Metal ions bound at the active site of the junction-resolving enzyme T7 endonuclease I

Identification and purification of a novel bacteriophage T7 endonuclease from the Kogelberg Biosphere Reserve (KBR) biodiversity hotspot

The four-way (Holliday) DNA junction is a key intermediate in homologous recombination, a ubiquitous process that is important in DNA repair and generation of genetic diversity. The final stages of recombination require resolution of the junction into nicked-duplex species by the action of a junction-resolving enzyme. The enzymes involved are nucleases that are highly selective for the structure of branched DNA. Here we present the isolation, expression and purification of a novel T7 endonuclease from the Kogelberg Biosphere Reserve (KBR), which possesses junction resolving capabilities. An initial approach was employed where the process was scaled up to 3 L with IPTG concentration of 0.1 mM at 30 °C and purified via immobilised metal affinity chromatography (IMAC). Expression titres of 20 ± 0.003 µg.L-1 culture were achieved with the amount of KBR-T7 endonuclease required per reaction ranging from as low as 10 to 100 nanograms. The solubility of the enzyme was relatively poor; however, enzyme activity was not affected. A derivative for improved solubility and efficacy was then designed from this original wild-type version, MBP-KBR-T7 and was expressed under similar conditions at 20 °C yielding 1.63 ± 0.154 mg.L-1 of formulated enzyme. This novel high value enzyme derivative is a valuable asset within the molecular reagent space as a tool for confirming both in vivo and in vitro genome editing; therefore, a means to produce it recombinantly in a scalable and technoeconomicaly viable process is highly desirable.

Prokaryotic DNA Crossroads: Holliday Junction Formation and Resolution

Cells are continually exposed to a multitude of internal and external stressors, which give rise to various types of DNA damage. To protect the integrity of their genetic material, cells are equipped with a repertoire of repair proteins that engage in various repair mechanisms, facilitated by intricate networks of protein-protein and protein-DNA interactions. Among these networks is the homologous recombination (HR) system, a molecular repair mechanism conserved in all three domains of life. On one hand, HR ensures high-fidelity, template-dependent DNA repair, while on the other hand, it results in the generation of combinatorial genetic variations through allelic exchange. Despite substantial progress in understanding this pathway in bacteria, yeast, and humans, several critical questions remain unanswered, including the molecular processes leading to the exchange of DNA segments, the coordination of protein binding, conformational switching during branch migration, and the resolution of Holliday Junctions (HJs). This Review delves into our current understanding of the HR pathway in bacteria, shedding light on the roles played by various proteins or their complexes at different stages of HR. In the first part of this Review, we provide a brief overview of the end resection processes and the strand-exchange reaction, offering a concise depiction of the mechanisms that culminate in the formation of HJs. In the latter half, we expound upon the alternative methods of branch migration and HJ resolution more comprehensively and holistically, considering the historical research timelines. Finally, when we consolidate our knowledge about HR within the broader context of genome replication and the emergence of resistant species, it becomes evident that the HR pathway is indispensable for the survival of bacteria in diverse ecological niches.

Psychrobacter Phage Encoding an Antibiotics Resistance Gene Represents a Novel Caudoviral Family

Psychrobacter is an important bacterial genus that is widespread in Antarctic and marine environments. However, to date, only two complete Psychrobacter phage sequences have been deposited in the NCBI database. Here, the novel Psychrobacter phage vB_PmaS_Y8A, infecting Psychrobacter HM08A, was isolated from sewage in the Qingdao area, China. The morphology of vB_PmaS_Y8A was characterized by transmission electron microscopy, revealing an icosahedral head and long tail. The genomic sequence of vB_PmaS_Y8A is linear, double-stranded DNA with a length of 40,226 bp and 44.1% G+C content, and encodes 69 putative open reading frames. Two auxiliary metabolic genes (AMGs) were identified, encoding phosphoadenosine phosphosulfate reductase and MarR protein. The first AMG uses thioredoxin as an electron donor for the reduction of phosphoadenosine phosphosulfate to phosphoadenosine phosphate. MarR regulates multiple antibiotic resistance mechanisms in Escherichia coli and is rarely found in viruses. No tRNA genes were identified and no lysogeny-related feature genes were detected. However, many similar open reading frames (ORFs) were found in the host genome, which may indicate that Y8A also has a lysogenic stage. Phylogenetic analysis based on the amino acid sequences of whole genomes and comparative genomic analysis indicate that vB_PmaS_Y8A contains a novel genomic architecture similar only to that of Psychrobacter phage pOW20-A, although at a low similarity. vB_PmaS_Y8A represents a new family-level virus cluster with 22 metagenomic assembled viral genomes, here named Minviridae. IMPORTANCE Although Psychrobacter is a well-known and important bacterial genus that is widespread in Antarctic and marine environments, genetic characterization of its phages is still rare. This study describes a novel Psychrobacter phage containing an uncharacterized antibiotic resistance gene and representing a new virus family, Minviridae. The characterization provided here will bolster current understanding of genomes, diversity, evolution, and phage-host interactions in Psychrobacter populations.

A Pseudomonas Lysogenic Bacteriophage Crossing the Antarctic and Arctic, Representing a New Genus of Autographiviridae

Polar regions tend to support simple food webs, which are vulnerable to phage-induced gene transfer or microbial death. To further investigate phage-host interactions in polar regions and the potential linkage of phage communities between the two poles, we induced the release of a lysogenic phage, vB_PaeM-G11, from Pseudomonas sp. D3 isolated from the Antarctic, which formed clear phage plaques on the lawn of Pseudomonas sp. G11 isolated from the Arctic. From permafrost metagenomic data of the Arctic tundra, we found the genome with high-similarity to that of vB_PaeM-G11, demonstrating that vB_PaeM-G11 may have a distribution in both the Antarctic and Arctic. Phylogenetic analysis indicated that vB_PaeM-G11 is homologous to five uncultured viruses, and that they may represent a new genus in the Autographiviridae family, named Fildesvirus here. vB_PaeM-G11 was stable in a temperature range (4-40 °C) and pH (4-11), with latent and rise periods of about 40 and 10 min, respectively. This study is the first isolation and characterization study of a Pseudomonas phage distributed in both the Antarctic and Arctic, identifying its lysogenic host and lysis host, and thus provides essential information for further understanding the interaction between polar phages and their hosts and the ecological functions of phages in polar regions.

Antibacterial T6SS effectors with a VRR-Nuc domain are structure-specific nucleases

The type VI secretion system (T6SS) secretes antibacterial effectors into target competitors. Salmonella spp. encode five phylogenetically distinct T6SSs. Here, we characterize the function of the SPI-22 T6SS of Salmonella bongori showing that it has antibacterial activity and identify a group of antibacterial T6SS effectors (TseV1-4) containing an N-terminal PAAR-like domain and a C-terminal VRR-Nuc domain encoded next to cognate immunity proteins with a DUF3396 domain (TsiV1-4). TseV2 and TseV3 are toxic when expressed in Escherichia coli and bacterial competition assays confirm that TseV2 and TseV3 are secreted by the SPI-22 T6SS. Phylogenetic analysis reveals that TseV1-4 are evolutionarily related to enzymes involved in DNA repair. TseV3 recognizes specific DNA structures and preferentially cleave splayed arms, generating DNA double-strand breaks and inducing the SOS response in target cells. The crystal structure of the TseV3:TsiV3 complex reveals that the immunity protein likely blocks the effector interaction with the DNA substrate. These results expand our knowledge on the function of Salmonella pathogenicity islands, the evolution of toxins used in biological conflicts, and the endogenous mechanisms regulating the activity of these toxins.

Inhibition of Insulin Degrading Enzyme to Control Diabetes Mellitus and its Applications on some Other Chronic Disease: a Critical Review

PURPOSE

This review aims to provide a precise perceptive of the insulin-degrading enzyme (IDE) and its relationship to type 2 diabetes (T2D), Alzheimer's disease (AD), obesity, and cardiovascular diseases. The purpose of the current study was to provide clear idea of treating prevalent diseases such as T2D, and AD by molecular pharmacological therapeutics rather than conventional medicinal therapy.

METHODS

To achieve the aims, molecular docking was performed using several softwares such as LIGPLOT+, Python, and Protein-Ligand Interaction Profiler with corresponding tools.

RESULTS

The IDE is a large zinc-metalloprotease that breakdown numerous pathophysiologically important extracellular substrates, comprising amyloid β-protein (Aβ) and insulin. Recent studies demonstrated that dysregulation of IDE leads to develop AD and T2D. Specifically, IDE regulates circulating insulin in a variety of organs via a degradation-dependent clearance mechanism. IDE is unique because it was subjected to allosteric activation and mediated via an oligomer structure.

CONCLUSION

In this review, we summarised the factors that modulate insulin reformation by IDE and interaction of IDE and some recent reports on IDE inhibitors against AD and T2D. We also highlighted the latest signs of progress of the function of IDE and challenges in advancing IDE- targetted therapies against T2D and AD.

A zinc-dependent switching mechanism from an open to a new closed-state conformation of insulin-degrading enzyme

The switching mechanism between an open-state conformation and a newly closed-state conformation of IDE is stabilized by electrostatic interactions between domain D1 and domain D3.

Holliday junction-resolving enzymes-structures and mechanisms

Holliday junction-resolving enzymes are nucleases that are highly specific for the structure of the junction, to which they bind in dimeric form. Two symmetrically disposed cleavages are made. These are not simultaneous, but the second cleavage is accelerated relative to the first, so ensuring that bilateral cleavage occurs during the lifetime of the DNA-protein complex. In eukaryotic cells there are two known junction-resolving activities. GEN1 is similar to enzymes from lower organisms. A crystallographic structure of a fungal GEN1 bound to the product of resolution has been determined. These complexes are dimerized within the crystal lattice such that the strands of the products may be simply reconnected to form a junction. These structures suggest a trajectory for the resolution process.

Analysis of the Intrinsically Disordered N-Terminus of the DNA Junction-Resolving Enzyme T7 Endonuclease I: Identification of Structure Formed upon DNA Binding

The four-way (Holliday) DNA junction of homologous recombination is processed by the symmetrical cleavage of two strands by a nuclease. These junction-resolving enzymes bind to four-way junctions in dimeric form, distorting the structure of the junction in the process. Crystal structures of T7 endonuclease I have been determined as free protein, and the complex with a DNA junction. In neither crystal structure was the N-terminal 16-amino acid peptide visible, yet deletion of this peptide has a marked effect on the resolution process. Here we have investigated the N-terminal peptide by inclusion of spin-label probes at unique sites within this region, studied by electron paramagnetic resonance. Continuous wave experiments show that these labels are mobile in the free protein but become constrained on binding a DNA junction, with the main interaction occurring for residues 7-10 and 12. Distance measurements between equivalent positions within the two peptides of a dimer using PELDOR showed that the intermonomeric distances for residues 2-12 are long and broadly distributed in the free protein but are significantly shortened and become more defined on binding to DNA. These results suggest that the N-terminal peptides become more organized on binding to the DNA junction and nestle into the minor grooves at the branchpoint, consistent with the biochemical data indicating an important role in the resolution process. This study demonstrates the presence of structure within a protein region that cannot be viewed by crystallography.

Structure and Metal Binding Properties of a Poxvirus Resolvase

Poxviruses replicate their linear genomes by forming concatemers that must be resolved into monomeric units to produce new virions. A viral resolvase cleaves DNA four-way junctions extruded at the concatemer junctions to produce monomeric genomes. This cleavage reaction is required for viral replication, so the resolvase is an attractive target for small molecule inhibitors. To provide a platform for understanding resolvase mechanism and designing inhibitors, we have determined the crystal structure of the canarypox virus (CPV) resolvase. CPV resolvase is dimer of RNase H superfamily domains related to Escherichia coli RuvC, with an active site lined by highly conserved acidic residues that bind metal ions. There are several intriguing structural differences between resolvase and RuvC, and a model of the CPV resolvase·Holliday junction complex provides insights into the consequences of these differences, including a plausible explanation for the weak sequence specificity exhibited by the poxvirus enzymes. The model also explains why the poxvirus resolvases are more promiscuous than RuvC, cleaving a variety of branched, bulged, and flap-containing substrates. Based on the unique active site structure observed for CPV resolvase, we have carried out a series of experiments to test divalent ion usage and preferences. We find that the two resolvase metal binding sites have different preferences for Mg(2+) versus Mn(2+) Optimal resolvase activity is maintained with 5 μm Mn(2+) and 100 μm Mg(2+), concentrations that are well below those required for either metal alone. Together, our findings provide biochemical insights and structural models that will facilitate studying poxvirus replication and the search for efficient poxvirus inhibitors.

Crystal structure of λ exonuclease in complex with DNA and Ca(2+)

Bacteriophage λ exonuclease (λexo) is a ring-shaped homotrimer that resects double-stranded DNA ends in the 5'-3' direction to generate a long 3'-overhang that is a substrate for recombination. λexo is a member of the type II restriction endonuclease-like superfamily of proteins that use a Mg(2+)-dependent mechanism for nucleotide cleavage. A previous structure of λexo in complex with DNA and Mg(2+) was determined using a nuclease defective K131A variant to trap a stable complex. This structure revealed the detailed coordination of the two active site Mg(2+) ions but did not show the interactions involving the side chain of the conserved active site Lys-131 residue. Here, we have determined the crystal structure of wild-type (WT) λexo in complex with the same DNA substrate, but in the presence of Ca(2+) instead of Mg(2+). Surprisingly, there is only one Ca(2+) bound in the active site, near the position of Mg(A) in the structure with Mg(2+). The scissile phosphate is displaced by 2.2 Å relative to its position in the structure with Mg(2+), and the network of interactions involving the attacking water molecule is broken. Thus, the structure does not represent a catalytic configuration. However, the crystal structure does show clear electron density for the side chain of Lys-131, which is held in place by interactions with Gln-157 and Glu-129. By combining the K131A-Mg(2+) and WT-Ca(2+) structures, we constructed a composite model to show the likely interactions of Lys-131 during catalysis. The implications with regard to the catalytic mechanism are discussed.

Holliday junction resolvases

Four-way DNA intermediates, called Holliday junctions (HJs), can form during meiotic and mitotic recombination, and their removal is crucial for chromosome segregation. A group of ubiquitous and highly specialized structure-selective endonucleases catalyze the cleavage of HJs into two disconnected DNA duplexes in a reaction called HJ resolution. These enzymes, called HJ resolvases, have been identified in bacteria and their bacteriophages, archaea, and eukaryotes. In this review, we discuss fundamental aspects of the HJ structure and their interaction with junction-resolving enzymes. This is followed by a brief discussion of the eubacterial RuvABC enzymes, which provide the paradigm for HJ resolvases in other organisms. Finally, we review the biochemical and structural properties of some well-characterized resolvases from archaea, bacteriophage, and eukaryotes.

DNA cleavage by Type ISP Restriction-Modification enzymes is initially targeted to the 3'-5' strand

The mechanism by which a double-stranded DNA break is produced following collision of two translocating Type I Restriction–Modification enzymes is not fully understood. Here, we demonstrate that the related Type ISP Restriction–Modification enzymes LlaGI and LlaBIII can cooperate to cleave DNA following convergent translocation and collision. When one of these enzymes is a mutant protein that lacks endonuclease activity, DNA cleavage of the 3′-5′ strand relative to the wild-type enzyme still occurs, with the same kinetics and at the same collision loci as for a reaction between two wild-type enzymes. The DNA nicking activity of the wild-type enzyme is still activated by a protein variant entirely lacking the Mrr nuclease domain and by a helicase mutant that cannot translocate. However, the helicase mutant cannot cleave the DNA despite the presence of an intact nuclease domain. Cleavage by the wild-type enzyme is not activated by unrelated protein roadblocks. We suggest that the nuclease activity of the Type ISP enzymes is activated following collision with another Type ISP enzyme and requires adenosine triphosphate binding/hydrolysis but, surprisingly, does not require interaction between the nuclease domains. Following the initial rapid endonuclease activity, additional DNA cleavage events then occur more slowly, leading to further processing of the initial double-stranded DNA break.

The importance of the N-terminus of T7 endonuclease I in the interaction with DNA junctions

T7 endonuclease I is a dimeric nuclease that is selective for four-way DNA junctions. Previous crystallographic studies have found that the N-terminal 16 amino acids are not visible, neither in the presence nor in the absence of DNA. We have now investigated the effect of deleting the N-terminus completely or partially. N-terminal deleted enzyme binds more tightly to DNA junctions but cleaves them more slowly. While deletion of the N-terminus does not measurably affect the global structure of the complex, the presence of the peptide is required to generate a local opening at the center of the DNA junction that is observed by 2-aminopurine fluorescence. Complete deletion of the peptide leads to a cleavage rate that is 3 orders of magnitude slower and an activation enthalpy that is 3-fold higher, suggesting that the most important interaction of the peptide is with the reaction transition state. Taken together, these data point to an important role of the N-terminus in generating a central opening of the junction that is required for the cleavage reaction to proceed properly. In the absence of this, we find that a cruciform junction is no longer subject to bilateral cleavage, but instead, just one strand is cleaved. Thus, the N-terminus is required for a productive resolution of the junction.

Metal ions affect insulin-degrading enzyme activity

Insulin degradation is a finely tuned process that plays a major role in controlling insulin action and most evidence supports IDE (insulin-degrading enzyme) as the primary degradative agent. However, the biomolecular mechanisms involved in the interaction between IDE and its substrates are often obscure, rendering the specific enzyme activity quite difficult to target. On the other hand, biometals, such as copper, aluminum and zinc, have an important role in pathological conditions such as Alzheimer's disease or diabetes mellitus. The metabolic disorders connected with the latter lead to some metallostasis alterations in the human body and many studies point at a high level of interdependence between diabetes and several cations. We have previously reported (Grasso et al., Chem. Eur. J. 17 (2011) 2752-2762) that IDE activity toward Aβ peptides can be modulated by metal ions. Here, we have investigated the effects of different metal ions on the IDE proteolytic activity toward insulin as well as a designed peptide comprising a portion of the insulin B chain (B20-30), which has a very low affinity for metal ions. The results obtained by different experimental techniques clearly show that IDE is irreversibly inhibited by copper(I) but is still able to process its substrates when it is bound to copper(II).

Analysis of conformational changes in the DNA junction-resolving enzyme T7 endonuclease I on binding a four-way junction using EPR

The four-way (Holliday) DNA junction is the central intermediate in homologous recombination. It is ultimately resolved into two nicked-duplex species by the action of a junction-resolving enzyme. These enzymes are highly selective for the structure of branched DNA, yet as a class these proteins impose significant distortion on their target junctions. Bacteriophage T7 endonuclease I selectively binds and cleaves DNA four-way junctions. The protein is an extremely stable dimer, comprising two globular domains joined by a β-strand bridge with each active site including amino acids from both polypeptides. The crystal structure of endonuclease I has been solved both as free protein and in complex with a DNA junction, showing that the protein, as well as the junction, becomes distorted on binding. We have therefore used site-specific spin-labeling in conjunction with EPR distance measurements to analyze induced fit in the binding of endonuclease I to a DNA four-way junction. The results support the change in protein structure as it binds to the junction. In addition, we have examined the structure of wild type and catalytically inactive mutants alone and in complex with DNA. We demonstrate the presence of hitherto undefined metastable conformational states within endonuclease I, showing how these states can be influenced by DNA-junction binding or mutations within the active sites. In addition, we demonstrate a previously unobserved instability in the N-terminal α1-helix upon active site mutation. These studies reveal that structural changes in both DNA and protein occur in the action of this junction-resolving enzyme.

Metal ion and DNA binding by single-chain PvuII endonuclease: lessons from the linker

Understanding the roles of metal ions in restriction enzymes has been complicated by both the presence of two metal ions in many active sites and their homodimeric structure. Using a single-chain form of the wild-type restriction enzyme PvuII (scWT) in which subunits are fused with a short polypeptide linker (Simoncsits et al. in J. Mol. Biol. 309:89-97, 2001), we have characterized metal ion and DNA binding behavior in one subunit and examined the effects of the linker on dimer behavior. scWT exhibits heteronuclear single quantum coherence NMR spectra similar to those of native wild-type PvuII (WT). For scWT, isothermal titration calorimetry data fit to two Ca(II) sites per subunit with low-millimolar K (d)s. The variant scWT|E68A, in which metal ion binding in one subunit is abolished by mutation, also binds two Ca(II) ions in the WT subunit with low-millimolar K (d)s. When there are no added metal ions, DNA binding affinity for scWT is tenfold stronger than that of the native WT, but tenfold weaker at saturating Ca(II) concentration. In the presence of Ca(II), scWT|E68A binds target DNA similarly to scWT, indicating that high-affinity substrate binding can be carried energetically by one metal-ion-binding subunit. Global analysis of DNA binding data for scWT|E68A suggests that the metal-ion-dependent behaviors observed for WT are reflective of independent subunit behavior. This characterization provides an understanding of subunit contributions in a homodimeric context.

The interaction of four-way DNA junctions with resolving enzymes

Four-way DNA (Holliday) junctions are resolved into duplex species by the action of the junction-resolving enzymes, nucleases selective for the structure of helical branchpoints. These have been isolated from bacteria and their phages, archaea, yeasts and mammals, including humans. They are all dimeric proteins that bind with high selectivity to DNA junctions and generate bilateral cleavage within the lifetime of the DNA-protein complex. Recent success in obtaining X-ray crystal structures of resolving enzymes bound to DNA junctions has revealed how the structural selectivity of these enzymes is achieved.

Nucleophile activation in PD...(D/E)xK metallonucleases: an experimental and computational pK(a) study

Metallonucleases conduct metal-dependent nucleic acid hydrolysis. While metal ions serve in multiple mechanistic capacities in these enzymes, precisely how the attacking water is activated remains unclear for those lacking an obvious general base. All arguments hinge on appropriate pK(a)s for active site moieties very close to this species, and measurement of the pK(a) of a specific water molecule is difficult to access experimentally. Here we describe a computational approach for exploring the local electrostatic influences on the water-derived nucleophile in metallonucleases featuring the common PD...(D/E)xK motif. We utilized UHBD to predict the pK(a)s of active site groups, including that of a water molecule positioned to act as a nucleophile. The pK(a) of a Mg(II)-ligated water molecule hydrogen bonded to the conserved Lys70 in a Mg(II)-PvuII enzyme complex was calculated to be 6.5. The metal and the charge on the Lys group were removed in separate experiments; both resulted in the elevation of the pK(a) of this water molecule, consistent with contributions from both moieties to lowering this pK(a). This behavior is preserved among other PD...(D/E)xK metallonucleases. pK(a)s extracted from the pH dependence of the single turnover rate constant are compared to previous experimental data and the above predicted pK(a)s.

Metal cofactors in the structure and activity of the fowlpox resolvase

Poxvirus DNA replication generates linear concatemers containing many copies of the viral genome with inverted repeat sequences at the junctions between monomers. The inverted repeats refold to generate Holliday junctions, which are cleaved by the virus-encoded resolvase enzyme to form unit-length genomes. Here we report studies of the influence of metal cofactors on the activity and structure of the resolvase of fowlpox virus, which provides a tractable model for in vitro studies. Small-molecule inhibitors of related enzymes bind simultaneously to metal cofactors and nearby surface amino acid residues, so understanding enzyme-cofactor interactions is important for the design of antiviral agents. Analysis of inferred active-site residues (D7, E60, K102, D132, and D135) by mutagenesis and metal rescue experiments specified residues that contribute to binding metal ions and that multiple binding sites are probably involved. Differential electrophoretic analysis was used to map the conformation of the DNA junction when bound by resolvase. For the wild-type complex in the presence of EDTA (ethylenediaminetetraacetic acid) or Ca(2+), migration was consistent with the DNA arms arranged in near-tetrahedral geometry. However, the D7N active-site mutant resolvase held the arms in a more planar arrangement in EDTA, Ca(2+), or Mg(2+) conditions, implicating metal-dependent contacts at the active site in the larger architecture of the complex. These data show how divalent metals dictate the conformation of FPV resolvase-DNA complexes and subsequent DNA cleavage.

Kinetic analysis of product release and metal ions in a metallonuclease

Most nucleases rely on divalent cations as cofactors to catalyze the hydrolysis of nucleic acid phosphodiester bonds. Here both equilibrium and kinetic experiments are used to test recently proposed models regarding the metal ion dependence of product release and the degree of cooperativity between metal ions bound in the active sites of the homodimeric PvuII endonuclease. Equilibrium fluorescence anisotropy studies indicate that product binding is dramatically weakened in the presence of metal ions. Pre-steady state kinetics indicate that product release is at least partially rate limiting. Steady state and pre-steady state data fit best to models in which metals remain bound to the enzyme after the release of product. Finally, analysis of cooperative and independent binding models for metal ions indicates that single turnover kinetic data are consistent with little to no positive cooperativity between the two metal ions binding each active site.

The structure of a fibril-forming sequence, NNQQNY, in the context of a globular fold

Numerous human disorders are associated with the formation of protein fibrils. The fibril-forming capacity of a protein has been found in recent studies to be determined by a short segment of residues that forms a dual beta-sheet, called a steric zipper, in the spine of the fibril. The question arises as to whether a fibril-forming segment, when inserted within the sequence of a globular protein, will invariably cause the protein to form fibrils. Here we investigate this question by inserting the known fibril-forming segment NNQQNY into the globular enzyme, T7 endonuclease I. From earlier studies, we know that in its fibril form, NNQQNY is in an extended conformation. We first found that the inserted NNQQNY stimulates fibril formation of T7 endonuclease I in solution. Thus NNQQNY within T7 endonuclease I can exist in an extended conformation, capable of forming the steric zipper in the core of a fibril. We also found that T7 endonuclease I folds into a decamer that does not form fibrils. We determined the structure of the decamer by X-ray crystallography, finding an unusual oligomer without point group symmetry, and finding that the NNQQNY segments within the decamer adopt two twisted conformations, neither is apparently able to fibrillize. We conclude that twisting of fibril forming sequences from the fully extended conformation, imposed by the context of their placement in proteins, can interfere with fibril formation.

New insight into the recognition of branched DNA structure by junction-resolving enzymes

Junction-resolving enzymes are nucleases that exhibit structural selectivity for the four-way (Holliday) junction in DNA. In general, these enzymes both recognize and distort the structure of the junction. New insight into the molecular recognition processes has been provided by two recent co-crystal structures of resolving enzymes bound to four-way DNA junctions in highly contrasting ways. T4 endonuclease VII binds the junction in an open conformation to an approximately flat binding surface whereas T7 endonuclease I envelops the junction, which retains a much more three-dimensional structure. Both proteins make contacts with the DNA backbone over an extensive area in order to generate structural specificity. The comparison highlights the versatility of Holliday junction resolution, and extracts some general principles of recognition.

The structural basis of Holliday junction resolution by T7 endonuclease I

The four-way (Holliday) DNA junction is the central intermediate in homologous recombination, a ubiquitous process that is important in DNA repair and generation of genetic diversity. The penultimate stage of recombination requires resolution of the DNA junction into nicked-duplex species by the action of a junction-resolving enzyme, examples of which have been identified in a wide variety of organisms. These enzymes are nucleases that are highly selective for the structure of branched DNA. The mechanism of this selectivity has, however, been unclear in the absence of structural data. Here we present the crystal structure of the junction-resolving enzyme phage T7 endonuclease I in complex with a synthetic four-way DNA junction. Although the enzyme is structure-selective, significant induced fit occurs in the interaction, with changes in the structure of both the protein and the junction. The dimeric enzyme presents two binding channels that contact the backbones of the junction's helical arms over seven nucleotides. These interactions effectively measure the relative orientations and positions of the arms of the junction, thereby ensuring that binding is selective for branched DNA that can achieve this geometry.

Convergent Evolution of Enzyme Active Sites Is not a Rare Phenomenon

Since convergent evolution of enzyme active sites was first identified in serine proteases, other individual instances of this phenomenon have been documented. However, a systematic analysis assessing the frequency of this phenomenon across enzyme space is still lacking. This work uses the Query3d structural comparison algorithm to integrate for the first time detailed knowledge about catalytic residues, available through the Catalytic Site Atlas (CSA), with the evolutionary information provided by the Structural Classification of Proteins (SCOP) database. This study considers two modes of convergent evolution: (i) mechanistic analogues which are enzymes that use the same mechanism to perform related, but possibly different, reactions (considered here as sharing the first three digits of the EC number); and (ii) transformational analogues which catalyse exactly the same reaction (identical EC numbers), but may use different mechanisms. Mechanistic analogues were identified in 15% (26 out of 169) of the three-digit EC groups considered, showing that this phenomenon is not rare. Furthermore 11 of these groups also contain transformational analogues. The catalytic triad is the most widespread active site; the results of the structural comparison show that this mechanism, or variations thereof, is present in 23 superfamilies. Transformational analogues were identified for 45 of the 951 four-digit EC numbers present within the CSA and about half of these were also mechanistic analogues exhibiting convergence of their active sites. This analysis has also been extended to the whole Protein Data Bank to provide a complete and manually curated list of the all the transformational analogues whose structure is classified in SCOP. The results of this work show that the phenomenon of convergent evolution is not rare, especially when considering large enzymatic families.

A Second Divalent Metal Ion in the Group II Intron Reaction Center

Group II introns are mobile genetic elements that have been implicated as agents of genetic diversity, and serve as important model systems for investigating RNA catalysis and pre-mRNA splicing. In the absence of an atomic-resolution structure of the intron, detailed understanding of its catalytic mechanism has remained elusive. Previous identification of a divalent metal ion stabilizing the leaving group in both splicing steps suggested that the group II intron may employ a "two-metal ion" mechanism, a catalytic strategy used by a number of protein phosphoester transfer enzymes. Using metal rescue experiments, we now reveal the presence of a second metal ion required for nucleophile activation in the exon-ligation step of group II intron splicing. Coupled with biochemical and structural evidence of at least two metal ions at the group I intron reaction center, these results suggest a mechanistic paradigm for describing catalysis by large ribozymes.

Uncoupling metallonuclease metal ion binding sites via nudge mutagenesis

The hydrolysis of phosphodiester bonds by nucleases is critical to nucleic acid processing. Many nucleases utilize metal ion cofactors, and for a number of these enzymes two active-site metal ions have been detected. Testing proposed mechanistic roles for individual bound metal ions has been hampered by the similarity between the sites and cooperative behavior. In the homodimeric PvuII restriction endonuclease, the metal ion dependence of DNA binding is sigmoidal and consistent with two classes of coupled metal ion binding sites. We reasoned that a conservative active-site mutation would perturb the ligand field sufficiently to observe the titration of individual metal ion binding sites without significantly disturbing enzyme function. Indeed, mutation of a Tyr residue 5.5 A from both metal ions in the enzyme-substrate crystal structure (Y94F) renders the metal ion dependence of DNA binding biphasic: two classes of metal ion binding sites become distinct in the presence of DNA. The perturbation in metal ion coordination is supported by 1H-15N heteronuclear single quantum coherence spectra of enzyme-Ca(II) and enzyme-Ca(II)-DNA complexes. Metal ion binding by free Y94F is basically unperturbed: through multiple experiments with different metal ions, the data are consistent with two alkaline earth metal ion binding sites per subunit of low millimolar affinity, behavior which is very similar to that of the wild type. The results presented here indicate a role for the hydroxyl group of Tyr94 in the coupling of metal ion binding sites in the presence of DNA. Its removal causes the affinities for the two metal ion binding sites to be resolved in the presence of substrate. Such tuning of metal ion affinities will be invaluable to efforts to ascertain the contributions of individual bound metal ions to metallonuclease function.

Metal-binding sites at the active site of restriction endonuclease BamHI can conform to a one-ion mechanism

The number of metal ions required for phosphoryl transfer in restriction endonucleases is still an unresolved question in molecular biology. The two Ca(2+) and Mn(2+) ions observed in the pre- and post-reactive complexes of BamHI conform to the classical two-metal ion choreography. We probed the Mg(2+) cofactor positions at the active site of BamHI by molecular dynamics simulations with one and two metal ions present and identified several catalytically relevant sites. These can mark the pathway of a single ion during catalysis, suggesting its critical role, while a regulatory function is proposed for a possible second ion.

DNA cleavage by the A22R resolvase of vaccinia virus

Vaccinia virus encodes an enzyme, A22R, required during DNA replication for cleaving viral DNA concatamers to yield unit-length viral genomes. The concatamer junctions contain inverted repeat sequences that can be extruded as cruciforms, yielding Holliday junctions. Previous work indicated that A22R can cleave Holliday junctions in vitro. To investigate the mechanism of action of A22R, we have optimized reaction conditions and characterized the sequence specificity of cleavage. We found that addition of 20% dimethylsulfoxide boosted product formation six-fold, resulting in improved sensitivity of cleavage assays. To analyze cleavage specificity, we took advantage of mobile Holliday junctions, in which branch migration allowed sampling of many DNA sequences. We found that A22R weakly favors cleavage at the sequence 5'-(G/C) downward arrow(A/T)-3', and so is much less sequence specific than its Escherichia coli relative, RuvC. Analysis of the reaction products revealed that A22R cleaves to leave a 3' hydroxyl at the cleaved phosphodiester bond.

Mechanistic aspects of the DNA junction-resolving enzyme T7 endonuclease I

The chemical mechanism of phosphodiester bond hydrolysis catalyzed by a junction-resolving enzyme has been investigated. Endonuclease I of phage T7 is a member of the nuclease superfamily of proteins that include many restriction enzymes, and the structure of the active site is very similar to that of BglI in particular. It contains three acidic amino acids that coordinate two divalent metal ions. Using mass spectrometry we have shown that endonuclease I catalyzes the breakage of the P-O3' bond, in common with restriction enzymes. We have found that the pH dependence of the hydrolysis reaction is log-linear, with a gradient of 0.9. Substitution of the scissile phosphate by an electrically neutral methylphosphonate significantly impairs the rate of bond cleavage. However, the introduction of chirally pure methylphosphonate groups shows that the effect of substitution of the proS oxygen atom is much greater than that for the proR. This is consistent with our current model of the structure of the DNA bound in the active site of endonuclease I, where the proS oxygen atom is coordinated directly to both metal ions as it is in BglI. The activity is also very sensitive to repositioning of the carboxylate groups of Asp 55 and Glu 65 in the active site, although some restoration of activity in endonuclease I E65D was observed in the presence of Mn2+ ions. A mechanism of hydrolysis consistent with all of these data is proposed.

Structural recognition between a four-way DNA junction and a resolving enzyme

Resolving enzymes bind highly selectively to four-way DNA junctions, but the mechanism of this structural specificity is poorly understood. In this study, we have explored the role of interactions between the dimeric enzyme and the helical arms of the junction, using junctions with either shortened arms, or circular permutation of arms. We find that DNA-protein contacts in the arms containing the 5' ends of the continuous strands are very important, conferring a significant level of sequence discrimination upon both the choice of conformer and the order of strand cleavage. We have exploited these properties to obtain hydroxyl radical footprinting data on endonuclease I-junction complexes that are not complicated by the presence of alternative conformers, with results that are in good agreement with the arm permutation and shortening experiments. Substitution of phosphate groups at the center of the junction reveals the importance of electrostatic interactions at the point of strand exchange in the complex. Our data show that the form of the complex between endonuclease I and a DNA junction depends on the core of the junction and on interactions with the first six base-pairs of the arms containing the 5' ends of the continuous strands.

The effect of manganese(II) on the structure of DNA/HMGB1/H1 complexes: Electronic and vibrational circular dichroism studies

The interactions were studied of DNA with the nonhistone chromatin protein HMGB1 and histone H1 in the presence of manganese(II) ions at different protein to DNA and manganese to DNA phosphate ratios by using absorption and optical activity spectroscopy in the electronic [ultraviolet (UV) and electronic circular dichroism ECD)] and vibrational [infrared (IR) and vibrational circular dichroism (VCD)] regions. In the presence of Mn2+, the protein-DNA interactions differ from those without the ions and cause prominent DNA compaction and formation of large intermolecular complexes. At the same time, the presence of HMGB1 and H1 also changed the mode of interaction of Mn2+ with DNA, which now takes place mostly in the major groove of DNA involving N7(G), whereas interactions between Mn2+ and DNA phosphate groups are weakened by histone molecules. Considerable interactions were also detected of Mn2+ ions with aspartic and glutamic amino acid residues of the proteins.

Identification of novel restriction endonuclease-like fold families among hypothetical proteins

Restriction endonucleases and other nucleic acid cleaving enzymes form a large and extremely diverse superfamily that display little sequence similarity despite retaining a common core fold responsible for cleavage. The lack of significant sequence similarity between protein families makes homology inference a challenging task and hinders new family identification with traditional sequence-based approaches. Using the consensus fold recognition method Meta-BASIC that combines sequence profiles with predicted protein secondary structure, we identify nine new restriction endonuclease-like fold families among previously uncharacterized proteins and predict these proteins to cleave nucleic acid substrates. Application of transitive searches combined with gene neighborhood analysis allow us to confidently link these unknown families to a number of known restriction endonuclease-like structures and thus assign folds to the uncharacterized proteins. Finally, our method identifies a novel restriction endonuclease-like domain in the C-terminus of RecC that is not detected with structure-based searches of the existing PDB database.

Mechanistic insights from the structures of HincII bound to cognate DNA cleaved from addition of Mg2+ and Mn2+

The three-dimensional X-ray crystal structures of HincII bound to cognate DNA containing GTCGAC and Mn(2+) or Mg(2+), at 2.50A and 2.95A resolution, respectively, are presented. In both structures, the DNA is found cleaved, and the positions of the active-site groups, cleaved phosphate group, and 3' oxygen atom of the leaving group are in very similar positions. Two highly occupied Mn(2+) positions are found in each active site of the four crystallographically independent subunit copies in the HincII/DNA/Mn(2+) structure. The manganese ion closest to the previously identified single Ca(2+) position of HincII is shifted 1.7A and has lost direct ligation to the active-site aspartate residue, Asp127. A Mn(2+)-ligated water molecule in a position analogous to that seen in the HincII/DNA/Ca(2+) structure, and proposed to be the attacking nucleophile, is beyond hydrogen bonding distance from the active-site lysine residue, Lys129, but remains within hydrogen bonding distance from the proRp oxygen atom of the phosphate group 3' to the scissile phosphate group. In addition, the position of the cleaved phosphate group is on the opposite side of the axis connecting the two metal ions relative to that found in the BamHI/product DNA/Mn(2+) structure. Mechanistic implications are discussed, and a model for the two-metal-ion mechanism of DNA cleavage by HincII is proposed.

Conformational model of the Holliday junction transition deduced from molecular dynamics simulations

Homologous recombination plays a key role in the restart of stalled replication forks and in the generation of genetic diversity. During this process, two homologous DNA molecules undergo strand exchange to form a four-way DNA (Holliday) junction. In the presence of metal ions, the Holliday junction folds into the stacked-X structure that has two alternative conformers. Experiments have revealed the spontaneous transitions between these conformers, but their detailed pathways are not known. Here, we report a series of molecular dynamics simulations of the Holliday junction at physiological and elevated (400 K) temperatures. The simulations reveal new tetrahedral intermediates and suggest a schematic framework for conformer transitions. The tetrahedral intermediates bear resemblance to the junction conformation in complex with a junction-resolving enzyme, T7 endonuclease I, and indeed, one intermediate forms a stable complex with the enzyme as demonstrated in one simulation. We also describe free energy minima for various states of the Holliday junction system, which arise during conformer transitions. The results show that magnesium ions stabilize the stacked-X form and destabilize the open and tetrahedral intermediates. Overall, our study provides a detailed dynamic model of the Holliday junction undergoing a conformer transition.

Substrate recognition and catalysis by the Holliday junction resolving enzyme Hje

Two archaeal Holliday junction resolving enzymes, Holliday junction cleavage (Hjc) and Holliday junction endonuclease (Hje), have been characterized. Both are members of a nuclease superfamily that includes the type II restriction enzymes, although their DNA cleaving activity is highly specific for four-way junction structure and not nucleic acid sequence. Despite 28% sequence identity, Hje and Hjc cleave junctions with distinct cutting patterns--they cut different strands of a four-way junction, at different distances from the junction centre. We report the high-resolution crystal structure of Hje from Sulfolobus solfataricus. The structure provides a basis to explain the differences in substrate specificity of Hje and Hjc, which result from changes in dimer organization, and suggests a viral origin for the Hje gene. Structural and biochemical data support the modelling of an Hje:DNA junction complex, highlighting a flexible loop that interacts intimately with the junction centre. A highly conserved serine residue on this loop is shown to be essential for the enzyme's activity, suggesting a novel variation of the nuclease active site. The loop may act as a conformational switch, ensuring that the active site is completed only on binding a four-way junction, thus explaining the exquisite specificity of these enzymes.

Changing the Enzymatic Activity of T7 Endonuclease by Mutations at the β-Bridge Site: Alteration of Substrate Specificity Profile and Metal Ion Requirements by Mutation Distant from the Catalytic Domain

Phage-encoded resolvase T7 endonuclease I is a structure-specific endonuclease. The enzyme acts on a broad spectrum of substrates with a variety of DNA structures. The enzyme is a dimer with two separated catalytic domains connected by an elongated beta-sheet bridge. The activities of enzymes with mutations in the beta-bridge segment were studied. Mutations that did not affect catalytic domain folding and function but did alter the relative positions of these domains retained catalytic activity but with altered specificity and metal ion dependence. Our results suggest that the enzyme recognizes its substrates by DNA conformation exclusion and offer a simple explanation for the broad substrate specificity of phage resolvase.

The effect of manganese(II) on DNA structure: electronic and vibrational circular dichroism studies

The interaction of DNA with Mn2+ was studied in absorbance and optical activity in the electronic and vibrational regions. Based on the data, several stages of the interaction were identified. Con formational transition towards the C-form of DNA was observed in solution at the molar ratio Mn2+/DNA-phosphates between 0.1 and 1.5. The exact ratio depended on the ionic strength and increased with increasing NaCl concentration. Although manganese interacted with the phosphates and bases of DNA at higher metal concentrations, it is unlikely that direct chelation occurred. A model for the interaction between manganese ions and DNA mediated by water is suggested destabilizing the double helix and partially breaking the hydrogen bonds between the base pairs. At high Mn2+ concentrations DNA aggregation was observed.

A survey of the year 2002 literature on applications of isothermal titration calorimetry

Isothermal titration calorimetry (ITC) is becoming widely accepted as a key instrument in any laboratory in which quantification of biomolecular interactions is a requisite. The method has matured with respect to general acceptance and application development over recent years. The number of publications on ITC has grown exponentially over the last 10 years, reflecting the general utility of the method. Here all the published works of the year 2002 in this area have been surveyed. We review the broad range of systems to which ITC is being directed and classify these into general areas highlighting key publications of interest. This provides an overview of what can be achieved using this method and what developments are likely to occur in the near future.

The Structure of Escherichia coli RusA Endonuclease Reveals a New Holliday Junction DNA Binding Fold

Holliday junction resolution performed by a variety of structure-specific endonucleases is a key step in DNA recombination and repair. It is believed that all resolvases carry out their reaction chemistries in a similar fashion, utilizing a divalent cation to facilitate the hydrolysis of the phosphodiester backbone of the DNA, but their architecture varies. To date, with the exception of bacteriophage T4 endonuclease VII, each of the known resolvase enzyme structures has been categorized into one of two families: the integrases and the nucleases. We have now determined the structure of the Escherichia coli RusA Holliday junction resolvase, which reveals a fourth structural class for these enzymes. The structure suggests that dimer formation is essential for Mg(2+) cation binding and hence catalysis and that like the other resolvases, RusA distorts its Holliday junction target upon binding. Key residues identified by mutagenesis experiments are well positioned to interact with the DNA.

Metal Ion Binding in the Active Site of the Junction-resolving Enzyme T7 Endonuclease I in the Presence and in the Absence of DNA

Endonuclease I of bacteriophage T7 is a DNA junction-resolving enzyme. We have previously used crystallography to demonstrate the binding of two manganese ions into the active site that is formed by three carboxylate (Glu 20, Asp 55 and Glu 65) and a lysine residue (Lys 67). Endonuclease I is active in the presence of magnesium, manganese, iron (II) and cobalt (II) ions, weakly active in the presence of nickel, copper (II) and zinc ions, and completely inactive in the presence of calcium ions. However, using calorimetry, we have observed the binding of two calcium ions to the free enzyme in a manner very similar to the binding of manganese ions. In the presence of iron (II) ions, we have obtained a cleavage of the continuous strands of a junction bound by endonuclease I, at sites close to (but not identical with) enzyme-induced hydrolysis. The results suggest that this arises from attack by locally generated hydroxyl radicals, arising from iron (II) ions bound into the active site. This therefore provides an indirect way of examining metal ion binding in the enzyme-junction complex. Ion binding in free protein (by calorimetry) and the enzyme-junction complex (iron-induced cleavage) have been studied in series of active-site mutants. Both confirm the importance of the three carboxylate ligands, and the lack of a requirement for Lys67 for the ion binding. Calorimetry points to particularly critical role of Asp55, as mutation completely abolishes all binding of both manganese and calcium ions.

The complex between a four-way DNA junction and T7 endonuclease I

The junction-resolving enzyme endonuclease I is selective for the structure of the DNA four-way (Holliday) junction. The enzyme binds to a four-way junction in two possible orientations, with a 4:1 ratio, opening the DNA structure at the centre and changing the global structure into a 90 degrees cross of approximately coaxial helices. The nuclease cleaves the continuous strands of the junction in each orientation. Binding leads to pronounced regions of protection of the DNA against hydroxyl radical attack. Using all this information together with the known structure of the enzyme and the structure of the BglI-DNA complex, we have constructed a model of the complex of endonuclease I and a DNA junction. This shows how the enzyme is selective for the structure of a four-way junction, such that both continuous strands can be accommodated into the two active sites so that a productive resolution event is possible.

Dynamic evidence for metal ion catalysis in the reaction mediated by a flap endonuclease

On the basis of structural work, metal ions are proposed to play a catalytic role in reactions mediated by many phosphoryl transfer enzymes. To gain dynamic support for such mechanisms, the role of metal ion cofactors in phosphate diester hydrolysis catalysed by a flap endonuclease has been studied. The pH maximal rate profiles were measured in the presence of various metal ion cofactors; in each case, a single ionic form of the enzyme/cofactor accounts for the pH dependence. The kinetic pK(a)s display good correlation with the acidity of the corresponding hexahydrated metal ions, which strongly suggests a role for metal-bound hydroxide, or its equivalent ionic species, in the reaction. Comparing rates of reaction in the pH-independent regions, a small negative beta(nuc) value is observed. This suggests that expected trends in the nucleophilicity of the various metal-bound hydroxides are balanced by a second form of metal ion catalysis that is related to the acidity of the hexahydrated metal ion. This is likely to be either electrophilic catalysis or leaving group activation.

Structure and function of nucleases in DNA repair: shape, grip and blade of the DNA scissors

DNA nucleases catalyze the cleavage of phosphodiester bonds. These enzymes play crucial roles in various DNA repair processes, which involve DNA replication, base excision repair, nucleotide excision repair, mismatch repair, and double strand break repair. In recent years, new nucleases involved in various DNA repair processes have been reported, including the Mus81 : Mms4 (Eme1) complex, which functions during the meiotic phase and the Artemis : DNA-PK complex, which processes a V(D)J recombination intermediate. Defects of these nucleases cause genetic instability or severe immunodeficiency. Thus, structural biology on various nuclease actions is essential for the elucidation of the molecular mechanism of complex DNA repair machinery. Three-dimensional structural information of nucleases is also rapidly accumulating, thus providing important insights into the molecular architectures, as well as the DNA recognition and cleavage mechanisms. This review focuses on the three-dimensional structure-function relationships of nucleases crucial for DNA repair processes.