Expression and partial purification of enzymatically active recombinant Ty1 integrase in Saccharomyces cerevisiae

A proteomic screen of Ty1 integrase partners identifies the protein kinase CK2 as a regulator of Ty1 retrotransposition

Background

Transposable elements are ubiquitous and play a fundamental role in shaping genomes during evolution. Since excessive transposition can be mutagenic, mechanisms exist in the cells to keep these mobile elements under control. Although many cellular factors regulating the mobility of the retrovirus-like transposon Ty1 in Saccharomyces cerevisiae have been identified in genetic screens, only very few of them interact physically with Ty1 integrase (IN).

Results

Here, we perform a proteomic screen to establish Ty1 IN interactome. Among the 265 potential interacting partners, we focus our study on the conserved CK2 kinase. We confirm the interaction between IN and CK2, demonstrate that IN is a substrate of CK2 in vitro and identify the modified residues. We find that Ty1 IN is phosphorylated in vivo and that these modifications are dependent in part on CK2. No significant change in Ty1 retromobility could be observed when we introduce phospho-ablative mutations that prevent IN phosphorylation by CK2 in vitro. However, the absence of CK2 holoenzyme results in a strong stimulation of Ty1 retrotransposition, characterized by an increase in Ty1 mRNA and protein levels and a high accumulation of cDNA.

Conclusion

Our study shows that Ty1 IN is phosphorylated, as observed for retroviral INs and highlights an important role of CK2 in the regulation of Ty1 retrotransposition. In addition, the proteomic approach enabled the identification of many new Ty1 IN interacting partners, whose potential role in the control of Ty1 mobility will be interesting to study.

Ty1 integrase is composed of an active N-terminal domain and a large disordered C-terminal module dispensable for its activity in vitro

Long-terminal repeat (LTR) retrotransposons are genetic elements that, like retroviruses, replicate by reverse transcription of an RNA intermediate into a complementary DNA (cDNA) that is next integrated into the host genome by their own integrase. The Ty1 LTR retrotransposon has proven to be a reliable working model to investigate retroelement integration site preference. However, the low yield of recombinant Ty1 integrase production reported so far has been a major obstacle for structural studies. Here we analyze the biophysical and biochemical properties of a stable and functional recombinant Ty1 integrase highly expressed in E.coli. The recombinant protein is monomeric and has an elongated shape harboring the three-domain structure common to all retroviral integrases at the N-terminal half, an extra folded region, and a large intrinsically disordered region at the C-terminal half. Recombinant Ty1 integrase efficiently catalyzes concerted integration in vitro, and the N-terminal domain displays similar activity. These studies that will facilitate structural analyses may allow elucidating the molecular mechanisms governing Ty1 specific integration into safe places in the genome.

Retrotransposons. An RNA polymerase III subunit determines sites of retrotransposon integration

Mobile genetic elements are ubiquitous. Their integration site influences genome stability and gene expression. The Ty1 retrotransposon of the yeast Saccharomyces cerevisiae integrates upstream of RNA polymerase III (Pol III)-transcribed genes, yet the primary determinant of target specificity has remained elusive. Here we describe an interaction between Ty1 integrase and the AC40 subunit of Pol III and demonstrate that AC40 is the predominant determinant targeting Ty1 integration upstream of Pol III-transcribed genes. Lack of an integrase-AC40 interaction dramatically alters target site choice, leading to a redistribution of Ty1 insertions in the genome, mainly to chromosome ends. The mechanism of target specificity allows Ty1 to proliferate and yet minimizes genetic damage to its host.

The Ty1 LTR-retrotransposon of budding yeast, Saccharomyces cerevisiae

Long-terminal repeat (LTR)-retrotransposons generate a copy of their DNA (cDNA) by reverse transcription of their RNA genome in cytoplasmic nucleocapsids. They are widespread in the eukaryotic kingdom and are the evolutionary progenitors of retroviruses [1]. The Ty1 element of the budding yeast Saccharomyces cerevisiae was the first LTR-retrotransposon demonstrated to mobilize through an RNA intermediate, and not surprisingly, is the best studied. The depth of our knowledge of Ty1 biology stems not only from the predominance of active Ty1 elements in the S. cerevisiae genome but also the ease and breadth of genomic, biochemical and cell biology approaches available to study cellular processes in yeast. This review describes the basic structure of Ty1 and its gene products, the replication cycle, the rapidly expanding compendium of host co-factors known to influence retrotransposition and the nature of Ty1's elaborate symbiosis with its host. Our goal is to illuminate the value of Ty1 as a paradigm to explore the biology of LTR-retrotransposons in multicellular organisms, where the low frequency of retrotransposition events presents a formidable barrier to investigations of retrotransposon biology.

Ty1 integrase overexpression leads to integration of non-Ty1 DNA fragments into the genome of Saccharomyces cerevisiae

The integrase of the Saccharomyces cerevisiae retrotransposon Ty1 integrates Ty1 cDNA into genomic DNA likely via a transesterification reaction. Little is known about the mechanisms ensuring that integrase does not integrate non-Ty DNA fragments. In an effort to elucidate the conditions under which Ty1 integrase accepts non-Ty DNA as substrate, PCR fragments encompassing a selectable marker gene were transformed into yeast strains overexpressing Ty1 integrase. These fragments do not exhibit similarity to Ty1 cDNA except for the presence of the conserved terminal dinucleotide 5'-TG-CA-3'. The frequency of fragment insertion events increased upon integrase overexpression. Characterization of insertion events by genomic sequencing revealed that most insertion events exhibited clear hallmarks of integrase-mediated reactions, such as 5 bp target site duplication and target site preferences. Alteration of the terminal dinucleotide abolished the suitability of the PCR fragments to serve as substrates. We hypothesize that substrate specificity under normal conditions is mainly due to compartmentalization of integrase and Ty cDNA, which meet in virus-like particles. In contrast, recombinant integrase, which is not confined to virus-like particles, is able to accept non-Ty DNA, provided that it terminates in the proper dinucleotide sequence.

Functional analysis of N-terminal residues of ty1 integrase

The Ty1 retrotransposon of Saccharomyces cerevisiae is comprised of structural and enzymatic proteins that are functionally similar to those of retroviruses. Despite overall sequence divergence, certain motifs are highly conserved. We have examined the Ty1 integrase (IN) zinc binding domain by mutating the definitive histidine and cysteine residues and thirteen residues in the intervening (X(32)) sequence between IN-H22 and IN-C55. Mutation of the zinc-coordinating histidine or cysteine residues reduced transposition by more than 4,000-fold and led to IN and reverse transcriptase (RT) instability as well as inefficient proteolytic processing. Alanine substitution of the hydrophobic residues I28, L32, I37 and V45 in the X(32) region reduced transposition 85- to 688-fold. Three of these residues, L32, I37, and V45, are highly conserved among retroviruses, although their effects on integration or viral infectivity have not been characterized. In contrast to the HHCC mutants, all the X(32) mutants exhibited stable IN and RT, and protein processing and cDNA production were unaffected. However, glutathione S-transferase pulldowns and intragenic complementation analysis of selected transposition-defective X(32) mutants revealed decreased IN-IN interactions. Furthermore, virus-like particles with in-L32A and in-V45A mutations did not exhibit substantial levels of concerted integration products in vitro. Our results suggest that the histidine/cysteine residues are important for steps in transposition prior to integration, while the hydrophobic residues function in IN multimerization.

Cooperation between reverse transcriptase and integrase during reverse transcription and formation of the preintegrative complex of Ty1

Reverse transcriptase (RT) and integrase (IN) play a central role in the replication and transposition of retroelements. Increasing evidence suggests that the interaction between these two enzymes is functional and plays an important role in replication. In the yeast Saccharomyces cerevisiae retrotransposon Ty1, the interaction of IN with RT is critical for the formation of an active conformation of RT. We show here that the RT associated with VLPs is active only if it is in close interaction with IN. To probe the IN-RT cis-trans relationship, we have used a complementation assay based on coexpressing two transposons. We show that IN acts in cis to activate RT and that a functional integrase provided in trans is not able to complement replication and transposition defects of IN deletion or IN active-site mutant elements. Our data support a model in which IN not only interacts closely with RT during reverse transcription but also remains associated with RT during the formation of the preintegrative complex.

Reverse transcriptase and integrase of the Saccharomyces cerevisiae Ty1 element

Integrase (IN) and reverse transcriptase (RT) play a central role in transposition of retroelements. The mechanism of integration by IN and the steps of the replication process mediated by RT are briefly described here. Recently, active recombinant forms of Ty1 IN and RT have been obtained. This has allowed a more detailed understanding of their biochemical and structural properties and has made possible combined in vitro and in vivo analyses of their functions. A focus of this review is to discuss some of the results obtained thus far with these two recombinant proteins and to propose future directions.

Genes of the Pseudoviridae (Ty1/copia retrotransposons)

A comprehensive survey of the Pseudoviridae (Ty1/copia) retroelement family was conducted using the GenBank sequence database and completed genome sequences of several model organisms. Plant genomes were the most abundant sources of Pseudoviridae, with the Arabidopsis thaliana genome having 276 distinct elements. A reverse transcriptase amino acid sequence phylogeny indicated that the Pseudoviridae comprises highly divergent members. Coding sequences for a representative subset of elements were analyzed to identify conserved domains and differences that may underlie functional divergence. With the exception of some fungal elements (e.g., Ty1), most Pseudoviridae encode Gag and Pol on a single open reading frame. In addition to the nearly ubiquitous RNA-binding motif of nucleocapsid, three new conserved domains were identified in Gag. pol-encoded aspartic protease was similar to the retroviral enzyme and could be mapped onto the HIV-1 structure. Pol was highly conserved throughout the family. The greatest divergence among Pol sequences was seen in the C-terminus of integrase (IN). We defined a large motif (GKGY) after the IN catalytic domain that is unique to the Pseudoviridae. Additionally, the extreme C-terminus of IN is rich in simple sequence motifs. A distinct lineage of Pseudoviridae in plants have envlike genes. This lineage has undergone a large expansion of Gag characterized by an alpha-helix-rich domain containing coiled-coil motifs. In several elements, this domain is flanked on both sides by RNA-binding domains. We propose that this monophyletic lineage defines a new Pseudoviridae genus, herein referred to as the AGROVIRUS:

A Ty1 reverse transcriptase active-site aspartate mutation blocks transposition but not polymerization

Reverse transcriptases (RTs) are found in a wide variety of mobile genetic elements including viruses, retrotransposons, and infectious organellar introns. An invariant triad of aspartates is thought to be required for the catalytic function of RTs. We generated RT mutants in the yeast retrotransposon Ty1, changing each of these active-site aspartates to asparagine or glutamate. All but one of the mutants lacked detectable polymerase activity. The novel exception, D(211)N, retained near wild-type in vitro polymerase activity within virus-like particles but failed to carry out in vivo transposition. For this mutant, minus-strand synthesis is impaired and formation of the plus-strand strong-stop intermediate is eliminated. Intragenic second-site suppressor mutations of the transposition defect map to the RNase H domain of the enzyme. Our results demonstrate that one of the three active-site aspartates in a retrotransposon RT is not catalytically critical. This implies a basic difference in the polymerase active-site geometry of Ty1 and human immunodeficiency virus RT and shows that subtle mutations in one domain can cause dramatic functional effects on a distant domain of the same enzyme.

Ty1 proteolytic cleavage sites are required for transposition: all sites are not created equal

The retroviral protease is a key enzyme in a viral multienzyme complex that initiates an ordered sequence of events leading to virus assembly and propagation. Viral peptides are initially synthesized as polyprotein precursors; these precursors undergo a number of proteolytic cleavages executed by the protease in a specific and presumably ordered manner. To determine the role of individual protease cleavage sites in Ty1, a retrotransposon from Saccharomyces cerevisiae, the cleavage sites were systematically mutagenized. Altering the cleavage sites of the yeast Ty1 retrotransposon produces mutants with distinct retrotransposition phenotypes. Blocking the Gag/PR site also blocks cleavage at the other two cleavage sites, PR/IN and IN/RT. In contrast, mutational block of the PR/IN or IN/RT sites does not prevent cleavage at the other two sites. Retrotransposons with mutations in each of these sites have transposition defects. Mutations in the PR/IN and IN/RT sites, but not in the Gag/PR site, can be complemented in trans by endogenous Ty1 copies. Hence, the digestion of the Gag/PR site and release of the protease N terminus is a prerequisite for processing at the remaining sites; cleavage of PR/IN is not required for the cleavage of IN/RT, and vice versa. Of the three cleavage sites in the Gag-Pol precursor, the Gag/PR site is processed first. Thus, Ty1 Gag-Pol processing proceeds by an ordered pathway.

Correct integration of model substrates by Ty1 integrase

The retrovirus-like mobile genetic element of Saccharomyces cerevisiae, Ty1, transposes to new genomic locations via the element-encoded integrase (IN). Here we report that purified recombinant IN catalyzed correct integration of a linear DNA into a supercoiled target plasmid. Ty1 virus-like particles (VLPs) integrated donor DNA more efficiently than IN. VLP and IN-mediated insertions occurred at random sites in the target. Mg(2+) was preferred over Mn(2+) for correct integration, and neither cation enhanced nonspecific nuclease activity of IN. Products consistent with correct integration events were also obtained by Southern analysis. Recombinant IN and VLPs utilized many, but not all, linear donor fragments containing non-Ty1 ends, including a U3 mutation which has been shown to be defective for transposition in vivo. Together, our results suggest that IN is sufficient for Ty1 integration in vitro and IN interacts with exogenous donors less stringently than with endogenous elements.

Expression of an active form of recombinant Ty1 reverse transcriptase in Escherichia coli: a fusion protein containing the C-terminal region of the Ty1 integrase linked to the reverse transcriptase-RNase H domain exhibits polymerase and RNase H activities

Replication of the Saccharomyces cerevisiae Ty1 retrotransposon requires a reverse transcriptase capable of synthesizing Ty1 DNA. The first description of an active form of a recombinant Ty1 enzyme with polymerase and RNase H activities is reported here. The Ty1 enzyme was expressed as a hexahistidine-tagged fusion protein in Escherichia coli to facilitate purification of the recombinant protein by metal-chelate chromatography. Catalytic activity of the recombinant protein was detected only when amino acid residues encoded by the integrase gene were added to the N-terminus of the reverse transcriptase-RNase H domain. This suggests that the integrase domain could play a role in proper folding of reverse transcriptase. Several biochemical properties of the Ty1 enzyme were analysed, including the effect of MgCl(2), NaCl, temperature and of the chain terminator dideoxy GTP on its polymerase activity. RNase H activity was examined by monitoring the cleavage of a RNA-DNA template-primer. Our results suggest that the distance between the RNase H and polymerase active sites corresponds to the length of a 14-nucleotide RNA-DNA heteroduplex. The recombinant protein produced in E. coli should be useful for further biochemical and structural analyses and for a better understanding of the role of integrase in the activation of reverse transcriptase.

Substrate recognition by retroviral integrases

Substrate recognition by the retroviral IN enzyme is critical for retroviral integration. To catalyze this recombination event, IN must recognize and act on two types of substrates, viral DNA and host DNA, yet the necessary interactions exhibit markedly different degrees of specificity. Although particular sequences at the viral DNA termini are recognized by IN, many host DNA sequences can serve as the target for integration. Over the last decade, both in vitro and in vivo data have contributed to our understanding of how IN recognizes its substrates. This review provides an overview of the sequence and structure requirements for recognition of viral and host DNA by different retroviral INs and discusses recent progress in mapping protein domains involved in these interactions.

Hybrid Ty1/HIV-1 elements used to detect inhibitors and monitor the activity of HIV-1 reverse transcriptase

We previously demonstrated that hybrid retrotransposons composed of the yeast Ty1 element and the reverse transcriptase (RT) of HIV-1 are active in the yeast Saccharomyces cerevisiae. The RT activity of these hybrid Ty1/HIV-1 (his3AI/AIDS RT; HART) elements can be monitored by using a simple genetic assay. HART element reverse transcription depends on both the polymerase and RNase H domains of HIV-1 RT. Here we demonstrate that the HART assay is sensitive to inhibitors of HIV-1 RT. (-)-(S)-8-Chloro-4,5,6, 7-tetrahydro-5-methyl-6-(3-methyl-2-butenyl)imidazo[4,5,1-jk][1, 4]-benzodiazepin-2(1H)-thione monohydrochloride (8 Cl-TIBO), a well characterized non-nucleoside RT inhibitor (NNRTI) of HIV-1 RT, blocks propagation of HART elements. HART elements that express NNRTI-resistant RT variants of HIV-1 are insensitive to 8 Cl-TIBO, demonstrating the specificity of inhibition in this assay. HART elements carrying NNRTI-resistant variants of HIV-1 RT can be used to identify compounds that are active against drug-resistant viruses.

A single amino acid change in the yeast retrotransposon Ty5 abolishes targeting to silent chromatin

Many retrotransposons and retroviruses are thought to select integration sites through interactions with specific chromosomal proteins. In yeast, the Ty5 retrotransposon integrates preferentially with regions bound by silent chromatin, namely the telomeres and the HMR and HML mating loci. A Ty5 mutant (M3) was identified with an approximately 20-fold decrease in targeted integration as measured by a plasmid-based targeting assay. Often chromosomal insertions generated by M3, none were located at the telomeres or silent mating loci. A single amino acid change at the boundary of integrase and reverse transcriptase is responsible for the mutant phenotype. We predict that this mutation lies within a targeting domain that mediates Ty5 target choice by interacting with a component of silent chromatin.

A Ty1 integrase nuclear localization signal required for retrotransposition

Ty1 retrotransposition in Saccharomyces cerevisiae requires integrase (IN)-mediated insertion of Ty1 cDNA into the host genome. The transposition components are assembled in the cytoplasm and must cross the nuclear envelope to reach the genomic target, since, unlike animal cell nuclear membranes, the yeast cell nuclear membrane remains intact throughout the cell cycle. We have identified a bipartite nuclear localization signal (NLS) in IN required for Ty1 transposition (Ty1 IN) that directs IN to the nucleus. Mutations in the NLS that specifically abolish nuclear localization inactivate transpositional integration but do not affect reverse transcription, protein processing, or catalytic activity in vitro. No additional Ty1-encoded proteins are required for IN nuclear localization. Intragenic complementation experiments suggest that Ty1 IN functions as a multimer and contains two distinct domains, one required for integration and the other for nuclear localization. Nuclear targeting of the preintegration complex by an IN NLS may prove to be a general strategy used by retrotransposons and retroviruses that infect nondividing cells.

The application of a homologous recombination assay revealed amino acid residues in an LTR-retrotransposon that were critical for integration

Retroviruses and their relatives, the LTR-retrotransposons, possess an integrase protein (IN) that is required for the insertion of reverse transcripts into the genome of host cells. Schizosaccharomyces pombe is the host of Tf1, an LTR-retrotransposon with integration activity that can be studied by using techniques of yeast genetics. In this study, we sought to identify amino acid substitutions in Tf1 that specifically affected the integration step of transposition. In addition to seeking amino acid substitutions in IN, we also explored the possibility that other Tf1 proteins contributed to integration. By comparing the results of genetic assays that monitored both transposition and reverse transcription, we were able to seek point mutations throughout Tf1 that blocked transposition but not the synthesis of reverse transcripts. These mutant versions of Tf1 were candidates of elements that possessed defects in the integration step of transposition. Five mutations in Tf1 that resulted in low levels of integration were found to be located in the IN protein: two substitutions in the N-terminal Zn domain, two in the catalytic core, and one in the C-terminal domain. These results suggested that each of the three IN domains was required for Tf1 transposition. The potential role of these five amino acid residues in the function of IN is discussed. Two of the mutations that reduced integration mapped to the RNase H (RH) domain of Tf1 reverse transcriptase. The Tf1 elements with the RH mutations produced high levels of reverse transcripts, as determined by recombination and DNA blot analysis. These results indicated that the RH of Tf1 possesses a function critical for transposition that is independent of the accumulation of reverse transcripts.

Retrovirus-like end processing of the tobacco Tnt1 retrotransposon linear intermediates of replication

The tobacco retrotransposon Tnt1 can transpose through an RNA intermediate in the heterologous host Arabidopsis thaliana. We report here the identification and characterization of extrachromosomal linear and circular DNA forms of Tnt1 in this heterologous host. Our results demonstrate that Tnt1 linear intermediates possess two extra base pairs at each end compared with Tnt1's integrated forms. Prior to integration into the host genome, the two terminal nucleotides at the 3' end of these linear intermediates are removed, as in the case of the yeast Ty3 retrotransposon and of retroviruses. Our data, together with those from recent studies of Ty3, reinforce the idea that 3' dinucleotide cleavage is not restricted to retroviral integrases and is probably a feature shared by many different retrotransposons' enzymes.

Increased length of long terminal repeats inhibits Ty1 transposition and leads to the formation of tandem multimers

The Ty1 retrotransposon of Saccharomyces cerevisiae is bounded by long-terminal repeats (LTRs). We have constructed a variety of Ty1 elements in which the LTR length has been increased from the normal length of 334 bp to > 2 kb. Although small insertions in the LTR have minimal effects on transposition frequency, larger insertions dramatically reduce it. Nevertheless, elements with long LTRs are incorporated into the genome at a low frequency. Most of these rare insertion events represent Ty1 tandem (head to tail) multimers.

A critical proteolytic cleavage site near the C terminus of the yeast retrotransposon Ty1 Gag protein

Cleavage of the Gag and Gag-Pol polyprotein precursors is a critical step in proliferation of retroviruses and retroelements. The Ty1 retroelement of Saccharomyces cerevisiae forms virus-like particles (VLPs) made of the Gag protein. Ty1 Gag is not obviously homologous to the Gag proteins of retroviruses. The apparent molecular mass of Gag is reduced from 58 to 54 kDa during particle maturation. Antibodies raised against the C-terminal peptide of Gag react with the 58-kDa polypeptide but not with the 54-kDa one, indicating that Gag is proteolytically processed at the C terminus. A protease cleavage site between positions 401 and 402 of the Gag precursor was defined by carboxy-terminal sequencing of the processed form of Gag. Certain deletion and substitution mutations in the C terminus of the Gag precursor result in particles that are two-thirds the diameter of the wild-type VLPs. While the Ty1 protease is active in these mutants, their transposition rates are decreased 20-fold compared with that of wild-type Ty1. Thus, the Gag C-terminal portion, released in the course of particle maturation, probably plays a significant role in VLP morphogenesis and Ty1 transposition.

Ty3 integrase mutants defective in reverse transcription or 3'-end processing of extrachromosomal Ty3 DNA

Ty3, a retroviruslike element in Saccharomyces cerevisiae, encodes an integrase (IN) which is essential for position-specific transposition. The Ty3 integrase contains the highly conserved His-Xaa(3-7)-His-Xaa(23-32)-Cys-Xaa(2)-Cys and Asp, Asp-Xaa(35)-Glu [D,D(35)E] motifs found in retroviral integrases. Mutations were introduced into the coding region for the Ty3 integrase to determine the effects in vivo of changes in conserved residues of the putative catalytic triad D,D(35)E and the nonconserved carboxyl-terminal region. Ty3 viruslike particles were found to be associated with significant amounts of linear DNA of the approximate size expected for a full-length reverse transcription product and with plus-strand strong-stop DNA. The full-length, preintegrative DNA has at each 3' end 2 bp that are removed prior to or during integration. Such 3'-end processing has not been observed for other retroviruslike elements. A mutation at either D-225 or E-261 of the Ty3 integrase blocked transposition and prevented processing of the 3' ends of Ty3 DNA in vivo, suggesting that the D,D(35)E region is part of the catalytic domain of Ty3 IN. Carboxyl-terminal deletions of integrase caused a dramatic reduction in the amount of Ty3 DNA in vivo and a decrease in reverse transcriptase activity in vitro but did not affect the apparent size or amount of the 55-kDa reverse transcriptase in viruslike particles. The 115-kDa viruslike particle protein, previously shown to react with antibodies to Ty3 integrase, was shown to be a reverse transcriptase-IN fusion protein. These results are consistent with a role for the integrase domain either in proper folding of reverse transcriptase or as part of a heterodimeric reverse transcriptase molecule.

Integration of the yeast retrotransposon Ty1 is targeted to regions upstream of genes transcribed by RNA polymerase III

Retroviruses and their relatives, the LTR-containing retrotransposons, integrate newly replicated cDNA copies of their genomes into the genomes of their hosts using element-encoded integrases. Although target site selection is not well understood for this general class of elements, it is becoming clear that some elements target their integration events to very specific regions of their host genomes. Evidence is accumulating that the yeast retrotransposon Ty1 behaves in this manner. Ty1 is found frequently adjacent to tRNA genes in the yeast genome and experimental evidence implicates these regions as preferred integration sites. To determine the basis for Ty1 targeting, we developed an in vivo integration assay using a Ty1 donor plasmid and a second target plasmid that could be used to measure the relative frequency of Ty1 integration into sequences cloned from various regions of the yeast genome. Targets containing genes transcribed by RNA polymerase III (Pol III) were up to several hundredfold more active as integration targets than "cold" sequences lacking such genes. High-frequency targeting was dependent on Pol III transcription, and integration was "region specific," occurring exclusively upstream of the transcription start sites of these genes. Thus, Ty1 has evolved a powerful targeting mechanism, requiring Pol III transcription to integrate its DNA at very specific locations within the yeast genome.

Substrate specificity of Ty1 integrase

Integration of the Saccharomyces cerevisiae retrotransposon Ty1 requires the element-encoded integrase (IN) protein, which is a component of cytoplasmic virus-like particles (VLPs). Using purified recombinant Ty1 IN and an oligonucleotide integration assay based on Ty1 long terminal repeat sequences, we have compared IN activity on substrates having either wild-type or altered donor ends. IN showed a marked preference for blunt-end substrates terminating in an A:T pair over substrates ending in a G:C pair or a 3' dideoxyadenosine. VLP activity on representative substrates also showed preference for donor strands which have an adenosine terminus. Staggered-end substrates showed little activity when nucleotides were removed from the end of the wild-type donor strand, but removal of one nucleotide from the complementary strand did not significantly diminish activity. Removal of additional nucleotides from the complementary strand reduced activity to minimal detection levels. These results suggest that the sequence specificity of Ty1 IN is not stringent in vitro. The absence of Ty1 IN-mediated 3' dinucleotide cleavage, a characteristic of retroviral integrases, was demonstrated by using selected substrates. In addition to the forward reaction, both recombinant IN and VLP-associated IN carry out the reverse disintegration reaction with long terminal repeat-based dumbbell substrates. Disintegration activity exhibits sequence preferences similar to those observed for the forward reaction.

In vitro integration of retrotransposon Ty1: a direct physical assay

Retrotransposon Ty1 of Saccharomyces cerevisiae inserts a double-stranded Ty1 cDNA into the yeast genome by a reaction analogous to the integration mechanism used by retroviruses. A quantitative in vitro integration assay that directly detects integrative recombination products was developed for Ty1. Blunt-ended artificial radioactive substrates bearing Ty1 termini integrate into circular or linear target DNAs. The reaction is specific for native integrase isolated in the form of virus-like particles; virus-like particles prepared from integrase mutants were completely inactive in this assay. The products are radioactive, allowing direct detection after gel electrophoresis by autoradiography. Using this simple and amenable system, we characterized the biochemical requirements of the system and the structures of the major integration products. Two classes of products were detected: those that were the result of bona fide complete integration events (concerted reactions) and single-end joinings of substrate to target (half-reactions). Additionally, we used a genetic selection scheme to identify and characterize target sites of complete integration events into a circular target plasmid; a 5-bp target site duplication flanking the inserted DNA resembling the duplication characteristic of in vivo integration was observed.

Ty1 in vitro integration: effects of mutations in cis and in trans

Mutations within the TYB gene of Ty1 encoding integrase (IN) as well as alterations in its substrate, a linear DNA molecule, were examined for their effects on in vitro IN activity, using a recently developed physical assay. Five different codon-insertion mutations, two frameshift mutations, and one missense mutation, previously identified as transposition-deficient mutations, were tested. Virus-like particles, the source of IN, from two different protease mutants and a reverse transcriptase mutant exhibited near-normal to normal IN activity. Two frameshift mutations mapping within the phylogenetically variable C-terminal domain of IN resulted in significant in vitro IN activity. In contrast, three mutations within the amino-terminal conserved domain of IN completely abolished IN activity. When the substrate termini were mutated, we found that substrates with as few as 4 bp of Ty1 termini were capable of efficiently generating integration products. Surprisingly, certain substrates that lacked obvious similarity to Ty1 termini were also readily integrated into both linear and circular targets, whereas others were not used as substrates at all. Termini rich in adenosine residues were among the more active substrates; however, certain substrates lacking terminal adenosine residues can form small quantities of integration products, including complete integration reactions.

Efficient integration of artificial transposons into plasmid targets in vitro: a useful tool for DNA mapping, sequencing and genetic analysis

We have developed efficient methods for creating artificial transposons and inserting these transposons into plasmid targets in vitro, primarily for the purpose of DNA mapping and sequencing. A novel plasmid has been engineered to convert virtually any DNA sequence, or combination of sequences, into an artificial transposon; hence, custom transposons containing any desired feature can be easily designed and constructed. Such transposons are then efficiently inserted into plasmid targets, in vitro, using the integrase activity present in yeast Ty1 virus-like particles. A single in vitro integration reaction, which resembles a simple restriction digestion in the complexity of the reaction, gives rise to thousands of recoverable insertion events within DNA target molecules; this frequency approaches one insertion per phosphodiester bond in typical plasmids. Importantly, transposon insertions are recovered from all regions of DNA inserts carried on plasmid targets, indicating that integration is a random or nearly-random process. Because of its versatility, this technology offers a generalized method of generating recombinant DNA molecules of a desired structure. We have adapted this system for DNA sequencing by developing a customized artificial transposon to insert new primer binding sites into internal regions of DNA inserts carried on cloning vectors. Transposon insertions have been generated throughout several different yeast and human DNA inserts carried on plasmids, allowing the efficient recovery of sequence information from these inserts. Our results demonstrate the overall utility of this method for both small and large-scale DNA sequencing, as well as general DNA restructuring, and indicate that it could be adapted for use with a number of additional applications including functional genetic analysis.

Ty1 in vitro integration: effects of mutations in cis and in trans

Mutations within the TYB gene of Ty1 encoding integrase (IN) as well as alterations in its substrate, a linear DNA molecule, were examined for their effects on in vitro IN activity, using a recently developed physical assay. Five different codon-insertion mutations, two frameshift mutations, and one missense mutation, previously identified as transposition-deficient mutations, were tested. Virus-like particles, the source of IN, from two different protease mutants and a reverse transcriptase mutant exhibited near-normal to normal IN activity. Two frameshift mutations mapping within the phylogenetically variable C-terminal domain of IN resulted in significant in vitro IN activity. In contrast, three mutations within the amino-terminal conserved domain of IN completely abolished IN activity. When the substrate termini were mutated, we found that substrates with as few as 4 bp of Ty1 termini were capable of efficiently generating integration products. Surprisingly, certain substrates that lacked obvious similarity to Ty1 termini were also readily integrated into both linear and circular targets, whereas others were not used as substrates at all. Termini rich in adenosine residues were among the more active substrates; however, certain substrates lacking terminal adenosine residues can form small quantities of integration products, including complete integration reactions.

In vitro integration of retrotransposon Ty1: a direct physical assay

Retrotransposon Ty1 of Saccharomyces cerevisiae inserts a double-stranded Ty1 cDNA into the yeast genome by a reaction analogous to the integration mechanism used by retroviruses. A quantitative in vitro integration assay that directly detects integrative recombination products was developed for Ty1. Blunt-ended artificial radioactive substrates bearing Ty1 termini integrate into circular or linear target DNAs. The reaction is specific for native integrase isolated in the form of virus-like particles; virus-like particles prepared from integrase mutants were completely inactive in this assay. The products are radioactive, allowing direct detection after gel electrophoresis by autoradiography. Using this simple and amenable system, we characterized the biochemical requirements of the system and the structures of the major integration products. Two classes of products were detected: those that were the result of bona fide complete integration events (concerted reactions) and single-end joinings of substrate to target (half-reactions). Additionally, we used a genetic selection scheme to identify and characterize target sites of complete integration events into a circular target plasmid; a 5-bp target site duplication flanking the inserted DNA resembling the duplication characteristic of in vivo integration was observed.