An update on calcium carbonate nanoparticles as cancer drug/gene delivery system

Green Carbon Dots/CaCO3/Abamectin Colloidal Pesticide Formulation for Safer and More Effective Pest Management

An ideal green leaf-deposited pesticide formulation should offer advantages such as good water dispersibility, strong foliar affinity, sustained or controlled release of active ingredients, photostability and rain-fastness, minimal nontarget toxicity, use of nontoxic organic solvents, and degradable adjuvants. In line with this objective, we present green preparation of a colloidal pesticide formulation using optimized lysine-derived carbon dots (LysCDs)-modified CaCO3 (LysCDs/CaCO3) particles as the carrier and abamectin (Abm) as the active ingredient. The loading capacity of abamectin in this colloidal pesticide (LysCDs/CaCO3/Abm) is 1.7 to 2.1 times higher than that of its counterpart (CaCO3/Abm) prepared without LysCDs, which is attributed to the increased specific surface area and pore volume of LysCDs/CaCO3 particles. Due to the acid-induced degradation of CaCO3, the release of abamectin for LysCDs/CaCO3/Abm is accelerated under weakly acidic conditions, which is accompanied by the release of Ca2+ ions and the fluorescence changes of LysCDs. The incorporation of LysCDs enhances the photostability and foliar adhesiveness of this colloidal pesticide, resulting in the highest degree of foliar retention when exposed to ultraviolet (UV) light or rainfall, compared to free-form abamectin and CaCO3/Abm. This results in the best performance of pest control on Plutella xylostella for LysCDs/CaCO3/Abm in both indoor and outdoor tests. Nontarget biocompatibility evaluations show that LysCDs/CaCO3/Abm exhibits lower acute toxicity to zebrafish and earthworms than free-form abamectin. In addition, this colloidal pesticide is favored by the minimal residue of the adjuvant material after abamectin release, which is converted into harmless Ca2+ ions, CO2, and LysCDs. Therefore, this work designs a safer and more effective colloidal pesticide formulation to deliver abamectin with minimal adjuvant residue, realizing its trajectory as basically "circular and green".

Antibacterial Effect of Co-Loaded Curcumin and Rutin in Mesoporous Silica Nanoparticles Compared to their Loading Alone

AIMS

The present study aimed to assess the antibacterial effect of co-loaded rutin and curcumin in mesoporous silica nanoparticles (Cur-Rut-MSNs).

BACKGROUND

Rutin is a nontoxic phytochemical that is present expansively in vegetables and fruits. Curcumin is an active ingredient of Curcuma longa. Curcumin and rutin have a variety of therapeutic effects, essentially antimicrobial, anti-inflammatory, and antioxidant actions.

OBJECTIVE

Low aqueous solubility and poor bioavailability of rutin and curcumin limit their application in therapeutic goals. One of the advantageous routes to improve their bioavailability and solubility is nanoformulation. Co-delivery of therapeutic agents has been reported to have better therapeutic effects than monotherapy.

METHODS

The present study has evaluated the antibacterial properties of Cur-Rut-MSNs. The Minimum Inhibitory Concentration (MIC) of Cur-Rut-MSNs has been assessed against different bacteria.

RESULTS

Cur-Rut-MSNs exerted significantly higher antibacterial effect than curcumin-loaded MSNs (Cur-MSNs) and rutin-loaded MSNs (Rut-MSNs) against Acinetobacter baumannii, Escherichia coli, Staphylococcus aureus, and Enterococcus faecalis (p<0.05).

CONCLUSION

The antibacterial effect was enhanced by the co-loading of rutin and curcumin in MSNs. According to the findings of this study, Cur-Rut-MSNs exhibit an antibacterial effect and can be a favorable nanoformulation against planktonic bacteria.

Advances in nanotherapeutics for tumor treatment by targeting calcium overload

Traditional antitumor strategies are facing challenges such as low therapeutic efficacy and high side effects, highlighting the significance of developing non-toxic or low-toxic alternative therapies. As a second messenger, calcium ion (Ca2+) plays an important role in cellular metabolism and communication. However, persistent Ca2+ overload leads to mitochondrial structural and functional dysfunction and ultimately induced apoptosis. Therefore, an antitumor strategy based on calcium overload is a promising alternative. Here, we first reviewed the classification of calcium-based nanoparticles (NPs) for exogenous Ca2+ overload, including calcium carbonate (CaCO3), calcium phosphate (CaP), calcium peroxide (CaO2), and hydroxyapatite (HA), calcium hydroxide, etc. Next, the current endogenous Ca2+ overload strategies were summarized, including regulation of Ca2+ channels, destruction of membrane integrity, induction of abnormal intracellular acidity and oxidative stress. Due to the specificity of the tumor microenvironment, it is difficult to completely suppress tumor development with monotherapy. Therefore, we reviewed the progress based on mitochondrial Ca2+ overload, which improved the treatment efficiency by combining photothermal therapy (PTT), photodynamic therapy (PDT), chemodynamic therapy (CDT), sonodynamic therapy (SDT), immunogenic cell death (ICD) and gas therapy. We further explored in detail the advantages and promising new targets of this combination antitumor strategies to better address future opportunities and challenges.

Inhibitory effects of chlorhexidine-loaded calcium carbonate nanoparticles against dental implant infections

This study aimed to design sustained released biodegradable calcium carbonate nanoparticles loaded with chlorhexidine (CHX-loaded NPs) and to investigate the early osteogenic differentiation and antimicrobial effects on the important bacteria involved in infections of dental implants. The microemulsion method was used to prepare the calcium carbonate nanoparticles loaded with chlorhexidine. The prepared nanoparticles were characterized using conventional methods. The release pattern determination and the biodegradation test were performed for the prepared nanoparticles. For the early osteogenic differentiation test of the prepared nanoparticles, alkaline phosphatase (ALP) activity was detected in human dental pulp stem cells (HDPSCs). The antimicrobial effects of the nanoparticles were evaluated against Escherichia coli, Streptococcus mutans, Enterococcus faecalis, Staphylococcus aureus, and Pseudomonas aeruginosa. The sizes of free calcium carbonate nanoparticles and CHX-loaded NPs were 105 ± 1.63 and 118 ± 1.47 nm and their zeta potentials were - 27 and - 36, respectively. A 50% degradation of nanoparticles was achieved after 100 days. These nanoparticles showed a two-stage sustained release pattern in vitro. Microscopic images revealed that the morphology of free calcium carbonate nanoparticles primarily took on a spherical calcite form, while CHX-loaded NPs predominantly exhibited a cauliflower-like vaterite polymorph. The nanoparticles increased the activity of ALP in cells in two weeks significantly (p < 0.05). Antimicrobial and antibiofilm results showed an efficient effect of the prepared nanoparticle against the studied bacteria. Calcium carbonate nanoparticles are an efficient multifunctional vector for chlorhexidine and can be used as a bioactive antibacterial agent against various oral microorganisms to prevent implant infections.

Insight Into Interfacial Behaviors between Doxorubicin and Zwitterion/PAMAM/CQD Hybrid Nanocarrier. A Molecular Dynamics Simulations Study

Poly(amidoamine) dendrimer (PAMAM)/carbon quantum dot (CQD) nanohybrids are promising candidates for many biomedical applications, including drug delivery. Effectively designing a hybrid nanocarrier requires a deep understanding of the interactions of the hybrid nanoparticle with the drug to ensure drug stability and therapeutic efficiency. In this study, we utilized fully atomistic molecular dynamics (MD) simulations to investigate the adsorption behavior of a doxorubicin (DOX) anticancer drug onto a zwitterion/PAMAM/CQD hybrid nanocarrier. The hybrid nanoparticles were composed of CQD, at two oxidation levels, grafted with PAMAM dendrimers of generation 3 (G3) or 4 (G4) decorated with zwitterion monomers. Our work reveals that the generation of the grafted dendrimer was the primary determinant of efficient adsorption of DOX, unlike the oxidation level of CQD or dendrimer surface chemistry. After grafting, the G4 dendrimers assume a more stretched conformation compared to the G3 dendrimers. This allowed DOX molecules to penetrate inside the dendritic cavities of G4 dendrimers, resulting in enhanced drug protection. The hydrophobic interaction, between the aromatic structure of DOX molecules and the nonpolar parts of dendrimers, has been proven to play a crucial role in mediating the adsorption of drug molecules. These findings provide valuable insights to assist in the design of a zwitterion/PAMAM/CQD hybrid nanoplatform for drug delivery applications.

Biomimetic Scaffolds of Calcium-Based Materials for Bone Regeneration

Calcium-based materials, such as calcium carbonate, calcium phosphate, and calcium silicate, have attracted significant attention in biomedical research, owing to their unique physicochemical properties and versatile applications. The distinctive characteristics of these materials, including their inherent biocompatibility and tunable structures, hold significant promise for applications in bone regeneration and tissue engineering. This review explores the biomedical applications of calcium-containing materials, particularly for bone regeneration. Their remarkable biocompatibility, tunable nanostructures, and multifaceted functionalities make them pivotal for advancing regenerative medicine, drug delivery system, and biomimetic scaffold applications. The evolving landscape of biomedical research continues to uncover new possibilities, positioning calcium-based materials as key contributors to the next generation of innovative biomaterial scaffolds.

Amifostine loaded lipid-calcium carbonate nanoparticles as an oral drug delivery system for radiation protection

Amifostine (AMF) as the first-line radiation protection drug, usually suffered from low compliance and short half-life upon clinical applications. The development of oral drug delivery system (DDS) for AMF is a promising solution. However, the inherent shortages of AMF present significant challenges in the design of suitable oral DDS. Here in this study, we utilized the ability of calcium ions to bind with AMF and prepared AMF loaded calcium carbonate (CC) core, CC/AMF, using phase transferred coprecipitation method. We further modified the CC/AMF using phospholipids to prepare AMF loaded lipid-calcium carbonate (LCC) hybrid nanoparticles (LCC/AMF) via a thin-film dispersion method. LCC/AMF combines the oral advantages of lipid nanoparticles with the drug-loading capabilities of CC, which was shown as uniform nano-sized formulation with decent stability in aqueous solution. With favorable intestinal transport and absorption effects, it effectively enhances the in vivo radiation protection efficacy of AMF through oral administration. More importantly, we further investigated the cellular accumulation profile and intracellular transport mechanism of LCC/AMF using MDCK and Caco-2 cell lines as models. This research not only alters the current administration method of AMF to enhance its convenience and compliance, but also provides insights and guidance for the development of more suitable oral DDS for AMF in the future.

Recent Advancements in Biomaterials for Chimeric Antigen Receptor T Cell Immunotherapy

Cellular immunotherapy is an innovative cancer treatment method that utilizes the patient's own immune system to combat tumor cells effectively. Currently, the mainstream therapeutic approaches include chimeric antigen receptor T cell (CAR-T) therapy, T cell receptor gene-modified T cell therapy and chimeric antigen receptor natural killer-cell therapy with CAR-T therapy mostly advanced. Nonetheless, the conventional manufacturing process of this therapy has shortcomings in each step that call for improvement. Marked efforts have been invested for its enhancement while notable progresses achieved in the realm of biomaterials application. With CAR-T therapy as a prime example, the aim of this review is to comprehensively discuss the various biomaterials used in cell immunotherapy, their roles in regulating immune cells, and their potential for breakthroughs in cancer treatment from gene transduction to efficacy enhancement. This article additionally addressed widely adopted animal models for efficacy evaluating.

Influence of natural polysaccharides on the morphology and properties of hybrid vaterite microcrystals

Co-precipitation of biopolymers into calcium carbonate crystals changes their physicochemical and biological properties. This work studies hybrid microcrystals of vaterite obtained in the presence of natural polysaccharides, as carriers for the delivery of proteins and enzymes. Hybrid microcrystals with dextran sulfate, chondroitin sulfate, heparin, fucoidan, and pectin were obtained and compared. The impact of polysaccharides on the morphology (particle diameter, surface area, nanocrystallite and pore size), polysaccharide content and surface charge of hybrid microcrystals was studied. Only microcrystals with fucoidan and heparin exhibited antioxidant activity against •ОН radical. The surface charge and pore size of the hybrid microcrystals affected the sorption of albumin, catalase, chymotrypsin, mucin. A decrease in the catalytic constant and Michaelis constant was observed for catalase sorbed on the hybrid crystals. The biocompatibility of microcrystals depended on the nature of the included polysaccharide: crystals with sulfated polysaccharides increased blood plasma coagulation but not platelet aggregation, and crystals with dextran sulfate had the greatest cytotoxicity against HT-29 cells but not erythrocytes. Hybrid microcrystals with all polysaccharides except chondroitin sulfate reduced erythrocyte lysis in vitro compared with vaterite crystals. The obtained results enable to create novel carriers based on hybrid vaterite crystals with polysaccharides, beneficial for the delivery of protein drugs.

pH-responsive self-assembled nanoparticles for tumor-targeted drug delivery

Recent advances in the field of drug delivery have opened new avenues for the development of novel nanodrug delivery systems (NDDS) in cancer therapy. Self-assembled nanoparticles (SANPs) based on tumour microenvironment have great advantages in improving antitumor effect, and pH-responsive SANPs prepared by the combination of pH-responsive nanomaterials and self-assembly technology can effectively improve the efficacy and reduce the systemic toxicity of antitumor drugs. In this review, we describe the characteristics of self-assembly and its driving force, the mechanism of pH-responsive NDDS, and the nanomaterials for pH-responsive SANPs type. A series of pH-responsive SANPs for tumour-targeted drug delivery are discussed, with an emphasis on the relation between structural features and theranostic performance.

Functionalized Calcium Carbonate-Based Microparticles as a Versatile Tool for Targeted Drug Delivery and Cancer Treatment

Nano- and microparticles are increasingly widely used in biomedical research and applications, particularly as specific labels and targeted delivery vehicles. Silica has long been considered the best material for such vehicles, but it has some disadvantages limiting its potential, such as the proneness of silica-based carriers to spontaneous drug release. Calcium carbonate (CaCO3) is an emerging alternative, being an easily available, cost-effective, and biocompatible material with high porosity and surface reactivity, which makes it an attractive choice for targeted drug delivery. CaCO3 particles are used in this field in the form of either bare CaCO3 microbeads or core/shell microparticles representing polymer-coated CaCO3 cores. In addition, they serve as removable templates for obtaining hollow polymer microcapsules. Each of these types of particles has its specific advantages in terms of biomedical applications. CaCO3 microbeads are primarily used due to their capacity for carrying pharmaceutics, whereas core/shell systems ensure better protection of the drug-loaded core from the environment. Hollow polymer capsules are particularly attractive because they can encapsulate large amounts of pharmaceutical agents and can be so designed as to release their contents in the target site in response to specific stimuli. This review focuses first on the chemistry of the CaCO3 cores, core/shell microbeads, and polymer microcapsules. Then, systems using these structures for the delivery of therapeutic agents, including drugs, proteins, and DNA, are outlined. The results of the systematic analysis of available data are presented. They show that the encapsulation of various therapeutic agents in CaCO3-based microbeads or polymer microcapsules is a promising technique of drug delivery, especially in cancer therapy, enhancing drug bioavailability and specific targeting of cancer cells while reducing side effects. To date, research in CaCO3-based microparticles and polymer microcapsules assembled on CaCO3 templates has mainly dealt with their properties in vitro, whereas their in vivo behavior still remains poorly studied. However, the enormous potential of these highly biocompatible carriers for in vivo applications is undoubted. This last issue is addressed in depth in the Conclusions and Outlook sections of the review.

CaCO3 nanoplatform for cancer treatment: drug delivery and combination therapy

The use of nanocarriers for drug delivery has opened up exciting new possibilities in cancer treatment. Among them, calcium carbonate (CaCO3) nanocarriers have emerged as a promising platform due to their exceptional biocompatibility, biosafety, cost-effectiveness, wide availability, and pH-responsiveness. These nanocarriers can efficiently encapsulate a variety of small-molecule drugs, proteins, and nucleic acids, as well as co-encapsulate multiple drugs, providing targeted and sustained drug release with minimal side effects. However, the effectiveness of single-drug therapy using CaCO3 nanocarriers is limited by factors such as multidrug resistance, tumor metastasis, and recurrence. Combination therapy, which integrates multiple treatment modalities, offers a promising approach for tackling these challenges by enhancing efficacy, leveraging synergistic effects, optimizing therapy utilization, tailoring treatment approaches, reducing drug resistance, and minimizing side effects. CaCO3 nanocarriers can be employed for combination therapy by integrating drug therapy with photodynamic therapy, photothermal therapy, sonodynamic therapy, immunotherapy, radiation therapy, radiofrequency ablation therapy, and imaging. This review provides an overview of recent advancements in CaCO3 nanocarriers for drug delivery and combination therapy in cancer treatment over the past five years. Furthermore, insightful perspectives on future research directions and development of CaCO3 nanoparticles as nanocarriers in cancer treatment are discussed.

Calcium Carbonate-Based Nanoplatforms for Cancer Therapeutics: Current State of Art and Future Breakthroughs

With the rapid development of nanotechnology, nanomaterials have shown immense potential for antitumor applications. Nanosized calcium carbonate (CaCO3) materials exhibit excellent biocompatibility and degradability, and have been utilized to develop platform technologies for cancer therapy. These materials can be engineered to carry anticancer drugs and functional groups that specifically target cancer cells and tissues, thereby enhancing therapeutic efficacy. Additionally, their physicochemical properties can be tailored to enable stimuli-responsive therapy and precision drug delivery. This Review consolidates recent literatures focusing on the synthesis, physicochemical properties, and multimodal antitumor therapies of CaCO3-based nanoplatforms (CBN). We also explore the current challenges and potential breakthroughs in the development of CBN for antitumor applications, providing a valuable reference for researchers in the field.

IL-12-Overexpressed Nanoparticles Suppress the Proliferation of Melanoma Through Inducing ICD and Activating DC, CD8+ T, and CD4+ T Cells

Purpose

The drug resistance and low response rates of immunotherapy limit its application. This study aimed to construct a new nanoparticle (CaCO3-polydopamine-polyethylenimine, CPP) to effectively deliver interleukin-12 (IL-12) and suppress cancer progress through immunotherapy.

Methods

The size distribution of CPP and its zeta potential were measured using a Malvern Zetasizer Nano-ZS90. The morphology and electrophoresis tentative delay of CPP were analyzed using a JEM-1400 transmission electron microscope and an ultraviolet spectrophotometer, respectively. Cell proliferation was analyzed by MTT assay. Proteins were analyzed by Western blot. IL-12 and HMGB1 levels were estimated by ELISA kits. Live/dead staining assay was performed using a Calcein-AM/PI kit. ATP production was detected using an ATP assay kit. The xenografts in vivo were estimated in C57BL/6 mice. The levels of CD80+/CD86+, CD3+/CD4+ and CD3+/CD8+ were analyzed by flow cytometry.

Results

CPP could effectively express EGFP or IL-12 and increase ROS levels. Laser treatment promoted CPP-IL-12 induced the number of dead or apoptotic cell. CPP-IL-12 and laser could further enhance CALR levels and extracellular HMGB1 levels and decrease intracellular HMGB1 and ATP levels, indicating that it may induce immunogenic cell death (ICD). The tumors and weights of xenografts in CPP-IL-12 or laser-treated mice were significantly reduced than in controls. The IL-12 expression, the CD80+/CD86+ expression of DC from lymph glands, and the number of CD3+/CD8+T or CD3+/CD4+T cells from the spleen increased in CPP-IL-12-treated or laser-treated xenografts compared with controls. The levels of granzyme B, IFN-γ, and TNF-α in the serum of CPP-IL-12-treated mice increased. Interestingly, CPP-IL-12 treatment in local xenografts in the back of mice could effectively inhibit the growth of the distant untreated tumor.

Conclusion

The novel CPP-IL-12 could overexpress IL-12 in melanoma cells and achieve immunotherapy to melanoma through inducing ICD, activating CD4+ T cell, and enhancing the function of tumor-reactive CD8+ T cells.

Modulation of Dendritic Cell Function via Nanoparticle-Induced Cytosolic Calcium Changes

Calcium nanoparticles have been investigated for applications, such as drug and gene delivery. Additionally, Ca2+ serves as a crucial second messenger in the activation of immune cells. However, few studies have systematically studied the effects of calcium nanoparticles on the calcium levels and functions within immune cells. In this study, we explore the potential of calcium nanoparticles as a vehicle to deliver calcium into the cytosol of dendritic cells (DCs) and influence their functions. We synthesized calcium hydroxide nanoparticles, coated them with a layer of silica to prevent rapid degradation, and further conjugated them with anti-CD205 antibodies to achieve targeted delivery to DCs. Our results indicate that these nanoparticles can efficiently enter DCs and release calcium ions in a controlled manner. This elevation in cytosolic calcium activates both the NFAT and NF-κB pathways, in turn promoting the expression of costimulatory molecules, antigen-presenting molecules, and pro-inflammatory cytokines. In mouse tumor models, the calcium nanoparticles enhanced the antitumor immune response and augmented the efficacy of both radiotherapy and chemotherapy without introducing additional toxicity. Our study introduces a safe nanoparticle immunomodulator with potential widespread applications in cancer therapy.

A multifunctional composite hydrogel that sequentially modulates the process of bone healing and guides the repair of bone defects

Calcium carbonate (CaCO3), which exhibits excellent biocompatibility and bioactivity, is a well-established bone filling material for bone defects. Here, we synthesized CaCO3microspheres (CMs) to use as an intelligent carrier to load bone morphogenetic protein-2 (BMP-2). Subsequently, drug-loaded CMs and catalase (CAT) were added to methacrylated gelatin (GelMA) hydrogels to prepare a composite hydrogel for differential release of the drugs. CAT inside hydrogels was released with a fast rate to eliminate H2O2and generate oxygen. Constant BMP-2 release from CMs induced rapid osteogenesis. Resultsin vitroindicated that the composite hydrogels efficiently reduced the level of intracellular reactive oxygen species, preventing cells from being injured by oxidative stress, promoting cell survival and proliferation, and enhancing osteogenesis. Furthermore, animal experiments demonstrated that the composite hydrogels were able to inhibit the inflammatory response, regulate macrophage polarization, and facilitate the healing of bone defects. These findings indicate that a multi-pronged strategy is greatly expected to promote the bone healing by modulating pathological microenvironments.

Recent Developments in CaCO3 Nano-Drug Delivery Systems: Advancing Biomedicine in Tumor Diagnosis and Treatment

Calcium carbonate (CaCO3), a natural common inorganic material with good biocompatibility, low toxicity, pH sensitivity, and low cost, has a widespread use in the pharmaceutical and chemical industries. In recent years, an increasing number of CaCO3-based nano-drug delivery systems have been developed. CaCO3 as a drug carrier and the utilization of CaCO3 as an efficient Ca2+ and CO2 donor have played a critical role in tumor diagnosis and treatment and have been explored in increasing depth and breadth. Starting from the CaCO3-based nano-drug delivery system, this paper systematically reviews the preparation of CaCO3 nanoparticles and the mechanisms of CaCO3-based therapeutic effects in the internal and external tumor environments and summarizes the latest advances in the application of CaCO3-based nano-drug delivery systems in tumor therapy. In view of the good biocompatibility and in vivo therapeutic mechanisms, they are expected to become an advancing biomedicine in the field of tumor diagnosis and treatment.

Calcium-based biomaterials: Unveiling features and expanding applications in osteosarcoma treatment

Calcium, an indispensable element in bone tissues, plays a crucial role in various cellular processes involved in cancer progression. Its ubiquitous yet spatially distinct distribution in the body presents an opportunity to target calcium homeostasis as a novel strategies for cancer treatment, with specific advantages in osteosarcoma therapy. In this comprehensive review, we retrospect the calcium biology intersected with cancer progression, highlight the unveiling features of calcium-based biomaterials in regulating both bone homeostasis and cancer development. We also provide an overview of recent breakthroughs in cancer therapy that leverage calcium biomaterials, showcasing their potential to serve as versatile, customizable platforms for osteosarcoma treatment and as reservoirs for supporting bone reconstruction.

Microfluidically Assisted Synthesis of Calcium Carbonate Submicron Particles with Improved Loading Properties

The development of advanced methods for the synthesis of nano- and microparticles in the field of biomedicine is of high interest due to a range of reasons. The current synthesis methods may have limitations in terms of efficiency, scalability, and uniformity of the particles. Here, we investigate the synthesis of submicron calcium carbonate using a microfluidic chip with a T-shaped oil supply for droplet-based synthesis to facilitate control over the formation of submicron calcium carbonate particles. The design of the chip allowed for the precise manipulation of reaction parameters, resulting in improved porosity while maintaining an efficient synthesis rate. The pore size distribution within calcium carbonate particles was estimated via small-angle X-ray scattering. This study showed that the high porosity and reduced size of the particles facilitated the higher loading of a model peptide: 16 vs. 9 mass.% for the particles synthesized in a microfluidic device and in bulk, correspondingly. The biosafety of the developed particles in the concentration range of 0.08-0.8 mg per plate was established by the results of the cytotoxicity study using mouse fibroblasts. This innovative approach of microfluidically assisted synthesis provides a promising avenue for future research in the field of particle synthesis and drug delivery systems.

Current appraises of therapeutic applications of nanocurcumin: A novel drug delivery approach for biomaterials in dentistry

Curcumin is a natural herb and polyphenol that is obtained from the medicinal plant Curcuma longa. It's anti-bacterial, anti-inflammatory, anti-cancer, anti-mutagenic, antioxidant and antifungal properties can be leveraged to treat a myriad of oral and systemic diseases. However, natural curcumin has weak solubility, limited bioavailability and undergoes rapid degradation, which severely limits its therapeutic potential. To overcome these drawbacks, nanocurcumin (nCur) formulations have been developed for improved biomaterial delivery and enhanced treatment outcomes. This novel biomaterial holds tremendous promise for the treatment of various oral diseases, the majority of which are caused by dental biofilm. These include dental caries, periodontal disease, root canal infection and peri-implant diseases, as well as other non-biofilm mediated oral diseases such as oral cancer and oral lichen planus. A number of in-vitro studies have demonstrated the antibacterial efficacy of nCur in various formulations against common oral pathogens such as S. mutans, P. gingivalis and E. faecalis, which are strongly associated with dental caries, periodontitis and root canal infection, respectively. In addition, some clinical studies were suggestive of the notion that nCur can indeed enhance the clinical outcomes of oral diseases such as periodontitis and oral lichen planus, but the level of evidence was very low due to the small number of studies and the methodological limitations of the available studies. The versatility of nCur to treat a diverse range of oral diseases augurs well for its future in dentistry, as reflected by rapid pace in which studies pertaining to this topic are published in the scientific literature. In order to keep abreast of the latest development of nCur in dentistry, this narrative review was undertaken. The aim of this narrative review is to provide a contemporaneous update of the chemistry, properties, mechanism of action, and scientific evidence behind the usage of nCur in dentistry.

Polyethylenimine-CO2 adduct templated CaCO3 nanoparticles as anticancer drug carrier

Background

Due to their porous structure and capability to degrade under acidic conditions, CaCO3 nanoparticles in vaterite form can be used as carriers to effectively deliver drugs to low-pH sites such as tumors. The usually used intravenous administration requires long-term vaterite phase and colloidal stability for storage and blood circulation. While passive accumulation in tumors can be achieved via the enhanced permeation and retention effect, active accumulation requires reactive groups on vaterite nanoparticles to conjugate targeting molecules. Both requirements are hard to achieve in one simple and economical vaterite formulation. Herein, we used polyethylenimine (PEI)-based CO2 adduct as both a CO2 source and a template for vaterite mineralization to generate PEI-CO2@CaCO3 colloidal particles, with reactive amino groups from the PEI template.

Results

The obtained nanoparticles with a hydrodynamic diameter of 200–300 nm have a vaterite phase and colloidal stability in an aqueous solution for over 8 months. These nanoparticles could effectively load anticancer drug doxorubicin via coprecipitation and be surface-modified with polyethylene glycol (PEG) and folic acid for long-term blood circulation and tumor targeting purposes, respectively. After being endocytosed, the PEI-CO2 adduct accelerates the dissolution of drug-loaded nanoparticles to generate CO2 bubbles to break the lysosomes, leading to rapid doxorubicin delivery inside tumor cells. The degradation of PEI-CO2 in the CaCO3 nanoparticles could also release PEI and CO2 and may contribute to the disruption of normal cellular functions. As a result, the drug-loaded PEI-CO2@CaCO3 nanoparticles strongly suppressed tumor growth in mice with HeLa tumor xenografts.

Conclusions

A new and effective vaterite drug carrier for anticancer therapy has been developed using PEI-CO2 adduct as both a CO2 source and vaterite template for CaCO3 mineralization. This delivery system illustrates an application of CO2 generation materials in drug delivery and has the potential for further development.

Antilipogenesis Effect of Rutin-Loaded Liposomes Using a Microneedle Delivery System

Rutin, a flavonoid glycoside phytochemical compound, has a remarkable antiobesity effect. However, its therapeutic potential is hindered by its poor water solubility and low oral bioavailability. In this study, rutin was loaded into liposomes (LR) through the self-assembly of lecithin and cholesterol. It was discovered that liposomes improved the water solubility and cellular uptake of rutin in adipocytes. These rutin-loaded liposomes were then incorporated into a microneedle patch (MP) system formed by polyvinylpyrrolidone and poly(vinyl alcohol), and the MP-LR showed an increased release percentage in the adipose tissue microenvironment of pH 6.5 and achieved local delivery of rutin into adipocytes. Next, the therapeutic potentials of rutin, LR, and MP-LR were investigated in a high-fat diet (HFD)-induced obese mouse model. The MP-LR formulation decreased the weight of the HFD mice the most significantly. The antilipogenesis mechanisms of MP-LR are downregulating the lipid synthesis-related proteins (PPAR γ and C/EBP α) in adipocytes and promoting the expression of the beige adipogenesis-related proteins (UCP 1 and Cyt C). The MP systems further promote the local penetration of LR into the adipose tissue specifically, which again elevates their antiobesity effect. Overall, this study suggests that MP-delivered liposome-based formulation is a promising approach to enhance the antiobesity efficacy of antilipogenesis bioactive compounds.

Characterization and Exploration of Placket-Burman-Designed Porous Calcium Carbonate (Vaterite) Microparticles

The objective of the research was to identify significant variables that impact the porosity-related properties of CaCO3 particles. The Placket-Burman design was employed to screen multiple variables, including pH, molar concentrations of calcium chloride and sodium carbonate, temperature, concentration of Gelucire 44/14, Cremophor RH40, Solutol HS15, Labrasol, mixing rate, reaction time, and order of addition. The response variables were surface area, pore radius, and pore volume. Influential methodologies such as XRD, FTIR, Raman spectroscopy, and TGA were utilized to validate the precipitate type. The BET surface area ranged from 1.5 to 16.14 m2/g, while the pore radius varied from 2.62 to 6.68 nm, and the pore volume exhibited a range of 2.43 to 37.97 cc/gm. Vaterite structures with spherical mesoporous characteristics were observed at high pH, whereas calcite formations occurred at low pH. The order of addition impacted the surface area but did not affect the pore volume. To maximize the surface area, a lower reaction time and molar concentrations of sodium carbonate were found to be advantageous. The pore radius was influenced by the pH, surfactants, and reaction conditions. The sediments were categorized based on the percentage of vaterite formation. The instrumental techniques effectively characterized the precipitates and provided a valuable complementary analysis.

Exploiting Benefits of Vaterite Metastability to Design Degradable Systems for Biomedical Applications

The widespread application of calcium carbonate is determined by its high availability in nature and simplicity of synthesis in laboratory conditions. Moreover, calcium carbonate possesses highly attractive physicochemical properties that make it suitable for a wide range of biomedical applications. This review provides a conclusive analysis of the results on using the tunable vaterite metastability in the development of biodegradable drug delivery systems and therapeutic vehicles with a controlled and sustained release of the incorporated cargo. This manuscript highlights the nuances of vaterite recrystallization to non-porous calcite, dissolution at acidic pH, biodegradation at in vivo conditions and control over these processes. This review outlines the main benefits of vaterite instability for the controlled liberation of the encapsulated molecules for the development of biodegradable natural and synthetic polymeric materials for biomedical purposes.

Facile construction of drugs loaded lipid-coated calcium carbonate as a promising pH-Dependent drug delivery system for thyroid cancer treatment

To develop innovative drug delivery carriers for controllable release and cancer-targeted delivery of therapeutic agents to accomplish efficient cancer chemotherapy. Herein we effectively fabricated CaCO3 primarily loaded biotin (BT) and directly the self-assembly of oxaliplatin (Pt (IV)) prodrugs form in liposomes. The acquired BT-Pt (IV)@PEG/CaCO3 with outstanding biological stability displays rapid pH-mediated degradations, thus allowing the effective pH-responsive delivery of BT. In vitro, anticancer assays proved that BT-Pt (IV)@PEG/CaCO3 effectively kills the thyroid cancer cells (B-CPAP and FTC-133). The biochemical staining assays investigated the morphological changes of thyroid cancer after treatment with nanoparticles. The DNA fragmentation of the cells was assessed by utilizing the comet assay. BT-Pt (IV)@PEG/CaCO3 increased ROS levels and caused mitochondrial membrane potential and DNA damage, which resulted in apoptosis. Due to its versatile drug-loading capability, this research demonstrates that CaCO3 liposomal formulation is a biocompatible and reliable substrate for establishing pH-mediated drug delivery methods and promising for possible therapeutic application.

Fabrication of Ag-CaCO3 Nanocomposites for SERS Detection of Forchlorfenuron

In this study, Ag-CaCO3 nanocomposites were synthesized using silver nitrate as the precursor solution based on calcium carbonate nanoparticles (CaCO3 NPs). The synthesis involved the reaction of calcium lignosulphonate and sodium bicarbonate. The properties of Ag-CaCO3 nanocomposites were studied by various technologies, including an ultraviolet-visible spectrophotometer, a transmission electron microscope, and a Raman spectrometer. The results showed that Ag-CaCO3 nanocomposites exhibited a maximum UV absorption peak at 430 nm, the surface-enhanced Raman spectroscopy (SERS) activity of Ag-CaCO3 nanocomposites was evaluated using mercaptobenzoic acid (MBA) as the marker molecule, resulting in an enhancement factor of 6.5 × 104. Additionally, Ag-CaCO3 nanocomposites were utilized for the detection of forchlorfenuron. The results demonstrated a linear relationship in the concentration range of 0.01 mg/mL to 2 mg/mL, described by the equation y = 290.02x + 1598.8. The correlation coefficient was calculated to be 0.9772, and the limit of detection (LOD) was determined to be 0.001 mg/mL. These findings highlight the relatively high SERS activity of Ag-CaCO3 nanocomposites, making them suitable for analyzing pesticide residues and detecting toxic and harmful molecules, thereby contributing to environmental protection.

Nanoparticle-Embedded Polymers and Their Applications: A Review

There has been increasing interest in the study and development of nanoparticle-embedded polymeric materials and their applications to special membranes. Nanoparticle-embedded polymeric materials have been observed to have a desirable compatibility with commonly used membrane matrices, a wide range of functionalities, and tunable physicochemical properties. The development of nanoparticle-embedded polymeric materials has shown great potential to overcome the longstanding challenges faced by the membrane separation industry. One major challenge that has been a bottleneck to the progress and use of membranes is the balance between the selectivity and the permeability of the membranes. Recent developments in the fabrication of nanoparticle-embedded polymeric materials have focused on how to further tune the properties of the nanoparticles and membranes to improve the performance of the membranes even further. Techniques for improving the performance of nanoparticle-embedded membranes by exploiting their surface characteristics and internal pore and channel structures to a significant degree have been incorporated into the fabrication processes. Several fabrication techniques are discussed in this paper and used to produce both mixed-matrix membranes and homogenous nanoparticle-embedded polymeric materials. The discussed fabrication techniques include interfacial polymerization, self-assembly, surface coating, and phase inversion. With the current interest shown in the field of nanoparticle-embedded polymeric materials, it is expected that better-performing membranes will be developed soon.

The Antibacterial Effect of Ciprofloxacin Loaded Calcium Carbonate (CaCO3) Nanoparticles Against the Common Bacterial Agents of Osteomyelitis

The present study aimed to investigate the biocompatibility, antibacterial/anti-biofilm effects of ciprofloxacin-loaded calcium carbonate (Cip- loaded CaCO₃) nanoparticles against the common organisms responsible for osteomyelitis. The antibacterial and biofilm inhibitory activities were studied by determination of minimum inhibitory concentrations (MICs) and minimum biofilm inhibitory concentrations (MBICs), respectively. Hemolytic effects were determined for studying hemocompatibility. The SDS-PAGE method was used to study the interaction of Cip- loaded CaCO₃ with plasma proteins. The effects of Cip- loaded CaCO₃ on the cell viability of human bone marrow mesenchymal stem cells (hBM-MSCs) was detected. The Cip- loaded CaCO₃ nanoparticles were shown a significant antimicrobial effect at lower concentrations than free ciprofloxacin. No significant hemolytic effect was observed. The Cip- loaded CaCO₃ nanoparticles have shown interaction with apolipoprotein A1 (28 kDa) and albumin (66.5 kDa). The viability of hBM-MSCs treated with Cip- loaded CaCO₃ was more than 96%. Our results indicated that Cip-loaded CaCO₃ nanoparticles had favorable in vitro compatibility with human red blood cells, antimicrobial effects, and low cytotoxicity.

Green synthesis of CaCO3 nanoparticles for photocatalysis and cytotoxicity

In this study, Gum Arabic natural polymer was used to green synthesize calcium carbonate nanoparticles (CaCO₃-NPs). Synthesized CaCO₃-NPs were identified using various analyses such as FTIR, XRD, FESEM, EDX, and UV-Vis. The UV spectrum of nanoparticles showed an absorption band at a wavelength of 320 nm. FTIR analysis also confirmed the synthesis of nanoparticles. XRD studies showed that CaCO₃-NPs have a rhombohedral crystalline structure with space group R-3c and an average size of about 42 nm. FESEM images showed that CaCO₃-NPs have cubic morphology and EDX results confirmed the presence of carbon, calcium, and oxygen elements. The synthesized CaCO₃-NPs showed good photocatalytic activity to methylene blue (MB) dye degradation, which percentage degradation was 93% after 120 min. Also, the cytotoxicity of CaCO₃-NPs has been examined on the normal L929 and cancer CT26 cell lines and the IC₅₀ value was about 250 µg/mL for cancer cells.

Antibacterial and biofilm-inhibitory effects of vancomycin-loaded mesoporous silica nanoparticles on methicillin-resistant staphylococcus aureus and gram-negative bacteria

The present study aimed to prepare and characterize vancomycin-loaded mesoporous silica nanoparticles (Van-MSNs) to detect inhibitory effects on the planktonic and biofilm forms of methicillin-resistant Staphylococcus aureus (MRSA) isolates, and study the biocompatibility and toxicity of Van-MSNs in vitro as well as antibacterial activity of Van-MSNs against Gram-negative bacteria. The inhibitory effects of Van-MSNs were investigated on MRSA using the determination of minimum inhibitory (MIC) and minimum biofilm-inhibitory concentrations (MBIC) as well as the effect on bacterial attachment. Biocompatibility was studied by examining the effect of Van-MSNs on the lysis and sedimentation rate of red blood cells (RBC). The interaction of Van-MSNs with human blood plasma was detected by the SDS-PAGE approach. The cytotoxic effect of the Van-MSNs on human bone marrow mesenchymal stem cells (hBM-MSCs) was evaluated by the MTT assay. The antibacterial effects of vancomycin and Van-MSNs on Gram-negative bacteria were also investigated using MIC determination using the broth microdilution method. Furthermore, bacteria outer membrane (OM) permeabilization was determined. Van-MSNs showed inhibitory effects on planktonic and biofilm forms of bacteria on all isolates at levels lower than MICs and MBICs of free vancomycin, but the antibiofilm effect of Van-MSNs was not significant. However, Van-MSNs did not affect bacterial attachment to surfaces. Van-loaded MSNs did not show a considerable effect on the lysis and sedimentation of RBC. A low interaction of Van-MSNs was detected with albumin (66.5 kDa). The hBM-MSCs viability in exposure to different levels of Van-MSNs was 91-100%. MICs of ≥ 128 µg/mL were observed for vancomycin against all Gram-negative bacteria. In contrast, Van-MSNs exhibited modest antibacterial activity inhibiting the tested Gram-negative bacterial strains, at concentrations of ≤ 16 µg/mL. Van-MSNs increased the OM permeability of bacteria that can increase the antimicrobial effect of vancomycin. According to our findings, Van-loaded MSNs have low cytotoxicity, desirable biocompatibility, and antibacterial effects and can be an option for the battle against planktonic MRSA.

pH-Responsible Doxorubicin-Loaded Fe3O4@CaCO3 Nanocomposites for Cancer Treatment

A magnetic nanocomposite (MNC) is an integrated nanoplatform that combines a set of functions of two types of materials. A successful combination can give rise to a completely new material with unique physical, chemical, and biological properties. The magnetic core of MNC provides the possibility of magnetic resonance or magnetic particle imaging, magnetic field-influenced targeted delivery, hyperthermia, and other outstanding applications. Recently, MNC gained attention for external magnetic field-guided specific delivery to cancer tissue. Further, drug loading enhancement, construction stability, and biocompatibility improvement may lead to high progress in the area. Herein, the novel method for nanoscale Fe3O4@CaCO3 composites synthesis was proposed. For the procedure, oleic acid-modified Fe3O4 nanoparticles were coated with porous CaCO3 using an ion coprecipitation technique. PEG-2000, Tween 20, and DMEM cell media was successfully used as a stabilization agent and template for Fe3O4@CaCO3 synthesis. Transmission electron microscopy (TEM), Fourier transform infrared (FTIR) spectroscopy, and dynamic light scattering (DLS) data were used for the Fe3O4@CaCO3 MNC’s characterization. To improve the nanocomposite properties, the concentration of the magnetic core was varied, yielding optimal size, polydispersity, and aggregation ability. The resulting Fe3O4@CaCO3 had a size of 135 nm with narrow size distributions, which is suitable for biomedical applications. The stability experiment in various pH, cell media, and fetal bovine serum was also evaluated. The material showed low cytotoxicity and high biocompatibility. An excellent anticancer drug doxorubicin (DOX) loading of up to 1900 µg/mg (DOX/MNC) was demonstrated. The Fe3O4@CaCO3/DOX displayed high stability at neutral pH and efficient acid-responsive drug release. The series of DOX-loaded Fe3O4@CaCO3 MNCs indicated effective inhibition of Hela and MCF-7 cell lines, and the IC 50 values were calculated. Moreover, 1.5 μg of the DOX-loaded Fe3O4@CaCO3 nanocomposite is sufficient to inhibit 50% of Hela cells, which shows a high prospect for cancer treatment. The stability experiments for DOX-loaded Fe3O4@CaCO3 in human serum albumin solution indicated the drug release due to the formation of a protein corona. The presented experiment showed the “pitfalls” of DOX-loaded nanocomposites and provided step-by-step guidance on efficient, smart, anticancer nanoconstruction fabrication. Thus, the Fe3O4@CaCO3 nanoplatform exhibits good performance in the cancer treatment area.

Silencing CircEIF3I/miR-526b-5p Axis Epigenetically Targets HGF/c-Met Signal to Hinder the Malignant Growth, Metastasis and Angiogenesis of Hepatocellular Carcinoma

BACKGROUND

Hepatocyte growth factor (HGF)/c-mesenchymal-epithelial transition factor (c-Met) is important for the diagnosis and prognosis of hepatocellular carcinoma (HCC). Circular RNAs (circRNAs) are key regulators of HCC progression, and this study focused on circRNA eukaryotic translation initiation factor 3 subunit I (circEIF3I) with HGF/c-Met in HCC.

METHODS

Levels of circEIF3I, microRNA (miR)-526b-5p, HGF, E-cadherin, N-cadherin, and Vimentin were detected by Gene Expression Omnibus database, quantitative PCR and western blotting. Cell functions were measured by detecting cell growth (cell proliferation assay with WST-1 and EdU, colony formation assay, flow cytometry, caspase 3 activity assay, and nude mouse tumorigenicity assay), metastasis (transwell assay and western blotting), angiogenesis (endothelial tube formation assay). Molecular interaction was determined dual-luciferase reporter assay, RNA immunoprecipitation, and Pearson correlation analysis.

RESULTS

Expression of circEIF3I was upregulated in HCC tissues. Knockdown of circEIF3I suppressed cell proliferation epithelial-mesenchymal transition, migration, invasion and tube formation ability but promoted apoptosis of HCC cells. CircEIF3I could sponge miR-526b-5pto regulate downstream HGF. Functionally, circEIF3I regulation in HCC cell progression was associated with miR-526b-5p sponging function and HGF upregulation could attenuate tumor-inhibiting roles of miR-526b-5p. HCC tumor growth was delayed by interfering circEIF3I.

CONCLUSION

CircEIF3I was an oncogenic circRNA in HCC-, and interfering circEIF3I exhibited anti-HCC activity via circEIF3I-miR-526b-5p-HGF/c-Met pathway.

Gelatin-hydroxyapatite Fibrous Nanocomposite for Regenerative Dentistry and bone Tissue Engineering

Aims:

This study aimed to prepare and physicochemically evaluate as well as assess the cytotoxicity and stimulation of early osteogenic differentiation of dental pulp stem cells of gelatin-hydroxyapatite (Gel-HA) fibrous nanocomposite scaffold.

Background:

Recently, the electrospinning approach in nanotechnology has been considered due to its application in the preparation of biomimetic nanofibers for tissue engineering.

Objective:

The main objective of this study was to evaluate Gel-HA fibrous nanocomposite for regenerative dentistry and bone tissue engineering material.

Methods:

The nano-scaffold was prepared via the electrospinning method. Then, the physicochemical properties (particle size, surface charge, morphology, hydrophilicity, specific surface area, crystalline state and the characterization of functional groups) and the proliferative effects of nano-scaffolds on dental pulp stem cells were assessed. The alkaline phosphatase activity was assessed for evaluation of early osteogenic differentiation of dental pulp stem cells.

Results:

The prepared nano-scaffolds had a negative surface charge (-30 mv±1.3), mono-dispersed nano-scale diameter (98 nm±1.2), crystalline state and fibrous uniform morphology without any bead (structural defects). The nanofibrous scaffold showed increased hydrophobicity compared to gelatin nanofibers. Based on Brunauer-Emmett-Teller analysis, the specific surface area, pore volume and pore diameter of Gel-HA nanofibers decreased compared to gelatin nanofibers. The Gel-HA nano-fibers showed the proliferative effect and increased the alkaline phosphatase activity of cells significantly (P<0.05).

Conclusion:

The prepared Gel-HA nanofibers can be considered potential candidates for application in bone tissue engineering and regenerative dentistry.

Other:

Gel-HA nanofibers could be a potential material for bone regeneration and regenerative dentistry in the near future.

Advances in Antitumor Nano-Drug Delivery Systems of 10-Hydroxycamptothecin

10-Hydroxycamptothecin (HCPT) is a natural plant alkaloid from Camptotheca that shows potent antitumor activity by targeting intracellular topoisomerase I. However, factors such as instability of the lactone ring and insolubility in water have limited the clinical application of this drug. In recent years, unprecedented advances in biomedical nanotechnology have facilitated the development of nano drug delivery systems. It has been found that nanomedicine can significantly improve the stability and water solubility of HCPT. NanoMedicines with different diagnostic and therapeutic functions have been developed to significantly improve the anticancer effect of HCPT. In this paper, we collected reports on HCPT nanomedicines against tumors in the past decade. Based on current research advances, we dissected the current status and limitations of HCPT nanomedicines development and looked forward to future research directions.

Calcium carbonate: controlled synthesis, surface functionalization, and nanostructured materials

Calcium carbonate (CaCO₃) is an important inorganic mineral in biological and geological systems. Traditionally, it is widely used in plastics, papermaking, ink, building materials, textiles, cosmetics, and food. Over the last decade, there has been rapid development in the controlled synthesis and surface modification of CaCO₃, the stabilization of amorphous CaCO₃ (ACC), and CaCO₃-based nanostructured materials. In this review, the controlled synthesis of CaCO₃ is first examined, including Ca²⁺-CO₃^2- systems, solid-liquid-gas carbonation, water-in-oil reverse emulsions, and biomineralization. Advancing insights into the nucleation and crystallization of CaCO₃ have led to the development of efficient routes towards the controlled synthesis of CaCO₃ with specific sizes, morphologies, and polymorphs. Recently-developed surface modification methods of CaCO₃ include organic and inorganic modifications, as well as intensified surface reactions. The resultant CaCO₃ can then be further engineered via template-induced biomineralization and layer-by-layer assembly into porous, hollow, or core-shell organic-inorganic nanocomposites. The introduction of CaCO₃ into nanostructured materials has led to a significant improvement in the mechanical, optical, magnetic, and catalytic properties of such materials, with the resultant CaCO₃-based nanostructured materials showing great potential for use in biomaterials and biomedicine, environmental remediation, and energy production and storage. The influences that the preparation conditions and additives have on ACC preparation and stabilization are also discussed. Studies indicate that ACC can be used to construct environmentally-friendly hybrid films, supramolecular hydrogels, and drug vehicles. Finally, the existing challenges and future directions of the controlled synthesis and functionalization of CaCO₃ and its expanding applications are highlighted.

Next-Generation Colloidal Materials for Ultrasound Imaging Applications

Ultrasound has important applications, predominantly in the field of diagnostic imaging. Presently, colloidal systems such as microbubbles, phase-change emulsion droplets and particle systems with acoustic properties and multiresponsiveness are being developed to address typical issues faced when using commercial ultrasound contrast agents, and to extend the utility of such systems to targeted drug delivery and multimodal imaging. Current technologies and increasing research data on the chemistry, physics and materials science of new colloidal systems are also leading to the development of more complex, novel and application-specific colloidal assemblies with ultrasound contrast enhancement and other properties, which could be beneficial for multiple biomedical applications, especially imaging-guided treatments. In this article, we review recent developments in new colloids with applications that use ultrasound contrast enhancement. This work also highlights the emergence of colloidal materials fabricated from or modified with biologically derived and bio-inspired materials, particularly in the form of biopolymers and biomembranes. Challenges, limitations, potential developments and future directions of these next-generation colloidal systems are also presented and discussed.

Calcium carbonate vaterite particles for drug delivery: Advances and challenges

The recent successful application of lipid-based nanoparticles as delivery vehicles in COVID-19 vaccines demonstrated the superior potential of nanoparticle-based technology for targeted drug delivery in biomedicine. Among novel, rapidly advancing delivery platforms, the inorganic nano/microparticles gradually reach new heights and attract well-deserved attention among scientists and clinicians. Calcium carbonate in its vaterite form is used as a biocompatible carrier for a progressively increasing number of biomedical applications. Its growing popularity is conferred by beneficial porosity of particles, high mechanical stability, biodegradability under certain physiological conditions, ability to provide a continuous steady release of bioactives, preferential safety profile, and low cost, which make calcium carbonate a suitable entity of highly efficacious formulations for controlled drug delivery and release. The focal point of the current review is the success of the recent vaterite applications in the delivery of various diagnostics and therapeutic drugs. The manuscript highlights the nuances of drug loading in vaterite particles, connecting it with particle morphology, size, and charge of the loaded molecules, payload concentration, mono- or multiple drug loading. The manuscript also depicts recent successful methods of increasing the loading capacity developed for vaterite carriers. In addition, the review describes the various administration routes for vaterite particles with bioactive payloads, which were reported in recent years. Special attention is given to the multi-drug-loaded vaterite particles ("molecular cocktails") and reports on their successful delivery in vitro and in vivo.

A Polyplex in a Shell: The Effect of Poly(aspartic acid)-Mediated Calcium Carbonate Mineralization on Polyplexes Properties and Transfection Efficiency

Mineralization by exposure of organic templates to supersaturated solutions is used by many living organisms to generate specialized materials to perform structural or protective functions. Similarly, it was suggested that improved robustness acquired through mineralization under natural conditions could be an important factor for virus survival outside of a host for better transfection of cells. Here, inspired by this fact, we developed a nonviral tricomponent polyplex system for gene delivery capable of undergoing mineralization. First, we fabricated anionic polyplexes carrying pDNA by self-assembly with a lipid-modified cationic polymer and coating by poly(aspartic acid). Then, we submitted the polyplexes to a two-step mineralization reaction to precipitate CaCO₃ under various supersaturations. We carried out detailed morphological studies of the mineralized polyplexes and identified which parameters of the fabrication process were influential on transfection efficiency. We found that mineralization with CaCO₃ is efficient in promoting transfection efficiency as long as a certain Ca²⁺/CO₃^2- lower limit ratio is respected. However, calcium incubation can also be used to achieve similar effects at higher concentrations depending on polyplex composition, probably due to the formation of physical cross-links by calcium binding to poly(aspartic acid). We proposed that the improved robustness and transfection efficiency provided by means of mineralization can be used to expand the possible applications of polyplexes in gene therapy.

Effect of Adding Silica Nanoparticles on the Physicochemical Properties, Antimicrobial Action, and the Hardness of Dental Stone Type 4

This study was conducted to investigate the effect of adding silica nanoparticles on the physicochemical properties, antimicrobial action, and the hardness of dental stone type 4. Dental stone type 4 powder was physically mixed with nanoparticle powder at weight percentages (0, 0.5, 1, and 2 percent). The required amount of powder was added to water according to the manufacturer's instructions. The prepared set materials were subjected to the physicochemical studies; Fourier transmission infrared spectroscopy (FTIR) was taken up to investigate the functional groups and X-ray diffraction (XRD) was used to evaluate the crystallinity. Also, scanning electron microscopy (SEM) was used to examine the morphology of the prepared samples. Agar diffusion test was carried out for the prepared samples against the Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) to test the average growth inhibition zones. Finally, the Vickers surface hardness test was performed for each group using a hardness tester. The adding silica nanoparticles to dental stone type 4 increased the diameter of inhibition zones for the groups in both bacteria significantly (p < 0.05). The results showed that adding silica nanoparticles to dental stone type 4 increased the diameter of inhibition zones for the groups in both bacteria significantly (p < 0.0001). There was a significant difference between all groups and the 0% group in both bacteria (p < 0.0001). Besides, the adding of silica nanoparticles to dental stone type 4 increased the surface hardness significantly (p = 0.0057) without any effect on physicochemical properties. The 0% and the 0.5% groups had significant differences with the 2% group (p = 0.0046 and p = 0.0205 respectively). Then, at least 2% silica nanoparticles are needed for a significant increase. Clinical trials are needed to enlarge for dental stone type 4 containing silica nanoparticles in the future.

Safety issues of nanomaterials for dermal pharmaceutical products

Nanomaterials (NMs) have favorable application in the medicine area, specifically in regard to the carry of pharmaceutical ingredients to provide targeted drug delivery systems. The skin is an excellent route for the delivery of pharmaceutical nano-transporters for skin-related applications. The physicochemical properties of nanomaterials such as size, hydrophobicity, loading capacity, charge and weight are vital for a skin penetrating system. Many nanocarriers such as polymeric nanoparticles, inorganic nanomaterials and, lipid nanostructures have been utilized for dermal delivery of active ingredients and others such as carbon nanotubes and fullerenes require more examination for future application in the skin-related area. Some negative side effects and nano-cytotoxicity of nanomaterials require special attention while investigating different nanomaterials for medicinal applications. Then, in the current review, we had a view on the safety issues of nanomaterials for dermal pharmaceutical products.