Highly selective and sensitive methanol gas sensor based on molecular imprinted silver-doped LaFeO3 core-shell and cage structures

La-Fe-O Perovskite Based Gas Sensors: Recent Advances and Future Challenges

Interest in the importance of gas sensing devices has increased significantly due to their critical function in monitoring the environment and controlling pollution, resulting in an increased market demand. The present review explores perovskite La-Fe-O based gas sensors with a special focus on LaFeO3 and evaluates their sensitivity to a diverse range of practical target gases that need to be monitored. An analysis has been conducted to assess different routes not only of synthesizing LaFeO3 material but also of characterization with the targeted use for their gas sensing abilities. Additionally, a comprehensive analysis has been performed to explore the effect of introducing other elements through doping. In view of the LaFeO3 sensing performance, more common gases like acetone, ethanol, methanol, formaldehyde, NO x , and CO2 have been targeted. In addition, a discussion on uncommon gases such as CO, SO2, TEA, C2H5, C6H6, and others is also made to give a complete picture of LaFeO3-based gas sensors. The summary and conclusion section of the study addresses the primary obstacles in the synthesis process, the variables that restrict the sensing capabilities of LaFeO3, and its commercial fulfillment.

Molecularly imprinted polymers for sensing gaseous volatile organic compounds: opportunities and challenges

Chemical sensors that can detect volatile organic compounds (VOCs) are the subject of extensive research efforts. Among various sensing technologies, molecularly imprinted polymers (MIPs) are regarded as a highly promising option for their detection with many advantageous properties, e.g., specific binding-site for template molecules, high recognition specificity, ease of preparation, and chemical stability. This review covers recent advances in the sensing application of MIPs toward various types of VOCs (e.g., aliphatic and aromatic compounds). Particular emphasis has been placed on multiple approaches to the synthesis of MIP-based VOC sensors in association with their performance and sensing mechanisms. Current challenges and opportunities for new VOC-sensing applications are also discussed based on MIP technology.

Template Imprinting Versus Porogen Imprinting of Small Molecules: A Review of Molecularly Imprinted Polymers in Gas Sensing

The selective sensing of gaseous target molecules is a challenge to analytical chemistry. Selectivity may be achieved in liquids by several different methods, but many of these are not suitable for gas-phase analysis. In this review, we will focus on molecular imprinting and its application in selective binding of volatile organic compounds and atmospheric pollutants in the gas phase. The vast majority of indexed publications describing molecularly imprinted polymers for gas sensors and vapour monitors have been analysed and categorised. Specific attention was then given to sensitivity, selectivity, and the challenges of imprinting these small volatile compounds. A distinction was made between porogen (solvent) imprinting and template imprinting for the discussion of different synthetic techniques, and the suitability of each to different applications. We conclude that porogen imprinting, synthesis in an excess of template, has great potential in gas capture technology and possibly in tandem with more typical template imprinting, but that the latter generally remains preferable for selective and sensitive detection of gaseous molecules. More generally, it is concluded that gas-phase applications of MIPs are an established science, capable of great selectivity and parts-per-trillion sensitivity. Improvements in the fields are likely to emerge by deviating from standards developed for MIP in liquids, but original methodologies generating exceptional results are already present in the literature.

Pt Single Atom-Induced Activation Energy and Adsorption Enhancement for an Ultrasensitive ppb-Level Methanol Gas Sensor

As an important organic chemical raw material, methanol is used in various industries but is harmful to human health. Developing an effective and accurate detection device for methanol is an urgent need. Herein, we demonstrate a novel gas-sensing material with a Pt single atom supported on a porous Ag-LaFeO₃@ZnO core-shell sphere (Ag-LaFeO₃@ZnO-Pt) with a high specific surface area (192.08 m²·g^-1). Based on this, the surface activity of the Ag-LaFeO₃@ZnO-Pt gas sensor is enhanced obviously, which improved the working temperature and detection limit for methanol gas. Consequently, this sensor possesses an ultrahigh sensitivity of 453.02 for 5 ppm methanol gas at a working temperature of 86 °C and maintains a high sensitivity of 21.25 even at a concentration as low as 62 ppb. The sensitivity of Ag-LaFeO₃@ZnO-Pt to methanol gas is increased by 6.69 times compared with the Ag-LaFeO₃@ZnO core-shell sphere (Ag-LaFeO₃@ZnO). Additionally, the minimum detection limit is found to be 3.27 ppb. Detailed theoretical calculations revealed that the unoccupied 5d state of Pt single atoms increases the adsorption and activation energy of methanol and oxygen, which facilities methanol gas-sensing performance. This work will provide a novel strategy to design high-performance gas-sensing materials.

Improving the Identification of Lysine-Acetylated Peptides Using a Molecularly Imprinted Monolith Prepared by a Deep Eutectic Solvent Monomer

To overcome the identification challenge of low-abundance lysine acetylation (Kac), a novel approach based on a molecularly imprinted polymer (MIP) was developed to improve the extraction capacity of Kac peptides in real samples. Green deep eutectic solvents (DESs) were introduced and used as one of the synergistic functional monomers with zinc acrylate (ZnA). Glycine-glycine-alanine-lysine(ac)-arginine (GGAKacR) was chosen as a template and N,N'-methylenbisacrylamide (MBAA) was used as a cross-linker. The obtained GGAKacR-MIP had excellent selectivity for the template with an imprinting factor (IF) of up to 21.4. The histone digest addition experiment demonstrated that GGAKacR-MIP could successfully extract GGAKacR from a complex sample. Finally, the application to the extraction of Kac peptides from mouse liver protein digestion was studied in detail. The number of Kac peptides and Kac proteins identified was 130 and 110, which were 3.71-fold and 3.93-fold higher than those of the untreated sample. In addition, the number of peptides and proteins identified after treatment increased from 5535 and 1092 to 17 149 and 4037 (3.10-fold and 3.70-fold, respectively). The results showed that the obtained MIP may provide an effective technical tool for the identification of Kac-modification and peptide fractionation, as well as a potential approach for simultaneously identifying post-translational-modified proteomic and proteomic information.

Low-operating temperature and remarkably responsive methanol sensors using Pt-decorated hierarchical ZnO structure

Highly responsive methanol sensors working at low temperatures are developed using hierarchical ZnO nanorods decorated by Pt nanoparticles. The sensing materials are fabricated following a 3-step process: electrospinning of ZnO nanofibers, hydrothermal growth of hierarchical ZnO nanorods on the nanofibers and UV-assisted deposition of Pt nanoparticles. The morphology, structure and properties of the materials are examined by field-effect scanning electron microscopy, transmission electron microscope, x-ray diffraction, x-ray photoelectron spectroscopy, UV-Vis absorption spectroscopy, and electrical measurements. The methanol sensing performance is investigated at different working temperatures in the range of 110 °C-260 °C. It is observed that the surface modification of the ZnO hierarchical nanorods by Pt nanoparticles results in a remarkable enhancement of the sensing response toward methanol, which can reach approximately 19 500 times higher than that of the unmodified ZnO nanorods-based sensor. In addition, this modification enables lower working temperatures with an optimum range of 140 °C-200 °C. Based on the achieved results, a methanol sensing mechanism of the Pt/ZnO structure is proposed.

Advanced Strategies to Improve Performances of Molybdenum-Based Gas Sensors

Molybdenum-based materials have been intensively investigated for high-performance gas sensor applications. Particularly, molybdenum oxides and dichalcogenides nanostructures have been widely examined due to their tunable structural and physicochemical properties that meet sensor requirements. These materials have good durability, are naturally abundant, low cost, and have facile preparation, allowing scalable fabrication to fulfill the growing demand of susceptible sensor devices. Significant advances have been made in recent decades to design and fabricate various molybdenum oxides- and dichalcogenides-based sensing materials, though it is still challenging to achieve high performances. Therefore, many experimental and theoretical investigations have been devoted to exploring suitable approaches which can significantly enhance their gas sensing properties. This review comprehensively examines recent advanced strategies to improve the nanostructured molybdenum-based material performance for detecting harmful pollutants, dangerous gases, or even exhaled breath monitoring. The summary and future challenges to advance their gas sensing performances will also be presented.

Thickness effect on VOC sensing properties of sprayed In2S3 films

This work reports the thickness effect on the sensing performances of In₂S₃ material for some Volatile Organic Compounds (VOCs). In₂S₃ films were deposited on glass substrates by the spray pyrolysis technique. Different samples were prepared via changing the spray time in the range of 10–90 min. The film thickness varies from 0.8 μm to 6.1 μm. The X-ray diffraction results demonstrate that the In₂S₃ films are polycrystalline in nature and exhibit a cubic structure. Additionally, Scanning Electron Microscopy (SEM) and 3D profilometry examinations show that the surface roughness increases with the rising spray time. On the other hand, the oxygen adsorption versus working temperature was investigated. Sensing measurements with ethanol, methanol and acetone gases were carried out by a dynamic control of the current passing through the sensitive layers. The best sensitivity was obtained for the film matching a 70 min deposit time. An understanding of the detection mechanism based on the oxidation reaction between reduced vapors and chemisorbed oxygen was confirmed. The selectivity of the sensor was analyzed for several volatile organic compounds (VOCs).

The dynamic response of In₂S₃ films to 4000 ppm of methanol, ethanol and acetone at 350 °C for thicknesses varying from 0.8 μm to 6.1 μm.

Effect of Bi-substitution into the A-site of multiferroic La0.8Ca0.2FeO3 on structural, electrical and dielectric properties

(La_0.8Ca_0.2)_1-x Bi _x FeO₃ (x = 0.00, 0.05, 0.10, 0.15 and 0.20) (LCBFO) multiferroic compounds have been prepared by the sol-gel method and calcined at 800 °C. X-ray diffraction results have shown that all samples crystallise in the orthorhombic structure with the Pnma space group. Electrical and dielectric characterizations of the synthesized materials have been performed using complex impedance spectroscopy techniques in the frequency range from 100 Hz to 1 MHz and in a temperature range from 170 to 300 K. The ac-conductivity spectra have been analysed using Jonscher's power law σ(ω) = σ _dc + Aω ^s , where the power law exponent (s) increases with the temperature. The imaginary part of the complex impedance (Z'') was found to be frequency dependent and shows relaxation peaks that move towards higher frequencies with the increase of the temperature. The relaxation activation energy deduced from the Z'' vs. frequency plots was similar to the conduction activation energy obtained from the conductivity. Hence, the relaxation process and the conduction mechanism may be attributed to the same type of charge carriers. The Nyquist plots (Z'' vs. Z') at different temperatures revealed the appearance of two semi-circular arcs corresponding to grain and grain boundary contributions.

Ultrasensitive xylene gas sensor based on flower-like SnO2/Co3O4 nanorods composites prepared by facile two-step synthesis method

Xylene is a volatile organic compound which is harmful to the human health and requires precise detection. The detection of xylene by an oxide semiconductor gas sensor is an important research direction. In this work, Co₃O₄ decorated flower-like SnO₂ nanorods (SnO₂/Co₃O₄ NRs) were synthesized by a simple and effective two-step method. The SnO₂/Co₃O₄ NRs show high xylene response (R _g/R _a = 47.8 for 100 ppm) and selectivity at the operating temperature of 280 °C, and exhibit high stability in continuous testing. The resulting SnO₂/Co₃O₄ NRs nanocomposites show superior sensing performance towards xylene in comparison with pure SnO₂ nanorods. The remarkable enhancement in the gas-sensing properties of SnO₂/Co₃O₄ NRs are attributed to larger specific surface area and the formation of p-n heterojunction between Co₃O₄ and SnO₂. These results demonstrate that particular nanostructures and synergistic effect of SnO₂ and Co₃O₄ enable gas sensors to selectively detect xylene.

A phenol phosphorescent microsensor of mesoporous molecularly imprinted polymers

Based on the optical quenching phenomenon, a smart mesoporous phosphorescent microsensor was built. It is a phenol microsensor, which inherits a high selectivity of molecularly imprinted polymers (MIPs) and room-temperature phosphorescence (RTP) properties of Mn-doped ZnS quantum dots (QDs). On the surface of silane-modified Mn-doped ZnS QDs, the phenol microsensor was synthesized by a sol–gel process. Because of the presence of a porogenic agent, a mesoporous structure played an important role in increasing the detection sensitivity. The MPTS-modified Mn-doped ZnS QDs were used as solid supports and auxiliary monomers. Under optimal conditions, the experiment for the detection of phenol had a linear range of 5.0 to 50 μmol L⁻¹ with a correlation coefficient of 0.9983 and a high imprinting factor (IF) of 3.28. In addition, the as-prepared Mn-doped ZnS QD@ms-MIPs were successfully applied for phenol determination and selectivity in water samples. Therefore, this study provides a highly selective and sensitive mesoporous phosphorescent microsensor for the detection of phenol.

Based on the optical quenching phenomenon, a smart mesoporous phosphorescent microsensor was built.

A fluorescent microsensor for the selective detection of bifenthrin

Based on the fluorescence quenching phenomenon, a smart fluorescent microsensor was synthesized. The bifenthrin (BI) microsensor inherited the high selectivity of molecular imprinted polymers (MIPs) and the excellent fluorescence properties of aqueous CdTe quantum dots (QDs). Aqueous CdTe QDs are functionalized by octadecyl-4-vinylbenzyl-dimethyl-ammonium chloride (OVDAC). A type of functional monomer, 4-vinylphenylboronic acid (VPBA), was used and its boronic acid groups could covalently combine with a cis-diol compound for direct imprinting polymerization. The OVDAC-functionalized aqueous CdTe QDs were used as solid supports and auxiliary monomers. Under optimal conditions, experimentation showed that BI had a linear detection range of 10 to 300 μmol L⁻¹ with a correlation coefficient of 0.9968 and a high imprinting factor (IF) of 4.53. In addition, the prepared MIP-OVDAC/CdTe QDs were successfully used to detect BI in water samples. Therefore, this work provided a highly selective and sensitive fluorescence probe for the detection of BI. In addition, the fluorescence probe could be used to detect other targets by changing the functional monomers.

Based on the fluorescence quenching phenomenon, a smart fluorescent microsensor was synthesized.

Ag Nanoparticles Sensitized In2O3 Nanograin for the Ultrasensitive HCHO Detection at Room Temperature

Formaldehyde (HCHO) is the main source of indoor air pollutant. HCHO sensors are therefore of paramount importance for timely detection in daily life. However, existing sensors do not meet the stringent performance targets, while deactivation due to sensing detection at room temperature, for example, at extremely low concentration of formaldehyde (especially lower than 0.08 ppm), is a widely unsolved problem. Herein, we present the Ag nanoparticles (Ag NPs) sensitized dispersed In₂O₃ nanograin via a low-fabrication-cost hydrothermal strategy, where the Ag NPs reduces the apparent activation energy for HCHO transporting into and out of the In₂O₃ nanoparticles, while low concentrations detection at low working temperature is realized. The pristine In₂O₃ exhibits a sluggish response (R_a/R_g = 4.14 to 10 ppm) with incomplete recovery to HCHO gas. After Ag functionalization, the 5%Ag-In₂O₃ sensor shows a dramatically enhanced response (135) with a short response time (102 s) and recovery time (157 s) to 1 ppm HCHO gas at 30 °C, which benefits from the Ag NPs that electronically and chemically sensitize the crystal In₂O₃ nanograin, greatly enhancing the selectivity and sensitivity.

Highly selective detection of methanol over ethanol by a handheld gas sensor

Methanol poisoning causes blindness, organ failure or even death when recognized too late. Currently, there is no methanol detector for quick diagnosis by breath analysis or for screening of laced beverages. Typically, chemical sensors cannot distinguish methanol from the much higher ethanol background. Here, we present an inexpensive and handheld sensor for highly selective methanol detection. It consists of a separation column (Tenax) separating methanol from interferants like ethanol, acetone or hydrogen, as in gas chromatography, and a chemoresistive gas sensor (Pd-doped SnO2 nanoparticles) to quantify the methanol concentration. This way, methanol is measured within 2 min from 1 to 1000 ppm without interference of much higher ethanol levels (up to 62,000 ppm). As a proof-of-concept, we reliably measure methanol concentrations in spiked breath samples and liquor. This could enable the realization of highly selective sensors in emerging applications such as breath analysis or air quality monitoring.

Enhancing adsorption capacity while maintaining specific recognition performance of mesoporous silica: a novel imprinting strategy with amphiphilic ionic liquid as surfactant

In order to facilitate the broad applications of molecular recognition materials in biomedical areas, it is critical to enhance their adsorption capacity while maintaining their excellent recognition performance. In this work, we designed and synthesized well-defined peptide-imprinted mesoporous silica (PIMS) for specific recognition of an immunostimulating hexapeptide from human casein (IHHC) by using amphiphilic ionic liquid as the surfactant to anchor IHHC via a combination of one-step sol-gel method and docking oriented imprinting approach. Thereinto, theoretical calculation was employed to reveal the multiple binding interactions and dual-template configuration between amphiphilic ionic liquid and IHHC. The fabricated PIMS was characterized and an in-depth analysis of specific recognition mechanism was conducted. Results revealed that both adsorption and recognition capabilities of PIMS far exceeded that of the NIMS's. More significantly, the PIMS exhibited a superior binding capacity (60.5 mg g^-1), which could increase 18.9% than the previous work. The corresponding imprinting factor and selectivity coefficient could reach up to 4.51 and 3.30, respectively. The PIMS also possessed lickety-split kinetic binding for IHHC, where the equilibrium time was only 10 min. All of these merits were due to the high surface area and the synergistic effect of multiple interactions (including hydrogen bonding, π-π stacking, ion-ion electrostatic interactions and van der Waals interactions, etc) between PIMS and IHHC in imprinted sites. The present work suggests the potential application of PIMS for large-scale and high-effective separation of IHHC, which may lead to their broad applications in drug/gene deliver, biosensors, catalyst and so on.