The contribution of trabecular bone to the stiffness and strength of rat lumbar vertebrae

The spinal consequences of HT-2 toxin and selenium deficiency during bone maturation in mice

In our investigation, we probed the ramifications of low selenium diets and HT-2 mycotoxin exposure on spinal development and structural fidelity in murine models. A cohort of 48 male mice was segregated into six groups: a control set, a singular low selenium diet group, two cohorts exposed to distinct concentrations of HT-2 toxin (1.6 and 3.2 mg/kg·bw·d), and two assemblies subjected to a confluence of low selenium intake and each designated HT-2 dosage. Across an 8-week investigative period, parameters such as body mass, markers of bone metabolism, and cellular vigor were assiduously monitored. Analytical techniques encompassed biomechanical assessments, X-ray scrutiny, and micro-computed tomography (micro-CT) evaluations. Our results unveiled a dose-dependent diminution in the body mass of mice exclusively exposed to HT-2 toxin, whereas concurrent exposure to both low selenium and HT-2 toxins elicited a synergistic effect. Pertinent shifts were observed in calcium, phosphorus, and vitamin D concentrations, as well as in the operational dynamics of osteoblasts and osteoclasts, aligning with toxin dosage and combined exposure. Variations in biomechanical attributes were also discerned, mirroring the levels of toxin exposure. Micro-CT and X-ray examinations further corroborated the extensive detrimental impact on the cortical and trabecular architecture of the mice's spinal columns. This inquiry elucidates the complex synergistic interactions between low selenium and HT-2 mycotoxin on murine spinal development and integrity under co-exposure conditions. These findings accentuate the exigency of comprehensively understanding the solitary and joint effects of these toxins on osseous health, providing pivotal insights for future toxicological research and public health strategies.

Effects of T-2 and deoxynivalenol mycotoxins on mouse spinal bone growth and integrity

Kashin-Beck Disease (KBD), an osteoarticular disorder, is influenced by various factors, including exposure to Deoxynivalenol (DON) and T-2 mycotoxins. This study systematically explored the impact of these mycotoxins on the development and structural resilience of spinal structures in mice, examining both isolated and combined effects. The experiment involved 72 male mice divided into nine groups, each subjected to varying concentrations of T-2, DON, or their combinations over four weeks. Rigorous monitoring included body weight, key indicators of bone metabolism, and cellular activities essential to bone health. Comprehensive evaluations using biomechanical analysis, x-ray, and micro-computed tomography (micro-CT) were conducted to assess alterations in spinal structure. The findings revealed a pivotal aspect: mice exhibited a dose-dependent decline in body weight when exposed to individual mycotoxins, while simultaneous exposure produced an unanticipated antagonistic effect. Moreover, decreases were noted in levels of calcium, phosphorus, and vitamin D, coupled with changes in the activities of osteoblasts (increased) and osteoclasts (decreased), all intricately tied to the toxins' dosages and combinations. Notably, variations in the biomechanical properties corresponded with the mycotoxin dosage and blend, showing a decline in biomechanical strength. Micro-CT analyses further substantiated the profound toxic impact of the toxin dosage and mixtures on both the cortical and trabecular components of the spinal structures. In summary, this investigation unequivocally illuminates the dose- and ratio-dependent deleterious impacts of DON and T-2 mycotoxins on the growth and structural soundness of spinal structures in mice. These findings highlight the urgent need for a comprehensive understanding of the potential hazards these toxins pose to bone health, providing invaluable guidance for future toxicological research and public health strategies.

Femoral bone structure and mechanics at the edge and core of an expanding population of the invasive frog Xenopus laevis

Understanding how living tissues respond to changes in their mechanical environment is a key question in evolutionary biology. Invasive species provide an ideal model for this as they are often transplanted between environments that differ drastically in their ecological and environmental context. Spatial sorting, the name given to the phenomenon driving differences between individuals at the core and edge of an expanding range, has been demonstrated to impact the morphology and physiology of Xenopus laevis from the invasive French population. Here, we combined a structural analysis using micro-CT scanning and a functional analysis by testing the mechanical properties of the femur to test whether the increased dispersal at the range edge drives differences in bone morphology and function. Our results show significant differences in the inner structure of the femur as well as bone material properties, with frogs from the centre of the range having more robust and resistant bones. This is suggestive of an energy allocation trade-off between locomotion and investment in bone formation, or alternatively, may point to selection for fast locomotion at the range edge. Overall, our results provide insights on the growth of the long bones and the formation of trabecular bone in frogs.

HT-2 mycotoxin and selenium deficiency: Effects on Femur development and integrity in Young mice

Kashin-Beck Disease (KBD), an osteoarticular disorder, is potentially influenced by several factors, among which selenium deficiency and HT-2 mycotoxin exposure are considered significant. However, the combined effect of these factors on femoral development remains unclear, Conducted over eight weeks on forty-eight male mice categorized into control, selenium-deficient, and HT-2 toxin-exposed groups, including dual-exposure sets, this study comprehensively monitored body weight, bone metabolism markers, and cellular health. Employing biomechanical analysis, micro-computed tomography (micro-CT), and transmission electron microscopy (TEM), we unearthed a reduction in body weight due to HT-2 toxin alone, with selenium deficiency exacerbating these effects synergistically. Our results unveil that both factors independently affect bone metabolism, yet their confluence leads to a pronounced degradation of bone health parameters, including alterations in calcium, phosphorus, and vitamin D levels, alongside marked changes in osteoblast and osteoclast activity and bone cell structures. The notable damage to femoral cortical and trabecular architectures underscores the perilous interplay between dietary selenium absence and HT-2 toxin presence, necessitating a deeper understanding of their separate and joint effects on bone integrity. These discoveries underscore the imperative for a nuanced approach to toxicology research and public health policy, highlighting the pivotal influence of environmental and nutritional factors on skeletal well-being.

Modulatory interactions of T-2 and deoxynivalenol mycotoxins on murine femoral development and osteological integrity

In this study, we conducted a systematic assessment of the effectsof deoxynivalenol (DON) and T-2 mycotoxins (T-2) on the developmental processes and structural integrity of murine femurs, considering both the isolated and synergistic effects of these toxins. To this end, we divided 72 male mice into nine groups, each subjected to varying dosages of T-2, DON, or their combinations. Over a four-week experimental period, meticulous monitoring was undertaken regarding the mice's body weight, biochemical markers of bone formation and resorption, and the activity of relevant cells. To comprehensively evaluate alterations in bone structure, we employed biomechanical analysis, micro-computed tomography (micro-CT), and transmission electron microscopy.Our findings unveiled a significant revelation: the mice exhibited a dose-dependent decrease in body weight upon exposure to individual mycotoxins, while the combined use of these toxins manifested an atypical antagonistic effect. Furthermore, we observed variations in the levels of calcium, phosphorus, and vitamin D, as well as adjustments in the activities of osteoblasts and osteoclasts, all intricately linked to the dosage and ratio of the toxins. Alterations in biomechanical properties were also noted to correlate with the dosage and combination of toxins. Analyses via micro-CT and transmission electron microscopy further corroborated the substantial impact of toxin dosage and combinations on both cortical and trabecular bone structures.In summation, our research unequivocally demonstrates the dose- and ratio-dependent detrimental effects of DON and T-2 mycotoxins on the growth and structural integrity of murine femurs. These insights accentuate the importance of a profound understanding of the potential risks these toxins pose to bone health, offering pivotal guidance for future toxicological research and public health preventative strategies.

Cortical and Trabecular Bone Modeling and Implications for Bone Functional Adaptation in the Mammalian Tibia

Bone modeling involves the addition of bone material through osteoblast-mediated deposition or the removal of bone material via osteoclast-mediated resorption in response to perceived changes in loads by osteocytes. This process is characterized by the independent occurrence of deposition and resorption, which can take place simultaneously at different locations within the bone due to variations in stress levels across its different regions. The principle of bone functional adaptation states that cortical and trabecular bone tissues will respond to mechanical stimuli by adjusting (i.e., bone modeling) their morphology and architecture to mechanically improve their mechanical function in line with the habitual in vivo loading direction. This principle is relevant to various research areas, such as the development of improved orthopedic implants, preventative medicine for osteopenic elderly patients, and the investigation of locomotion behavior in extinct species. In the present review, the mammalian tibia is used as an example to explore cortical and trabecular bone modeling and to examine its implications for the functional adaptation of bones. Following a short introduction and an exposition on characteristics of mechanical stimuli that influence bone modeling, a detailed critical appraisal of the literature on cortical and trabecular bone modeling and bone functional adaptation is given. By synthesizing key findings from studies involving small mammals (rodents), large mammals, and humans, it is shown that examining both cortical and trabecular bone structures is essential for understanding bone functional adaptation. A combined approach can provide a more comprehensive understanding of this significant physiological phenomenon, as each structure contributes uniquely to the phenomenon.

The effect of Staphylococcus aureus exposure on white-tailed deer trabecular bone stiffness and yield

With a growing number of osteomyelitis diagnoses, many of which are linked to Staphylococcus aureus (S. aureus), it is imperative to understand the pathology of S. aureus in relation to bone to provide better diagnostics and patient care. While the cellular mechanisms of S. aureus and osteomyelitis have been studied, little information exists on the biomechanical effects of such infections. The aim of this study was to determine the effect of S. aureus exposure on the stiffness and yield of trabecular bone tissue. S. aureus-ATCC-12600, a confirmed biofilm producer, along with one hundred and three trabecular cubes (5 × 5 × 5 mm) from the proximal tibiae of Odocoileus virginianus (white-tailed deer) were used in this experiment. Bone cubes were disinfected and then swabbed to confirm no residual living microbes or endospore contamination before inoculation with S. aureus (test group) or sterile nutrient broth (control group) for 72 h. All cubes were then tested in compression until yield using an Instron 5942 Single-Column machine. Structural stiffness (N/mm) and yield (MPa) were calculated and compared between the two groups. Our results revealed that acute exposure to S. aureus, within the context of our deer tibia model, does not significantly decrease trabecular bone stiffness or yield. The results of this study may be of value clinically when assessing fracture risks for osteomyelitis or other patients whose cultures test positive for S. aureus.

Cortical and trabecular bone structure of the hominoid capitate

Morphological variation in the hominoid capitate has been linked to differences in habitual locomotor activity due to its importance in movement and load transfer at the midcarpal joint proximally and carpometacarpal joints distally. Although the shape of bones and their articulations are linked to joint mobility, the internal structure of bones has been shown experimentally to reflect, at least in part, the loading direction and magnitude experienced by the bone. To date, it is uncertain whether locomotor differences among hominoids are reflected in the bone microarchitecture of the capitate. Here, we apply a whole‐bone methodology to quantify the cortical and trabecular architecture (separately and combined) of the capitate across bipedal (modern Homo sapiens), knuckle‐walking (Pan paniscus, Pan troglodytes, Gorilla sp.), and suspensory (Pongo sp.) hominoids (n = 69). It is hypothesized that variation in bone microarchitecture will differentiate these locomotor groups, reflecting differences in habitual postures and presumed loading force and direction. Additionally, it is hypothesized that trabecular and cortical architecture in the proximal and distal regions, as a result of being part of mechanically divergent joints proximally and distally, will differ across these portions of the capitate. Results indicate that the capitate of knuckle‐walking and suspensory hominoids is differentiated from bipedal Homo primarily by significantly thicker distal cortical bone. Knuckle‐walking taxa are further differentiated from suspensory and bipedal taxa by more isotropic trabeculae in the proximal capitate. An allometric analysis indicates that size is not a significant determinate of bone variation across hominoids, although sexual dimorphism may influence some parameters within Gorilla. Results suggest that internal trabecular and cortical bone is subjected to different forces and functional adaptation responses across the capitate (and possibly other short bones). Additionally, while separating trabecular and cortical bone is normal protocol of current whole‐bone methodologies, this study shows that when applied to carpals, removing or studying the cortical bone separately potentially obfuscates functionally relevant signals in bone structure.

Deciphering an extreme morphology: bone microarchitecture of the hero shrew backbone (Soricidae: Scutisorex)

Biological structures with extreme morphologies are puzzling because they often lack obvious functions and stymie comparisons to homologous or analogous features with more typical shapes. An example of such an extreme morphotype is the uniquely modified vertebral column of the hero shrew Scutisorex, which features numerous accessory intervertebral articulations and massively expanded transverse processes. The function of these vertebral structures is unknown, and it is difficult to meaningfully compare them to vertebrae from animals with known behavioural patterns and spinal adaptations. Here, we use trabecular bone architecture of vertebral centra and quantitative external vertebral morphology to elucidate the forces that may act on the spine of Scutisorex and that of another large shrew with unmodified vertebrae (Crocidura goliath). X-ray micro-computed tomography (µCT) scans of thoracolumbar columns show that Scutisorex thori is structurally intermediate between C. goliath and S. somereni internally and externally, and both Scutisorex species exhibit trabecular bone characteristics indicative of higher in vivo axial compressive loads than C. goliath. Under compressive load, Scutisorex vertebral morphology is adapted to largely restrict bending to the sagittal plane (flexion). Although these findings do not solve the mystery of how Scutisorex uses its byzantine spine in vivo, our work suggests potentially fruitful new avenues of investigation for learning more about the function of this perplexing structure.

Basic morphometry, microcomputed tomography and mechanical evaluation of the tibiotarsal bone of a dual-purpose and a broiler chicken line

Continuous loading of the skeleton by the body’s weight is an important factor in establishing and maintaining bone morphology, architecture and strength. However, in fast-growing chickens the appendicular skeleton growth is suboptimal making these chickens predisposed to skeletal mineralization disorders and fractures. This study compared the macro- and microstructure as well as the mechanical properties of the tibiotarsus of a novel dual-purpose, Lohmann Dual (LD) and a highly developed broiler, Ross (Ross 308) chicken line. Eighty one-day-old male chicks of each line were grown until their body weight (BW) reached 2000g. Starting at the day of hatching, six birds of each line were sampled weekly. The weight, length and width of the tibiotarsus were measured and its mechanical properties (rigidity, M-Max and the M-fracture) were evaluated using the three-point bending test. Additionally, the mineral density of both, trabecular and cortical bone, the bone volume fraction, the trabecular number, thickness and separation plus cortical thickness of both chicken lines were analyzed using microcomputed tomography. The growth of the tibiotarsus in both chicken lines followed a similar pattern. At the same age, the lighter LD chickens had shorter, thinner and lighter tibiotarsi than those of Ross chickens. However, the LD chickens had a similar cortical thickness, bone volume fraction and similar mineral density of both trabecular and cortical bone to that of Ross chickens. Furthermore, the tibiotarsus of LD chickens was longer, heavier and wider than those of Ross chickens of the same BW. In addition the rigidity of the LD tibiotarsus was greater than that of Ross chickens. This suggests that the tibiotarsus of LD chickens had more bending resistance than those of Ross chickens of the same BW. Consequently, fattening LD chickens to the marketable weight should not affect their leg skeleton stability.

Neither cortical nor trabecular: An unusual type of bone in the heavy-load-bearing lower pharyngeal jaw of the black drum (Pogonias cromis)

Durophagous fish consume a diet based primarily on hard-shelled animals, mainly mollusks. In order to successfully perform this task, they are equipped with an extra set of jaws located in their throat called pharyngeal jaws. Here we present the results of a study of the structure of the bony material of the exceptionally powerful lower pharyngeal jaws (LPJs) of the black drum Pogonias cromis which generate the highest biting forces documented in bony fishes. In particular, we studied the two long and slender struts that support the entire dental plate and teeth of the LPJ, in order to determine how this structure withstands the huge stresses it encounters repetitively and for long periods of time. We describe the hierarchical structure of the struts of lower pharyngeal jaw of P. cromis at a wide range of length scales, and show how it is adapted to successfully achieve its high mechanical performance. In particular, we show that the bone material of the strut is neither cortical nor cancellous, and although it is highly porous, its complex and layered three-dimensional arrangement of thick lamellae sheets, which are inter-connected by thin plates, is perfectly tailored to withstand extremely large but directionally-consistent forces. STATEMENT OF SIGNIFICANCE: The diet of some fish consists of hard food, like mollusks and shells. In order to accomplish the task of cracking this type of food, they have an extra set of bony jaws located in their throat, called pharyngeal jaws. Here we describe the hierarchical structural elements of these jaws which allow them to withstand huge forces repeatedly over long periods of time. Surprisingly, the structure is very porous, but its architectural design is superbly adapted to handle consistently-oriented forces. This structural motif defines a new bony material which is neither cortical nor cancellous.

Are we crying Wolff? 3D printed replicas of trabecular bone structure demonstrate higher stiffness and strength during off-axis loading

Roux's principle of bone functional adaptation postulates that bone tissue, and particularly trabecular bone tissue, responds to mechanical stimuli by adjusting (modeling) its architecture accordingly. Hence, it predicts that the new modeled trabecular structure is mechanically improved (stiffer and stronger) in line with the habitual in vivo loading direction. While previous studies found indirect evidence to support this theory, direct support was so far unattainable. This is attributed to the fact that each trabecular bone is unique, and that trabecular bone tissue tends to be damaged during mechanical testing. Consequently, a unique modeled trabecular structure can be mechanically tested only along one direction and a comparison to other directions for that specific structure is impossible. To address this issue, we have 3D printed 10 replicas of a trabecular structure from a sheep talus cropped along the 3 principal axes of the bone and in line with the principal direction of loading (denoted on-axis model). Next, we have rotated the same cropped trabecular structure in increments of 10° up to 90° to the bone principal direction of loading (denoted off-axis models) and printed 10 replicas of each off-axis model. Finally, all on-axis and off-axis 3D printed replicas were loaded in compression until failure and trabecular structure stiffness and strength were calculated. Contrary to our prediction, and conflicting with Roux's principle of bone functional adaptation, we found that a trabecular structure loaded off-axis tended to have higher stiffness and strength values when compared to the same trabecular structure loaded on-axis. These unexpected results may not disprove Roux's principle of bone functional adaptation, but they do imply that trabecular bone adaptation may serve additional purposes than simply optimizing bone structure to one principal loading scenario and this suggests that we still don't fully understand bone modeling in its entirety.

Normal trabecular vertebral bone is formed via rapid transformation of mineralized spicules: A high-resolution 3D ex-vivo murine study

At birth, mouse vertebrae have a reticular fine spongy morphology, yet in the adult animal they exhibit elaborate trabecular architectures. Here, we characterize the physiological microstructural transformations in growing young female mice of the widely used C57BL/6 strain. Extensive architectural changes lead to the establishment of mature cancellous bone in the spine. Vertebrae were mapped in 3D by high resolution microcomputed tomography (µCT), backed by conventional histology. Three different phases are observed in the natural bony biomaterial: In a prenatal templating phase, early vertebrae are composed of foamy, loosely-packed mineralized spicules. During a consolidation phase in the first 7 days after birth, bone material condenses into struts and forms primitive trabeculae accompanied by a significant (>50%) reduction in bone volume/tissue volume ratio (BV/TV). After day 7, the trabeculae expand, reorient and increase in mineral density. Swift growth ensues such that by day 14 the young lumbar spine exhibits all morphological features observed in the mature animal. The greatly varied micro-morphologies of normal trabecular bone observed in 3D within a short timespan are typical for rodent and presumably for other mammalian forming spines. This suggests that fully structured cancellous bone emerges through rapid post-natal restructuring of a foamy mineralized scaffold. STATEMENT OF SIGNIFICANCE: Cancellous bone develops in stages that are not well documented. Using a mouse model, we provide an observer-independent quantification of normal bone formation in the spine. We find that within 14 days, the cancellous bone transforms in 3 phases from a scaffold of spicules into well organized, fully mineralized trabeculae in a functional spine. Detailed knowledge of the physiological restructuring of mineralized material may help to better understand bone formation and may serve as a blueprint for studies of pharmaceuticals effects, tissue healing and regeneration.

What Is the Effect of High-dose Radiation on Bone in Patients With Sacral Chordoma? A CT Study

BACKGROUND

Effects of high-dose radiation using protons and photons on bone are relatively unexplored, but high rates of insufficiency fractures are reported, and the causes of this are incompletely understood. Imaging studies with pre- and postradiation scans can help one understand the effect of radiation on bone.

QUESTIONS/PURPOSES

The purpose of this study was to assess the effects of high-dose radiation on the trabecular density of bone in the sacrum using CT-derived Hounsfield units (HU).

METHODS

Between 2009 and 2015, we treated 57 patients (older then 18 years) with sacral chordoma. Fourteen (25%) of them were treated with radiation only. The general indication for this approach is inoperability resulting from tumor size. Forty-two (74%) patients were treated with transverse sacral resections and high-dose radiotherapy (using either protons or photons or a combination) before surgery and after surgery. During this time period, our indication for this approach generally was symptomatic sacral chordoma in which resection would prevent further growth and reasonable sacrifice of nerve roots was possible. Of those patients, 21 (50%) had CT scans both before and after radiation treatment. We used HU as a surrogate for bone density. CT uses HU to derive information on tissue and bone quantity. A recent study presented reference HU values for normal (mean 133 ± 38 HU), osteoporotic (101 ± 25 HU), and osteopenic bone (79 ± 32 HU). To adjust for scanning protocol-induced changes in HU, we calculated the ratio between bone inside and outside the radiation field rather than using absolute values. To assess the effect of radiation, we tested whether there was a difference in ratio (sacrum/L1) before and after radiation. A control measurement was performed (L2/L1) and also tested for a difference before and after radiation. Statistical analyses were performed using the paired t-test.

RESULTS

The effects of radiation appeared confined to the intended field, because the bone density outside the treated field was not observed to decrease. The ratio of HU (a surrogate for bone density) in L2 relative to L1 did not change after radiotherapy (preradiation mean: 0.979 ± 0.009, postradiation mean: 0.980 ± 0.009, mean difference outside the radiation field: -0.001, 95% confidence interval [CI], -0.009 to 0.007, p = 0.799). The ratio of HU within the radiation field relative to L1 decreased after radiotherapy (preradiation mean: 0.895 ± 0.050, postradiation mean: 0.658 ± 0.050, mean difference inside the radiation field: 0.237, 95% CI, 0.187-0.287, p < 0.001), suggesting the bone density stayed the same outside the radiation field but decreased inside the radiation field.

CONCLUSIONS

Trabecular bone density decreased after high-dose radiation therapy in a small group of patients with sacral chordoma. High-dose radiation is increasingly gaining acceptance for treating sacral malignancies; further long-term prospective studies using calibrated CT scanners and preferably bone biopsies are needed.

LEVEL OF EVIDENCE

Level IV, therapeutic study.

Failure behaviour of rat vertebrae determined through simultaneous compression testing and micro-CT imaging

Skeletal fractures, including those resulting from osteoporosis, result in significant healthcare and societal costs on an annual basis. Therefore, it is important to understand the mechanisms by which these fractures occur. Incremental compression testing combined with micro-CT imaging has been used to visualize the progression of failure in trabecular bone samples; however, these studies have ignored the potential contributions of the cortical shell. In the current study, incremental compression testing with simultaneous micro-CT imaging was performed on rat vertebrae from multiple disease states (healthy control, osteoporotic, osteoporotic + treatment). These tests allowed the progression of failure through an entire vertebral body to be visualized for the first time. Three distinct failure modes were observed throughout all specimens, independent of disease state. Two of these failure modes (types I and II), which were observed in 93% of all specimens, were associated with the vascular apertures in the vertebrae's dorsal and ventral surfaces. This behaviour is likely caused by the stress concentrations in the cortical shell resulting from the apertures themselves, coupled with the reduced trabecular bone volume adjacent to them. These results suggest that the combined contributions of both the cortical shell and trabecular bone must be considered when studying the compressive failure behaviour of rat vertebrae.

Does Secondary Renal Osteopathy Exist in Companion Animals?

Secondary renal hyperparathyroidism is an inevitable consequence of chronic kidney disease. In human patients, the disease is associated with decreased bone quality and increased fracture risk. Recent evidence suggests that bone quality is also decreased in companion animals, more pronouncedly in cats compared with dogs, likely because of a longer disease course. The clinical significance of these findings is yet to be determined. However, clinicians should keep in mind that animals with chronic kidney disease have decreased bone quality and increased fracture risk.

3D scanning SAXS: a novel method for the assessment of bone ultrastructure orientation

The arrangement and orientation of the ultrastructure plays an important role for the mechanical properties of inhomogeneous and anisotropic materials, such as polymers, wood, or bone. However, there is a lack of techniques to spatially resolve and quantify the material's ultrastructure orientation in a macroscopic context. In this study, a new method is presented, which allows deriving the ultrastructural 3D orientation in a quantitative and spatially resolved manner. The proposed 3D scanning small-angle X-ray scattering (3D sSAXS) method was demonstrated on a thin trabecular bone specimen of a human vertebra. A micro-focus X-ray beam from a synchrotron radiation source was used to raster scan the sample for different rotation angles. Furthermore, a mathematical framework was developed, validated and employed to describe the relation between the SAXS data for the different rotation angles and the local 3D orientation and degree of orientation (DO) of the bone ultrastructure. The resulting local 3D orientation was visualized by a 3D orientation map using vector fields. Finally, by applying the proposed 3D scanning SAXS method on consecutive bone sections, a 3D map of the local orientation of a complete trabecular element could be reconstructed for the first time. The obtained 3D orientation map provided information on the bone ultrastructure organization and revealed links between trabecular bone microarchitecture and local bone ultrastructure. More specifically, we observed that trabecular bone ultrastructure is organized in orientation domains of tens of micrometers in size. In addition, it was observed that domains with a high DO were more likely to be found near the surface of the trabecular structure, and domains with lower DO (or transition zones) were located in-between the domains with high DO. The method reproducibility was validated by comparing the results obtained when scanning the sample under different sample tilt angles. 3D orientation maps such as the ones created using 3D scanning SAXS will help to quantify and understand structure-function relationships between bone ultrastructure and bone mechanics. Beyond that, the proposed method can also be used in other research fields such as material sciences, with the aim to locally determine the 3D orientation of material components.

Rapid alterations of avian medullary bone material during the daily egg-laying cycle

Bone is a dynamic tissue which is continuously adapting not only to external mechanical stimuli but also to internal metabolic calcium demands. During normal bone remodeling, bone-resorbing osteoclasts release calcium from the bone and digest the collagenous bone matrix, after which bone-depositing osteoblasts form unmineralized collagen matrix, which subsequently mineralizes. The detailed mechanism by which calcium is deposited at the site of mineralization and removed from it during bone resorption is largely unknown. Experimental studies are difficult to conduct because in adult bone only a small fraction of bone tissue is remodeled at any moment in time. Thus, one promising approach is to study mineral deposition and resorption in model systems in which a large fraction of the bone mineral is mobilized in a relatively short period of time. We investigated the microscopic and nanoscopic alterations of avian medullary bone architecture during the egg-laying (oviposition) cycle of hens. Medullary bone forms a labile calcium reservoir for eggshell production and is characterized by an extremely rapid and high-flux calcium metabolism. It thus, provides the unique opportunity to study processes of bone remodeling in their most intensive form. We used a combination of synchrotron X-ray tomography together with small angle X-ray scattering (SAXS), wide angle X-ray diffraction (WAXD) and X-ray fluorescence (XRF) to correlate microscopic medullary bone attributes such as the mineral content, medullary bone volume fraction and medullary bone trabecular thickness with nanoscopic alterations in the mineral particle size (thickness parameter T and length parameter L) during the oviposition cycle. To identify the timing of the different stages of the cycle, ionic calcium, phosphorus and PTH concentrations in the blood of the layers were monitored. We found that the microscopic and nanoscopic architecture of avian medullary bone material changes rapidly during the oviposition cycle. During eggshell calcification, the mineral content and the size of trabeculae of medullary bone decrease markedly. Furthermore, the average mineral particle size increases during resorption, suggesting that the smaller mineral particles are preferrentially removed. Medullary bone thus formes a fast-responding system exhibiting rapid alterations of the material at the micron and nano scale. Those mechanisms are crucial to provide calcium for the high metabolic calcium demand during eggshell mineralization.

Of mice, rats and men: trabecular bone architecture in mammals scales to body mass with negative allometry

Body mass (BM) in mammal species spans over six orders of magnitude. Although trabecular bone contributes to the mechanical properties of bones, we know much less about how trabecular bone scales with BM than about how cortical bone scales with BM. We therefore conducted a meta-analysis of the existing literature to test in rodents, humans and other mammals, predicted scaling properties between BM and several trabecular parameters: bone volume fraction (BV/TV), trabecular number (Tb.N), trabecular thickness (Tb.Th), trabecular separation (Tb.Sp), connectivity density (ConnD) and degree of anisotropy (DA). Our results show that BV/TV and DA are independent of BM and that Tb.N, Tb.Th and Tb.Sp scale with negative allometry relative to BM. Rodents appear to have relatively thicker and fewer trabeculae than humans, and we propose it that is due to a minimum thickness threshold "imposed" on mechanically functional trabeculae. Consequently, rodents (mice and rats) and humans demonstrate two distinct mechanisms to achieve variations in BV/TV. Although Tb.Th variation is the main contributing factor for differences in BV/TV in humans, Tb.N variation is the main contributing factor for differences in BV/TV in rodents. Our results also demonstrate no correlation between Tb.N and Tb.Th within each taxon (mice, rats and humans). Since rodents are a common animal model for research on bone biomechanics, the evidence that trabecular bone parameters scale and correlate differently in rodents than in humans suggests that care should be applied when extrapolating bone biomechanical results from small animals to large-bodied humans.

Structural, compositional, and biomechanical alterations of the lumbar spine in rats with mucopolysaccharidosis type VI (Maroteaux-Lamy syndrome)

Mucopolysaccharidosis (MPS) VI is an inherited lysosomal storage disorder resulting from deficiency of N-acetylgalactosamine-4-sulfatase activity and subsequent accumulation of incompletely degraded dermatan sulfate (DS) containing glycosaminoglycans (GAGs). Painful spinal deformities are commonly found in MPS VI patients. We characterized lumbar spine structure, composition, and biomechanics in a naturally occurring rat MPS VI model and evaluated the role of MMP-13, ADAMTS-5 and TNF-α in modulating the observed changes. MPS VI rats had discs with large vacuolated cells and sizable nuclear defects. MPS spine segments also had structural and functional changes suggestive of spinal instability, including decreased nuclear pressurization, increased joint laxity and increased disc height index. These functional changes were at least partly associated with elevated ADAMTS-5, MMP-13, and TNF-α. Vertebral and endplate biomechanics were also affected by MPS VI with decreased failure load and stiffness. The discal and vertebral dysfunctions observed in MPS VI rats are likely to be associated with pathological spinal conditions, similar to those that afflict MPS patients. Our findings also suggest more broadly that abnormal accumulation of GAGs and the associated chronic pro-inflammatory and catabolic cascade may also be a source of spinal dysfunction.

Increased variability of bone tissue mineral density resulting from estrogen deficiency influences creep behavior in a rat vertebral body

Progressive vertebral deformation increases the fracture risk of a vertebral body in the postmenopausal patient. Many studies have observed that bone can demonstrate creep behavior, defined as continued time-dependent deformation even when mechanical loading is held constant. Creep is a characteristic of viscoelastic behavior, which is common in biological materials. We hypothesized that estrogen deficiency-dependent alteration of the mineral distribution of bone at the tissue level could influence the progressive postmenopausal vertebral deformity that is observed as the creep response at the organ level. The objective of this study was thus to examine whether the creep behavior of vertebral bone is changed by estrogen deficiency, and to determine which bone property parameters are responsible for the creep response of vertebral bone at physiological loading levels using an ovariectomized (OVX) rat model. Correlations of creep parameters with bone mineral density (BMD), tissue mineral density (TMD) and architectural parameters of both OVX and sham surgery vertebral bone were tested. As the vertebral creep was not fully recovered during the post-creep unloading period, there was substantial residual displacement for both the sham and OVX groups. A strong positive correlation between loading creep and residual displacement was found (r=0.868, p<0.001). Of the various parameters studied, TMD variability was the parameter that best predicted the creep behavior of the OVX group (p<0.038). The current results indicated that creep caused progressive, permanent reduction in vertebral height for both the sham and OVX groups. In addition, estrogen deficiency-induced active bone remodeling increased variability of trabecular TMD in the OVX group. Taken together, these results suggest that increased variability of trabecular TMD resulting from high bone turnover influences creep behavior of the OVX vertebrae.