and pseudoknot formation. Kinetic analyses using in vitro transcribed RNAs indicate that Inc RNA binding and the pseudoknot formation are competitive at the level of initial base paring to loop I. This initial interaction is stimulated by the presence of the loop U residue in the 5'-rUUGGCG-3' motif. These results indicate that the competition between the two RNA-RNA interactions at the specific site is a novel regulatory mechanism for establishing the constant level of repZ expression and thus copy number.

Replication origin of the broad host range plasmid RK2. Positioning of various motifs is critical for initiation of replication

The 393-base pair minimal origin, oriV, of plasmid RK2 contains three iterated motifs essential for initiation of replication: consensus sequences for binding the bacterial DnaA protein, DnaA boxes, which have recently been shown to bind the DnaA protein; 17-base pair direct repeats, iterons, which bind the plasmid encoded replication protein, TrfA; and A + T-rich repeated sequences, 13-mers, which serve as the initial site of helix destabilization. To investigate how the organization of the RK2 origin contributes to the mechanism of replication initiation, mutations were introduced into the minimal origin which altered the sequence and/or spacing of each particular region relative to the rest of the origin. These altered origins were analyzed for replication activity in vivo and in vitro, for localized strand opening and for DnaB helicase mediated unwinding. Mutations in the region between the iterons and the 13-mers which altered the helical phase or the intrinsic DNA curvature prevented strand opening of the origin and consequently abolished replication activity. Insertions of more or less than one helical turn between the DnaA boxes and the iterons also inactivated the replication origin. In these mutants, however, strand opening appeared normal but the levels of DnaB helicase activity were substantially reduced. These results demonstrate that correct helical phasing and intrinsic DNA curvature are critical for the formation of an open complex and that the DnaA boxes must be on the correct side of the helix to load DnaB helicase.

Replication of plasmids derived from P1, F, R1, R6K and RK2 replicons in amino acid-starved Escherichia coli stringent and relaxed strains

Replication of mini-plasmids derived from bacteriophage P1 and naturally existing plasmids F, R1, R6K and RK2 in otherwise isogenic relA+ and relA- Escherichia coli strains during amino acid starvation and limitation was investigated. Since it was previously demonstrated that inhibition of DNA synthesis or amplification of plasmid DNA may depend on the nature of deprived amino acid, we starved bacteria for five different amino acids. We found differential replication of all these plasmids but RK2 (which did not replicate at all in amino acid-starved bacteria) during the stringent and relaxed response. While in almost all cases plasmid DNA replication was inhibited during the stringent response irrespective of the nature of deprived amino acid, wild-type or copy-up mini-P1, mini-F and mini-R1 plasmids replicated in relA- bacteria depending on the kind of starvation. R6K-derived plasmids harbouring ori beta and gamma (but not those containing ori alpha, beta and gamma or only ori gamma) were able to replicate in relA- bacteria starved for all tested amino acids. Possible explanations for the mechanisms of regulation of replication of plasmids derived from P1, F, R1, R6K and RK2 during amino acid starvation are discussed. Our results also indicate that, like in the case of some other replicons, appropriate amino acid starvation or limitation may be used as a method for efficient amplification of plasmids derived from P1, F, R1 and R6K.

Helicase delivery and activation by DnaA and TrfA proteins during the initiation of replication of the broad host range plasmid RK2

Specific binding of the plasmid-encoded protein, TrfA, and the Escherichia coli DnaA protein to the origin region (oriV) is required for the initiation of replication of the broad host range plasmid RK2. It has been shown that the DnaA protein which binds to DnaA boxes upstream of the TrfA-binding sites (iterons) cannot by itself form an open complex, but it enhances the formation of the open complex by TrfA (Konieczny, I., Doran, K. S., Helinski, D. R., Blasina, A. (1997) J. Biol. Chem. 272, 20173). In this study an in vitro replication system is reconstituted from purified TrfA protein and E. coli proteins. With this system, a specific interaction between the DnaA and DnaB proteins is required for delivery of the helicase to the RK2 origin region. Although the DnaA protein directs the DnaB-DnaC complex to the plasmid replication origin, it cannot by itself activate the helicase. Both DnaA and TrfA proteins are required for DnaB-induced template unwinding. We propose that specific changes in the nucleoprotein structure mediated by TrfA result in a repositioning of the DnaB helicase within the open origin region and an activation of the DnaB protein for template unwinding.

The replication initiation protein of the broad-host-range plasmid RK2 is activated by the ClpX chaperone

Initiation and control of replication of the broad-host-range plasmid RK2 requires two plasmid-encoded elements, the replication origin (oriV) and the initiation protein TrfA. Purified TrfA is largely in the form of a dimer; however, only the monomeric form of the protein can bind specifically to the direct repeats (iterons) at the RK2 origin. The largely dimeric form of wild-type TrfA is inactive in the initiation of replication of RK2 in an in vitro replication system reconstituted from purified components. However, preincubation of the TrfA protein with the ClpX molecular chaperone isolated from Escherichia coli activates the initiator protein for replication in the purified system. We further observed that ClpX, in an ATP-dependent reaction, greatly increases the proportion of TrfA monomers and, therefore, the ability of this protein to bind to iterons localized within RK2 origin. Finally, a copy-up mutant of the TrfA protein which is largely in the monomer form is active in the reconstituted in vitro replication system, and its activity is not affected by ClpX.

Role of TrfA and DnaA proteins in origin opening during initiation of DNA replication of the broad host range plasmid RK2

The Escherichia coli protein DnaA and the plasmid RK2-encoded TrfA protein are required for initiation of replication of the broad host range plasmid RK2. The TrfA protein has been shown to bind to five 17-base pair repeat sequences, referred to as iterons, at the minimal replication origin (oriV). Using DNase I footprinting and a gel mobility shift assay, purified DnaA protein was found to bind to four DnaA consensus binding sequences immediately upstream of the five iterons at the RK2 origin of replication. Binding of the TrfA protein to the iterons results in localized strand opening within the A+T-rich region of the replication origin as determined by reactivity of the top and bottom strands to potassium permanganate (KMnO4). The presence of either the E. coli DnaA or HU protein is required for the TrfA-mediated strand opening. Although the DnaA protein itself did not produce an RK2 open complex, it did enhance and/or stabilize the TrfA-induced strand opening.

Protein-DNA interactions in the ori region of the Mycobacterium fortuitum plasmid pAL5000

Plasmid pAL5000 from Mycobacterium fortuitum encodes two proteins necessary for replication: RepA (307 amino acid residues) and RepB (119 residues). A single RNA species encoding these proteins was characterized, and its 5' end was defined. The proteins were expressed as maltose-binding protein fusions in Escherichia coli. The RepB protein was shown in vitro to bind specifically to a previously defined 435-bp region of pAL5000 containing the origin of replication (ori). The precise RepB binding sites were defined by DNase I footprinting experiments. RepB binds to two motifs in the ori region: a high-affinity site within its own promoter region, implying autoregulation of its expression, and a low-affinity site further upstream, presumably the origin of replication itself. The binding to the latter motif seems to occur on one DNA strand only. The high-affinity binding site contains several palindromic sequences. Gel retardation assays were performed with the different binding sites as templates, and the binding constant to each site was estimated from protein titrations. This is the first molecular dissection of mycobacterial DNA-binding proteins and their interactions with their targets.

Copy-up mutants of the plasmid RK2 replication initiation protein are defective in coupling RK2 replication origins

The broad host range plasmid RK2 replicates and regulates its copy number in a wide range of Gram-negative bacteria. The plasmid-encoded trans-acting replication protein TrfA and the origin of replication oriV are sufficient for controlled replication of the plasmid in all Gram-negative bacteria tested. The TrfA protein binds specifically to direct repeat sequences (iterons) at the origin of replication. A replication control model, designated handcuffing or coupling, has been proposed whereby the formation of coupled TrfA-oriV complexes between plasmid molecules results in hindrance of origin activity and, consequently, a shut-down of plasmid replication under conditions of higher than normal copy number. Therefore, according to this model, the coupling activity of an initiation protein is essential for copy number control and a copy-up initiation protein mutant should have reduced ability to form coupled complexes. To test this model for plasmid RK2, two previously characterized copy-up TrfA mutations, trfA-254D and trfA-267L, were combined and the resulting copy-up double mutant TFrfA protein TrfA-254D/267L was characterized. Despite initiating runaway (uncontrolled) replication in vivo, the copy-up double-mutant TrfA protein exhibited replication kinetics similar to the wild-type protein in vitro. Purified TrfA-254D, TrfA-267L, and TrfA-254D/267L proteins were then examined for binding to the iterons and for coupling activity using an in vitro ligase-catalyzed multimerization assay. It was found that both single and double TrfA mutant proteins exhibited substantially reduced (single mutants) or barely detectable (double mutant) levels of coupling activity while not being diminished in their capacity to bind to the origin of replication. These observations provide direct evidence in support of the coupling model of replication control.

The plasmid RK2 initiation protein binds to the origin of replication as a monomer

The TrfA protein encoded by the broad host range bacterial plasmid RK2 specifically binds to eight direct repeats (iterons) present at the plasmid replication origin to initiate DNA replication. Purified TrfA protein is largely in the form of a dimer, and using a dimerization test system that involves the fusion of the amino-terminal domain of the lambda cI repressor protein to TrfA, we show that the TrfA protein forms dimers in vivo. Because of the high stability of the dimer form of TrfA, the formation of heterodimers between the wild-type and different sized TrfA proteins requires in vivo de novo folding of the primary protein sequence or in vitro denaturation and renaturation. The results of gel mobility shift assays using in vitro or in vivo formed heterodimers indicated that the TrfA protein binds to the iteron DNA as a monomer. Furthermore, when the monomeric and dimeric forms of TrfA are separated by gel filtration chromatography, only the protein in the chromatographic position of the monomeric form demonstrated significant DNA binding activity. These results indicate that only the monomer form of the TrfA protein is active for binding to the iterons at the RK2 replication origin.

Evolution of the korA-oriV segment of promiscuous IncP plasmids

Plasmids belonging to Escherichia coli incompatibility group P are of particular interest because they can transfer between, and be stably maintained in, almost all Gram-negative bacterial species. The segment of the IncP alpha plasmid genome between the key regulatory gene korA and the vegetative replication origin, oriV, encodes a series of operons co-regulated with replication and transfer functions by the KorA protein. To determine which of these genes are likely to have an important role in IncP plasmid survival the equivalent region of the distantly related IncP beta plasmid R751 was sequenced. Sequence comparisons show that the kla operon (formerly the kilA locus, which is also responsible for a cryptic tellurite-resistance determinant) is completely absent from R751. Similarly in the kle region, which encodes genes associated with the KilE+ phenotype of unknown function, kleC and kleD, which we proposed arose by a duplication of kleA and kleB, are also completely absent. The genes that are conserved are klcA (formerly kilC, responsible for the KilC+, and recently proposed to be involved in overcoming restriction barriers during transfer), klcB (an ORF interrupted by Tn1 insertion in RK2), korC (a transcriptional repressor which controls the klcK and kle operons), and kleA, kleB, kleE and kleF. A striking feature of the organization in R751 is the lack of the strong transcriptional termination signals which are present in IncP alpha plasmids. The degree of divergence between the plasmids facilitates the identification of motifs of probable functional importance in the primary protein sequences.

Plasmid pT181 replication is decreased at high levels of RepC per plasmid copy

The replication of staphylococcal plasmid pT181 is indirectly controlled at the level of the synthesis of its replication initiator, RepC. As a result, high levels of RepC synthesis per plasmid copy were expected to lead to autocatalytic plasmid replication, which secondarily would affect host physiology. Surprisingly, RepC overexpression was found to lead to a rapid decrease in pT181 copy number and replication rate. These effects depended on the ratio of RepC to the pT181 replication origin rather than on the absolute amount of RepC in the cell. In a wild-type host, the increase in RepC/plasmid copy also inhibited chromosome replication and cell division. The changes in host physiology did not play any role in the decrease in pT181 replication caused by RepC overexpression since pT181 replication responded in the same way in a host mutant insensitive to the effects of RepC induction. These results suggest that pT181, the prototype of an entire class of plasmids from Gram-positive bacteria, responds to overexpression of its replication initiator by a decrease in plasmid replication.

Binding of DnaA protein to a replication enhancer counteracts the inhibition of plasmid R6K gamma origin replication mediated by elevated levels of R6K pi protein

Replication of the gamma origin of Escherichia coli plasmid R6K requires pi protein, encoded by the R6K pir gene, and many host factors, including DnaA protein. Pi has dual roles, activating replication at low levels and inhibiting replication at high levels. The inhibitory function of pi is counteracted by integration host factor and a specific sequence of the origin called the enhancer. This 106-bp DNA segment contains a binding site for DnaA protein (DnaA box 1). In this study, we mutated this site to determine if it was required for the enhancer's function. Using gamma origin derivative plasmids with the DnaA box 1 altered or deleted, we show that this site is necessary to protect the origin against levels of wild-type pi protein that would otherwise inhibit replication. To show that the base substitutions in DnaA box 1 weakened the binding of DnaA, we developed a new application of the agarose gel retardation assay. This quick and easy assay has broad applicability, as shown in binding studies with DNA fragments carrying a different segment of the R6K origin, the chromosomal origin (oriC), or the pUC origin. The gel retardation assay suggests a stoichiometry of DnaA binding different from that deduced from other assays.