Multiscale Design of Array-Type Integrated Electrodes for Gas-Involving Electrocatalytic Reactions

Oxygen evolution/hydrogen evolution/oxygen reduction reactions (OER/HER/ORR) are core processes of electrochemical energy conversion technologies, which are of great significance to sustainable society. With the common gas-involving characteristic, these electrocatalytic reactions are inevitably faced with sluggish intrinsic kinetics at large current conditions, due to difficult mass transfer in multiphase conversion processes. Accordingly, array-type integrated electrodes are regarded as a promising solution, while relevant design strategies are systematically summarized from multiscale perspectives in this review. On one hand, macroscopic multidimensional structural designs are illustrated considering advantages and limitations of various one/two/three-dimensional (1D, 2D, 3D) array units; on the other hand, microscopic chemical/interfacial structural designs are emphasized by various strategies including ionic regulation, vacancy design, phase conversion, and interface engineering, etc. Furthermore, composite strategies are discussed in terms of surface, hierarchical, phase and atomic levels, especially on how to integrate macroscopic structural and microscopic chemical designs simultaneously. Finally, design rules of array-type integrated electrodes as well as outlooks for mass transfer strategies toward gas-involving reactions are provided.

Modulating Ionic Hysteresis to Selective Interaction Mechanism toward Transition from Supercapacitor-Memristor to Supercapacitor-Diode

The emerging ion-confined transport supercapacitors, including supercapacitor-diodes (CAPodes) and supercapacitor-memristors (CAPistors), offer potential for neuromorphic computing, brain-computer interface, signal propagation, and logic operations. This study reports a novel transition from CAPistor to CAPode via electrochemical cycling of a ZIF-7 electrode. X-ray absorption fine structure (XAFS) and electrochemical analyses reveal a shift from "ionic hysteresis" to "ionic selective interaction" in an alkaline electrolyte, elucidating the evolution of ionic devices. The CAPodes exhibit high rectification ratios, long cycling stability, and effective current blocking in reverse bias. Additionally, they are demonstrated in ionic logic circuits ("AND" and "OR" gates), with comparisons to traditional electronic diodes. This work advances the development of functional supercapacitors and iontronic devices for future capacitive computing architectures.

Improving micro-grid management: A review of integration of supercapacitor across different operating modes

The field of electrical energy is moving through many rapid changes and continuous development, especially with the huge boom in the field of artificial intelligence (AI) and the presence of renewable energy systems (RESs). Simultaneously with this development, it was necessary to have energy storage systems such as super capacitors and batteries. This necessity increased with sudden changes in climate or loads that affect the output of generation systems such as solar and wind energy systems. The main goal of this study is to focus on supercapacitors as a future solution with high reliability. It studies all the various factors and operational modes such as the principle of operation, installation, types and modeling of supercapacitors. The study also focused on the employment of supercapacitors in diverse applications, especially in microgrids with their various systems including control and energy management strategies for these systems and investigating the integration between AI, supercapacitors and microgrids and the outcome of this integration. Besides, this research intends to a proposal for a hybrid energy storage systems (HESS) suitable for different loads, including solar cells as main source with supercapacitors and batteries. In addition, it proposes the energy management system (EMS) as well as appropriate control system, to solve the problems of utilities and microgrids and meet the power demand of loads for different operating conditions.

Enhanced Capacitive Performance of Microwave-Driven CNTs on Carbonized Cigarette Filter Waste for Sustainable Energy Storage

Microplastic pollution represents a significant global environmental issue, with cigarette filters being a major contributor due to their slow biodegradation. To address this issue while creating valuable materials, we developed a novel approach to synthesize nitrogen-doped carbon nanotubes on carbonized cigarette filter powder (NCNT@cCFP) using a microwave irradiation and nickel-catalyzed process. The successful incorporation of nitrogen (~6.6 at.%) and the enhanced graphitic structure create a hierarchical conductive network with abundant active sites for electrochemical reactions. The resulting NCNT@cCFP electrode exhibits a specific capacitance of 452 F/g at 1 A/g in a three-electrode configuration. The integrated hierarchical structure facilitates efficient electron transport and ion diffusion, leading to excellent rate capability (91.6% at 10 A/g) and cycling stability (96.5% retention after 5000 cycles). Furthermore, a symmetric supercapacitor device demonstrates promising energy storage capability with a maximum energy density of 14.0 Wh/kg at 483.1 W/kg, while maintaining 10.4 Wh/kg at a high power density of 4419.1 W/kg. This synergistic waste recycling strategy combined with microwave-driven synthesis offers a sustainable pathway for developing high-performance energy storage materials.

Porphyrin-Based Covalent Organic Polymer Wrapped MWCNT Electrodes under Moderate Salt Concentration for Super-Stable Aqueous Sodium-Ion Intercalated Sustainable Supercapacitor

To rival commercial organic electrolytes, it is important to focus on safe, cheap aqueous electrolytes with lower salt concentration (≈5.0 m) and a wider electrochemical stable potential window (ESPW). This study reports the facile synthesis of porphyrin-based covalent organic polymers (PTZ-COP, CBZ-COP, and TPA-COP) through a one-pot aromatic electrophilic polycondensation reaction between pyrrole and monomeric aldehydes (PTZ-CHO, CBZ-CHO and TPA-CHO). To enhance conductivity, these covalent organic polymers (COPs) were noncovalently wrapped on multiwall carbon nanotubes (MWCNTs), forming MWCNT@PTZ-COP, MWCNT@CBZ-COP and MWCNT@TPA-COP. Among all, phenothiazine-based COPs wrapped on MWCNT viz. MWCNT@PTZ-COP stands out, exhibiting notable surface area and redox-active moieties with high heteroatom (N, S) contents in the framework. These properties contribute to its superior performance in the form of an electrochemical double-layer capacitor (EDLC) and pseudocapacitor. In the three-electrode, the MWCNT@PTZ-COP achieves a wider ESPW of 2.2 V, demonstrates a remarkable specific capacitance of 292.7 F g-1 along with an energy density 196.8 Wh kg-1 and power density of 752 W kg-1, at a current density of 0.7 A g-1 in 5 m NaClO4. As-designed symmetric supercapacitor cell of MWCNT@PTZ-COP demonstrates an impressive specific capacitance of 55.5 F g-1 and energy density 37.3 Wh kg-1, respectively. Additionally, it exhibits a high areal capacitance of 46.4 mF cm-2 in 5 m NaClO4. Moreover, it exhibits outstanding 100% capacitance retention after running 20 000 GCD cycles at 3.2 A g-1. This system demonstrates the highest cell voltage for a porphyrin-based COPs aqueous symmetric supercapacitor with a high energy density and stability.

Impact of Activation Conditions on the Electrochemical Performance of Rice Straw Biochar for Supercapacitor Electrodes

Biochar, derived from agricultural waste, has gained significant attention as a sustainable material for energy storage applications due to its high surface area, tunable porosity, and environmental benefits. This study investigates the electrochemical performance of rice straw biochar (RSBC) as an electrode material, with a focus on the effects of activation temperature, activation ratio, and activation time. Among the prepared samples, RSBC-2, activated at 800 °C with a 1:2 KOH ratio for 0.5 h, exhibited the best electrochemical performance. Characterization of RSBC and RSBC-2 showed significant improvements in surface area and pore structure. Specifically, the BET surface area of RSBC-2 increased to 939.40 m2 g-1, with a reduced average pore size of 2.27 nm. Electrochemical testing revealed that RSBC-2 achieved specific capacitances of 296, 281, 272, 260, and 240 F g-1 at current densities of 0.2, 0.5, 1, 2, and 5 A g-1, respectively, with a capacity retention rate of 81%. The improved electrochemical performance of RSBC-2 is attributed to its larger surface area and enhanced pore structure, which facilitate better charge storage and overall electrochemical behavior, making it a promising candidate for energy storage applications.

Structure and Morphological Properties of Cobalt-Oxide-Based (Co3O4) Materials as Electrodes for Supercapacitors: A Brief Review

Over the past 15 years, there has been a significant increase in the search for environmentally friendly energy sources, and transition-metal-based energy storage devices are leading the way in these new technologies. Supercapacitors are attractive in this regard due to their superior energy storage capabilities. Electrode materials, which are crucial components of supercapacitors, such as cobalt-oxide-based electrodes, have great qualities for achieving high supercapacitor performance. This brief review presents some basic concepts and recent findings on cobalt-based materials used to fabricate electrodes for supercapacitors. The text also clarifies how morphological characteristics typically influence certain properties. The inner surface of the electrode exhibits several properties that change to provide it a great boost in specific capacitance and charge storage. Porous structures with defined pore sizes and shapes and high surface areas are important features for improving electrochemical properties. Finally, we present some perspectives for the development of cobalt-oxide-based supercapacitors, focusing on their structure and properties.

Hierarchical porous sulfur self-doped lignin carbon derived from full component utilization of black liquor for high-performance supercapacitors

Black liquor, primarily consisting of lignin, polysaccharides, and inorganic substances, is a potential precursor of porous carbon materials for high-performance supercapacitors. However, the laborious purification of black liquor lignin and the introduction of exogenous heteroatoms have hindered their practical applications. Herein, the full components of black liquor were utilized to synthesize hierarchical porous sulfur self-doped lignin carbons (S-LCs) through a self-activation process aimed at improving the performance of supercapacitors. Benefiting from the intensified reactivity and crosslinking degree of the polysaccharide component and the sulfur self-doping and self-activation effect of inorganic substances, the resulting S-LCs exhibit a high specific surface area (SSA), abundant porous structure, and enhanced defect activity, all contributing toward increasing the energy storage capacity of supercapacitors. The as-obtained S-LC-G250/700 features a high SSA of 892.94 m2 g-1 and a sulfur content of 3.3 at.%. The S-LC-G250/700 demonstrates excellent specific capacitance (e.g., 405.06 F g-1 at 0.5 A g-1), remarkable stability (103 % capacity retention after 10,000 cycles), and high energy density of 30.4 Wh kg-1. Density functional theory calculations verified the advantages of the high-content sulfur self-doping of black liquor, suggesting that self-doped sulfur contributes to charge adsorption on porous carbon surfaces and promotes electron transfer in the electrolyte.

Introduction of 1D rGO nanoribbons as spacers between 2D MXenes for a high-performance electrode for supercapacitors

Two-dimensional (2D) transition-metal carbide Ti3C2TX (MXene) possesses good electrical conductivity, high specific surface areas and metal oxide-like surfaces, which make it ideal for application in supercapacitors with both high energy density and power density. However, similar to other 2D materials, the issue of self-stacking leads to narrower ion-transport channels, along with a drastic reduction in active sites, thus severely limiting the performance of MXene-based electrodes. To address this problem, this work proposes to introduce one-dimensional (1D) reduced graphene oxide (rGO) nanoribbons as spacers between MXene nanosheets to construct a composite structure for inhibiting self-stacking. As expected, owing to the steric effect and high aspect ratio of rGO nanoribbons, the fabricated MXene/rGO hybrid electrode, with the addition of 5 wt% graphene oxide (GO), exhibits a greatly improved specific capacitance (397.4 F g-1 at 5 mV s-1) and an unparalleled rate capability (with a capacitance retention of 52.9% at 2000 mV s-1). This work sheds significant light on the development of MXene-based materials for advanced energy storage devices.

Leaf-Inspired Hetero-Structure WS2/WO3 In Situ Embedded on Pomelo Peel Derived Carbon for Supercapacitor and Capacitive Deionization

Composite materials have occupied a reliable position in electrochemical energy storage and conversion due to their double electric layer and pseudocapacitance. In this work, a leaf-like heterostructure composite, obtained by peeling - carbonizing - in situ sulfuration/oxidation approach for the first time, is investigated as electrode material for electrochemical capacitance behavior. The thin and highly active transition metal WS2 acts as an energetic "blade" to trap free ions, which are then transported across the material through a strong "tendon skeleton" WO3. The derived carbon PPC with a large aspect ratio holds up the overall leaf structure, also as a "warehouse" for ion storage, thus enhancing the conductivity and wettability of the material. The above three (WS2+WO3+PPC) synergistically provide outstanding double-layer capacitance and pseudocapacitance. In particular, the vacancy defects, constructed at the heterogenous interface from WS2-WO3 in situ growth, can still achieve superior ion absorption/desorption ability even under large current density and high concentration brackish solution.

Current insights and future prospects of graphene aerogel-enhanced supercapacitors: A systematic review

Supercapacitors present a compelling alternative to conventional batteries, offering rapid energy storage and high power density. Despite their advantages, they typically fall short in energy density compared to traditional batteries, primarily due to limitations in electrode materials. Graphene Aerogels (GA) have emerged as a promising solution to enhance supercapacitor performance because of their unique properties, such as high surface area and excellent conductivity. This systematic review provides a comprehensive analysis of recent advancements in GA technology, focusing on their synthesis methods and applications in supercapacitors. It highlights significant improvements that GA can bring to Electric Double-Layer Capacitors (EDLCs), pseudocapacitors, and hybrid supercapacitors. Additionally, the review explores GA's potential for enhancing electric generators and integrating into flexible, wearable technologies. Future research directions are emphasised, particularly regarding GA's potential applications in waste management and environmental protection. The review was conducted through a thorough literature search, prioritising peer-reviewed sources related to GA synthesis and supercapacitor applications. Methodological quality and potential biases of the included studies were assessed using principles similar to the Cochrane Risk of Bias tool. Thematic analysis was employed to synthesise findings and identify key trends and challenges. Limitations such as potential biases and methodological variations are discussed. Overall, this review highlights the technological prospects of GA and provides guidance for future research in supercapacitor development and applications.

A comprehensive review of PETW recycling for supercapacitor applications

The rising measure of waste produced from polyethene terephthalate (PET) and the interest in eco-accommodating energy storage arrangements have prompted escalated examination into reusing waste PET into supercapacitors. This review aims to provide a comprehensive overview of the most recent advancements in the recycling of polyethylene terephthalate waste (PETW), as a supercapacitor electrode precursor. The review looks at different methodologies for recovering PET from waste, including mechanical, chemical, enzyme, etc. It further explores the combination strategies for electrode materials produced using PET. Besides, PET-derived materials' electrochemical performance in supercapacitor application is likewise broken down, with an emphasis on key electrochemical boundaries like capacitive behaviour, cyclic stability, and electrochemical impedance spectroscopy. The need for scalable and cost-effective recycling methods, the creation of eco-friendly electrolytes, and the improvement of the electrochemical performance of recycled PET-based supercapacitors are just a few of the issues and opportunities highlighted in this expanding eco-friendly industry. Overall, the goal of this review is to provide a comprehensive understanding of the cutting-edge developments in the use of recycled PETW as a precursor for supercapacitor electrodes, highlighting the eco-friendly energy storage solution's potential and contributing to a sustainable future.

Thiocyanogen-modulated N, S Co-doped lignin hierarchical porous carbons for high-performance aqueous supercapacitors

Constructing heteroatom-doped porous carbons with distinct charge storage properties is significant for high-energy-density supercapacitors, yet it remains a formidable challenge. Herein, we employed a thiocyanogen-modulated alkali activation strategy to synthesize N and S co-doped lignin hierarchical porous carbon (NSLHPC). In this process, thiocyanogen serves as a surface modulation mediator to substitute oxygen with nitrogen and sulfur species, while the combination of KOH activation and MgO template generates numerous nanopores within the carbon structure. The three-dimensional interconnected nanosheet architecture facilitates rapid ion transfer and enhances accessibility to active sites. Density functional theory (DFT) calculations demonstrate that introducing N and S heteroatoms through oxygen substitution reduces the adsorption energy barrier of Zn2+. Consequently, the optimized NSLHPC exhibits a remarkable specific capacitance of 438F/g at 0.5 A/g in 6 M KOH, delivering an energy density of 10.4 Wh/kg in the symmetric supercapacitor and an impressive energy density of 104.9 Wh/kg in the zinc-ion hybrid capacitor. The NSLHPC cathode also shows an excellent lifespan with capacitance retention of 99.0 % and Columbic efficiency of 100 % over 10,000 cycles. This study presents innovative strategies for engineering high-performance porous carbon electrode materials by emphasizing pore structure modulation and N, S co-doping as crucial approaches.

Effect of Mixed Morphology (Simple Cubic, Face-Centered Cubic, and Body-Centered Cubic)-Based Electrodes on the Electric Double Layer Capacitance of Supercapacitors

Supercapacitors store energy due to the formation of an electric double layer (EDL) at the interface of the electrodes and electrolyte. The present article deals with the finite element study of equilibrium electric double layer capacitance (EDLC) in the mixed morphology electrodes comprising all three fundamental crystal structures, simple cubic (SC), body-centered cubic (BCC), and face-centered cubic morphologies (FCC). Mesoporous-activated carbon forms the electrode in the supercapacitor with (C2H5)4NBF4/propylene carbonate organic electrolyte. Electrochemical interference is clearly demonstrated in the supercapacitors with the formation of the potential bands, as in the case of interference theory due to the increasing packing factor. The effects of electrode thickness varying from a wide range of 50 nm to 0.04 mm on specific EDLC have been discussed in detail. The interfacial geometry of the unit cell in contact with the electrolyte is the most important parameter determining the properties of the EDL. The critical thickness of the electrodes is 1.71 μm in all the morphologies. Polarization increases the interfacial potential and leads to EDL formation. The Stern layer specific capacitance is 167.6 μF cm-2 in all the morphologies. The maximum capacitance is in the decreasing order of interfacial geometry, as FCC > BCC > SC, dependent on the packing factor. The minimum transmittance in all the morphologies is 98.35%, with the constant figure of merit at higher electrode thickness having applications in the chip interconnects. The transient analysis shows that the interfacial current decreases with increasing polarization in the EDL. The capacitance also decreases with the increase of the scan rate.

Mesoporous Cubic Nanocages Assembled by Coupled Monolayers With 100% Theoretical Capacity and Robust Cycling

High capacity and long cycling often conflict with each other in electrode materials. Despite extensive efforts in structural design, it remains challenging to simultaneously achieve dual high electrochemical properties. In this study, we prepared brand-new completely uniform mesoporous cubic-cages assembled by large d-spacing Ni(OH)2 coupled monolayers intercalated with VO4 3- (NiCMCs) using a biomimetic approach. Such unique mesoporous structural configuration results in an almost full atomic exposure with an amazing specific surface area of 505 m2/g and atomic utilization efficiency close to the theoretical limit, which is the highest value and far surpasses all of the reported Ni(OH)2. Thus, a breakthrough in simultaneously attaining high capacity approaching the 100% theoretical value and robust cycling of 10,000 cycles is achieved, setting a new precedent in achieving double-high attributes. When combined with high-performance Bi2O3 hexagonal nanotubes, the resulting aqueous battery exhibits an ultrahigh energy density of 115 Wh/kg and an outstanding power density of 9.5 kW/kg among the same kind. Characterizations and simulations reveal the important role of large interlayer spacing intercalation units and mesoporous cages for excellent electrochemical thermodynamics and kinetics. This work represents a milestone in developing "double-high" electrode materials, pointing in the direction for related research and paving the way for their practical application.

Rational Design of Nanosheet Array-Like Layered-Double-Hydroxide-Derived NiCo2O4 In Situ Grown on Reduced-Graphene-Oxide-Coated Nickel Foam for High-Performance Solid-State Supercapacitors

The investigation of high-performance supercapacitors is essential for accelerating the development of energy storage devices. In this work, a 3D hierarchical nanosheet array-like nickel cobaltite/reduced graphene oxide/nickel foam composite (NiCo2O4/rGO/NF) was assembled via an aqueous coprecipitation-hydrothermal strategy assisted by citric acid. Benefiting from a NiCo layered-double-hydroxide precursor with an atomic-level lattice confinement effect of metal ions and effective hybridization with rGO, the NiCo2O4/rGO/NF composite is featured as thin NiCo2O4 nanosheets (∼113.6 nm × 11.2 nm) composed of NiCo2O4 nanoparticles (∼10.9 nm) vertically staggered on the surface of a rGO-modified NF skeleton, leading to high surface area, abundant mesoporous structure, and active site exposure. The as-obtained NiCo2O4/rGO/NF was directly used as a binder-free integrated electrode for supercapacitors, achieving an excellent specific capacitance of 2863.4 F g-1 (1503.3 C g-1) at 1 A g-1, a superior rate performance of 2335.2 F g-1 at 20 A g-1, and a stability retention of 91.7% after 5000 cycles. More impressively, a solid-state asymmetric supercapacitor assembled by the present NiCo2O4/rGO/NF integrated electrode as the positive electrode and commercial activated carbon as the negative electrode achieved a high energy density of 69.2 Wh kg-1 at a power density of 800 W kg-1, and the energy density at a peak power density of 20004 W kg-1 still remained at 48.9 Wh kg-1, also showing a good cycling stability of 87.2% retention over 10000 cycles. The present facile synthesis strategy of the as-obtained NiCo2O4/rGO/NF nanosheet array composite can be used for the design and construction of many other transition-metal oxide/graphene/NF composite materials with excellent structural stability and performance in energy storage and other related areas.

The application of plasma technology for the preparation of supercapacitor electrode materials

With the rapidly growing demand for clean energy and energy interconnection, there is an urgent need for rapid and high-capacity energy storage technologies to realize large-scale energy storage, transfer energy, and establish the energy internet. Supercapacitors, which have advantages such as high specific capacitance, fast charging and discharging rates, and long cycle lifetimes, are being widely used in electric vehicles, information technology, aerospace, and other fields. The performance of supercapacitors is crucially dependent on electrode materials. These can be categorized into electric double-layer capacitors and pseudocapacitors, primarily made from carbon and transition metal oxides, respectively. However, effectively monitoring the physicochemical properties of electrode materials during preparation and processing is challenging, which limits the improvement of supercapacitors' performance. Plasma materials preparation technology can effectively affect the materials preparation processing by energetic electrons, ions, free radicals, and multiple effects in plasma, which are easily manipulated by operation parameters. Therefore, plasma material preparation technology is considered a promising method to precisely monitor the physicochemical and electrochemical properties of energy storage materials and has been widely studied. This paper provides an overview of plasma materials preparation mechanisms, and details of the plasma technology application in the preparation of transition metal hybrids, carbon, and composite electrode materials, as well as a comparison with traditional methods. In conclusion, the advantages, challenges, and research directions of plasma materials preparation technology in the field of electrode materials preparation are summarized.

Design and construction of hollow metal sulfide/selenide core-shell heterostructure arrays for hybrid supercapacitor

Transition metal sulfides and selenides are common electrode materials in supercapacitors. However, the slow redox kinetics and structural collapse during charge-discharge cycles of single-component materials have impeded their electrochemical performance. In this study, hollow Co9S8 nanotubes were synthesized through a rational morphology design approach. Subsequently, NiSe2 or Co0.85Se was electrodeposited onto the Co9S8 nanotubes, yielding two core-shell heterostructure arrays, namely, NiSe2@Co9S8 and Co0.85Se@Co9S8. By fully leveraging the advantages and synergistic effects of these dual-phase heterostructures, the NiSe2@Co9S8 and Co0.85Se@Co9S8 configurations demonstrated outstanding areal capacitances of 12.54 F cm-2 and 9.61 F cm-2, respectively, at 2 mA cm-2. When integrated with activated carbon in hybrid supercapacitors, the NiSe2@Co9S8//AC and Co0.85Se@Co9S8//AC devices exhibited excellent energy storage performance, with energy densities of 0.959 mW h at 1.681 mW and 0.745 mW h at 1.569 mW, respectively. Additionally, these hybrid supercapacitors demonstrated remarkable cycling stability, with capacitance retention of 87.5% and 89.5% after 5000 cycles for NiSe2@Co9S8//AC and Co0.85Se@Co9S8//AC, respectively. This study provides a novel approach to the synthesis of multiphase core-shell heterostructures based on metal sulfides and selenides, opening new avenues for future research.

Bottom-Up Magnesium Deposition Induced by Paper-Based Triple-Gradient Scaffolds toward Flexible Magnesium Metal Batteries

The development of advanced magnesium metal batteries (MMBs) has been hindered by longstanding challenges, such as the inability to induce uniform magnesium (Mg) nucleation and the inefficient utilization of Mg foil. This study introduces a novel solution in the form of a flexible, lightweight, paper-based scaffold that incorporates gradient conductivity, magnesiophilicity, and pore size. This design is achieved through an industrially adaptable papermaking process in which the ratio of carboxylated multi-walled carbon nanotubes to softwood cellulose fibers is meticulously adjusted. The triple-gradient structure of the scaffold enables the regulation of Mg ion flux, promoting bottom-up Mg deposition. Owing to its high flexibility, low thickness, and reduced density, the scaffold has potential applications in flexible and wearable electronics. Accordingly, the triple-gradient electrodes exhibit stable operation for over 1200 h at 3 mA cm-2 /3 mAh cm-2 in symmetrical cells, markedly outperforming the non-gradient and metallic Mg alternatives. Notably, this study marks the first successful fabrication of a flexible MMB pouch full cell, achieving an impressive volumetric energy density of 244 Wh L-1 . The simplicity and scalability of the triple-gradient design, which uses readily available materials through an industrially compatible papermaking process, open new doors for the production of flexible, high-energy-density metal batteries.

Unveiling the Latest Advancements in Vanadium Carbide MXene based Supercapacitors and their Future Trends

Vanadium-carbide-based MXenes have bewitched the scientific community due to their distinctive characteristics, which make them potential candidates for several technological applications, such as supercapacitors (SCs), batteries, gas separation, biological sensors, and desalination. This article provides an overview of recent developments in the synthesis and applications of vanadium-carbide MXene in SCs. Vanadium carbide is one of the most difficult MXenes to synthesize, and various synthesis techniques, including electrochemical exfoliation and chemical etching, have been utilized to fabricate this material. Additionally, the review article also emphasizes the potential use of vanadium carbide MXene as SCs. Finally, the paper concludes with the challenges faced in the synthesis process and the prospects of vanadium carbide MXene-based material fabrication. Overall, this review article provides in-depth and detailed information on recent research on vanadium carbide MXene and its possible uses.

Recent Advances on Nitrogen-Doped Porous Carbons Towards Electrochemical Supercapacitor Applications

Due to ever-increasing global energy demands and dwindling resources, there is a growing need to develop materials that can fulfil the World's pressing energy requirements. Electrochemical energy storage devices have gained significant interest due to their exceptional storage properties, where the electrode material is a crucial determinant of device performance. Hence, it is essential to develop 3-D hierarchical materials at low cost with precisely controlled porosity and composition to achieve high energy storage capabilities. After presenting the brief updates on porous carbons (PCs), then this review will focus on the nitrogen (N) doped porous carbon materials (NPC) for electrochemical supercapacitors as the NPCs play a vital role in supercapacitor applications in the field of energy storage. Therefore, this review highlights recent advances in NPCs, including developments in the synthesis of NPCs that have created new methods for controlling their morphology, composition, and pore structure, which can significantly enhance their electrochemical performance. The investigated N-doped materials a wide range of specific surface areas, ranging from 181.5 to 3709 m2  g-1 , signifies a substantial increase in the available electrochemically active surface area, which is crucial for efficient energy storage. Moreover, these materials display notable specific capacitance values, ranging from 58.7 to 754.4 F g-1 , highlighting their remarkable capability to effectively store electrical energy. The outstanding electrochemical performance of these materials is attributed to the synergy between heteroatoms, particularly N, and the carbon framework in N-doped porous carbons. This synergy brings about several beneficial effects including, enhanced pseudo-capacitance, improved electrical conductivity, and increased electrochemically active surface area. As a result, these materials emerge as promising candidates for high-performance supercapacitor electrodes. The challenges and outlook in NPCs for supercapacitor applications are also presented. Overall, this review will provide valuable insights for researchers in electrochemical energy storage and offers a basis for fabricating highly effective and feasible supercapacitor electrodes.

High Energy Density Supercapacitors: An Overview of Efficient Electrode Materials, Electrolytes, Design, and Fabrication

Supercapacitors (SCs) are potentially trustworthy energy storage devices, therefore getting huge attention from researchers. However, due to limited capacitance and low energy density, there is still scope for improvement. The race to develop novel methods for enhancing their electrochemical characteristics is still going strong, where the goal of improving their energy density to match that of batteries by increasing their specific capacitance and raising their working voltage while maintaining high power capability and cutting the cost of production. In this light, this paper offers a succinct summary of current developments and fresh insights into the construction of SCs with high energy density which might help new researchers in the field of supercapacitor research. From electrolytes, electrodes, and device modification perspectives, novel applicable methodologies were emphasized and explored. When compared to conventional SCs, the special combination of electrode material/composites and electrolytes along with their fabrication design considerably enhances the electrochemical performance and energy density of the SCs. Emphasis is placed on the dynamic and mechanical variables connected to SCs' energy storage process. To point the way toward a positive future for the design of high-energy SCs, the potential and difficulties are finally highlighted. Further, we explore a few important topics for enhancing the energy densities of supercapacitors, as well as some links between major impacting factors. The review also covers the obstacles and prospects in this fascinating subject. This gives a fundamental understanding of supercapacitors as well as a crucial design principle for the next generation of improved supercapacitors being developed for commercial and consumer use.

Progress and Perspectives on Promising Covalent-Organic Frameworks (COFs) Materials for Energy Storage Capacity

In recent years, a new class of highly crystalline advanced permeable materials covalent-organic frameworks (COFs) have garnered a great deal of attention thanks to their remarkable properties, such as their large surface area, highly ordered pores and channels, and controllable crystalline structures. The lower physical stability and electrical conductivity, however, prevent them from being widely used in applications like photocatalytic activities and innovative energy storage and conversion devices. For this reason, many studies have focused on finding ways to improve upon these interesting materials while also minimizing their drawbacks. This review article begins with a brief introduction to the history and major milestones of COFs development before moving on to a comprehensive exploration of the various synthesis methods and recent successes and signposts of their potential applications in carbon dioxide (CO2 ) sequestration, supercapacitors (SCs), lithium-ion batteries (LIBs), and hydrogen production (H2 -energy). In conclusion, the difficulties and potential of future developing with highly efficient COFs ideas for photocatalytic as well as electrochemical energy storage applications are highlighted.

Research Progress in Fluid Energy Collection Based on Friction Nanogenerators

In recent decades, the development of electronic technology has provided opportunities for the Internet of Things, biomedicine, and energy harvesting. One of the challenges of the Internet of Things in the electrification era is energy supply. Centralized energy supply has been tested over hundreds of years of history, and its advantages such as ideal output power and stable performance are obvious, but it cannot meet the specific needs of the Internet of Things, and distributed energy supply also has a large demand. Since the invention of nanogenerators, another promising solution for fluid energy harvesting has been opened up. The triboelectric nanogenerator is an emerging platform technology for electromechanical energy conversion, which can realize the collection of fluid energy such as wind energy and wave energy. In this paper, we first introduce the fundamentals of triboelectric nanogenerators and their applications in wind and wave energy harvesting devices. We then discuss the methods of device optimization in the next development of TENG and conclude by considering the future prospects and challenges for triboelectric nanogenerator harvesting devices.

Iron Nanoparticles Wrapped with an N-Doped Carbon Material Produced by Using a Zinc Hydroxide Ferrocyanide Nanohybrid for Use in Commercial-like Supercapacitors

According to the technology of carbon-based supercapacitors, modifying the structure of carbon as an active electrode material leads to an increase in capacitance. A modification involves introducing heteroatoms such as nitrogen into the carbon structure and composing it with metals such as iron. In this research, an anionic source called ferrocyanide was used to produce N-doped carbon consisting of iron nanoparticles. In fact, ferrocyanide was located as a guest between the layers of a host material, which is zinc hydroxide in the α phase. This new nanohybrid material was then heat-treated under Ar, and the heated product after acid washing was iron nanoparticles wrapped with N-doped carbon materials. This material was used as an active material in the production of symmetric supercapacitors with different organic (TEABF₄ in acetonitrile) and aqueous (sodium sulfate) electrolytes as well as a new electrolyte (KCN in methanol). Accordingly, the supercapacitor made by the N/Fe-carbon active material and the organic electrolyte showed a capacitance value of 21 F/g at a current density of 0.1 A/g. This value is comparable to and even higher than the values observed in commercial supercapacitors.

N, S, O Self-Doped Carbon Derived from Grapefruit Peel for High-Performance Supercapacitors

The development of high-capacity carbon for supercapacitors is highly desirable but challenging. In this work, we design a N, S, O self-doped carbon electrode (NSOC-800) with high capacitance and good stability via the carbonization of grapefruit peel via a one-step KOH activation method without extra dopants. The existence of heteroatoms enables the NSOC-800 to have a high specific capacitance of 280 F/g and a great cycling performance, with 90.1% capacitance retention after 5000 cycles. Moreover, the symmetric supercapacitor with NSOC-800 electrodes delivers a maximum energy density of 5 Wh/kg with a power density of 473 W/kg. Such a promising method to achieve carbon materials with self-doping heteroatwoms is of great significance for developing highly efficient electrodes for energy storage devices.

Design strategies of covalent organic framework-based electrodes for supercapacitor application

Supercapacitors (SCs) have been recognized as a promising electrochemical energy storage (EES) device, thanks to their high-power density, long lifespan, fast charge-discharge capability, and eco-friendliness. The breakthrough of electrode materials that determine the electrochemical performance of SCs is urgently desired. Covalent organic frameworks (COFs), an emerging and burgeoning class of crystalline porous polymeric materials, have been found to have huge potential for application in EES devices by virtue of their unique properties including atomically adjustable structures, robust and tunable skeletons, well-defined and open channels, high surface areas, etc. In this feature article, we aim at summarizing the design strategies of COF-based electrode materials for SCs based on the representative advances. The current challenges and future perspectives of COFs for SC application are highlighted as well.

Hierarchical hollow tubular fibrous brucite-templated carbons obtained by KOH activation for supercapacitors

Hierarchical hollow tubular porous carbons have been widely used in applications of supercapacitors, batteries, CO₂ capture and catalysis due to their hollow tubular morphology, large aspect ratio, abundant pore structure and superior conductivity. Herein, hierarchical hollow tubular fibrous brucite-templated carbons (AHTFBC_s) were prepared using natural mineral fiber brucite as the template and KOH as the chemical activator. The effects of different KOH additions on the pore structure and capacitive performance of AHTFBC_s were systematically studied. The specific surface area and micropore content of AHTFBC_s after KOH activation were higher than those of HTFBC. The specific surface area of the HTFBC is 400 m² g^-1, while the activated AHTFBC₅ has a specific surface area of up to 625 m² g^-1. In particular, compared with HTFBC (6.1%), a series of AHTFBC_s (22.1% for AHTFBC₂, 23.9% for AHTFBC₃, 26.8% for AHTFBC₄ and 22.9% for AHTFBC₅) with significantly increased micropore content were prepared by controlling the amount of KOH added. The AHTFBC₄ electrode displays a high capacitance of 197 F g^-1 at 1 A g^-1 and the capacitance retention of 100% after 10 000 cycles at 5 A g^-1 in the three-electrode system. And an AHTFBC₄//AHTFBC₄ symmetric supercapacitor exhibits the capacitance of 109 F g^-1 at 1 A g^-1 in 6 M KOH and an energy density of 5.8 W h kg^-1 at 199.0 W kg^-1 in 1 M Na₂SO₄ electrolyte. In addition, the capacity retention of AHTFBC₄ in the symmetric supercapacitor was maintained at 92% after 5000 cycles in both 6 M KOH and 1 M Na₂SO₄ electrolytes.

Boosting capacitive performance of N, S co-doped hierarchical porous lignin-derived carbon via self-assembly assisted template-coupled activation

Heteroatom-doped porous carbon materials show promise for use as supercapacitor electrodes, but the tradeoff between surface area and the heteroatom dopant levels limits the supercapacitive performance. Here, we modulated the pore structure and surface dopants of N, S co-doped hierarchical porous lignin-derived carbon (NS-HPLC-K) via self-assembly assisted template-coupled activation. The ingenious assembly of lignin micelles and sulfomethylated melamine into a magnesium carbonate basic template greatly promoted the KOH activation process, which endowed the NS-HPLC-K with uniform distributions of activated N/S dopants and highly accessible nanosized pores. The optimized NS-HPLC-K exhibited a three-dimensional hierarchically porous architecture composed of wrinkled nanosheets and a high specific surface area of 2538.3 ± 9.5 m²/g with a rational N content of 3.19 ± 0.01 at.%, which boosted the electrical double-layer capacitance and pseudocapacitance. Consequently, the NS-HPLC-K supercapacitor electrode delivered a superior gravimetric capacitance of 393 F/g at 0.5 A/g. Furthermore, the assembled coin-type supercapacitor showed good energy-power characteristics and cycling stability. This work provides a novel idea for designing eco-friendly porous carbons for use in advanced supercapacitors.

Modification of micro-crystalline graphite and carbon black by acetone, toluene, and phenol

The chemical interactions of two types of graphite and two types of carbon black (CB) with acetone, toluene, and phenol were studied in order to evaluate the influence of chemical treatment on the structure and morphology of the carbon phases. The experimental treatment of carbon phases was carried out at room temperature for 1 hour. The chemical and phase composition were studied by x-ray photoelectron (XP) and Raman spectroscopies, while the morphology and structure were determined by powder x-ray diffraction, as well as transmission electron microscopy techniques. To shed light on the most probable explanation of the observed results, we performed simulations and calculations of the binding energies of acetone, toluene, and phenol with model carbon phases: a perfect graphene sheet and a defective graphene sheet containing various structural defects (vacancies as well as zigzag and armchair edges). Simulations show that all non-covalent and most covalent coupling reactions are exothermic, with acetone coupling having the higher calorimetric effect. Based on the results of the simulations and the XP spectroscopy measurements, the probable reactions taking place during the respective treatments are outlined. The conducted studies (both theoretical and experimental) show that the treatment of graphite powders and CB with acetone, toluene, or phenol can be used as a preliminary stage of their modification and/or functionalization, including their conversion into graphene-like (defective graphene, reduced graphene oxide, and/or graphene oxide) phases. For example, the treatment of SPHERON 5000 with acetone significantly facilitates their subsequent modification with laser radiation to graphene-like phases.

Recent Advances in the Spintronic Application of Carbon-Based Nanomaterials

The term "carbon-based spintronics" mostly refers to the spin applications in carbon materials such as graphene, fullerene, carbon nitride, and carbon nanotubes. Carbon-based spintronics and their devices have undergone extraordinary development recently. The causes of spin relaxation and the characteristics of spin transport in carbon materials, namely for graphene and carbon nanotubes, have been the subject of several theoretical and experimental studies. This article gives a summary of the present state of research and technological advancements for spintronic applications in carbon-based materials. We discuss the benefits and challenges of several spin-enabled, carbon-based applications. The advantages include the fact that they are significantly less volatile than charge-based electronics. The challenge is in being able to scale up to mass production.

Advances in high-voltage supercapacitors for energy storage systems: materials and electrolyte tailoring to implementation

To achieve a zero-carbon-emission society, it is essential to increase the use of clean and renewable energy. Yet, renewable energy resources present constraints in terms of geographical locations and limited time intervals for energy generation. Therefore, there is a surging demand for developing high-performance energy storage systems (ESSs) to effectively store the energy during the peak time and use the energy during the trough period. To this end, supercapacitors hold great promise as short-term ESSs for rapid power recovery or frequency regulation to improve the quality and reliability of power supply. In particular, the electrical double layer capacitor (EDLC) which offers long and stable cycle retention, high power densities, and fast charge/discharge characteristics with a moderate operating voltage window, is a suitable candidate. Yet, for implementation of the EDLC in ESSs, further research effort is required in terms of increasing the operating voltage and energy densities while maintaining the long-term cycle stability and power densities which are desirable aspects for ESS operation. Here, we examine the advances in EDLC research to achieve a high operating voltage window along with high energy densities, covering from materials and electrolytes to long-term device perspectives for next-generation supercapacitor-based ESSs.

Biomass Nanoarchitectonics for Supercapacitor Applications

Nanoarchitectonics integrates nanotechnology with numerous scientific disciplines to create innovative and novel functional materials from nano-units (atoms, molecules, and nanomaterials). The objective of nanoarchitectonics concept is to develop functional materials and systems with rationally architected functional units. This paper explores the progress and potential of this field using biomass nanoarchitectonics for supercapacitor applications as examples of energetic materials and devices. Strategic design of nanoporous carbons that exhibit ultra-high surface area and hierarchically pore architectures comprising micro- and mesopore structure and controlled pore size distributions are of great significance in energy-related applications, including in high-performance supercapacitors, lithium-ion batteries, and fuel cells. Agricultural wastes or natural biomass are lignocellulosic materials and are excellent carbon sources for the preparation of hierarchically porous carbons with an ultra-high surface area that are attractive materials in high-performance supercapacitor applications due to high electrical and ion conduction, extreme porosity, and exceptional chemical and thermal stability. In this review, we will focus on the latest advancements in the fabrication of hierarchical porous carbon materials from different biomass by chemical activation method. Particularly, the importance of biomass-derived ultra-high surface area porous carbons, hierarchical architectures with interconnected pores in high-energy storage, and high-performance supercapacitors applications will be discussed. Finally, the current challenges and outlook for the further improvement of carbon materials derived from biomass or agricultural wastes in the advancements of supercapacitor devices will be discussed.

Emerging Modification Technologies of Lignin-based Activated Carbon toward Advanced Applications

Lignin-based activated carbon (LAC) is a promising high-quality functional material due to high surface area, abundant porous structure, and various functional groups. Modification is the most important step to functionalize LAC by altering its porous and chemical properties. This Review summarizes the state-of-the-art modification technologies of LAC toward advanced applications. Promising modification approaches are reviewed to display their effects on the preparation of LAC. The multiscale changes in the porosity and the surface chemistry of LAC are fully discussed. Advanced applications are then introduced to show the potential of LAC for supercapacitor electrode, catalyst support, hydrogen storage, and carbon dioxide capture. Finally, the mechanistic structure-function relationships of LAC are elaborated. These results highlight that modification technologies play a special role in altering the properties and defining the functionalities of LAC, which could be a promising porous carbon material toward industrial applications.

The Composite-Template Method to Construct Hierarchical Carbon Nanocages for Supercapacitors with Ultrahigh Energy and Power Densities

3D hierarchical carbon nanocages (hCNC) are becoming new platforms for advanced energy storage and conversion due to their unique structural characteristics, especially the combination of multiscale pore structure with high conductivity of sp² carbon frameworks, which can promote the mass/charge synergetic transfer in various electrochemical processes. Herein, the MgO@ZnO composite-template method is developed to construct hCNC and nitrogen-doped hCNC (hNCNC), which integrates the advantages of the in situ MgO template method and ZnO self-sacrificing template method. The hierarchical MgO template provides the scaffold for depositing carbon nanocages, while the self-sacrificing ZnO template helps create abundant micropores while promoting the graphitization degree, so that the microstructures of the products are effectively regulated. The optimized hCNC and hNCNC have an increased specific surface area and conductivity, which can further boost the mass/charge synergetic transfer. As the electrode materials of supercapacitors, the optimal hCNC(hNCNC) exhibits a high specific capacitance of 281(348) F g^-1 in KOH and 276(297) F g^-1 in EMIMBF₄ electrolytes at 1 A g^-1 . The ultrahigh energy and power densities are realized, accompanied by a high-rate capability and long cycling stability. The record-high energy densities of 141.8-71.4 Wh kg^-1 are achieved in EMIMBF₄ at power densities of 10.0-250.4 kW kg^-1 .

Graphene: A Path-Breaking Discovery for Energy Storage and Sustainability

The global energy situation requires the efficient use of resources and the development of new materials and processes for meeting current energy demand. Traditional materials have been explored to large extent for use in energy saving and storage devices. Graphene, being a path-breaking discovery of the present era, has become one of the most-researched materials due to its fascinating properties, such as high tensile strength, half-integer quantum Hall effect and excellent electrical/thermal conductivity. This paper presents an in-depth review on the exploration of deploying diverse derivatives and morphologies of graphene in various energy-saving and environmentally friendly applications. Use of graphene in lubricants has resulted in improvements to anti-wear characteristics and reduced frictional losses. This comprehensive survey facilitates the researchers in selecting the appropriate graphene derivative(s) and their compatibility with various materials to fabricate high-performance composites for usage in solar cells, fuel cells, supercapacitor applications, rechargeable batteries and automotive sectors.

Nitrogen-rich accordion-like lignin porous carbon via confined self-assembly template and in-situ mild activation strategy for high-performance supercapacitors

Nitrogen-doped porous carbons have emerged as promising electrode materials for supercapacitors. However, the precise control of carbon geometry and the effective doping method remain challenging. Herein, a confined self-assembly template and in-situ mild activation strategy is proposed to prepare cubic lignin composite precursor, followed by co-pyrolysis with melamine at a high temperature for nitrogen-doped hierarchical porous carbons (N-HPLCs). The zinc oxalate template has the coupling effect of confinement and mild activation during carbonization, which not only prevents the restacking of the carbon matrix but also generates zinc cyanamide intermediate to avoid excessive loss of nitrogen species. The optimized N-HPLCs exhibit an accordion-like framework with interconnected porous sheets, ultrahigh edge-nitrogen doping level (up to 12.20 at.%), and a total nitrogen doping level of 14.09 at.%. Consequently, it shows a high gravimetric capacitance of 354 F/g at 0.2 A/g, an extraordinary surface-area-normalized capacitance of 82.1 ± 0.2 μF/cm², and good rate capability in supercapacitor applications. Moreover, the fabricated coin-type symmetric supercapacitor displays a high energy density of 12.9 Wh/kg at 161.9 W/kg and superior cycling stability with a 99.5% capacitance retention after 16,000 cycles at 2.0 A/g. This work offers a novel method for preparing nitrogen-enriched lignin-derived carbon for high-performance supercapacitors.

Recent progress in electrospun nanomaterials for wearables

Wearables have garnered significant attention in recent years not only as consumer electronics for entertainment, communications, and commerce but also for real-time continuous health monitoring. This has been spurred by advances in flexible sensors, transistors, energy storage, and harvesting devices to replace the traditional, bulky, and rigid electronic devices. However, engineering smart wearables that can seamlessly integrate with the human body is a daunting task. Some of the key material attributes that are challenging to meet are skin conformability, breathability, and biocompatibility while providing tunability of its mechanical, electrical, and chemical properties. Electrospinning has emerged as a versatile platform that can potentially address these challenges by fabricating nanofibers with tunable properties from a polymer base. In this article, we review advances in wearable electronic devices and systems that are developed using electrospinning. We cover various applications in multiple fields including healthcare, biomedicine, and energy. We review the ability to tune the electrical, physiochemical, and mechanical properties of the nanofibers underlying these applications and illustrate strategies that enable integration of these nanofibers with human skin.

Synthesis of Needle-like Nanostructure Composite Electrode of Co3O4/rGO/NF for High-Performance Symmetric Supercapacitor

In this work, a hierarchical electrode structure of cobaltosic oxide (Co3O4) growing on a reduced graphene oxide (rGO)-covered nickel foam (NF) substrate (named Co3O4/rGO/NF) is fabricated by a facile hydrothermal and subsequent annealing process. Thousands of nanoneedle units uniformly arranged on the surface of the rGO sheet stimulate the evident increase in the specific surface area and thus produce more active sites. Because of the special hierarchical structure, the Co3O4/rGO/NF electrode shows a high specific capacitance of 1400 F g−1 at 1 A g−1 and retains 58% capacitance even when the current density increases to 30 A g−1. In addition, a symmetric supercapacitor based on the Co3O4/rGO/NF electrode is assembled, exhibiting high specific capacitance of 311 F g−1 at 1 A g−1, as well as remarkable power density and energy density (40.67 Wh kg−1 at 12 kW kg−1). The device also demonstrates a great cycling performance after 10,000 cycles under the current density of 10 A g−1, acquiring 89.69% capacitance retention of the initial state. The accessible synthetic method and superior electrochemical performance of the Co3O4/rGO/NF composite electrode implicate its extensive application prospects in terms of new energy storage.

Core-shell CuO@NiCoMn-LDH supported by copper foam for high-performance supercapacitors

The core-shell structured CuO@NiCoMn-LDH electrode was synthesized by wet chemistry, calcination, and electrodeposition. The synergistic effect of CuO nanowires and NiCoMn-LDH nanosheets has a significant enhancement effect on electrode materials. At the same time, the Mn content plays a decisive role in regulating and optimizing the morphology and electrochemical performance of electrode materials. The optimized CuO@NiCoMn-LDH, a binder-free electrode, exhibits excellent electrochemical performance. It displays a high specific capacity of 2.66 mA h cm^-2 (20.7 F cm^-2, 336.71 mA h g^-1) at 10 mA cm^-2 and satisfactory cycling stability (under a current density of 30 mA cm^-2, after 3000 cycles, the capacity retention rate is 94.82%). In addition, an asymmetric supercapacitor (ASC) is built using the CuO@NiCoMn-LDH electrode as the positive electrode and Fe₃O₄@C/CuO electrode as the negative electrode to demonstrate its practical applicability in energy storage devices. At a power density of 4.79 mW cm^-2, the ASC device can achieve a maximum energy density of 2.67 mW h cm^-2. Two ASC devices are used as the power source of the light emitting diode (LED), which can emit light continuously for 15 minutes, showing great potential in energy storage device applications.