Recent development of advanced biotechnology for wastewater treatment

Transport and risk of airborne pathogenic microorganisms in the process of decentralized sewage discharge and treatment

Sewage treatment processes are a critical anthropogenic source of bioaerosols and may present significant health risks to plant workers. Compared with the specialization and scale of urban sewage treatment, many decentralized treatment models are flexible and extensive. These treatment facilities are usually close to residential areas owing to the pipe network layout and other restrictions. Bioaerosols generated by these facilities may present a serious and widespread occupational and non-occupational exposure risk to nearby residents, particularly the elderly and children. An understanding of the characteristics and exposure risks of bioaerosols produced during decentralized sewage treatment is lacking. We compared bioaerosol emission characteristics and potential exposure risks under four decentralized sewage discharge methods and treatment models: small container collection (SCC), open-channel discharge (OCD), single household/combined treatment (SHCT), and centralized treatment (CT) in northwest China. The OCD mode had the highest bioaerosol production, whereas the CT mode had the lowest. The OCD model contained the most pathogenic bacterial species, up to 43 species, including Sphingomonas, Pseudomonas, Cladosporium, and Alternaria. Risk assessments indicated bioaerosol exposure was lower in the models with sewage treatment (SHCT and CT) than in those without (SCC and OCD). Different populations exhibited large variations in potential risks owing to differences in time spent indoors and outdoors. The highest risk was observed in males exposed to the SCC model. This study provides a theoretical basis and theories for the future joint prevention and control of the bioaerosol exposure risk from decentralized sewage treatment.

Sustainable management of tea wastes: resource recovery and conversion techniques

As the demand for tea (Camellia sinensis) has grown across the world, the amount of biomass waste that has been produced during the harvesting process has also increased. Tea consumption was estimated at about 6.3 million tonnes in 2020 and is anticipated to reach 7.4 million tonnes by 2025. The generation of tea waste (TW) after use has also increased concurrently with rising tea consumption. TW includes clipped stems, wasted tea leaves, and buds. Many TW-derived products have proven benefits in various applications, including energy generation, energy storage, wastewater treatment, and pharmaceuticals. TW is widely used in environmental and energy-related applications. Energy recovery from low- and medium-calorific value fuels may be accomplished in a highly efficient manner using pyrolysis, anaerobic digestion, and gasification. TW-made biochar and activated carbon are also promising adsorbents for use in environmental applications. Another area where TW shows promise is in the synthesis of phytochemicals. This review offers an overview of the conversion procedures for TW into value-added products. Further, the improvements in their applications for energy generation, energy storage, removal of different contaminants, and extraction of phytochemicals have been reviewed. A comprehensive assessment of the sustainable use of TWs as environmentally acceptable renewable resources is compiled in this review.

Advanced oxidation process (AOP) combined biological process for wastewater treatment: A review on advancements, feasibility and practicability of combined techniques

Complexity of wastewater is the most challenging phenomenon on successful degradation of pollutant via any wastewater treatment regime. Upon availability of numerous techniques, Advanced Oxidation Processes (AOP) is the most promising technique for treating industrial wastewater. Higher operating cost is the most promising factor that possess challenge for the industrial scale usage of the AOP process. Combination of biological process with AOP helps in achieving sustainable degradation of toxic pollutant in the wastewater. AOP result in complete or partial degradation of toxic emerging pollutants with the help of free radicals like hydroxyl, superoxide, hydroperoxyl and sulphate radicals. In addition to this the presence of bio-enzymes and microorganisms helps in sustainable degradation of pollutant in an economical and environmentally friendly strategy. In this review, a detailed discussion was conducted on various AOP, focusing on catalytic ozonation, electrochemical oxidation, Sono chemical and photocatalytic processes. With the need for sustainable solutions for wastewater treatment, the use of AOP in conjunction with biological process has innumerous opportunities for not only wastewater treatment but also the production of high value by-products. Further, the effect of AOP combined biological processes needs to be analyzed in real time for the different concentration of industrial wastewater and their benefits needs to be explored in future towards achieving SDGs.

Sulfonated polyhedral oligomeric silsesquioxane-cyclodextrin hybrid polymers for efficient removal of micropollutants from water

Herein, β-cyclodextrin-containing hybrid polymers (P1, P2 and P3) were prepared through crosslinking partially benzylated β-cyclodextrin (PBCD) by octavinylsilsesquioxane (OVS). P1 stood out in screening studies and the residual hydroxyl groups of PBCD was sulfonate-functionalized. The obtained P1-SO₃Na showed greatly enhanced adsorption towards cationic MPs and maintained the excellent adsorption performance towards neutral MPs. The rate constants (k₂) of cationic MPs upon P1-SO₃Na were 9.8-34.8 times larger than those upon P1. The equilibrium uptakes of the neutral and cationic MPs upon P1-SO₃Na were above 94.5 %. Meanwhile, P1-SO₃Na demonstrated appreciable adsorption capacities, excellent selectivity, effective adsorption of mixed MPs at environmental levels and good reusability. These results confirmed the great potential of P1-SO₃Na as effective adsorbent to remove MPs from water.

Rapid start-up and long-term stable operation of the anammox reactor based on biofilm process: Status, challenges, and perspectives

Anammox-biofilm processes have great potential for wastewater nitrogen removal, as it overcomes the slow growth and easy loss of AnAOB (anaerobic ammonium oxidation bacteria). Biofilm carrier is the core part of the Anammox-biofilm reactor and plays a key role in the start-up and long-term operation of the process. Therefore, the research on the biofilm carrier of Anammox-based process was summarized and discussed in terms of configurations and types. In the Anammox-biofilm process, fixed bed biofilm reactor is a relatively mature biofilm carrier configuration and has advantages in terms of nitrogen removal and long-term operational stability, while moving bed biofilm reactor has advantages in terms of start-up time. Although the long-term operational stability of fluidized bed biofilm reactor is good, its nitrogen removal performance needs to be improved. Among the different biofilm carrier categories, the inorganic biofilm carrier has an advantage in start-up time, due to the enhancement of the growth and metabolic of AnAOB by inorganic materials (such as carbon and iron). Anammox-based reactors using organic biofilm carriers, especially suspension carriers, are well-established and more stable in long-term operation. Composite biofilm carriers combine the advantages of several materials, but their complex preparation procedures lead to high costs. In addition, possible research directions for accelerating the start-up and keeping the long-term stable operation of Anammox reactor by biofilm process were highlighted. It is hoped to provide a possible pathway for the rapid start-up of Anammox-based process, and references for the optimization and promotion of process.

The Use of Chitosan for Flocculation Recovery of Bacillus Biomass Grown on Dairy and Wine Industry Effluents

The downstream processing of efficient biomass-based microbial biopesticides is heavily reliant on obtaining the largest concentration of viable cells in the most cost-effective manner. The goal of this research was to assess the ability of chitosan flocculation to recover bacterial Bacillus sp. BioSol021 biomass from the broth after biological treatment of wastewaters from the dairy and wine industries. Second-order factorial design models were used to estimate the effect of chitosan concentration and mixing speed on flocculation efficiency, settling velocity, and antimicrobial activity against Aspergillus flavus, i.e., inhibition zone diameter. Response surface methodology was followed by multi-objective optimization by applying the desirability function (DF) and genetic algorithm (GA). The optimum values for flocculation efficiency, settling velocity, and inhibition zone diameter for cheese whey effluent were 88%, 0.10 mm/s, and 51.00 mm, respectively. In the case of winery flotation effluent, the optimum values were flocculation efficiency 95% and settling velocity 0.05 mm/s, while the inhibition zone diameter was 48.00 mm. These results indicate that utilizing chitosan as a flocculation agent not only fits the criteria for effective downstream processing, but also has a synergistic effect on Bacillus sp. antibacterial activity.

A Comprehensive Review on Wastewater Nitrogen Removal and Its Recovery Processes

Discharging large amounts of domestic and industrial wastewater drastically increases the reactive nitrogen content in aquatic ecosystems, which causes severe ecological stress and biodiversity loss. This paper reviews three common types of denitrification processes, including physical, chemical, and biological processes, and mainly focuses on the membrane technology for nitrogen recovery. The applicable conditions and effects of various treatment methods, as well as the advantages, disadvantages, and influencing factors of membrane technologies, are summarized. Finally, it is proposed that developing effective combinations of different treatment methods and researching new processes with high efficiency, economy, and energy savings, such as microbial fuel cells and anaerobic osmotic membrane bioreactors, are the research and development directions of wastewater treatment processes.

Comparing with oxygen, nitrate simplifies microbial community assembly and improves function as an electron acceptor in wastewater treatment

Biochemical oxidation and reduction are key processes in treating biological wastewater and they require the presence of electron acceptors. The functional impact of electron acceptors on microbiomes provides strategies for improving the treatment efficiency. This research focused on two of the most important electron acceptors, nitrate and oxygen. Molecule ecological network, null model, and functional prediction based on high-throughput sequencing were used to analyze the microbiomes features and assembly mechanism. The results revealed nitrate via the homogeneous selection (74.0%) decreased species diversity, while oxygen via the homogeneous selection (51.1%) and dispersal limitation (29.6%) increased the complexity of community structure. Microbes that were more strongly homogeneously selected for assembly included polyphosphate accumulating organisms (PAOs), such as Pseudomonas and variovorax in the nitrate impacted community; Pseudomonas, Candidatus_Accumulibacter, Thermomonas and Dechloromonas, in the oxygen impacted community. Nitrate simplified species interaction and increased the abundance of functional genes involving in tricarboxylic acid cycle (TCA cycle), electron transfer, nitrogen metabolism, and membrane transport. These findings contribute to our knowledge of assembly process and interactions among microorganisms and lay a theoretical basis for future microbial regulation strategies in wastewater treatment.

Dairy and Wine Industry Effluents as Alternative Media for the Production of Bacillus-Based Biocontrol Agents

Food industry effluents represent one of the major concerns when it comes to environmental impact; hence, their valorization through different chemical and biological routes has been suggested as a possible solution. The vast amount of organic and inorganic nutrients present in food industry effluents makes them suitable substrates for microbial growth. This study suggests two valorization routes for whey as dairy industry effluent and flotation wastewater from the wine industry through microbial conversion to biocontrol agents as value-added products. Cultivations of the biocontrol strain Bacillus sp. BioSol021 were performed in a 16 L bioreactor to monitor the bioprocess course and investigate bioprocess kinetics in terms of microbial growth, sugar substrate consumption and surfactin synthesis, as an antimicrobial lipopeptide. The produced biocontrol agents showed high levels of biocontrol activity against mycotoxigenic strains of Aspergillus flavus, followed by a significant reduction of sugar load of the investigated effluents by the producing microorganisms. With proven high potential of whey and winery flotation wastewater to be used as substrates for microbial growth, this study provides grounds for further optimization of the suggested valorization routes, mostly in terms of bioprocess conditions to achieve maximal techno-economical feasibility, energy saving and maximal reduction of effluents' organic and inorganic burden.

The Use of Baikal Psychrophilic Actinobacteria for Synthesis of Biologically Active Natural Products from Sawdust Waste

One of the relevant areas in microbiology and biotechnology is the study of microorganisms that induce the destruction of different materials, buildings, and machines and lead to negative effects. At the same time, the positive ecological effects of degradation can be explained by the detoxication of industrial and agricultural wastes, chemical substances, petroleum products, xenobiotics, pesticides, and other chemical pollutants. Many of these industrial wastes include hard-to-degrade components, such as lignocellulose or plastics. The biosynthesis of natural products based on the transformation of lignocellulosic wastes is of particular interest. One of the world’s unique ecosystems is presented by Lake Baikal. This ecosystem is characterized by the highest level of biodiversity, low temperatures, and a high purity of the water. Here, we studied the ability of several psychrophilic representatives of Baikal Actinobacteria to grow on sawdust wastes and transform them into bioactive natural products. Different strains of both widely spread genus of Actinobacteria and rare genera of Actinobacteria were tested. We used the LC-MS methods to show that Actinobacteria living in sawmill wastes can produce both known and novel natural products with antibiotic activity. We demonstrated that the type of sawmill wastes and their concentration influence the Actinobacteria biosynthetic potential. We have shown for the first time that the use of Baikal psychrophilic microorganisms as a factory for biodegradation is applicable for the transformation of lignocellulosic wastes. Thus, the development of techniques for screening novel natural products leads to an elaboration on the active ingredients for novel drugs.

Simultaneous sludge minimization, pollutant and nitrogen removal using integrated MBBR configuration for tannery wastewater treatment

An advanced operational configuration of anoxic-aerobic moving bed biofilm reactors (AMOMOX process) was experimentally demonstrated to achieve simultaneous sludge yield minimization, pollution and nitrogen removal. The AMOMOX experimentation witnessed considerable variation in process parameters while feed operation changed from synthetic wastewater to real tannery influent. The strict maintenance of operational strategies resulted prominent removal of TCOD, SCOD, ammonia nitrogen and total nitrogen higher upto 93.5%, 94.8%, 95.2% and 88.7% respectively. The nourishment of filamentous microbiota and purposeful promotion of cell-lysis effectively sustained sludge yield restriction. Here, the sludge yield (Y_obs) lowering upto 0.51 gVSS/gCOD ultimately turned an overall sludge minimization of 46.8% compared with a parallel-run conventional activated sludge treatment. The observations were further supported by sophisticated instrumental imaging, thermogravimetric analysis and batch digestion test of the sludge pool. The experimental Y_obs and corresponding solids retention showed consensus with the reported correlation model and, thus, a modified correlation was tested.

Magnetic and electric field accelerate Phytoextraction of copper Lemna minor duckweed

In accordance with the opinion of the World Health Organization and the World Water Council the development of effective technologies for the treatment of wastewater from heavy metals for their discharge into water bodies or reuse is an urgent task nowadays. Phytoremediation biotechnologies is the most environmentally friendly and cheapest way of the treatment of wastewater, suitable for sustainable development principals. The main disadvantage of the phytoremediation is the slow speed of the process. A method for accelerating the process of phytoremediation by the combined effect of magnetic and weak electric fields is proposed. The purpose of this study is to determine the values of the parameters of the magnetic and weak electric fields that are most suitable for extracting cuprum ions from wastewater using the higher aqua plants (Lemna minor). A corresponding technological process based on the results of the study is proposed. The results have shown that the removal of copper cations from sulfate solutions effectively occurs in the initial period of time (1–5 hours) under the influence of a magnetic field with an intensity of H = 2 kA/m. Under the combined influence of an electrical current with density j = 240 μA/cm² and a magnetic field (H = 2 kA/m) the highest rate of copper extraction by duckweed leaves is achieved. Under these conditions, the greatest growth and development of plant leaves occurs. The paper presents the results of determining of the parameters of the electrochemical release from the eluate of the spent phytomass of duckweed. It has been determined that the release of metal occurs at E = 0.32 V. An original scheme for wastewater treatment from copper with subsequent separation of copper from the spent phytomass of duckweed is proposed. In general, the presented results are a scientific justification of wastewater treatment technologies and a contribution to resolving the crisis in the field of fresh water supply. An important contribution in the circular economy is a technology recommendation proposed for recovering copper from duckweed after wastewater treatment.

Circling the drain: A systems analysis of opportunities for enhanced sewer self-purification technologies in wastewater management

The shift of discussions on wastewater management to realize a circular water economy requires rethinking of how the existing systems are managed. The collection system, a physical infrastructure that collects and transports wastewater, is often overlooked in innovation studies in wastewater management. Hence, a review of the collection system is required to realize overlooked innovation points, especially those of its functions and configurations. In this paper, we highlight the possibility of the collection system to contribute to wastewater management, not only to collect and transport wastewater, but to treat wastewater through enhancing sewer self-purification. To realize this, a systems analysis of the forms and functions of the collection system was first conducted to see how the collection system supports different wastewater management systems. It was found that emphasis on the collection system's function to treat wastewater is beneficial because of the transition of wastewater management towards a circular water economy. Second, a scenario analysis of applying enhanced sewer self-purification technologies was conducted to determine communities which would most benefit from using the collection system to treat wastewater. The findings highlight that communities with as much as 100 cap ha-1, typical of urban peripheries, could have their pollutant load reduced to about half if the pipe length per capita is 5 m. It was seen in this study that while the collection system supports wastewater management by functioning to collect and transport wastewater, it can further be elevated into a treatment technology within appropriate localities and thus, contribute to a circular water economy.

Microbial interspecific interaction and nitrogen metabolism pathway for the treatment of municipal wastewater by iron carbon based constructed wetland

In order to explore the pollutant removal performance and interspecific interaction in constructed wetland (CW) with Fe₀-C filler, constructed wetland with Fe₀-C filler (CW-Fe) and with ceramsite filler (CW-C) were set up. Besides, the nutrients removal and interspecific interaction were analyzed, and the results showed that total nitrogen (TN) removal efficiency of CW-Fe system without carbon source was lower than that in CW-C system though CW-Fe system could convert macro-molecular organic matter into micro-molecular organic matter. However, ammonia nitrogen (NH₄⁺-N) increase was observed in CW-Fe system with better total phosphorus (TP) removal performance. High-throughput sequencing showed that the microbial richness and abundance of Bacteroides, Firmicutes, Chlorofeli and Actinobacteria in the CW with Fe₀-C filler was significantly higher than with ceramsite filler. The interaction between two CWs was significantly different, and the functional enzymes abundance of nitrate nitrogen (NO₃^--N) to NH₄⁺-N transformation in CW-Fe system significantly increased.