Fine Mapping and Identification of Nucleotide Binding Site/Leucine-Rich Repeat Sequences at the MER Locus in Populus deltoides 'S9-2'

Advanced Breeding for Biotic Stress Resistance in Poplar

Poplar is one of the most important forest trees because of its high economic value. Thanks to the fast-growing rate, easy vegetative propagation and transformation, and availability of genomic resources, poplar has been considered the model species for forest genetics, genomics, and breeding. Being a field-growing tree, poplar is exposed to environmental threats, including biotic stresses that are becoming more intense and diffused because of global warming. Current poplar farming is mainly based on monocultures of a few elite clones and the expensive and long-term conventional breeding programmes of perennial tree species cannot face current climate-change challenges. Consequently, new tools and methods are necessary to reduce the limits of traditional breeding related to the long generation time and to discover new sources of resistance. Recent advances in genomics, marker-assisted selection, genomic prediction, and genome editing offer powerful tools to efficiently exploit the Populus genetic diversity and allow enabling molecular breeding to support accurate early selection, increasing the efficiency, and reducing the time and costs of poplar breeding, that, in turn, will improve our capacity to face or prevent the emergence of new diseases or pests.

Identification of Genes Underlying the Resistance to Melampsora larici-populina in an R Gene Supercluster of the Populus deltoides Genome

Identification of the particular genes in an R genes supercluster underlying resistance to the rust fungus Melampsora larici-populina in poplar genome remains challenging. Based on the de novo assembly of the Populus deltoides genome, all of the detected major genetic loci conferring resistance to M. larici-populina were confined to a 3.5-Mb region on chromosome 19. The transcriptomes of the resistant and susceptible genotypes were sequenced for a timespan from 0 to 168 hours postinoculation. By mapping the differentially expressed genes to the target genomic region, we identified two constitutive expression R genes and one inducible expression R gene that might confer resistance to M. larici-populina. Nucleotide variations were predicted based on the reconstructed haplotypes for each allele of the candidate genes. We also confirmed that salicylic acid was the phytohormone mediating signal transduction pathways, and PR-1 was identified as a key gene inhibiting rust reproduction. Finally, quantitative reverse transcription PCR assay revealed consistent expressions with the RNA-sequencing data for the detected key genes. This study presents an efficient approach for the identification of particular genes underlying phenotype of interest by the combination of genetic mapping, transcriptome profiling, and candidate gene sequences dissection. The identified key genes would be useful for host resistance diagnosis and for molecular breeding of elite poplar cultivars exhibiting resistance to M. larici-populina infection. The detected R genes are also valuable for testing whether the combination of individual R genes can induce durable quantitative resistance.

Association analysis identifies Melampsora ×columbiana poplar leaf rust resistance SNPs

Populus species are currently being domesticated through intensive time- and resource-dependent programs for utilization in phytoremediation, wood and paper products, and conversion to biofuels. Poplar leaf rust disease can greatly reduce wood volume. Genetic resistance is effective in reducing economic losses but major resistance loci have been race-specific and can be readily defeated by the pathogen. Developing durable disease resistance requires the identification of non-race-specific loci. In the presented study, area under the disease progress curve was calculated from natural infection of Melampsora ×columbiana in three consecutive years. Association analysis was performed using 412 P. trichocarpa clones genotyped with 29,355 SNPs covering 3,543 genes. We found 40 SNPs within 26 unique genes significantly associated (permutated P<0.05) with poplar rust severity. Moreover, two SNPs were repeated in all three years suggesting non-race-specificity and three additional SNPs were differentially expressed in other poplar rust interactions. These five SNPs were found in genes that have orthologs in Arabidopsis with functionality in pathogen induced transcriptome reprogramming, Ca²⁺/calmodulin and salicylic acid signaling, and tolerance to reactive oxygen species. The additive effect of non-R gene functional variants may constitute high levels of durable poplar leaf rust resistance. Therefore, these findings are of significance for speeding the genetic improvement of this long-lived, economically important organism.

Qualitative and quantitative resistances to leaf rust finely mapped within two nucleotide-binding site leucine-rich repeat (NBS-LRR)-rich genomic regions of chromosome 19 in poplar

• R(US) is a major dominant gene controlling quantitative resistance, inherited from Populus trichocarpa, whereas R(1) is a gene governing qualitative resistance, inherited from P. deltoides. • Here, we report a reiterative process of concomitant fine-scale genetic and physical mapping guided by the P. trichocarpa genome sequence. The high-resolution linkage maps were developed using a P. deltoides × P. trichocarpa progeny of 1415 individuals. R(US) and R(1) were mapped in a peritelomeric region of chromosome 19. Markers closely linked to R(US) were used to screen a bacterial artificial chromosome (BAC) library constructed from the P. trichocarpa parent, heterozygous at the locus R(US) . • Two local physical maps were developed, one encompassing the R(US) allele and the other spanning r(US) . The alignment of the two haplophysical maps showed structural differences between haplotypes. The genetic and physical maps were anchored to the genome sequence, revealing genome sequence misassembly. Finally, the R(US) locus was localized within a 0.8-cM interval, whereas R(1) was localized upstream of R(US) within a 1.1-cM interval. • The alignment of the genetic and physical maps with the local reorder of the chromosome 19 sequence indicated that R(US) and R(1) belonged to a genomic region rich in nucleotide-binding site leucine-rich repeat (NBS-LRR) and serine threonine kinase (STK) genes.

Innate immunity: has poplar made its BED?

The perennial plant model species Populus trichocarpa has received considerable attention in the last 5 yr because of its potential use as a bioenergy crop. The completion of its genome sequence revealed extensive homologies with the herbaceous annual species Arabidopsis thaliana. This review highlights the similarities and differences at the qualitative defence response components level, notably in putative NBS-LRR protein content and downstream defence regulators. With almost a twofold NBS-LRR gene complement compared with A. thaliana, P. trichocarpa also encodes some putative R-proteins with unusual architectures and possible DNA-binding capacity. P. trichocarpa also possesses all the known main components characteristic of TIR-NB-LRR and CC-NB-LRR signalling. However, very little has been done with regard to the components involved in the poplar qualitative response to pathogens. In addition, the relationship between plant-biotroph perception/signalling and the role of salicylic acid, an important defence compound, remains uncertain. This review aims to identify the genomic components present in poplar that could potentially participate in the qualitative response and highlights where efforts should be devoted to obtain a better understanding of the poplar qualitative defence response.

Genetic improvement of willow for bioenergy and biofuels

Willows (Salix spp.) are a very diverse group of catkin-bearing trees and shrubs that are widely distributed across temperate regions of the globe. Some species respond well to being grown in short rotation coppice (SRC) cycles, which are much shorter than conventional forestry. Coppicing reinvigorates growth and the biomass rapidly accumulated can be used as a source of renewable carbon for bioenergy and biofuels. As SRC willows re-distribute nutrients during the perennial cycle they require only minimal nitrogen fertilizer for growth. This results in fuel chains with potentially high greenhouse gas reductions. To exploit their potential for renewable energy, willows need to be kept free of pests and diseases and yields need to be improved without significantly increasing the requirements for fertilizers and water. The biomass composition needs to be optimized for different end-uses. Yields also need to be sustainable on land less productive for food crops to reduce conflicts over land use. Advances in understanding the physiology and growth of willow, and in the identification of genes underlying key traits, are now at the stage where they can start to be used in breeding programs to help achieve these goals.

Genome-wide identification of NBS resistance genes in Populus trichocarpa

As the largest class of disease resistance R genes, the genes encoding nucleotide binding site and leucine-rich repeat proteins ("NBS-LRR genes") play a critical role in defending plants from a multitude of pathogens and pests. The diversity of NBS-LRR genes was examined in the Populus trichocarpa draft genome sequence. The NBS class of genes in this perennial tree is large and diverse, comprised of approximately 400 genes, at least twice the complement of Arabidopsis. The NBS family can be divided into multiple subfamilies with distinct domain organizations. It includes 119 Coiled-Coil-NBS-LRR genes, 64 TIR-NBS-LRR genes, 34 BED-finger-NBS-LRR, and both truncated and unusual NBS- and NBS-LRR-containing genes. The transcripts of only 34 NBS-LRR genes were detected in rust-infected and non-infected leaves using a whole-genome oligoarray. None showed an altered expression two days post inoculation.

Biotechnology and the domestication of forest trees

Wood is one of the major renewable materials. To compensate for the ever-increasing demand for wood and to reduce pressure on native forests, more wood of higher quality will need to be produced on less land by planting highly productive trees. Biotechnology has shown great promise for forest tree improvement and over the past 10 years this field has flourished. Not only has the potential of transgenic trees with optimized yield and quality traits been demonstrated in field trials, but progress in genetical genomics and association genetics promise quantum leaps forward for tree improvement.

Genetic architecture of qualitative and quantitative Melampsora larici-populina leaf rust resistance in hybrid poplar: genetic mapping and QTL detection

In order to elucidate the genetic control of resistance to Melampsora larici-populina leaf rust in hybrid poplars, a Populus deltoides x P. trichocarpa F(1) progeny was analysed for qualitative and quantitative rust resistances. This progeny was evaluated for three components of quantitative resistance (latent period, uredinia number and uredinia size) to seven M. larici-populina strains in controlled conditions, and for one component of field susceptibility (rust colonization on the most infected leaf). One qualitative resistance locus inherited from P. deltoides, R(1), was localized on the genetic map. It segregates 1 : 1 in the F(1) progeny and is effective against four of the studied strains. QTL analysis was performed separately on R(1) and r(1) genotype subsets. An additional detection was conducted on the entire F(1) progeny for the three strains able to overcome R(1) and for MAX2. A total of nine QTLs were detected. Two had large, broad-spectrum effects. One (R(US)) is inherited from the P. trichocarpa parent; the other is inherited from P. deltoides and colocalized with R(1). Seven QTLs had only limited and specific effects. Significant interaction effects were detected mainly between the two major QTLs. Implications of these results for durable resistance breeding strategies, and possible benefits from the Populus genome sequence, are discussed.

Genetic analysis of phenotypic variation for ectomycorrhiza formation in an interspecific F1 poplar full-sib family

A plant's capability to develop ectomycorrhizal symbiosis is under the control of both genetic and environmental factors. In order to determine the roles played by these different factors, we have performed a quantitative genetic analysis of the ability of poplar trees to form ectomycorrhizas. Quantitative genetics were applied to an interspecific family of poplar for which the two parental genetic maps had already been described, and for which data analyses concerning fungal aggressors were obtained. Quantitative trait loci (QTL) related to ectomycorrhiza formation were identified and located in the genetic maps of the two parents. One QTL was located at a linkage group of the genetic map of Populus trichocarpa showing a high concentration of several QTL involved in the pathogenic interaction with the fungus Melampsora larici-populina, the causal agent of leaf rust.

Genetic and physical mapping of Melampsora rust resistance genes in Populus and characterization of linkage disequilibrium and flanking genomic sequence

•  In an attempt to elucidate the molecular mechanisms of Melampsora rust resistance in Populus trichocarpa, we have mapped two resistance loci, MXC3 and MER, and intensively characterized the flanking genomic sequence for the MXC3 locus and the level of linkage disequilibrium (LD) in natural populations. •  We used an interspecific backcross pedigree and a genetic map that was highly saturated with AFLP and SSR markers, and assembled shotgun-sequence data in the region containing markers linked to MXC3. •  The two loci were mapped to different linkage groups. Linkage disequilibrium for MXC3 was confined to two closely linked regions spanning 34 and 16 kb, respectively. The MXC3 region also contained six disease-resistance candidate genes. •  The MER and MXC3 loci are clearly distinct, and may have different mechanisms of resistance, as different classes of putative resistance genes were present near each locus. The suppressed recombination previously observed in the MXC3 region was possibly caused by extensive hemizygous rearrangements confined to the original parent tree. The relatively low observed LD may facilitate association studies using candidate genes for rust resistance, but will probably inhibit marker-aided selection.

Large-scale heterospecific segregation distortion in Populus revealed by a dense genetic map

We report the most complete genetic map to have been constructed for the genus Populus. This map includes 544 markers mapped onto 19 linkage groups, equivalent to the Populus chromosome number, with all markers displaying internally consistent linkage patterns. We estimate the genome length to be between 2,300 and 2,500 cM, based both on the observed number of crossovers in the maternal haplotypes, as well as the total observed map length. Genome coverage was estimated to be greater than 99.9% at 20 cM per marker. We did not detect obvious recombination repression in the maternal tree (a hybrid of Populus trichocarpa Hooker x P. deltoides Marsh.) compared to the paternal tree (pure P. deltoides). Finally, most markers exhibiting segregation distortion were derived from the donor parent in this backcross, and generally occurred in large contiguous blocks on two linkage groups. We hypothesize that divergent selection has occurred on chromosomal scales among the parental species used to create this pedigree, and explore the evolutionary implications of this observation. This genetic linkage map provides the most comprehensive view of the Populus genome reported to date and will prove invaluable for future inquiries into the structural and functional genomics, evolutionary biology, and genetic improvement of this ecologically important model species.

Annotation of a 95-kb Populus deltoides genomic sequence reveals a disease resistance gene cluster and novel class I and class II transposable elements

Poplar has become a model system for functional genomics in woody plants. Here, we report the sequencing and annotation of the first large contiguous stretch of genomic sequence (95 kb) of poplar, corresponding to a bacterial artificial chromosome clone mapped 0.6 centiMorgan from the Melampsora larici-populina resistance locus. The annotation revealed 15 putative genetic objects, of which five were classified as hypothetical genes that were similar only with expressed sequence tags from poplar. Ten putative objects showed similarity with known genes, of which one was similar to a kinase. Three other objects corresponded to the toll/interleukin-1 receptor/nucleotide-binding site/leucine-rich repeat class of plant disease resistance genes, of which two were predicted to encode an amino terminal nuclear localization signal. Four objects were homologous to the Ty1/ copia family of class I transposable elements, one of which was designated Retropop and interrupted one of the disease resistance genes. Two other objects constituted a novel Spm-like class II transposable element, which we designated Magali.

Resistance to rust ( Puccinia psidii Winter) in eucalyptus: mode of inheritance and mapping of a major gene with RAPD markers

Rust is one of the most-damaging eucalypt diseases in Brazil and is considered a potential threat to eucalypt plantations worldwide. To determine the mode of inheritance of resistance in the Eucalyptus grandis- Puccinia psidii pathosystem, ten full-sib families, generated from crosses between susceptible and resistant trees, were inoculated with a single-pustule isolate of the pathogen and rust severity was scored. The observed segregation ratios in segregating families suggested major gene control of rust resistance, although clearly incomplete penetrance, variable expressivity and minor genes are also involved in the global rust-resistance response. To identify markers linked to the resistance locus, screening of RAPD polymorphisms was conducted using bulked segregant analysis in a large full-sib family. A linkage group was built around the Ppr1 gene ( P. psidii resistance gene 1) encompassing six RAPD markers, with a genetic window spanning 5 cM with the two most-closely linked flanking markers. Besides these two flanking markers, RAPD marker AT9/917 co-segregated with Ppr1 without a single recombinant in 994 meioses. This tightly linked marker should prove useful for marker-assisted introgression and will provide an initial lead for a positional cloning effort of this resistance allele. This is the first report of a disease resistance gene identified in Eucalyptus, and one of the few examples of the involvement of a major gene in a non-coevolved pathosystem.

The poplar root transcriptome: analysis of 7000 expressed sequence tags

To date, most poplar expressed sequence tags (ESTs) are from above-ground tissues such as wood, leaf and buds. Here, we present a large-scale production of ESTs from roots of the hybrid cottonwood, Populus trichocarpaxdeltoides. cDNA libraries were generated from the root system of 2-month-old rooted cuttings, and roots of 2.5-month-old cuttings water-stressed for 19 days. Partial sequences obtained from 7013 clones were assembled into 1347 clusters and 3527 singletons. This set of ESTs represents 4874 unique transcripts expressed in roots. Putative functions could be assigned to 3021 (62%) of the transcripts. A significant portion of the ESTs encode proteins of common metabolic pathways; energy and metabolism represented 5% and 8% of total transcripts, respectively. Of specific interest to root functions are the 6% of ESTs involved in signalling pathways and hormone metabolism, and 4% encoding transporters and channels. The current poplar root ESTs and the aspen root ESTs present in public databases represent 6700 unique transcripts. The Unigene set was selected from the ESTs and used to generate nylon microarrays. Changes in aquaporins and transporter transcripts were then studied during adventitious root development.