Combined treatment of pulsed light and nisin-organic acid based antimicrobial wash for inactivation of Escherichia coli O157:H7 in Romaine lettuce, reduction of microbial loads, and retention of quality

Microbial safety of fresh produce continues to be a major concern. Novel antimicrobial methods are needed to minimize the risk of contamination. This study investigated the antimicrobial efficacy of pulsed light (PL), a novel nisin-organic acid based antimicrobial wash (AW) and the synergy thereof in inactivating E. coli O157:H7 on Romaine lettuce. Treatment effects on background microbiota and produce quality during storage at 4 °C for 7 days was also investigated. A bacterial cocktail containing three outbreak strains of E. coli O157:H7 was used as inoculum. Lettuce leaves were spot inoculated on the surface before treating with PL (1-60 s), AW (2 min) or combinations of PL with AW. PL treatment for 10 s, equivalent to fluence dose of 10.5 J/cm2, was optimal and resulted in 2.3 log CFU/g reduction of E. coli O157:H7, while a 2 min AW treatment, provided a comparable pathogen reduction of 2.2 log CFU/g. Two possible treatment sequences of PL and AW combinations were investigated. For PL-AW combination, inoculated lettuce leaves were initially exposed to optimum PL dose followed by 2 min AW treatment, whereas for AW-PL combination, inoculated lettuce were subjected to 2 min AW treatment prior to 10 s PL treatment. Both combination treatments (PL-AW and AW-PL) resulted in synergistic inactivation as E. coli cells were not detectable after treatment, indicating >5 log pathogen reductions. Combination treatments significantly (P < 0.05) reduced spoilage microbial populations on Romaine lettuce and also hindered their growth in storage for 7 days. The firmness and visual quality appearance of lettuce were not significantly (P > 0.05) influenced due to combination treatments. Overall, the results reveal that PL and AW combination treatments can be implemented as a novel approach to enhance microbial safety, quality and shelf life of Romaine lettuce.

Radical species generating technologies for decontamination of Listeria species in food: a recent review report

Foodborne illnesses occur due to the contamination of fresh, frozen, or processed food products by some pathogens. Among several pathogens responsible for the illnesses, Listeria monocytogenes is one of the lethal bacteria that endangers public health. Several preexisting and novel technologies, especially non-thermal technologies are being studied for their antimicrobial effects, particularly toward L. monocytogenes. Some noteworthy emerging technologies include ultraviolet (UV) or light-emitting diode (LED), pulsed light, cold plasma, and ozonation. These technologies are gaining popularity since no heat is employed and undesirable deterioration of food quality, especially texture, and taste is devoided. This review aims to summarize the most recent advances in non-thermal processing technologies and their effect on inactivating L. monocytogenes in food products and on sanitizing packaging materials. These technologies use varying mechanisms, such as photoinactivation, photosensitization, disruption of bacterial membrane and cytoplasm, etc. This review can help food processing industries select the appropriate processing techniques for optimal benefits, in which the structural integrity of food can be preserved while simultaneously destroying L. monocytogenes present in foods. To eliminate Listeria spp., different technologies possess varying mechanisms such as rupturing the cell wall, formation of pyrimidine dimers in the DNA through photochemical effect, excitation of endogenous porphyrins by photosensitizers, generating reactive species, causing leakage of cellular contents and oxidizing proteins and lipids. These technologies provide an alternative to heat-based sterilization technologies and further development is still required to minimize the drawbacks associated with some technologies.

Physical Treatments to Control Clostridium botulinum Hazards in Food

Clostridium botulinum produces Botulinum neurotoxins (BoNTs), causing a rare but potentially deadly type of food poisoning called foodborne botulism. This review aims to provide information on the bacterium, spores, toxins, and botulisms, and describe the use of physical treatments (e.g., heating, pressure, irradiation, and other emerging technologies) to control this biological hazard in food. As the spores of this bacterium can resist various harsh environmental conditions, such as high temperatures, the thermal inactivation of 12-log of C. botulinum type A spores remains the standard for the commercial sterilization of food products. However, recent advancements in non-thermal physical treatments present an alternative to thermal sterilization with some limitations. Low- (<2 kGy) and medium (3-5 kGy)-dose ionizing irradiations are effective for a log reduction of vegetative cells and spores, respectively; however, very high doses (>10 kGy) are required to inactivate BoNTs. High-pressure processing (HPP), even at 1.5 GPa, does not inactivate the spores and requires heat combination to achieve its goal. Other emerging technologies have also shown some promise against vegetative cells and spores; however, their application to C. botulinum is very limited. Various factors related to bacteria (e.g., vegetative stage, growth conditions, injury status, type of bacteria, etc.) food matrix (e.g., compositions, state, pH, temperature, aw, etc.), and the method (e.g., power, energy, frequency, distance from the source to target, etc.) influence the efficacy of these treatments against C. botulinum. Moreover, the mode of action of different physical technologies is different, which provides an opportunity to combine different physical treatment methods in order to achieve additive and/or synergistic effects. This review is intended to guide the decision-makers, researchers, and educators in using physical treatments to control C. botulinum hazards.

The Impact of a Pulsed Light Stream on the Quality and Durability of the Cold-Stored Longissimus Dorsal Muscle of Pigs

The purpose of this study was to investigate the effect of pulsed light application (exposure to a pulsed light beam (PL) of 400 Hz for a period of 60 s, with an energy dose of 600 mW and wavelengths of 660 and 405 nm) on the physicochemical, technological, and sensory properties, as well as the nutritional value and shelf life of cold-storage pig longissimus dorsi muscle. Each muscle was divided into six parts, three of which were control samples, and the rest were exposed to pulsed light. The detailed laboratory tests of the meat were conducted 1, 7, and 10 days after slaughter. The meat was cold stored at +3 °C ± 0.5 °C. The study showed that the application of pulsed light has a favorable effect on lowering the TBARS index, oxidation-reduction potential, and water activity values. In addition, the application of PL had no statistically significant effect on the variation in the perception of selected sensory characteristics of meat. Furthermore, PL processing, as a low-energy-intensive method that can be environmentally friendly and thus have a large potential for implementation, is an innovative way to extend the shelf life, especially of raw meat, without a negative impact on its quality. This is of particular importance for food security (especially in the quantitative and qualitative aspects of food, but also in terms of food safety).

Comparison of microbial reduction effect of intense pulsed light according to growth stage and population density of Escherichia coli ATCC 25922 using a double Weibull model

This study evaluated how the efficacy of intense pulsed light (IPL) was influenced by biological factors such as the incubation time and the population of Escherichia coli. According to the 4D value, the microorganisms in the exponential phase were more susceptible to IPL (0.51 J/cm²), while those in the stationary phase were the most resistant (0.67 J/cm²). The microorganisms in the exponential phase could have more critical DNA damage. In addition, the degree of inactivation was affected by the microbial population. When the population was 10⁹ CFU/ml, a maximum 3.4-log reduction was observed after applying IPL at 12.5 J/cm². In contrast, a population with a density of 10¹⁰ CFU/ml showed maximally 0.13-log reduction when IPL was applied at 18.7 J/cm². This large difference might have been due to cell distribution and aggregation. The study is expected to contribute to the analytical confirmation of the microbial reduction mechanism through non-thermal technologies.

Recent advances in sterilization and disinfection technology: A review

Sterilization and disinfection of pollutants and microorganisms have been extensively studied in order to address the problem of environmental contamination, which is a crucial issue for public health and economics. Various form of hazardous materials/pollutants including microorganisms and harmful gases are released into the environment that enter into the human body either through inhalation, adsorption or ingestion. The human death rate rises due to various respiratory ailments, strokes, lung cancer, and heart disorders related with these pollutants. Hence, it is essential to control the environmental pollution by applying economical and effective sterilization and disinfections techniques to save life. In general, numerous forms of traditional physical and chemical sterilization and disinfection treatments, such as dry and moist heat, radiation, filtration, ethylene oxide, ozone, hydrogen peroxide, etc. are known along with advanced techniques. In this review we summarized both advanced and conventional techniques of sterilization and disinfection along with their uses and mode of action. This review gives the knowledge about the advantages, disadvantages of both the methods comparatively. Despite, the effective solution given by the advanced sterilization and disinfection technology, joint technologies of sterilization and disinfection has proven to be more effective innovation to protect the indoor and outdoor environments.

Single, Subsequent, or Simultaneous Treatments to Mitigate Mycotoxins in Solid Foods and Feeds: A Critical Review

Mycotoxins in solid foods and feeds jeopardize the public health of humans and animals and cause food security issues. The inefficacy of most preventive measures to control the production of fungi in foods and feeds during the pre-harvest and post-harvest stages incited interest in the mitigation of these mycotoxins that can be conducted by the application of various chemical, physical, and/or biological treatments. These treatments are implemented separately or through a combination of two or more treatments simultaneously or subsequently. The reduction rates of the methods differ greatly, as do their effect on the organoleptic attributes, nutritional quality, and the environment. This critical review aims at summarizing the latest studies related to the mitigation of mycotoxins in solid foods and feeds. It discusses and evaluates the single and combined mycotoxin reduction treatments, compares their efficiency, elaborates on their advantages and disadvantages, and sheds light on the treated foods or feeds, as well as on their environmental impact.

Lifestyle of Listeria monocytogenes and food safety: Emerging listericidal technologies in the food industry

Listeria monocytogenes, a causative agent of listeriosis, is a major foodborne pathogen. Among pathogens, L. monocytogenes stands out for its unique ecological and physiological characteristics. This distinct lifestyle of L. monocytogenes has a significant impact on food safety and public health, mainly through the ability of this pathogen to multiply at refrigeration temperature and to persist in the food processing environment. Due to a combination of these characteristics and emerging trends in consumer preference for ready-to-eat and minimally processed food, there is a need to develop effective and sustainable approaches to control contamination of food products with L. monocytogenes. Implementation of an efficient and reliable control strategy for L. monocytogenes must first address the problem of cross-contamination. Besides the preventive control strategies, cross-contamination may be addressed with the introduction of emerging post packaging non-thermal or thermal hurdles that can ensure delivery of a listericidal step in a packed product without interfering with the organoleptic characteristics of a food product. This review aims to present the most relevant findings underlying the distinct lifestyle of L. monocytogenes and its impact on food safety. We also discuss emerging food decontamination technologies that can be used to better control L. monocytogenes.

Inactivation of hepatitis A virus and norovirus on berries by broad-spectrum pulsed light

Foodborne diseases are still a major global health and economic burden, and are mainly caused by viral pathogens, such as human norovirus and hepatitis A virus, which may remain infective for long times on food contact surfaces and on produce. The strategies of viral inactivation applied in the industry are not generally suitable for delicate foods such as berries. Brief exposure to high-intensity white light (UV to IR) has been shown to inactivate many bacteria. The effectiveness of this treatment against foodborne viruses on fresh produce is largely unknown. We show that pulsed light treatment causes a moderate drop in the luminosity (L*, which ranges from bright (high) to dark (low)) of blueberries (to 36.31 ± 0.99 from 42.47 ± 1.17) and affects the luminosity of lettuce slightly but does not affect the appearance of strawberries, blackberries or raspberries. Hepatitis A virus and murine norovirus 1 are thus reduced by 2 log cycles. Viral inactivation on blackberries was less effective. These results will help food industries evaluate the suitability of pulsed light disinfecting technology for specific fruits and vegetables.

Postharvest Treatment of Chinese Kale (Brassica oleracea var. alboglabra) by Pulse Light to Removal of Microbial Load, Pesticide Residue and Integrity of Physicochemical Quality and Phytochemical Constituent

Existence of microorganisms, pesticide residue on fresh vegetables has a potential hazard to human health. The demand for safe green Chinese kale (Brassica oleracea var. alboglabra) has increased recently. Chinese kale is a healthy botanical attached to the Brassicaceae class. It contains numerous nutritional and phytochemical constituents beneficial for human health. Besides health benefits, this green vegetable also poses food safety concerns due to pathogen and pesticide residue during cultivation. Non-thermal physical technology like pulsed light (PL) will be a promising alternative to eradicate microbial and pesticide residue while preserving the best physicochemical properties and phytochemical components. This research evaluated the influence of different pulsed light intensities (1.2-10.8 J/cm2) on the removal of microbial load and pesticide residue as well as weight attrition, texture hardness, dry matter, vitamin C, total phenolic content in the treated Chinese kale. Results showed that pulsed light intensity 8.4 J/cm2 was appropriate to completely eliminate pathogenic bacteria such as Escherichia coli, Staphylococcus aureus, Salmonella; pesticide substances such as carbendazim, abamectin, cypermethrin, chlorpyrifos ethyl, mancozeb. At pulsed light intensity 8.4 J/cm2, weight attrition in the treated sample was lower than weight attrition in the untreated; meanwhile textural hardness, dry matter, ascorbic acid and total phenolic content remained higher in the treated sample compared to the untreated. The results reveals that the pulsed light technique should be applied as a promising decontamination approach for removal of the pathogen as well as pesticide residue with minor impact on physicochemical properties and phytochemical constituents.

Pasteurization of fruit juices by pulsed light treatment: A review on the microbial safety, enzymatic stability, and kinetic approach to process design

Pulsed light (PL) is a polychromatic radiation-based technology, among many other non-thermal processing techniques. The microbiological lethality of the PL technique has been explored in different food matrices along with their associated mechanisms. Pasteurization of fruit juice requires a 5-log cycle reduction in the resistant pathogen in the product. The manufacturers look toward achieving the microbial safety and stability of the juice, while consumers demand high-quality juice. Enzymatic spoilage in fruit juice is also a crucial factor that needs attention. The retailers want the processed juice to be stable, which can be achieved by inactivating the spoilage enzymes and native microflora inside it. The present review argued about the potential of PL technology to produce a microbiologically safe and enzymatically stable fruit juice with a minimal loss in bioactive compounds in the product. Concise information of factors affecting the PL treatment (PLT), primary inactivation mechanism associated with microorganisms, enzymes, the effect of PLT on various quality attributes (microorganisms, spoilage enzymes, bioactive components, sensory properties, color), and shelf life of fruit juices has been put forward. The potential of PL integrated with other non-thermal and mild thermal technologies on the microbial safety and stability of fruit juices has been corroborated. The review also provides suggestions to the readers for designing, modeling, and optimizing the PLT and discusses the use of various primary, secondary kinetic models in detail that have been utilized for different quality parameters in juices. Finally, the challenges and future need associated with PL technology has been summarized.

Impact of factors affecting the efficacy of intense pulsed light for reducing Bacillus subtilis spores

This study investigated how the following four intense pulsed light (IPL) treatment factors affect the inactivation of Bacillus subtilis (KCCM 11,315) spores: distance between the sample and IPL lamp (8, 13, and 18 cm), pulse width (0.5, 1.3, and 2.1 ms), charging voltage (1000, 1200, and 1400 V), and processing time (10, 20, and 30 s). The results showed that all four factors considerably influenced the spore inactivation rate in different ways. Excluding processing time, which does not affect the pulse itself, the effect was largest for pulse width, followed by distance, and charging voltage. The optimal treatment condition that maximized the inactivation rate was a distance of 8 cm, a pulse width of 2.1 ms, a charging voltage of 1000 V, and a processing time of 30 s, which together produced a 6 log reduction. It revealed that individual factors need to be investigated together for achieving the optimal condition of IPL.

Development of Strategies to Minimize the Risk of Listeria monocytogenes Contamination in Radish, Oriental Melon, and Carrots

Contamination by Listeria monocytogenes in packaged produce is a major concern. The purpose of this study was to find natural and affordable sanitizers to reduce L. monocytogenes contamination in agricultural products. Organic acids, ultraviolet-C (UV-C), and ethanol were analyzed either alone or in combination to assess their ability to reduce L. monocytogenes population in radish, oriental melon, and carrot samples. In radish samples, 3% malic acid combined with UV-C at a dosage of 144 mj/cm² significantly reduced (>4 log CFU/g) the population of L. monocytogenes (1.44 ± 0.5) compared to the control sample (5.14 ± 0.09). In the case of the melon samples, exposure to UV-C at a dosage of 144 mj/cm² combined with 3% lactic acid (2.73 ± 0.75) or 50% ethanol (2.30 ± 0.01) was effective against L. monocytogenes compared to the control sample (5.10 ± 0.19). In carrot samples, 3% lactic acid combined with 144 mj/cm² dosage UV-C reduced L. monocytogenes population (4.48 ± 0.25) more than in the control sample (5.85 ± 0.08). These results reveal that sanitizers that are effective for one crop are less effective for another crop indicating that effective prevention methods should be customized for each crop to prevent pathogen cross contamination during postharvest washing.

The effect of intense pulsed light on the sensory properties of nonfat dry milk

Our objectives were to examine (1) how intense pulsed light (IPL) processing parameters (exposure time and initial temperature) affected aroma, flavor, and mouthfeel of nonfat dry milk, (2) which levels of each parameter produced aroma, flavor, and mouthfeel changes from an untreated control sample, and (3) whether minimal or intense processing conditions produced a noticeable appearance change from the control. Four exposure times (1, 2, 3, and 4 passes through the IPL chamber) and three initial temperatures (25, 30, and 35℃) were studied with untreated milk powder as the control. The samples were prepared as both milk powder and reconstituted milk for sensory evaluation. Using standard evaluating protocols, trained descriptive analysis panelists rated the aroma, flavor, and mouthfeel of these samples. Panelists compared the appearance of the IPL-treated samples that underwent a minimal or intense processing condition to the control by using a two-out-of-five difference test. Increasing the exposure time led to increased intensities of overall flavor, burnt flavor, and umami taste in both milk powder and reconstituted milk, while increasing temperature increased animal and sulfur aromas in reconstituted milk only. Compared to the control, all levels of exposure time at any initial temperature resulted in increased aroma and flavor including cardboard aroma, sulfur aroma, and brothy flavor in both milk powder and reconstituted milk. Only the 4-pass exposure at the initial temperature of 25℃ changed the appearance of milk powder. However, the appearance change was not noticeable in reconstituted milk. PRACTICAL APPLICATION: The standard evaluation protocols and lexicons provide useful tools for research on milk powder. Additionally, the understanding of critical factors impacting sensory properties will contribute to a better implementation of this decontamination technology.

Revisiting Non-Thermal Food Processing and Preservation Methods-Action Mechanisms, Pros and Cons: A Technological Update (2016-2021)

The push for non-thermal food processing methods has emerged due to the challenges associated with thermal food processing methods, for instance, high operational costs and alteration of food nutrient components. Non-thermal food processing involves methods where the food materials receive microbiological inactivation without or with little direct application of heat. Besides being well established in scientific literature, research into non-thermal food processing technologies are constantly on the rise as applied to a wide range of food products. Due to such remarkable progress by scientists and researchers, there is need for continuous synthesis of relevant scientific literature for the benefit of all actors in the agro-food value chain, most importantly the food processors, and to supplement existing information. This review, therefore, aimed to provide a technological update on some selected non-thermal food processing methods specifically focused on their operational mechanisms, their effectiveness in preserving various kinds of foods, as revealed by their pros (merits) and cons (demerits). Specifically, pulsed electric field, pulsed light, ultraviolet radiation, high-pressure processing, non-thermal (cold) plasma, ozone treatment, ionizing radiation, and ultrasound were considered. What defines these techniques, their ability to exhibit limited changes in the sensory attributes of food, retain the food nutrient contents, ensure food safety, extend shelf-life, and being eco-friendly were highlighted. Rationalizing the process mechanisms about these specific non-thermal technologies alongside consumer education can help raise awareness prior to any design considerations, improvement of cost-effectiveness, and scaling-up their capacity for industrial-level applications.

Emerging trends in the photodynamic inactivation (PDI) applied to the food decontamination

The food and drink manufacturing industry is constantly seeking for alternative sanitation and disinfection systems that may achieve the same antimicrobial efficiency of conventional chemical sanitisers and at the same time be convenient in terms of energy and water savings. A candidate technology for this purpose is the use of light in combination with photosensitisers (PS) to generate a bioactive effect against microbial agents in a process defined as photodynamic inactivation (PDI). This technology can be applied to the food processing of different food matrices to reduce the microbial load of foodborne pathogens such as bacteria, fungi, viruses and protozoa. Also, the PDI can be exploited to increase the shelf-life period of food by inactivation of spoiling microbes. This review analyses new developments in the last five years for PDI systems applied to the food decontamination from foodborne pathogens. The photosensitisation mechanisms and methods are reported to introduce the applied technology against microbial targets in food matrices. Recent blue light emitting diodes (LED) lamp systems for the PDI mediated by endogenous PS are discussed as well PDI technologies with the use of exogenous PS from plant sources such as curcumin and porphyrin-based molecules. The updated overview of the most recent developments in the PDI technology both in wavelengths and employed PS will provide further points of analysis for the advancement of the research on new competitive and effective disinfection systems in the food industry.

Application of Processing and Packaging Hurdles for Fresh-Cut Fruits and Vegetables Preservation

Recently, consumers’ demand for fresh, nutritious, and convenient food has shown a significant rise. This trend has forced increased sales of minimally processed and/or pre-packed fruit- and vegetable-based products. New product development and the diversification of plant-based foods have supported this growth. The food production sector should balance this requirement with the necessity to provide safe food with extended shelf life while meeting consumer demands for novel, nutritious, and affordable food products. The use of alternative “soft hurdles” may result in a decrease in the rate of food deterioration and spoilage attributed to microbial activity or other physiological/chemical degradation reactions. The objective of the article is to provide a systematic review of the preservative effect of the available hurdles implemented during processing and packaging of fresh-cut fruits and vegetables, focusing on recent applications aiming at improving product quality and prolonging their limited shelf life.

Development of Antimicrobial Phototreatment Tolerance: Why the Methodology Matters

Due to rapidly growing antimicrobial resistance, there is an urgent need to develop alternative, non-antibiotic strategies. Recently, numerous light-based approaches, demonstrating killing efficacy regardless of microbial drug resistance, have gained wide attention and are considered some of the most promising antimicrobial modalities. These light-based therapies include five treatments for which high bactericidal activity was demonstrated using numerous in vitro and in vivo studies: antimicrobial blue light (aBL), antimicrobial photodynamic inactivation (aPDI), pulsed light (PL), cold atmospheric plasma (CAP), and ultraviolet (UV) light. Based on their multitarget activity leading to deleterious effects to numerous cell structures-i.e., cell envelopes, proteins, lipids, and genetic material-light-based treatments are considered to have a low risk for the development of tolerance and/or resistance. Nevertheless, the most recent studies indicate that repetitive sublethal phototreatment may provoke tolerance development, but there is no standard methodology for the proper evaluation of this phenomenon. The statement concerning the lack of development of resistance to these modalities seem to be justified; however, the most significant motivation for this review paper was to critically discuss existing dogma concerning the lack of tolerance development, indicating that its assessment is more complex and requires better terminology and methodology.

Decontamination of Powdery Foods Using an Intense Pulsed Light (IPL) Device for Practical Application

Controlling microbial problems when processing seeds and powdered foods is difficult due to their low water activity, irregular surfaces, and opaqueness. Moreover, existing thermal processing can readily cause various undesirable changes in sensory properties. Intense pulsed light (IPL) can be effective in nonthermal processing, and so two xenon lamps were attached to the sides of a self-designed cyclone type of pilot-scale IPL device. Each lamp was connected to its own power supply, and the following treatment conditions were applied to four sample types: lamp DC voltage of 1800–4200 V, pulse width of 0.5–1.0 ms, frequency of 2 Hz, and treatment time of 1–5 min. This device achieved reductions of 0.45, 0.66, and 0.88 log CFU/mL for ground black pepper, red pepper, and embryo buds of rice, respectively, under a total energy fluence of 12.31 J/cm2. Meanwhile, >3-log reductions were achieved for sesame seed samples under a total energy fluence of 11.26 J/cm2. In addition, analyses of color changes, water activity, and moisture content revealed no significant differences between the control and IPL-treated samples. These findings indicate that IPL treatment may be considered a feasible sterilization method for seeds and powdered foods.

Refrigeration temperature enhanced synergistic interaction of curcumin and 460 nm light-emitting diode against Staphylococcus saprophyticus at neutral pH

Objectives

As considered highly resistant to antibiotics like mecillinam, the rise of Staphylococcus saprophyticus (S. saprophyticus) contamination of fresh foods and food processing environments necessitates the development of a new antimicrobial approach for food safety control. This study aimed to investigate the synergistic effect of food-grade curcumin (CUR) and blue light-emitting diode (LED) on S. saprophyticus.

Materials and Methods

S. saprophyticus was subjected to the synergistic treatment at 4 and 25 °C. The influence of parameters, including CUR concentration, light dose, and pH incubation time on the inactivation of S. saprophyticus was characterized through plate counting method.

Results: 

The combined treatment of CUR and blue light irradiation significantly (P &lt; 0.05) reduced bacterial counts and the antimicrobial effect was in a CUR concentration and light dose-dependent manner. Moreover, refrigeration temperature (4 °C) significantly (P &lt; 0.05) enhanced the antibacterial effect at neutral pH condition (6.2–7.2), resulting in approximately 6.0 log reductions. Under acidic condition (pH 2.2–5.2), there was no significant difference in bacterial population reduction between treatments at both temperatures.

Conclusions

These findings proposed that synergistic interaction of CUR and 460 nm LED under refrigerated temperature could enhance the inactivation of S. saprophyticus at neutral pH condition.

Strategies for Microbial Decontamination of Fresh Blueberries and Derived Products

Increasing consumption of blueberries is associated with appreciation of their organoleptic properties together with their multiple health benefits. The increasing number of outbreaks caused by pathogenic microorganisms associated with their consumption in the fresh state and the rapid spoilage of this product which is mainly caused by moulds, has led to the development and evaluation of alternatives that help mitigate this problem. This article presents different strategies ranging from chemical, physical and biological technologies to combined methods applied for microbial decontamination of fresh blueberries and derived products. Sanitizers such as peracetic acid (PAA), ozone (O3), and electrolyzed water (EOW), and physical technologies such as pulsed light (PL) and cold plasma (CP) are potential alternatives to the use of traditional chlorine. Likewise, high hydrostatic pressure (HHP) or pulsed electrical fields (PEF) successfully achieve microbial reductions in derivative products. A combination of methods at moderate intensities or levels is a promising strategy to increase microbial decontamination with a minimal impact on product quality.

Emerging Meat Processing Technologies for Microbiological Safety of Meat and Meat Products

A consumer trend toward convenient, minimally processed meat products has exerted tremendous pressure on meat processors to ensure the safety of meat and meat products without compromising product quality and the meeting of consumer demands. This has led to challenges in developing and implementing novel processing technologies as the use of newer technologies may affect consumer choices and opinions of meat and meat products. Novel technologies adopted by the meat industry for controlling foodborne pathogens of significant public health implications, gaps in the technologies, and the need for scaling up technologies that have been proven to be successful in research settings or at the pilot scale will be discussed. Novel processing technologies in the meat industry warrant microbiological validation prior to becoming commercially viable options and enacting infrastructural changes. This review presents the advantages and shortcomings of such technologies and provides an overview of technologies that can be successfully implemented and streamlined in existing processing environments.

Applications of Pulsed Light Decontamination Technology in Food Processing: An Overview

Consumers of the 21st century tend to be more aware and demand safe as well as nutritionally balanced food. Unfortunately, conventional thermal processing makes food safe at the cost of hampering nutritional value. The food industry is trying to develop non-thermal processes for food preservation. Pulsed light (PL) is one such emerging non-thermal food processing method that can decontaminate food products or food contact surfaces using white light. Exposure to intense light pulses (in infrared, visible, and ultraviolet (UV) regions) causes the death of microbial cells, rendering the food safe at room temperature. PL technology is an excellent and rapid method of disinfection of product surfaces and is increasingly being used for food surfaces and packaging decontamination, enabling the minimal processing of food. This paper aims to give an overview of the latest trends in pulsed light research, discuss principles of pulse generation, and review applications of various PL systems for the inactivation of microorganisms in vitro, in various food products, and on food contact surfaces. Effects of PL on food quality, challenges of the process, and its prospects are presented.

Efficacy of pulsed-ultraviolet light for inactivation of Salmonella spp on black peppercorns

Efficacy of pulsed ultraviolet (PUV) to inactivate Salmonella pure culture and on inoculated black peppercorns was evaluated. Black peppercorns inoculated with Salmonella were subjected to PUV treatment (0.28 J/cm² /pulse) using two different sample holders, on a traditional flat surface or on a wave-shaped surface to increase surface exposure of peppercorns to PUV through light reflection. The temperature change on black peppercorns surface during treatment was recorded, and the effect of cooling period during PUV treatment was studied. PUV treatment of two pulses reduced Salmonella population by more than 6 log CFU/mL in phosphate-buffered saline. Continuous PUV treatment (80 pulses on each side) using a wave-shaped surface was able to reduce Salmonella by 1.9 log CFU/g; same treatment using flat surface reduced Salmonella by less than 1.5 log CFU/g. The temperature on peppercorns surface increased to 65 °C after 80 pulses continuous PUV treatment. Adding 280 s cooling time after every 20 pulses reduced the temperature from 65 to 40 °C and achieved similar Salmonella inactivation (P > 0.05) as the continuous PUV treatment. Results from this study showcase the effectiveness of PUV treatment for reducing Salmonella level on black peppercorns surface and provided insights on the potential implementation of PUV treatment at the industrial level. PRACTICAL APPLICATION: Results from this study showcased the effectiveness of PUV treatment for reducing Salmonella level on black peppercorns surface and provided insights on the potential implementation of PUV treatment at the industrial level.

Sono-photodynamic inactivation of Escherichia coli and Staphylococcus aureus in orange juice

Efficiency of blue (462 ± 3 nm) light emitting diode (LED) illumination to inactivate Escherichia coli and Staphylococcus aureus in the presence of exogenous photosensitizer (curcumin) was studied in freshly squeezed orange juice. Further, the combinational effect of ultrasound (US), photosensitizer (PS) and blue light (BL) on inactivation of microbes was evaluated. The effect of process parameters such as concentration of PS, US and volume of the juice on E. coli and S. aureus inactivation was also investigated. The US alone and PS + BL treatments resulted in 3.02 ± 0.52 and 1.06 ± 0.13 log reduction of E. coli; 0.18 ± 0.14 and 2.34 ± 0.13 log reduction of S. aureus, respectively. The combination of PS + US + BL treatment at optimized conditions resulted in 2.35 ± 0.16 log reduction of S. aureus. An additive effect on the inactivation of E. coli (4.26 ± 0.32 log reduction) was observed with PS + US + BL combination treatment. The US treatment showed significant change in cloud value, colour and browning index of orange juice. The combinational non-thermal processes (PS + BL and PS + US + BL) did not have any significant effect on total phenolic content, total flavonoid content, and hesperidin content of the orange juice. However, these processes affected ascorbic acid content and antioxidant activity negatively. Thus, this study indicated that photodynamic inactivation of E. coli and S. aureus using LED-based photosensitization in fruit juices could be a potential method for microbial inactivation. Nevertheless, the effect on quality parameters needs to be considered while optimizing the process.

Comparison of Water-Assisted Decontamination Systems of Pulsed Light and Ultraviolet for Salmonella Inactivation on Blueberry, Tomato, and Lettuce

Fresh produce are vulnerable to pathogens during pre- and postharvest stages. Most fresh vegetable and fruits are consumed directly or merely washed with chlorine. We investigated two emerging decontamination technologies, pulse light (PL) and ultraviolet (UV), in combination with washing (referred as water-assisted PL [WPL] and water-assisted UV [WUV]). Blueberries, grape tomatoes, and iceberg lettuce shreds were tested in this study to represent fresh vegetables and fruits with smooth and rough surfaces. Salmonella spp. were used as a model microorganism due to its prevalence in outbreaks. Spot-inoculation and dip-inoculation were used to simulate potential contaminations during irrigation, harvest, transportation, and processing. Two intensity levels of PL (∼0.15 and 0.3 J/cm2 per pulse; 3 pulses/s) and UV (∼13 and 28 mW/cm2 ) were tested for 1 and 2 min. For all three types of fresh produce, blueberries, grape tomatoes, and iceberg lettuce shreds, WPL and WUV showed similar Salmonella inactivation effects on fresh produce. For spot-inoculated fresh produce, WPL and WUV treatments reduced 4.5 to 5.7, 4.4 to 5.4, and 1.9 to 3.1 logs of Salmonella on blueberries, tomatoes, and lettuce shreds, respectively. For dip-inoculated fresh produce, WPL and WUV treatments reduced 1.8 to 2.3, 1.9 to 2.5, and 1.9 to 2.6 logs of Salmonella on blueberries, tomatoes, and lettuce shreds, respectively. The majority of the WUV and WPL treatments could eliminate Salmonella in the wash water for blueberries and tomatoes, but not for lettuce. PRACTICAL APPLICATION: Two light systems, pulsed light and UV, for decontamination of fresh produce were evaluated and compared. Results demonstrated that the two systems showed similar decontamination effect on fresh produce, demonstrating that the UV system could be used to replace the pulsed light system to reduce equipment cost.

Reduction of microbial load in yellow alkaline noodle using optimized microwave and pulsed-UV treatment to improve storage stability

Pulsed-UV is an emerging innovation in non-thermal processing and is scarcely explored. This study introduces a combined treatment of microwave and pulsed-UV to reduce the microbial load in yellow alkaline noodle (YAN), a popular staple food among South East Asians that is easily perishable, without jeopardising its textural qualities. Results indicated that the combination of 5 s microwave (power = 900 W; frequency = 2450 MHz) and 3.5 J/cm2 pulsed-UV significantly reduced aerobic plate count and spore forming bacteria, from 637.5 to 50 CFU/g and 1500 to 100 CFU/g, respectively. In terms of textural properties, even though significant changes were detected in hardness and springiness for treated YAN kept at ambient storage as compared to control, the alterations were not prominent. Based on these observations, it is concluded that a combined treatment of microwave and pulsed-UV successfully improved the shelf life of YAN at ambient storage by 50%, from 1.0 day (control) to 1.5 days (treated sample) and by 140%, from 2.0 to 4.8 weeks at chilled storage. Current study proves the potential of microwave + pulsed-UV, a "green" hurdle treatment, to extend the shelf life of preservative-free YAN without causing major undesirable textural alterations on the noodle.

Efficacy of blue LED in microbial inactivation: Effect of photosensitization and process parameters

Efficacy of blue (462 ± 3 nm) Light emitting diode (LED) illumination to inactivate the foodborne pathogens like Escherichia coli and Staphylococcus aureus in the presence of exogenous photosensitizer (curcumin) was studied in vitro. The effect of temperature, concentration of photosensitizer and incubation time with photosensitizer for microbial inactivation was investigated and sublethal injury of cells was determined. Mechanism of inactivation by the combination of photosensitizer and blue light was also examined. A maximum reduction of 5.94 ± 0.22 and 5.91 ± 0.20 log CFU/ml was obtained for E. coli and S. aureus, respectively, when treated with photosensitizer (20 μM) at 13 J/cm² of blue light. There was no significant change in the inactivation of these pathogens both at 9 °C and 27 °C in the presence of photosensitizer. Even, the incubation with the photosensitizer didn't show any significant difference on the inactivation of these food-borne pathogens. Sublethal injury (>90% injury) was also observed for the cells treated with photosensitizer and blue light simultaneously. Confocal laser scanning microscopy analysis revealed that membrane integrity was disturbed due to photodynamic activity of curcumin in both the bacteria. Further, both cells produced intracellular reactive oxygen species by the action of photosensitizer and blue light. Scanning electron microscopy of E. coli and S. aureus cells treated with photosensitizer and blue light showed morphological changes in the cell wall compared to untreated group. The study indicated that photodynamic inactivation of foodborne pathogens using LED-based photosensitization can be explored as a potential technique for food safety.