Fouling of offshore structures in China--a review

Exploring fishery waste potential as antifouling component

Marine biofouling is a global issue with economic and ecological implications. Existing solutions, such as biocide-based antifouling paints, are toxic for the environment. The search for better antifouling agents remains crucial. Recent research focuses on eco-friendly antifouling paints containing natural compounds like enzymes. This study evaluates enzymatic extracts from fishery residues for antifouling potential. Extracts from Pleoticus muelleri shrimp, Illex argentinus squid, and Lithodes santolla king crab were analyzed. Proteolytic activity and thermal stability were assessed, followed by bioassays on mussel byssus thread formation and barnacle cypris adhesive footprints. All three extracts demonstrated proteolytic activity and 24-h stability at temperate oceanic temperatures, except I. argentinus. P. muelleri extracts hindered cyprid footprint formation and mussel byssus thread generation. Further purification is required for L. santolla extract to assess its antifouling potential activity. This study introduces the use of fishery waste-derived enzyme extracts as a novel antifouling agent, providing a sustainable tool to fight against biofouling formation.

Establishing an Agenda for Biofouling Research for the Development of the Marine Renewable Energy Industry in Indonesia

Marine renewable energy holds strategic potential in Indonesia, not only to meet the target of renewable energy share in the national energy mix but also to provide equal access to clean energy throughout the archipelago. Marine energy in Indonesia is still in the early phase of development, which mainly focusses on resources assessment and power generation through technology prototype testing. Based on a review of available literature, it is found that specific research on the effects of biofouling on material durability of marine energy infrastructure in Indonesia has yet to be addressed. In this study, a matrix that identifies and predicts key fouling organisms and their possible risks on marine renewable energy infrastructure in tropical waters of Indonesia is developed by analysing previous findings in temperate and subtropical waters. Based on the matrix developed, calcareous polychaetes (Serpulidae), barnacles (Amphibalanus spp.), and bivalves (Perna viridis) are among possible key fouling organisms that might pose risks to marine energy infrastructure in Indonesia, such as by adding weight and drag and causing corrosion. Further studies and detailed and statistically robust analysis of the biofouling and its impacts are needed to support the development of the technological performance of marine renewable energy in Indonesia.

Raposo MM. Optical Fiber Sensors for Biocide Monitoring: Examples, Transduction Materials, and Prospects

Antifouling biocides are toxic to the marine environment impacting negatively on the aquatic ecosystems. These biocides, namely, tributyltin (TBT) and Cu(I) compounds, are used to avoid biofouling; however, their toxicity turns TBT and Cu(I) monitoring an important health issue. Current monitoring methods are expensive and time-consuming. This review provides an overview of the actual state of the art of antifouling paints' biocides, including their impact and toxicity, as well as the reported methods for TBT and Cu(I) detection over the past decade. The principles of optical fiber sensors (OFS) applications, with focus on environmental applications, and the use of organic chemosensors in this type of sensors are debated. The multiplexing ability of OFS and their application on aquatic environments are also discussed.

The role of artificial material for benthic communities - Establishing different concrete materials as hard bottom environments

Concrete is used in marine coastal constructions worldwide. These structures are colonized by specialized hard-bottom biota consisting of macroalgae and benthic macrofauna. As concrete manufacturers face challenges such as limited natural resources and high CO2-emissions, the need for supplementary materials increases. Still, there has been little research on the reaction of species to the differences in concrete composition and what ecological impact these reactions could have. This study addresses the questions (1) if there are differences in settlement communities, depending on differences in concrete constitutes and (2) if so, what are the consequences for the usability of alternative concretes in marine constructions. For the experiment 15 cubes (15 × 15 × 15 cm) made of five different concretes, containing different cements (Portland cement and blast furnace cements) and aggregates (sand, gravel, iron ore and metallurgical slags) were deployed in a natural hard bottom experimental field near Helgoland Island (German Bight) in April 2016. After 12 months, all cubes were examined regarding species composition and coverage, followed by statistical analysis (PERMANOVA, SIMPER, DIVERSE). Results indicate differences in settlement communities for different surface orientation (Top, Front/Back) of the cubes. Significant differences in settlement communities of the Front/Back side were present depending on the used material type. However, the found differences in settlement between the concrete types tested are not sufficiently clear to provide recommendations for their usability in coastal constructions.

Mediators of invasions in the sea: life history strategies and dispersal vectors facilitating global sea anemone introductions

Widespread non-native species tend to demonstrate an apparent lack of selectivity in habitat requirements, feeding regimes, and reproductive needs, while displaying a tendency to thrive in human-modified habitats. The high phenotypic plasticity typical of sessile, substrate-attached marine species may enhance their chances of survival and spread in a new region. Anthropogenic activities have changed marine habitats over a wide range of phenomena, including water temperature, community species composition, and the types of available substrates, creating new physical and biotic regimes that may contribute to the potential for successful species introduction. Here we examine ten species of sea anemones that have been introduced outside of their native range, and elucidate specific characteristics that are common among globally introduced sea anemones. Various life history strategies enable these species to survive and flourish through transport, introduction, establishment and spread, leading to the successful colonization of a new geographic area. Considering life history strategies and weighing of vector potential, we suggest conditions that facilitate introduction of these species, and identify species of sea anemones that may be introduced in the future in the face of changing climate and increased anthropogenic activities.

Control of biofouling on pearl oysters Pinctada imbricata using wax and Chinese herbs

Biofouling poses severe challenges to pearl oyster Pinctada imbricata culture in China, and controlling it is both labor- and capital-intensive. The antifouling properties of wax, and wax mixed with Chinese herbs, sprayed onto pearl oyster shell surfaces during peak biofouling seasons were evaluated. Pearl oysters coated with three wax treatments (plain wax, Chinaberry seed extract, Chinese honeylocust fruit extract) and a control (no treatment), were cultured in nets for up to 60 days. Mortality rate, fouling organism and pearl-oyster weights, and shell height are reported for individual oysters on each of six sampling dates. With the exception of oysters submerged for 12 days, all oysters were significantly affected by treatment type and submersion duration. Fouling weight increased more rapidly over time in the control-treatment oysters. Wax-based coatings deterred fouling-organism settlement on oysters for at least 2 months during the intensive fouling season, reducing mortality and not adversely effecting growth.

Characterization of the Use of Low Frequency Ultrasonic Guided Waves to Detect Fouling Deposition in Pipelines

The accumulation of fouling within a structure is a well-known and costly problem across many industries. The build-up is dependent on the environmental conditions surrounding the fouled structure. Many attempts have been made to detect fouling accumulation in critical engineering structures and to optimize the application of power ultrasonic fouling removal procedures, i.e., flow monitoring, ultrasonic guided waves and thermal imaging. In recent years, the use of ultrasonic guided waves has been identified as a promising technology to detect fouling deposition/growth. This technology also has the capability to assess structural health; an added value to the industry. The use of ultrasonic guided waves for structural health monitoring is established but fouling detection using ultrasonic guided waves is still in its infancy. The present study focuses on the characterization of fouling detection using ultrasonic guided waves. A 6.2-m long 6-inch schedule 40 carbon steel pipe has been used to study the effect of (Calcite) fouling on ultrasonic guided wave propagation within the structure. Parameters considered include frequency selection, number of cycles and dispersion at incremental fouling thickness. According to the studied conditions, a 0.5 dB/m drop in signal amplitude occurs for a fouling deposition of 1 mm. The findings demonstrate the potential to detect fouling build-up in lengthy pipes and to quantify its thickness by the reduction in amplitude found from further numerical investigation. This variable can be exploited to optimize the power ultrasonic fouling removal procedure.

Numerical modelling of acoustic pressure fields to optimize the ultrasonic cleaning technique for cylinders

Fouling build up is a well-known problem in the offshore industry. Accumulation of fouling occurs in different structures, e.g. offshore pipes, ship hulls, floating production platforms. The type of fouling that accumulates is dependent on environmental conditions surrounding the structure itself. Current methods deployed for fouling removal span across hydraulic, chemical and manual, all sharing the common disadvantage of necessitating halting production for the cleaning process to commence. Conventionally, ultrasound is used in ultrasonic baths to clean a submerged component by the generation and implosion of cavitation bubbles on the fouled surface; this method is particularly used in Reverse Osmosis applications. However, this requires the submersion of the fouled structure and thus may require a halt to production. Large fouled structures such as pipelines may not be accommodated. The application of high power ultrasonics is proposed in this work as a means to remove fouling on a structure whilst in operation. The work presented in this paper consists of the development of a finite element analysis model based on successful cleaning results from a pipe fouled with calcite on the inner pipe wall. A Polytec 3D Laser Doppler Vibrometer was used in this investigation to study the fouling removal process. Results show the potential of high power ultrasonics for fouling removal in pipe structures from the wave propagation across the structure under excitation, and are used to validate a COMSOL model to determine cleaning patterns based on pressure and displacement distributions for future transducer array design and optimization.

The impact of artificial surfaces on marine bacterial and eukaryotic biofouling assemblages: A high-throughput sequencing analysis

Vessel hulls and underwater infrastructure can be severely impacted by marine biofouling. Knowledge on which abiotic conditions of artificial structures influence bacterial and eukaryotic community composition is limited. In this study, settlement plates with differing surface texture, orientation and copper-based anti-fouling coatings were deployed in a marina. After three months, biofouling samples were collected and bacterial and eukaryotic communities characterised using DNA metabarcoding. The copper anti-fouling coating treatments incurred the most significant compositional changes (p ≤ 0.001) within both domains. Bacterial diversity decreased, with Gammaproteobacteria becoming the dominant phylum. In contrast, protist diversity increased as well as opportunist nematodes and bryozoans; urochordates and molluscs became less abundant. Network analyses displayed complex relationships on untreated plates, while revealing a simpler, but disturbed and unstable community composition on the anti-fouling coated plates. These networks of copper treatments displayed opportunist taxa that appeared as key organisms in structuring the bacterial and eukaryotic communities.

Characterisation of the biofouling community on a floating wave energy device

Wave energy devices are novel structures in the marine environment and, as such, provide a unique habitat for biofouling organisms. In this study, destructive scrape samples and photoquadrats were used to characterise the temperate epibenthic community present on prototypes of the Pelamis wave energy converter. The biofouling observed was extensive and diverse with 115 taxa recorded including four non-native species. Vertical zonation was identified on the sides of the device, with an algae-dominated shallow subtidal area and a deeper area characterised by a high proportion of suspension-feeding invertebrates. Differences in species composition and biomass were also observed between devices, along the length of the device and between sampling dates. This research provides an insight into the variation of biofouling assemblages on a wave energy device as well as the potential technical and ecological implications associated with biofouling on marine renewable energy structures.

Marine Fouling Assemblages on Offshore Gas Platforms in the Southern North Sea: Effects of Depth and Distance from Shore on Biodiversity

Offshore platforms are known to act as artificial reefs, though there is on-going debate on whether this effect is beneficial or harmful for the life in the surrounding marine environment. Knowing what species exist on and around the offshore platforms and what environmental variables influence this species assemblage is crucial for a better understanding of the impact of offshore platforms on marine life. Information on this is limited for offshore platforms in the southern North Sea. This study aims to fill this gap in our knowledge and to determine how the composition and the abundance of species assemblages changes with depth and along a distance-from-shore gradient. The species assemblages on five offshore gas platforms in the southern North Sea have been inventoried using Remotely Operated Vehicles inspection footage. A total of 30 taxa were identified. A Generalised Additive Model of the species richness showed a significant non-linear relation with water depth (p = 0.001): from a low richness in shallow waters it increases with depth until 15–20 m, after which richness decreases again. Using PERMANOVA, water depth (p≤0.001), community age (p≤0.001) and the interaction between distance from shore and community age (p≤0.001) showed a significant effect on the species assemblages. Future research should focus on the effect additional environmental variables have on the species assemblages.

RAFT polymerization of bromotyramine-based 4-acryloyl-1,2,3-triazole: a functional monomer and polymer family through click chemistry

A series of bromotyramine-based 4-acryloyl-1,2,3-triazole monomers and polymers using click chemistry and RAFT polymerization.

Influence of Crassostrea gigas on the permeability and microstructure of the surface layer of concrete exposed to the tidal zone of the Yellow Sea

Concrete exposed to the tidal zone of the Yellow Sea and bearing Crassostrea gigas (CG) with differing areal coverages was investigated for evidence of biologically induced corrosion prevention. The experimental results indicated that both the chloride ion profile and the neutralization depth of the concrete decreased with increasing CG coverage. Moreover, the water absorption rate and the chloride ion permeability of concrete with the original surface intact also declined with increasing degrees of CG coverage. However, the water absorption rates of three concrete samples with 2 mm of the surface layer removed were similar, as was their chloride ion permeability. Mercury intrusion porosimetry tests indicated that CG significantly reduced the pore structure of the concrete surface layer. SEM observation revealed that the CG cementation membrane and left valve were tightly glued to the concrete surface and had a dense structure. Concrete durability indices showed that high CG coverage greatly improved concrete durability.

Semisubmersible oil platforms: understudied and potentially major vectors of biofouling-mediated invasions

Biofouling has long been recognised as a major pathway for the introduction of non-indigenous species. This study records the decapods and stomatopod crustaceans fouling a semisubmersible oil platform dry docked for hull cleaning in Jurong Port, Singapore. Of the 25 species of decapods identified, 13 were non-indigenous and represent new records to Singapore waters. Of these, the crabs Glabropilumnus seminudus and Carupa tenuipes are known to be invasive in other parts of the world. The stomatopod, Gonodactylaceus randalli, is the first mantis shrimp recorded in a biofouling community. The richness and diversity of this fouling community, consisting of many vagile species, highlights the difference between platforms and ships. With the expansion of maritime oil and gas exploration, the threat posed by an expanded fleet of semisubmersible oil platforms translocating non-indigenous fouling communities across biogeographical boundaries is very serious. Scientists, policy-makers, and stakeholders should turn their attention to this growing problem.

Challenges for the development of new non-toxic antifouling solutions

Marine biofouling is of major economic concern to all marine industries. The shipping trade is particularly alert to the development of new antifouling (AF) strategies, especially green AF paint as international regulations regarding the environmental impact of the compounds actually incorporated into the formulations are becoming more and more strict. It is also recognised that vessels play an extensive role in invasive species propagation as ballast waters transport potentially threatening larvae. It is then crucial to develop new AF solutions combining advances in marine chemistry and topography, in addition to a knowledge of marine biofoulers, with respect to the marine environment. This review presents the recent research progress made in the field of new non-toxic AF solutions (new microtexturing of surfaces, foul-release coatings, and with a special emphasis on marine natural antifoulants) as well as the perspectives for future research directions.

Predicted concentrations of biocides from antifouling paints in Visakhapatnam Harbour

The concentrations of biocides leached from antifouling coatings are monitored in most of the developed countries. However, in India and many other developing countries, there is very little data available on the concentrations of biocides in ports and harbours. The first step was to obtain the order of magnitude levels of concentrations of biocides in the marine environment of the Visakhapatnam Harbour, and the MAM-PEC (Marine Antifoulant Model to Predict Environmental Concentrations) model was used to predict these values. The Visakhapatnam Port lies on the eastern coast of India, roughly halfway between Chennai and Kolkata, and is the largest port in India. This port is a natural harbour; the long and narrow outlet to the open sea makes it a 'poorly flushed' harbour. Predicted concentrations of tributyltin (TBT), copper, dichlofluanid, seanine, irgarol, diuron, tolylfluanid, and zinc pyrithione were computed. The results of the computations indicate that the levels of these biocides are comparable to those in many western countries. This gives credence to the fact that persistence of TBT and some other biocides is a global problem that cannot be ignored.

Fouling reefal communities on artificial reefs: does age matter?

Man-made submerged structures, including shipwrecks, offering substrata for fouling organisms and fish, have been classified secondarily as artificial reefs (ARs). The current approach in AR design is that of low-profile structures placed on the seabed and attempting to mimic natural reef (NR) communities with the aim of mitigating degraded marine ecosystems. To examine the validity of this concept, a long-term comparison of the developing AR fouling communities to those of nearby NRs is required. A survey of the fouling reefal organisms was conducted on seven shipwrecks (Red Sea, Egypt), comprising three young (ca 20 years old) and four old (>100 years old) unplanned ARs, in comparison to nearby NR communities. The hypothesis tested was that the age of the ARs shapes the structure of their fouling coral communities. The results demonstrated distinct differences between ARs and NRs and between young and old ARs. While the species composition on ARs may resemble that of NRs after approximately 20 years, obtaining a similar extent of coral cover may require a full century. Moreover, differences in structural features between ARs and NRs may lead to differences in species composition that persist even after 100 years.