Autorepressor properties of the pi-initiation protein encoded by plasmid R6K

Cell cycle-coordinated maintenance of the Vibrio bipartite genome

To preserve the integrity of their genome, bacteria rely on several genome maintenance mechanisms that are co-ordinated with the cell cycle. All members of the Vibrio family have a bipartite genome consisting of a primary chromosome (Chr1) homologous to the single chromosome of other bacteria such as Escherichia coli and a secondary chromosome (Chr2) acquired by a common ancestor as a plasmid. In this review, we present our current understanding of genome maintenance in Vibrio cholerae, which is the best-studied model for bacteria with multi-partite genomes. After a brief overview on the diversity of Vibrio genomic architecture, we describe the specific, common, and co-ordinated mechanisms that control the replication and segregation of the two chromosomes of V. cholerae. Particular attention is given to the unique checkpoint mechanism that synchronizes Chr1 and Chr2 replication.

Rep protein accommodates together dsDNA and ssDNA which enables a loop-back mechanism to plasmid DNA replication initiation

For DNA replication initiation in Bacteria, replication initiation proteins bind to double-stranded DNA (dsDNA) and interact with single-stranded DNA (ssDNA) at the replication origin. The structural-functional relationship of the nucleoprotein complex involving initiator proteins is still elusive and different models are proposed. In this work, based on crosslinking combined with mass spectrometry (MS), the analysis of mutant proteins and crystal structures, we defined amino acid residues essential for the interaction between plasmid Rep proteins, TrfA and RepE, and ssDNA. This interaction and Rep binding to dsDNA could not be provided in trans, and both are important for dsDNA melting at DNA unwinding element (DUE). We solved two crystal structures of RepE: one in a complex with ssDNA DUE, and another with both ssDNA DUE and dsDNA containing RepE-specific binding sites (iterons). The amino acid residues involved in interaction with ssDNA are located in the WH1 domain in stand β1, helices α1 and α2 and in the WH2 domain in loops preceding strands β1' and β2' and in these strands. It is on the opposite side compared to RepE dsDNA-recognition interface. Our data provide evidence for a loop-back mechanism through which the plasmid replication initiator molecule accommodates together dsDNA and ssDNA.

Replisome Assembly at Bacterial Chromosomes and Iteron Plasmids

The proper initiation and occurrence of DNA synthesis depends on the formation and rearrangements of nucleoprotein complexes within the origin of DNA replication. In this review article, we present the current knowledge on the molecular mechanism of replication complex assembly at the origin of bacterial chromosome and plasmid replicon containing direct repeats (iterons) within the origin sequence. We describe recent findings on chromosomal and plasmid replication initiators, DnaA and Rep proteins, respectively, and their sequence-specific interactions with double- and single-stranded DNA. Also, we discuss the current understanding of the activities of DnaA and Rep proteins required for replisome assembly that is fundamental to the duplication and stability of genetic information in bacterial cells.

Iteron Plasmids

Iteron-containing plasmids are model systems for studying the metabolism of extrachromosomal genetic elements in bacterial cells. Here we describe the current knowledge and understanding of the structure of iteron-containing replicons, the structure of the iteron plasmid encoded replication initiation proteins, and the molecular mechanisms for iteron plasmid DNA replication initiation. We also discuss the current understanding of control mechanisms affecting the plasmid copy number and how host chaperone proteins and proteases can affect plasmid maintenance in bacterial cells.

Host range diversification within the IncP-1 plasmid group

Broad-host-range plasmids play a critical role in the spread of antibiotic resistance and other traits. In spite of increasing information about the genomic diversity of closely related plasmids, the relationship between sequence divergence and host range remains unclear. IncP-1 plasmids are currently classified into six subgroups based on the genetic distance of backbone genes. We investigated whether plasmids from two subgroups exhibit a different host range, using two IncP-1γ plasmids, an IncP-1β plasmid and their minireplicons. Efficiencies of plasmid establishment and maintenance were compared using five species that belong to the Alphaproteobacteria, Betaproteobacteria and Gammaproteobacteria. The IncP-1β plasmid replicated and persisted in all five hosts in the absence of selection. Of the two IncP-1γ plasmids, both were unable to replicate in alphaproteobacterial host Sphingobium japonicum, and one established itself in Agrobacterium tumefaciens but was very unstable. In contrast, both IncP-1γ minireplicons, which produced higher levels of replication initiation protein than the wild-type plasmids, replicated in all strains, suggesting that poor establishment of the native plasmids is in part due to suboptimal replication initiation gene regulation. The findings suggest that host ranges of distinct IncP-1 plasmids only partially overlap, which may limit plasmid recombination and thus result in further genome divergence.

Plasmid R6K replication control

The focus of this minireview is the replication control of the 39.9-kb plasmid R6K and its derivatives. Historically, this plasmid was thought to have a narrow host range but more recent findings indicate that its derivatives can replicate in a variety of enteric and non-enteric bacterial species (Wild et al., 2004). In the four-plus decades since it was first described, R6K has proven to be an excellent model for studies of plasmid DNA replication. In part this is because of its similarities to other systems in which replication is activated and regulated by Rep protein and iteron-containing DNA. However its apparent idiosynchracies have also added to its significance (e.g., independent and co-dependent replication origins, and Rep dimers that stably bind iterons). Here, we survey the current state of knowledge regarding R6K replication and place individual regulatory elements into a proposed homeostatic model with implications for the biological significance of R6K and its multiple origins of replication.

A comprehensive toolbox for the rapid construction of lacZ fusion reporters

β-Galactosidase encoded by lacZ remains a popular reporter enzyme. Here, we present three fast and convenient tools that facilitate rapid construction of reporter lacZ fusions. The first enables the simple generation of lacZ (slacZ)-based chromosomally encoded reporter fusions within the lac operon in Escherichia coli using Red®/ET® recombination. The slacZ tool is based on rpsL counter-selection in combination with homologous recombination catalyzed by the λ Red recombinase, and blue/white screening. This permits construction of transcriptional and translational reporter lacZ fusions within a day. The second tool allows the introduction of lacZ reporter fusions into the chromosome by a single-crossover method. The strategy relies on the γ-origin-based suicide vector pNPTS138-R6KT, which can only replicate in λpir E. coli strains. The third tool comprises four pBBR1-based broad-host-range vectors for transcriptional and translational lacZ fusions. The functionality of our toolbox was confirmed by the K(+)-dependent activation of kdp promoter-lacZ fusions in vivo.

Molecular cloning and identification of the laspartomycin biosynthetic gene cluster from Streptomyces viridochromogenes

The biosynthetic gene cluster for laspartomycins, a family of 11 amino acid peptide antibiotics, has been cloned and sequenced from Streptomyces viridochromogenes ATCC 29814. Annotation of a segment of 88912bp of S. viridochromogenes genomic sequence revealed the putative lpm cluster and its flanking regions which harbor 43 open reading frames. The lpm cluster, which spans approximately 60 kb, consists of 21 open reading frames. Those include four NRPS genes (lpmA/orf18, lpmB/orf25, lpmC/orf26 and lpmD/orf27), four genes (orfs 21, 22, 24 and 29) involved in the lipid tail biosynthesis and attachment, four regulatory genes (orfs 13, 19, 32 and 33) and three putative exporters or self-resistance genes (orfs 14, 20 and 30). In addition, the gene involved in the biosynthesis of the nonproteinogenic amino acid Pip was also identified in the lpm cluster while the genes necessary for the biosynthesis of the rare residue diaminopropionic acid (Dap) were found to reside elsewhere on the chromosome. Interestingly, the dabA, dabB and dabC genes predicted to code for the biosynthesis of the unusual amino acid diaminobutyric acid (Dab) are organized into the lpm cluster even though the Dab residue was not found in the laspartomycins. Disruption of the NRPS lpmC gene completely abolished laspartomycin production in the corresponding mutant strain. These findings will allow molecular engineering and combinatorial biosynthesis approaches to expand the structural diversity of the amphomycin-group peptide antibiotics including the laspartomycins and friulimicins.

Investigations of pi initiator protein-mediated interaction between replication origins alpha and gamma of the plasmid R6K

A typical plasmid replicon of Escherichia coli, such as ori gamma of R6K, contains tandem iterons (iterated initiator protein binding sites), an AT-rich region that melts upon initiator-iteron interaction, two binding sites for the bacterial initiator protein DnaA, and a binding site for the DNA-bending protein IHF. R6K also contains two structurally atypical origins called alpha and beta that are located on either side of gamma and contain a single and a half-iteron, respectively. Individually, these sites do not bind to initiator protein pi but access it by DNA looping-mediated interaction with the seven pi-bound gamma iterons. The pi protein exists in 2 interconvertible forms: inert dimers and active monomers. Initiator dimers generally function as negative regulators of replication by promoting iteron pairing ("handcuffing") between pairs of replicons that turn off both origins. Contrary to this existing paradigm, here we show that both the dimeric and the monomeric pi are necessary for ori alpha-driven plasmid maintenance. Furthermore, efficient looping interaction between alpha and gamma or between 2 gamma iterons in vitro also required both forms of pi. Why does alpha-gamma iteron pairing promote alpha activation rather than repression? We show that a weak, transitory alpha-gamma interaction at the iteron pairs was essential for alpha-driven plasmid maintenance. Swapping the alpha iteron with one of gamma without changing the original sequence context that caused enhanced looping in vitro caused a significant inhibition of alpha-mediated plasmid maintenance. Therefore, the affinity of alpha iteron for pi-bound gamma and not the sequence context determined whether the origin was activated or repressed.

Structure-based functional analysis of the replication protein of plasmid R6K: key amino acids at the pi/DNA interface

In previous work, we characterized the bases in an iteron of plasmid R6K that are important for the binding of pi protein monomers and dimers. Here we investigate the following six amino acids of pi, encoded by pir, hypothesized to be important for DNA contact: Ser71, Try74, Gly131, Gly211, Arg225, and Arg254.

The ColE2-P9 Rep protein binds to the origin DNA as a monomer

The Rep proteins of some plasmid replicons have two functions. Dimers bind to the operator sequences acting as auto-repressors, whereas monomers bind to the iterons to initiate replication of DNA. The ColE2 Rep proteins are present mostly in a dimeric form with some multimers larger than dimers in solution, while the form of Rep binding to Ori is not known. We used an EMSA-based method to determine the molecular weight of Rep in the Rep-Ori complex. The result suggested that Rep binds to Ori as a monomer. In addition, the result of EMSA using the Rep protein fused with the maltose binding protein and the His6-tag also supported this conclusion. We proposed that dimerization of Rep might probably be involved in keeping the copy number of the ColE2 plasmid at the normal low level by limiting the amount of active monomeric forms of Rep in the host cell.

Characterization of a large, stable, high-copy-number Streptomyces plasmid that requires stability and transfer functions for heterologous polyketide overproduction

A major limitation to improving small-molecule pharmaceutical production in streptomycetes is the inability of high-copy-number plasmids to tolerate large biosynthetic gene cluster inserts. A recent finding has overcome this barrier. In 2003, Hu et al. discovered a stable, high-copy-number, 81-kb plasmid that significantly elevated production of the polyketide precursor to the antibiotic erythromycin in a heterologous Streptomyces host (J. Ind. Microbiol. Biotechnol. 30:516-522, 2003). Here, we have identified mechanisms by which this SCP2*-derived plasmid achieves increased levels of metabolite production and examined how the 45-bp deletion mutation in the plasmid replication origin increased plasmid copy number. A plasmid intramycelial transfer gene, spd, and a partition gene, parAB, enhance metabolite production by increasing the stable inheritance of large plasmids containing biosynthetic genes. Additionally, high product titers required both activator (actII-ORF4) and biosynthetic genes (eryA) at high copy numbers. DNA gel shift experiments revealed that the 45-bp deletion abolished replication protein (RepI) binding to a plasmid site which, in part, supports an iteron model for plasmid replication and copy number control. Using the new information, we constructed a large high-copy-number plasmid capable of overproducing the polyketide 6-deoxyerythronolide B. However, this plasmid was unstable over multiple culture generations, suggesting that other SCP2* genes may be required for long-term, stable plasmid inheritance.

The DnaK-DnaJ-GrpE chaperone system activates inert wild type pi initiator protein of R6K into a form active in replication initiation

The plasmid R6K is an interesting model system for investigating initiation of DNA replication, not only near the primary binding sites of the initiator protein pi but also at a distance, caused by pi -mediated DNA looping. An important milestone in the mechanistic analysis of this replicon was the development of a reconstituted replication system consisting of 22 different highly purified proteins (Abhyankar, M. A., Zzaman, S., and Bastia, D. (2003) J. Biol. Chem. 278, 45476-45484). Although the in vitro reconstituted system promotes ori gamma-specific initiation of replication by a mutant form of the initiator called pi*, the wild type (WT) pi is functionally inert in this system. Here we show that the chaperone DnaK along with its co-chaperone DnaJ and the nucleotide exchange factor GrpE were needed to activate WT pi and caused it to initiate replication in vitro at the correct origin. We show further that the reaction was relatively chaperone-specific and that other chaperones, such as ClpB and ClpX, were incapable of activating WT pi. The molecular mechanism of activation appeared to be a chaperone-catalyzed facilitation of dimeric inert WT pi into iteron-bound monomers. Protein-protein interaction analysis by enzyme-linked immunosorbent assay revealed that, in the absence of ATP, DnaJ directly interacted with pi but its binary interactions with DnaK and GrpE and with ClpB and ClpX were at background levels, suggesting that pi is recruited by protein-protein interaction with DnaJ and then fed into the DnaK chaperone machine to promote initiator activation.

Binding modes of the initiator and inhibitor forms of the replication protein pi to the gamma ori iteron of plasmid R6K

Discerning the interactions between initiator protein and the origin of replication should provide insights into the mechanism of DNA replication initiation. In the gamma origin of plasmid R6K, the Rep protein, pi, is distinctive in that it can bind the seven 22-bp iterons in two forms; pi monomers activate replication, whereas pi dimers act as inhibitors. In this work, we used wild type and variants of the pi protein with altered monomer/dimer ratios to study iteron/pi interactions. High resolution contact mapping was conducted using multiple techniques (missing base contact probing, methylation protection, base modification, and hydroxyl radical footprinting), and the electrophoretic separation of nucleoprotein complexes allowed us to discriminate between contact patterns produced by pi monomers and dimers. We also isolated iteron mutants that affected the binding of pi monomers (only) or both monomers and dimers. The mutational studies and footprinting analyses revealed that, when binding DNA, pi monomers interact with nucleotides spanning the entire length of the iteron. In contrast, pi dimers interact with only the left half of the iteron; however, the retained interactions are strikingly similar to those seen with monomers. These results support a model in which Rep protein dimerization disturbs one of two DNA binding domains important for monomer/iteron interaction; the dimer/iteron interaction utilizes only one DNA binding domain.

Isomerization and apparent DNA bending by π, the replication protein of plasmid R6K

Plasmid R6K-encoded pi protein has multiple regulatory functions in replication and transcription. These functions rely, in part, on a complex set of interactions between monomers and dimers of the protein and distinct DNA targets, the direct and inverted repeats (DRs, IRs). In the work described here, we examine the isomerization and DNA bending properties of pi using electrophoretic mobility shift assays and circular permutation assays. Our data suggest that pi dimers can bend IRs, and dimer subunits seem to readily associate in head-to-head and head-to-tail fashion. The ability of pi to bend DRs is also reexamined using techniques that allow us to discriminate between bending induced by its different isomeric forms. We find that both monomers and dimers bend a single DR to similar degrees while results with 2DRs are more complex. The significance of the bending data in regard to a possible mechanism for replication initiation by pi protein is discussed.

Biochemical investigations of control of replication initiation of plasmid R6K

The mechanistic basis of control of replication initiation of plasmid R6K was investigated by addressing the following questions. What are the biochemical attributes of mutations in the pi initiator protein that caused loss of negative control of initiation? Did the primary control involve only initiator protein-ori DNA interaction or did it also involve protein-protein interactions between pi and several host-encoded proteins? Mutations at two different regions of the pi-encoding sequence individually caused some loss of negative control as indicated by a relatively modest increase in copy number. However, combinations of the mutation P42L, which caused loss of DNA looping, with those located in the region between the residues 106 and 113 induced a robust enhancement of copy number. These mutant forms promoted higher levels of replication in vitro in a reconstituted system consisting of 22 purified proteins. The mutant forms of pi were susceptible to pronounced iteron-induced monomerization in comparison with the WT protein. As contrasted with the changes in DNA-protein interaction, we found no detectable differences in protein-protein interaction between wild type pi with DnaA, DnaB helicase, and DnaG primase on one hand and between the high copy mutant forms and the same host proteins on the other. The DnaG-pi interaction reported here is novel. Taken together, the results suggest that both loss of negative control due to iteron-induced monomerization of the initiator and enhanced iteron-initiator interaction appear to be the principal causes of enhanced copy number.

Reconstitution of R6K DNA replication in vitro using 22 purified proteins

We have reconstituted a multiprotein system consisting of 22 purified proteins that catalyzed the initiation of replication specifically at ori gamma of R6K, elongation of the forks, and their termination at specific replication terminators. The initiation was strictly dependent on the plasmid-encoded initiator protein pi and on the host-encoded initiator DnaA. The wild type pi was almost inert, whereas a mutant form containing 3 amino acid substitutions that tended to monomerize the protein was effective in initiating replication. The replication in vitro was primed by DnaG primase, whereas in a crude extract system that had not been fractionated, it was dependent on RNA polymerase. The DNA-bending protein IHF was needed for optimal replication and its substitution by HU, unlike in the oriC system, was less effective in promoting optimal replication. In contrast, wild type pi-mediated replication in vivo requires IHF. Using a template that contained ori gamma flanked by two asymmetrically placed Ter sites in the blocking orientation, replication proceeded in the Cairns type mode and generated the expected types of termination products. A majority of the molecules progressed counterclockwise from the ori, in the same direction that has been observed in vivo. Many features of replication in the reconstituted system appeared to mimic those of in vivo replication. The system developed here is an important milestone in continuing biochemical analysis of this interesting replicon.

Characterization of His-tagged, R6K-encoded pi protein variants

The pi protein of plasmid R6K is a multifunctional replication (Rep) protein, its different activities attributable, in part, to different oligomeric states: monomers and dimers. We have previously shown that His-tagged variants of the protein can exhibit alterations in dimer stability. Herein, we examined the functional properties of selected His-tagged derivatives of pi (His-pi x wt and three hyperactive replication variants) to determine if the functionality of these proteins in replication, DNA binding, and oligomerization is altered. Our results indicate that these tagged proteins retain the characteristics previously demonstrated for their non-tagged counterparts making them suitable for ongoing studies of pi protein structure and functions in replication and transcription.

Dimers of pi protein bind the A+T-rich region of the R6K gamma origin near the leading-strand synthesis start sites: regulatory implications

The replication of gamma origin, a minimal replicon derived from plasmid R6K, is controlled by the Rep protein pi. At low intracellular concentrations, pi activates the gamma origin, while it inhibits replication at elevated concentrations. Additionally, pi acts as a transcription factor (auto)repressing its own synthesis. These varied regulatory functions depend on pi binding to reiterated DNA sequences bearing a TGAGNG motif. However, pi also binds to a "non-iteron" site (i.e., not TGAGNG) that resides in the A+T-rich region adjacent to the iterons. This positioning places the non-iteron site near the start sites for leading-strand synthesis that also occur in the A+T-rich region of gamma origin. We have hypothesized that origin activation (at low pi levels) would require the binding of pi monomers to iterons, while the binding of pi dimers to the non-iteron site (at high pi levels) would be required to inhibit priming. Although monomers as well as dimers can bind to an iteron, we demonstrate that only dimers bind to the non-iteron site. Two additional pieces of data support the hypothesis of negative replication control by pi binding to the non-iteron site. First, pi binds to the non-iteron site about eight times less well than it binds to a single iteron. Second, hyperactive variants of pi protein (called copy-up) either do not bind to the non-iteron site or bind to it less well than wild-type pi. We propose a replication control mechanism whereby pi would directly inhibit primer formation.

Regulatory implications of protein assemblies at the gamma origin of plasmid R6K - a review

Recognition of the replication origin (ori) by initiator protein is a recurring theme for the regulated initiation of DNA replication in diverse biological systems. The objective of the work reviewed here is to understand the initiation process focusing specifically on the gamma-ori of the antibiotic-resistance plasmid R6K. The control of gamma-ori copy number is determined by both plasmid-encoded and host-encoded factors. The two central regulatory elements of the plasmid are a multifunctional initiator protein pi, and sequence-related DNA target sites, the inverted half-repeats (IRs) and the direct repeats (DRs). The replication activator and inhibitor activities of pi seem to be at least partially distributed between two naturally occurring pi polypeptides (designated by their molecular weights pi35.0 and pi30.5). Regulatory variants of pi with altered states of oligomerization in nucleoprotein complexes with DRs and IRs have been isolated. The properties of these mutants laid the foundation for our model of pi protein activity which proposes that different protein surfaces are required for the formation of functionally distinct complexes of pi with DRs and IRs. These mutants also suggest that pi polypeptides have a modular structure; the C-terminus contains the DNA-binding domain while the N-terminus controls protein oligomerization. Additionally, pi35.0 binds to a novel DNA sequence in the A+T-rich segment of gamma-ori. This binding site is at or near the site from which synthesis of the leading strand begins.

Assemblies of replication initiator protein on symmetric and asymmetric DNA sequences depend on multiple protein oligomerization surfaces

The pi35.0 protein of plasmid R6K regulates transcription and replication by binding a DNA sequence motif (TGAGR) arranged either asymmetrically into 22 bp direct repeats (DRs) in the gamma origin, or symmetrically into inverted half-repeats (IRs) in the operator of its own gene, pir. The binding patterns of the two natural forms of the pi protein and their heterodimers revealed that the predominant species, pi35.0 (35.0 kDa), can bind to a single copy of the DR as either a monomer or a dimer while pi30.5 (30.5 kDa) binds only as a dimer. We demonstrate that only one subunit of a pi35.0 dimer makes specific contact with DNA. Electron microscopic (EM) analysis of the nucleoprotein complexes formed by pi35.0 and DNA fragments containing all seven DRs revealed coupled ("hand-cuffed") DNA molecules that are aligned in a parallel orientation. Antiparallel orientations of the DNA were not observed. Thus, hand-cuffing depends on a highly ordered oligomerization of pi35.0 in such structures. The pi protein (pi35.0, pi30.5) binds to an IR as a dimer or heterodimer but not as a monomer. Moreover, a single amino acid residue substitution, F200S (pir200), introduced into pi30.5 severely destabilizes dimers of this protein in solution and concomitantly prevents binding of this protein to the IR. This mutation also changes the stability of pi35.0 dimers but it does not change the ability of pi35.0 to bind IRs. To explain these observations we propose that the diverse interactions of pi variants with DNA are controlled by multiple surfaces for protein oligomerization.

Replication of R6K gamma origin in vitro: discrete start sites for DNA synthesis dependent on pi and its copy-up variants

The regulation of the plasmid R6K gamma origin (gamma ori) is accomplished through the ability of the pi protein to act as an initiator and inhibitor of replication. Hyperactive variants of this protein, called copy-up pi, allow four to tenfold increases of gamma ori plasmid DNA in vivo. The higher activity of copy-up pi variants could be explained by an increase in the initiator function, a decrease in the inhibitor activity, or a derepression of a more efficient mechanism of replication that can be used by wt pi (pi35. 0) only under certain conditions. We have compared the replication activities of wt pi35.0 and copy-up pi mutants in vitro, and analyzed the replication products. It is shown that copy-up variants are several-fold more active than wt pi35.0 in replication. This appears to be due to enhanced specific replication activity of copy-up mutants rather than elevated fractions of protein proficient in DNA binding. Furthermore, biochemical complementation revealed that pi200 (copy-up) is dominant over wt pi35.0. The elevated activity of copy-up pi is not caused by an increased rate of replisome assembly as inferred from in vitro replication assays in which the lag periods observed were similar to that of wt pi35.0. Moreover, only one round of semiconservative, unidirectional replication occurred in all the samples analyzed indicating that copy-up pi proteins do not initiate multiple rounds of DNA synthesis. Rather, a larger fraction of DNA template replicates in the presence of copy-up pi as determined by electron microscopy. Two clusters of discrete DNA synthesis start sites are mapped by primer extension near the stability (stb) locus of the gamma ori. We show that the start sites are the same in the presence of wt pi35.0 or copy-up proteins. This comparative analysis suggests that wt pi35.0 and copy-up variants utilize fundamentally similar mechanism(s) of replication priming.

Protein domains and conformational changes in the activation of RepA, a DNA replication initiator

RepA is the DNA replication initiator protein of the Pseudomonas plasmid pPS10. RepA has a dual function: as a dimer, it binds to an inversely-repeated sequence acting as a repressor of its own synthesis; as a monomer, RepA binds to four directly-repeated sequences to constitute a specialized nucleoprotein complex responsible for the initiation of DNA replication. We have previously shown that a Leucine Zipper-like motif (LZ) at the N-terminus of RepA is responsible for protein dimerization. In this paper we characterize the existence in RepA of two protein globular domains C-terminal to the LZ. We propose that dissociation of RepA dimers into monomers results in a conformational change from a compact arrangement of both domains, competent for binding to the operator, to an extended species that is suited for iteron binding. This model establishes the structural basis for the activation of DNA replication initiators in plasmids from Gram-negative bacteria.

Two forms of replication initiator protein: positive and negative controls

The pir gene of plasmid R6K encodes the protein, pi, a replication and transcription factor. Two translational options for the pir gene give rise to two forms of pi protein: a 35.0-kDa form (pi35.0) and a shortened 30.5-kDa form (pi30.5). Although both proteins bind to a series of 22-bp direct repeats essential for plasmid R6K replication, only pi35.0 can bind to a site in the (A.T)-rich segment of its gamma ori and activate the gamma ori in vivo and in vitro. However, unlike pi35.0, pi30.5can inhibit in vivo and in vitro replication (activated by pi35.0). We propose that the two forms of pi might have distinct functions in replication. We show that although both forms of pi produce dimers, the nature of these dimers is not identical. The N-terminal 37 amino acid residues appear to control the formation of the more stable pi35.0 dimers, whereas another, apparently weaker interface holds together dimers of pi30.5. We speculate that the leucine zipper-like motif, absent in pi30.5, controls very specific functions of pi protein.

Initiator protein pi can bind independently to two domains of the gamma origin core of plasmid R6K: the direct repeats and the A+T-rich segment

The pi protein of plasmid R6K functions in both replication and transcription. pi autoregulates its own synthesis and is required for replication of the RISK gamma origin. pi performs these functions by binding to specific DNA sites arranged as pairs of 6-10 bp inverted repeats (IRs) or as a cluster of seven tandem 22 bp direct repeats (DRs) which lack symmetry. The sites share the TGAGRG nucleotide motif (where R is A or G). The DRs and IRs flank the central A+T-rich segment of the gamma origin. In this work we carried out DNase I and hydroxyl radical protection experiments on various deletion derivatives of the gamma origin complexed with pi protein. These experiments revealed binding of pi to a novel site embedded within the A+T-rich segment. This interaction manifests primarily by the appearance of the enhanced scissions of DNA by DNase I and hydroxyl radicals. pi interaction with the A+T-rich site is independent of pi binding to the DRs and IRs. We propose that pi protein can recognize distinct families of DNA sequences in the gamma origin.

Altered (copy-up) forms of initiator protein pi suppress the point mutations inactivating the gamma origin of plasmid R6K

The R6K gamma origin core contains the P2 promoter, whose -10 and -35 hexamers overlap two of the seven binding sites for the R6K-encoded pi protein. Two mutations, P2-201 and P2-203, which lie within the -35 region of P2, are shown to confer a promoter-down phenotype. We demonstrate here that these mutations prevent replication of a gamma origin core plasmid. To determine whether or not the reduced promoter activity caused by these mutations is responsible for their effect on replication, we generated two new mutations (P2-245-6-7 and P2-246) in the -10 hexamer of the P2 promoter. Although these new mutations inhibit P2 activity as much as the P2-201 and P2-203 mutations, they do not prevent replication of the gamma origin core. Therefore, activity of the P2 promoter does not appear to be required for replication. We also show that the inability of the gamma origin to function in the presence of the P2-201 and P2-203 mutations is reversed by the hyperactive variants of pi protein called copy-up pi. This suppression occurs despite the fact that in vivo dimethyl sulfate methylation protection patterns of the gamma origin iterons are identical in cells producing wild-type pi and those producing copy-up pi variants. We discuss how the P2-201 and P2-203 mutations could inhibit replication of the gamma origin core and what mechanisms might allow the copy-up pi mutants to suppress this deficiency.

A DNA segment conferring stable maintenance on R6K gamma-origin core replicons

The plasmid R6K gamma origin consists of two adjacent modules, the enhancer and the core, and requires R6K initiator protein pi for replication. While the core alone can replicate at a low level of wild-type pi protein, we show here that host cells do not stably maintain core plasmids. The presence of the enhancer segment confers stable inheritance on core plasmids without a significant change in average plasmid copy number. Deletions and site-directed mutagenesis indicated that the stability of core plasmids is not mediated by binding sites or consensus sequences in the enhancer for DnaA, pi protein, gyrase, Fis, or Dcm methylase. Proper segregation of core plasmids requires only the R6K stb or stability-related region, which includes the 20-bp segment of the 100-bp enhancer adjacent to the core. The use of the pi 116 mutant protein, which increases plasmid copy number fourfold, does not stabilize core plasmids lacking the enhancer. We also show that at an elevated level of wild-type pi, the gamma-origin plasmid is unstable, even in the presence of the enhancer. We discuss the differences and similarities between the R6K stability system and those found in other plasmids.

Buffer composition mediates a switch between cooperative and independent binding of an initiator protein to DNA

The regulation of many biological processes, including DNA replication, is frequently achieved by protein-protein interactions, as well as protein-DNA interactions. Multiple protein-binding sites are often involved. For example, the replication of plasmid R6K involves binding of the initiator protein pi to seven 22-bp direct repeats (DR) in the gamma origin of replication (gamma ori). A mutant protein pi S87N has been isolated, that in Tris.borate buffer (TB) binds cooperatively to seven DR, whereas wild-type (wt) pi binds independently [Filutowicz et al., Nucleic Acids Res. 22 (1994) 4211-4215]. Surprisingly, we found that wt pi can also bind cooperatively when Tris.acetate (TA), Tris.succinate or Tris.glutamate buffers are used instead of TB. The cooperative binding of the wt pi protein was also observed in the TB buffer at high concentrations of Na2EDTA. These results suggest that pi may be able to assume two functionally distinct conformations as a result of either mutation or buffer composition. Moreover, we found that the mode of pi binding is determined not by the composition of the buffer in which the reaction was assembled, but by the composition of the electrophoresis buffer. We discuss the general implications of these findings.

Cooperative binding of initiator protein to replication origin conferred by single amino acid substitution

The replication initiator protein pi of plasmid R6K binds seven 22 bp direct repeats (DR) in the gamma origin. The pi protein also binds to an inverted repeat (IR) in the operator of its own gene, pir, which lies outside the gamma origin sequences. A genetic system was devised to select for pi protein mutants which discriminate between IR and DR (York et al., Gene (Amst.) 116, 7-12, 1992; York and Filutowicz, J. Biol. Chem. 268, 21854-21861, 1993). From this selection the mutant pi S87N protein was isolated which is deficient in repressing the pir gene's expression because it cannot bind to IR at the pir gene operator. Remarkably, we discovered that pi S87N binds to DR cooperatively under conditions where wt pi binds independently. Moreover, the pi S87N is more active as a replication initiator in vivo when supplied at the same level as wt pi. Quantitative binding assays showed that both wt pi and pi S87N bind a DNA fragment containing a single DR unit with a similar affinity (Kd = 0.3 x 10(-12) M). Thus, cooperativity of pi S87N is most likely achieved through altered interactions between promoters bound at adjacent DR units.

The dimerization domain of R6K plasmid replication initiator protein pi revealed by analysis of a truncated protein

Replication of plasmid R6K is controlled by the homodimeric initiator protein pi, which binds to seven 22-bp direct repeats (iterons) in the gamma-origin. One of the genetically engineered pi variants (delta C164 pi) contains only the 164 N-terminal amino acids (aa) of the 305-aa pi molecule. This truncated pi polypeptide retains the ability to function as a specific inhibitor of R6K replication in vivo, though it neither drives replication, nor binds to iterons [Greener et al., Mol. Gen. Genet. 224 (1990) 24-32]. In order to define the region of pi responsible for dimerization, we have performed chemical crosslinking experiments with purified delta C164 pi and shown that this polypeptide is dimeric. We did not observe an exchange between protein monomers upon mixing of wild-type pi and delta C164 pi homodimers. However, heterodimers, as well as each type of homodimers, were formed when these polypeptides refolded after guanidine hydrochloride treatment. Thus, both dimerization and dimer stability are determined by the N-terminal domain of pi. We speculate that these properties might depend on the leucine zipper and RGD motifs that have been identified in the two regions of the N-terminal domain of pi.

Multiple pathways of copy control of gamma replicon of R6K: mechanisms both dependent on and independent of cooperativity of interaction of tau protein with DNA affect the copy number

The ability of a replication initiator protein to promote intermolecular pairing of two replication origins resulting in the turning off of the origin pair has been called handcuffing. We have endeavored to test the validity of the handcuffing model by isolating two mutant forms of the tau initiator protein of R6K that elicit high copy number phenotype. We have discovered that one mutant called tau 113 yielded a 3.6-fold increase in copy number of a gamma replicon with a concomitant impairment of its ability to loop DNA and to pair binding sites (iterons) in comparison with normal tau, thus supporting the handcuffing model. A second mutant called tau 108, on the other hand, elicited a 3-fold increase in copy number without showing any measurable loss in its ability to loop and pair gamma iterons. Both mutant forms of the wild-type tau protein showed no detectable differences in their affinity of binding to the gamma iterons. Thus, the phenotype of tau 108 is consistent with the proposition that copy number control involves macromolecular interactions other than cooperativity at a distance of tau or interaction of tau with the primary binding sites at gamma. Taken together, the results are consistent with the notion that tau-mediated handcuffing is a mechanism, but not the only mechanism, of copy control in R6K. Interaction of tau with host proteins is likely to provide additional facets of the copy control mechanism.

Minimal essential origin of plasmid pSC101 replication: requirement of a region downstream of iterons

The minimal replication origin (ori) of the plasmid pSC101 was defined as an about 220-bp region under the condition that the Rep (or RepA) protein, a plasmid-encoded initiator protein, was supplied in trans. The DnaA box is located at one end of ori, as in other plasmids, like mini-F and P1. The other border is a strong binding site (IR-1) of Rep which is palindromic sequence and lies in an about 50-bp region beyond the repeated sequences (iterons) in ori. This IR-1 is located just upstream of another strong Rep binding site (IR-2), the operator site of the structure gene of Rep (rep), but its function has not been determined. The present study shows that the IR-1 sequence capable of binding to Rep is essential for plasmid replication with a nearly normal copy number. Furthermore, a region between the third iteron and IR-1 is also required in a sequence-specific fashion, since some one-base substitution in this region inactivate the origin function. It is likely that the region also is a recognition site of an unknown protein. Three copy number mutations of rep can suppress any one-base substitution mutation. On the other hand, the sequence of a spacer region between the second and the third iterons, which is similar to that of the downstream region of the third iteron, can be changed without loss of the origin function. The requirement of the region downstream of iterons in pSC101 seems to be unique among iteron-driven plasmid replicons.

Identification of a novel promoter in the replication control region of plasmid R6K

A novel source of transcription has been detected in the replication region of plasmid R6K by using fusions involving the galK reporter gene. The -35 and -10 consensus RNA polymerase binding sites were identified in the region overlapping the binding sites for the R6K-encoded replication protein pi. Transcription from this promoter, designated P2, is repressed in vivo by pi-protein levels that are inhibitory for replication. Promoter-down mutations in P2 induced in vitro by bisulfite mutagenesis result in a reduced copy number of a beta-replicon but not of a gamma-replicon. Implications of the role of P2 in R6K replication are discussed.

Translational options for the pir gene of plasmid R6K: multiple forms of the replication initiator protein pi

The autogenously controlled pir gene of plasmid R6K was believed to encode a single polypeptide that plays multiple roles in the plasmid's biology. We have isolated an opal (op) mutant at the 18th codon of the pir coding frame which does not totally abolish translation of pir mRNA. In extracts of cells containing this mutation two translational products (35 kDa and 30.2 kDa) have been detected. We propose that the 35-kDa polypeptide produced by the pir18 op mutation contains Trp substituted for Arg18 as the result of an opal readthrough. Translation, which results in the 30.2-kDa polypeptide, originates downstream from the UGA stop signal created by the mutation. Moreover, we realize now that the 30.2-kDa polypeptide is also produced in cells containing a wild-type (wt) pir gene. The shorter variant of the pi protein lacks replication initiation and inhibition functions, as well as autorepressor activity in vivo. We also show that an in-frame fusion of seven N-terminal codons of the trpE gene with a pir gene lacking the first two codons produces two polypeptides which replace the 35-kDa pi protein and are of similar molecular weight. Thus, at least three options exist in the translation of the wt pir mRNA. Start codons are most likely at codon positions 1, 6 or 7, and 36 or 38. Each of these five AUG codons is preceded by a consensus ribosome-binding site (RBS).

Roles of a 106-bp origin enhancer and Escherichia coli DnaA protein in replication of plasmid R6K

A dnaA 'null' strain could not support replication of intact plasmid R6K or derivatives containing combinations of its three replication origins (alpha, gamma, beta). DnaA binds in vitro to sites in two functionally distinct segments of the central gamma origin. The 277-bp core segment is common to all three origins and contains DnaA box 2, which cannot be deleted without preventing replication. Immediately to the left of the core lies the 106-bp origin enhancer, which contains DnaA box 1. When the origin enhancer is deleted, the core alone can still initiate replication if levels of wt pi protein are decreased or if copy-up pi mutant proteins are provided in trans. DnaA does not effect expression of R6K replication initiator protein pi, although several DnaA boxes were identified in the coding segment of the pir gene, which encodes pi. Together these data suggest that a single DnaA box, 2, is sufficient for initiation from the gamma origin and might be sufficient for initiation from the gamma origin and might be sufficient and required for the activity of the alpha and beta origins as well. Implications of the DnaA protein binding to two domains of the gamma origin and the role of the 106-bp origin enhancer in replication are discussed.

Replication terminator protein of Escherichia coli is a transcriptional repressor of its own synthesis

We have investigated the regulation of synthesis of the replication terminator protein (Ter) of Escherichia coli and have discovered that the protein is a repressor of its own synthesis at the transcriptional step. Since the synthesis of Ter protein was observed to be down-regulated in vivo, these results are consistent with autoregulation as one control mechanism of Ter protein within the cell. Analysis of the tus gene that encodes the Ter protein revealed that transcription was initiated from a single promoter located within the upstream nontranscribed sequence. In vitro footprinting experiments have revealed that Ter protein prevented binding of RNA polymerase to the promoter sequence when both proteins were incubated with promoter DNA. However, once bound to the promoter, RNA polymerase could not be displaced by Ter protein. Conversely, prebound Ter protein could not be dislodged from its binding site at the promoter when challenged with RNA polymerase. Therefore, Ter protein can serve as a transcriptional repressor of its own synthesis by preventing RNA polymerase from binding to the tus promoter when both proteins are present in the cell milieu.

N-terminal truncated forms of the bifunctional pi initiation protein express negative activity on plasmid R6K replication

The replication initiation protein pi of the Escherichia coli plasmid R6K is a dual regulator in the control of plasmid copy number, functioning both as a specific initiator and inhibitor of replication. While the biochemical basis of these activities is not known, initiator activity requires binding of the protein to the seven 22 bp direct repeats within the gamma-origin region. By deleting C-terminal segments of the pi coding region, we have found that the N-terminal polypeptides of pi that are produced, corresponding to the first 117 and 164 amino acids, respectively, retain the negative activity of the bifunctional protein, i.e. these truncated pi proteins specifically inhibit R6K replication in vivo. These negatively acting polypeptides, however, are incapable of initiating replication in vivo and fail to bind to the gamma-origin of the R6K DNA in vitro. A correspondence between the observed negative activity of the N-terminal peptide and the negative regulatory activity of the intact pi protein is supported by the finding that point mutations introduced into the 164 amino acid N-terminal peptide that result in a decrease in its inhibitory activity also produce a plasmid high-copy phenotype when these mutations are incorporated into the full-length pi protein. These findings demonstrate that the negative domain of pi resides in the N-terminal segment of the protein. Furthermore, the data obtained suggest that inhibition of R6K replication by pi does not require direct binding to DNA.

Negative control of plasmid R6K replication: possible role of intermolecular coupling of replication origins

The gamma origin binding sites of the replication initiator pi protein, composed of seven 22-base-pair (bp) direct repeats and previously shown to be essential for replication of plasmid R6K, can also act as an inhibitor of R6K replication in Escherichia coli cells if provided in trans. Inhibition is dependent upon the ability of these repeats to bind the R6K-encoded pi protein but is not overcome by increasing the intracellular pi level. The insertion of a second repeat cluster in close proximity to the gamma origin also can markedly inhibit replication. The severity of this effect is dependent upon the position, orientation, and number of repeats present in the extra cluster. As few as six extra repeats can result in a completely nonfunctional gamma origin. However, this inactive gamma origin plasmid containing the six extra repeats is functional when placed in a strain that underproduces the wild-type pi protein or when placed in the presence of any of several copy-up mutant pi proteins. On the basis of these observations, we propose that the nucleoprotein structures formed by the binding of pi protein to the seven 22-bp direct repeats at the gamma origin are capable of coupling with each other in vivo and that replication initiation is prevented at such coupled origins. In support of this model of replication control, we demonstrate by electron microscopy analysis that the pi protein has the ability to associate two DNA molecules containing gamma origin sequences and also show that pi enhances the DNA ligase-catalyzed multimerization of a DNA fragment containing the gamma origin.

Protein-DNA interactions in regulation of P1 plasmid replication

The P1 RepA protein appears to play three roles in P1 plasmid replication: acting at the origin both as a specific initiator and as a repressor of transcription, and interacting with the copy-control locus incA to bring about a negative control of initiation. We have used the DNase I footprinting technique to show that RepA binds specifically to repeat units of a 19-base-pair consensus sequence present in both the origin and incA control regions. RNA polymerase was shown to bind to two specific regions within the origin repeats. One of these constitutes the known promoter sequence for the repA gene. We show evidence that the polymerase can be efficiently displaced from the promoter by subsequent RepA binding, thus providing a direct mechanism for RepA autoregulation. Under the conditions used, there were no obvious differences in the affinities of individual repeat sequences for the purified protein.

Detection of DNA looping due to simultaneous interaction of a DNA-binding protein with two spatially separated binding sites on DNA

We describe different and relatively rapid biochemical techniques to detect protein-mediated DNA looping. These techniques, based on enhancement of DNA knotting and that of ligase-catalyzed cyclization, were used to show that the replication initiator protein of plasmid R6K can bring together two intramolecular gamma origin of replication sequences located as far apart as 2 kilobases. The site-site interaction causes looping out of the intervening DNA sequence as visualized by electron microscopy. Because the autoregulatory sequence of the initiator cistron also binds initiator protein, we investigated whether the gamma origin-bound protein can participate in autoregulation by interaction of the two sites through a protein bridge. We discovered that the two sites do not interact in vitro at their natural locations when on opposite faces of the double helix. Moving the two sites to the same face of the double helix by introducing a half turn into the intervening sequence allows protein-mediated site-site interaction to occur.

Purification of Rts1 RepA protein and binding of the protein to mini-Rts1 DNA

RepA protein, essential for the replication of plasmid Rts1, was purified, and its binding to mini-Rts1 subregions was examined by a DNase I protection assay. RepA protected the incI and incII iterons, a region immediately upstream of the repA promoter, and a 10-base-pair region located between the most external incII iteron and a GATC box. The protection was less efficient when preheated RepA was used.

The integration host factor of Escherichia coli binds to multiple sites at plasmid R6K gamma origin and is essential for replication

Examination of the effect of the himA and himD mutants of E. coli on the maintenance of plasmid R6K has revealed that the gamma origin-containing replicons cannot be established in any of the mutants deficient in the production of E. coli Integration Host Factor (IHF). Contrary, the R6K derivatives containing other origins of the plasmid (alpha and/or beta) replicate in a host lacking functional IHF protein. We show that IHF protein binds specifically to a segment of the replication region which is essential for the activity of all three R6K origins. Mapping the IHF binding sequence with neocarzinostatin showed that the protein protects three segments of the origin: two strong binding sites reside within an AT-rich block, while the third, considerably weaker site is separated from the other two by a cluster of the seven 22 bp direct repeats. These seven repeats have been shown previously to bind the R6K-encoded initiator protein pi. We also demonstrate that the establishment of pi-origin complexes prior to IHF addition prevents the binding of the IHF protein to the gamma origin. The binding sequences of IHF and pi proteins do not overlap, therefore, we propose that the binding of pi protein alters the structure of the DNA and thereby prevents the subsequent binding of IHF protein.

Mini-P1 plasmid replication: the autoregulation-sequestration paradox

It has been proposed that the initiator protein RepA is rate limiting for mini-P1 plasmid replication, and that the role of the plasmid copy number control locus is to sequester the initiator and thus reduce replication. This proposal appears inconsistent with the observation that RepA is autoregulated, since the protein lost by sequestration should be replenished. A resolution of this autoregulation-sequestration paradox is possible if the sequestered RepA, unavailable for replication, is still available for promoter repression. We demonstrate that RepA binds to the control locus and to the promoter region simultaneously, causing the intervening DNA to loop. DNA looping could provide the requisite mechanism by which RepA bound to the control locus might exert repression.

An initiator protein for plasmid R6K DNA replication. Mutations affecting the copy-number control

Two kinds of mutations affecting the copy-number control of plasmid R6K were isolated and identified in an initiator pi protein by DNA sequencing. Firstly, a temperature-sensitive replication mutation, ts22, with decreased copy number results in a substitution of threonine to isoleucine at position 138 of the 305-amino-acid pi protein. Secondly, a high-copy-number (cop21) mutant was isolated from this ts mutant and was identified by an alteration of alanine to serine at position 162. This cop21 mutation suppressed the Ts character and was recessive to the wild-type allele in the copy control.

A replication initiator protein enhances the rate of hybrid formation between a silencer RNA and an activator RNA

The replication origin gamma of plasmid R6K in certain miniplasmids is kept silent by a silencer RNA. We have identified a major and three minor transcripts that are synthesized in a direction antiparallel and complementary to the silencer RNA. The major RNA, called the activator, is essential for replication from ori gamma. The complementary nature of the activator and silencer RNAs strongly suggests that the former is a target of the latter. We have also discovered that the initiator protein is a sequence-specific double-stranded RNA-binding protein that accelerates the rate of activator-silencer hybrid formation. Thus the efficient silencing of ori gamma can be explained by silencer RNA-activator RNA hybrid formation that is driven to completion by the initiator protein.