Metal-on-Metal Versus Polyethylene in Hip Arthroplasty: A Randomized Clinical Trial:

Metal-on-metal disease in wrist arthroplasty: a systematic review and proposed management algorithm

BACKGROUND

Wrist arthroplasty is becoming increasingly popular. Metal-on-metal (MOM) articulations have been offered to diminish wear and increase range of motion. This systematic review aims to survey the literature for reports of MOM disease in the setting of wrist arthroplasty, identify patient characteristics that may predispose to its incidence and offer an algorithm for management of such patients.

METHODS

An electronic database search of PubMed, Ovid Medline, Embase and CENTRAL was performed. Studies were included if they were published in English; reported original data following the implantation of a wrist replacement device; and commented on the presence of either intra-capsular metallosis or raised systemic metal ion levels. Studies were graded by the QUADAS-2 tool.

RESULTS

Nine studies with 124 patients were identified for inclusion. The mean age was 63 years (range 29-87). Complications included neurological symptoms, wrist pain, loss of range of motion and swelling. Time to revision surgery ranged from 12.5 to 72 months. The arc range of motion ranged from 112 to 140 degrees.

CONCLUSIONS

MOM disease is seen in patients with a retained arc of motion, particularly in females. A MOM articulation is not recommended when implanting a wrist arthroplasty. Close surveillance utilizing regular clinical, haematological and radiological review should be performed in patients who have previously undergone wrist arthroplasty with MOM articulation.

LEVEL OF EVIDENCE

V.

Orthopaedic implant cobaltism from spinal instrumentation

Cobaltism is a well-defined common complication of cobalt-chromium arthroprosthetic implants but has not been previously reported from cobalt-chromium spinal components. Orthopaedic implant cobaltism (OIC) is a spectrum illness, and its severity relates to the magnitude of cobalturia and cobaltaemia and duration of implantation of the wearing or corroding cobalt-chromium component. This case report demonstrates a patient with OIC from failed scoliosis instrumentation using cobalt-chromium rods that both corroded at multiple interfaces with titanium alloy pedicle screws and fractured at the lumbosacral pseudoarthrosis. This patient's symptoms included tremors, cognitive decline, insomnia and visual changes. The diagnosis of OIC was confirmed when peri-implant fluid returned a cobalt greater than 4800 mcg/L and peri-implant tissue showed obvious signs of metallosis. Following the revision surgery without cobalt-containing implants, the patient's symptoms improved and the blood-cobalt has returned to near-normal values. This is the first reported case of reversible OIC from spinal implants.

No Difference in Revision Rates and High Survival Rates in Large-head Metal-on-metal THA Versus Metal-on-polyethylene THA: Long-term Results of a Randomized Controlled Trial

BACKGROUND

Pseudotumor formation is a well-known complication in metal-on-metal (MoM) THA. Pseudotumors combined with elevated serum ion levels and complaints from patients can lead to high revision rates. Long-term (> 10 years) results obtained from randomized trials comparing large-head MoM THA and conventional metal-on-polyethylene (MoP) THA are lacking regarding revision and survival rates, pseudotumor formation, functional outcomes, and serum ion levels.

QUESTIONS/PURPOSES

At 10 years of follow-up, (1) what is the difference in survival and revision rates between large-head (38 to 60 mm) MoM THA and conventional 28-mm MoP THA? (2) What is the difference in pseudotumor formation between large-head MoM THA and MoP THA? (3) Is there a difference in functional outcome between large-head MoM THA and MoP THA? (4) What is the difference in serum ion levels between large-head MoM THA and MoP THA?

METHODS

Between January 2006 and December 2008, 104 patients were randomized to receive either cementless MoM THA (50 patients) or cementless MoP THA (54 patients). In all, 78% (81 of 104) of patients completed the 10-year postoperative follow-up: 36 patients with MoM THA (72%; six patients lost to follow-up) and 45 with MoP THA (83%; four lost to follow-up). In the MoM group, 47% (17) were men, and the patients had a mean ± SD age of 60 ± 5 years. In the MoP group, 38% (17) were men, and the patients had a mean age of 61 ± 5 years. All baseline characteristics were similar between the groups. At 10 years of follow-up, all patient records were screened for revision surgery or complications, and the primary endpoint was survivorship free from revision for any cause at the 10-year follow-up interval, which we analyzed using a Kaplan-Meier survival analysis. All patients had a CT scan to determine the pseudotumor classification, which was reviewed by an independent radiologist. Functional outcome was measured using the patient-reported Oxford Hip Score and Harris Hip Score; the latter was assessed by a blinded nurse practitioner. Finally, serum ion cobalt and chrome concentrations were measured at 10 years postoperatively. Because the a priori sample size calculation for this randomized controlled trial was based on a different endpoint, a post hoc power analysis was performed for this long-term follow-up study, with survival as the primary outcome. It showed that considering the number of included patients, this study would have sufficient power (one-sided testing, alpha 0.05, power 80%) to discern a difference of 20% in the survival rate between the MoP and MoM groups (95% versus 75%).

RESULTS

With the numbers available, there was no difference in survivorship free from revision for any cause between the MoP group and MoM group at 10 years (95% [95% CI 85% to 98%] versus 92% [95% CI 82% to 98%]; p = 0.6). A higher percentage of patients in the MoM group had pseudotumors on CT than those in the MoP group did, but pseudotumors were observed in both groups (56% [20 of 36] in the MoM group versus 22% [10 of 45] in the MoP group, relative risk 1.8 [95% CI 1.2 to 2.6]; p = 0.002). A higher proportion of elevated cobalt and chrome levels was found in the MoM group (19% and 14%, respectively) than in the MoP group (0% for both cobalt and chrome) (cobalt: RR 1.2 [95% CI 1.1 to 1.5]; p = 0.002; chrome: RR 1.2 [95% CI 1.0 to 1.3]; p = 0.01). In 25% of the patients with pseudotumors (5 of 20 patients), there were elevated serum cobalt levels. None of the 23 patients without pseudotumors had elevated cobalt levels (RR 1.3 [95% CI 1.0 to 1.7]; p = 0.01). There was no difference in functional outcome between study groups, nor a difference between patients with a pseudotumor and those without.

CONCLUSION

This study showed that the survival of patients with large-head MoM THA was high and comparable to that of those with MoP THA, which contrasts with the high revision rates reported by others. Although some patients with MoP THAs experienced pseudotumors, the risk of a pseudotumor was much greater in MoM hips, and serum ion levels were higher in patients who received an MoM THA. For these reasons and unknown future complications, continued surveillance of patients with MoM THAs seems important.

LEVEL OF EVIDENCE

Level I, therapeutic study.

Metallosis in Total Hip Arthroplasty

» Metallosis is a rare but significant complication that can occur after total hip arthroplasty (THA) for a variety of reasons but most commonly in patients with metal-on-metal implants.» It is characterized by the visible staining, necrosis, and fibrosis of the periprosthetic soft tissues, along with the variable presence of aseptic cysts and solid soft tissue masses called pseudotumors secondary to the corrosion and deposition of metal debris.» Metallosis can present with a spectrum of complications ranging from pain and inflammation to more severe symptoms such as osteolysis, soft tissue damage, and pseudotumor formation.» Workup of metallosis includes a clinical evaluation of the patient's symptoms, imaging studies, serum metal-ion levels, and intraoperative visualization of the staining of tissues. Inflammatory markers such as erythrocyte sedimentation rate and C-reactive protein along with intraoperative frozen slice analysis may be useful in certain cases to rule out concurrent periprosthetic joint infection.» Management depends on the severity and extent of the condition; however, revision THA is often required to prevent rapid progression of bone loss and tissue necrosis.

Adverse reaction to metal debris with accompanying gout and amyloid deposits in hip arthroplasty

Adverse reaction to metal debris (ARMD) is a known complication of metal-on-metal hip arthroplasty. There has been one previously reported case of ARMD with concomitant gout in the setting of a hip arthroplasty. We report a case of ARMD with accompanying monosodium urate crystals as well as amyloid deposition in the hip of a patient who had undergone a metal-on-metal hip arthroplasty. This is the only published case to date of these 3 conditions co-existing, although it is possible that the incidence is higher since these require special diagnostic tests that are not routinely performed. It is postulated that these entities are biochemically associated with each other rather than being purely coincidental.

Periarticular metal hypersensitivity complications of hip bearings containing cobalt-chromium

Hip joints with bearings composed of cobalt-chromium alloy (metal-on-metal bearings) have been one of the most widely used implants in joint replacement arthroplasty. Unfortunately, these implants can contribute to a complication called aseptic lymphocyte-dominated vasculitis-associated lesion (ALVAL), a type IV metal hypersensitivity response around the joint. Consistent with such bearings, increased metal debris can be found in the surrounding fluids and in remote tissues and organs, due to wear and corrosion. It is hypothesized that metal ions released from the prosthesis (including Co2+) can potentially form haptens with proteins such as serum albumin in synovial fluid that in turn elicit ALVAL. Generally, elevated cobalt and chromium levels in synovial fluids may indicate implant failure. However, such measurements cannot be used as a reliable tool to predict the onset of ALVAL. To detect ALVAL, some diagnostic tests, questionnaires and imaging techniques have been used clinically with some success, but a standardized approach is lacking. At present, guidelines for implant usage and patient management are ambiguous and inconsistent across health care authorities. To reduce and better manage the development of ALVAL, further research into the precise molecular mechanism(s) by which ALVAL develops is urgently needed. Identification of diagnostic and prognostic biomarkers for ALVAL is required, as are more standardized guidelines for surgery and patient management.

Survivorship of a Metal-on-Metal Total Hip Implant With Modular Titanium Adapter

BACKGROUND

Use of metal-on-metal (MoM) articulations in total hip arthroplasty (THA) has sharply declined due to high failure rates from metal-related complications. Although certain MoM designs have demonstrated only 46% survival, not all MoM designs have performed the same. The purpose of this study is to evaluate mid-term to long-term survival of a specific MoM implant with a modular titanium taper adapter.

METHODS

A retrospective review was performed on all patients who underwent primary THA at our center with the M²a-Magnum system (Zimmer Biomet, Warsaw, IN). Of 829 patients (956 hips) identified, 754 patients (869 hips) met inclusion criteria of signed research consent, minimum 2-year follow-up, and/or any revision surgery.

RESULTS

Mean follow-up was 11.0 years (range 2-16; ±3.5). Mean cup angle of inclination was 42.8° (range 24°-70°, ±6.3°), with 88.0% reconstructed within the 40° ± 10° safe zone. There were 64 revisions (7.36%): 7 (0.81%) septic and 57 (6.56%) aseptic. Of those, 32 (3.68%) were adverse reactions to metal debris. Kaplan-Meier survival free of revision for all causes was 88.6% at 16 years (95% confidence interval 86.8-90.4). Univariate analysis of risk factors for all-cause, aseptic, and adverse reaction to metal debris revision found no relationship with female gender, age ≥65 years, body mass index >30 kg/m², higher activity level, or inclination angle outlier.

CONCLUSION

The results of this study demonstrate a more favorable mid-term to long-term survivorship with this specific MoM implant compared to other designs. Although our institution no longer performs MoM THA, further investigation into differences in MoM implant designs is warranted.

Ten-year outcomes following a cohort of ASR XL total hip arthroplasties

AIMS

To determine the outcome at 10 years of a cohort of ASR XL total hip arthroplasties (THAs) and reasons for revision.

METHODS

Between November 2005 and May 2007, 122 ASR XL THAs were implanted. All patients had a routine review at 6 weeks and 1 year, followed by a review in 2009 because of clinical concern and thereafter annual review up to 10 years with MRI. Review also included functional scores, radiographs, pain scores and blood metal ions.

RESULTS

67 (54.9%) ASR XLs had been revised by 11.1 years. Reasons for revision included pain (89.6%), high levels of cobalt and chromium ions (50.7%) and radiographic or MRI changes (80.6%). All 3 factors were present in 23 (34.3%). Pain at 1 year did not predict revision, but pain at the 2009 review did. At 10 years the revised patients had an average Oxford Hip Score (OHS) of 25.38 (12-42) and the non-revised 23.61 (2-21), the difference was not significant (p = 0.48). 3 patients (4.5%) have had a further revision; 2 for a previously unrevised stem and the other for instability.

CONCLUSIONS

Our arthroplasty care practitioner service allowed us to identify increased pain and stop using the ASR XL over 3 years before the implant was recalled. The revised patients had similar functional outcome to those unrevised. Poorly performing implants need to be identified earlier.

What is the Level of Evidence Substantiating Commercial Payers' Coverage Policies for Total Joint Arthroplasty?

BACKGROUND

The prevalence of total joint arthroplasty (TJA) in the United States has drawn the attention of health care stakeholders. The payers have also used a variety of strategies to regulate the medical necessity of these procedures. The purpose of this study was to examine the level of evidence of the coverage policies being used by commercial payers in the United States.

METHODS

The references of the coverage policies of four commercial insurance companies were reviewed for type of document, level of evidence, applicability to a TJA population, and success of nonoperative treatment in patients with severe degenerative joint disease.

RESULTS

282 documents were reviewed. 45.8% were primary journal articles, 14.2% were level I or II, 41.2% were applicable to patients who were candidates for TJA, and 9.9% discussed the success of nonoperative treatment in patients who would be candidates for TJA.

CONCLUSION

Most of the references cited by commercial payers are of a lower level of scientific evidence and not applicable to patients considered to be candidates for TJA. This is relatively uniform across the reviewed payers. The dearth of high-quality literature cited by commercial payers reflects the lack of evidence and difficulty in conducting high level studies on the outcomes of nonoperative versus operative treatment for patients with severe, symptomatic osteoarthritis. Patients, surgeons, and payers would all benefit from such studies and we encourage professional societies to strive toward that end through multicenter collaboration.

An integrated benefit-risk assessment of cobalt-containing alloys used in medical devices: Implications for regulatory requirements in the European Union

In 2017, the European Union (EU) Committee for Risk Assessment (RAC) recommended the classification of metallic cobalt (Co) as Category 1B with respect to its carcinogenic and reproductive hazard potential and Category 2 for mutagenicity but did not evaluate the relevance of these classifications for patients exposed to Co-containing alloys (CoCA) used in medical devices. CoCA are inherently different materials from Co metal from a toxicological perspective and thus require a separate assessment. CoCA are biocompatible materials with a unique combination of properties including strength, durability, and a long history of safe use that make them uniquely suited for use in a wide-range of medical devices. Assessments were performed on relevant preclinical and clinical carcinogenicity and reproductive toxicity data for Co and CoCA to meet the requirements under the EU Medical Device Regulation triggered by the ECHA re-classification (adopted in October 2019 under the 14th Adaptation to Technical Progress to CLP) and to address their relevance to patient safety. The objective of this review is to present an integrated overview of these assessments, a benefit-risk assessment and an examination of potential alternative materials. The data support the conclusion that the exposure to CoCA in medical devices via clinically relevant routes does not represent a hazard for carcinogenicity or reproductive toxicity. Additionally, the risk for the adverse effects that are known to occur with elevated Co concentrations (e.g., cardiomyopathy) are very low for CoCA implant devices (infrequent reports often reflecting a unique catastrophic failure event out of millions of patients) and negligible for CoCA non-implant devices (not measurable/no case reports). In conclusion, the favorable benefit-risk profile also in relation to possible alternatives presented herein strongly support continued use of CoCA in medical devices.

A hazard evaluation of the reproductive/developmental toxicity of cobalt in medical devices

Cobalt (Co) is an essential element with human exposure occurring from the diet, supplement ingestion, occupational sources, and medical devices. The European Chemical Agency (ECHA) recently voted to classify Co metal as a Reproductive Hazard Category 1B; presumed human reproductive toxicant due to adverse testicular effects in male rodents. A weight of evidence evaluation of the preclinical reproductive and developmental toxicity studies and available clinical data was performed to critically evaluate the relevance of this proposed classification for Co in medical devices. Reproductive responses to Co are limited to the male testes and sperm function following high systemic exposure in rodents, only at Co concentrations/doses that result in overt toxicity (i.e., above the maximum tolerable dose (MTD)). The potential mechanisms of Co reproductive/developmental toxicity, including its indirect mode of action in the testes and relevance to humans, are discussed. The available preclinical and clincial evidence suggests that it would be more appropriate to classify Co as a Reproductive Hazard Category 2 compound: suspected human reproductive toxicant and, in the case of Co-containing medical devices, it should not be considered a reproductive hazard.

Best Practices: Best Imaging Modality for Surveillance of Metal-on-Metal Hip Arthroplasty

OBJECTIVE. Metal-on-metal hip arthroplasty has been shown to result in soft-tissue complications in some patients, making revision surgery necessary. Imaging is critical in the detection and surveillance of soft-tissue complications, which are collectively termed adverse reaction to metal debris (ARMD) and adverse local tissue reaction. Studies have investigated the use of ultrasound, MRI, and CT for detecting ARMD, and each modality has advantages and disadvantages. This article provides evidence-based recommendations for imaging surveillance of ARMD. CONCLUSION. Compared with ultrasound, MRI has been found to be a better imaging modality for surveillance of ARMD. In addition, MRI is not operator dependent, allows visualization of soft-tissue details, and allows more consistent measurement of fluid collections on follow-up examinations. Limitations of ultrasound include operator skill, the inability to visualize osseous structures, and the challenge of visualizing posterior soft tissues for synovitis and fluid collections in larger patients. Finally, CT is only useful for focused evaluation of osteolysis or periprosthetic fracture.

Pinnacle Ultamet metal-on-metal total hip arthroplasty survivorship: average 10-year follow-up

Background

It is unclear whether a connection exists between femoral head size, offset, neck length, and cup abduction angles, and rate of revision in metal-on-metal (MoM) total hip arthroplasty (THA) implant systems.

Methods

A retrospective review of MoM THA completed by a single surgeon with a single implant between 2003 and 2008 was conducted. Patient demographics, implant data, radiographs, and revision details were collected at follow-up. Incidence rates for revision and osteolysis were calculated in regard to the femoral head size, stem offset, neck length, and cup abduction angles.

Results

Six hundred and ninety two THAs were identified, with 79% of patients returning for a median follow-up of 10.3 years (interquartile range = 6.0-12.3). The median time to revision was 7.5 years (interquartile range = 5.3-9.9) among 27 total revision surgeries. The overall incidence rate of revision was 5.4 revisions per 1000 person-years, 3.0 revisions per 1000 person-years for adverse local tissue reaction. Hips with a cup abduction angle of ≤40° had revisions at nearly twice the rate of those with an angle of 41°-50° (incidence rate ratio = 1.98, 95% confidence interval: 0.92, 4.29). Hips with a 9 mm neck length had an increased rate of revision (incidence rate ratio = 5.94, 95% confidence interval: 1.33, 26.55) relative to those with a neck length of 0 mm. Rates of osteolysis were similar between implants of different head sizes, neck lengths and cup abduction angles.

Conclusions

MoM implant systems with longer necks and smaller cup abduction angles may lead to increased need for revision. Results from this study suggest a need for closer long-term follow-up of MoM THA systems.

Three Femoral Stem Designs Without Corrosion: A Review of 2095 Stems

Introduction

Corrosion at the head-neck interface of modular components in total hip arthroplasty (THA) has been reported as a cause of failure of modern total hip replacement implants. While this method of failure has been well described, it remains poorly understood. The purpose of this study is to review the three most commonly used uncemented femoral stems at our institution over the last fifteen years and to correlate any established risk factors with rates of revision, particularly corrosion.

Methods

We reviewed 2095 patients from March 2000 to September 2015 who underwent total hip arthroplasty with one of three uncemented femoral stem designs. All stems were made of a Ti6Al4V alloy with a 12/14 taper design. We included only those stems coupled with a CoCr head and a highly crosslinked polyethylene liner. We evaluated age, gender, body mass index (BMI), femoral head size, head length, neck angle and offset and correlated these to the incidence of all cause revision, as well as revision excluding infection.

Results

There were no recognized corrosion-related revisions identified. There was no association between age, BMI, gender, head length, neck angle and offset to all cause revision or revision with infection excluded (p>0.05). Femoral head size less than 32mm was associated with higher all cause revision rates (OR 4.60 (95% CI 1.8, 11.8)) and when excluding infection as a reason for revision (OR 4.94 (95% CI 1.7, 14.41)).

Conclusion

Over the last fifteen years, we have not identified any cases of corrosion with the three most commonly used femoral stems used at out institution. While we acknowledge that no femoral stem is immune to corrosion, certain femoral stem designs may be uniquely resistant to this mode of failure.

Level of Evidence

III.

Free Radical Production, Inflammation and Apoptosis in Patients Treated With Titanium Mandibular Fixations-An Observational Study

Despite high biocompatibility of titanium and its alloys, this metal causes various side effects in the human body. It is believed that titanium biomaterials may induce an innate/adaptive immune response. However, still little is known about changes caused by titanium mandible implants, particularly with regard to bone healing. The latest studies showed disturbances in the antioxidant barrier, increased oxidative/nitrosative stress, as well as mitochondrial abnormalities in the periosteum covering titanium mandible fixations; nevertheless, the impact of titanium implants on free radical production, inflammation, and mandible apoptosis are still unknown. Because severe inflammation and apoptosis are among the main factors responsible for disturbances in osteointegration as well as implant rejection, this study is the first to evaluate pro-oxidant enzymes, cytokines as well as pro- and anti-apoptotic proteins in the periosteum of patients with a broken jaw, treated with titanium miniplates and miniscrews. The study group consisted of 29 patients with double-sided fracture of the mandible body requiring surgical treatment. We found significantly higher activity of NADPH oxidase and xanthine oxidase as well as enhanced rate of free radical production in the periosteum of patients in the study group compared to the control group. The markers of inflammation [interleukin 1 (IL-1), interleukin 6 (IL-6), tumor necrosis factor α (TNF-α), transforming growth factor β (TGF-β) and β-glucuronidase (GLU)] as well as apoptosis [Bax, Bax/Bcl-2 ratio, caspase-3 (CAS-3) and nitric oxide (NO)] were significantly elevated in periosteum covering titanium fixations compared to the control group. In the study group, we also demonstrated an increased content of titanium on the periosteum surface, which positively correlated with CAS-3 activity. The study led us to the conclusion that titanium mandible implants increase the production of pro-inflammatory cytokines, and enhance free radical generation in the periosteum covering titanium miniplates and miniscrews. Additionally, exposure to Ti6Al4V titanium alloy induces apoptosis in the mandible periosteum. However, no clinical signs of the said phenomena have been observed.

Pleomorphic clinical spectrum of metallosis in total hip arthroplasty

PURPOSE

To summarize the biological effects of metal debris from hip arthroplasties which characterize a polymorphic clinical spectrum of local and remote manifestation.

METHODS

Retrospective study. Patient, implant, and surgical characteristics were collected, including implant survival, clinical manifestations, cause of arthroplasty revision or implant failure, and peri- and intra-operative complications. The primary endpoint was implant survivorship. Hip revision arthroplasty was decided considering clinical signs and symptoms, abnormal imaging (XR, MR, TC, echotomography, scintigraphy), and blood metal ion level. An ad hoc electronic form was used to collect demographic, epidemiological, and clinical variables. In-between group comparisons of quantitative variables were performed with the Student t test and the Mann-Whitney for parametric and non-parametric variables, respectively. Logistic regression analyses were carried out to assess the relationship between clinical and radiographic characteristics and stem and cup revision. Radiographic measurements of implant positioning validity and reliability were assessed using Krippendorff's alpha reliability coefficient. The statistical software STATA version 15 (StatsCorp, TX) was used to perform statistical computations.

RESULTS

In this MoM THA series, the most incident cause of implant failure was ARMD in 11 out of 14 (78.6%) patients. All clinical failure manifestations, revision surgery highlights, and intra-operative findings are reported.

CONCLUSIONS

The local adverse reactions include lesions of different clinical relevance from small asymptomatic soft tissue lesions to dramatic osteolysis, necrosis, effusion, and growing masses which can cause secondary pathological effects. Symptoms of systemic toxicity are rarely described but may have been largely unreported in literature. Despite the extensive literature on the topic, the patient's management is still uncertain and challenging. Every metallic implant (e.g., screws, plates, spinal instrumentations) has a potential local or systemic adverse effect. Organizing a national registry of arthroplasty should be mandatory, in order to collect data about the patients, the surgery, the implanted device (with a careful post-marketing tracking), and the follow-up for all the procedures performed at a national level. The data collected in the registry will allow to analyze the implant survival and to better recognize the undesirable and sometimes unexpected effects of different biomaterials on the whole body.

Adverse Local Tissue Reaction After a Metal-on-Metal Total Hip Prosthesis Without Elevated Serum Metal Ion Levels

In the 1990s, metal-on-metal (MoM) bearings were reintroduced in total hip arthroplasty (THA), having the proposed advantages of decreased wear and improved stability. However, catastrophic adverse local tissue reaction (ALTR) secondary to metal debris from both the bearing surface and the head-neck junction is a well-recognized complication. The measurement of metal ion levels in the serum is often a first-line test to identify failure of a MoM bearing. The authors describe a 70-year-old man who presented with a multiply revised MoM THA and a large periprosthetic fluid collection incidentally seen during computed tomography for renal nephrolithiasis. The patient reported painless, progressive swelling over the lateral aspect of the hip. An infectious workup including serum erythrocyte sedimentation rate, C-reactive protein, and intraarticular hip aspiration yielded negative results. Metal ion levels in the serum, including a minimally elevated cobalt level, were unremarkable, and metal-lymphocyte transformation testing yielded negative results. Radiographic imaging revealed progressive osteolysis around the proximal femur, and magnetic resonance imaging showed large fluid collections with irregular wall thickening surrounding the gluteal and iliopsoas musculature. At revision surgery, a large fluid collection and corrosion at the head-neck junction were present. Pathology specimens confirmed the presence of an ALTR. This report presents a previously undescribed case of an ALTR secondary to MoM THA in the absence of elevated serum metal ion levels. This indicates the necessity of considering all aspects of a patient's clinical presentation, imaging modalities, and laboratory testing in the evaluation and diagnosis of a symptomatic MoM THA. [Orthopedics. 2018; 41(3):e438-e441.].

Prospective, randomized multicenter study of cervical arthroplasty versus anterior cervical discectomy and fusion: 5-year results with a metal-on-metal artificial disc

OBJECTIVE

Seven cervical total disc replacement (TDR) devices have received FDA approval since 2006. These devices represent a heterogeneous assortment of implants made from various biomaterials with different biomechanical properties. The majority of these devices are composed of metallic endplates with a polymer core. In this prospective, randomized multicenter study, the authors evaluate the safety and efficacy of a metal-on-metal (MoM) TDR (Kineflex|C) versus anterior cervical discectomy and fusion (ACDF) in the treatment of single-level spondylosis with radiculopathy through a long-term (5-year) follow-up.

METHODS

An FDA-regulated investigational device exemption (IDE) pivotal trial was conducted at 21 centers across the United States. Standard validated outcome measures including the Neck Disability Index (NDI) and visual analog scale (VAS) for assessing pain were used. Patients were randomized to undergo TDR using the Kineflex|C cervical artificial disc or anterior cervical fusion using structural allograft and an anterior plate. Patients were evaluated preoperatively and at 6 weeks and 3, 6, 12, 24, 36, 48, and 60 months after surgery. Serum ion analysis was performed on a subset of patients randomized to receive the MoM TDR.

RESULTS

A total of 269 patients were enrolled and randomly assigned to undergo either TDR (136 patients) or ACDF (133 patients). There were no significant differences between the TDR and ACDF groups in terms of operative time, blood loss, or length of hospital stay. In both groups, the mean NDI scores improved significantly by 6 weeks after surgery and remained significantly improved throughout the 60-month follow-up (both p < 0.01). Similarly, VAS pain scores improved significantly by 6 weeks and remained significantly improved through the 60-month follow-up (both p < 0.01). There were no significant changes in outcomes between the 24- and 60-month follow-ups in either group. Range of motion in the TDR group decreased at 3 months but was significantly greater than the preoperative mean value at the 12- and 24-month follow-ups and remained significantly improved through the 60-month period. There were no significant differences between the 2 groups in terms of reoperation/revision surgery or device-/surgery-related adverse events. The serum ion analysis revealed cobalt and chromium levels significantly lower than the levels that merit monitoring.

CONCLUSIONS

Cervical TDR with an MoM device is safe and efficacious at the 5-year follow-up. These results from a prospective randomized study support that Kineflex|C TDR as a viable alternative to ACDF in appropriately selected patients with cervical radiculopathy.

Clinical trial registration no.: NCT00374413 (clinicaltrials.gov)

Metal-on-metal total hip arthroplasty is not associated with cardiac disease

AIMS

Many case reports and small studies have suggested that cobalt ions are a potential cause of cardiac complications, specifically cardiomyopathy, after metal-on-metal (MoM) total hip arthroplasty (THA). The impact of metal ions on the incidence of cardiac disease after MoM THA has not been evaluated in large studies. The aim of this study was to compare the rate of onset of new cardiac symptoms in patients who have undergone MoM THA with those who have undergone metal-on-polyethylene (MoP) THA.

PATIENTS AND METHODS

Data were extracted from the Standard Analytics Files database for patients who underwent MoM THA between 2005 and 2012. Bearing surface was selected using International Classification of Diseases ninth revision codes. Patients with a minimum five-year follow-up were selected. An age and gender-matched cohort of patients who underwent MoP THA served as a comparison group. New diagnoses of cardiac disease were collected during the follow-up period. Comorbidities and demographics were identified and routine descriptive statistics were used.

RESULTS

We identified 29 483 patients who underwent MoM THA and 24 175 matched patients who underwent MoP THA. Both groups had a mean Charlson comorbidity index score of 4. There were no statistically significant differences in 30 of 31 pre-existing comorbidities. Patients undergoing MoM THA had a slightly lower incidence of cardiac failure compared with those undergoing MoP THA at three years (6.60% versus 7.06%, odds ratio (OR) 0.93, 95% confidence interval (CI) 0.87 to 0.99) and four years (8.73% versus 9.49%, OR 0.91, 95% CI 0.86 to 0.97) postoperatively, with no difference in the incidence of new cardiac failure in between the groups at five years. There was no statistically significant difference in the incidence of arrhythmia, myocardial infarction and cardiomyopathy at any time between the two groups.

CONCLUSION

MoM THA is not associated with cardiac complications. Initial reports may have represented individual instances of cardiac disease in patients with a failing MoM articulation rather than an emerging epidemiological trend. Cite this article: Bone Joint J 2018;100-B:28-32.

Arthroprosthetic cobaltism associated with cardiomyopathy

Systemic cobaltism related to metal-on-metal total hip arthroplasty has been published in case reports and series with effects on the cardiac, neurologic, endocrine, and immunologic systems. This case report presents a 46-year-old male who underwent bilateral metal-on-metal total hip arthroplasty and subsequently developed cardiomyopathy requiring left ventricular assist device implantation. Intervention with bilateral revision to non-cobalt-containing implants resulted in improved cardiac function. This case report will alert clinicians to the presentation of this rare but devastating complication while also displaying improvement following revision total hip arthroplasty. It is our hope this case will aid in early recognition and intervention of this condition.

The Utility of Metal Ion Trends in Predicting Revision in Metal-on-Metal Total Hip Arthroplasty

BACKGROUND

There is a paucity of data examining metal ion levels over time.

METHODS

We retrospectively reviewed 59 patients (69 hips) with an articular surface replacement total hip arthroplasty. We reviewed prerevision cobalt and chromium concentrations over time.

RESULTS

Seventy-one percent of patients who were revised and had multiple ion measurements (12/17) demonstrated increasing cobalt ion levels or elevated ion levels over time. There was a trend toward an elevated risk of revision for increasing cobalt and chromium levels starting at 12 and 4 ppb, respectively; this was significant for chromium levels above 7 ppb (hazard ratio 22.35, P = .001). Similarly, there was a trend toward an elevated risk of pseudotumor formation for increasing cobalt and chromium levels starting at 5 and 2.5 ppb, respectively; this was significant for cobalt levels above 7 ppb (hazard ratio 6.88, P = .027).

CONCLUSION

In this paper, cobalt and chromium levels levels above 5 and 2.5 ppb started to demonstrate an increased risk of ARMD, and should be considered as a lower cutoff for discussion with patients about the potential for future revision.

Astaxanthin mitigates cobalt cytotoxicity in the MG-63 cells by modulating the oxidative stress

Background

With the re-popularity of metal-on-metal (MoM) bearing in recent years, the cobalt toxicity has been a cause for concern in the total hip replacement surgery by both physicians and patients.

Methods

MG-63 cell line was cultured in vitro and incubated with cobalt (II) chloride (CoCl₂) and/or with astaxanthin (ASX) for 24 h. MTT assay was conducted to evaluate the cell viability after cobalt exposure and ASX treatment. Fluorescence-activated cell sorting (FACS) analysis was performed to examine the reactive oxygen species (ROS) level. Quantitative real-time polymerase chain reaction (PCR) was adopted to determine the mRNA levels of related targets. And western blot analysis was used to examine the protein expressions. One-way ANOVA with posttest Newman-Keuls multiple comparisons was adopted to analysis all the obtained data.

Results

In the current study, ASX exhibited significant protective effect against the Co(II)-induced cytotoxicity in MG-63 cell line. We also found that ASX protected the cells against Co-induced apoptosis by regulating the expression of Bcl-2 family proteins. Besides, heme oxygenase 1 (HO-1) could be activated by Co exposure; ASX treatment significantly inhibited HO-1 activation, suppressing the oxidative stress induced by Co exposure. Moreover, c-Jun N-terminal Kinase (JNK) phosphorylation was shown to participate in the signaling pathway of the protective effect of ASX. However, knockdown of JNK expression by siRNA transfection or JNK inhibitor SP600125 treatment did not affect the protective effect of ASX against cobalt cytotoxicity in MG-63 cells.

Conclusions

ASX mitigated cobalt cytotoxicity in the MG-63 cells by modulating the oxidative stress. And ASX could be a promising therapy against cobalt toxicity in the hip articulation surgery.

Electronic supplementary material

The online version of this article (doi:10.1186/s40360-017-0166-1) contains supplementary material, which is available to authorized users.

Management Guidelines for Metal-on-metal Hip Resurfacing Arthroplasty: A Strategy on Followup

Despite the initial promise of metal-on-metal (MoM) implants as the ideal bearing surface for hip replacements and resurfacings, high short term failure rates due to an adverse reaction to metal debris (ARMD) have led to a dramatic reduction in the number of MoM implants used in the modern era. With over one million patients worldwide having undergone hip operations utilizing a MoM bearing surface, the long term outcomes for such patients remains unknown, and there is much debate as to the most effective management of these patients. Although several regulatory bodies have released guidelines on the management of patients with MoM hips, these recommendations remain open to interpretation, and the most effective management for these patients remains unclear. The aim of this review is to compare the current guidelines for managing patients with MoM hips and also to discuss established ARMD risk factors, evidence regarding the optimum management for patients with MoM hips, and the indications for revision surgery. Furthermore, although specialized laboratory tests and imaging can be used to facilitate clinical decision making, over-reliance on any single tool should be avoided in the decision making process, and surgeons should carefully consider all findings when determining the most appropriate course of action.

Cytotoxicity and genotoxicity in liver cells induced by cobalt nanoparticles and ions

Objectives

The cytotoxicity induced by cobalt ions (Co²⁺) and cobalt nanoparticles (Co-NPs) which released following the insertion of a total hip prosthesis, has been reported. However, little is known about the underlying mechanisms. In this study, we investigate the toxic effect of Co²⁺ and Co-NPs on liver cells, and explain further the potential mechanisms.

Methods

Co-NPs were characterised for size, shape, elemental analysis, and hydrodynamic diameter, and were assessed by Transmission Electron Microscope, Scanning Electron Microscope, Energy Dispersive X-ray Spectroscopy and Dynamic Light Scattering. BRL-3A cells were used in this study. Cytotoxicity was evaluated by MTT and lactate dehydrogenase release assay. In order to clarify the potential mechanisms, reactive oxygen species, Bax/Bcl-2 mRNA expression, IL-8 mRNA expression and DNA damage were assessed on BRL-3A cells after Co²⁺ or Co-NPs treatment.

Results

Results showed cytotoxic effects of Co²⁺ and Co-NPs were dependent upon time and dosage, and the cytotoxicity of Co-NPs was greater than that of Co²⁺. In addition, Co-NPs elicited a significant (p < 0.05) reduction in cell viability with a concomitant increase in lactic dehydrogenase release, reactive oxygen species generation, IL-8 mRNA expression, Bax/Bcl-2 mRNA expression and DNA damage after 24 hours of exposure.

Conclusion

Co-NPs induced greater cytotoxicity and genotoxicity in BRL-3A cells than Co²⁺. Cell membrane damage, oxidative stress, immune inflammation and DNA damage may play an important role in the effects of Co-NPs on liver cells.

Cite this article: Y. K. Liu, X. X. Deng, H.L. Yang. Cytotoxicity and genotoxicity in liver cells induced by cobalt nanoparticles and ions. Bone Joint Res 2016;5:461–469. DOI: 10.1302/2046-3758.510.BJR-2016-0016.R1.

Patient-reported outcomes in cemented and uncemented total hip replacements

INTRODUCTION

Data from national registries have favored the use of cemented fixation in total hip replacement (THR) while other reports show no significant differences in implant survival between cemented and uncemented fixation using modern implants. It is important to investigate whether the method of fixation itself may affect patient-reported outcomes. Hence, this study sought to analyse if patient-reported outcomes measures (PROMs) differ depending on the type of fixation.

METHODS

Data was used from the follow-up programme of the Swedish Hip Arthroplasty Register which comprises the EQ-5D, a visual analogue scale (VAS) on hip pain, as well as a VAS addressing satisfaction with the outcome of the hip replacement.3,118 patients with uncemented THR due to primary osteoarthritis performed from 2002 to 2011 with complete 1-year follow-up were included in the study. A control group of patients with cemented THR (n = 3,118) were selected by matching on age, gender, Charnley class, and preoperative health-related quality of life.

RESULTS

After adjusting for age, gender, Charnley class, and baseline PROMs, multivariate linear regression analyses showed that uncemented fixation is associated with a larger improvement in EQ-5D index (B = 0.03, 95% CI 0.019, 0.041), EQ VAS (B = 2.58, 95% CI 1.65, 3.51), greater pain relief (B = -2.68, 95% CI -3.54, -1.82) and superior patient satisfaction (B = -2.56, 95% CI -3.52, -1.60) (all p&lt;0.001).

DISCUSSIONS

This study demonstrates that uncemented fixation is associated with better patient-reported outcomes. Factors unrelated to implant fixation, such as performance or selection bias, may also contribute to the difference.

Is Metal-On-Metal Total Hip Arthroplasty Associated With Neurotoxicity?

BACKGROUND

Isolated case reports in the literature describe systemic neurologic side effects associated with metal-on-metal (MOM) bearing surfaces, yet the incidence of these effects have not been evaluated beyond individual cases. The purpose of this study was to compare new diagnoses of these side effects described in isolated cases in large patient cohorts of MOM vs metal on polyethylene (MOP).

METHODS

We queried the entire Medicare database from 2005 to 2012. Total hip arthroplasty (THA) and bearing surface were determined using International Classification of Diseases, 9th revision procedure codes. Patients with 5-year follow-up were selected. Using International Classification of Diseases, 9th revision codes, we identified new diagnoses of previously reported neurologic side effects: peripheral neuropathy, sensorineural hearing loss, visual impairment, paresthesias, tinnitus, and vertigo. Comorbidities and demographics were collected. Odds ratios, CIs, and P values were calculated.

RESULTS

Overall, 29,483 MOM THAs and 23,587 age- and gender-matched MOP THAs were identified. The average Charlson Comorbidity Index was 5 for both groups. MOM and MOP patients had 26 of 30 identical prevalence of Elixhauser-measure comorbidities. There was no statistically significant difference in new diagnoses of any of the side effects at any time point between the 2 groups over 5 years.

CONCLUSION

This study represents, to our knowledge, the first longitudinal analysis of systemic neurotoxicity after THA in a large cohort of patients. The results of our study suggest that on the large scale, neurologic side effects previously described do not occur as a common attributable complication. Rather, these cases may be due to individual patient hypersensitivity to metal ions.

Increased Mortality in Metal-on-Metal versus Non-Metal-on-Metal Primary Total Hip Arthroplasty at 10 Years and Longer Follow-Up: A Systematic Review and Meta-Analysis

IMPORTANCE

There are concerns about increased mortality in patients with metal-on-metal bearings in total hip arthroplasty (THA).

OBJECTIVE

To determine the mortality and the morbidity in patients with metal-on-metal articulations (MOM THA) compared to patients with non-metal-on-metal articulations (non-MOM THA) after primary total hip arthroplasty.

DATA SOURCES

Search of PubMed, MEDLINE, EMBASE, Web of Science, Cochrane, CINAHL, AcademicSearchPremier, ScienceDirect, Wiley and clinical trial registers through March 2015, augmented by a hand search of references from the included articles. No language restrictions were applied.

STUDY SELECTION

Two reviewers screened and identified randomised controlled trials and observational studies of primary total hip arthroplasty comparing MOM THA with non-MOM THA.

DATA EXTRACTION AND SYNTHESIS

Two reviewers independently extracted study data and assessed risk of bias. Risk differences (RD) were calculated with random effect models. Meta-regression was used to explore modifying factors.

MAIN OUTCOMES AND MEASURES

Difference in mortality and difference in morbidity expressed as revisions and medical complications between patients with MOM THA and non-MOM THA.

RESULTS

Forty-seven studies were included, comprising 4,000 THA in randomised trials and over 500,000 THA in observational studies. For mortality, random effects analysis revealed a higher pooled RD of 0.7%, 95%, confidence interval (CI) [0.0%, 2.3%], I-square 42%; the heterogeneity was explained by differences in follow-up. When restricted to studies with long term follow-up (i.e. 10 years or more), the RD for mortality was 8.5%, 95%, CI [5.8%, 11.2%]; number needed to treat was 12. Further subgroup analyses and meta-regression random effects models revealed no evidence for other moderator variables (study level covariates, e.g. resurfacing vs. non-resurfacing MOM) than follow-up duration. The quality of the evidence presented in this meta-analysis was characterized as moderate according to the CLEAR-NPT (for non-pharmacological trials) and Cochrane risk of bias Table.

CONCLUSIONS AND RELEVANCE

Meta-analysis suggests there may be an increased long-term risk of mortality and revision surgery for patients with MOM THA compared to patients with non-MOM THA.

REGISTRATION

PROSPERO 2014:CRD42014007417.

A Miniaturized Therapeutic Chromophore for Multiple Metal Pollutant Sensing, Pathological Metal Diagnosis and Logical Computing

The efficacy of a miniaturized unimolecular analytic system is illustrated. The easily accessible therapeutic chromophore "temoporfin", which responds differentially to bound metals at multiple wavelengths of Q-band absorption using chemometric analysis, expeditiously detects and discriminates a wide range of metals regarded as priority pollutants in water and hence may also be used for diagnosis of medically relevant metals in human urine. The molecule was further investigated as an electronic logic device, e.g. keypad lock device, to authorize multiple highly secure chemical passwords for information protection.

Hydrogels as a Replacement Material for Damaged Articular Hyaline Cartilage

Hyaline cartilage is a strong durable material that lubricates joint movement. Due to its avascular structure, cartilage has a poor self-healing ability, thus, a challenge in joint recovery. When severely damaged, cartilage may need to be replaced. However, currently we are unable to replicate the hyaline cartilage, and as such, alternative materials with considerably different properties are used. This results in undesirable side effects, including inadequate lubrication, wear debris, wear of the opposing articular cartilage, and weakening of the surrounding tissue. With the number of surgeries for cartilage repair increasing, a need for materials that can better mimic cartilage, and support the surrounding material in its typical function, is becoming evident. Here, we present a brief overview of the structure and properties of the hyaline cartilage and the current methods for cartilage repair. We then highlight some of the alternative materials under development as potential methods of repair; this is followed by an overview of the development of tough hydrogels. In particular, double network (DN) hydrogels are a promising replacement material, with continually improving physical properties. These hydrogels are coming closer to replicating the strength and toughness of the hyaline cartilage, while offering excellent lubrication. We conclude by highlighting several different methods of integrating replacement materials with the native joint to ensure stability and optimal behaviour.

Metal-on-Metal Total Hip Arthroplasty: Patient Evaluation and Treatment

Metal-on-metal (MoM) hip articulations were thought to represent a biologic and biomechanically favorable alternative to conventional metal-on-polyethylene total hip arthroplasty implants. However, concerns emerged when registry data reported significantly higher failure rates associated with MoM implants compared with other contemporary hip implants. These high implant failure rates have been attributed to the release of metal particles into the periprosthetic space, creating macroscopic necrosis; corrosive osteolysis; large, sterile hip effusions; and periprosthetic solid and cystic masses (ie, pseudotumors)-a spectrum of findings termed adverse reaction to metal debris. A thorough clinical history and physical examination, along with laboratory data and imaging surveillance of these patients, is critical for appropriate diagnosis and treatment. The decision to perform revision hip arthroplasty of a metal-on-metal implant is multifactorial and should be based on documented, objective clinical indications. A systematic and objective approach to this evaluation and treatment is essential to optimize the care of patients who undergo total hip arthroplasty with MoM implants.

Total hip replacement and surface replacement for the treatment of pain and disability resulting from end-stage arthritis of the hip (review of technology appraisal guidance 2 and 44): systematic review and economic evaluation

BACKGROUND

Total hip replacement (THR) involves the replacement of a damaged hip joint with an artificial hip prosthesis. Resurfacing arthroplasty (RS) involves replacement of the joint surface of the femoral head with a metal surface covering.

OBJECTIVES

To undertake clinical effectiveness and cost-effectiveness analysis of different types of THR and RS for the treatment of pain and disability in people with end-stage arthritis of the hip, in particular to compare the clinical effectiveness and cost-effectiveness of (1) different types of primary THR and RS for people in whom both procedures are suitable and (2) different types of primary THR for people who are not suitable for hip RS.

DATA SOURCES

Electronic databases including MEDLINE, EMBASE, The Cochrane Library, Current Controlled Trials and UK Clinical Research Network (UKCRN) Portfolio Database were searched in December 2012, with searches limited to publications from 2008 and sample sizes of ≥ 100 participants. Reference lists and websites of manufacturers and professional organisations were also screened.

REVIEW METHODS

Systematic reviews of the literature were undertaken to appraise the clinical effectiveness and cost-effectiveness of different types of THR and RS for people with end-stage arthritis of the hip. Included randomised controlled trials (RCTs) and systematic reviews were data extracted and risk of bias and methodological quality were independently assessed by two reviewers using the Cochrane Collaboration risk of bias tool and the Assessment of Multiple Systematic Reviews (AMSTAR) tool. A Markov multistate model was developed for the economic evaluation of the technologies. Sensitivity analyses stratified by sex and controlled for age were carried out to assess the robustness of the results.

RESULTS

A total of 2469 records were screened of which 37 were included, representing 16 RCTs and eight systematic reviews. The mean post-THR Harris Hip Score measured at different follow-up times (from 6 months to 10 years) did not differ between THR groups, including between cross-linked polyethylene and traditional polyethylene cup liners (pooled mean difference 2.29, 95% confidence interval -0.88 to 5.45). Five systematic reviews reported evidence on different types of THR (cemented vs. cementless cup fixation and implant articulation materials) but these reviews were inconclusive. Eleven cost-effectiveness studies were included; four provided relevant cost and utility data for the model. Thirty registry studies were included, with no studies reporting better implant survival for RS than for all types of THR. For all analyses, mean costs for RS were higher than those for THR and mean quality-adjusted life-years (QALYs) were lower. The incremental cost-effectiveness ratio for RS was dominated by THR, that is, THR was cheaper and more effective than RS (for a lifetime horizon in the base-case analysis, the incremental cost of RS was £11,284 and the incremental QALYs were -0.0879). For all age and sex groups RS remained clearly dominated by THR. Cost-effectiveness acceptability curves showed that, for all patients, THR was almost 100% cost-effective at any willingness-to-pay level. There were age and sex differences in the populations with different types of THR and variations in revision rates (from 1.6% to 3.5% at 9 years). For the base-case analysis, for all age and sex groups and a lifetime horizon, mean costs for category E (cemented components with a polyethylene-on-ceramic articulation) were slightly lower and mean QALYs for category E were slightly higher than those for all other THR categories in both deterministic and probabilistic analyses. Hence, category E dominated the other four categories. Sensitivity analysis using an age- and sex-adjusted log-normal model demonstrated that, over a lifetime horizon and at a willingness-to-pay threshold of £20,000 per QALY, categories A and E were equally likely (50%) to be cost-effective.

LIMITATIONS

A large proportion of the included studies were inconclusive because of poor reporting, missing data, inconsistent results and/or great uncertainty in the treatment effect estimates. This warrants cautious interpretation of the findings. The evidence on complications was scarce, which may be because of the absence or rarity of these events or because of under-reporting. The poor reporting meant that it was not possible to explore contextual factors that might have influenced study results and also reduced the applicability of the findings to routine clinical practice in the UK. The scope of the review was limited to evidence published in English in 2008 or later, which could be interpreted as a weakness; however, systematic reviews would provide summary evidence for studies published before 2008.

CONCLUSIONS

Compared with THR, revision rates for RS were higher, mean costs for RS were higher and mean QALYs gained were lower; RS was dominated by THR. Similar results were obtained in the deterministic and probabilistic analyses and for all age and sex groups THR was almost 100% cost-effective at any willingness-to-pay level. Revision rates for all types of THR were low. Category A THR (cemented components with a polyethylene-on-metal articulation) was more cost-effective for older age groups. However, across all age-sex groups combined, the mean cost for category E THR (cemented components with a polyethylene-on-ceramic articulation) was slightly lower and the mean QALYs gained were slightly higher. Category E therefore dominated the other four categories. Certain types of THR appeared to confer some benefit, including larger femoral head sizes, use of a cemented cup, use of a cross-linked polyethylene cup liner and a ceramic-on-ceramic as opposed to a metal-on-polyethylene articulation. Further RCTs with long-term follow-up are needed.

STUDY REGISTRATION

This study is registered as PROSPERO CRD42013003924.

FUNDING

The National Institute for Health Research Health Technology Assessment programme.

Blood metal ions after hybrid metal-on-polyethylene Exeter-Trident total hip replacement

Background

Metal-on-metal total hip replacements (THRs) with large femoral heads have been associated with elevated levels of cobalt (Co) and chromium (Cr), which have been attributed to high levels of wear at the articular surface. Our unit recently published data showing a significant increase in the mean levels of Co ions in patients with a 36-mm diameter femoral head with the metal-on-polyethylene Trident−Accolade system. The aim of this study is to assess the levels of Co and Cr in the Exeter−Trident hybrid system, as similar findings would raise concern over the V40 taper trunnion.

Materials and methods

The study included 83 patients (45 male and 38 female with a mean age of 75.6 years) who received Exeter−Trident hybrid metal-on-polyethylene THRs. The patients were then divided into two groups according to the diameter of the femoral head used—38 patients in the 28-mm group (control), and 45 in the 36-mm (experimental) group. Serum levels of blood Co and Cr were analysed for all recruited patients.

Results

In the control group (28-mm femoral head) all Co and Cr values were normal (under the abnormal threshold), as were the experimental group (36-mm femoral head). The data values were below <10 nmol and <40 nmol for Co and Cr, respectively.

Conclusion

Since the National Joint Registry (NJR) states that the Exeter femoral stem is the commonest cemented femoral stem prosthesis used in the UK, we found it imperative that these results are documented given the corresponding findings in the Trident−Accolade system in our previous study. This study provides relative reassurance that the issue does not lie with the V40 taper trunnion, but raises suspicion that the issue may be with the titanium Accolade stem with large diameter femoral heads.

Level of evidence III.

The increase in cobalt release in metal-on-polyethylene hip bearings in tests with third body abrasives

Hypersensitivity reactions in patients receiving metal-on-metal hip replacements have been attributed to corrosion products as observed by elevated cobalt and chromium ions in the blood. Although the majority of cases are reported in metal-on-metal, incidences of these reactions have been reported in the metal-on-polyethylene patient population. To date, no in vitro study has considered cobalt release for this bearing combination. This study considered four 28 mm and seven 52 mm diameter metal-on-polyethylene bearings tested following ISO standard hip simulator conditions as well as under established abrasive conditions. These tests showed measurable cobalt in all bearings under standard conditions. Cobalt release, as well as polyethylene wear, increased with diameter, increasing from 52 to 255 ppb. The introduction of bone cement particles into the articulation doubled polyethylene wear and cobalt release while alumina particles produced significant damage on the heads demonstrated by cobalt levels of 70,700 ppb and an increased polyethylene wear from a mean value of 9–160 mm³/mc. Cobalt release was indicative of head damage and correlated with polyethylene wear at the next gravimetric interval. The removal of third body particles resulted in continued elevated cobalt levels in the 52 mm diameter bearings tested with alumina compared to standard conditions but the bearings tested with bone cement particles returned to standard levels. The polyethylene wear in the bone cement tested bearings also recovered to standard levels, although the alumina tested bearings continued to wear at a higher rate of 475 mm³/mc. Cobalt release was shown to occur in metal-on-polyethylene bearings indicating damage to the metal head resulting in increased polyethylene wear. While large diameter metal-on-polyethylene bearings may provide an increased range of motion and a reduced dislocation risk, increased levels of cobalt are likely to be released and this needs to be fully considered before being widely adopted.

Taperosis

Tribocorrosion at the head–neck taper interface – so-called ‘taperosis’ – may be a source of metal ions and particulate debris in metal-on-polyethylene total hip arthroplasty (THA).

We examined the effect of femoral head length on fretting and corrosion in retrieved head–neck tapers in vivo for a minimum of two years (mean 8.7 years; 2.6 to 15.9). A total of 56 femoral heads ranging from 28 mm to 3 mm to 28 mm + 8 mm, and 17 femoral stems featuring a single taper design were included in the study. Fretting and corrosion were scored in three horizontally oriented concentric zones of each taper by stereomicroscopy.

Head length was observed to affect fretting (p = 0.03), with 28 mm + 8 mm femoral heads showing greater total fretting scores than all other head lengths. The central zone of the femoral head bore taper was subject to increased fretting damage (p = 0.01), regardless of head length or stem offset. High-offset femoral stems were associated with greater total fretting of the bore taper (p = 0.04).

Increased fretting damage is seen with longer head lengths and high-offset femoral stems, and occurs within a central concentric zone of the femoral head bore taper. Further investigation is required to determine the effect of increased head size, and variations in head–neck taper design.

Cite this article: Bone Joint J 2015; 97-B:911–16.

Metal ion levels post primary unilateral Exeter total hip arthroplasty

BACKGROUND

Metal ion release is common following total hip arthroplasty, yet postoperative levels have not been defined for most stems currently used in clinical practice.

AIM

To assess metal ion release in the serum of patients with well functioning unilateral Exeter V40 primary total hip arthroplasties one year after surgery.

METHODS

Whole blood chromium and serum cobalt levels were measured in 20 patients following primary total hip arthroplasty with the Exeter V40 stem and a variety of acetabular components one year after surgery.

RESULTS

Whole blood chromium levels were within the normal range (10-100 nmol/L), with a single mild elevation of serum cobalt (normal <20 nmol/L).

CONCLUSIONS

In well functioning primary unilateral total hip arthroplasty using the Exeter V40 stem with a variety of acetabular components one year post surgery, whole blood chromium levels are normal and serum cobalt elevations are rare and mild.

Metal release and metal allergy after total hip replacement with resurfacing versus conventional hybrid prosthesis

BACKGROUND

Metal-on-metal (MOM) total hip arthroplasties were reintroduced because of the problems with osteolysis and aseptic loosening related to polyethylene wear of early metal-on-polyethylene (MOP) arthroplasties. The volumetric wear rate has been greatly reduced with MOM arthroplasties; however, because of nano-size wear particles, the absolute number has been greatly increased. Thus, a source of metal ion exposure with the potential to sensitize patients is present. We hypothesized that higher amounts of wear particles result in increased release of metal ions and ultimately lead to an increased incidence of metal allergy.

METHODS

52 hips in 52 patients (median age 60 (51-64) years, 30 women) were randomized to either a MOM hip resurfacing system (ReCap) or a standard MOP total hip arthoplasty (Mallory Head/Exeter). Spot urine samples were collected preoperatively, postoperatively, after 3 months, and after 1, 2, and 5 years and tested with inductively coupled plasma-sector field mass spectrometry. After 5 years, hypersensitivity to metals was evaluated by patch testing and lymphocyte transformation assay. In addition, the patients answered a questionnaire about hypersensitivity.

RESULTS

A statistically significant 10- to 20-fold increase in urinary levels of cobalt and chromium was observed throughout the entire follow-up in the MOM group. The prevalence of metal allergy was similar between groups.

INTERPRETATION

While we observed significantly increased levels of metal ions in the urine during the entire follow-up period, no difference in prevalence of metal allergy was observed in the MOM group. However, the effect of long-term metal exposure remains uncertain.

Failure of total hip implants: metals and metal release in 52 cases

BACKGROUND

The pathogenesis of total joint replacement failure is multifactorial. One hypothesis suggests that corrosion and wear of alloys result in metal ion release, which may then cause sensitization and even implant failure, owing to the acquired immune reactivity.

OBJECTIVES

To assess cobalt, nickel and chromium(VI) release from, and the metal composition of, failed metal-on-ethylene total hip replacements.

MATERIALS/METHODS

Implant components from 52 revision cases were evaluated with spot tests for free nickel, cobalt, and chromium (VI) ions. Implant composition was determined with X-ray fluorescence spectroscopy, and information on the reason for revision and complications in relation to surgery was collected from the medical charts when possible (72%). For 10 implants, corrosion was further characterized with scanning electron microscopy.

RESULTS

We detected cobalt release from three of 38 removed femoral heads and from one of 24 femoral stems. Nickel release was detected from one of 24 femoral stems. No chromium(VI) release was detected.

CONCLUSIONS

We found that cobalt and nickel were released from some failed total hip arthroplasties, and corrosion was frequently observed. Metal ions and particles corroded from metal-on-polyethylene may play a role in the complex aetiopathology of implant failure.

A painful soft tissue mass secondary to impingement of a metal on polyethylene bearing total hip arthroplasty

A 60-year-old woman underwent a metal on polyethylene total hip replacement. The patient experienced pain and sustained multiple dislocations over the following 2 years and was referred for consideration of revision surgery. At the time of revision surgery it was found that there was a significant amount of polyethylene wear likely to have arisen as a result of the neutral cup placement and subsequent anterior impingement. A large cystic mass was excised and on histology was found to contain tissue with a lymphocytic infiltrate with a large amount of intracellular birefringent debris, consistent with polyethylene. The appearance of such masses is well reported as pseudotumours in metal-on-metal hip replacements but as yet their aetiology is unknown. We believe that the formation of the mass in this case could represent a model by which these pseudotumours occur.

Metal ion levels after metal-on-metal total hip arthroplasty: a five-year, prospective randomized trial

BACKGROUND

The U.S. Food and Drug Administration has requested post-market surveillance data, including data on metal ion levels, regarding metal-on-metal total hip arthroplasty. We performed a prospective, randomized study of metal ion levels in erythrocytes, serum, and whole blood at five years after 28 and 36-mm metal-on-metal and 28-mm metal-on-polyethylene total hip arthroplasty.

METHODS

One hundred and five enrolled patients were randomized equally to the three bearing surface options and were blinded with regard to their treatment group. Metal ion measurements and clinical evaluations were performed at regular intervals.

RESULTS

Cobalt and chromium ion levels in all blood sample types at the five-year time point were significantly lower in the metal-on-polyethylene group than in each of the two metal-on-metal groups (p < 0.001) with the exception of chromium in erythrocytes (p = 0.194). Cobalt in serum (p = 0.029) and erythrocytes (p = 0.002) showed significant increases from two to five years in the 36-mm metal-on-metal group; similar increases were not seen in the 28-mm metal-on-metal group. At five years, five patients in the 36-mm metal-on-metal group and none in the 28-mm metal-on-metal group had cobalt or chromium levels of >7 ppb. Correlations among levels in serum, erythrocyte, and whole blood were stronger for cobalt than for chromium. One patient in the 36-mm metal-on-metal group underwent revision because of an adverse local tissue reaction.

CONCLUSIONS

The 36-mm metal-on-metal bearing underperformed the 28-mm metal-on-metal bearing with respect to metal ion levels. The authors are closely following all patients treated with metal-on-metal total hip arthroplasty.

Effects and blood concentrations of cobalt after ingestion of 1 mg/d by human volunteers for 90 d

BACKGROUND

Over-the-counter cobalt supplements are available for sale in the United States, but little is known regarding their clinical effects and biokinetic distribution with long-term use.

OBJECTIVE

We assessed blood kinetics, biochemical responses, and clinical effects in 5 adult men and 5 adult women who voluntarily ingested ∼ 1.0 mg Co/d (0.080-0.19 mg Co · kg⁻¹ · d⁻¹) of a commercially available cobalt supplement over a 3-mo period.

DESIGN

Volunteers were instructed to take the cobalt dietary supplement in the morning according to the manufacturer's label. Blood samples were collected and analyzed for a number of biochemical variables before, during, and after dosing. Hearing, vision, cardiac, and neurologic functions were also assessed in volunteers before, during, and after dosing.

RESULTS

After ∼ 90 d of dosing, mean cobalt blood concentrations were lower in men than in women. Mean cobalt whole blood and serum concentrations in men were 20 μg/L (range: 12-33 μg/L) and 25 μg/L (range: 15-46 μg/L), respectively. In women, mean cobalt whole blood and serum concentrations were 53 μg/L (range: 6-117 μg/L) and 71 μg/L (range: 9-149 μg/L), respectively. Estimated red blood cell (RBC) cobalt concentrations suggested that cobalt was sequestered in RBCs during their 120-d life span, which resulted in a slower whole blood clearance compared with serum. The renal clearance of cobalt increased with the serum concentration and was, on average, lower in women (3.5 ± 1.3 mL/min) than in men (5.5 ± 1.9 mL/min). Sex-specific differences were observed in cobalt absorption and excretion. There were no clinically significant changes in biochemical, hematologic, and clinical variables assessed in this study.

CONCLUSION

Peak cobalt whole blood concentrations ranging between 9.4 and 117 μg/L were not associated with clinically significant changes in basic hematologic and clinical variables.

Systemic contact dermatitis and allergy to biomedical devices

Systemic contact dermatitis (SCD) refers to a skin condition where an individual who is cutaneously sensitized to an allergen will subsequently react to that same allergen or a cross-reacting allergen via the systemic route. It occurs to allergens including metals, medications, and foods. There has been recent interest in metal allergy as it relates to the implantation of devices such as orthopedic, dental, cardiac, and gynecologic implants. This review will briefly address all causes of systemic contact dermatitis with a special and expanded focus on metal implant allergy. We present literature on SCD to various metal biomedical devices, patch testing for diagnosis of metal allergy pre and post implantation and treatment.

Does femoral neck to cup impingement affect metal ion levels in hip resurfacing?

BACKGROUND

Impingement of the femoral neck with the acetabular component after metal-on-metal hip resurfacing arthroplasty (HRA) is a possible cause of edge loading and accelerated bearing wear. No attempt has been made to correlate radiographic impingement signs and blood metal ion levels.

QUESTIONS/PURPOSES

We (1) compared serum cobalt (CoS) and chromium (CrS) concentrations between patients with and without radiographic impingement signs treated with unilateral HRA, (2) determined whether divot depth on the femoral neck correlated with CoS and CrS, and (3) assessed the predictive value of radiographic impingement signs for high levels of CoS and CrS.

METHODS

A retrospective radiographic review of 141 patients with CoS and CrS analyses yielded 21 patients with and 120 without radiographic impingement signs (controls). Radiographic measurements included divot depth and orientation of the acetabular component to compute the contact patch to rim distance, a measure of functional head coverage. We defined a patient as having radiographic impingement signs if a remodeling of the femoral neck cortex showed a depression matching the predicted path of an impinging acetabular component. CoS and CrS were analyzed by inductively coupled plasma mass spectrometry and the radiographs were taken within 12 months of the last blood draw.

RESULTS

Median CoS and CrS were greater in the impingement group than in controls in patients with less than 10-mm contact patch to rim distances. Divot depth did not correlate with CoS or CrS. In predicting elevated ion levels (≥ 7 μg/L), the presence of a radiographic impingement sign showed a sensitivity of 50% for CoS and 33% for CrS and a specificity of 87% for both CoS and CrS.

CONCLUSIONS

Radiographic impingement signs influenced CoS and CrS only when the functional head coverage was insufficient due to poor socket positioning. Radiographic impingement signs alone were not a good predictor of elevated metal ion levels.

Implants for total hip arthroplasty

This article is a comprehensive review of the published literature on total hip replacement design. It seeks to provide a nonbiased view of the technology related to total hip implants and bearing surfaces. Implant designs and fixation methods are discussed with summaries of their respective long-term outcome studies. Fixation methods include cemented, cementless and hybrid techniques and are explained and presented with current outcome data and their respective failure modes that have promoted new technological development. The current data point toward cementless acetabular fixation as being superior to cemented fixation. As for stem fixation, there are good data to suggest that either method of fixation is acceptable in the proper setting. Also included in this article is a brief review of bearing surfaces and hip biomechanics.

In vitro macrophage response to nanometer-size chromium oxide particles

An increasing number of studies have reported adverse tissue reactions around metal-on-metal (MM) hip implants. However, the origin and mechanisms of these reactions remain unclear. Moreover, the biological effects of nanometer-size chromium oxide particles, the predominant type of wear particles produced by MM implants, remain mostly unknown. The purpose of this study was to analyze the cytotoxic effects of clinically relevant nanometer-size chromium oxide particles on macrophage response in vitro. J774.A1 macrophages were cultured with either 60 nm or 700 nm commercially available Cr2 O3 particles at different concentrations. Two different particle sizes were analyzed to evaluate potential volume effects. Cell mortality was analyzed by light microscopy, flow cytometry (annexin V-fluorescein isothiocyanate and propidium iodide assay), and using a cell death detection enzyme-linked immunosorbant assay (ELISA). Tumor necrosis factor alpha (TNF-α), monocyte chemotactic protein-1 (MCP-1), and macrophage inflammatory protein-1 alpha (MIP-1α) release was measured by ELISA, and gene expression was analyzed by quantitative real-time PCR. Results showed that, at high concentrations, Cr2 O3 particles of both sizes can be cytotoxic, inducing significant decreases in total cell numbers and increases in necrosis. Results also suggested that these effects were dependent on particle volume. However, TNF-α, MCP-1, and MIP-1α cytokine release and gene expression remained low. Overall, this study demonstrates that nanometer-size particles of Cr2 O3 , a stable form of chromium oxide ceramic, have rather low cytotoxic effects on macrophages. Therefore, these particles may not be the main culprit in the initiation of the inflammatory reaction in MM periprosthetic tissues. However, other parameters (e.g., potential intracellular damage) remain to be investigated.

Metal ion concentrations in body fluids after implantation of hip replacements with metal-on-metal bearing--systematic review of clinical and epidemiological studies

INTRODUCTION

The use of metal-on-metal (MoM) total hip arthroplasty (THA) increased in the last decades. A release of metal products (i.e. particles, ions, metallo-organic compounds) in these implants may cause local and/or systemic adverse reactions. Metal ion concentrations in body fluids are surrogate measures of metal exposure.

OBJECTIVE

To systematically summarize and critically appraise published studies concerning metal ion concentrations after MoM THA.

METHODS

Systematic review of clinical trials (RCTs) and epidemiological studies with assessment of metal ion levels (cobalt, chromium, titanium, nickel, molybdenum) in body fluids after implantation of metalliferous hip replacements. Systematic search in PubMed and Embase in January 2012 supplemented by hand search. Standardized abstraction of pre- and postoperative metal ion concentrations stratified by type of bearing (primary explanatory factor), patient characteristics as well as study quality characteristics (secondary explanatory factors).

RESULTS

Overall, 104 studies (11 RCTs, 93 epidemiological studies) totaling 9.957 patients with measurement of metal ions in body fluids were identified and analyzed. Consistently, median metal ion concentrations were persistently elevated after implantation of MoM-bearings in all investigated mediums (whole blood, serum, plasma, erythrocytes, urine) irrespective of patient characteristics and study characteristics. In several studies very high serum cobalt concentrations above 50 µg/L were measured (detection limit typically 0.3 µg/L). Highest metal ion concentrations were observed after treatment with stemmed large-head MoM-implants and hip resurfacing arthroplasty.

DISCUSSION

Due to the risk of local and systemic accumulation of metallic products after treatment with MoM-bearing, risk and benefits should be carefully balanced preoperatively. The authors support a proposed "time out" for stemmed large-head MoM-THA and recommend a restricted indication for hip resurfacing arthroplasty. Patients with implanted MoM-bearing should receive regular and standardized monitoring of metal ion concentrations. Further research is indicated especially with regard to potential systemic reactions due to accumulation of metal products.