Deposition of graphene nanomaterial aerosols in human upper airways

Occupational Exposure during the Production and the Spray Deposition of Graphene Nanoplatelets-Based Polymeric Coatings

Graphene-based polymer composites are innovative materials which have recently found wide application in many industrial sectors thanks to the combination of their enhanced properties. The production of such materials at the nanoscale and their handling in combination with other materials introduce growing concerns regarding workers' exposure to nano-sized materials. The present study aims to evaluate the nanomaterials emissions during the work phases required to produce an innovative graphene-based polymer coating made of a water-based polyurethane paint filled with graphene nanoplatelets (GNPs) and deposited via the spray casting technique. For this purpose, a multi-metric exposure measurement strategy was adopted in accordance with the harmonized tiered approach published by the Organization for Economic Co-operation and Development (OECD). As a result, potential GNPs release has been indicated near the operator in a restricted area not involving other workers. The ventilated hood inside the production laboratory guarantees a rapid reduction of particle number concentration levels, limiting the exposure time. Such findings allowed us to identify the work phases of the production process with a high risk of exposure by inhalation to GNPs and to define proper risk mitigation strategies.

Carbon nanomaterial-involved EMT and CSC in cancer

Carbon nanomaterials (CNMs) are ubiquitous in our daily lives because of the outstanding physicochemical properties. CNMs play curial parts in industrial and medical fields, however, the risks of CNMs exposure to human health are still not fully understood. In view of, it is becoming extremely difficult to ignore the existence of the toxicity of CNMs. With the increasing exploitation of CNMs, it's necessary to evaluate the potential impact of these materials on human health. In recent years, more and more researches have shown that CNMs are contributed to the cancer formation and metastasis after long-term exposure through epithelial-mesenchymal transition (EMT) and cancer stem cells (CSCs) which is associated with cancer progression and invasion. This review discusses CNMs properties and applications in industrial and medical fields, adverse effects on human health, especially the induction of tumor initiation and metastasis through EMT and CSCs procedure.

Lung recovery from DNA damage induced by graphene oxide is dependent on size, dose and inflammation profile

BACKGROUND

A key aspect of any new material safety assessment is the evaluation of their in vivo genotoxicity. Graphene oxide (GO) has been studied for many promising applications, but there are remaining concerns about its safety profile, especially after inhalation. Herein we tested whether GO lateral dimension, comparing micrometric (LGO) and nanometric (USGO) GO sheets, has a role in the formation of DNA double strand breaks in mouse lungs. We used spatial resolution and differential cell type analysis to measure DNA damages in both epithelial and immune cells, after either single or repeated exposure.

RESULTS

GO induced DNA damages were size and dose dependent, in both exposure scenario. After single exposure to a high dose, both USGO and LGO induced significant DNA damage in the lung parenchyma, but only during the acute phase response (p < 0.05 for USGO; p < 0.01 for LGO). This was followed by a fast lung recovery at day 7 and 28 for both GOs. When evaluating the chronic impact of GO after repeated exposure, only a high dose of LGO induced long-term DNA damages in lung alveolar epithelia (at 84 days, p < 0.05). Regardless of size, low dose GO did not induce any significant DNA damage after repeated exposure. A multiparametric correlation analysis of our repeated exposure data revealed that transient or persistent inflammation and oxidative stress were associated to either recovery or persistent DNA damages. For USGO, recovery from DNA damage was correlated to efficient recovery from acute inflammation (i.e., significant secretion of SAA3, p < 0.001; infiltration of neutrophils, p < 0.01). In contrast, the persistence of LGO in lungs was associated to a long-lasting presence of multinucleated macrophages (up to 84 days, p < 0.05), an underlying inflammation (IL-1α secretion up to 28 days, p < 0.05) and the presence of persistent DNA damages at 84 days.

CONCLUSIONS

Overall these results highlight the importance of the exposure scenario used. We showed that LGO was more genotoxic after repeated exposure than single exposure due to persistent lung inflammation. These findings are important in the context of human health risk assessment and toward establishing recommendations for a safe use of graphene based materials in the workplace.

Hazard assessment of abraded thermoplastic composites reinforced with reduced graphene oxide

Graphene-related materials (GRMs) are subject to intensive investigations and considerable progress has been made in recent years in terms of safety assessment. However, limited information is available concerning the hazard potential of GRM-containing products such as graphene-reinforced composites. In the present study, we conducted a comprehensive investigation of the potential biological effects of particles released through an abrasion process from reduced graphene oxide (rGO)-reinforced composites of polyamide 6 (PA6), a widely used engineered thermoplastic polymer, in comparison to as-produced rGO. First, a panel of well-established in vitro models, representative of the immune system and possible target organs such as the lungs, the gut, and the skin, was applied. Limited responses to PA6-rGO exposure were found in the different in vitro models. Only as-produced rGO induced substantial adverse effects, in particular in macrophages. Since inhalation of airborne materials is a key occupational concern, we then sought to test whether the in vitro responses noted for these materials would translate into adverse effects in vivo. To this end, the response at 1, 7 and 28 days after a single pulmonary exposure was evaluated in mice. In agreement with the in vitro data, PA6-rGO induced a modest and transient pulmonary inflammation, resolved by day 28. In contrast, rGO induced a longer-lasting, albeit moderate inflammation that did not lead to tissue remodeling within 28 days. Taken together, the present study suggests a negligible impact on human health under acute exposure conditions of GRM fillers such as rGO when released from composites at doses expected at the workplace.

A follow-up study on workers involved in the graphene production process after the introduction of exposure mitigation measures: evaluation of genotoxic and oxidative effects

During nanomaterial (NM) production, workers could be exposed, particularly by inhalation, to NMs and other chemicals used in the synthesis process, so it is important to have suitable biomarkers to monitor potential toxic effects. Aim of this study was to evaluate the effectiveness of the introduction of exposure mitigation measures on workers unintentionally exposed to graphene co-pollutants during production process monitoring the presumable reduction of workplace NM contamination and of early genotoxic and oxidative effects previously found on these workers. We used Buccal Micronucleus Cytome (BMCyt) assay and Fpg-comet test, resulted the most sensitive biomarkers on our first biomonitoring work, to measure the genotoxic effects. We also detected urinary oxidized nucleic acid bases 8-oxoGua, 8-oxoGuo and 8-oxodGuo to evaluate oxidative damage. The genotoxic and oxidative effects were assessed on the same graphene workers (N = 6) previously studied, comparing the results with those found in the first biomonitoring and with the control group (N = 11). This was achieved 6 months after the installation of a special filter hood (where to perform the phases at higher risk of NM emission) and the improvement of environmental and personal protective equipment. Particle number concentration decreased after the mitigation measures. We observed reduction of Micronucleus (MN) frequency and oxidative DNA damage and increase of 8-oxodGuo excretion compared to the first biomonitoring. These results, although limited by the small subject number, showed the efficacy of adopted exposure mitigation measures and the suitability of used sensitive and noninvasive biomarkers to bio-monitor over time workers involved in graphene production process.

Charging of radioactive and environmental airborne particles

The charging of various airborne particles was investigated using single-particle levitation and charge-balance equations. Though radioactive decay and triboelectrification can induce charging, it is typically assumed that the aerosols in a radioactive plume will not carry significant charge at steady state since atmospheric particles can have their charge neutralized through the capture of adjacent counter-ions (i.e., diffusion charging). To assess this assumption, we directly measured the surface charge and charge density of various triboelectrically charged aerosols including radioactive uranium oxide (<1 μm), urban dust, Arizona desert dust, hydrophilic and hydrophobic silica nanoparticles, and graphene oxide powders using an electric field-assisted particle levitator in air. Of these particles, uranium oxide aerosols exhibited the highest surface charge density. Charge balance equations were employed to predict the average charge gained from radioactive decay as a function of time and to evaluate the effects of diffusion charging on triboelectrically charged radioactive and non-radioactive particles in the atmosphere. Simulation results show that particles, initially charged through triboelectrification, can be quickly discharged by diffusion charging in the absence of radioactive decay. Nevertheless, simulation results also indicate that particles can be strongly charged when they carry radionuclides. These experimental and simulation results suggest that radioactive decay can induce strong particle charging that may potentially affect atmospheric transport of airborne radionuclides.

Flake Graphene-Based Nanomaterial Approach for Triggering a Ferroptosis as an Attractive Theranostic Outlook for Tackling Non-Small Lung Cancer: A Mini Review

Lung cancer is a highly aggressive neoplasm that is now a leading cause of cancer death worldwide. One of the major approaches for killing cancer cells is related with activation of apoptotic cell death with anti-cancer drugs. However, the efficiency of apoptosis induction in tumors is limited. Consequently, the development of other forms of non-apoptotic cell death is up to date challenge for scientists worldwide. This situation motivated us to define the aim of this mini-review: gathering knowledge regarding ferroptosis—newly defined programmed cell death process characterized by the excessive accumulation of iron—and combining it with yet another interesting nanomaterial-based graphene approach. In this manuscript, we presented brief information about non-small lung cancer and ferroptosis, followed by a section depicting the key-features of graphene-based nanomaterials influencing their biologically relevant properties.

Respirable Coal Mine Dust: A Review of Respiratory Deposition, Regulations, and Characterization

In the late 1990s, despite years of efforts to understand and reduce coal worker’s pneumoconiosis (CWP) prevalence from more than 30% in 1970 to less than 4.2%, the level of occurrence among the US coal miners increased unexpectedly. The recent resurgence of lung diseases has raised concerns in the scientific and regulatory communities. In 2014, the United States Mine Safety and Health Administration (MSHA) issued a new dust rule changing the respirable coal mine dust (RCMD) exposure limits, measurement technology, and sampling protocol. The analysis for probable causes for the substantial increase in the CWP incidence rate is rather complicated. This paper aims to conduct a review of RCMD respiratory deposition, health effects, monitoring, regulations, and particle characteristics. The primary sources of RCMD along with the health risks from potential exposure are highlighted, and the current RCMD exposure regulations of the major coal producer countries are compared. A summary of RCMD characterization studies from 1972 to the present is provided. A review of the literature revealed that numerous factors, including geological and mining parameters, advancements in mining practices, particle characteristics, and monitoring approaches are considered to contribute to the recent resurgence of RCMD lung diseases. However, the root causes of the problem are still unknown. The effectiveness of the new dust rules in the United States will probably take years to be correctly assessed. Therefore, future research is needed to understand the relationship between RCMD particle characteristics and lung deposition, and the efficacy of current monitoring practices to measure the true dose of RCMD exposure.

Effect of Graphene and Graphene Oxide on Airway Barrier and Differential Phosphorylation of Proteins in Tight and Adherens Junction Pathways

Via inhalation we are continuously exposed to environmental and occupational irritants which can induce adverse health effects, such as irritant-induced asthma (IIA). The airway epithelium forms the first barrier encountered by these agents. We investigated the effect of environmental and occupational irritants on the airway epithelial barrier in vitro. The airway epithelial barrier was mimicked using a coculture model, consisting of bronchial epithelial cells (16HBE) and monocytes (THP-1) seeded on the apical side of a permeable support, and human lung microvascular endothelial cells (HLMVEC) grown on the basal side. Upon exposure to graphene (G) and graphene oxide (GO) in a suspension with fetal calf serum (FCS), ammonium persulfate (AP), sodium persulfate (SP) and hypochlorite (ClO⁻), the transepithelial electrical resistance (TEER) and flux of fluorescent labelled dextran (FD4-flux), was determined. Exposure to graphene nanoparticles (GNPs) induced an immediate negative effect on the epithelial barrier, whereas ClO⁻ only had a negative impact after 24 h of exposure. AP and SP did not affect the barrier properties. The tight junctions (TJ) network showed less connected zonula occludens 1 (ZO-1) and occludin staining in GNP-exposed cocultures. Functional analysis of the phosphoproteomic data indicated that proteins in the adherens junction (AJ) and TJ pathways showed an altered phosphorylation due to GNP exposure. To conclude, the negative effect of GNPs on the epithelial barrier can be explained by the slightly altered the TJ organization which could be caused by alterations in the phosphorylation level of proteins in the AJ and TJ pathway.

Graphene oxide induces dose-dependent lung injury in rats by regulating autophagy

Graphene is a two-dimensional structured material with a hexagonal honeycomb lattice composed of carbon atoms. The biological effects of graphene oxide (GO) have been extensively investigated, as it has been widely used in biological research due to its increased hydrophilicity/biocompatibility. However, the exact mechanisms underlying GO-associated lung toxicity have not yet been fully elucidated. The aim of the present study was to determine the role of GO in lung injury induction, as well as its involvement in oxidative stress, inflammation and autophagy. The results revealed that lower concentrations of GO (5 and 10 mg/kg) did not cause significant lung injury, but the administration of GO at higher concentrations (50 and 100 mg/kg) induced lung edema, and increased lung permeability and histopathological lung changes. High GO concentrations also induced oxidative injury and inflammatory reactions in the lung, demonstrated by increased levels of oxidative products [malondialdehyde(MDA) and 8-hydroxydeoxyguanosine (8-OHdG)] and inflammatory factors (TNF-α, IL-6, IL-1β and IL-8). The autophagy inhibitors 3-methyladenine (3-MA) and chloroquine (CLQ) inhibited autophagy in the lung and attenuated GO-induced lung injury, as demonstrated by a reduced lung wet-to-dry weight ratio, lower levels of protein in the bronchoalveolar lavage fluid, and a reduced lung injury score. Furthermore, 3-MA and CLQ significantly reduced the levels of MDA, 8-OHdG and inflammatory factors in lung tissue, suggesting that autophagy also mediates the development of oxidative injury and inflammation in the lung. Finally, autophagy was directly inhibited in BEAS-2B cells by short hairpin RNA-mediated autophagy protein 5 (ATG5) knockdown, which were then treated with GO. Cell viability, as well as the extent of injury (indicated by lactate dehydrogenase level) and oxidative stress were determined. The results revealed that ATG5 knockdown-induced autophagic inhibition significantly decreased cellular injury and oxidative stress, suggesting that autophagy induction is a key event that leads to lung injury during exposure to GO. In conclusion, the findings of the present study indicated that GO causes lung injury in a dose-dependent manner by inducing autophagy.

An integrated and multi-technique approach to characterize airborne graphene flakes in the workplace during production phases

Graphene is a one-atom-thick sheet of carbon atoms arranged in a honeycomb pattern and its unique and amazing properties make it suitable for a wide range of applications ranging from electronic devices to food packaging. However, the biocompatibility of graphene is dependent on the complex interplay of its several physical and chemical properties. The main aim of the present study is to highlight the importance of integrating different characterization techniques to describe the potential release of airborne graphene flakes in a graphene processing and production research laboratory. Specifically, the production and processing (i.e., drying) of few-layer graphene (FLG) through liquid-phase exfoliation of graphite are analysed by integrated characterization techniques. For this purpose, the exposure measurement strategy was based on the multi-metric tiered approach proposed by the Organization for Economic Cooperation and Development (OECD) via integrating high-frequency real-time measurements and personal sampling. Particle number concentration, average diameter and lung deposition surface area time series acquired in the worker's personal breathing zone (PBZ) were compared simultaneously to background measurements, showing the potential release of FLG. Then, electron microscopy techniques and Raman spectroscopy were applied to characterize particles collected by personal inertial impactors to investigate the morphology, chemical composition and crystal structure of rare airborne graphene flakes. The gathered information provides a valuable basis for improving risk management strategies in research and industrial laboratories.

Quantifying respiratory tract deposition of airborne graphene nanoplatelets: The impact of plate-like shape and folded structure

The booming development of commercial products containing graphene nanoplatelets (GNPs) triggers growing concerns over their release into the air. Precise prediction of human respiratory system deposition of airborne GNPs, especially in alveolar region, is very important for inhalation exposure assessment. In this study, the pulmonary deposition of airborne GNPs was predicted by the multiple-path particle dosimetry (MPPD) model with consideration of GNPs plate-like shape and folded structure effect. Different equivalent diameters of GNPs were derived and utilized to describe different deposition mechanisms in the MPPD model. Both of small GNPs (geometric lateral size d_g < 0.1 μm) and large GNPs (d_g > 10 μm) had high deposition fractions in human respiratory system. The total deposition fractions for 0.1 and 30 μm GNPs were 41.6% and 75.6%, respectively. Most of the small GNPs deposited in the alveolar region, while the large GNPs deposited in the head airways. The aerodynamic diameter of GNPs was much smaller than the geometric lateral dimension due to the nanoscale thickness. For GNPs with geometric lateral size of 30 μm, the aerodynamic diameter was 2.98 μm. The small aerodynamic diameter of plate-like GNPs enabled deposition in the alveolar region, and folded GNPs had higher alveolar deposition than planar GNPs. Heavy breathing led to higher GNPs deposition fraction in head airways and lower deposition fractions in the alveolar region than resting breathing.

Contribution of mast cells in irritant-induced airway epithelial barrier impairment in vitro

The airway epithelium is continuously exposed to environmental irritants, which can cause adverse effects such as irritant-induced asthma (IIA). Mast cells are located near airway epithelia and are able to respond to a variety of stimuli. We aimed to investigate whether mast cells influence the response of the epithelium upon irritant exposure. Two cell lines and three different seeding conditions, that is, bronchial epithelial cells (16HBE) only, 16HBE with mast cells (HMC-1's) basolaterally, and 16HBE with HMC-1's apically, were established. Upon exposure to the environmental irritants, graphene (G), graphene oxide (GO), diesel exhaust particles (DEPs) or hypochlorite (ClO^-), transepithelial electrical resistance (TEER) and paracellular flux of fluorescent-labeled dextrans were determined, along with the release of mediators. Identical experiments were conducted with the Ca²⁺ ionophore ionomycin. Exposure to G and GO induced a significant and permanent decrease of approximately 70% in TEER after 3 h of exposure, whereas DEP and ClO^- exposure resulted in a transient decrease of approximately 20% in TEER. This response pattern was similar in all the different seeding conditions. After 24 h of exposure, fluorescein isothiocyanate-dextran transport was 10-fold greater for G and 5-fold greater for GO in each of the tested seeding conditions, while DEP and ClO^- induced no change compared to the control. Upon exposure to the irritants, 16HBE did not release thymic stromal lymphopoietin, interleukin 33 (IL-33), or IL-1α, and HMC-1 cells did not release histamine, IL-6, or IL-8. Epithelial barrier integrity upon treatment with ionomycin was not affected by the presence of HMC-1 cells. A limited amount of IL-6 and IL-8 was released by ionomycin-exposed HMC-1 cells. To conclude, we found that the studied environmental irritants do not directly or indirectly activate HMC-1 cells. These mast cells did not influence the epithelial barrier function upon environmental exposure, and thus currently do not provide additional information for the underlying mechanism of IIA.

Release of graphene-related materials from epoxy-based composites: characterization, quantification and hazard assessment in vitro

Due to their mechanical strength, thermal stability and electrical conductivity, graphene-related materials (GRMs) have been extensively explored for various applications. Moreover, GRMs have been studied and applied as fillers in polymer composite manufacturing to enhance the polymer performance. With the foreseen growth in GRM production, occupational and consumer exposure is inevitable, thus raising concerns for potential health risks. Therefore, this study aims (1) to characterize aerosol particles released after mechanical abrasion on GRM-reinforced epoxy composites, (2) to quantify the amounts of protruding and free-standing GRMs in the abraded particles and (3) to assess the potential effects of the pristine GRMs as well as the abraded particles on human macrophages differentiated from the THP-1 cell line in vitro. GRMs used in this study included graphene nanoplatelets (GNPs), graphene oxide (GO), and reduced graphene oxide (rGO). All types of pristine GRMs tested induced a dose-dependent increase in reactive oxygen species formation, but a decrease in cell viability was only detected for large GNPs at high concentrations (20 and 40 μg mL^-1). The particle modes measured using a scanning mobility particle sizer (SMPS) were 300-400 nm and using an aerodynamic particle sizer (APS) were between 2-3 μm, indicating the release of respirable particles. A significant fraction (51% to 92%) of the GRMs embedded in the epoxy composites was released in the form of free-standing or protruding GRMs in the abraded particles. The abraded particles did not induce any acute cytotoxic effects.

Nanoparticle exposure and hazard in the ceramic industry: an overview of potential sources, toxicity and health effects

The ceramic industry is an industrial sector of great impact in the global economy that has been benefiting from advances in materials and processing technologies. Ceramic manufacturing has a strong potential for airborne particle formation and emission, namely of ultrafine particles (UFP) and nanoparticles (NP), meaning that workers of those industries are at risk of potential exposure to these particles. At present, little is known on the impact of engineered nanoparticles (ENP) on the environment and human health and no established Occupational Exposure Limits (OEL) or specific regulations to airborne nanoparticles (ANP) exposure exist raising concerns about the possible consequences of such exposure. In this paper, we provide an overview of the current knowledge on occupational exposure to NP in the ceramic industry and their impact on human health. Possible sources and exposure scenarios, a summary of the existing methods for evaluation and monitoring of ANP in the workplace environment and proposed Nano Reference Values (NRV) for different classes of NP are presented. Case studies on occupational exposure to ANP generated at different stages of the ceramic manufacturing process are described. Finally, the toxicological potential of intentional and unintentional ANP that have been identified in the ceramic industry workplace environment is discussed based on the existing evidence from in vitro and in vivo inhalation toxicity studies.

Advances in the application, toxicity and degradation of carbon nanomaterials in environment: A review

Carbon nanomaterials (CNMs) are novel nanomaterials with excellent physicochemical properties, which are widely used in biomedicine, energy and sensing. Besides, CNMs also play an important role in environmental pollution control, which can absorb heavy metals, antibiotics and harmful gases. However, CNMs are inevitably entering the environment while they are rapidly developing. They are harmful to living organisms in the environment and are difficult to degrade under natural conditions. Here, we systematically describe the toxicity of carbon nanotubes (CNTs), graphene (GRA) and C₆₀ to cells, animals, humans, and microorganisms. According to the current research results, the toxicity mechanism is summarized, including oxidative stress response, mechanical damage and effects on biological enzymes. In addition, according to the latest research progress, we focus on the two major degradation methods of chemical degradation and biodegradation of CNTs, GRA and C₆₀. Meanwhile, the reaction conditions and degradation mechanisms of degradation are respectively stated. Moreover, we have prospects for the limitations of CNM degradation under non-experimental conditions and their potential application.

Respiratory deposition of ultrafine welding fume particles

The inhalation and the deposition of welding-generated ultrafine particles in welders' respiratory tracts have been linked to severe pulmonary impairments. In the present study, a mobile aerosol lung deposition apparatus (MALDA) was developed and applied to study the respiratory deposition of ultrafine welding fume particles. The MALDA was constructed with a set of physiologically representative human tracheobronchial airway replicas made with high-resolution 3D printers. Ultrafine welding fume particles were generated in a welding fume chamber and delivered to the MALDA. A series of respiratory deposition experiments were carried out using the MALDA to investigate the deposition of ultrafine welding fume particles in different airway generations of the tracheobronchial airways. The results showed that the fractional deposition of ultrafine welding fume particle in the human tracheobronchial airways down to the 9^th airway generation could be readily and systematically measured by the MALDA. The estimated cumulative respiratory deposition ranged from approximately 9-31% for ultrafine welding fume particles between 10 and 100 nm in diameter. The results acquired demonstrated that the MALDA developed has the potential to become a useful apparatus in the future to estimate the respiratory deposition of ultrafine particles in real workplaces.

Persistent DNA methylation changes in zebrafish following graphene quantum dots exposure in surface chemistry-dependent manner

Modified nano-graphene quantum dots (M-GQDs) are widely used in bioimaging, drug delivery, and chemical engineering. Because M-GQDs could induce reactive oxygen species and DNA damage, we hypothesized that M-GQDs modulate DNA methylation. To test this hypothesis, zebrafish were exposed to reduced, hydroxylated, or aminated GQDs (graphene quantum dots) at different concentrations for 7 days; global DNA methylation in liver, gill, and intestine was then studied. M-GQDs induced global DNA hypermethylation in various tissues in a dose-dependent manner. The global DNA methylation of reduced and aminated GQDs exposure showed a significant increase in intestines even at low concentrations (2 mg/L), suggesting that intestines are the main target for these two M-GQDs. The effects of global DNA methylation were evaluated 14 days after exposure had ceased. DNA methylation in the livers of exposure groups was significantly higher than in control zebrafish. Global DNA methylation increased in livers of zebrafish even after exposure to aminated GQDs (2 mg/L) had ceased, indicating a more complex mechanism of DNA methylation deregulation. The present results showed that chemical groups in the surface of GQDs are a critical factor for modulating DNA methylation.

A new approach to estimate ultrafine particle respiratory deposition

Ultrafine particles (UFPs) in workplaces have been and continue to be an important occupational health concern. The inhalation and the consequent deposition of UFPs in workers' lower airways can lead to many adverse health effects. Therefore, it is vital to study the deposition of UFPs in the human respiratory tract from the viewpoint of occupational health. In this study, a set of physiologically representative human tracheobronchial airway replicas were made using high-resolution 3D printers, and a new approach that was distinct from the traditional methods was developed to apply these airway replicas in estimating UFP respiratory deposition. The results showed that UFP respiratory deposition could be readily and systematically measured by the differential-based approach. The results of this study imply the feasibility of developing a mobile aerosol lung deposition apparatus in the future for on-site workplace UFP respiratory deposition to evaluate the UFP inhalation dosimetry for workers in the real workplaces.

In Vitro Cytotoxicity and Morphological Assessments of GO-ZnO against the MCF-7 Cells: Determination of Singlet Oxygen by Chemical Trapping

Graphene-based materials have attracted considerable interest owing to their distinctive characteristics, such as their biocompatibility in terms of both their physical and intrinsic chemical properties. The use of nanomaterials with graphene as a biocompatible agent has increased due to an uptick in dedication from biomedical investigators. Here, GO-ZnO was characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), ultraviolet-visible (UV-Vis) spectroscopy, energy dispersive X-ray analysis (EDAX), and Raman spectroscopy for structural, morphological, and elemental analysis. The toxic extent of GO-ZnO was noted by a methyl-thiazole-tetrazolium (MTT), while cellular morphology was observed towards the MCF-7 cells using an inverted microscope at magnification 40×. The cytotoxic effect of GO-ZnO investigated the cell viability reduction in a dose-dependent manner, as well as prompted the cell demise/destruction in an apoptotic way. Moreover, statistical analysis was performed on the experimental outcomes, with p-values < 0.05 kept as significant to elucidate the results. The generation of reactive oxygen species (ROS) demonstrated the potential applicability of graphene in tumor treatment. These key results attest to the efficacy of GO-ZnO nanocomposites as a substantial candidate for breast malignancy treatment.

Differences in inflammation and acute phase response but similar genotoxicity in mice following pulmonary exposure to graphene oxide and reduced graphene oxide

We investigated toxicity of 2–3 layered >1 μm sized graphene oxide (GO) and reduced graphene oxide (rGO) in mice following single intratracheal exposure with respect to pulmonary inflammation, acute phase response (biomarker for risk of cardiovascular disease) and genotoxicity. In addition, we assessed exposure levels of particulate matter emitted during production of graphene in a clean room and in a normal industrial environment using chemical vapour deposition. Toxicity was evaluated at day 1, 3, 28 and 90 days (18, 54 and 162 μg/mouse), except for GO exposed mice at day 28 and 90 where only the lowest dose was evaluated. GO induced a strong acute inflammatory response together with a pulmonary (Serum-Amyloid A, Saa3) and hepatic (Saa1) acute phase response. rGO induced less acute, but a constant and prolonged inflammation up to day 90. Lung histopathology showed particle agglomerates at day 90 without signs of fibrosis. In addition, DNA damage in BAL cells was observed across time points and doses for both GO and rGO. In conclusion, pulmonary exposure to GO and rGO induced inflammation, acute phase response and genotoxicity but no fibrosis.

Toxicity of graphene-family nanoparticles: a general review of the origins and mechanisms

Due to their unique physicochemical properties, graphene-family nanomaterials (GFNs) are widely used in many fields, especially in biomedical applications. Currently, many studies have investigated the biocompatibility and toxicity of GFNs in vivo and in intro. Generally, GFNs may exert different degrees of toxicity in animals or cell models by following with different administration routes and penetrating through physiological barriers, subsequently being distributed in tissues or located in cells, eventually being excreted out of the bodies. This review collects studies on the toxic effects of GFNs in several organs and cell models. We also point out that various factors determine the toxicity of GFNs including the lateral size, surface structure, functionalization, charge, impurities, aggregations, and corona effect ect. In addition, several typical mechanisms underlying GFN toxicity have been revealed, for instance, physical destruction, oxidative stress, DNA damage, inflammatory response, apoptosis, autophagy, and necrosis. In these mechanisms, (toll-like receptors-) TLR-, transforming growth factor β- (TGF-β-) and tumor necrosis factor-alpha (TNF-α) dependent-pathways are involved in the signalling pathway network, and oxidative stress plays a crucial role in these pathways. In this review, we summarize the available information on regulating factors and the mechanisms of GFNs toxicity, and propose some challenges and suggestions for further investigations of GFNs, with the aim of completing the toxicology mechanisms, and providing suggestions to improve the biological safety of GFNs and facilitate their wide application.