Advances in sample preparation in chromatography for organic environmental pollutants analyses

Dispersive solid phase extraction of imatinib from human plasma using biological metal-organic and covalent-organic framework composite prior to HPLC-MS/MS

In this study, a dispersive solid-phase extraction method was developed using a metal organic framework and covalent organic framework composite for the efficient extraction of imatinib from human plasma before its determination by a high-performance liquid chromatography-tandem mass spectrometry detector. The composite was synthesized using cobalt chloride and nicotinic acid through a hydrothermal method, while the covalent organic framework was prepared from benzidine and terephthalaldehyde and deposited onto the metal organic framework. The synthesized adsorbent was characterized using Fourier transform infrared spectroscopy, X-ray diffraction, and scanning electron microscopy (SEM), confirming its successful formation and structural properties. The method exhibited limits of detection of 1.1 ng mL-1 in plasma and 0.67 ng mL-1 in deionized water, quantification of 3.7 ng mL-1 in plasma and 2.2 ng mL-1 in deionized water, a linear range of 3.7-500 ng mL-1 in plasma and 2.2-500 ng mL-1 in deionized water, and an extraction recovery of 59 % demonstrating the method's suitability for reliable and precise quantification of imatinib in biological and aqueous matrices. The method's precision was investigated by evaluating the relative standard deviation and it was found to be ≤6.6 %.

Dispersive solid phase extraction of apixaban from human plasma samples prior to capillary electrophoresis determination using zirconium-based metal organic frameworks prepared by different modulator and solvent

Here, a zirconium-based metal organic framework-dispersive solid phase extraction method was established as an efficient, robust, and accurate approach for quantifying apixabanin human plasma samples prior to capillary electrophoresis with diode array detection. Various types of metal organic frameworks based on UiO-66-NH2 were synthesized by altering modulators and solvents and applied as sorbents in the extraction procedure. Among the tested sorbents, UiO-66-NH2 prepared in dimethylformamide in the presence of acetic acid was found to be the best sorbent in this method for the extraction of apixaban with high extraction efficiency comparable to other types of UiO-66-NH2 metal organic frameworks. The extraction and preconcentration of apixaban were carried out by adding 5 mg of synthesized sorbent to a 5 mL sample solution, followed by vortexing for 3 min. After discarding the supernatant, the adsorbed analyte was eluted from the sorbent surface using 60 µL acetonitrile under vortexing for 2 min. The effective parameters of the offered method were optimized and validated using a one-parameter-at-a- time strategy. The detection and quantification limits of the method were 9.9 and 32 ng mL-1 in plasma and 1.5 and 4.9 ng mL-1 in deionized water, respectively. The method was linear ranging from 4.9 to 1000 ng mL-1 in deionized water and from 32 to 500 ng mL-1 in plasma, respectively. The enrichment factor and extraction recovery values were 44 % and 53 %, respectively. The relative standard deviations were ≤6.2 % for intra- and inter-day precisions. Finally, the proposed method was successfully employed to quantify apixaban in human plasma samples.

Heteroatom cobalt-based metal-organic framework and reduced graphene oxide nanocomposite for dispersive solid phase extraction of caffeine from exhaled breath condensate samples of premature infants prior to HPLC-PDA

A cobalt-based metal-organic framework and graphene oxide were combined to prepare a new nanocomposite for extracting of caffeine from exhaled breath condensate (EBC) samples. Dispersive micro solid phase extraction of caffeine was conducted using the nanocomposite as a sorbent by adding 10 mg of it to the sample solution and vortexing for 3 min. After extracting of the analyte, it was eluted using the mobile phase. The analyte was then analyzed using high performance liquid chromatography-photodiode array detector. Under optimal conditions, the limit of detection, limit of quantification, and linear range of the calibration curve were found to be 1.7, 5.9, and 10-500 µg/L, respectively. To assess the precision of the method, five replicates of standard solutions containing caffeine at two different concentration levels (50 and 100 µg/L) were tested. The relative standard deviations for intra- and inter-day precisions ranged from 4.3 to 6.8 %. The applicability of the method was demonstrated by analyzing the samples obtained from premature infants undergoing caffeine treatment and caffeine concentrations were 4.9 ± 0.6, 2.7 ± 0.2 µg/L in the EBC samples of who were under treatment by a 5-mg dose. Also, caffeine concentrations were 5.9 ± 0.3 and 18 ± 0.6 µg/L in the the infants who obtained the 10-mg and 25-mg doses, respectively. The results indicated a satisfactory, extraction recovery of 86 % showcasing the method's reliability and effectiveness in analyzing real samples.

Novel ultrasound assisted extraction and d-SPE clean-up for the analysis of multiple legacy and emerging organic contaminants in edible fish

Polychlorinated biphenyls (PCBs), polybrominated diphenyl ethers (PBDEs), novel brominated flame retardants (NBFRs), phthalate esters (PAEs) are pervasive environmental pollutants, posing threats to both ecosystems and human health. Although several analytical methods were developed for these compounds, they are not performed simultaneously. This study addresses the need for a sustainable, novel, analytical approach capable of simultaneously determining these diverse chemical classes in edible fish muscles. Employing ultrasound extraction coupled with dispersive solid-phase extraction (d-SPE) as a cleanup procedure, the method was compared to conventional techniques, revealing significant improvements. Analytical parameters were thoroughly assessed, and the innovative method demonstrated notable advantages, reducing extraction and purification times by approximately 74-80 % and solvent consumption by around 94-97 %. Applied to Mediterranean Sea fish samples, the results underscore the method's potential as a viable, sustainable alternative to traditional approaches, promising enhanced efficiency and reduced environmental impact.

Development of dispersive solid phase extraction based on magnetic metal organic framework for the extraction of sunitinib in biological samples and its determination by high performance liquid chromatography-tandem mass spectrometry

Herein, a simple, sensitive, and reliable dispersive solid phase extraction was reported for the efficient extraction of sunitinib from biological samples. To facilitate the extraction of the desired analyte from urine and plasma samples, magnetic MIL-101Cr (NH2) @SiO2 @ NiFe2O4 was synthesized by a hydrothermal method and applied as an effective sorbent during the extraction process. After adsorption of the drug using 10 mg of MIL-101Cr (NH2) @ SiO2 @ NiFe2O4 nanoparticles through vortexing (1 min), the sorbent was separatedfrom the sample solution using a magnet. To eluate the drug, the sorbent containing the sunitinib was contacted with 100 µL dimethylformamide. The eluent was analyzed by high performance liquid chromatography-tandem mass spectrometry. Reasonable validation data consisting of low limits of detection (0.14, 0.35, and 0.70 ng mL-1 in deionized water, plasma, and urine) and quantification (0.48, 1.2, and 2.4 ng mL-1 in deionized water, plasma, and urine, respectively), a wide linear range of the calibration curve (0.48-200, 1.2-200, and 2.4-100 ng mL-1 in deionized water, plasma, and urine, respectively) good extraction recovery (76 %), and low relative standard deviations for inter- and intra-day precisions (6.9 %) were obtained by the method. Eventually, the proposed procedure was effectively implemented on both plasma and urine samples, yielding successful outcomes.

Development of a new continuous homogenous liquid phase microextraction procedure based on in-situ preparation of deep eutectic solvent; application in the analysis of aliphatic amines in urine samples by GC-MS

In the present work, a new microextraction procedure combined with gas chromatography-mass spectrometry has been developed for the analysis of several aliphatic amines from urine sample. The sample preparation method was a continuous homogenous liquid phase microextraction that was based on in-situ preparation of 4-chlorophenol: choline chloride deep eutectic solvent. The deep eutectic solvent was prepared by passing the mixture of related compounds through a syringe barrel filled with exothermic salts (calcium chloride and potassium bromide). The released heat by dissolving the salts and increasing the solution ionic strength assists the formation of the deep eutectic solvent. The influence of various factors on the efficiency of the proposed procedure including salts amount, flow rate, pH, salting-out effect, and extraction solvent volume was studied. The calibration curves were linear broadly over the concentration range of 1.2-250 ng mL-1 with coefficient of determinations ≥0.996. The enrichment factors were in the range of 188-246 and the limits of detection and quantification were 0.16-0.37 and 0.56-1.2 ng mL-1, respectively. Based on the results, the offered method was sensitive, rapid, eco-friendly, and efficient for extracting and determining aliphatic amines in urine samples.

Preparation of magnetic amphiphilic resin microspheres via the one-step polymerization method and extraction of four glucocorticoids for HPLC-MS analysis

Amphiphilic materials can be used for sample preparation of chromatography or mass spectrometry. Amphiphilic materials with magnetic properties in combination with magnetic suction devices allow for automated sample preparation. However, conventional synthesis methods are cumbersome and not suitable for the mass production of the material. In this study, a micro-suspension polymerization method was developed to synthesize magnetic amphiphilic resin microspheres (MARMs), providing new ideas for the preparation of amphiphilic microspheres. MARMs with particle sizes ranging from 3 to 6 μm were successfully prepared, with BET surface area up to 653.2 m2/g. A magnetic solid-phase extraction method based on MARM-5 was developed for the extraction of four glucocorticoids including Cortisone, Hydrocortisone, Cortodoxone, and Corticosterone. This method had a very short adsorption time of 0.5 min and a total extraction time of only 13 min. The limit of detection for the four glucocorticoids ranged from 0.22 to 0.82 ng/L. There was a good linear relationship between sample concentration and peak area in the range of 25∼500 ng/L. Relative recovery of 98 %∼108 % and internal standard normalized matrix effect factors of 95∼114 % were obtained, and the relative standard deviation was between 2.3 % and 6.3 %. The MARMs would be used as excellent solid extraction material for glucocorticoids.

Extraction and analysis by liquid chromatography - tandem mass spectrometry of intra- and extracellular microcystins and nodularin to study the fate of cyanobacteria and cyanotoxins across the freshwater-marine continuum

The presence of microcystins (MCs) is increasingly being reported in coastal areas worldwide. To provide reliable data regarding this emerging concern, reproducible and accurate methods are required to quantify MCs in salt-containing samples. Herein, we characterized methods of extraction and analysis by liquid chromatography coupled to tandem mass spectrometry (LC-MS/MS) for nine MCs and one nodularin (NOD) variants in both cyanobacteria (intracellular) and dissolved forms (extracellular). Different approaches have been used to cope with salinity for the extraction of dissolved MCs but none assessed solid phase extraction (SPE) so far. It was found that salt had negligible effect on the SPE recovery of dissolved MCs using the C18 cartridge while an overestimation up to 67% was noted for some variants with a polymeric sorbent. The limits of detection (LOD) and quantification (LOQ) were 1.0-22 and 5.5-124 pg on column for the intracellular toxins, while 0.05-0.81 and 0.13-2.4 ng/mL were obtained for dissolved toxins. Extraction recoveries were excellent for intracellular (89-121%) and good to excellent for extracellular cyanotoxins (73-102%) while matrix effects were considered neglectable (<12% for 16/20 toxin-matrix combinations), except for the two MC-RR variants. The strategy based on the application of a corrective factor to compensate for losses proved useful as the accuracy was satisfactory (73-117% for intra- and 81-139% for extracellular cyanotoxins, bias <10% for 46/60 conditions, with a few exceptions), with acceptable precisions (intra- and inter-days variabilities <11%). We then applied this method on natural colonies of Microcystis spp. subjected to a salt shock, mimicking their estuarine transfer, in order to assess their survival and to quantify their toxins. The colonies of Microcystis spp. had both their growth and photosynthetic activity impaired at salinities from 10, while toxins remained mainly intracellular (>76%) even at salinity 20, suggesting a potential health risk and contamination of estuarine organisms.

Modern automated microextraction procedures for bioanalytical, environmental, and food analyses

Sample preparation frequently is considered the most critical stage of the analytical workflow. It affects the analytical throughput and costs; moreover, it is the primary source of error and possible sample contamination. To increase efficiency, productivity, and reliability, while minimizing costs and environmental impacts, miniaturization and automation of sample preparation are necessary. Nowadays, several types of liquid-phase and solid-phase microextractions are available, as well as different automatization strategies. Thus, this review summarizes recent developments in automated microextractions coupled with liquid chromatography, from 2016 to 2022. Therefore, outstanding technologies and their main outcomes, as well as miniaturization and automation of sample preparation, are critically analyzed. Focus is given to main microextraction automation strategies, such as flow techniques, robotic systems, and column-switching approaches, reviewing their applications to the determination of small organic molecules in biological, environmental, and food/beverage samples.

Developments of Microextraction (Extraction) Procedures for Sample Preparation of Antidepressants in Biological and Water Samples, a Review

Antidepressants are an important class of drugs to treat various types of depression. The determination of antidepressants is crucial in biological samples to control adverse effects in humans and study pharmacokinetics and bioavailability. Direct measurement of antidepressants in biological and water samples is a considerable challenge for analysts due to their low concentration, the high matrix effects of real samples, and the presence of metabolites of these drugs in biological samples. The challenge leads to using sample preparation processes as a critical step in determining antidepressants. Extraction and microextraction procedures have been widely utilized as sample preparation procedures for these drugs. The purposes of extraction or microextraction methods for antidepressant medications are to preconcentrate the analyte, reduce the matrix effects, increase the selectivity of the procedures, and convert the sample to a suitable format for introducing it into detection systems. In the review, the various extraction and microextraction methods of these drugs in biological, real water, and wastewater samples were investigated. The theory of each technique was briefly addressed to understand the features and factors affecting each method. The extraction and microextraction methods were classified based on their application for antidepressants, and the advantages and disadvantages of each technique were reviewed. The new developments to overcome the limitations of each procedure were discussed. The investigation indicated the number of applications of liquid-phase microextraction for extracting antidepressants has been almost equal to that of solid-phase microextraction.

Trace determination of antifungal drugs in biological fluids through a developed approach of hydrogel-based spin-column micro-solid-phase extraction followed by LC-MS/MS analysis

In the present research, a blended polyacrylamide-chitosan hydrogel was synthesized. For the first time, the prepared sorbent was efficiently employed in a hydrogel-based spin-column setup as a promising format. The proposed method was applied for monitoring the trace amounts of ketoconazole, clotrimazole, and miconazole in blood samples. Effective adsorption and desorption parameters were optimized using a central composite design and the one-variable-at-a-time method. Under the optimal conditions, the calibration curves were linear in the range of 15.0-1000.0, 1.0-1000.0, and 2.0-1000.0 ng mL^-1 for ketoconazole, clotrimazole, and miconazole, respectively, along with intra- and interday precision less than 8.4%. Limits of detection were obtained between 0.2 and 5.0 ng mL^-1 . The preconcentration factors were found in the range of 5.9-7.8. The introduced method was successfully applied for micro-solid-phase extraction of trace amounts of target antifungal drugs in blood samples, followed by liquid chromatography-tandem mass spectrometry. Satisfactory relative recoveries of 94.5-103.5% were obtained, implying method reliability. Overall, the proposed method provides good accuracy and repeatability, high reusability, and good applicability to determine antifungal drugs in complex biological matrices.

Chitosan biofilms: Insights for the selective electromembrane extraction of fluoroquinolones from biological samples

A selective electromembrane extraction procedure for the extraction of Enrofloxacin, Marbofloxacin and Flumequine, usually employed as antibiotic in veterinarian use, is proposed by using a chitosan biofilm, composed by 60% (w/w) chitosan and 40% (w/w) Aliquat®336, as active biopolymeric support. The interaction mechanism occurring between the target drugs and the biopolymer has been deeply studied using the Quantum Theory of Atoms in Molecules. The obtained results show the interaction between the extracted fluoroquinolones and the biomembrane is stabilized by two hydrogen bonds formed between both the carboxyl and keto groups of the drugs with both the amine and hydroxyl groups of glucosamine in the biopolymer. The energetic results agree with the high extraction efficiency obtained for Marbofloxacin, Enrofloxacin and Flumequine in terms of enrichment factors (83, 82 and 58, respectively) in presence of other fluoroquinolones. Under optimum conditions, the proposed electromembrane extraction method exhibits wide linear ranges of 4.2-200 μg L^-1, 5.6-200 μg L^-1 and 5.1-200 μg L^-1, respectively; low limits of detection close to 1.3 μg L^-1 and appropriate repeatability (relative standard deviation values 4-7%).

Overview of Sample Preparation and Chromatographic Methods to Analysis Pharmaceutical Active Compounds in Waters Matrices

In the environment, pharmaceutical residues are a field of particular interest due to the adverse effects to either human health or aquatic and soil environment. Because of the diversity of these compounds, at least 3000 substances were identified and categorized into 49 different therapeutic classes, and several actions are urgently required at multiple steps, the main ones: (i) occurrence studies of pharmaceutical active compounds (PhACs) in the water cycle; (ii) the analysis of the potential impact of their introduction into the aquatic environment; (iii) the removal/degradation of the pharmaceutical compounds; and, (iv) the development of more sensible and selective analytical methods to their monitorization. This review aims to present the current state-of-the-art sample preparation methods and chromatographic analysis applied to the study of PhACs in water matrices by pinpointing their advantages and drawbacks. Because it is almost impossible to be comprehensive in all PhACs, instruments, extraction techniques, and applications, this overview focuses on works that were published in the last ten years, mainly those applicable to water matrices.