Examining the correlates and drivers of human population distributions across low- and middle-income countries

Comparing built-up area datasets to assess urban exposure to coastal hazards in Europe

Information on urban land use, beyond the urban-rural dichotomy, can improve the assessment of potential impacts of coastal hazards by refining estimates of damages and supporting adaptation planning. However, the lack of a consistent definition of "urban" in previous studies has led to exposure estimates that vary considerably. Here, we explore the sensitivity of exposed population and built-up area in four settlement types, defined by four different built-up area datasets. We find large differences in the exposed population of up to 65% (127 million people) in the "Urban" class. The exposure estimates are highly sensitive to the density thresholds used to distinguish the settlement types, with a difference in exposed urban population of up to 53.5 million people when the threshold varies by 10%. We attribute the high sensitivity of the exposure estimates to the varying definitions of built-up area of the underlying datasets. We argue that the definition of urban land is crucial for coastal impact assessments and make recommendations for the use of the analyzed datasets.

A simulated 'sandbox' for exploring the modifiable areal unit problem in aggregation and disaggregation

We present a spatial testbed of simulated boundary data based on a set of very high-resolution census-based areal units surrounding Guadalajara, Mexico. From these input areal units, we simulated 10 levels of spatial resolutions, ranging from levels with 5,515-52,388 units and 100 simulated zonal configurations for each level - totalling 1,000 simulated sets of areal units. These data facilitate interrogating various realizations of the data and the effects of the spatial coarseness and zonal configurations, the Modifiable Areal Unit Problem (MAUP), on applications such as model training, model prediction, disaggregation, and aggregation processes. Further, these data can facilitate the production of spatially explicit, non-parametric estimates of confidence intervals via bootstrapping. We provide a pre-processed version of these 1,000 simulated sets of areal units, meta- and summary data to assist in their use, and a code notebook with the means to alter and/or reproduce these data.

High-resolution gridded population datasets for Latin America and the Caribbean using official statistics

"Leaving no one behind" is the fundamental objective of the 2030 Agenda for Sustainable Development. Latin America and the Caribbean is marked by social inequalities, whilst its total population is projected to increase to almost 760 million by 2050. In this context, contemporary and spatially detailed datasets that accurately capture the distribution of residential population are critical to appropriately inform and support environmental, health, and developmental applications at subnational levels. Existing datasets are under-utilised by governments due to the non-alignment with their own statistics. Therefore, official statistics at the finest level of administrative units available have been implemented to construct an open-access repository of high-resolution gridded population datasets for 40 countries in Latin American and the Caribbean. These datasets are detailed here, alongside the 'top-down' approach and methods to generate and validate them. Population distribution datasets for each country were created at a resolution of 3 arc-seconds (approximately 100 m at the equator), and are all available from the WorldPop Data Repository.

Agripreneurship as a panacea for food security in Tanzania: A systematic review

Agripreneurship as one of the means to ensure food security in Tanzania has received scant attention. This study bridges the knowledge gap by showing the state of the art on agripreneurship and food security in Tanzania, research themes and new developments on the two concepts, showing literature gaps and practise on the concepts, and showing how agripreneurship is a solution to food insecurity in Tanzania. Herein, a total of 61 articles retrieved from Scopus, Google Scholar, and the Web of Science databases on the themes of agripreneurship and food security were reviewed. This study has demonstrated agripreneurship techniques can be a solution to food security by ensuring food availability, accessibility, and affordability. Thus, it is recommended to the policymakers that they formulate a policy that focuses on both supply-side and demand-side factors. Furthermore, agripreneurs are urged to update their knowledge and skills so that they can access timely information through ICT tools, mostly TV, radio, and phone.

Drivers of African Filovirus (Ebola and Marburg) Outbreaks

Outbreaks of African filoviruses often have high mortality, including more than 11,000 deaths among 28,562 cases during the West Africa Ebola outbreak of 2014-2016. Numerous studies have investigated the factors that contributed to individual filovirus outbreaks, but there has been little quantitative synthesis of this work. In addition, the ways in which the typical causes of filovirus outbreaks differ from other zoonoses remain poorly described. In this study, we quantify factors associated with 45 outbreaks of African filoviruses (ebolaviruses and Marburg virus) using a rubric of 48 candidate causal drivers. For filovirus outbreaks, we reviewed >700 peer-reviewed and gray literature sources and developed a list of the factors reported to contribute to each outbreak (i.e., a "driver profile" for each outbreak). We compare and contrast the profiles of filovirus outbreaks to 200 background outbreaks, randomly selected from a global database of 4463 outbreaks of bacterial and viral zoonotic diseases. We also test whether the quantitative patterns that we observed were robust to the influences of six covariates, country-level factors such as gross domestic product, population density, and latitude that have been shown to bias global outbreak data. We find that, regardless of whether covariates are included or excluded from models, the driver profile of filovirus outbreaks differs from that of background outbreaks. Socioeconomic factors such as trade and travel, wild game consumption, failures of medical procedures, and deficiencies in human health infrastructure were more frequently reported in filovirus outbreaks than in the comparison group. Based on our results, we also present a review of drivers reported in at least 10% of filovirus outbreaks, with examples of each provided.

Dasymetric population mapping based on US census data and 30-m gridded estimates of impervious surface

Assessment of socio-environmental problems and the search for solutions often require intersecting geospatial data on environmental factors and human population densities. In the United States, Census data is the most common source for information on population. However, timely acquisition of such data at sufficient spatial resolution can be problematic, especially in cases where the analysis area spans urban-rural gradients. With this data release, we provide a 30-m resolution population estimate for the contiguous United States. The workflow dasymetrically distributes Census block level population estimates across all non-transportation impervious surfaces within each Census block. The methodology is updatable using the most recent Census data and remote sensing-based observations of impervious surface area. The dataset, known as the U.G.L.I (updatable gridded lightweight impervious) population dataset, compares favorably against other population data sources, and provides a useful balance between resolution and complexity.

Measurement(s)	Population Density
Technology Type(s)	satellite imaging
Sample Characteristic - Organism	Homo sapiens
Sample Characteristic - Environment	populated place
Sample Characteristic - Location	contiguous United States of America

Biodiversity and Economy but Not Social Factors Predict Human Population Dynamics in South Africa

The ongoing exponential growth of human population poses a risk to sustainable development goals (SDGs). Unless we understand the drivers of this growth and inform policy development accordingly, SDGs would remain a dream. One of the old theories of population growth known as the Malthusian theory predicts that resource availability drives population growth until a certain time when population growth outrun resource availability, leading to all sort of crises summarized as Malthusian crisis. Although the link between economic growth and population has been widely investigated while testing the theory, little is known about environmental and social factors potentially driving population growth. Here, because of various crises of our time recalling the Malthusian crisis, we revisited the theory by fitting structural equation models to environmental, social and economic data collected over 30-year period in South Africa. None of the social variables tested predicts population growth. Instead, we found that biodiversity (species protection index) correlates positively with population growth. Biodiversity provides various resources through ecosystem goods and services to human, thus supporting population growth as predicted in the Malthusian theory. However, we also found that this population growth may lead to conservation conflict as we found that biodiversity habitat (wetland area) correlates negatively with population growth, thus raising the compromising effect of population growth on life on earth. What’s more, we found a significant link between economic growth measured as GDP and population growth, further supporting the Malthusian prediction. Overall, our study re-affirms the value of biodiversity to human and suggests that the Malthusian theory should continuously be tested with predictors other than economic.

The Ratio of the Land Consumption Rate to the Population Growth Rate: A Framework for the Achievement of the Spatiotemporal Pattern in Poland and Lithuania

Indicator 11.3. 1 of the 2030 sustainable development goals (SDG) 11, i.e., the ratio of the land use to the population growth rate, is currently classified by the United Nations as a Tier II indicator, as there is a globally-accepted methodology for its calculation, but the data are not available, nor are not regularly updated. Recently, the increased availability of remotely sensed data and products allows not only for the calculation of the SDG 11.3. 1, but also for its monitoring at different levels of detail. That is why this study aims to address the interrelationships between population development and land use changes in Poland and Lithuania, two neighboring countries in Central and Eastern Europe, using the publicly available remotely sensed products, CORINE land cover and GHS-POP. The paper introduces a map modelling process that starts with data transformation through GIS analyses and results in the geovisualisation of the LCRPGR (land use efficiency), the PGR (population growth rate), and the LCR (land use rate). We investigated the spatial patterns of the index values by utilizing hotspot analyses, autocorrelations, and outlier analyses. The results show how the indicators’ values were concentrated in both countries; the average value of SDG 11.3. 1, from 2000 to 2018 in Poland amounted to 0.115 and, in Lithuania, to −0.054. The average population growth ratio (PGR) in Poland equaled 0.0132, and in Lithuania, it was −0.0067, while the average land consumption ratios (LCRs) were 0.0462 and 0.0067, respectively. Areas with an increase in built-up areas were concentrated mainly on the outskirts of large cities, whereas outliers of the LCRPGR index were mainly caused by the uncertainty of the source data and the way the indicator is interpreted.

Which Gridded Population Data Product Is Better? Evidences from Mainland Southeast Asia (MSEA)

The release of global gridded population datasets, including the Gridded Population of the World (GPW), Global Human Settlement Population Grid (GHS-POP), WorldPop, and LandScan, have greatly facilitated cross-comparison for ongoing research related to anthropogenic impacts. However, little attention is paid to the consistency and discrepancy of these gridded products in the regions with rapid changes in local population, e.g., Mainland Southeast Asia (MSEA), where the countries have experienced fast population growth since the 1950s. This awkward situation is unsurprisingly aggravated because of national scarce demographics and incomplete census counts, which further limits their appropriate usage. Thus, comparative analyses of them become the priority of their better application. Here, the consistency and discrepancy of the four common global gridded population datasets were cross-compared by combing the 2015 provincial population statistics (census and yearbooks) via error-comparison based statistical methods. The results showed that: (1) the LandScan performs the best both in spatial accuracy and estimated errors, then followed by the WorldPop, GHS-POP, and GPW in MSEA. (2) Provincial differences in estimated errors indicated that the LandScan better reveals the spatial pattern of population density in Thailand and Vietnam, while the WorldPop performs slightly better in Myanmar and Laos, and both fit well in Cambodia. (3) Substantial errors among the four gridded datasets normally occur in the provincial units with larger population density (over 610 persons/km2) and a rapid population growth rate (greater than 1.54%), respectively. The new findings in MSEA indicated that future usage of these datasets should pay attention to the estimated population in the areas characterized by high population density and rapid population growth.

Using big data for evaluating development outcomes: A systematic map

BACKGROUND

Policy makers need access to reliable data to monitor and evaluate the progress of development outcomes and targets such as sustainable development outcomes (SDGs). However, significant data and evidence gaps remain. Lack of resources, limited capacity within governments and logistical difficulties in collecting data are some of the reasons for the data gaps. Big data-that is digitally generated, passively produced and automatically collected-offers a great potential for answering some of the data needs. Satellite and sensors, mobile phone call detail records, online transactions and search data, and social media are some of the examples of big data. Integrating big data with the traditional household surveys and administrative data can complement data availability, quality, granularity, accuracy and frequency, and help measure development outcomes temporally and spatially in a number of new ways.The study maps different sources of big data onto development outcomes (based on SDGs) to identify current evidence base, use and the gaps. The map provides a visual overview of existing and ongoing studies. This study also discusses the risks, biases and ethical challenges in using big data for measuring and evaluating development outcomes. The study is a valuable resource for evaluators, researchers, funders, policymakers and practitioners in their effort to contributing to evidence informed policy making and in achieving the SDGs.

OBJECTIVES

Identify and appraise rigorous impact evaluations (IEs), systematic reviews and the studies that have innovatively used big data to measure any development outcomes with special reference to difficult contexts.

SEARCH METHODS

A number of general and specialised data bases and reporsitories of organisations were searched using keywords related to big data by an information specialist.

SELECTION CRITERIA

The studies were selected on basis of whether they used big data sources to measure or evaluate development outcomes.

DATA COLLECTION AND ANALYSIS

Data collection was conducted using a data extraction tool and all extracted data was entered into excel and then analysed using Stata. The data analysis involved looking at trends and descriptive statistics only.

MAIN RESULTS

The search yielded over 17,000 records, which we then screened down to 437 studies which became the foundation of our systematic map. We found that overall, there is a sizable and rapidly growing number of measurement studies using big data but a much smaller number of IEs. We also see that the bulk of the big data sources are machine-generated (mostly satellites) represented in the light blue. We find that satellite data was used in over 70% of the measurement studies and in over 80% of the IEs.

AUTHORS' CONCLUSIONS

This map gives us a sense that there is a lot of work being done to develop appropriate measures using big data which could subsequently be used in IEs. Information on costs, ethics, transparency is lacking in the studies and more work is needed in this area to understand the efficacies related to the use of big data. There are a number of outcomes which are not being studied using big data, either due to the lack to applicability such as education or due to lack of awareness about the new methods and data sources. The map points to a number of gaps as well as opportunities where future researchers can conduct research.

Implications for Tracking SDG Indicator Metrics with Gridded Population Data

Achieving the seventeen United Nations Sustainable Development Goals (SDGs) requires accurate, consistent, and accessible population data. Yet many low- and middle-income countries lack reliable or recent census data at the sufficiently fine spatial scales needed to monitor SDG progress. While the increasing abundance of Earth observation-derived gridded population products provides analysis-ready population estimates, end users lack clear use criteria to track SDGs indicators. In fact, recent comparisons of gridded population products identify wide variation across gridded population products. Here we present three case studies to illuminate how gridded population datasets compare in measuring and monitoring SDGs to advance the “fitness for use” guidance. Our focus is on SDG 11.5, which aims to reduce the number of people impacted by disasters. We use five gridded population datasets to measure and map hazard exposure for three case studies: the 2015 earthquake in Nepal; Cyclone Idai in Mozambique, Malawi, and Zimbabwe (MMZ) in 2019; and flash flood susceptibility in Ecuador. First, we map and quantify geographic patterns of agreement/disagreement across gridded population products for Nepal, MMZ, and Ecuador, including delineating urban and rural populations estimates. Second, we quantify the populations exposed to each hazard. Across hazards and geographic contexts, there were marked differences in population estimates across the gridded population datasets. As such, it is key that researchers, practitioners, and end users utilize multiple gridded population datasets—an ensemble approach—to capture uncertainty and/or provide range estimates when using gridded population products to track SDG indicators. To this end, we made available code and globally comprehensive datasets that allows for the intercomparison of gridded population products.

Evaluating the Accuracy of Gridded Population Estimates in Slums: A Case Study in Nigeria and Kenya

Low- and middle-income country cities face unprecedented urbanization and growth in slums. Gridded population data (e.g., ~100 × 100 m) derived from demographic and spatial data are a promising source of population estimates, but face limitations in slums due to the dynamic nature of this population as well as modelling assumptions. In this study, we compared field-referenced boundaries and population counts from Slum Dwellers International in Lagos (Nigeria), Port Harcourt (Nigeria), and Nairobi (Kenya) with nine gridded population datasets to assess their statistical accuracy in slums. We found that all gridded population estimates vastly underestimated population in slums (RMSE: 4958 to 14,422, Bias: −2853 to −7638), with the most accurate dataset (HRSL) estimating just 39 per cent of slum residents. Using a modelled map of all slums in Lagos to compare gridded population datasets in terms of SDG 11.1.1 (percent of population living in deprived areas), all gridded population datasets estimated this indicator at just 1–3 per cent compared to 56 per cent using UN-Habitat’s approach. We outline steps that might improve that accuracy of each gridded population dataset in deprived urban areas. While gridded population estimates are not yet sufficiently accurate to estimate SDG 11.1.1, we are optimistic that some could be used in the future following updates to their modelling approaches.

High-Resolution Gridded Population Datasets: Exploring the Capabilities of the World Settlement Footprint 2019 Imperviousness Layer for the African Continent

The field of human population mapping is constantly evolving, leveraging the increasing availability of high-resolution satellite imagery and the advancements in the field of machine learning. In recent years, the emergence of global built-area datasets that accurately describe the extent, location, and characteristics of human settlements has facilitated the production of new population grids, with improved quality, accuracy, and spatial resolution. In this research, we explore the capabilities of the novel World Settlement Footprint 2019 Imperviousness layer (WSF2019-Imp), as a single proxy in the production of a new high-resolution population distribution dataset for all of Africa—the WSF2019-Population dataset (WSF2019-Pop). Results of a comprehensive qualitative and quantitative assessment indicate that the WSF2019-Imp layer has the potential to overcome the complexities and limitations of top-down binary and multi-layer approaches of large-scale population mapping, by delivering a weighting framework which is spatially consistent and free of applicability restrictions. The increased thematic detail and spatial resolution (~10 m at the Equator) of the WSF2019-Imp layer improve the spatial distribution of populations at local scales, where fully built-up settlement pixels are clearly differentiated from settlement pixels that share a proportion of their area with green spaces, such as parks or gardens. Overall, eighty percent of the African countries reported estimation accuracies with percentage mean absolute errors between ~15% and ~32%, and 50% of the validation units in more than half of the countries reported relative errors below 20%. Here, the remaining lack of information on the vertical dimension and the functional characterisation of the built-up environment are still remaining limitations affecting the quality and accuracy of the final population datasets.

Measuring the contribution of built-settlement data to global population mapping

Top-down population modelling has gained applied prominence in public health, planning, and sustainability applications at the global scale. These top-down population modelling methods often rely on remote-sensing (RS) derived representation of the built-environment and settlements as key predictive covariates. While these RS-derived data, which are global in extent, have become more advanced and more available, gaps in spatial and temporal coverage remain. These gaps have prompted the interpolation of the built-environment and settlements, but the utility of such interpolated data in further population modelling applications has garnered little research. Thus, our objective was to determine the utility of modelled built-settlement extents in a top-down population modelling application. Here we take modelled global built-settlement extents between 2000 and 2012, created using a spatio-temporal disaggregation of observed settlement growth. We then demonstrate the applied utility of such annually modelled settlement data within the application of annually modelling population, using random forest informed dasymetric disaggregations, across 172 countries and a 13-year period. We demonstrate that the modelled built-settlement data are consistently the 2nd most important covariate in predicting population density, behind annual lights at night, across the globe and across the study period. Further, we demonstrate that this modelled built-settlement data often provides more information than current annually available RS-derived data and last observed built-settlement extents.

Mapping Changing Population Distribution on the Qinghai–Tibet Plateau since 2000 with Multi-Temporal Remote Sensing and Point-of-Interest Data

Advanced developments have been achieved in urban human population estimation, however, there is still a considerable research gap for the mapping of remote rural populations. In this study, based on demographic data at the town-level, multi-temporal high-resolution remote sensing data, and local population-sensitive point-of-interest (POI) data, we tailored a random forest-based dasymetric approach to map population distribution on the Qinghai–Tibet Plateau (QTP) for 2000, 2010, and 2016 with a spatial resolution of 1000 m. We then analyzed the temporal and spatial change of this distribution. The results showed that the QTP has a sparse population distribution overall; in large areas of the northern QTP, the population density is zero, accounting for about 14% of the total area of the QTP. About half of the QTP showed a rapid increase in population density between 2000 and 2016, mainly located in the eastern and southern parts of Qinghai Province and the central-eastern parts of the Tibet Autonomous Region. Regarding the relative importance of variables in explaining population density, the variables “Distance to Temples” is the most important, followed by “Density of Villages” and “Elevation”. Furthermore, our new products exhibited higher accuracy compared with five recently released gridded population density datasets, namely WorldPop, Gridded Population of the World version 4, and three national gridded population datasets for China. Both the root-mean-square error (RMSE) and mean absolute error (MAE) for our products were about half of those of the compared products except for WorldPop. This study provides a reference for using fine-scale demographic count and local population-sensitive POIs to model changing population distribution in remote rural areas.

Using GIS and Machine Learning to Classify Residential Status of Urban Buildings in Low and Middle Income Settings

Utilising satellite images for planning and development is becoming a common practice as computational power and machine learning capabilities expand. In this paper, we explore the use of satellite image derived building footprint data to classify the residential status of urban buildings in low and middle income countries. A recently developed ensemble machine learning building classification model is applied for the first time to the Democratic Republic of the Congo, and to Nigeria. The model is informed by building footprint and label data of greater completeness and attribute consistency than have previously been available for these countries. A GIS workflow is described that semiautomates the preparation of data for input to the model. The workflow is designed to be particularly useful to those who apply the model to additional countries and use input data from diverse sources. Results show that the ensemble model correctly classifies between 85% and 93% of structures as residential and nonresidential across both countries. The classification outputs are likely to be valuable in the modelling of human population distributions, as well as in a range of related applications such as urban planning, resource allocation, and service delivery.

Human activities and elevational constraints restrict ranging patterns of snub-nosed monkeys in a mountainous refuge

Both natural conditions and anthropogenic factors affect the survivability, distribution, and population density of wildlife. To understand the extent and how these factors drive species distributions, a detailed description of animal movement patterns in natural habitats is needed. In this study, we used satellite telemetry to monitor elevational ranges favored by endangered golden snub-nosed monkeys (Rhinopithecus roxellana), in the Qinling Mountains, central China. We investigated the abundance and distribution of food resources through sampling vegetation quadrats at different elevations and sampled anthropogenic activities using field surveys. Our results indicated that although there was no significant variation in food resources between low- (<1500 m) and middle-elevations (1500-2200 m), monkeys were found most often in areas above 1500 m, where there was less anthropogenic development (e.g. houses and roads); however, monkeys rarely ranged above 2200 m and had limited food availability at this altitude. There was limited human disturbance at this elevation. We suggest that both human activity and ecological constraints (i.e. food resources) have considerable effects on elevational use of R. roxellana in the Qinling Mountains. This study highlights the critical roles these factors can play in shaping the vertical distribution of high-altitude primates. This research provides useful insights for habitat-based conservation plans in which human disturbance management and habitat restoration should be prioritized.

The heterogeneity and change in the urban structure of metropolitan areas in the United States, 1990-2010

While the population of the United States has been predominantly urban for nearly 100 years, periodic transformations of the concepts and measures that define urban places and population have taken place, complicating over-time comparisons. We compare and combine data series of officially-designated urban areas, 1990-2010, at the census block-level within Metropolitan Statistical Areas (MSAs) with a satellite-derived consistent series on built-up area from the Global Human Settlement Layer to create urban classes that characterize urban structure and provide estimates of land and population. We find considerable heterogeneity in urban form across MSAs, even among those of similar population size, indicating the inherent difficulties in urban definitions. Over time, we observe slightly declining population densities and increasing land and population in areas captured only by census definitions or low built-up densities, constrained by the geography of place. Nevertheless, deriving urban proxies from satellite-derived built-up areas is promising for future efforts to create spatio-temporally consistent measures for urban land to guide urban demographic change analysis.

Missing millions: undercounting urbanization in India

The measurement and characterization of urbanization crucially depends upon defining what counts as urban. The government of India estimates that only 31% of the population is urban. We show that this is an artifact of the definition of urbanity and an underestimate of the level of urbanization in India. We use a random forest-based model to create a high-resolution (~ 100 m) population grid from district-level data available from the Indian Census for 2001 and 2011, a novel application of such methods to create temporally consistent population grids. We then apply a community-detection clustering algorithm to construct urban agglomerations for the entire country. Compared with the 2011 official statistics, we estimate 12% more of urban population, but find fewer mid-size cities. We also identify urban agglomerations that span jurisdictional boundaries across large portions of Kerala and the Gangetic Plain.

New Perspectives for Mapping Global Population Distribution Using World Settlement Footprint Products

In the production of gridded population maps, remotely sensed, human settlement datasets rank among the most important geographical factors to estimate population densities and distributions at regional and global scales. Within this context, the German Aerospace Centre (DLR) has developed a new suite of global layers, which accurately describe the built-up environment and its characteristics at high spatial resolution: (i) the World Settlement Footprint 2015 layer (WSF-2015), a binary settlement mask; and (ii) the experimental World Settlement Footprint Density 2015 layer (WSF-2015-Density), representing the percentage of impervious surface. This research systematically compares the effectiveness of both layers for producing population distribution maps through a dasymetric mapping approach in nine low-, middle-, and highly urbanised countries. Results indicate that the WSF-2015-Density layer can produce population distribution maps with higher qualitative and quantitative accuracies in comparison to the already established binary approach, especially in those countries where a good percentage of building structures have been identified within the rural areas. Moreover, our results suggest that population distribution accuracies could substantially improve through the dynamic preselection of the input layers and the correct parameterisation of the Settlement Size Complexity (SSC) index.

Improved Estimates of Population Exposure in Low-Elevation Coastal Zones of China

With sea level predicted to rise and the frequency and intensity of coastal flooding expected to increase due to climate change, high-resolution gridded population datasets have been extensively used to estimate the size of vulnerable populations in low-elevation coastal zones (LECZ). China is the most populous country, and populations in its LECZ grew rapidly due to urbanization and remarkable economic growth in coastal areas. In assessing the potential impacts of coastal hazards, the spatial distribution of population exposure in China’s LECZ should be examined. In this study, we propose a combination of multisource remote sensing images, point-of-interest data, and machine learning methods to improve the performance of population disaggregation in coastal China. The resulting population grid map of coastal China for the reference year 2010, with a spatial resolution of 100 × 100 m, is presented and validated. Then, we analyze the distribution of population in LECZ by overlaying the new gridded population data and LECZ footprints. Results showed that the total population exposed in China’s LECZ in 2010 was 158.2 million (random forest prediction) and 160.6 million (Cubist prediction), which account for 12.17% and 12.36% of the national population, respectively. This study also showed the considerable potential in combining geospatial big data for high-resolution population estimation.

Multi-Scale Estimation of Land Use Efficiency (SDG 11.3.1) across 25 Years Using Global Open and Free Data

Sustainable Development Goal (SDG) 11 aspires to “Make cities and human settlements inclusive, safe, resilient and sustainable”, and the introduction of an explicit urban goal testifies to the importance of urbanisation. The understanding of the process of urbanisation and the capacity to monitor the SDGs require a wealth of open, reliable, locally yet globally comparable data, and a fully-fledged data revolution. In this framework, the European Commission–Joint Research Centre has developed a suite of (open and free) data and tools named Global Human Settlement Layer (GHSL) which maps the human presence on Earth (built-up areas, population distribution and settlement typologies) between 1975 and 2015. The GHSL supplies information on the progressive expansion of built-up areas on Earth and population dynamics in human settlements, with both sources of information serving as baseline data to quantify land use efficiency (LUE), listed as a Tier II indicator for SDG 11 (11.3.1). In this paper, we present the profile of the LUE across several territorial scales between 1990 and 2015, highlighting diverse development trajectories and the land take efficiency of different human settlements. Our results show that (i) the GHSL framework allows us to estimate LUE for the entire planet at several territorial scales, opening the opportunity of lifting the LUE indicator from its Tier II classification; (ii) the current formulation of the LUE is substantially subject to path dependency; and (iii) it requires additional spatially-explicit metrics for its interpretation. We propose the Achieved Population Density in Expansion Areas and the Marginal Land Consumption per New Inhabitant metrics for this purpose. The study is planetary and multi-temporal in coverage, demonstrating the value of well-designed, open and free, fine-scale geospatial information on human settlements in supporting policy and monitoring progress made towards meeting the SDGs.

An Improved Global Analysis of Population Distribution in Proximity to Active Volcanoes, 1975–2015

Better and more detailed analyses of global human exposure to hazards and associated disaster risk require improved geoinformation on population distribution and densities. In particular, issues of temporal and spatial resolution are important for determining the capacity for assessing changes in these distributions. We combine the best-available global population grids with latest data on volcanoes, to assess and characterize the worldwide distribution of population from 1975–2015 in relation to recent volcanism. Both Holocene volcanoes and those where there is evidence of significant eruptions are considered. A comparative analysis is conducted for the volcanic hot spots of Southeast Asia and Central America. Results indicate that more than 8% of the world’s 2015 population lived within 100 km of a volcano with at least one significant eruption, and more than 1 billion people (14.3%) lived within 100 km of a Holocene volcano, with human concentrations in this zone increasing since 1975 above the global population growth rate. While overall spatial patterns of population density have been relatively stable in time, their variation with distance is not monotonic, with a higher concentration of people between 10 and 20 km from volcanoes. We find that in last 40 years in Southeast Asia the highest population growth rates have occurred in close proximity to volcanoes (within 10 km), whereas in Central America these are observed farther away (beyond 50 km), especially after 1990 and for Holocene volcanoes.

Global spatio-temporally harmonised datasets for producing high-resolution gridded population distribution datasets

Multi-temporal, globally consistent, high-resolution human population datasets provide consistent and comparable population distributions in support of mapping sub-national heterogeneities in health, wealth, and resource access, and monitoring change in these over time. The production of more reliable and spatially detailed population datasets is increasingly necessary due to the importance of improving metrics at sub-national and multi-temporal scales. This is in support of measurement and monitoring of UN Sustainable Development Goals and related agendas. In response to these agendas, a method has been developed to assemble and harmonise a unique, open access, archive of geospatial datasets. Datasets are provided as global, annual time series, where pertinent at the timescale of population analyses and where data is available, for use in the construction of population distribution layers. The archive includes sub-national census-based population estimates, matched to a geospatial layer denoting administrative unit boundaries, and a number of co-registered gridded geospatial factors that correlate strongly with population presence and density. Here, we describe these harmonised datasets and their limitations, along with the production workflow. Further, we demonstrate applications of the archive by producing multi-temporal gridded population outputs for Africa and using these to derive health and development metrics. The geospatial archive is available at https://doi.org/10.5258/SOTON/WP00650.

Improved population mapping for China using remotely sensed and points-of-interest data within a random forests model

Remote sensing image products (e.g. brightness of nighttime lights and land cover/land use types) have been widely used to disaggregate census data to produce gridded population maps for large geographic areas. The advent of the geospatial big data revolution has created additional opportunities to map population distributions at fine resolutions with high accuracy. A considerable proportion of the geospatial data contains semantic information that indicates different categories of human activities occurring at exact geographic locations. Such information is often lacking in remote sensing data. In addition, the remarkable progress in machine learning provides toolkits for demographers to model complex nonlinear correlations between population and heterogeneous geographic covariates. In this study, a typical type of geospatial big data, points-of-interest (POIs), was combined with multi-source remote sensing data in a random forests model to disaggregate the 2010 county-level census population data to 100 × 100 m grids. Compared with the WorldPop population dataset, our population map showed higher accuracy. The root mean square error for population estimates in Beijing, Shanghai, Guangzhou, and Chongqing for this method and WorldPop were 27,829 and 34,193, respectively. The large under-allocation of the population in urban areas and over-allocation in rural areas in the WorldPop dataset was greatly reduced in this new population map. Apart from revealing the effectiveness of POIs in improving population mapping, this study promises the potential of geospatial big data for mapping other socioeconomic parameters in the future.

Improving Urban Population Distribution Models with Very-High Resolution Satellite Information

Built-up layers derived from medium resolution (MR) satellite information have proven their contribution to dasymetric mapping, but suffer from important limitations when working at the intra-urban level, mainly due to their difficulty in capturing the whole range of variation in terms of built-up densities. In this regard, very-high resolution (VHR) remote sensing is known for its ability to better capture small variations in built-up densities and to derive detailed urban land use, which plead in favor of its use when mapping urban populations. In this paper, we compare the added value of various combinations of VHR data sets, compared to a MR one. A top-down dasymetric mapping strategy is applied to reallocate population counts from administrative units into a regular 100 × 100 m grid, according to different weighting layers. These weighting layers are created from MR and/or VHR input data, using simple built-up proportion or reallocation “weights”, obtained from a set of multiple ancillary data used to train a Random Forest regression model. The results reveal that (1) a built-up mask derived from VHR can improve the accuracy of the reallocation by roughly 13%, compared to MR; (2) using VHR land-use information alone results in lower accuracy than using a MR built-up mask; and (3) there is a clear complementarity between VHR land cover and land use.

Linking Synthetic Populations to Household Geolocations: A Demonstration in Namibia

Whether evaluating gridded population dataset estimates (e.g., WorldPop, LandScan) or household survey sample designs, a population census linked to residential locations are needed. Geolocated census microdata data, however, are almost never available and are thus best simulated. In this paper, we simulate a close-to-reality population of individuals nested in households geolocated to realistic building locations. Using the R simPop package and ArcGIS, multiple realizations of a geolocated synthetic population are derived from the Namibia 2011 census 20% microdata sample, Namibia census enumeration area boundaries, Namibia 2013 Demographic and Health Survey (DHS), and dozens of spatial covariates derived from publicly available datasets. Realistic household latitude-longitude coordinates are manually generated based on public satellite imagery. Simulated households are linked to latitude-longitude coordinates by identifying distinct household types with multivariate k-means analysis and modelling a probability surface for each household type using Random Forest machine learning methods. We simulate five realizations of a synthetic population in Namibia’s Oshikoto region, including demographic, socioeconomic, and outcome characteristics at the level of household, woman, and child. Comparison of variables in the synthetic population were made with 2011 census 20% sample and 2013 DHS data by primary sampling unit/enumeration area. We found that synthetic population variable distributions matched observed observations and followed expected spatial patterns. We outline a novel process to simulate a close-to-reality microdata census geolocated to realistic building locations in a low- or middle-income country setting to support spatial demographic research and survey methodological development while avoiding disclosure risk of individuals.

Methods of Population Spatialization Based on the Classification Information of Buildings from China's First National Geoinformation Survey in Urban Area: A Case Study of Wuchang District, Wuhan City, China

Most of the currently mature methods that are used globally for population spatialization are researched on a single level, and are dependent on the spatial relationship between population and land covers (city, road, water area, etc.), resulting in difficulties in data acquisition and an inability to identify precise features on the different levels. This paper proposes a multi-level population spatialization method on the different administrative levels with the support of China’s first national geoinformation survey, and then considers several approaches to verify the results of the multi-level method. This paper aims to establish a multi-level population spatialization method that is suitable for the administrative division of districts and streets. It is assumed that the same residential house has the same population density on the district level. Based on this assumption, the least squares regression model is used to obtain the optimized prediction model and accurate population space prediction results by dynamically segmenting and aggregating house categories.In addition, it is assumed that the distribution of the population is relatively regular in communities that are spatially close to each other, and that the population densities on the street level are similar, so the average population density is assessed by optimizing the community and surrounding residential houses on the street level. Finally, the scientificalness and rationality of the proposed method is proved by spatial autocorrelation analysis, overlay analysis, cross-validation analysis and accuracy assessment methods.

Spatially disaggregated population estimates in the absence of national population and housing census data

Population numbers at local levels are fundamental data for many applications, including the delivery and planning of services, election preparation, and response to disasters. In resource-poor settings, recent and reliable demographic data at subnational scales can often be lacking. National population and housing census data can be outdated, inaccurate, or missing key groups or areas, while registry data are generally lacking or incomplete. Moreover, at local scales accurate boundary data are often limited, and high rates of migration and urban growth make existing data quickly outdated. Here we review past and ongoing work aimed at producing spatially disaggregated local-scale population estimates, and discuss how new technologies are now enabling robust and cost-effective solutions. Recent advances in the availability of detailed satellite imagery, geopositioning tools for field surveys, statistical methods, and computational power are enabling the development and application of approaches that can estimate population distributions at fine spatial scales across entire countries in the absence of census data. We outline the potential of such approaches as well as their limitations, emphasizing the political and operational hurdles for acceptance and sustainable implementation of new approaches, and the continued importance of traditional sources of national statistical data.