Characterization of human type III collagen expressed in a baculovirus system. Production of a protein with a stable triple helix requires coexpression with the two types of recombinant prolyl 4-hydroxylase subunit

Recombinant keratin: Comprehensive review of synthesis, hierarchical assembly, properties, and applications

Keratin has gained attention for its remarkable mechanical properties, thermal stability, and beneficial biological properties, such as promoting hemostasis and wound healing. Traditionally, keratin has been extracted from natural sources, including human hair, wool, and feathers, and processed into biomaterials, including films, hydrogels, and nanoparticles, primarily for biomedical applications. However, extraction methods often result in heterogeneous keratin mixtures with residual impurities and structural degradation due to harsh purification conditions, complicating efforts to understand how specific keratins and their hierarchical assemblies contribute to desired material properties. Recombinant keratin technology addresses these challenges by enabling the synthesis of individual keratin types with high purity and batch-to-batch consistency. These advancements facilitate studies on how individual and combined keratins at various assembly stagesfrom molecular components and heterodimers to intermediate filaments (IFs) and IF networksimpact material properties. Moreover, this technology allows for precise genetic modifications, potentially leading to engineered keratin variants with tailored characteristics for targeted applications. Despite these advantages, translating recombinant keratin into practical applications requires overcoming key manufacturing challenges, such as optimizing large-scale production and improving purification efficiency. This review presents the current state of recombinant keratin research by highlighting its advancements and exploring current biomaterial applications. While its applications remain limited compared to extracted keratin at this early stage, its potential offers future opportunities for extending its use in advanced material design and beyond biomedical fields. STATEMENT OF SIGNIFICANCE: Keratin and keratinized structures provide essential protection to tissues against mechanical stress and environmental damage, serving as foundational elements across diverse biological systems. This review discusses advancements in recombinant keratin technology, enabling high-purity, reproducible synthesis with controlled composition modifications that effectively overcome the limitations of traditional extraction methods. The innovations deepen our understanding of hierarchical assembly in keratin structures across various length scales, along with their reinforcing mechanisms and mechanical and biofunctional properties. These insights lay the groundwork for biomaterials tailored to regenerative medicine, wound healing, and other biomedical applications. By focusing on the unique capabilities of recombinant keratin, this review offers a valuable resource for future advancements in high-performance biomaterials across biomedical and biotechnological fields.

Recombinant fibrous protein biomaterials meet skin tissue engineering

Natural biomaterials, particularly fibrous proteins, are extensively utilized in skin tissue engineering. However, their application is impeded by batch-to-batch variance, limited chemical or physical versatility, and environmental concerns. Recent advancements in gene editing and fermentation technology have catalyzed the emergence of recombinant fibrous protein biomaterials, which are gaining traction in skin tissue engineering. The modular and highly customizable nature of recombinant synthesis enables precise control over biomaterial design, facilitating the incorporation of multiple functional motifs. Additionally, recombinant synthesis allows for a transition from animal-derived sources to microbial sources, thereby reducing endotoxin content and rendering recombinant fibrous protein biomaterials more amenable to scalable production and clinical use. In this review, we provide an overview of prevalent recombinant fibrous protein biomaterials (collagens, elastin, silk proteins and their chimeric derivatives) used in skin tissue engineering (STE) and compare them with their animal-derived counterparts. Furthermore, we discuss their applications in STE, along with the associated challenges and future prospects.

Green biomanufacturing in recombinant collagen biosynthesis: trends and selection in various expression systems

Collagen, classically derived from animal tissue, is an all-important protein material widely used in biomedical materials, cosmetics, fodder, food, etc. The production of recombinant collagen through different biological expression systems using bioengineering techniques has attracted significant interest in consideration of increasing market demand and the process complexity of extraction. Green biomanufacturing of recombinant collagen has become one of the focus topics. While the bioproduction of recombinant collagens (type I, II, III, etc.) has been commercialized in recent years, the biosynthesis of recombinant collagen is extremely challenging due to protein immunogenicity, yield, degradation, and other issues. The rapid development of synthetic biology allows us to perform a heterologous expression of proteins in diverse expression systems, thus optimizing the production and bioactivities of recombinant collagen. This review describes the research progress in the bioproduction of recombinant collagen over the past two decades, focusing on different expression systems (prokaryotic organisms, yeasts, plants, insects, mammalian and human cells, etc.). We also discuss the challenges and future trends in developing market-competitive recombinant collagens.

Co-expression of recombinant human collagen α1(III) chain with viral prolyl 4-hydroxylase in Pichia pastoris GS115

The Collagen α1(Ш) chain (COL3A1) is an important structural protein on the surface of human skin. The activity of prolyl 4-hydroxylase (P4H) is crucial to maintaining the stable triple-helix structure and function of human COL3A1. To obtain hydroxylated human COL3A1, virus-derived P4H A085R was co-expressed with human COL3A1 in Pichia pastoris GS115. Colony PCR analysis and sequencing after transfection confirmed that the target gene was successfully inserted. Quantitative reverse transcription PCR (RT-qPCR) indicated that human COL3A1 and P4H A085R were expressed at mRNA levels in the clones. SDS-PAGE and Western blot analysis of supernatant from the recombinant methylotrophic yeast culture showed that recombinant human COL3A1 (rhCOL3A1) was secreted into the culture medium with an apparent molecular mass of approximately 130 kDa. It was observed that the amount of secreted rhCOL3A1 was highest at 120 h after induction. Furthermore, mass spectrometry analysis demonstrated that rhCOL3A1 was successfully expressed in P. pastoris. The His-tagged rhCOL3A1 protein was purified by Ni-affinity column chromatography.

Collagen- and hyaluronic acid-based hydrogels and their biomedical applications

Hydrogels have been widely investigated in biomedical fields due to their similar physical and biochemical properties to the extracellular matrix (ECM). Collagen and hyaluronic acid (HA) are the main components of the ECM in many tissues. As a result, hydrogels prepared from collagen and HA hold inherent advantages in mimicking the structure and function of the native ECM. Numerous studies have focused on the development of collagen and HA hydrogels and their biomedical applications. In this extensive review, we provide a summary and analysis of the sources, features, and modifications of collagen and HA. Specifically, we highlight the fabrication, properties, and potential biomedical applications as well as promising commercialization of hydrogels based on these two natural polymers.

Human Surfactant Protein SP-A1 and SP-A2 Variants Differentially Affect the Alveolar Microenvironment, Surfactant Structure, Regulation and Function of the Alveolar Macrophage, and Animal and Human Survival Under Various Conditions

The human innate host defense molecules, SP-A1 and SP-A2 variants, differentially affect survival after infection in mice and in lung transplant patients. SP-A interacts with the sentinel innate immune cell in the alveolus, the alveolar macrophage (AM), and modulates its function and regulation. SP-A also plays a role in pulmonary surfactant-related aspects, including surfactant structure and reorganization. For most (if not all) pulmonary diseases there is a dysregulation of host defense and inflammatory processes and/or surfactant dysfunction or deficiency. Because SP-A plays a role in both of these general processes where one or both may become aberrant in pulmonary disease, SP-A stands to be an important molecule in health and disease. In humans (unlike in rodents) SP-A is encoded by two genes (SFTPA1 and SFTPA2) and each has been identified with extensive genetic and epigenetic complexity. In this review, we focus on functional, structural, and regulatory differences between the two SP-A gene-specific products, SP-A1 and SP-A2, and among their corresponding variants. We discuss the differential impact of these variants on the surfactant structure, the alveolar microenvironment, the regulation of epithelial type II miRNome, the regulation and function of the AM, the overall survival of the organism after infection, and others. Although there have been a number of reviews on SP-A, this is the first review that provides such a comprehensive account of the differences between human SP-A1 and SP-A2.

Enhanced Collagen-like Protein for Facile Biomaterial Fabrication

We present a collagen-mimetic protein of bacterial origin based upon a modified subdomain of the collagen-like Sc12 protein from Streptococcus pyogenes, as an alternative collagen-like biomaterial platform that is highly soluble, forms stable, homogeneous, fluid-like solutions at elevated concentrations, and that can be efficiently fabricated into hydrogel materials over a broad range of pH conditions. This extended bacterial collagen-like (eBCL) protein is expressed in a bacterial host and purified as a trimeric assembly exhibiting a triple helical secondary structure in its collagen-like subdomain that is stable near physiological solution conditions (neutral pH and 37 °C), as well as over a broad range of pH conditions. We also show how this sequence can be modified to include biofunctional attributes, in particular, the Arg-Gly-Asp (RGD) sequence to elicit integrin-specific cell binding, without loss of structural function. Furthermore, through the use of EDC-NHS chemistry, we demonstrate that members of this eBCL protein system can be covalently cross-linked to fabricate transparent hydrogels with high protein concentrations (at least to 20% w/w). These hydrogels are shown to possess material properties and resistance to enzymatic degradation that are comparable or superior to a type I collagen control. Moreover, such hydrogels containing the constructs with the RGD integrin-binding sequence are shown to promote the adhesion, spreading, and proliferation of C2C12 and 3T3 cells in vitro. Due to its enhanced solubility, structural stability, fluidity at elevated concentrations, ease of modification, and facility of cross-linking, this eBCL collagen-mimetic system has potential for numerous biomedical material applications, where the ease of processing and fabrication and the facility to tailor the sequence for specific biological functionality are desired.

Integrin α11β1 is a receptor for collagen XIII

Collagen XIII is a conserved transmembrane collagen mainly expressed in mesenchymal tissues. Previously, we have shown that collagen XIII modulates tissue development and homeostasis. Integrins are a family of receptors that mediate signals from the environment into the cells and vice versa. Integrin α11β1 is a collagen receptor known to recognize the GFOGER (O=hydroxyproline) sequence in collagens. Interestingly, collagen XIII and integrin α11β1 both have a role in the regulation of bone homeostasis. To study whether α11β1 is a receptor for collagen XIII, we utilized C2C12 cells transfected to express α11β1 as their only collagen receptor. The interaction between collagen XIII and integrin α11β1 was also confirmed by surface plasmon resonance and pull-down assays. We discovered that integrin α11β1 mediates cell adhesion to two collagenous motifs, namely GPKGER and GF(S)QGEK, that were shown to act as the recognition sites for the integrin α11-I domain. Furthermore, we studied the in vivo significance of the α11β1-collagen XIII interaction by crossbreeding α11 null mice (Itga11-/-) with mice overexpressing Col13a1 (Col13a1oe). When we evaluated the bone morphology by microcomputed tomography, Col13a1oe mice had a drastic bone overgrowth followed by severe osteoporosis, whereas the double mutant mouse line showed a much milder bone phenotype. To conclude, our data identifies integrin α11β1 as a new collagen XIII receptor and demonstrates that this ligand-receptor pair has a role in the maintenance of bone homeostasis.

Three Decades of Research on Recombinant Collagens: Reinventing the Wheel or Developing New Biomedical Products?

Collagens provide the building blocks for diverse tissues and organs. Furthermore, these proteins act as signaling molecules that control cell behavior during organ development, growth, and repair. Their long half-life, mechanical strength, ability to assemble into fibrils and networks, biocompatibility, and abundance from readily available discarded animal tissues make collagens an attractive material in biomedicine, drug and food industries, and cosmetic products. About three decades ago, pioneering experiments led to recombinant human collagens' expression, thereby initiating studies on the potential use of these proteins as substitutes for the animal-derived collagens. Since then, scientists have utilized various systems to produce native-like recombinant collagens and their fragments. They also tested these collagens as materials to repair tissues, deliver drugs, and serve as therapeutics. Although many tests demonstrated that recombinant collagens perform as well as their native counterparts, the recombinant collagen technology has not yet been adopted by the biomedical, pharmaceutical, or food industry. This paper highlights recent technologies to produce and utilize recombinant collagens, and it contemplates their prospects and limitations.

Role of prolyl hydroxylation in the molecular interactions of collagens

Co- and post-translational hydroxylation of proline residues is critical for the stability of the triple helical collagen structure. In this review, we summarise the biology of collagen prolyl 4-hydroxylases and collagen prolyl 3-hydroxylases, the enzymes responsible for proline hydroxylation. Furthermore, we describe the potential roles of hydroxyproline residues in the complex interplay between collagens and other proteins, especially integrin and discoidin domain receptor type cell adhesion receptors. Qualitative and quantitative regulation of collagen hydroxylation may have remarkable effects on the properties of the extracellular matrix and consequently on the cell behaviour.

Sources of Collagen for Biomaterials in Skin Wound Healing

Collagen is the most frequently used protein in the fields of biomaterials and regenerative medicine. Within the skin, collagen type I and III are the most abundant, while collagen type VII is associated with pathologies of the dermal-epidermal junction. The focus of this review is mainly collagens I and III, with a brief overview of collagen VII. Currently, the majority of collagen is extracted from animal sources; however, animal-derived collagen has a number of shortcomings, including immunogenicity, batch-to-batch variation, and pathogenic contamination. Recombinant collagen is a potential solution to the aforementioned issues, although production of correctly post-translationally modified recombinant human collagen has not yet been performed at industrial scale. This review provides an overview of current collagen sources, associated shortcomings, and potential resolutions. Recombinant expression systems are discussed, as well as the issues associated with each method of expression.

Type III collagen (COL3A1): Gene and protein structure, tissue distribution, and associated diseases

Collagen alpha-1(III) chain, also known as the alpha 1 chain of type III collagen, is a protein that in humans is encoded by the COL3A1 gene. Three alpha 1 chains are required to form the type III collagen molecule which has a long triple-helical domain. Type III collagen, an extracellular matrix protein, is synthesized by cells as a pre-procollagen. It is found as a major structural component in hollow organs such as large blood vessels, uterus and bowel. Other functions of type III collagen include interaction with platelets in the blood clotting cascade and it is also an important signaling molecule in wound healing. Mutations in the COL3A1 gene cause the vascular type of Ehlers-Danlos syndrome (vEDS; OMIM 130050). It is the most serious form of EDS, since patients often die suddenly due to a rupture of large arteries. Inactivation of the murine Col3a1 gene leads to a shorter life span in homozygous mutant mice. The mice die prematurely from a rupture of major arteries mimicking the human vEDS phenotype. The biochemical and cellular effects of COL3A1 mutations have been studied extensively. Most of the glycine mutations lead to the synthesis of type III collagen with reduced thermal stability, which is more susceptible for proteinases. Intracellular accumulation of this normally secreted protein is also found. Ultrastructural analyses have demonstrated dilated rough endoplasmic reticulum and changes in the diameter of collagen fibers. Other clinical conditions associated with type III collagen are several types of fibroses in which increased amounts of type III collagen accumulate in the target organs.

Biosynthesis and assembly of the Collagen IV-like protein Pericardin in Drosophila melanogaster

In Drosophila, formation of the cardiac extracellular matrix (ECM) starts during embryogenesis. Assembly and incorporation of structural proteins such as Collagen IV, Pericardin, and Laminin A, B1, and B2 into the cardiac ECM is critical to the maintenance of heart integrity and functionality and, therefore, to longevity of the animal. The cardiac ECM connects the heart tube with the alary muscles; thus, the ECM contributes to a flexible positioning of the heart within the animal's body. Moreover, the cardiac ECM holds the larval pericardial nephrocytes in close proximity to the heart tube and the inflow tract, which is assumed to be critical to efficient haemolymph clearance. Mutations in either structural ECM constituents or ECM receptors cause breakdown of the ECM network upon ageing, with disconnection of the heart tube from alary muscles becoming apparent at larval stages. Finally, the heart becomes non-functional. Here, we characterised existing and new pericardin mutants and investigated biosynthesis, secretion, and assembly of Pericardin in matrices. We identified two new pericardin alleles, which turned out to be a null (pericardin^3-548) and a hypomorphic allele (pericardin^3-21). Both mutants could be rescued with a genomic duplication of a fosmid coding for the pericardin locus. Biochemical analysis revealed that Pericardin is highly glycosylated and forms redox-dependent multimers. Multimer formation is remarkably reduced in animals deficient for the prolyl-4 hydroxylase cluster at 75D3-4.

Summary: We identified two new pericardin alleles. Both mutants could be rescued with a genomic duplication of a fosmid coding for the pericardin locus. Biochemical analysis revealed that Pericardin is highly glycosylated and forms redox-dependent multimers.

A conjugate of jasmonic acid and tetrapeptide Tyr-Tyr-Lys-Ser-NH2 as a potential ingredient for skin care products – synthesis and characterization

A conjugate of jasmonic acid and a tetrapeptide was synthesized and it might be used as a promising active ingredient in topical applications.

Hydroxylation of Human Type III Collagen Alpha Chain by Recombinant Coexpression with a Viral Prolyl 4-Hydroxylase in Escherichia coli

High-level expression of recombinant collagen by genetic engineering is urgently required. Recombinant collagen is different from natural collagen in its hydroxyproline (Hyp) content and thermal stability. To obtain hydroxylated collagen for applications in biomedicine and biomaterials, the human collagen α1(III) chain was co-expressed with the viral prolyl 4-hydroxylase A085R in Escherichia coli. Unlike previous reports using human prolyl 4-hydroxylase, this study examined the hydroxylation of full-length human collagen α1(III) chain (COL3A1) by viral prolyl 4-hydroxylase. The genes encoding these two proteins were controlled by different promoters, Ptac and PRPL, on a recombinant pKK223-3 plasmid. The sequencing results verified that the target genes were successfully inserted into the recombinant vector. Based on quantitative PCR, SDS-PAGE, and western blotting, successful expression by E. coli BL21(DE3) was detected at the mRNA and protein levels for both loci. Liquid chromatography-mass spectrometry (LC-MS/MS) results suggested that the highest Hyp yield was obtained when the two proteins were induced with 0.5 mM IPTG and heat-shock treatment at 50 °C, corresponding to high enzyme expression and low human collagen α1(III) chain expression levels. A biological activity analysis indicated that the recombinant collagen with the highest hydroxylation level supported the growth of baby hamster kidney cells, similar to observations for native collagen. The production of hydroxylated collagen in this study establishes a new method for collagen hydroxylation and provides a basis for the application of recombinant collagen expressed in E. coli.

Severe Extracellular Matrix Abnormalities and Chondrodysplasia in Mice Lacking Collagen Prolyl 4-Hydroxylase Isoenzyme II in Combination with a Reduced Amount of Isoenzyme I

Collagen prolyl 4-hydroxylases (C-P4H-I, C-P4H-II, and C-P4H-III) catalyze formation of 4-hydroxyproline residues required to form triple-helical collagen molecules. Vertebrate C-P4Hs are α2β2 tetramers differing in their catalytic α subunits. C-P4H-I is the major isoenzyme in most cells, and inactivation of its catalytic subunit (P4ha1(-/-)) leads to embryonic lethality in mouse, whereas P4ha1(+/-) mice have no abnormalities. To study the role of C-P4H-II, which predominates in chondrocytes, we generated P4ha2(-/-) mice. Surprisingly, they had no apparent phenotypic abnormalities. To assess possible functional complementarity, we established P4ha1(+/-);P4ha2(-/-) mice. They were smaller than their littermates, had moderate chondrodysplasia, and developed kyphosis. A transient inner cell death phenotype was detected in their developing growth plates. The columnar arrangement of proliferative chondrocytes was impaired, the amount of 4-hydroxyproline and the Tm of collagen II were reduced, and the extracellular matrix was softer in the growth plates of newborn P4ha1(+/-);P4ha2(-/-) mice. No signs of uncompensated ER stress were detected in the mutant growth plate chondrocytes. Some of these defects were also found in P4ha2(-/-) mice, although in a much milder form. Our data show that C-P4H-I can to a large extent compensate for the lack of C-P4H-II in proper endochondral bone development, but their combined partial and complete inactivation, respectively, leads to biomechanically impaired extracellular matrix, moderate chondrodysplasia, and kyphosis. Our mouse data suggest that inactivating mutations in human P4HA2 are not likely to lead to skeletal disorders, and a simultaneous decrease in P4HA1 function would most probably be required to generate such a disease phenotype.

Collagen XVI in health and disease

Collagen XVI, by structural analogy a member of the FACIT- (fibril-associated collagens with interrupted triple helices) family of collagens, is described as a minor collagen component of connective tissues. Collagen XVI is expressed in various cells and tissues without known occurrence of splice variants or isoforms. For skin and cartilage tissues its suprastructure is known. Presumably, there it acts as an adaptor protein connecting and organizing large fibrillar networks and thus modulates integrity and stability of the extracellular matrix (ECM). Collagen XVI is produced by myofibroblasts in the normal intestine and its synthesis is increased in the inflamed bowel wall where myofibroblasts develop increased numbers of focal adhesion contacts on collagen XVI. Consequently, recruitment of α1 integrin into the focal adhesions at the tip of the cells is induced followed by increased cell spreading on collagen XVI. This presumably adds to the maintenance of myofibroblasts in the inflamed intestinal regions and thus promotes fibrotic responses of the tissue. Notably, α1/α2 integrins interact with collagen XVI through an α1/α2β1 integrin binding site located in the COL 1-3 domains. Collagen XVI may act as a substrate for adhesion and invasion of connective tissue tumor cells. In glioblastoma it induces tumor invasiveness by modification of the β1-integrin activation pattern. Thus, altering the cell-matrix interaction through collagen XVI might be a molecular mechanism to further augment the invasive phenotype of glioma cells. In this line, in oral squamous cell carcinoma collagen XVI expression is induced which results in an upregulation of Kindlin-1 followed by an increased interaction with beta1-integrin. Consequently, collagen XVI induces a proliferative tumor phenotype by promoting an early S-phase entry. In summary, collagen XVI plays a decisive role in the interaction of connective tissue cells with their ECM, which is impaired in pathological situations. Alteration of tissue location and expression level of collagen XVI appears to promote tumorigenesis and to perpetuate inflammatory reactions.

Engineering of an elastic scaffolding polyprotein based on an SH3-binding intrinsically disordered titin PEVK module

Titin is a large elastic protein found in muscle that maintains the elasticity and structural integrity of the sarcomere. The PEVK region of titin is intrinsically disordered, highly elastic and serves as a hub to bind signaling proteins. Systematic investigation of the structure and affinity profile of the PEVK region will provide important information about the functions of titin. Since PEVK is highly heterogeneous due to extensive differential splicing from more than one hundred exons, we engineered and expressed polyproteins that consist of a defined number of identical single exon modules. These customized polyproteins reduce heterogeneity, amplify interactions of less dominant modules, and most importantly, provide tags for atomic force microscopy and allow more readily interpretable data from single-molecule techniques. Expression and purification of recombinant polyprotein with repeat regions presented many technical challenges: recombination events in tandem repeats of identical DNA sequences exacerbated by high GC content, toxicity of polymer plasmid and expressed protein to the bacteria; early truncation of proteins expressed with different numbers of modules; and extreme sensitivity to proteolysis. We have investigated a number of in vitro and in vivo bacterial and yeast expression systems, as well as baculoviral systems as potential solutions to these problems. We successfully expressed and purified in gram quantities a polyprotein derived from human titin exon 172 using Pichia pastoris yeast. This study provides valuable insights into the technical challenges regarding the engineering and purification of a tandem repeat sequence of an intrinsically disordered biopolymer.

APPLICATIONS OF COLLAGEN IN MEDICAL DEVICES

Collagen is the most abundant natural protein found in living systems. While there is a whole family of different collagen types, each differing in sequence, the properties that make this protein so attractive as the building blocks for medical devices, are reflected largely by the unique fibrillar structure of the molecule, as well as defined functional regions that interact with the surrounding cells and other matrix components. As a commercial medical product, collagen can be part of the natural tissue used in the device, or it can be fabricated as a reconstituted product from animal or recombinant sources. Both types of uses have distinct properties that convey advantages and disadvantages to the end product. This review examines the chemistry and biology of collagen and describes some well-documented examples of collagen-based medical devices produced in one or other of these formats.

Natural and Genetically Engineered Proteins for Tissue Engineering

To overcome the limitations of traditionally used autografts, allografts and, to a lesser extent, synthetic materials, there is the need to develop a new generation of scaffolds with adequate mechanical and structural support, control of cell attachment, migration, proliferation and differentiation and with bio-resorbable features. This suite of properties would allow the body to heal itself at the same rate as implant degradation. Genetic engineering offers a route to this level of control of biomaterial systems. The possibility of expressing biological components in nature and to modify or bioengineer them further, offers a path towards multifunctional biomaterial systems. This includes opportunities to generate new protein sequences, new self-assembling peptides or fusions of different bioactive domains or protein motifs. New protein sequences with tunable properties can be generated that can be used as new biomaterials. In this review we address some of the most frequently used proteins for tissue engineering and biomedical applications and describe the techniques most commonly used to functionalize protein-based biomaterials by combining them with bioactive molecules to enhance biological performance. We also highlight the use of genetic engineering, for protein heterologous expression and the synthesis of new protein-based biopolymers, focusing the advantages of these functionalized biopolymers when compared with their counterparts extracted directly from nature and modified by techniques such as physical adsorption or chemical modification.

Recombinant human collagen and biomimetic variants using a de novo gene optimized for modular assembly

A collagen-mimetic polymer that can be easily engineered with specific cell-responsive and mechanical properties would be of significant interest for fundamental cell-matrix studies and applications in regenerative medicine. However, oligonucleotide-based synthesis of full-length collagen has been encumbered by the characteristic glycine-X-Y sequence repetition, which promotes mismatched oligonucleotide hybridizations during de novo gene assembly. In this work, we report a novel, modular synthesis strategy that yields full-length human collagen III and specifically defined variants. We used a computational algorithm that applies codon degeneracy to design oligonucleotides that favor correct hybridizations while disrupting incorrect ones for gene synthesis. The resulting recombinant polymers were expressed in Saccharomyces cerevisiae engineered with prolyl-4-hydroxylase. Our modular approach enabled mixing-and-matching domains to fabricate different combinations of collagen variants that contained different secretion signals at the N-terminus and cysteine residues imbedded within the triple-helical domain at precisely defined locations. This work shows the flexibility of our strategy for designing and assembling specifically tailored biomimetic collagen polymers with re-engineered properties.

Production of a non-triple helical collagen alpha chain in transgenic silkworms and its evaluation as a gelatin substitute for cell culture

We generated transgenic silkworms that synthesized human type I collagen alpha1 chain [alpha1(I) chain] in the middle silk glands and secreted it into cocoons. The initial content of the recombinant alpha1(I) chain in the cocoons of the transgenic silkworms was 0.8%. The IE1 gene, a trans-activator from the baculovirus, was introduced into the transgenic silkworm to increase the content of the chain. We also generated silkworms homozygous for the transgenes. These manipulations increased the alpha1(I) chain content to 8.0% (4.24 mg per cocoon). The alpha1(I) chain was extracted and purified from the cocoons using a very simple method. The alpha1(I) chain contained no hydroxyprolines due to the absence of prolyl-hydroxylase activity in the silk glands. Circular dichroism analysis showed that the secondary structure of the alpha1(I) chain is similar to that of denatured type I collagen, demonstrating the absence of the triple helical structure. Human skin fibroblasts were seeded on the alpha1(I) chain-coated dishes. The cells attached and spread, although at decreased chain concentrations the spreading rate was lower than that of the collagen and gelatin. Cynomolgus monkey embryonic stem cells cultured on the alpha1(I) chain-coated dishes maintained an undifferentiated state after 30 passages, and their pluripotency was confirmed by teratoma formation in severe combined immunodeficient mice. These results show that the recombinant human alpha1(I) chain is a promising candidate biomaterial as a high-quality and safe gelatin substitute for cell culture.

Collagen binding specificity of the discoidin domain receptors: binding sites on collagens II and III and molecular determinants for collagen IV recognition by DDR1

The discoidin domain receptors, DDR1 and DDR2 are cell surface receptor tyrosine kinases that are activated by triple-helical collagen. While normal DDR signalling regulates fundamental cellular processes, aberrant DDR signalling is associated with several human diseases. We previously identified GVMGFO (O is hydroxyproline) as a major DDR2 binding site in collagens I–III, and located two additional DDR2 binding sites in collagen II. Here we extend these studies to the homologous DDR1 and the identification of DDR binding sites on collagen III. Using sets of overlapping triple-helical peptides, the Collagen II and Collagen III Toolkits, we located several DDR2 binding sites on both collagens. The interaction of DDR1 with Toolkit peptides was more restricted, with DDR1 mainly binding to peptides containing the GVMGFO motif. Triple-helical peptides containing the GVMGFO motif induced DDR1 transmembrane signalling, and DDR1 binding and receptor activation occurred with the same amino acid requirements as previously defined for DDR2. While both DDRs exhibit the same specificity for binding the GVMGFO motif, which is present only in fibrillar collagens, the two receptors display distinct preferences for certain non-fibrillar collagens, with the basement membrane collagen IV being exclusively recognised by DDR1. Based on our recent crystal structure of a DDR2-collagen complex, we designed mutations to identify the molecular determinants for DDR1 binding to collagen IV. By replacing five amino acids in DDR2 with the corresponding DDR1 residues we were able to create a DDR2 construct that could function as a collagen IV receptor.

The collagen V homotrimer [alpha1(V)](3) production is unexpectedly favored over the heterotrimer [alpha1(V)](2)alpha2(V) in recombinant expression systems

Collagen V, a fibrillar collagen with important functions in tissues, assembles into distinct chain associations. The most abundant and ubiquitous molecular form is the heterotrimer [α1(V)]₂α2(V). In the attempt to produce high levels of recombinant collagen V heterotrimer for biomedical device uses, and to identify key factors that drive heterotrimeric chain association, several cell expression systems (yeast, insect, and mammalian cells) have been assayed by cotransfecting the human proα1(V) and proα2(V) chain cDNAs. Suprisingly, in all recombinant expression systems, the formation of [α1(V)]₃ homotrimers was considerably favored over the heterotrimer. In addition, pepsin-sensitive proα2(V) chains were found in HEK-293 cell media indicating that these cells lack quality control proteins preventing collagen monomer secretion. Additional transfection with Hsp47 cDNA, encoding the collagen-specific chaperone Hsp47, did not increase heterotrimer production. Double immunofluorescence with antibodies against collagen V α-chains showed that, contrary to fibroblasts, collagen V α-chains did not colocalized intracellularly in transfected cells. Monensin treatment had no effect on the heterotrimer production. The heterotrimer production seems to require specific machinery proteins, which are not endogenously expressed in the expression systems. The different constructs and transfected cells we have generated represent useful tools to further investigate the mechanisms of collagen trimer assembly.

Sandwich ELISA for quantitative detection of human collagen prolyl 4-hydroxylase

Background

We describe a method for specific, quantitative and quick detection of human collagen prolyl 4-hydroxylase (C-P4H), the key enzyme for collagen prolyl-4 hydroxylation, in crude samples based on a sandwich ELISA principle. The method is relevant to active C-P4H level monitoring during recombinant C-P4H and collagen production in different expression systems. The assay proves to be specific for the active C-P4H α₂β₂ tetramer due to the use of antibodies against its both subunits. Thus in keeping with the method C-P4H is captured by coupled to an anti-α subunit antibody magnetic beads and an anti-β subunit antibody binds to the PDI/β subunit of the protein. Then the following holoenzyme detection is accomplished by a goat anti-rabbit IgG labeled with alkaline phosphatase which AP catalyzes the reaction of a substrate transformation with fluorescent signal generation.

Results

We applied an experimental design approach for the optimization of the antibody concentrations used in the sandwich ELISA. The assay sensitivity was 0.1 ng of C-P4H. The method was utilized for the analysis of C-P4H accumulation in crude cell extracts of E. coli overexpressing C-P4H. The sandwich ELISA signals obtained demonstrated a very good correlation with the detected protein activity levels measured with the standard radioactive assay. The developed assay was applied to optimize C-P4H production in E. coli Origami in a system where the C-P4H subunits expression acted under control by different promoters. The experiments performed in a shake flask fed-batch system (EnBase^®) verified earlier observations that cell density and oxygen supply are critical factors for the use of the inducer anhydrotetracycline and thus for the soluble C-P4H yield.

Conclusions

Here we show an example of sandwich ELISA usage for quantifying multimeric proteins. The method was developed for monitoring the amount of recombinant C-P4H tetramer in crude E. coli extracts. Due to the specificity of the antibodies used in the assay against the different C-P4H subunits, the method detects the entire holoenzyme, and the signal is not disturbed by background expression of the separate subunits.

Collagens as biomaterials

This paper reviews the structure, function and applications of collagens as biomaterials. The various formats for collagens, either as tissue-based devices or as reconstituted soluble collagens are discussed. The major emphasis is on the new technologies that are emerging that will lead to new and improved collagen-based medical devices. In particular, the development of recombinant collagens, especially using microorganism systems, is allowing the development of safe and reproducible collagen products. These systems also allow for the development of novel, non-natural structures, for example collagen like structures containing repeats of key functional domains or as chimeric structures where a collagen domain is covalently linked to another biologically active component.

Stringency of the 2-His-1-Asp active-site motif in prolyl 4-hydroxylase

The non-heme iron(II) dioxygenase family of enzymes contain a common 2-His-1-carboxylate iron-binding motif. These enzymes catalyze a wide variety of oxidative reactions, such as the hydroxylation of aliphatic C-H bonds. Prolyl 4-hydroxylase (P4H) is an alpha-ketoglutarate-dependent iron(II) dioxygenase that catalyzes the post-translational hydroxylation of proline residues in protocollagen strands, stabilizing the ensuing triple helix. Human P4H residues His412, Asp414, and His483 have been identified as an iron-coordinating 2-His-1-carboxylate motif. Enzymes that catalyze oxidative halogenation do so by a mechanism similar to that of P4H. These halogenases retain the active-site histidine residues, but the carboxylate ligand is replaced with a halide ion. We replaced Asp414 of P4H with alanine (to mimic the active site of a halogenase) and with glycine. These substitutions do not, however, convert P4H into a halogenase. Moreover, the hydroxylase activity of D414A P4H cannot be rescued with small molecules. In addition, rearranging the two His and one Asp residues in the active site eliminates hydroxylase activity. Our results demonstrate a high stringency for the iron-binding residues in the P4H active site. We conclude that P4H, which catalyzes an especially demanding chemical transformation, is recalcitrant to change.

Recombinant collagen trimers from insect cells and yeast

At least 28 proteins have now been defined as collagens (Trends Genet. 20:33-43, 2004; J. Biol. Chem. 281:3494-3504, 2006), but many of those recently discovered are present in tissues in such small amounts that their isolation for characterization at the protein level has so far been impossible. Some of the fibrilforming collagens are used as a biomaterial in numerous medical applications and as a delivery system for various drugs (3, 4). The collagens used in all these applications have been isolated from animal tissues and are liable to cause allergic reactions in some subjects and carry a risk of disease-causing contaminants (3,4). An efficient recombinant expression system for collagens can thus be expected to have numerous scientific and medical applications. The systems commonly used for expressing other proteins in lower organisms are not suitable as such for the production of recombinant collagens, however, as bacteria and yeast have no prolyl 4-hydroxylase activity and insect cells have insufficient levels of it. Prolyl 4-hydroxylase, an alpha 2 beta 2 tetramer in vertebrates, plays a central role in the synthesis of all collagens, as 4-hydroxyproline-deficient collagen polypeptide chains cannot form triple helices that are stable at 37 degrees C (5,6). All attempts to assemble an active prolyl 4-hydroxylase tetramer from its subunits in vitro have been unsuccessful, but active recombinant human prolyl 4-hydroxylase has been produced in insect cells, yeast, and Escherichia coli by coexpression of its alpha - and beta -subunits (7-9).

Ex vivo conditions for self-replication of human hepatic stem cells

Human hepatic stem cells (hHpSCs), identifiable by a unique antigenic profile, have been isolated from human livers and established ex vivo under expansion conditions permissive for self-replication. The conditions consist of a substratum of type III collagen, ideally on Transwell inserts, and Kubota's medium, a serum-free medium developed for hepatic progenitors. Under these conditions the cells demonstrated a doubling time of approximately 24 h, generating at least a 16-fold increase in cell number within 7-10 days; were stable at confluence for up to 2 weeks; could be passaged, if on type III collagen, to initiate colonies that went through log-phase growth and saturation density kinetics; and expressed telomerase, indicative of regenerative capacity. The hHpSC colonies remained morphologically and phenotypically stable throughout expressing epithelial cell adhesion molecule, neural cell adhesion molecule, albumin, cytokeratins 8, 18, and 19, but not alpha-fetoprotein, or intercellular adhesion molecule-1 (ICAM-1). Those maintained under self-replication conditions for more than a month were transplanted and found to engraft in the livers of SCID/nod mice yielding human liver tissue expressing adult liver-specific proteins. The conditions for self-replication should offer ideal culture conditions for generating large numbers of hHpSCs for use in commercial and clinical programs.

Prolyl 4-hydroxylases, key enzymes in the synthesis of collagens and regulation of the response to hypoxia, and their roles as treatment targets

Prolyl 4-hydroxylases (P4Hs) have central roles in the synthesis of collagens and the regulation of oxygen homeostasis. The 4-hydroxyproline residues generated by the endoplasmic reticulum (ER) luminal collagen P4Hs (C-P4Hs) are essential for the stability of the collagen triple helix. Vertebrate C-P4Hs are alpha2beta2 tetramers with three isoenzymes differing in their catalytic alpha subunits. Another P4H family, the HIF-P4Hs, hydroxylates specific prolines in the alpha subunit of the hypoxia-inducible transcription factor (HIF), a master regulator of hypoxia-inducible genes, and controls its stability in an oxygen-dependent manner. The HIF-P4Hs are cytoplasmic and nuclear enzymes, likewise with three isoenzymes in vertebrates. A third vertebrate P4H type is an ER transmembrane protein that can act on HIF-alpha but not on collagens. All P4Hs require Fe2+, 2-oxoglutarate, O2, and ascorbate. C-P4Hs are regarded as attractive targets for pharmacological inhibition to control excessive collagen accumulation in fibrotic diseases and severe scarring, while HIF-P4H inhibitors are believed to have beneficial effects in the treatment of diseases such as myocardial infarction, stroke, peripheral vascular disease, diabetes, and severe anemias. Studies with P4H inhibitors in various animal models of fibrosis, anemia, and ischemia and ongoing clinical trials with HIF-P4H inhibitors support this hypothesis by demonstrating efficacy in many applications.

The Role of Disulfide Bonds and α-Helical Coiled-coils in the Biosynthesis of Type XIII Collagen and Other Collagenous Transmembrane Proteins

Type XIII collagen is a type II transmembrane protein with three collagenous (COL1-3) and four noncollagenous domains (NC1-4). The human alpha1(XIII) chain contains altogether eight cysteine residues. We introduced point mutations to six of the most N-terminal cysteine residues, and we show here that the two cysteines 117 and 119 at the end of the N-terminal noncollagenous domain (NC1) are responsible for linking the three alpha1(XIII) chains together by means of interchain disulfide bonds. In addition, the intracellular and transmembrane domains have an impact on trimer formation, whereas the cysteines in the transmembrane domain and the COL1, the NC2, and the C-terminal NC4 domains do not affect trimer formation. We also suggest that the first three noncollagenous domains (NC1-3) harbor repeating heptad sequences typical of alpha-helical coiled-coils, whereas the conserved NC4 lacks a coiled-coil probability. Prevention of the coiled-coil conformation in the NC3 domain is shown here to result in labile type XIII collagen molecules. Furthermore, a new subgroup of collagenous transmembrane proteins, the Rattus norvegicus, Drosophila melanogaster, and Caenorhabditis elegans colmedins, is enlarged to contain also Homo sapiens collomin, and Pan troglodytes, Mus musculus, Tetraodon nigroviridis, and Dano rerio proteins. We suggest that there is a structurally varied group of collagenous transmembrane proteins whose biosynthesis is characterized by a coiled-coil motif following the transmembrane domain, and that these trimerization domains appear to be associated with each of the collagenous domains. In the case of type XIII collagen, the trimeric molecule has disulfide bonds at the junction of the NC1 and COL1 domains, and the type XIII collagen-like molecules (collagen types XXIII and XXV) and the colmedins are similar in that they all have a pair of cysteines in the same location. Moreover, furin cleavage at the NC1 domain can be expected in most of the proteins.

Thermally Associating Polypeptides Designed for Drug Delivery Produced by Genetically Engineered Cells

Thermally associating polymers, including gelatin, cellulose ethers (e.g., Methocels and poloxamers (e.g., Pluronics) have a long history of use in pharmacy. Over the past 20 years, significant advances in genetic engineering and the understanding of protein secondary and tertiary structures have been made. This has led to the development of a variety of polypeptides that do not occur naturally but can be expressed in recombinant cells and have useful properties that lend themselves to novel applications where current materials cannot perform. The most intensively studied motifs are derived from the consensus repeats of elastin and silk, as well as coiled-coil helices. Many of these designed polypeptides or 'artificial proteins' are thermally associating materials. This property can be exploited to develop solid dosage forms, injectable drug delivery systems, micro- or nanoparticle drug carriers, triggered or targeted release systems, or as a means of simplifying the purification process and thus reducing costs of production of these materials. This review focuses on the development and characterization of this novel class of biomaterials and examines their potential for pharmaceutical applications.

Characterization of a human surfactant protein A1 (SP-A1) gene-specific antibody; SP-A1 content variation among individuals of varying age and pulmonary health

The human surfactant protein A (SP-A) locus consists of two functional genes (SP-A1, SP-A2) with gene-specific products exhibiting qualitative and quantitative differences. The aim here was twofold: 1) generate SP-A1 gene-specific antibody, and 2) use this to assess gene-specific SP-A content in the bronchoalveolar lavage fluid (BALF). An SP-A1-specific polyclonal antibody (hSP-A1_Ab(68-88)_Col) was raised in chicken, and its specificity was determined by immunoblot and ELISA using mammalian Chinese hamster ovary (CHO) cell-expressed SP-A1 and SP-A2 variants and by immunofluorescence with stably transfected CHO cell lines expressing SP-A1 or SP-A2 variants. SP-A1 content was evaluated according to age and lung status. A gradual decrease (P < 0.05) in SP-A1/SP-A ratio was observed in healthy subjects (HS) with increased age, although no significant change was observed in total SP-A content among age groups. Total SP-A and SP-A1 content differed significantly between alveolar proteinosis (AP) patients and HS, with no significant difference observed in SP-A1/SP-A ratio between AP and HS. The cystic fibrosis (CF) ratio was significantly higher compared with AP, HS, and noncystic fibrosis (NCF), even though SP-A1 and total SP-A were decreased in CF compared with most of the other groups. The ratio was higher in culture-positive vs. culture-negative samples from CF and NCF (P = 0.031). A trend of an increased ratio was observed in culture-positive CF (0.590 +/- 0.10) compared with culture-positive NCF (0.368 +/- 0.085). In summary, we developed and characterized an SP-A1 gene-specific antibody and used it to identify gene-specific SP-A content in BALFs as a function of age and lung health.

Selective expression of nonsecreted triple-helical and secreted single-chain recombinant collagen fragments in the yeast Pichia pastoris

High-level recombinant expression systems for the production of stable triple-helical human collagens and collagen fragments have been developed in the yeast Pichia pastoris. Collagen fragments are secreted as single-chain polypeptides by the yeast alpha-mating factor pre-pro sequence, but secretion of full-length triple-helical procollagen molecules has not been achieved despite the use of the same secretory signal. We studied here the effects of the secretory signal and the conformation and size of the collagen polypeptide on its secretion in P. pastoris. Unlike the collagen signal sequence, the alpha-mating factor pre-pro sequence led to efficient secretion of single-chain 45 and 9 kDa type I collagen fragments. The efficiency was dependent on the length of the collagen polypeptide, as secretion of single-chain full-length 90 kDa alpha1(I) polypeptides was less efficient than that of the 45 kDa fragment. Furthermore, the conformation of the collagen polypeptides had a marked effect on secretion, as induction of trimerization of the 45 and 9 kDa fragments by either the C propeptide or the small trimerizing domain foldon led to an accumulation of triple-helical molecules inside the cells despite the presence of the alpha-mating factor pre-pro sequence. Our results show that P. pastoris is a suitable host for the development of tailored expression systems aimed at selective production of nonsecreted triple-helical and secreted single-chain collagen fragments of varying lengths for specific purposes.

Production of pediocin PA-1 in the methylotrophic yeast Pichia pastoris reveals unexpected inhibition of its biological activity due to the presence of collagen-like material

Expression of the pedA gene from Pediococcus acidilactici, coding for mature bacteriocin Pediocin PA-1, was investigated using the yeast Pichia pastoris to obtain larger quantities of pediocin to support additional studies, including structure-function research. Following various cloning strategies, a KM71H (Mut(s)) strain was selected. A significant concentration (74 microg/ml) of extracellular recombinant pediocin was obtained but the pediocin showed no biological activity. Supernatant fluids from P. pastoris cultures, harboring or not pedA, inhibited the biological activity of natural pediocin PA-1. The recombinant pediocin appeared as a mixture of three main fractions (7-8, 11, 20 kDa vs. 4.6 kDa for natural pediocin PA-1). The recombinant pediocin was also less hydrophobic and behaved differently when subjected to isoelectric focusing. Strong evidence indicated that some "collagen-like" material was tightly associated, most probably via covalent binding, to the recombinant pediocin. The "collagen-like" material was most probably responsible for the lack of biological activity of the recombinant pediocin and for the differences observed regarding some of the physico-chemical properties. Both the recombinant pediocin and natural pediocin were sensitive to collagenase, suggesting that pediocin PA-1 may possess a somewhat "collagen-like" nature. Interestingly, recombinant pediocin preparations showed the ability to assemble into fibrils.

Recombinant microbial systems for the production of human collagen and gelatin

The use of genetically engineered microorganisms is a cost-effective, scalable technology for the production of recombinant human collagen (rhC) and recombinant gelatin (rG). This review will discuss the use of yeast (Pichia pastoris, Saccharomyces cerevisiae, Hansenula polymorpha) and of bacteria (Escherichia coli, Bacillus brevis) genetically engineered for the production of rhC and rG. P. pastoris is the preferred production system for rhC and rG. Recombinant strains of P. pastoris accumulate properly hydroxylated triple helical rhC intracellularly at levels up to 1.5 g/l. Coexpression of recombinant collagen with recombinant prolyl hydroxylase results in the synthesis of hydroxylated collagen with thermal stability similar to native collagens. The purified hydroxylated rhC forms fibrils that are structurally similar to fibrils assembled from native collagen. These qualities make rhC attractive for use in many medical applications. P. pastoris can also be engineered to secrete high levels (3 to 14 g/l ) of collagen fragments with defined length, composition, and physiochemical properties that serve as substitutes for animal-derived gelatins. The replacement of animal-derived collagen and gelatin with rhC and rG will result in products with improved safety, traceability, reproducibility, and quality. In addition, the rhC and rG can be engineered to improve the performance of products containing these biomaterials.

Assembly of homotrimeric type XXI minicollagen by coexpression of prolyl 4-hydroxylase in stably transfected Drosophila melanogaster S2 cells

We established stably transfected insect cell lines containing cDNAs encoding the alpha and beta subunits of human prolyl 4-hydroxylase in both Trichoplusia ni and Drosophila melanogaster S2 cells. The expression level and enzymatic activity of recombinant prolyl 4-hydroxylase produced in the Drosophila expression system were significantly higher than those produced in the T. ni system. We further characterized the involvement of prolyl 4-hydroxylase in the assembly of the three alpha chains to form trimeric type XXI minicollagen, which comprises the intact C-terminal non-collagenous (NC1) and collagenous domain (COL1), in the Drosophila system. When minicollagen XXI was stably expressed in Drosophila S2 cells alone, negligible amounts of interchain disulfide-bonded trimers were detected in the culture media. However, minicollagen XXI was secreted as disulfide-bonded homotrimers by coexpression with prolyl 4-hydroxylase in the stably transfected Drosophila S2 cells. Minicollagen XXI coexpressed with prolyl 4-hydroxylase contained sufficient amounts of hydroxyproline to form thermal stable pepsin-resistant triple helices consisting of both interchain and non-interchain disulfide-bonded trimers. These results demonstrate that a sufficient amount of active prolyl 4-hydroxylase is required for the assembly of type XXI collagen triple helices in Drosophila cells and the trimeric assembly is governed by the C-terminal collagenous domain.

Triple helical collagen-like peptides: engineering and applications in matrix biology

Collagen, a large insoluble protein with a characteristic triple helical structure, is found as the most prominent component of extracellular matrix. The functions of collagen are not limited to providing mechanical strength to various tissues and organs as a structural protein, as it has been pointed out that collagen exhibits various biological functions through specific interactions with other macromolecules. However, the use of native triple helical collagen is often troublesome because of its insolubility and gelating properties. Instead, triple helical collagen-like peptides have been designed and are used as collagen surrogates in studies on collagen structure, stability, and biological functions including binding to other proteins and cultured cells. This article reviews recent progress in peptide design, synthesis, and the applications of collagen-like peptides in current matrix biology, while emphasizing the advantages of the peptide-based strategy.

Characterization of a second Arabidopsis thaliana prolyl 4-hydroxylase with distinct substrate specificity

4-Hydroxyproline is found in collagens, collagen-like proteins, elastin, and the hypoxia-inducible transcription factor in animals and in many hydroxyproline-rich glycoproteins in plants. We report here on the cloning and characterization of a second plant P4H (prolyl 4-hydroxylase), At-P4H-2, from Arabidopsis thaliana. It consists of 299 amino acids and shows 33% sequence identity to the first characterized isoenzyme, At-P4H-1. A characteristic feature of the At-P4H-2 polypeptide is a 49-amino-acid C-terminal toxin homology domain with 6 cysteines that is not found in At-P4H-1 but is present in a putative rice P4H homologue. At-P4H-2 differed distinctly from At-P4H-1 in its substrate specificity. Recombinant At-P4H-2 hydroxylated poly(L-proline) and extensin and arabinogalactan-like peptides effectively but with much higher Km values than At-P4H-1, suggesting different roles for the two At-P4Hs in the plant cell. Unlike At-P4H-1, At-P4H-2 hydroxylated collagen-like peptides only very inefficiently and did not hydroxylate hypoxia-inducible transcription factor alpha-like peptides at all. All the peptides efficiently hydroxylated by At-P4H-2 had at least 3 consecutive prolines, suggesting that these may represent a minimum requirement for efficient hydroxylation by this isoenzyme. N-terminal sequencing of an extensin-like peptide SPPPVYKSPPPPVKHYSPPPV indicated that At-P4H-2 preferentially hydroxylated the 3rd proline in the C-terminal PPP triplet. The Km values of At-P4H-2 for the reaction cosubstrates Fe2+, 2-oxoglutarate, and ascorbate were similar to those of At-P4H-1 with the exception that the Km for iron was about 3-fold lower. Pyridine-2,4-dicarboxylate and pyridine-2,5-dicarboxylate, well known competitive inhibitors of the vertebrate P4Hs with respect to 2-oxoglutarate, were also competitive inhibitors of At-P4H-2 but with Ki values 5-100-fold higher than those of human type I collagen P4H. It thus seems that there are some distinct differences in the structure of the 2-oxoglutarate-binding site between At-P4H-2 and the animal collagen P4Hs.

Characterization of the Alzheimer's disease-associated CLAC protein and identification of an amyloid beta-peptide-binding site

Amyloid beta-peptide (Abeta) deposition into amyloid plaques is one of the invariant neuropathological features of Alzheimer's disease. Other proteins co-deposit with Abeta in plaques, and one recently identified amyloid-associated protein is the collagen-like Alzheimer amyloid plaque component CLAC. It is not known how CLAC deposition affects Abeta plaque genesis and the progress of the disease. Here, we studied the in vitro properties of CLAC purified from a mammalian expression system. CLAC displays features characteristic of a collagen protein, e.g. it forms a partly protease-resistant triple-helical structure, exhibits an intermediate affinity for heparin, and is glycosylated. Purified CLAC was also used to investigate the interaction between CLAC and Abeta. Using a solid-phase binding assay, we show that CLAC bound with a similar affinity to aggregates formed by Abeta-(1-40) and Abeta-(1-42) and that the interaction was impaired by increasing salt concentrations. An 8-residue-long sequence located in non-collagenous domain 2 of CLAC was found to be crucial for the interaction with Abeta. These findings may be useful for future therapeutic interventions aimed at finding compounds that modulate the binding of CLAC to Abeta deposits.

Molecular Structure and Interaction of Recombinant Human Type XVI Collagen

Collagen XVI is a minor component of at least two different extracellular fibrillar networks of specialized regions of skin and cartilage. In skin, collagen XVI is integrated into particular fibrillin-rich microfibrils lacking an amorphous elastin core. In cartilage, collagen XVI is a component of small heterotypic D-banded fibrils, mainly occurring in the territorial matrix of chondrocytes. Here, we present the first direct evidence for the molecular structure and functional properties of these fibril-associated collagens with interrupted triple helices (FACIT). We have expressed recombinantly the full-length alpha1 chain of human collagen XVI in HEK 293 EBNA cells in large quantities using an episomal expression system. Secreted full-length recombinant collagen XVI forms stable disulfide-bonded homotrimers and is rapidly proteolytically processed to distinct fragments at specific protease sequence motifs, one resembling an aggrecanase recognition site. Limited trypsin digestion assays and thermal transition curves imply sequential thermal denaturation of individual triple helical domains of this recombinant collagen, similar to authentic collagen XVI. Molecular images of collagen XVI reveal rod-like molecules which harbor multiple sharp kinks attributing a highly flexible structure presumably introduced by non-collagenous (NC) regions. Terminally located cloverleaf-shaped nodules correspond to the large NC NC11 domain of trimeric collagen XVI. The total length of individual trimeric recombinant collagen XVI molecules constitutes about 240 nm as calculated by atomic force and negative staining electron microscopy. Recombinant collagen XVI interacts with fibrillin-1 and with fibronectin indicating multiple molecular interactions in which this ubiquitously expressed and versatile FACIT-collagen can participate. In vitro generated collagen XVI provides an indispensable tool for future determination of its function during supramolecular assembly of matrix aggregates and its role in maintenance, organization and interaction of fibrillar structures.

Enzymes involved in the biogenesis of the nematode cuticle

Nematodes include species that are significant parasites of man, his domestic animals and crops, and cause chronic debilitating diseases in the developing world; such as lymphatic filariasis and river blindness caused by filarial species. Around one third of the World's population harbour parasitic nematodes; no vaccines exist for prevention of infection, limited effective drugs are available and drug resistance is an ever-increasing problem. A critical structure of the nematode is the protective cuticle, a collagen-rich extracellular matrix (ECM) that forms the exoskeleton, and is critical for viability. This resilient structure is synthesized sequentially five times during nematode development and offers protection from the environment, including the hosts' immune response. The detailed characterization of this complex structure; it's components, and the means by which they are synthesized, modified, processed and assembled will identify targets that may be exploited in the future control of parasitic nematodes. This review will focus on the nematode cuticle. This structure is predominantly composed of collagens, a class of proteins that are modified by a range of co- and post-translational modifications prior to assembly into higher order complexes or ECMs. The collagens and their associated enzymes have been comprehensively characterized in vertebrate systems and some of these studies will be addressed in this review. Conversely, the biosynthesis of this class of essential structural proteins has not been studied in such detail in the nematodes. As with all morphogenetic, functional and developmental studies in the Nematoda phylum, the free-living species Caenorhabditis elegans has proven to be invaluable in the characterization of the cuticle and the cuticle collagen gene family, and is now proving to be an excellent model in the study of cuticle collagen biosynthetic enzymes. This model system will be the main focus of this review.

Type XIII collagen and some other transmembrane collagens contain two separate coiled-coil motifs, which may function as independent oligomerization domains

Type XIII collagen is a homotrimeric transmembrane collagen composed of a short intracellular domain, a single membrane-spanning region, and an extracellular ectodomain with three collagenous domains (COL1-3) separated by short non-collagenous domains (NC1-4). Several collagenous transmembrane proteins have been found to harbor a conserved sequence next to their membrane-spanning regions, and in the case of type XIII collagen this sequence has been demonstrated to be important for chain association. We show here that this 21-residue sequence is necessary but not sufficient for NC1 association. Furthermore, the NC1 association region was predicted to form an alpha-helical coiled-coil structure, which may already begin at the membrane-spanning region, as is also predicted for the related collagen types XXIII and XXV. Interestingly, a second coiled-coil structure is predicted to be located in the NC3 domain of type XIII collagen and in the corresponding domains of types XXIII and XXV. It is found experimentally that the absence of the NC1 coiled-coil domain leads to a lack of disulfide-bonded trimers and misfolding of the membrane-proximal collagenous domain COL1, whereas the COL2 and COL3 domains are correctly folded. We suggest that the NC1 coiled-coil domain is important for association of the N-terminal part of the type XIII collagen alpha chains, whereas the NC3 coiled-coil domain is implicated in the association of the C-terminal part of the molecule. All in all, we propose that two widely separated coiled-coil domains of type XIII and related collagens function as independent oligomerization domains participating in the folding of distinct areas of the molecule.

Assembly of stable human type I and III collagen molecules from hydroxylated recombinant chains in the yeast Pichia pastoris. Effect of an engineered C-terminal oligomerization domain foldon

The C-propeptides of the pro alpha chains of type I and type III procollagens are believed to be essential for correct chain recognition and chain assembly in these molecules. We studied here whether the 30-kDa C-propeptides of the human pC alpha 1(I), pC alpha 2(I), and pC alpha 1(III) chains, i.e. pro alpha chains lacking their N-propeptides, can be replaced by foldon, a 29-amino acid sequence normally located at the C terminus of the polypeptide chains in the bacteriophage T4 fibritin. The alpha foldon chains were expressed in Pichia pastoris cells that also expressed the two types of subunit of human prolyl 4-hydroxylase; the foldon domain was subsequently removed by pepsin treatment, which also digests non-triple helical collagen chains, whereas triple helical collagen molecules are resistant to it. The foldon domain was found to be very effective in chain assembly, as expression of the alpha 1(I)foldon or alpha 1(III)foldon chains gave about 2.5-3-fold the amount of pepsin-resistant type I or type III collagen homotrimers relative to those obtained using the authentic C-propeptides. In contrast, expression of chains with no oligomerization domain led to very low levels of pepsin-resistant molecules. Expression of alpha 2(I)foldon chains gave no pepsin-resistant molecules at all, indicating that in addition to control at the level of the C-propeptide other restrictions at the level of the collagen domain exist that prevent the formation of stable [alpha 2(I)]3 molecules. Co-expression of alpha 1(I)foldon and alpha 2(I)foldon chains led to an efficient assembly of heterotrimeric molecules, their amounts being about 2-fold those obtained with the authentic C-propeptides and the alpha 1(I) to alpha 2(I) ratio being 1.91 +/- 0.31 (S.D.). As the foldon sequence contains no information for chain recognition, our data indicate that chain assembly is influenced not only by the C-terminal oligomerization domain but also by determinants present in the alpha chain domains.

Effect of hydroxylation and N187-linked glycosylation on molecular and functional properties of recombinant human surfactant protein A

The objective of this study was to determine the effects of proline hydroxylation in the collagen-like domain and Asn(187)-linked glycosylation in the globular domain on the molecular and functional properties of human surfactant protein A1 (SP-A1). To address this issue, SP-A1 was in vitro expressed in insect and mammalian cells. Insect cells lack prolyl 4-hydroxylase activity. A glycosylation-deficient mutant SP-A1 was expressed in insect cells. In this report we present evidence that hydroxylation increased the T(m) of the collagen-like domain by 9 degrees C. Proline hydroxylation affected both the arrangement of disulfide bonding and the extent of oligomerization but did not affect conformational changes in the globular domain identified by intrinsic fluorescence. Both self-association and lipid-related functions of SP-A were clearly correlated with the thermal stability of the collagen domain and the degree of oligomerization. Structural properties and lipid-related characteristics of SP-A1 expressed in mammalian cells but not in insect cells were close to that of natural human SP-A. On the other hand, the lack of glycosylation did not affect either collagen domain stability or conformational changes induced by calcium in the globular domain. However, the lack of glycosylation favored nonspecific thermally induced aggregation of the protein.