A comparative study of the behavior of neural progenitor cells in extrusion-based in vitro hydrogel models

3D hydrogel microfibers promote the differentiation of encapsulated neural stem cells and facilitate neuron protection and axon regrowth after complete transactional spinal cord injury

Spinal cord injury (SCI) can cause permanent impairment to motor or sensory functions. Pre-cultured neural stem cell (NSC) hydrogel scaffolds have emerged as a promising approach to treat SCI by promoting anti-inflammatory effects, axon regrowth, and motor function restoration. Here, in this study, we performed a coaxial extrusion process to fabricate a core-shell hydrogel microfiber with high NSC density in the core portion. Oxidized hyaluronic acid, carboxymethyl chitosan, and matrigel blend were used as a matrix for NSC growth and to facilitate the fabrication process. During thein vitrodifferentiation culture, it was found that NSC microfibers could differentiate into neurons and astrocytes with higher efficiency compared to NSC cultured in petri dishes. Furthermore, duringin vivotransplantation, NSC microfibers were coated with polylactic acid nanosheets by electrospinning for reinforcement. The coated NSC nanofibers exhibited higher anti-inflammatory effect and lesion cavity filling rate compared with the control group. Meanwhile, more neuron- and oligodendrocyte-like cells were visualized at the lesion epicenter. Finally, axon regrowth across the whole lesion site was observed, demonstrating that the microfiber could guide renascent axon regrowth. Experiment results indicate that the NSC microfiber is a promising bioactive treatment for complete SCI treatment with superior outcomes.

3D bioprinted mesenchymal stromal cells in skin wound repair

Skin tissue regeneration and repair is a complex process involving multiple cell types, and current therapies are limited to promoting skin wound healing. Mesenchymal stromal cells (MSCs) have been proven to enhance skin tissue repair through their multidifferentiation and paracrine effects. However, there are still difficulties, such as the limited proliferative potential and the biological processes that need to be strengthened for MSCs in wound healing. Recently, three-dimensional (3D) bioprinting has been applied as a promising technology for tissue regeneration. 3D-bioprinted MSCs could maintain a better cell ability for proliferation and expression of biological factors to promote skin wound healing. It has been reported that 3D-bioprinted MSCs could enhance skin tissue repair through anti-inflammatory, cell proliferation and migration, angiogenesis, and extracellular matrix remodeling. In this review, we will discuss the progress on the effect of MSCs and 3D bioprinting on the treatment of skin tissue regeneration, as well as the perspective and limitations of current research.

4D Printing: A Cutting-edge Platform for Biomedical Applications

Nature's materials have evolved over time to be able to respond to environmental stimuli by generating complex structures that can change their functions in response to distance, time, and direction of stimuli. A number of technical efforts are currently being made to improve printing resolution, shape fidelity, and printing speed to mimic the structural design of natural materials with three-dimensional (3D) printing. Unfortunately, this technology is limited by the fact that printed objects are static and cannot be reshaped dynamically in response to stimuli. In recent years, several smart materials have been developed that can undergo dynamic morphing in response to a stimulus, thus resolving this issue. Four-dimensional (4D) printing refers to a manufacturing process involving additive manufacturing, smart materials, and specific geometries. It has become an essential technology for biomedical engineering and has the potential to create a wide range of useful biomedical products. This paper will discuss the concept of 4D bioprinting and the recent developments in smart matrials, which can be actuated by different stimuli and be exploited to develop biomimetic materials and structures, with significant implications for pharmaceutics and biomedical research, as well as prospects for the future.

3D coaxial bioprinting: process mechanisms, bioinks and applications

In the last decade, bioprinting has emerged as a facile technique for fabricating tissues constructs mimicking the architectural complexity and compositional heterogeneity of native tissues. Amongst different bioprinting modalities, extrusion-based bioprinting (EBB) is the most widely used technique. Coaxial bioprinting, a type of EBB, enables fabrication of concentric cell-material layers and enlarges the scope of EBB to mimic several key aspects of native tissues. Over the period of development of bioprinting, tissue constructs integrated with vascular networks, have been one of the major achievements made possible largely by coaxial bioprinting. In this review, current advancements in biofabrication of constructs with coaxial bioprinting are discussed with a focus on different bioinks that are particularly suitable for this modality. This review also expounds the properties of different bioinks suitable for coaxial bioprinting and then analyses the key achievements made by the application of coaxial bioprinting in tissue engineering, drug delivery and in-vitro disease modelling. The major limitations and future perspectives on the critical factors that will determine the ultimate clinical translation of the versatile technique are also presented to the reader.

Three-dimensional-engineered bioprinted in vitro human neural stem cell self-assembling culture model constructs of Alzheimer's disease

The pathogenic cascade of Alzheimer's disease (AD) characterized by amyloid-β protein accumulation is still poorly understood, partially owing to the limitations of relevant models without in vivo neural tissue microenvironment to recapitulate cell-cell interactions. To better mimic neural tissue microenvironment, three-dimensional (3D) core-shell AD model constructs containing human neural progenitor cells (NSCs) with 2% matrigel as core bioink and 2% alginate as shell bioink have been bioprinted by a co-axial bioprinter, with a suitable shell thickness for nutrient exchange and barrier-free cell interaction cores. These constructs exhibit cell self-clustering and -assembling properties and engineered reproducibility with long-term cell viability and self-renewal, and a higher differentiation level compared to 2D and 3D MIX models. The different effects of 3D bioprinted, 2D, and MIX microenvironments on the growth of NSCs are mainly related to biosynthesis of amino acids and glyoxylate and dicarboxylate metabolism on day 2 and ribosome, biosynthesis of amino acids and proteasome on day 14. Particularly, the model constructs demonstrated Aβ aggregation and higher expression of Aβ and tau isoform genes compared to 2D and MIX controls. AD model constructs will provide a promising strategy to facilitate the development of a 3D in vitro AD model for neurodegeneration research.

The effects of GelMA hydrogel on nerve repair and regeneration in mice with spinal cord injury

Background

To determine the effects of gelatin methacryloyl (GelMA) hydrogel on nerve repair and regeneration in mice with spinal cord injury (SCI).

Methods

A total of 30 ICR mice (6–8 weeks old) were randomly assigned into the control group, the model group, and the experimental group via the random digits table method. There were 10 mice in each group. All mice underwent a T8 laminectomy. For mice in the experimental group and the model group, after the T8 laminectomy, SCI models were constructed by clamping the mice spinal cord tissue for 1 minute using an aneurysm clip (25 g). Additionally, the SCI area of each mouse in the experimental group was locally injected with 0.05–0.7 mL GelMA hydrogel [10% (w/v)] and photocrosslinking was initiated under a blue light source with a wavelength of 405 nm. The exercise performance of each mouse was tested via the bedside mobility scale (BMS) on post-operative days 1, 3, 7, and 14. After 14 days, mice were sacrificed and the dorsal root ganglion (DRG) sensory neurons were isolated and cultured for 3 days in vitro. The axon lengths of the neurons were then evaluated. Immunohistochemical staining was performed to assess the development of syringomyelia in the area. Western blots (WB) and immunofluorescence staining were performed to quantify the expression of glial fibrillary acidic protein (GFAP), growth associated protein (GAP)43, and nestin in the DRG neurons from each group of mice.

Results

Compared with mice in the control group, mice in the SCI model group showed a notable decrease in exercise ability, while the exercise ability of mice in the experimental group recovered markedly after treatment with GelMA hydrogel. Administration of GelMA hydrogel lengthened the axon of DRG neurons in mice and reduced the area of syringomyelia. Furthermore, GelMA hydrogel inhibited scar formation and promoted the recovery of neurological function by upregulating GAP43 and nestin expression and downregulating GFAP expression.

Conclusions

In mice with SCI, local injection of GelMA hydrogel strongly inhibited scar formation, reduced the area of syringomyelia, and promoted nerve regeneration and recovery of limb movement function.

The effect of neural cell integrated into 3D co-axial bioprinted BMMSC structures during osteogenesis

A three-dimensional (3D) bioprinting is a new strategy for fabricating 3D cell-laden constructs that mimic the structural and functional characteristics of various tissues and provides a similar architecture and microenvironment of the native tissue. However, there are few reported studies on the neural function properties of bioengineered bone autografts. Thus, this study was aimed at investigating the effects of neural cell integration into 3D bioprinted bone constructs. The bioprinted hydrogel constructs could maintain long-term cell survival, support cell growth for human bone marrow-derived mesenchymal stem cells (BMMSCs), reduce cell surface biomarkers of stemness, and enhance orthopedic differentiation with higher expression of osteogenesis-related genes, including osteopontin (OPN) and bone morphogenetic protein-2. More importantly, the bioprinted constructs with neural cell integration indicated higher OPN gene and secretory alkaline phosphatase levels. These results suggested that the innervation in bioprinted bone constructs can accelerate the differentiation and maturation of bone development and provide patients with an option for accelerated bone function restoration.

A facile, versatile hydrogel bioink for 3D bioprinting benefits long-term subaqueous fidelity, cell viability and proliferation

Both of the long-term fidelity and cell viability of three-dimensional (3D)-bioprinted constructs are essential to precise soft tissue repair. However, the shrinking/swelling behavior of hydrogels brings about inadequate long-term fidelity of constructs, and bioinks containing excessive polymer are detrimental to cell viability. Here, we obtained a facile hydrogel by introducing 1% aldehyde hyaluronic acid (AHA) and 0.375% N-carboxymethyl chitosan (CMC), two polysaccharides with strong water absorption and water retention capacity, into classic gelatin (GEL, 5%)-alginate (ALG, 1%) ink. This GEL-ALG/CMC/AHA bioink possesses weak temperature dependence due to the Schiff base linkage of CMC/AHA and electrostatic interaction of CMC/ALG. We fabricated integrated constructs through traditional printing at room temperature and in vivo simulation printing at 37°C. The printed cell-laden constructs can maintain subaqueous fidelity for 30 days after being reinforced by 3% calcium chloride for only 20 s. Flow cytometry results showed that the cell viability was 91.38 ± 1.55% on day 29, and the cells in the proliferation plateau at this time still maintained their dynamic renewal with a DNA replication rate of 6.06 ± 1.24%. This work provides a convenient and practical bioink option for 3D bioprinting in precise soft tissue repair.

3D bioprinting of integral ADSCs-NO hydrogel scaffolds to promote severe burn wound healing

Severe burns are challenging to heal and result in significant death throughout the world. Adipose-derived mesenchymal stem cells (ADSCs) have emerged as a promising treatment for full-thickness burn healing but are impeded by their low viability and efficiency after grafting in vivo. Nitric oxide (NO) is beneficial in promoting stem cell bioactivity, but whether it can function effectively in vivo is still largely unknown. In this study, we bioprinted an efficient biological scaffold loaded with ADSCs and NO (3D-ADSCs/NO) to evaluate its biological efficacy in promoting severe burn wound healing. The integral 3D-ADSCs/NO hydrogel scaffolds were constructed via 3D bioprinting. Our results shown that 3D-ADSCs/NO can enhance the migration and angiogenesis of Human Umbilical Vein Endothelial Cells (HUVECs). Burn wound healing experiments in mice revealed that 3D-ADSCs/NO accelerated the wound healing by promoting faster epithelialization and collagen deposition. Notably, immunohistochemistry of CD31 suggested an increase in neovascularization, supported by the upregulation of vascular endothelial growth factor (VEGF) mRNA in ADSCs in the 3D biosystem. These findings indicated that 3D-ADSC/NO hydrogel scaffold can promote severe burn wound healing through increased neovascularization via the VEGF signalling pathway. This scaffold may be considered a promising strategy for healing severe burns.

A structure-supporting, self-healing, and high permeating hydrogel bioink for establishment of diverse homogeneous tissue-like constructs

The ready-to-use, structure-supporting hydrogel bioink can shorten the time for ink preparation, ensure cell dispersion, and maintain the preset shape/microstructure without additional assistance during printing. Meanwhile, ink with high permeability might facilitate uniform cell growth in biological constructs, which is beneficial to homogeneous tissue repair. Unfortunately, current bioinks are hard to meet these requirements simultaneously in a simple way. Here, based on the fast dynamic crosslinking of aldehyde hyaluronic acid (AHA)/N-carboxymethyl chitosan (CMC) and the slow stable crosslinking of gelatin (GEL)/4-arm poly(ethylene glycol) succinimidyl glutarate (PEG-SG), we present a time-sharing structure-supporting (TSHSP) hydrogel bioink with high permeability, containing 1% AHA, 0.75% CMC, 1% GEL and 0.5% PEG-SG. The TSHSP hydrogel can facilitate printing with proper viscoelastic property and self-healing behavior. By crosslinking with 4% PEG-SG for only 3 min, the integrity of the cell-laden construct can last for 21 days due to the stable internal and external GEL/PEG-SG networks, and cells manifested long-term viability and spreading morphology. Nerve-like, muscle-like, and cartilage-like in vitro constructs exhibited homogeneous cell growth and remarkable biological specificities. This work provides not only a convenient and practical bioink for tissue engineering, targeted cell therapy, but also a new direction for hydrogel bioink development.

•

A time-sharing structure-supporting (TSHSP) bioink based on gelation time difference between two gelling systems.

•

The high permeability of TSHSP hydrogel is the basis for effective matter exchange.

•

The TSHSP hydrogel facilitates room temperature printing with proper viscoelastic property and self-healing behavior.

•

Cells manifest long-term viability and spreading morphology in bioprinted TSHSP constructs.

•

In vitro tissue-like TSHSP constructs exhibit homogeneous cell growth and remarkable biological specificities.

Recent progress in extrusion 3D bioprinting of hydrogel biomaterials for tissue regeneration: a comprehensive review with focus on advanced fabrication techniques

Over the last decade, 3D bioprinting has received immense attention from research communities to bridge the divergence between artificially engineered tissue constructs and native tissues.

Engineering the fate and function of human T-cells via 3D bioprinting

T-cell immunotherapy holds promise for the treatment of cancer, infection, and autoimmune diseases. Nevertheless, T-cell therapy is limited by low cell expansion efficiency ex vivo and functional deficits. Here we describe two 3D bioprinting systems made by different biomaterials that mimic the in vivo formation of natural lymph vessels and lymph nodes which modulate T-cell with distinct fates and functions. We observe that coaxial alginate fibers promote T-cell expansion, less exhausted and enable CD4+ T-cell differentiation into central memory-like phenotype (Tcm), CD8+ T-cells differentiation into effector memory subsets (Tem), while alginate-gelatin scaffolds bring T-cells into a relatively resting state. Both of the two bioprinting methods are strikingly different from a standard suspension system. The former bioprinting method yields a new system for T-cell therapy and the latter method can be useful for making an immune-chip to elucidate links between immune response and disease.

Bioprinting Neural Systems to Model Central Nervous System Diseases

To date, pharmaceutical progresses in central nervous system (CNS) diseases are clearly hampered by the lack of suitable disease models. Indeed, animal models do not faithfully represent human neurodegenerative processes and human in vitro 2D cell culture systems cannot recapitulate the in vivo complexity of neural systems. The search for valuable models of neurodegenerative diseases has recently been revived by the addition of 3D culture that allows to re-create the in vivo microenvironment including the interactions among different neural cell types and the surrounding extracellular matrix (ECM) components. In this review, the new challenges in the field of CNS diseases in vitro 3D modeling are discussed, focusing on the implementation of bioprinting approaches enabling positional control on the generation of the 3D microenvironments. The focus is specifically on the choice of the optimal materials to simulate the ECM brain compartment and the biofabrication technologies needed to shape the cellular components within a microenvironment that significantly represents brain biochemical and biophysical parameters.

3D bioprinted glioma microenvironment for glioma vascularization

Glioblastoma is the most frequently diagnosed primary malignant brain tumor with unfavourable prognosis and high mortality. One of its key features is the extensive abnormal vascular network. Up to now, the mechanism of angiogenesis and the origin of tumor vascularization remain controversial. It is essential to establish an ideal preclinical tumor model to elucidate the mechanism of tumor vascularization, and the role of tumor cells in this process. In this study, both U118 cell and GSC23 cell exhibited good printability and cell proliferation. Compared with 3D-U118, 3D-GSC23 had a greater ability to form cell spheroids, to secrete vascular endothelial growth factor (VEGFA), and to form tubule-like structures in vitro. More importantly, 3D-glioma stem cells (GSC)23 cells had a greater power to transdifferentiate into functional endothelial cells, and blood vessels composed of tumor cells with an abnormal endothelial phenotype was observed in vivo. In summary, 3D bioprinted hydrogel scaffold provided a suitable tumor microenvironment (TME) for glioma cells and GSCs. This bioprinted model supported a novel TME for the research of glioma cells, especially GSCs in glioma vascularization and therapeutic targeting of tumor angiogenesis.