Encapsulation of food ingredients

Microencapsulation of Hibiscus sabdariffa L. extract using porous starch and gum Arabic: Optimized process, characterization, stability, and simulated gastrointestinal conditions

Hibiscus extract exhibits considerable antioxidant activity and a high anthocyanin content, which suggesting potential health benefits. However, these compounds are highly susceptible to environmental factors. The aim of this study was to establish the optimal conditions for the encapsulation of Hibiscus sabdariffa extract (HSE) using mixed porous maize starch-gum Arabic to enhance the stability of bioactive compounds under accelerated aging conditions. Response surface methodology (RSM) was used to optimize microencapsulation conditions through spray drying. The optimal conditions for microencapsulation of HSE by RSM were determined to be 126 °C at the inlet temperature (IT) and 8.5 % at the total solid content (TSC). Using these conditions, the amount of bioactive compounds in optimized microcapsules (OMs) was 2368 mg GAE/100 g, 694 mg QE/100 g, and 930 mg EC3G/100 g, of phenolic compounds, flavonoids, and anthocyanin, respectively. The release rate of anthocyanins during in vitro digestion was more effectively regulated in the OM sample, which retained up to 40 % of anthocyanins compared with 10 % in the HSE. The experimental values in this study exhibit high assertiveness, which renders the optimization model technologically and financially viable for the encapsulation of bioactive compounds with potential use in the food and pharmaceutical industries.

Microencapsulation technology for delivery of enzymes in ruminant feed

The ruminant digestive system is uniquely designed to make efficient use of high-fibre feed, including forages. Between 40 to 100% of the ruminant diet consists of forages which are high in fibre and up to 70% of this may remain undigested in the ruminant gut, with substantial impact on feed utilisation rate and productivity and the economic and environmental sustainability of livestock production systems. In ruminants, feed costs can make up to 70% of the overall cost of producing an animal product. Increasing feed utilisation efficiency, i.e., more production with less feed lowers feeding costs and improves livestock economic viability. Strategies for improving nutrient utilisation in animal feed has been investigated over the years. Incorporation of fibre digesting enzymes in the feed to facilitate the digestion of the residual fibre in hind gut is one of the proposed strategies. However, delivering such enzymes to the hind gut in active state is challenging due to the unfavourable biochemical environment (pH, microbial proteases) of ruminant's gastrointestinal tract. This review discusses the potential application of microencapsulation for protected and targeted delivery of enzymes into the hind gut of ruminants.

Electrostatic spray drying: A new alternative for drying of complex coacervates

Complex coacervation can be used for controlled delivery of bioactive compounds (i.e., flaxseed oil and quercetin). This study investigated the co-encapsulation of flaxseed oil and quercetin by complex coacervation using soluble pea protein (SPP) and gum arabic (GA) as shell materials, followed by innovative electrostatic spray drying (ES). The dried system was analyzed through encapsulation efficiency (EE) and yield (EY), morphological and physicochemical properties, and stability for 60 days. Small droplet size emulsions were produced by GA (in the first step of complex coacervation) due to its greater emulsifying activity than SPP. Oil EY and EE, moisture, and water activity in dried compositions ranged from 75.7 to 75.6, 76.0-73.4 %, 3.4-4.1 %, and 0.1-0.2, respectively. Spherical microcapsules were created with small and aggregated particle size but stable for 60 days. An amount of 8 % of quercetin remained in the dried coacervates after 60 days, with low hydroperoxide production. In summary, when GA is used as the emulsifier and SPP as the second biopolymer in the coacervation process, suitable coacervates for food applications are obtained, with ES being a novel alternative to obtain coacervates in powder, with improved stability for encapsulated compounds. As a result, this study helps provide a new delivery system option and sheds light on how the characteristics of biopolymers and the drying process affect coacervate formation.

Microencapsulation of Vitis vinifera grape pulp phenolic extract using maltodextrin and its application in gummy candy enrichment

Phenolic extract of Vitis vinifera grape pulp was prepared using ultrasonication at frequencies of 28, 40, and 28-40 kHz with a 1:10, 1:15, and 1:20 ratio of solid (grape pulp) to water. The 1:10 ratio and 40 kHz frequency were considered optimal conditions for the preparation of red grape pulp extract (RGPE). Then, RGPE was encapsulated within maltodextrin using a spray drying technique, and the produced powder was used in the gummy candy production. The results revealed that the phenolic content of the powder was almost constant during the storage time. The solubility of the powder decreased, whereas its moisture content increased during the 45-day storage period. The results of scanning electron microscopy showed that the produced microparticles had spherical shapes with a micron size. Fourier-transform infrared spectroscopy and X-ray diffraction showed that RGPE was encapsulated in the structure of maltodextrin through the formation of hydrogen bonds, considering the amorphous structure of the powder. The antioxidant properties of the microencapsulated RGPE containing gummy candy were preserved. Sensory evaluation and colorimetric values of the enriched gummy candy had acceptable results compared to the control sample. In general, microencapsulation of RGPE within maltodextrin as a carrier using the spray drying technique and its application in gummy candy enrichment could be useful.

Gum Ghatti: A Comprehensive Review on Production, Processing, Remarkable Properties, and Diverse Applications

Gum ghatti, popularly known as Indian gum and obtained from Anogeissus latifolia, is a complex high-molecular-weight, water-soluble, and swellable nonstarch polysaccharide comprised of magnesium and calcium salts of ghattic acids and multiple monosugars. Unlike other nontimber forest produce, gums ghatti is a low-volume but high-value product. It has several applications and is widely used as food, in pharmaceuticals, and for wastewater treatment and hydrogel formation, and it has attracted a great deal of attention in the fields of energy, environmental science, and nanotechnology. Industrial applications of gum ghatti are primarily due to its excellent emulsification, stabilization, thickening, heat tolerance, pH stability, carrier, and biodegradable properties. However, utilization of gum ghatti is poorly explored and implemented due to a lack of knowledge of its production, processing, and properties. Nevertheless, there has been interest among investigators in recent times for exploring its production, processing, molecular skeleton, and functional properties. This present review focuses on production scenarios, processing aspects, structural and functional properties, and potential applications in the food, pharmaceuticals, nonfood, and other indigenous and industrial usages.

Bioactivity of Microencapsulated Cell-Free Supernatant of Streptococcus thermophilus in Combination with Thyme Extract on Food-Related Bacteria

The bioactive properties of the combination of microencapsulated cell-free supernatant (CFS) from Streptococcus thermophilus and thyme extract on food-related bacteria (Photobacterium damselae, Proteus mirabilis, Vibrio vulnificus, Staphylococcus aureus ATCC29213, Enterococcus faecalis ATCC29212, and Salmonella Paratyphi A NCTC13) were investigated. The microencapsulated CFS of S. thermophilus, in combination with ethanolic thyme extract, had a particle size in the range of 1.11 to 11.39 µm. The microencapsulated CFS of S. thermophilus had a wrinkled, spherical form. In the supernatant, especially at 2% (v/w), the thyme extract additive caused a decrease in the wrinkled form and a completely spherical structure. A total of 11 compounds were determined in the cell-free supernatant of S. thermophilus, and acetic acid (39.64%) and methyl-d3 1-dideuterio-2-propenyl ether (10.87%) were the main components. Thyme extract contained seven components, the main component being carvacrol at 67.96% and 1,2,3-propanetriol at 25.77%. Significant differences (p < 0.05) were observed in the inhibition zones of the extracts on bacteria. The inhibitory effect of thyme extract on bacteria varied between 25.00 (P. damselae) and 41.67 mm (V. vulnificus). Less antibacterial activity was shown by the microencapsulated CFS from S. thermophilus compared to their pure form. (p < 0.05). As a result, it was found that microencapsulated forms of CFS from S. thermophilus, especially those prepared in combination with 2% (v/w) thyme extract, generally showed higher bioactive effects on bacteria.

Development of functional noodles by encapsulating mango peel powder as a source of bioactive compounds

Antioxidant compounds such as phenolics and carotenoids scavenge reactive oxygen species and protect against degenerative diseases such as cancer and cardiovascular disease when used as food additives or supplements. Mango peel is a by-product of mango which is a good source of bioactive substances such as phytochemicals, antioxidants, and dietary fibers. Unfortunately, the study on mango peel as a potential food additive is very limited. Accordingly, the present study aimed to develop functional noodles through extrusion technology with the encapsulation of mango peel powder as a natural source of bioactive compounds. First, mango peel powder (MPP) was prepared and incorporated during the mixing of ingredients before noodles formation at three different levels (2.5, 5 and 7.5 %). Afterward, the noodles were studied to determine how the encapsulated MPP affects the proximate composition, physicochemical characteristics, polyphenols, carotenoids, anthocyanin, antioxidant and antidiabetic activity, and sensory characteristics. The noodles exhibited a dose-dependent relationship in the content of bioactive components and functional activities with the encapsulation of MPP levels. A significantly (p 0.05) higher value was noticed in 7.5 % of MPP-encapsulated noodles than in any level of MPP encapsulation in noodles. The fiber and protein contents in the MPP-encapsulated noodles were increased by about 0-1.22 % and 0-3.16 %, respectively. However, noodles' color index and water absorption index were decreased with the level of MPP encapsulation. The cooking loss of noodles increased from 4.64 to 5.17, 6.49, and 7.32 %, whereas the cooked weight decreased from 35.11 to 34.40, 33.65, and 33.23 % with 2.5, 5.0, and 7.5 % of MPP encapsulation, respectively. However, MPP was stable during storage of noodles exhibiting higher phenolic content and antioxidant activity than control samples. The sensory evaluation showed that MPP-encapsulated noodles at levels 2.5 and 5 % had approximately similar overall acceptability values with the control sample. As a result of the findings, it appears that adding MPP up to 5 % to noodles improves their nutritional quality without changing their cooking, structural, or sensory aspects. Therefore, mango peel powder can be a potential cheap source for the development of functional noodles and food ingredients.

Encapsulation of Bioactive Compounds from Germinated Mung Bean by Freeze-Drying, Release Kinetics, and Storage Stability

This research explores the application of germinated mung bean extract, rich in GABA (Gamma-aminobutyric acid) and polyphenols, in enhancing human health. Recognizing the instability of these bioactive compounds in environmental conditions, encapsulation emerges as a pivotal technique to broaden their applications in food and pharmaceuticals. Utilizing response surface methodology and Box-Behnken design, the freeze-drying formulation for encapsulating the aqueous extract was optimized. Second-order polynomial models were developed, exhibiting statistical adequacy in predicting key variables such as encapsulation efficiency for GABA (EE-GABA) and total polyphenol content (EE-TPC), as well as encapsulation yield for GABA (EY-GABA) and total polyphenol content (EY-TPC). The established optimal formulation was validated, resulting in predicted values for EE-GABA, EE-TPC, EY-GABA, and EY-TPC. The release kinetics of encapsulated particles were investigated, highlighting the suitability of the Korsmeyer-Peppas and Higuchi models. Assessing the stability of the encapsulated powder under varying temperatures and humidities revealed degradation rates, half-life, and activation energy, with moisture equilibrium established at 4.70%, indicative of long-term stability. In conclusion, the encapsulated germinated mung bean powder demonstrates high stability, making it a promising candidate for integration into food products and functional ingredients.

Probiotic Lactobacillus paragasseri K7 Nanofiber Encapsulation Using Nozzle-Free Electrospinning

Probiotics are live microorganisms that can have beneficial effects on humans. Encapsulation offers them a better chance of survival. Therefore, nozzle-free electrospinning was introduced for their embedding in nanofibrous material. Probiotic Lactobacillus paragasseri K7 in lyophilized and fresh form, with and without inulin as prebiotic, was added to a polymer solution of sodium alginate (NaAlg) and polyethylene oxide (PEO). Conductivity, viscosity, pH, and surface tension were determined to define the optimal concentration and volume ratio for smooth electrospinning. The success of the formed nanoscale materials was examined by scanning electron microscope (SEM), while the entrapment of probiotics in the nanofibrous mats was detected by attenuated total reflection-Fourier transform infrared spectroscopy (ATR-FTIR) and X-ray photoelectron spectroscopy (XPS). Spontaneous diffusion of bacteria from electrospun samples in PBS buffer pH 7.4 was studied by plate counting on MRS agar. By exposing polymer solutions containing L. paragasseri K7 and inulin to a high electric field, the nanofilm was formed on a polypropylene substrate, used as collecting material. When polymer solutions without inulin were used, the bead-like nanofibers may have become visible. The SEM results suggest that inulin, in addition to K7 strain, additionally lowers the conductivity of spinning macromolecular solution and hinders the nanofiber formation. The results of ATR-FTIR confirmed the presence of L. paragasseri K7 embedded in nanocomposites by the appearance of characteristic peaks. The samples containing the probiotic regardless of its form with inulin had similar surface composition, except that the sodium content was higher in the samples with fresh probiotic, probably due to greater and thus less easy embedding of the bacteria in NaAlg. Within 2 h, the largest amount of probiotic strain K7 was spontaneously released from the electrospun sample containing the inulin and probiotic in freeze-dried form (44%), while the amount released from the nanofibrous sample, which also contained the inulin and probiotic in fresh form, was significantly lower (21%). These preliminary results demonstrate the potential of nozzle-free electrospinning technology for the development of probiotic delivery systems for short-term use, such as feminine hygiene materials (tampons, pads, napkins).

Optimization of complex coacervation parameters for the production of encapsulated black garlic using response surface methodology

The purpose of this study was to optimize black garlic encapsulation parameters (core/coating ratio, extract concentration, and coacervate/maltodextrin [MD] ratio) using central composite design of the response surface methodology based on encapsulation efficiency (EE) (%). The optimum parameters were determined as 4.0 for the coating material/core ratio, 50% for the extract concentration, and 6.0 for the MD/coacervate ratio depending on the EE (%). The antioxidant activity values were determined as 101 and 134 µmol Trolox/100 g dry weight (DW) for the 2,2-diphenyl-1-picrylhydrazyl and 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) methods, respectively, whereas the total phenolic content was 49 mg gallic acid equivalent/100 g DW for the encapsulated black garlic samples. S-Allyl-l-cysteine (SAC), γ-l-glutamyl-SAC (GSAC), γ-l-glutamyl-(S)-trans-1-propenyl-l-cysteine, and allicin were the organosulfur (OS) compounds determined in the samples. The SAC concentration of the encapsulated black garlic samples was determined as 22.36 mg/g, whereas the GSAC content was found at a lower concentration (0.33 mg/g) compared to SAC. The allicin content was quantified to be 0.31 mg/g. The encapsulated samples were also characterized by scanning electron microscopy (SEM) and Fourier transform infrared (FT-IR) spectroscopy. The FT-IR analysis revealed specific functional groups, including hydroxyl, carbonyl, and glycosidic linkage. The interaction between lentil protein isolate and pectin was strong enough to encourage capsule formation as visualized in the SEM images. This study shows the potential of black garlic coacervates as a functional ingredient for the food industry due to their stability, solubility, and preservation of OS and antioxidant compounds.

Wall Materials for Encapsulating Bioactive Compounds via Spray-Drying: A Review

Spray-drying is a continuous encapsulation method that effectively preserves, stabilizes, and retards the degradation of bioactive compounds by encapsulating them within a wall material. The resulting capsules exhibit diverse characteristics influenced by factors such as operating conditions (e.g., air temperature and feed rate) and the interactions between the bioactive compounds and the wall material. This review aims to compile recent research (within the past 5 years) on spray-drying for bioactive compound encapsulation, emphasizing the significance of wall materials in spray-drying and their impact on encapsulation yield, efficiency, and capsule morphology.

Functional roles and novel tools for improving-oxidative stability of polyunsaturated fatty acids: A comprehensive review

Polyunsaturated fatty acids may be derived from a variety of sources and could be incorporated into a balanced diet. They protect against a wide range of illnesses, including cancer osteoarthritis and autoimmune problems. The PUFAs, ω-6, and ω-3 fatty acids, which are found in both the marine and terrestrial environments, are given special attention. The primary goal is to evaluate the significant research papers in relation to the human health risks and benefits of ω-6 and ω-3 fatty acid dietary resources. This review article highlights the types of fatty acids, factors affecting the stability of polyunsaturated fatty acids, methods used for the mitigation of oxidative stability, health benefits of polyunsaturated fatty acids, and future perspectives in detail.

Sodium alginate emulsion loaded with linalool: Preparation, characterization and antibacterial mechanism against Shigella sonnei

This study aimed to prepare sodium alginate-linalool emulsion (SA-LE) to overcome the low solubility of linalool and explore its inhibitory activity against Shigella sonnei. The results indicated that linalool significantly reduced the interfacial tension between SA and oil phase (p < 0.05). Droplet sizes of fresh emulsions were uniform with sizes from 2.54 to 2.58 μm. The ζ-potential was between -23.94 and -25.03 mV, and the viscosity distribution was 973.62 to 981.03 mPa·s at pH 5-8 (near neutral pH) without significant difference. In addition, linalool could be effectively released from SA-LE in accordance with the Peppas-Sahlin model, mainly described by Fickian diffusion. In particular, SA-LE can inhibit S. sonnei with a minimum inhibitory concentration of 3 mL/L, which was lower than free linalool. The mechanism can be described as damaging the membrane structure and inhibiting respiratory metabolism accompanied by oxidative stress based on FESEM, SDH activity, ATP and ROS content. These results suggest that SA is an effective encapsulation strategy to enhance the stability of linalool and its inhibitory effect on S. sonnei at near neutral pH. Moreover, the prepared SA-LE has the potential to be developed as a natural antibacterial agent to address the growing food safety challenges.

Encapsulation of Menthol and Luteolin Using Hydrocolloids as Wall Material to Formulate Instant Aromatic Beverages

Aromatic plants represent about 0.7% of all medicinal plants. The most common are peppermint (main active ingredient: menthol) and chamomile (main active ingredient: luteolin), which are usually consumed in "tea bags" to make infusions or herbal teas. In this study, menthol and luteolin encapsulates using different hydrocolloids were obtained to replace the conventional preparation of these beverages. Encapsulation was carried out by feeding an infusion of peppermint and chamomile (83% aqueous phase = 75% water - 8% herbs in equal parts, and 17% dissolved solids = wall material in 2:1 ratio) into a spray dryer (180 °C-4 mL/min). A factorial experimental design was used to evaluate the effect of wall material on morphology (circularity and Feret's diameter) and texture properties of the powders using image analysis. Four formulations using different hydrocolloids were evaluated: (F1) maltodextrin-sodium caseinate (10 wt%), (F2) maltodextrin-soy protein (10 wt%), (F3) maltodextrin-sodium caseinate (15 wt%), and (F4) maltodextrin-soy protein (15 wt%). The moisture, solubility, bulk density, and bioavailability of menthol in the capsules were determined. The results showed that F1 and F2 presented the best combination of powder properties: higher circularity (0.927 ± 0.012, 0.926 ± 0.011), lower moisture (2.69 ± 0.53, 2.71 ± 0.21), adequate solubility (97.73 ± 0.76, 98.01 ± 0.50), and best texture properties. Those suggest the potential of these powders not only as an easy-to-consume and ecofriendly instant aromatic beverage but also as a functional one.

Enzymatic Janus Liposome Micromotors

A liposome-based micromotor system that utilizes regional enzymatic conversion and gas generation to achieve directional motion in water is presented. Constituted mainly of a low-melting lipid and a high-melting lipid together with cholesterol, these liposomes maintain stable Janus configuration at room temperature as a result of lipid liquid-liquid phase separation. Local placement of enzymes such as horseradish peroxidase is realized via affinity binding between avidin and biotin, the latter as a lipid conjugate sorted specifically into one domain of these Janus liposomes as a minor component. In the presence of the substrate, hydrogen peroxide, these enzyme-decorated Janus liposomes undergo directional motion, yielding velocities exceeding thermal diffusion by three folds in some cases. Experimental details on liposome size control, motor assembly, and substrate distribution are presented; effects of key experimental factors on liposome motion, such as substrate concentration and liposome Janus ratio, are also examined. This work thus provides a viable approach to building asymmetrical lipid-assembled, enzyme-attached colloids and, in addition, stresses the importance of asymmetry in achieving particle directional motion.

Encapsulation of Cumin (Cuminum cyminum L.) Seed Essential Oil in the Chickpea Protein-Maltodextrin Matrix

Isoelectrically precipitated chickpea protein isolate (CPI) and its combination with maltodextrin (MD) were investigated for the ability to form and stabilize cumin seed oil emulsions. Solubility, net surface charge, emulsion activity/stability indices, and creaming stability of CPI at a pH of 3.0-9.0 were evaluated. Optimum conditions for minimum cream separation were identified as: 0.19% CPI and 6.83% oil concentrations. Cumin (Cuminum cyminum L.) seed essential oil was microencapsulated within the CPI-MD matrix via spray drying. Effects of CPI-MD matrix formulation on the physicochemical characteristics and volatile composition of the microencapsules were investigated. CPI-MD matrices had positive effects on microcapsule properties such as relatively lower surface oil, higher encapsulation efficiency (EE), and oil retention. Approximately 86.6-96.4% oil retention and 90.9-98.4% EE were achieved. Optimum conditions for maximized oil retention (92.9%) and EE (98.6%) were identified as: 2.1% CPI, 14.8% essential oil, and 35% MD. GC-MS analysis of microcapsules was carried out to determine the changes in volatile composition during spray drying. Cymene, α-pinene, β-pinene, sabinene, terpinene, terpineol, phellandrene, and cumin aldehyde were determined as the major components. Optimized design showed the highest EE and minimal changes in the volatile composition of cumin seed essential oil.

Effects of citrus essential oils on the oxidative stability of microencapsulated fish oil by spray-drying

The effects of citrus essential oils (orange, lemon, mandarin, and grapefruit) on the oxidative stability of microencapsulated fish oil by spray-drying were evaluated. The encapsulation efficiency of microcapsules was in the range of 42.25 and 62.43%. Twelve active substances were determined as major volatile components of citrus essential oils. The highest phenolic content was obtained from grapefruit essential oil (44.32 mg GAE/g). Lower values of thiobarbituric acid reactive substances (TBARs) were obtained for microencapsulated fish oils with essential oils compared to control. At the end of storage, the highest peroxide value (PV) was observed in the control group (25.30 meq O₂/kg oil) while the lowest value was in the lemon (13.40 meq O₂/kg oil) and orange group (13.91 meq O₂/kg oil). The results of this study showed that citrus essential oils can be used to improve the oxidative stability of fish oil microcapsules.

Capsules templated from water-in-oil Pickering emulsions for enzyme encapsulation

HYPOTHESIS

Encapsulation of sensitive water-soluble bioactive materials such as fragrances, polyphenols and enzymes poses an immense challenge with capsules templated from water-in-oil (w/o) emulsions. Generation of radicals, heating, and extreme pH that are necessary for shell formation through interfacial reactions may have undesired influences on the active ingredients and thus lower their activity.

EXPERIMENTS

To overcome these limitations, we present a method to encapsulate sensitive ingredients, whereby capsules are templated from a w/o Pickering emulsion stabilized by binary particles of different hydrophilicity levels; the particles assembled at the water/oil interface are then crosslinked by polydiisocyanate (PHDI) at room temperature and neutral pH. Zein and casein nanoparticles were used as hydrophilic stabilizers and lipase was chosen as a model sensitive biomolecule that was encapsulated in the water core.

FINDINGS

Our results indicated that the enzymes encapsulated in colloid capsules had higher activity than those encapsulated in traditional w/o Pickering emulsion without shell crosslinking. The capsule structure effectively protected enzymes from the outer environment. This method is well suited for the encapsulation and protection of sensitive ingredients and shows great application in food, drug, and cosmetic industries.

Microencapsulation for Food Applications: A Review

Food products contain various active ingredients, such as flavors, nutrients, unsaturated fatty acids, color, probiotics, etc., that require protection during food processing and storage to preserve their quality and shelf life. This review provides an overview of standard microencapsulation technologies, processes, materials, industrial examples, reasons for market success, a summary of recent applications, and the challenges in the food industry, categorized by active food ingredients: flavors, polyunsaturated fatty acids, probiotics, antioxidants, colors, vitamins, and others. We also provide a comprehensive analysis of the advantages and disadvantages of the most common microencapsulation technologies in the food industry such as spray drying, coacervation, extrusion, and spray cooling. This review ends with future perspectives on microencapsulation for food applications.

Fecal microbiota transplantation: a review on current formulations in Clostridioides difficile infection and future outlooks

INTRODUCTION

The role of the gut microbiota in health and the pathogenesis of several diseases has been highlighted in recent years. Even though the precise mechanisms involving the microbiome in these ailments are still unclear, microbiota-modulating therapies have been developed. Fecal microbiota transplantation (FMT) has shown significant results against Clostridioides difficile infection (CDI), and its potential has been investigated for other diseases. Unfortunately, the technical aspects of the treatment make it difficult to implement. Pharmaceutical technology approaches to encapsulate microorganisms could play an important role in providing this treatment and render the treatment modalities easier to handle.

AREAS COVERED

After an overview of CDI, this narrative review aims to discuss the current formulations for FMT and specifically addresses the technical aspects of the treatment. This review also distinguishes itself by focusing on the hurdles and emphasizing the possible improvements using pharmaceutical technologies.

EXPERT OPINION

FMT is an efficient treatment for recurrent CDI. However, its standardization is overlooked. The approach of industrial and hospital preparations of FMT are different, but both show promise in their respective methodologies. Novel FMT formulations could enable further research on dysbiotic diseases in the future.

Arabinoxylan-Based Microcapsules Being Loaded with Bee Products as Bioactive Food Components Are Able to Modulate the Cell Migration and Inflammatory Response-In Vitro Study

The aim of the research was to use bioactive heteropolysaccharides isolated from rye bran to obtain innovative systems for the controlled release of bioactive compounds. The core of the obtained encapsulates was honey and royal jelly. It was shown for the first time that preparations effectively ameliorated inflammatory response in lipopolysaccharide (LPS)-treated RAW 264.7 macrophages, decreasing the secretion of interleukin 6 (IL-6), tumor necrosis factor α (TNF-α) and nitric oxide (NO). The in vitro digestion process revealed that bee products’ encapsulates were stronger oxidative stress reducers and had sustained ability to reduction in inflammation state mediators. The lack of inhibitory effect on migration rate of human microvascular endothelial cells (HMEC-1) endothelial cells and mouse embryonic fibroblasts (NIH-3T3), both cell models involved in wound healing process, additionally identified these preparations as agents potentially used in the management of inflammatory response. In the process of a simulated digestion in vitro, the innovative microcapsules showed 85% higher biostability and two to ten times better bioavailability, compared to natural bee products.

Preparation and Performance of Thickened Liquids for Patients with Konjac Glucomannan-Mediated Dysphagia

The present study sought to characterize the rheological and thickening properties of Konjac glucomannan (KGM) and prepare thickening components for special medical purposes using KGM and maltodextrin as the primary raw materials and guar gum (GG), xanthan gum (XG), locust bean gum (LBG), and carrageenan (KC) as the supplemented materials. The formulation and preparation processes were optimized through single factor experiments taking sensory evaluation as an indicator. The results confirm that KGM had excellent thickening performance, reaching about 90 times its own mass. The optimal formulation process of the thickening components based on KGM was as follows: the mass concentration of the compound thickener (KGM/GG/XG/LBG/KC = 13:2:2:2:1) was 5.0–7.0 mg/mL; the maltodextrin concentration was 10.0 mg/mL; the brewing temperature of the thickening component was 60 °C with no restriction on consumption time. The rheology test results revealed that the thickening components had shear thinning characteristics, which could provide three different thickening effects of nectar-thick level (350 mPa·s), honey-thick level (1250 mPa·s), and pudding-thick level (1810 mPa·s) suitable for people with different degrees of chewing disorders. Overall, this study provides a theoretical basis and technical reference for KGM as a dietary nutrition support for patients with dysphagia.

Polysaccharides as wall materials in spray-dried microencapsulation of bioactive compounds: Physicochemical properties and characterization

Natural bioactive compounds (BCs) are types of chemicals found in plants and certain foods that promote good health, however they are sensitive to processing and environmental conditions. Microencapsulation by spray drying is a widely used and cost-effective approach to create a coating layer to surround and protect BCs and control their release, enabling the production of high functional products/ingredients with extended shelf life. In this process, wall materials determine protection efficiency, and physical properties, bioavailability, and storage stability of microencapsulated products. Therefore, an understanding of physicochemical properties of wall materials is essential for the successful and effective spray-dried microencapsulation process. Typically, polysaccharide-based wall materials are generated from more sustainable sources and have a wider range of physicochemical properties and applications compared to their protein-based counterparts. In this review, we highlight the essential physicochemical properties of polysaccharide-based wall materials for spray-dried microencapsulation of BCs including solubility, thermal stability, and emulsifying properties, rheological and film forming properties. We provide further insight into possibilities for the chemical structure modification of native wall materials and their controlled release behaviors. Finally, we summarize the most recent studies involving polysaccharide biopolymers as wall materials and/or emulsifiers in spray-dried microencapsulation of BCs.

Molecular insight into the interactions between starch and cuminaldehyde using relaxation and 2D solid-state NMR spectroscopy

The interaction between cuminaldehyde and starch mainly governed the effect of further handling on food applications of cuminaldehyde. However, little information is available about the interactions of these components. We utilized relaxation and heteronuclear correlation (HETCOR) solid-state NMR spectroscopy to investigate the interaction between cuminaldehyde and porous starch at molecular level. We found that the interactions occurred mainly through hydrogen bonds. Cuminaldehyde molecules were restricted by starch, which resulted in the limitation of their movements and the longer ¹H T₁ relaxation time. Furthermore, the well resolved correlated peaks in 2D ¹H-¹³C HETCOR spectrum confirmed the formation of hydrogen bonds. The oxygen atoms at hydroxyl-2,3 of starch were the binding sites, which combined with hydrogens of cuminaldehyde. This present work not only afford a new approach to obtain a molecular understanding of interactions, but also expanded the application of solid-state NMR to investigation of the interaction on functional components.

Physicochemical and release behaviour of phytochemical compounds based on black jamun pulp extracts-filled alginate hydrogel beads through vibration dripping extrusion

The phytochemical-rich extract obtained from black jamun pulp were encapsulated using vibrating dripping extrusion technique. The utilisation of alginate (AL) with four variations of core-shell material comprising gum Arabic (AL-GA), guar gum (AL-GG), pectin (AL-P) and xanthan gum (AL-X) was engaged to form calcium-alginate based lyophilised jamun extract encapsulated beads. It resulted that among four variations, lyophilised alginate with AL-GG based encapsulated jamun extract filled beads have better physicochemical characteristics and 95% encapsulation efficiency. The results revealed the morphological comparison of each variation. The release behaviour of AL-GG based beads has a higher release of total phenolics (TPC) and total anthocyanin content (TAC). The release kinetics model involving Ritger-Peppas and Higuchi model were applied for release TPC and TAC of all variations of beads. The Ritger-Peppas model was found best suitable in terms of average R² (0.965) and lowest χ² (0.0039). The release kinetics study showed that AL-GA based beads followed by AL-GG could also be the best suitable in release behaviour using simulated gastrointestinal fluids at 140-160 min. Overall, results shown the encapsulated Jamun beads have the best agro-industrial efficacy in form of phytochemical compounds based microparticles, holding decent antioxidant potential.

A review of controlled release from cyclodextrins: release methods, release systems and application

The controlled release of guest molecules from cyclodextrin (CD) inclusion complexes is very important for specific industrial applications in foods, medicine, cosmetics, textiles, agriculture, environmental protection, and chemical materials. The term "controlled release" encompasses several related methods, including those referred to as immediate release, sustained release and targeted release. Many different CD-based controlled release systems are currently used in practical applications. CD inclusion complexes, CD coupling, supramolecular hydrogels, and supramolecular micelles are among the most common. This review systematically introduces the principles and applications of CD-based controlled release systems, providing a theoretical basis for improving the bioavailability of effective substances and broadening their range of application.

Advances in Controlled-Release Pesticide Formulations with Improved Efficacy and Targetability

Pesticides are commonly used in modern agriculture and are important for global food security. However, postapplication losses due to degradation, photolysis, evaporation, leaching, surface runoff, and other processes may substantially reduce their efficacy. Controlled-release formulations can achieve the permeation-regulated transfer of an active ingredient from a reservoir to a target surface. Thus, they can maintain an active ingredient at a predetermined concentration for a specified period. This can reduce degradation and dissipation and other losses and has the potential to improve efficacy. Recent developments in controlled-release technology have adapted the concepts of intelligence and precision from the pharmaceutical industry. In this review, we present recent advances in the development of controlled-release formulations and discuss details of the preparation methods, material improvements, and application technologies.

Microbial cell factories a new dimension in bio-nanotechnology: exploring the robustness of nature

Bio-based nanotechnology has its existence in biological dimensions e.g. microbial cell factories (bacteria, fungi. algae, yeast, cyanobacteria) plants, and biopolymers. They provide multipurpose biological platforms to supply well-designed materials for diverse nano-biotechnological applications. The "green or bio-based synthesis of nanoparticles (NPs)" has witnessed a research outburst in the past decade. The bio-based synthesis of NPs using microbial cell factories is a benign process and requires mild conditions for the synthesis with end products being less/non-toxic. As a result, its application has extended in multitudinous industries including environment, cosmetics, and pharmaceutical. Thus, the present review summarizes all the significant aspects of nanotechnology and the reason to switch towards the bio-based synthesis of NPs using microbial cell factories. It consists of a detailed description of the bio-based methods employed for the synthesis and classification of NPs. Also, a comprehensive study on the application of bio-based NPs in the various industrial and biotechnological domains has been discussed. The limitation and its solution would help identify the applicability of NPs to "identified and unidentified" sectors.

Microencapsulation of carotenoid-rich materials: A review

Carotenoids are natural pigments that present several bioactive properties, including antioxidant, anticarcinogenic and provitamin A activities. However, these compounds are susceptible to degradation when exposed to a number of conditions (e.g. light, heat, oxygen), leading to loss of benefits and hampering their application in food products. Their hydrophobicity also makes incorporation into water-based foods more difficult. Microencapsulation techniques have been applied for decades to provide stability to carotenoid-rich extracts under typical conditions of processing and storage of foods, besides offering several other advantages to the use and application of these materials. This work reviews the recent advances in the microencapsulation of carotenoid-rich extracts, oils and oleoresins from varying sources, evidencing the technologies applied to encapsulate these materials, the effects of encapsulation on the obtained particles, and the impact of such processes on the bioaccessibility and release profile of carotenoids from microparticles. Moreover, recent applications of carotenoid-rich microparticles in food products are discussed. Most of the applied processes were effective in improving different aspects of the encapsulated materials, especially the stability of carotenoids during storage, resulting in microparticles with promising properties for future applications in food products. However, the lack of information about the effects of microencapsulation on carotenoids during processing of model foods, the sensory acceptance of enriched food products and the bioaccessibility and bioavailability of microencapsulated carotenoids reveals gaps that should be explored in the future.

Beetroot Microencapsulation with Pea Protein Using Spray Drying: Physicochemical, Structural and Functional Properties

Beetroot is a root vegetable with carotenoids, phenols, vitamins, minerals, and water-soluble betalain pigments such as betacyanins (red-violet color) and betaxanthins (yellow-orange color), which have many nutritional and health benefits. Its use in the food industry is mainly as a powdered natural dye. This study aims to investigate the effect of adding pea protein to beetroot juice as an encapsulating agent, and the spray-dried temperature on the physicochemical, structural, and functional properties of the powder. The spray drying was conducted at 125 and 150 °C with 3.5% and 7% pea protein used in the mixtures with the beetroot juice. The water content, bulk density, porosity, hygroscopicity, water solubility, water absorption index, color, and microstructure of the obtained powder were determined. In addition, betacyanin, total phenols, antioxidant capacity, and powder encapsulate efficiency were analyzed. Using pea protein in the spray drying of beetroot juice had shown high yields of spray drying and good characteristics of the powdered product. Beetroot powder with 7% of pea protein was more porous and luminous, and less hygroscopic than beetroot powder with 3.5% of pea protein. However, the use of 7% of pea protein increased the amount of water immobilized by the samples and reduced the soluble solids present in the product compared to beetroot powder with 3.5% of pea protein. The use of 7% of pea protein protected beetroot bioactive compound higher than the use of 3.5%. Higher spray-drying temperature (150 °C) significantly decreased phenols content and antioxidant capacity of the beetroot powders (p < 0.05). Results showed using 7% pea protein mixed with beetroot juice and a 125 °C spray-drying temperature gave the most content of the studied bioactive compounds and antioxidant capacity. Moreover, the proposal gives more stable powders from a functionality viewpoint because it showed the higher encapsulate efficiency.

A Review of the Extraction and Closed-Loop Spray Drying-Assisted Micro-Encapsulation of Algal Lutein for Functional Food Delivery

In this study, the physical and chemical properties and bioavailability of lutein have been summarized, with the novelty of this work being the review of lutein from production to extraction, through to preservation and drying, in order to deliver a functional food ingredient. The potential health functions of lutein have been introduced in detail. By comparing algae and marigold flowers, the advantages of algae extraction technology have been discussed. In this article, we have introduced the use of closed-loop spray drying technology to microencapsulate lutein to improve its stability and solubility. Microencapsulation of unstable substances by spray drying is a potentially useful direction that is worth exploring further.

Subacute and subchronic toxicity of microencapsulated pomegranate juice in rats and mice

Pomegranate (Punica granatum L.) is a fruit used extensively in traditional medicine by ancient and modern cultures. Different parts of the tree and fruit, such as leaf, peel, pericarp, aril, seed, and juice contain considerable amounts of phenolic compounds with high antioxidant activities. To improve its storability, pomegranate juice was microencapsulated by spray drying. The present study evaluated microencapsulated pomegranate juice (MPJ) for toxic effects in Wistar rats and CD-1 mice to determine if MPJ can be considered safe for human consumption and used as a nutraceutical. No deaths or deleterious effects occurred when high doses of 5000 mg/kg were orally administered in rats for 14 days, indicating an absence of subacute toxicity. Similarly, 3000 mg/kg MPJ administered to CD-1 mice for 90 days did not show subchronic toxicity. In fact, MPJ resulted in lowered weight gain in both rats and mice. Cytotoxic and microbiological analyses of MPJ were also performed. MPJ did not cause any cytotoxicity in epithelial cell culture as tested using the Alamar blue assay. Additionally, histopathological analysis of kidney and liver corroborated the absence of toxicity in CD-1 mice. The microbial load of the MPJ was low, and no pathogenic bacteria were present. In conclusion, the results reported here show that high doses of MPJ are apparently innocuous in rats and mice for the 14 and 90 days investigated, respectively. Although preliminary, our results suggest that MPJ may be safe to ingest and may even have beneficial effects in reducing weight gain.