Comparative Analysis of Microorganism Species Succession on Three Implant Surfaces With Different Roughness: An In Vivo Study

Structure and composition of early biofilms formed on dental implants are complex, diverse, subject-specific and dynamic

Biofilm-associated peri-implant infections pose a major problem in modern medicine. The understanding of biofilm development is hampered by biofilm complexity and the lack of robust clinical models. This study comprehensively characterized the dynamics of early biofilm formation in the transmucosal passage of implant abutments in 12 patients. Biofilm structures and compositions were complex, diverse, subject-specific and dynamic. A total of 371 different bacterial species were detected. 100 phylogenetically diverse unnamed species and 35 taxonomically diverse disease-associated species comprised an average 4.3% and 3.1% of the community, respectively, but reached up to 12.7% and 21.7% in some samples. Oral taxa formed numerous positive associations and clusters and were characterized by a high potential for metabolic interactions. The subspecies diversity was highly patient-specific and species-dependent, with 1427 ASVs identified in total. The unprecedented depth of early biofilm characterization in this study will support the development of individualized preventive and early diagnostic strategies.

Fitting pieces into the puzzle: The impact of titanium-based dental implant surface modifications on bacterial accumulation and polymicrobial infections

Polymicrobial infection is the main cause of dental implant failure. Although numerous studies have reported the ability of titanium (Ti) surface modifications to inhibit microbial adhesion and biofilm accumulation, the majority of solutions for the utilization of Ti antibacterial surfaces have been testedin in vitro and animal models, with only a few developed surfaces progressing into clinical research. Motivated by this huge gap, we critically reviewed the scientific literature on the existing antibacterial Ti surfaces to help understand these surfaces' impact on the "puzzle" of undesirable dental implant-related infections. This manuscript comprises three main sections: (i) a narrative review on topics related to oral biofilm formation, bacterial-implant surface interactions, and on how implant-surface modifications can influence microbial accumulation; (ii) a critical evidence-based review to summarize pre-clinical and clinical studies in an attempt to "fit pieces into the puzzle" to unveil the best way to reduce microbial loads and control polymicrobial infection around dental implants showed by the current in vivo evidence; and (iii) discussion and recommendations for future research testing emerging antibacterial implant surfaces, connecting basic science and the requirements for future clinical translation. The findings of the present review suggest no consensus regarding the best available Ti surface to reduce bacterial colonization on dental implants. Smart release or on-demand activation surface coatings are a "new piece of the puzzle", which may be the most effective alternative for reducing microbial colonization on Ti surfaces, and future studies should focus on these technologies.

Oral prosthetic microbiology: aspects related to the oral microbiome, surface properties, and strategies for controlling biofilms

The oral cavity is an environment that allows for the development of complex ecosystems; the placement of prosthetic devices as a consequence of partial or total tooth loss may alter the diversity of microbial communities. Biofilms on the surface of materials used in dental prostheses can promote important changes in the mechanic and aesthetic properties of the material itself and may cause local and systemic diseases for the prosthetic wearer. This review presents the main features of the oral microbiome associated with complete or partial dentures and dental implants. The main diseases associated with microbial colonization of prosthetic surfaces, factors that may affect biofilm formation on prosthetic materials, as well as novel alternative therapies aiming to reduce biofilm formation and/or to eradicate biofilms formed on these materials are also explored.

In vitro and in vivo effects of the combination of myricetin and miconazole nitrate incorporated to thermosensitive hydrogels, on C. albicans biofilms

BACKGROUND

Candida albicans-related infections are common infections in clinic, among which biofilm-associated infections are most devastating and challenging to overcome. Myricetin (MY) is a plant-derived natural product with various pharmacological activities. Its anti-biofilm effect against C. albicans and its ability to increase the antifungal effect of miconazole nitrate (MN) were unclear and yet need to be explored.

HYPOTHESIS/PURPOSE

In this study the anti-biofilm effect of MY and its ability to increase the antifungal effect of MN were investigated in vitro and in vivo.

STUDY DESIGN AND METHODS

MY or/and MN were incorporated into a thermosensitive hydrogel (TSH) of poloxamer. The safety of MY or/and MN loaded TSHs towards human umbilical vein endothelial cells (HUVEC) was evaluated by a MTT assay and the in vivo safety towards mice knees was confirmed by histopathological examination. The anti-biofilm effect of MY and its ability to increase the antifungal effect of MN were investigated in vitro with C. albicans ATCC 10231 by broth microdilution method, crystal violet staining and scanning electron microscopy (SEM), as well as in vivo in an established mouse model of periprosthetic joint infection (PJI) by SEM, histological analysis, microorganism culture and detection of the serum levels of interleukin-6 (IL-6). The mechanism of action of MY was analyzed by qRT-PCR assay with C. albicans SC5314.

RESULTS

Our results showed that MY and MN incorporated into TSHs exhibited good stability and safety, excellent temperature sensitivity and controlled drug release property. MY (5-640 µg/ml) exhibited no effect on C. albicans cell viability and MY (≥80 µg/ml) showed a significantly inhibitory effect on biofilm formation. MIC₅₀ (the lowest concentrations of drugs resulting in 50% decrease of C. albicans growth) and MIC₈₀ (the lowest concentrations of drugs resulting in 80% decrease of C. albicans growth) of MN were respectively decreased from 2 µg/ml to 0.5 µg/ml and from 4 µg/ml to 2 µg/ml when used in combination with MY (80 µg/ml). The mouse PJI was effectively prevented by MY and MN incorporated into TSH.

CONCLUSIONS

Local application of MY and MN incorporated into TSH might be useful for clinical biofilm-associated infections.

Influence of Dental Prosthesis and Restorative Materials Interface on Oral Biofilms

Oral biofilms attach onto both teeth surfaces and dental material surfaces in oral cavities. In the meantime, oral biofilms are not only the pathogenesis of dental caries and periodontitis, but also secondary caries and peri-implantitis, which would lead to the failure of clinical treatments. The material surfaces exposed to oral conditions can influence pellicle coating, initial bacterial adhesion, and biofilm formation, due to their specific physical and chemical characteristics. To define the effect of physical and chemical characteristics of dental prosthesis and restorative material on oral biofilms, we discuss resin-based composites, glass ionomer cements, amalgams, dental alloys, ceramic, and dental implant material surface properties. In conclusion, each particular chemical composition (organic matrix, inorganic filler, fluoride, and various metallic ions) can enhance or inhibit biofilm formation. Irregular topography and rough surfaces provide favorable interface for bacterial colonization, protecting bacteria against shear forces during their initial reversible binding and biofilm formation. Moreover, the surface free energy, hydrophobicity, and surface-coating techniques, also have a significant influence on oral biofilms. However, controversies still exist in the current research for the different methods and models applied. In addition, more in situ studies are needed to clarify the role and mechanism of each surface parameter on oral biofilm development.

Effect of sucrose on biofilm formed in situ on titanium material

BACKGROUND

Because sucrose may change the composition of biofilms formed on dental surfaces, the aim of this study was to evaluate in situ the effect of this dietary sugar on biofilm formation on titanium surface.

METHODS

In this blind, crossover, in situ study, 10 volunteers wore, in 3 phases of 7 days each, a palatal appliance containing titanium specimens. In each phase, the specimens were treated extraorally with 20% sucrose solution at a frequency of 4 or 8 times per day. As control, no treatment was rendered (0×). At the end of each phase, the biofilms were collected for biochemical analysis of biofilm wet weight (biomass), protein concentration, soluble (S-EPS), and insoluble (I-EPS) extracellular polysaccharides and intracellular polysaccharides (IPS), and for microbiologic analysis by checkerboard DNA-DNA hybridization (for levels and proportions of 40 bacterial species). Biochemical data were analyzed by linear regression and microbiological findings by Friedman and Dunn tests (α = .05).

RESULTS

A positive significant linear relationship was found among sucrose exposure (0×, 4×, and 8×) and biomass, S-EPS, I-EPS and IPS (p < 0.05). The biofilms treated with sucrose (4× and/or 8×) presented higher mean total levels of the 40 bacterial species evaluated, higher proportions of red complex species and lower proportions of the host-compatible green complex species, in comparison with the control group (p < 0.05).

CONCLUSION

The findings of the present study suggest that daily sucrose exposure has a harmful effect on the composition of biofilms formed on titanium surfaces.

Soft Lithography and Minimally Human Invasive Technique for Rapid Screening of Oral Biofilm Formation on New Microfabricated Dental Material Surfaces

Introduction

Microfabrication offers opportunities to study surface concepts focused to reduce bacterial adhesion on implants using human minimally invasive rapid screening (hMIRS). Wide information is available about cell/biomaterial interactions using eukaryotic and prokaryotic cells on surfaces of dental materials with different topographies, but studies using human being are still limited.

Objective

To evaluate a synergy of microfabrication and hMIRS to study the bacterial adhesion on micropatterned surfaces for dental materials.

Materials and Methods

Micropatterned and flat surfaces on biomedical PDMS disks were produced by soft lithography. The hMIRS approach was used to evaluate the total oral bacterial adhesion on PDMS surfaces placed in the oral cavity of five volunteers (the study was approved by the University Ethical Committee). After 24 h, the disks were analyzed using MTT assay and light microscopy.

Results

In the present pilot study, microwell structures were microfabricated on the PDMS surface via soft lithography with a spacing of 5 µm. Overall, bacterial adhesion did not significantly differ between the flat and micropatterned surfaces. However, individual analysis of two subjects showed greater bacterial adhesion on the micropatterned surfaces than on the flat surfaces.

Significance

Microfabrication and hMIRS might be implemented to study the cell/biomaterial interactions for dental materials.

Effects of Two Diode Lasers With and Without Photosensitization on Contaminated Implant Surfaces: An Ex Vivo Study

OBJECTIVE

The aim of this ex vivo study is to assess decontamination potential of two different diode laser wavelengths, with or without the aid of photodynamic therapy, on dental implant surfaces and to evaluate the harmful potential of temperature increase during laser irradiation.

MATERIALS AND METHODS

One hundred thirty-two machined sterile implants were placed into sterile porcine bone blocks with standardized coronal angular bony defects and inoculated with Streptococcus sanguinis. Four different treatment protocols were used: 810 or 980 nm laser, with or without photosensitization. Two nontreated control groups were used, one with samples coated with indocyanine green dye. Samples were rinsed and plated on agar plates for subsequent colony count. Irradiation was repeated without contamination at room temperature and in a 37°C water bath monitoring the temperature variation.

RESULTS

There is a statistically significant decontamination effect when the laser is used. Both wavelengths minimize contamination. There was modest improvement given by the photosensitization being more marked in the 810 nm groups, but was not statistically significant compared to laser only. A critical temperature increase was never observed when the sample was in a 37°C water bath.

CONCLUSIONS

The use of both diode laser wavelengths in implant surface decontamination was efficacious regardless of the use of photosensitization and without dangerous increase of temperature.

Effects of magnolol and honokiol on adhesion, yeast-hyphal transition, and formation of biofilm by Candida albicans

Background

The first step in infection by Candida albicans is adhesion to host cells or implanted medical devices and this followed by hyphal growth and biofilm formation. Yeast-to-hyphal transition has long been identified as a key factor in fungal virulence. Following biofilm formation, C. albicans is usually less sensitive or insensitive to antifungals. Therefore, development of new antifungals with inhibitory action on adhesion, yeast-hyphal transition and biofilm formation by C. albicans is very necessary.

Methods

The effects of magnolol and honokiol on hypha growth were investigated using different induction media. Their inhibitory effects were determined using the 2,3-bis(2-methoxy-4-nitro-5-sulfophenyl)-2H-tetrazolium-5- carboxanilide assay, and biofilm thickness and viability were observed by a confocal scanning laser microscope. Mammalian cells were used in adhesion assays. Genes related to hyphae development and cell adhesions were analyzed by real-time reverse transcription-polymerase chain reaction. The exogenous cyclic adenosine monophosphate was used to determine the mechanisms of action of magnolol and honokiol. Caenorhabditis elegans was used as an in vivo model to estimate the antifungal activities of magnolol and honokiol.

Results and conclusions

Magnolol and honokiol inhibited adhesion, the transition from yeast to hypha, and biofilm formation by C. albicans through the Ras1-cAMP-Efg1 pathway. Moreover, magnolol and honokiol prolonged the survival of nematodes infected by C. albicans. Magnolol and honokiol have potential inhibitory effects against biofilm formation by C. albicans.

General Significance

This study provides useful information towards the development of new strategies to reduce the incidence of C. albicans biofilm-associated infection.

The Relationship between Biofilm and Physical-Chemical Properties of Implant Abutment Materials for Successful Dental Implants

The aim of this review was to investigate the relationship between biofilm and peri-implant disease, with an emphasis on the types of implant abutment surfaces. Individuals with periodontal disease typically have a large amount of pathogenic microorganisms in the periodontal pocket. If the individuals lose their teeth, these microorganisms remain viable inside the mouth and can directly influence peri-implant microbiota. Metal implants offer a suitable solution, but similarly, these remaining bacteria can adhere on abutment implant surfaces, induce peri-implantitis causing potential destruction of the alveolar bone near to the implant threads and cause the subsequent loss of the implant. Studies have demonstrated differences in biofilm formation on dental materials and these variations can be associated with both physical and chemical characteristics of the surfaces. In the case of partially edentulous patients affected by periodontal disease, the ideal type of implant abutments utilized should be one that adheres the least or negligible amounts of periodontopathogenic bacteria. Therefore, it is of clinically relevance to know how the bacteria behave on different types of surfaces in order to develop new materials and/or new types of treatment surfaces, which will reduce or inhibit adhesion of pathogenic microorganisms, and, thus, restrict the use of the abutments with indication propensity for bacterial adhesion.