Formulations for intermittent release of parathyroid hormone (1-34) and local enhancement of osteoblast activities

Current and future directions of drug delivery for the treatment of mental illnesses

Mental illnesses including anxiety disorders, autism spectrum disorder, post-traumatic stress disorder, schizophrenia, depression, and others exact an immense toll on the healthcare system and society at large. Depression alone impacts 21 million adults and costs over $200 billion annually in the United States. However, pharmaceutical strategies to treat mental illnesses are lagging behind drug development in many other disease areas. Because many of the shortcomings of therapeutics for mental illness relate to delivery problems, drug delivery technologies have the potential to radically improve the effectiveness of therapeutics for these diseases. This review describes the current pharmacotherapeutic approaches to treating mental illnesses as well as drug delivery approaches that have improved existing therapies. Approaches to improve drug bioavailability, provide controlled release of therapeutics, and enable drug targeting to the central nervous system (CNS) will be highlighted. Moreover, next-generation delivery approaches such as environmentally-controlled release and interval/sequential drug release will be addressed. Based on the evolving landscape of the treatment of mental illnesses, the nascent field of drug delivery in mental health has tremendous potential for growth in terms of both economic and patient impact.

Interval delivery of 5HT2A agonists using multilayered polymer films

There is an urgent unmet medical need to develop therapeutic options for the ~50% of depression patients suffering from treatment-resistant depression, which is difficult to treat with existing psycho- and pharmaco-therapeutic options. Classical psychedelics, such as the 5HT2A agonists, have re-emerged as a treatment paradigm for depression. Recent clinical trials highlight the potential effectiveness of 5HT2A agonists to improve mood and psychotherapeutic growth in treatment-resistant depression patients, even in those who have failed a median of four previous medications in their lifetime. Moreover, microdosing could be a promising way to achieve long-term alleviation of depression symptoms without a hallucinogenic experience. However, there are a gamut of practical barriers that stymie further investigation of microdosing 5HT2A agonists, including: low compliance with the complicated dosing regimen, high risk of diversion of controlled substances, and difficulty and cost administering the long-term treatment regimens in controlled settings. Here, we developed a drug delivery system composed of multilayered cellulose acetate phthalate (CAP)/Pluronic F-127 (P) films for the encapsulation and interval delivery of 5HT2A agonists from a fully biodegradable and biocompatible implant. CAPP film composition, thickness, and layering strategies were optimized, and we demonstrated three distinct pulses from the multilayered CAPP films in vitro. Additionally, the pharmacokinetics and biodistribution of the 5HT2A agonist 2,5-Dimethoxy-4-iodoamphetamine (DOI) were quantified following the subcutaneous implantation of DOI-loaded single and multilayered CAPP films. Our results demonstrate, for the first time, the interval delivery of psychedelics from an implantable drug delivery system and open the door to future studies into the therapeutic potential of psychedelic delivery.

Impact of Release Kinetics on Efficacy of Locally Delivered Parathyroid Hormone for Bone Regeneration Applications

Characterizing the release profile for materials-directed local delivery of bioactive molecules and its effect on bone regeneration is an important step to improve our understanding of, and ability to optimize, the bone healing response. This study examined the local delivery of parathyroid hormone (PTH) using a thiol-ene hydrogel embedded in a porous poly(propylene fumarate) (PPF) scaffold for bone regeneration applications. The aim of this study was to characterize the degradation-controlled in vitro release kinetics of PTH from the thiol-ene hydrogels, in vivo hydrogel degradation in a subcutaneous implant model, and bone healing in a rat critical size bone defect. Tethering PTH to the hydrogel matrix eliminated the early timepoint burst release that was observed in previous in vitro work where PTH was free to diffuse out of the matrix. Only 8% of the tethered PTH was released from the hydrogel during the first 2 weeks, but by day 21, 80% of the PTH was released, and complete release was achieved by day 28. In vivo implantation revealed that complete degradation of the hydrogel alone occurred by day 21; however, when incorporated in a three-dimensional printed osteoconductive PPF scaffold, the hydrogel persisted for >56 days. Treatment of bone defects with the composite thiol-ene hydrogel-PPF scaffold, delivering either 3 or 10 μg of tethered PTH 1-84, was found to increase bridging of critical size bone defects, whereas treatment with 30 μg of tethered PTH resulted in less bone ingrowth into the defect area. Continued development of this biomaterial delivery system for PTH could lead to improved therapies for treatment of nonunion fractures and critical size bone defects.

Parathyroid hormone for bone regeneration

Delayed healing and/or non-union occur in approximately 5-10% of the fractures that occur annually in the United States. Segmental bone loss increases the probability of non-union. Though grafting can be an effective treatment for segmental bone loss, autografting is limited for large defects since a limited amount of bone is available for harvest. Parathyroid hormone (PTH) is a key regulator of calcium homeostasis in the body and plays an important role in bone metabolism. Presently PTH is FDA approved for use as an anabolic treatment for osteoporosis. The anabolic effect PTH has on bone has led to research on its use for bone regeneration applications. Numerous studies in animal models have indicated enhanced fracture healing as a result of once daily injections of PTH. Similarly, in a human case study, non-union persisted despite treatment attempts with internal fixation, external fixation, and autograft in combination with BMP-7, until off label use of PTH1-84 was utilized. Use of a biomaterial scaffold to locally deliver PTH to a defect site has also been shown to improve bone formation and healing around dental implants in dogs and drill defects in sheep. Thus, PTH may be used to promote bone regeneration and provide an alternative to autograft and BMP for the treatment of large segmental defects and non-unions. This review briefly summarizes the unmet clinical need for improved bone regeneration techniques and how PTH may help fill that void by both systemically and locally delivered PTH for bone regeneration applications. © 2018 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 36:2586-2594, 2018.

Synergistic local drug delivery in a piglet model of ischemic osteonecrosis: a preliminary study

A locally injectable system sequentially delivering an antiresorptive drug (clodronate) followed by an osteogenic agent (simvastatin) was hypothesized to improve femoral head microarchitecture, size, and shape compared with untreated or partial treatment groups in an established piglet osteonecrosis model. After 6 weeks, the clodronate+simvastatin treatment resulted in no collapse, microCT measurements and epiphyseal quotients within 10% of control, normal microstructure, and healthy histology. All other groups exhibited collapse, lower epiphyseal quotients and total femoral head volumes (P<0.05), and abnormal histology. This pilot study provides evidence of synergistic antiresorptive and osteogenic activities, which may prevent femoral head collapse in Perthes disease.

Thymoquinone prevents RANKL-induced osteoclastogenesis activation and osteolysis in an in vivo model of inflammation by suppressing NF-KB and MAPK Signalling

Osteoclasts are multinuclear giant cells responsible for bone resorption in inflammatory bone diseases such as osteoporosis, rheumatoid arthritis and periodontitis. Because of deleterious side effects with currently available drugs the search continues for novel effective and safe therapies. Thymoquinone (TQ), the major bioactive component of Nigella sativa has been investigated for its anti-inflammatory, antioxidant and anticancer activities. However, its effects in osteoclastogenesis have not been reported. In the present study we show for the first time that TQ inhibits nuclear factor-KB ligand (RANKL) induced osteoclastogenesis in RAW 264.7 and primary bone marrow derived macrophages (BMMs) cells. RANKL induced osteoclastogenesis is associated with increased expression of multiple transcription factors via activation of NF-KB, MAPKs signalling and reactive oxygen species (ROS). Mechanistically TQ blocked the RANKL induced NF-KB activation by attenuating the phosphorylation of IkB kinase (IKKα/β). Interestingly, in RAW 264.7 cells TQ inhibited the RANKL induced phosphorylation of MAPKs and mRNA expression of osteoclastic specific genes such as TRAP, DC-STAMP, NFATc1 and c-Fos. In addition, TQ also decreased the RANKL stimulated ROS generation in macropahges (RAW 264.7) and H2O2 induced ROS generation in osteoblasts (MC-3T3-E1). Consistent with in vitro results, TQ inhibited lipopolysaccharide (LPS) induced bone resorption by suppressing the osteoclastogenesis. Indeed, micro-CT analysis showed that bone mineral density (BMD) and bone architecture parameters were positively modulated by TQ. Taken together our data demonstrate that TQ has antiosteoclastogenic effect by inhibiting inflammation induced activation of MAPKs, NF-KB and ROS generation followed by suppressing the gene expression of c-Fos and NFATc1 in osteoclast precursors.

Local drug delivery for enhancing fracture healing in osteoporotic bone

Fragility fractures can cause significant morbidity and mortality in patients with osteoporosis and inflict a considerable medical and socioeconomic burden. Moreover, treatment of an osteoporotic fracture is challenging due to the decreased strength of the surrounding bone and suboptimal healing capacity, predisposing both to fixation failure and non-union. Whereas a systemic osteoporosis treatment acts slowly, local release of osteogenic agents in osteoporotic fracture would act rapidly to increase bone strength and quality, as well as to reduce the bone healing period and prevent development of a problematic non-union. The identification of agents with potential to stimulate bone formation and improve implant fixation strength in osteoporotic bone has raised hope for the fast augmentation of osteoporotic fractures. Stimulation of bone formation by local delivery of growth factors is an approach already in clinical use for the treatment of non-unions, and could be utilized for osteoporotic fractures as well. Small molecules have also gained ground as stable and inexpensive compounds to enhance bone formation and tackle osteoporosis. The aim of this paper is to present the state of the art on local drug delivery in osteoporotic fractures. Advantages, disadvantages and underlying molecular mechanisms of different active species for local bone healing in osteoporotic bone are discussed. This review also identifies promising new candidate molecules and innovative approaches for the local drug delivery in osteoporotic bone.

The effects of excipients and particle engineering on the biophysical stability and aerosol performance of parathyroid hormone (1-34) prepared as a dry powder for inhalation

Pulmonary delivery of therapeutic peptides and proteins has many advantages including high relative bioavailability, rapid systemic absorption and onset of action and a non-invasive mode of administration which improves patient compliance. In this study, we investigated the effect of spray-drying (SD) and spray freeze-drying processes on the stability and aerosol performance of parathyroid hormone (PTH) (1-34) microparticles. In this study, the stabilisation effect of trehalose (a non-reducing sugar) and Brij 97 (a non-ionic surfactant) on spray-dried PTH particles was assessed using analytical techniques including circular dichroism (CD), fluorescence spectroscopy, modulated differential scanning calorimetry and an in vitro bioactivity assay. Physical characterisation also included electron microscopy, tap density measurement and laser light diffraction. The aerosol aerodynamic performance of the formulations was assessed using the Andersen cascade impactor. Based on these studies, a formulation for spray freeze-drying was selected and the effects of the two particle engineering techniques on the biophysical stability and aerosol performance of the resulting powders was determined. CD, fluorescence spectroscopy and bioactivity data suggest that trehalose when used alone as a stabilising excipient produces a superior stabilising effect than when used in combination with a non-ionic surfactant. This highlights the utility of CD and fluorescence spectroscopy studies for the prediction of protein bioactivity post-processing. Therefore, a method and formulation suitable for the preparation of PTH as a dry powder was developed based on spray-drying PTH with trehalose as a stabiliser with the bioactivity of SD PTH containing trehalose being equivalent to that of unprocessed PTH.

Alternating release of different bioactive molecules from a complexation polymer system

Regeneration of bone is driven by the action of numerous biomolecules. However, most osteobiologic devices mainly depend on delivery of a single molecule. The present studies were directed at investigating a polymeric system that enables localized, alternating delivery of two or more biomolecules. The osteotropic biomolecules studied were simvastatin hydroxyacid (Sim) and parathyroid hormone (1-34) (PTH(1-34)), and the antimicrobial peptide cecropin B (CB) was also incorporated. Loaded microspheres were made using the complexation polymer system of cellulose acetate phthalate and Pluronic F-127 (blend ratio, 7:3). By alternating layers of the different types of microspheres, 10-layer devices were made to release CB and Sim, CB and PTH, or Sim and PTH. In vitro experiments showed five discrete peaks for each molecule over a release period of approximately two weeks. MC3T3-E1 osteoblastic cells alternately exposed to the osteotropic biomolecules showed enhanced proliferation and early osteoblastic activity. Alternating delivery of 10nm Sim and either 500pg/ml or 5ng/ml PTH showed additive effects compared to the CB/Sim or CB/PTH devices. These implantable formulations may be useful for alternating delivery of different biomolecules to stimulate concurrent biological effects in focal tissue regeneration applications.