Site-directed mutagenesis of a thermostable alpha-amylase from Bacillus stearothermophilus: putative role of three conserved residues

Conserved residues at the family and subfamily levels determine enzyme activity and substrate binding in glycoside hydrolase family 13

Site-directed mutagenesis is a valuable strategy for modifying enzymes, but the lack of understanding of conserved residues regulating glycosidase function hinders enzyme design. We analyzed 1662 enzyme sequences to identify conserved amino acids in maltohexaose-forming amylase at both family and subfamily levels. Several conserved residues at the family level (G37, P45, R52, Y57, D101, V103, H106, G230, R232, D234, E264, H330, D331, and G360) were found, mutations of which resulted in reduced enzyme activity or inactivation. At the subfamily level, several conserved residues (L65, E67, F68, D111, E114, R126, R147, F154, W156, F161, G163, D165, W218H, V342, W345, and F346) were identified, which primarily facilitate substrate binding in the enzyme's active site, as shown by molecular dynamics and kinetic assays. Our findings provide critical insights into conserved residues essential for catalysis and can inform targeted enzyme design in protein engineering.

Improving thermostability of Bacillus amyloliquefaciens alpha-amylase by multipoint mutations

The medium-temperature alpha-amylase of Bacillus amyloliquefaciens is widely used in the food and washing process. Enhancing the thermostability of alpha-amylases and investigating the mechanism of stability are important for enzyme industry development. The optimal temperature and pH of the wild-type BAA and mutant MuBAA (D28E/V118A/S187D/K370 N) were all 60 °C and 6.0, respectively. The mutant MuBAA showed better thermostability at 50 °C and 60 °C, with a specific activity of 206.61 U/mg, which was 99.1% greater than that of the wild-type. By analyzing predicted structures, the improving thermostability of the mutant MuBAA was mainly related to enhanced stabilization of a loop region in domain B via more calcium-binding sites and intramolecular interactions around Asp187. Furthermore, additional intramolecular interactions around sites 28 and 370 in domain A were also beneficial for improving thermostability. Additionally, the decrease of steric hindrance at the active cavity increased the specific activity of the mutant MuBAA. Improving the thermostability of BAA has theoretical reference values for the modification of alpha-amylases.

Quantitative Acetylome Analysis of Soft Wheat Seeds during Artificial Ageing

Lysine acetylation (Kac) is a protein post-translational modification (PTM) widely found in plants that plays vital roles in metabolic pathways. Although seed germination and development are regulated by Kac, its potential function in seed ageing remains to be investigated. Our preliminary study demonstrated that Kac levels were altered during wheat seed artificial ageing. However, its specific role in this process still needs to be elucidated. Here, we performed quantitative acetylation proteomics analysis of soft wheat seeds with different germination rates during artificial ageing. A total of 175 acetylation proteins and 255 acetylation modification sites were remarkably changed. The differentially acetylated proteins were enriched in metabolism; response to harsh intracellular environment, such as ROS; protein storage and processing. Notably, expression, point mutation to mimic Kac by K to Q mutation at K80 and K138, protein purification and enzyme activity detection revealed that the Kac of ROS-scavenging glutathione transferase attenuated its activity, indicating that the defense ability of wheat seeds to stress gradually diminished, and the ageing process was inevitable. Collectively, our data provide a basis for further understanding the roles of Kac in seed ageing and might aid in the development of new techniques to prolong seed viability and food quality.

Structural and functional adaptation in extremophilic microbial α-amylases

Maintaining stable native conformation of a protein under a given ecological condition is the prerequisite for survival of organisms. Extremophilic bacteria and archaea have evolved to adapt under extreme conditions of temperature, pH, salt, and pressure. Molecular adaptations of proteins under these conditions are essential for their survival. These organisms have the capability to maintain stable, native conformations of proteins under extreme conditions. The enzymes produced by the extremophiles are also known as extremozyme, which are used in several industries. Stability and functionality of extremozymes under varying temperature, pH, and solvent conditions are the most desirable requirement of industry. α-Amylase is one of the most important enzymes used in food, pharmaceutical, textile, and detergent industries. This enzyme is produced by diverse microorganisms including various extremophiles. Therefore, understanding its stability is important from fundamental as well as an applied point of view. Each class of extremophiles has a distinctive set of dominant non-covalent interactions which are important for their stability. Static information obtained by comparative analysis of amino acid sequence and atomic resolution structure provides information on the prevalence of particular amino acids or a group of non-covalent interactions. Protein folding studies give the information about thermodynamic and kinetic stability in order to understand dynamic aspect of molecular adaptations. In this review, we have summarized information on amino acid sequence, structure, stability, and adaptability of α-amylases from different classes of extremophiles.

Deep Eutectic Solvents as New Reaction Media to Produce Alkyl-Glycosides Using Alpha-Amylase from Thermotoga maritima

Deep Eutectic Solvents (DES) were investigated as new reaction media for the synthesis of alkyl glycosides catalyzed by the thermostable α-amylase from Thermotoga maritima Amy A. The enzyme was almost completely deactivated when assayed in a series of pure DES, but as cosolvents, DES containing alcohols, sugars, and amides as hydrogen-bond donors (HBD) performed best. A choline chloride:urea based DES was further characterized for the alcoholysis reaction using methanol as a nucleophile. As a cosolvent, this DES increased the hydrolytic and alcoholytic activity of the enzyme at low methanol concentrations, even when both activities drastically dropped when methanol concentration was increased. To explain this phenomenon, variable-temperature, circular dichroism characterization of the protein was conducted, finding that above 60 °C, Amy A underwent large conformational changes not observed in aqueous medium. Thus, 60 °C was set as the temperature limit to carry out alcoholysis reactions. Higher DES contents at this temperature had a detrimental but differential effect on hydrolysis and alcoholysis reactions, thus increasing the alcoholyisis/hydrolysis ratio. To the best of our knowledge, this is the first report on the effect of DES and temperature on an enzyme in which structural studies made it possible to establish the temperature limit for a thermostable enzyme in DES.

Crystal structure of a maltooligosaccharide-forming amylase from Bacillus stearothermophilus STB04

To better understand structure-function relationships, an X-ray crystal structure of the maltooligosaccharide-forming amylase from Bacillus stearothermophilus STB04 (Bst-MFA) with bound acarbose has been determined at 2.2 Å. The structure revealed a classical three-domain fold stabilized by four calcium ions, in which CaI-CaIII form an unprecedented linear metal triad in the interior of domain B. Catalytic residues are deduced to be two aspartic acids and one glutamic acid (Asp234, Glu264, Asp331), and the acarbose is bound to surrounding amino acid residues, mainly through extensive hydrogen bonds. Furthermore, analysis of the structure indicates the existence of at least 8 subsites in Bst-MFA, six glycone sites (-6, -5, -4, -3, -2, -1) and two aglycone sites (+1, +2). Subsite +3 remains to be further explored. Sugar-binding subsites contribute to further presentation of the oligosaccharide-binding mode, which explains the product specificity of Bst-MFA to some extent. In addition, we propose a mechanism by which maltooligosaccharide-forming amylases produce particular maltooligosaccharide products, a result different from that seen with typical α-amylases. Finally, the three-dimensional structure of Bst-MFA complexed with acarbose provides the basis for further studies, designed to increase product specificity.

Inhibition of α-amylase Activity by Zn2+: Insights from Spectroscopy and Molecular Dynamics Simulations

Background:

Inhibition of α-amylase activity is an important strategy in the treatment of diabetes mellitus. An important treatment for diabetes mellitus is to reduce the digestion of carbohydrates and blood glucose concentrations. Inhibiting the activity of carbohydrate-degrading enzymes such as α-amylase and glucosidase significantly decreases the blood glucose level. Most inhibitors of α-amylase have serious adverse effects, and the α-amylase inactivation mechanisms for the design of safer inhibitors are yet to be revealed.

Objective:

In this study, we focused on the inhibitory effect of Zn2+ on the structure and dynamic characteristics of α-amylase from Anoxybacillus sp. GXS-BL (AGXA), which shares the same catalytic residues and similar structures as human pancreatic and salivary α-amylase (HPA and HSA, respectively).

Methods:

Circular dichroism (CD) spectra of the protein (AGXA) in the absence and presence of Zn2+ were recorded on a Chirascan instrument. The content of different secondary structures of AGXA in the absence and presence of Zn2+ was analyzed using the online SELCON3 program. An AGXA amino acid sequence similarity search was performed on the BLAST online server to find the most similar protein sequence to use as a template for homology modeling. The pocket volume measurer (POVME) program 3.0 was applied to calculate the active site pocket shape and volume, and molecular dynamics simulations were performed with the Amber14 software package.

Results:

According to circular dichroism experiments, upon Zn2+ binding, the protein secondary structure changed obviously, with the α-helix content decreasing and β-sheet, β-turn and randomcoil content increasing. The structural model of AGXA showed that His217 was near the active site pocket and that Phe178 was at the outer rim of the pocket. Based on the molecular dynamics trajectories, in the free AGXA model, the dihedral angle of C-CA-CB-CG displayed both acute and planar orientations, which corresponded to the open and closed states of the active site pocket, respectively. In the AGXA-Zn model, the dihedral angle of C-CA-CB-CG only showed the planar orientation. As Zn2+ was introduced, the metal center formed a coordination interaction with H217, a cation-π interaction with W244, a coordination interaction with E242 and a cation-π interaction with F178, which prevented F178 from easily rotating to the open state and inhibited the activity of the enzyme.

Conclusion:

This research may have uncovered a subtle mechanism for inhibiting the activity of α-amylase with transition metal ions, and this finding will help to design more potent and specific inhibitors of α-amylases.

Purification of an alpha amylase from Aspergillus flavus NSH9 and molecular characterization of its nucleotide gene sequence

In this study, an alpha-amylase enzyme from a locally isolated Aspergillus flavus NSH9 was purified and characterized. The extracellular α-amylase was purified by ammonium sulfate precipitation and anion-exchange chromatography at a final yield of 2.55-fold and recovery of 11.73%. The molecular mass of the purified α-amylase was estimated to be 54 kDa using SDS-PAGE and the enzyme exhibited optimal catalytic activity at pH 5.0 and temperature of 50 °C. The enzyme was also thermally stable at 50 °C, with 87% residual activity after 60 min. As a metalloenzymes containing calcium, the purified α-amylase showed significantly increased enzyme activity in the presence of Ca²⁺ ions. Further gene isolation and characterization shows that the α-amylase gene of A. flavus NSH9 contained eight introns and an open reading frame that encodes for 499 amino acids with the first 21 amino acids presumed to be a signal peptide. Analysis of the deduced peptide sequence showed the presence of three conserved catalytic residues of α-amylase, two Ca²⁺-binding sites, seven conserved peptide sequences, and several other properties that indicates the protein belongs to glycosyl hydrolase family 13 capable of acting on α-1,4-bonds only. Based on sequence similarity, the deduced peptide sequence of A. flavus NSH9 α-amylase was also found to carry two potential surface/secondary-binding site (SBS) residues (Trp 237 and Tyr 409) that might be playing crucial roles in both the enzyme activity and also the binding of starch granules.

PON-P and PON-P2 predictor performance in CAGI challenges: Lessons learned

Computational tools are widely used for ranking and prioritizing variants for characterizing their disease relevance. Since numerous tools have been developed, they have to be properly assessed before being applied. Critical Assessment of Genome Interpretation (CAGI) experiments have significantly contributed toward the assessment of prediction methods for various tasks. Within and outside the CAGI, we have addressed several questions that facilitate development and assessment of variation interpretation tools. These areas include collection and distribution of benchmark datasets, their use for systematic large-scale method assessment, and the development of guidelines for reporting methods and their performance. For us, CAGI has provided a chance to experiment with new ideas, test the application areas of our methods, and network with other prediction method developers. In this article, we discuss our experiences and lessons learned from the various CAGI challenges. We describe our approaches, their performance, and impact of CAGI on our research. Finally, we discuss some of the possibilities that CAGI experiments have opened up and make some suggestions for future experiments.

LaaA, a novel high-active alkalophilic alpha-amylase from deep-sea bacterium Luteimonas abyssi XH031(T)

Alpha-amylase is a kind of broadly used industrial enzymes, most of which have been exploited from terrestrial organism. Comparatively, alpha-amylase from marine environment was largely undeveloped. In this study, a novel alkalophilic alpha-amylase with high activity, Luteimonas abyssi alpha-amylase (LaaA), was cloned from deep-sea bacterium L. abyssi XH031(T) and expressed in Escherichia coli BL21. The gene has a length of 1428bp and encodes 475 amino acids with a 35-residue signal peptide. The specific activity of LaaA reached 8881U/mg at the optimum pH 9.0, which is obvious higher than other reported alpha-amylase. This enzyme can remain active at pH levels ranging from 6.0 to 11.0 and temperatures below 45°C, retaining high activity even at low temperatures (almost 38% residual activity at 10°C). In addition, 1mM Na(+), K(+), and Mn(2+) enhanced the activity of LaaA. To investigate the function of potential active sites, R227G, D229K, E256Q/H, H327V and D328V mutants were generated, and the results suggested that Arg227, Asp229, Glu256 and Asp328 were total conserved and essential for the activity of alpha-amylase LaaA. This study shows that the alpha-amylase LaaA is an alkali-tolerant and high-active amylase with strong potential for use in detergent industry.

Extraction, Purification and Characterization of Thermostable, Alkaline Tolerant α-Amylase from Bacillus cereus

Thermostable alkaline α-amylase producing bacterium Bacilluscereus strain isolated from Cuddalore harbour waters grew maximally in both shake flask and fermentor, and produced α-amylase at 35°C, pH 7.5 and 1.0% of substrate concentrations. α-Amylase activity was maximum at 65°C, pH 8.0, 89% of its activity was sustained even at pH 11.0. Added with MnCl(2,) α-amylase activity showed 4% increase but it was inhibited by EDTA. The molecular weight of the purified α-amylase is 42 kDa.

Structure of Bacillus amyloliquefaciens alpha-amylase at high resolution: implications for thermal stability

The crystal structure of Bacillus amyloliquefaciens alpha-amylase (BAA) at 1.4 A resolution revealed ambiguities in the thermal adaptation of homologous proteins in this family. The final model of BAA is composed of two molecules in a back-to-back orientation, which is likely to be a consequence of crystal packing. Despite a high degree of identity, comparison of the structure of BAA with those of other liquefying-type alpha-amylases indicated moderate discrepancies at the secondary-structural level. Moreover, a domain-displacement survey using anisotropic B-factor and domain-motion analyses implied a significant contribution of domain B to the total flexibility of BAA, while visual inspection of the structure superimposed with that of B. licheniformis alpha-amylase (BLA) indicated higher flexibility of the latter in the central domain A. Therefore, it is suggested that domain B may play an important role in liquefying alpha-amylases, as its rigidity offers a substantial improvement in thermostability in BLA compared with BAA.

Enhancement of the alcoholytic activity of alpha-amylase AmyA from Thermotoga maritima MSB8 (DSM 3109) by site-directed mutagenesis

AmyA, an alpha-amylase from the hyperthermophilic bacterium Thermotoga maritima, is able to hydrolyze internal alpha-1,4-glycosidic bonds in various alpha-glucans at 85 degrees C as the optimal temperature. Like other glycoside hydrolases, AmyA also catalyzes transglycosylation reactions, particularly when oligosaccharides are used as substrates. It was found that when methanol or butanol was used as the nucleophile instead of water, AmyA was able to catalyze alcoholysis reactions. This capability has been evaluated in the past for some alpha-amylases, with the finding that only the saccharifying fungal amylases from Aspergillus niger and from Aspergillus oryzae present measurable alcoholysis activity (R. I. Santamaria, G. Del Rio, G. Saab, M. E. Rodriguez, X. Soberon, and A. Lopez, FEBS Lett. 452:346-350, 1999). In the present work, we found that AmyA generates larger quantities of alkyl glycosides than any amylase reported so far. In order to increase the alcoholytic activity observed in AmyA, several residues were identified and mutated based on previous analogous positions in amylases, defining the polarity and geometry of the active site. Replacement of residue His222 by glutamine generated an increase in the alkyl glucoside yield as a consequence of a higher alcoholysis/hydrolysis ratio. The same change in specificity was observed for the mutants H222E and H222D, but instability of these mutants toward alcohols decreased the yield of alkyl glucoside.

The unique glycoside hydrolase family 77 amylomaltase from Borrelia burgdorferi with only catalytic triad conserved

Glycoside hydrolase family 77 (GH77) contains prokaryotic amylomaltases and plant-disproportionating enzymes (both possessing the 4-alpha-glucanotransferase activity; EC 2.4.1.25). Together with GH13 and GH70, it forms the clan GH-H, known as the alpha-amylase family. Bioinformatics analysis revealed that the putative GH77 amylomaltase (MalQ) from the Lyme disease spirochaete Borrelia burgdorferi genome (BB0166) contains several amino acid substitutions in the positions that are important and conserved in all GH77 amylomaltases. The most important mutation concerned the functionally important arginine positioned two residues before the catalytic nucleophile that is replaced by lysine in B. burgdorferi MalQ. Similar remarkable substitutions were found in two other putative GH77 amylomaltases from related borreliae. In order to confirm the exclusive sequence features and to verify the eventual enzymatic activity, the malQ gene from B. burgdorferi was amplified using PCR. A c. 1.5-kb amplified DNA fragment was sequenced, cloned and expressed in Escherichia coli, and the resulting recombinant protein was preliminarily characterized for its activity towards glucose (G1) and a series of malto-oligosaccharides (G2-G7). This study confirmed that the remarkable substitution of the arginine really exists and the GH77 MalQ protein from B. burgdorferi is a functional amylomaltase because it is able to hydrolyse the malto-oligosaccharides as well as to form their longer transglycosylation products.

The concept of the alpha-amylase family: structural similarity and common catalytic mechanism

This review reconsiders the concept of the alpha-amylase family in the light of the recent wealth of information on the structures, the catalytic mechanisms, and the classification of amylases. We proposed a general concept for an enzyme family, the alpha-amylase family including most of the amylases and related enzymes in 1992, based on the structural similarity and the common catalytic mechanisms. The study on neopullulanase was the key to open the door for the formulation of the concept. We discovered a new enzyme, neopullulanase, and proved that the enzyme catalyzes both hydrolysis and transglycosylation at alpha-1,4- and alpha-1,6-glucosidic linkages by one active center. Results from a series of experiments using neopullulanase indicated that the four reactions mentioned above could be catalyzed in the same mechanism. Progress in X-ray crystallographic analysis has allowed researchers to observe the structural similarities among alpha-amylases, cyclodextrin glucanotransferases, and an isoamylase. The primary structural analyses and the secondary structural predictions also suggest a close relationship among enzymes with three-dimensional structures which catalyze one of the four reactions. They possess a catalytic (beta/alpha)8-barrel as observed in the crystal structure of alpha-amylases, cyclodextrin glucanotransferases, and an isoamylase. Two crucial points, the common catalytic mechanisms and the structural similarities among the enzymes which catalyze the four reactions, led us to propose the concept of the alpha-amylase family. We would like to point out the significance and problems of the sequence-based classification of glycosyl hydrolases. The possible catalytic mechanism of the alpha-amylase family enzyme is also described for the rational design of tailor-made artificial enzymes.

Enzymatic analysis of an amylolytic enzyme from the hyperthermophilic archaeon Pyrococcus furiosus reveals its novel catalytic properties as both an alpha-amylase and a cyclodextrin-hydrolyzing enzyme

Genomic analysis of the hyperthermophilic archaeon Pyrococcus furiosus revealed the presence of an open reading frame (ORF PF1939) similar to the enzymes in glycoside hydrolase family 13. This amylolytic enzyme, designated PFTA (Pyrococcus furiosus thermostable amylase), was cloned and expressed in Escherichia coli. The recombinant PFTA was extremely thermostable, with an optimum temperature of 90 degrees C. The substrate specificity of PFTA suggests that it possesses characteristics of both alpha-amylase and cyclodextrin-hydrolyzing enzyme. Like typical alpha-amylases, PFTA hydrolyzed maltooligosaccharides and starch to produce mainly maltotriose and maltotetraose. However, it could also attack and degrade pullulan and beta-cyclodextrin, which are resistant to alpha-amylase, to primarily produce panose and maltoheptaose, respectively. Furthermore, acarbose, a potent alpha-amylase inhibitor, was drastically degraded by PFTA, as is typical of cyclodextrin-hydrolyzing enzymes. These results confirm that PFTA possesses novel catalytic properties characteristic of both alpha-amylase and cyclodextrin-hydrolyzing enzyme.

The fully conserved Asp residue in conserved sequence region I of the alpha-amylase family is crucial for the catalytic site architecture and activity

The alpha-amylase family is a large group of starch processing enzymes [Svensson, B. (1994) Plant Mol. Biol. 25, 141-157]. It is characterized by four short sequence motifs that contain the seven fully conserved amino acid residues in this family: two catalytic carboxylic acid residues and four substrate binding residues. The seventh conserved residue (Asp135) has no direct interactions with either substrates or products, but it is hydrogen-bonded to Arg227, which does bind the substrate in the catalytic site. Using cyclodextrin glycosyltransferase as an example, this paper provides for the first time definite biochemical and structural evidence that Asp135 is required for the proper conformation of several catalytic site residues and therefore for activity.

Purification and sequence analysis of the atypical maltohexaose-forming alpha-amylase of the B. stearothermophilus US100

The maltohexaose-forming alpha-amylase, of B. stearothermophilus US100, was purified to homogeneity by a combination of osmotic shock, starch adsorption and anion exchange chromatography. This enzyme has a relative molecular mass of 59 kDa. The analysis of the nucleotide sequence, of the corresponding gene, allowed the identification of a single open reading frame encoding a 549 amino acid protein, exhibiting a large homology to the other B. stearothermophilus alpha-amylases. This homology reaches a maximum with those of DY-5 and DN1792 strains with respectively 3 and 4 aa different over 549. The relatively small differences, between Amy US100 and that of DN1792 strain, take in more importance since we have demonstrated that these enzymes differ essentially by their starch hydrolysis pattern.

Protein engineering of bacterial alpha-amylases

alpha-Amylases constitute a very diverse family of glycosyl hydrolases that cleave alpha1-->4 linkages in amylose and related polymers. Recent structural and mutagenic studies of archeael, mammalian and bacterial alpha-amylases have resulted in a wealth of information on the catalytic mechanism and on the structural features of this enzyme class. Because of their high thermo-stability, the Bacillus alpha-amylases have found widespread use in industrial processes, and much attention has been devoted to optimising these enzymes for the very harsh conditions encountered there. Stability has been a major area of focus in this respect, and several remarkably stable bacterial alpha-amylases have been produced by bioengineering techniques. Protein engineering studies of pH-activity profiles and of substrate specificities have also been initiated, although without much success. In the coming years it is likely, however, that the focus of alpha-amylase engineering will shift from engineering stability to these new areas.

Cloning and sequencing of the maltohexaose-producing amylase gene of Klebsiella pneumoniae

The molecular characterization of the maltohexaose-producing amylase gene of Klebsiella pneumoniae revealed an open reading frame in which 2,031 base pairs encode a protein of 677 amino acids with a calculated molecular weight of 75,921. The amylase gene had high similarities of 73.6% in DNA sequence and 79.3% in deduced amino acid sequence with the periplasmic alpha-amylase MalS gene of Escherichia coli.

Introducing transglycosylation activity in a liquefying alpha-amylase

By mutating Ala-289 by Phe or Tyr in the Bacillus stearothermophilus alpha-amylase, we induced this enzyme to perform alcoholytic reactions, a function not present in the wild-type enzyme. This residue was selected from homology analysis with neopullulanase, where the residue has been implicated in the control of transglycosylation [Kuriki et al. (1996) J. Biol. Chem. 271, 17321-173291. We made some inferences about the importance of electrostatic and geometrical modifications in the active site environment of the amylase to explain the behavior of the modified enzyme.

Alcoholysis reactions from starch with alpha-amylases

The ability of alpha-amylases from different sources to carry out reactions of alcoholysis was studied using methanol as substrate. It was found that while the enzymes from Aspergillus niger and Aspergillus oryzae, two well-studied saccharifying amylases, are capable of alcoholysis reactions, the classical bacterial liquefying alpha-amylases from Bacillus licheniformis and Bacillus stearothermophilus are not. The effect of starch and methanol concentration, temperature and pH on the synthesis of glucosides with alpha-amylase from A. niger was studied. Although methanol may inactivate alpha-amylase, a 90% substrate relative conversion can be obtained in 20% methanol at a high starch concentration (15% w/v) due to a stabilizing effect of starch on the enzyme. As the products of alcoholysis are a series of methyl-oligosaccharides, from methyl-glucoside to methyl-hexomaltoside, alcoholysis was indirectly quantified by high performance liquid chromatography analysis of the total methyl-glucoside produced after the addition of glucoamylase to the alpha-amylase reaction products. More alcoholysis was obtained from intact soluble starch than with maltodextrins or pre-hydrolyzed starch. The biotechnological implications of using starch as substrate for the production of alkyl-glucosides is analyzed in the context of these results.

Arginine residue 384 at the catalytic center is important for branching enzyme II from maize endosperm

Branching enzyme (BE) belongs to the amylolytic family which contains four highly conserved regions. These regions are proposed to play an important role in catalysis as they are thought to be necessary for catalysis and/or binding the substrate. Only one arginine residue was found to be conserved in a catalytic center at the same position in all known sequences of BEs from various species as well as in the alpha-amylase enzyme family. In mBEII, a conserved Arg residue 384 is in catalytic region 2. We have used site-directed mutagenesis of the Arg-384 residue in order to study its possible role in BE. Previous chemical modification studies (H. Cao and J. Preiss, 1996, J. Prot. Chem. 15, 291-304) suggest that it may play a role in substrate binding. Replacement of Arg-384 by Ala, Ser, Gln, and Glu in the active site caused almost total inactivation. However, a conservative mutation of the conserved Arg-384 by Lys resulted in some residual activity, approximately 5% of the wild-type enzyme. The kinetics of the purified mutant R384K enzyme were investigated and no large effect on the Km of the substrate amylose for BE was observed. Thus, these results suggest that conserved Arg residue 384 in mBEII plays an important role in the catalytic function of BEs but may not be directly involved in substrate binding.

Improved thermostability of a Bacillus alpha-amylase by deletion of an arginine-glycine residue is caused by enhanced calcium binding

alpha-Amylase from alkaliphilic Bacillus KSM-1378 (LAMY) is a novel semi-alkaline enzyme which has a high specific activity, a value 5-fold higher than that of a Bacillus licheniformis enzyme at alkaline pH. Thermostability of this enzyme could be improved by deletion of the Arg181-Gly182 residue by means of site-directed mutagenesis. The wild-type and engineered LAMYs were very similar with respect to specific activity, pH-activity curve, temperature-activity curve, susceptibility to inhibitors, and pattern of hydrolysis products from soluble starch and maltooligosaccharides. However, the engineered enzyme also acquired increased pH stability and resistance to sodium dodecyl sulfate and especially chelating reagents, such as ethylenediaminetetraacetate and ethyleneglycol-bis (beta-aminoethylether)tetraacetate. This is the first report that thermostability of alpha-amylase is improved by enhanced calcium binding to the enzyme molecule.

Crystal structure of a catalytic-site mutant alpha-amylase from Bacillus subtilis complexed with maltopentaose

The X-ray crystal structure of a catalytic-site mutant EQ208 [Glu208-->Gln] of alpha-amylase from Bacillus subtilis cocrystallized with maltopentaose (G5) and acarbose has been determined by multiple isomorphous replacement at 2.5 A resolution. Restrained crystallographic refinement has resulted in an R-factor of 19.8% in the 7.0 to 2.5 A resolution range. EQ208 consists of three domains containing a (beta/alpha)8-barrel as observed in other alpha-amylases. Clear connected density corresponding to a pentasaccharide was observed, which was considered as the G5 molecule based on the high affinity of EQ208 for G5 that could replace pre-bound acarbose or a possible transglycosylation product of acarbose. The conformation around the third alpha-(1,4)-glucosidic bond makes a sharp turn, allowing the substrate to fit into the L-shaped cleft. Aromatic residues build the walls of the substrate binding cleft and leucine residues form the inner curvature of the cleft. The amide nitrogen of Gln208 forms a hydrogen bond with the glucosidic oxygen in the scissile bond between Glc3 and Glc4 (Glc1 is the non-reducing end glucose residue of the substrate). This hydrogen-bonding manner may correspond to that of the protonated state of Glu208 in the initial kinetic complex between wild-type enzyme and substrate. The amide oxygen of Gln208 is anchored by two hydrogen bonds with Ala177 and a water molecule, assisting to make the amide proton point precisely to the place of the catalytic attack. The carboxyl oxygen atoms of the other catalytic-site residues Asp176 and Asp269 form hydrogen bonds with the oxygen atoms of Glc3. The carboxyl group of Asp176 has non-bonded contacts to the anomeric carbon atom and to the endocyclic oxygen atom of Glc3. These results suggest that Glu208 acts as a general acid and Asp176 as a general base. Glc3 forms seven hydrogen bonds with the surrounding protein groups and a stacking interaction with Tyr62, which is consistent with the fact that Glc3 has the lowest mean thermal factor of 13.2 A2 among the five sugar residues. Three calcium ions are found, one of which is positioned near the substrate binding site as found in other alpha-amylases and could contribute to stabilization of the structure of the active site.

Knowledge-based model of a glucosyltransferase from the oral bacterial group of mutans streptococci

Mutans streptococci glucosyltransferases catalyze glucosyl transfer from sucrose to a glucan chain. We previously identified an aspartyl residue that participates in stabilizing the glucosyl transition state. The sequence surrounding the aspartate was found to have substantial sequence similarity with members of alpha-amylase family. Because little is known of the protein structure beyond the amino acid sequence, we used a knowledge-based interactive algorithm, MACAW, which provided significant level of homology with alpha-amylases and glucosyltransferase from Streptococcus downei gtfI (GTF). The significance of GTF similarity is underlined by GTF/alpha-amylase residues conserved in all but one alpha-amylase invariant residues. Site-directed mutagenesis of the three GTF catalytic residues are homologous with the alpha-amylase catalytic triad. The glucosyltransferases are members of the 4/7-superfamily that have a (beta/alpha)8-barrel structure and belong to family 13 of the glycohydralases.

Crystal structures of a mutant maltotetraose-forming exo-amylase cocrystallized with maltopentaose

The three-dimensional structures of the catalytic residue Glu219-->Gln mutant of Pseudomonas stutzeri maltotetraose-forming exo-alpha-amylase, and its complex with carbohydrate obtained by cocrystallization with maltopentaose were determined. Two crystal forms were obtained for the complexed enzyme, and a bound maltotetraose was found in each. The structures were analyzed at 2.2 A and 1.9 A resolution, respectively for the uncomplexed and complexed mutant. These structures were compared with the wild-type enzyme structure. In the complexed crystals, the maltotetraose was firmly bound, extensively interacting with the amino acid environments in the active cleft. The non-reducing end glucose unit was hydrogen bonded to the side-chain of Asp160 and the main-chain nitrogen of Gly158, which seem to be predominantly required for the recognition of the non-reducing end of the substrate that determines the exo-wise degradation of this enzyme. The reducing end glucose unit of bound maltotetraose showed clear deformation, adopting a half-chair conformation with extensive hydrogen bonds to surrounding polypeptides. The C1-atom of this deformed glucose unit lies very close to Asp193OD1 with a distance of 2.6 A. The catalytic residue Asp294 is firmly hydrogen-bonded to the O2 and O3-hydroxyl groups of the deformed reducing end glucose unit. Upon binding of the carbohydrate, small but significant induced fits were observed in the regions of Asp294, Phe156, Ile157, and Asp160. Possible roles of the three catalytic residues are also discussed.

Crystal structure of a maltotetraose-forming exo-amylase from Pseudomonas stutzeri

The three-dimensional structure of an exo-type alpha-amylase from Pseudomonas stutzeri which degrades starch from its non-reducing end to produce maltotetraose has been determined by X-ray structure analysis. The catalytic domain of this enzyme (G4-2), whose structure was determined, is a product of spontaneous limited proteolysis in culture broth. It has 429 amino acid residues and a molecular mass of 47,200, and crystallizes in ammonium sulfate solution at pH 7.5. The structure was elucidated by the multiple isomorphous replacement method and refined at 2.0 A resolution, resulting in a final R-factor of 0.178 for significant reflections with a root-mean-square deviation from ideality in bond distances of 0.013 A. The polypeptide chain of this molecule folds into three domains; the first with a (beta/alpha)8 barrel structure, the second with an excursed part from the first one, and the third with five-stranded antiparallel beta-sheets. The active cleft is formed on the C-terminal side of the beta-sheets in the (beta/alpha)8 barrel as in the known endo-type alpha-amylases. A histidine side-chain nitrogen ND1 is coordinated to one of the bound calcium ion. The recognition site of the non-reducing end of the amylose that determines exo-wise degradation is presumed to be at one end of this cleft where there is a disordered loop consisting of the 66th to 72nd residues, and a loop carrying an aspartic acid (Asp160). These structural features may be responsible for the binding of the non-reducing end of the substrate amylose.

Structural consequences of neopullulanase mutations

Bacillus stearothermophilus neopullulanase (NPL) structure was modeled based on Aspergillus oryzae alpha-amylase (TAA) to understand the structure-function relationships of this pullulan hydrolyzing enzyme. The NPL structure seems to consist of a central (alpha/beta)8 barrel to which the other domains are attached. The immediate surroundings of the NPL catalytic site were found to have very similar structure to TAA. The more distant sites are different due to the stereochemical requirements of accommodating in the substrate alpha-1,6-linkages at every third position instead of alpha-1,4-linkages. The substrate binding cleft is wider than in alpha-amylases. The NPL structure, function, substrate binding and the consequences of mutations were discussed based on the modeled structure.

Evidence for essential arginine residues at the active sites of maize branching enzymes

Alignment of 23 branching enzyme (BE) amino acid sequences from various species showed conservation of two arginine residues. Phenylglyoxal (PGO) was used to investigate the involvement of arginine residues of maize BEI and BEII in catalysis. BE was significantly inactivated by PGO in triethanolamine buffer at pH 8.5. The inactivation followed a time- and concentration-dependent manner and showed pseudo first-order kinetics. Slopes of 0.73 (BEI) and 1.05 (BEII) were obtained from double log plots of the observed rates of inactivation against the concentrations of PGO, suggesting that loss of BE activity results from as few as one arginine residue modified by PGO. BE inactivation was positively correlated with [14C]PGO incorporation into BE protein and was considerably protected by amylose and/or amylopectin, suggesting that the modified arginine residue may be involved in substrate binding or located near the substrate-binding sites of maize branching enzymes I and II.

Purification and characterization of a truncated Bacillus subtilis alpha-amylase produced by Escherichia coli

A Bacillus subtilis amylase gene was inserted into a plasmid which was transferred to Escherichia coli. During cloning, a 3' region encoding 171 carboxy-terminal amino acids was replaced by a nucleotide sequence that encoded 33 amino acid residues not present in the indigenous protein. The transformed cells produced substantial amylolytic activity. The active protein was purified to apparent homogeneity. Its molecular mass (48 kDa), as estimated in sodium dodecyl sulfate/polyacrylamide gel electrophoresis, was lower than the molecular mass values calculated from the derived amino acid sequences of the B. subtilis complete alpha-amylase (57.7 kDa) and the truncated protein (54.1 kDa). This truncated enzyme form hydrolysed starch with a Km of 3.845 mg/ml. Activity was optimal at pH 6.5 and 50 degrees C, and the purified enzyme was stable at temperatures up to 50 degrees C. While Hg2+, Fe3+ and Al+3 were effective in inhibiting the truncated enzyme, Mn2+ and Co2+ considerably enhanced the activity.

Protein engineering in the alpha-amylase family: catalytic mechanism, substrate specificity, and stability

Most starch hydrolases and related enzymes belong to the alpha-amylase family which contains a characteristic catalytic (beta/alpha)8-barrel domain. Currently known primary structures that have sequence similarities represent 18 different specificities, including starch branching enzyme. Crystal structures have been reported in three of these enzyme classes: the alpha-amylases, the cyclodextrin glucanotransferases, and the oligo-1,6-glucosidases. Throughout the alpha-amylase family, only eight amino acid residues are invariant, seven at the active site and a glycine in a short turn. However, comparison of three-dimensional models with a multiple sequence alignment suggests that the diversity in specificity arises by variation in substrate binding at the beta-->alpha loops. Designed mutations thus have enhanced transferase activity and altered the oligosaccharide product patterns of alpha-amylases, changed the distribution of alpha-, beta- and gamma-cyclodextrin production by cyclodextrin glucanotransferases, and shifted the relative alpha-1,4:alpha-1,6 dual-bond specificity of neopullulanase. Barley alpha-amylase isozyme hybrids and Bacillus alpha-amylases demonstrate the impact of a small domain B protruding from the (beta/alpha)8-scaffold on the function and stability. Prospects for rational engineering in this family include important members of plant origin, such as alpha-amylase, starch branching and debranching enzymes, and amylomaltase.

Starch- and glycogen-debranching and branching enzymes: prediction of structural features of the catalytic (beta/alpha)8-barrel domain and evolutionary relationship to other amylolytic enzymes

Sequence alignment and structure prediction are used to locate catalytic alpha-amylase-type (beta/alpha)8-barrel domains and the positions of their beta-strands and alpha-helices in isoamylase, pullulanase, neopullulanase, alpha-amylase-pullulanase, dextran glucosidase, branching enzyme, and glycogen branching enzymes--all enzymes involved in hydrolysis or synthesis of alpha-1,6-glucosidic linkages in starch and related polysaccharides. This has allowed identification of the transferase active site of the glycogen debranching enzyme and the locations of beta-->alpha loops making up the active sites of all enzymes studied. Activity and specificity of the enzymes are discussed in terms of conserved amino acid residues and loop variations. An evolutionary distance tree of 47 amylolytic and related enzymes is built on 37 residues representing the four best conserved beta-strands of the barrel. It exhibits clusters of enzymes close in specificity, with the branching and glycogen debranching enzymes being the most distantly related.

Salivary alpha-amylase: role in dental plaque and caries formation

Salivary alpha-amylase, one of the most plentiful components in human saliva, has at least three distinct biological functions. The enzymatic activity of alpha-amylase undoubtedly plays a role in carbohydrate digestion. Amylase in solution binds with high affinity to a selected group of oral streptococci, a function that may contribute to bacterial clearance and nutrition. The fact that alpha-amylase is also found in acquired enamel pellicle suggests a role in the adhesion of alpha-amylase-binding bacteria. All of these biological activities seem to depend on an intact enzyme conformation. Binding of alpha-amylase to bacteria and teeth may have important implications for dental plaque and caries formation. alpha-Amylase bound to bacteria in plaque may facilitate dietary starch hydrolysis to provide additional glucose for metabolism by plaque microorganisms in close proximity to the tooth surface. The resulting lactic acid produced may be added to the pool of acid in plaque to contribute to tooth demineralization.

Hyperthermostable variants of a highly thermostable alpha-amylase

Genetic screening at temperatures between 70-80 degrees C far exceeds the range of growth of most bacteria, and is not applicable to isolate easily thermostable protein variants. We describe a temperature shift protocol and an in vivo screening method which allowed us to identify a hyperthermostable variant of the thermostable alpha-amylase from Bacillus licheniformis. Our strategy was to select, after hydroxylamine mutagenesis, an intragenic suppressor mutation which overcomes a mutation leading to a thermolabile enzyme. Sequence analysis of the mutated gene revealed only one change in the amino acid sequence, substituting a valine for alanine at position 209. This single amino acid replacement increased the half-life of the protein at 90 degrees C by a factor of two to three relative to the wild-type enzyme. When this substitution was combined with another stabilizing substitution (H133Y) we described previously, the stabilizing effects were additive. The half-life of the new protein was about 12 hours at 90 degrees C, corresponding to a nine to ten-fold increase over the wild-type enzyme and the industrial Bacillus licheniformis alpha-amylase Termamyl. These mutations are located in a predicted folding domain of the protein which appears crucial in determining thermal stability.

Effect of mutation of an amino acid residue near the catalytic site on the activity of Bacillus stearothermophilus alpha-amylase

Site-directed mutagenesis of a thermostable alpha-amylase from Bacillus stearothermophilus was performed to assess the role of amino acid residues near the catalytic site in catalysis. Asn329 is presumed to be adjacent to the proposed catalytic residue Asp331. Its mutation to Lys, which is found at the corresponding position in pullulanase, resulted in the loss of 99.7% of the activity, while the mutation to Asp or Val did not drastically reduce the activity. The mutation to Val altered the temperature/activity profile so that the activity was reduced to 25% of wild-type alpha-amylase at 60 degrees C but was over twofold greater at 5 degrees C. This effect could be ascribed to a decrease in the activation enthalpy by 32%. The mutation to Asp or Lys altered the pH/activity profile concomitant with possible changes in the ionization state of the groups introduced. These results show the feasibility of altering and possibly improving the enzyme activity by mutagenesis of residues near the catalytic groups.