The use of extruded finite-element models as a novel alternative to tomography-based models: a case study using early mammal jaws

Morphological diversity of saber-tooth upper canines and its functional implications

Elongated upper canine teeth, commonly known as saber-teeth, have evolved three times within the sub-order Feliformia. The species that wielded them flourished throughout the Cenozoic and have historically been separated into two morphological groups: the dirk-tooths with longer, flatter canines, and the scimitar-tooths with shorter, serrated teeth. However, quantitative morphological analysis has not been conducted on these teeth to determine the true amount of diversity within the group, and how the upper canine morphology of extant feliforms compared to their extinct relatives has also not been explored. Using Geometric Morphometric analysis, it is shown that saber-tooth upper canine morphology is exceptionally diverse, with no extant clade having all its members occupy the same morphospace based on tooth length and curvature. Instead, a neutral basal morphospace is observed for all groups and diversification from this basal position is seen as species become more derived. A distinct and consistent scimitar tooth morphology is also not observed within the morphospace. When compared with extant taxa, several saber-tooth species are seen to be morphologically similar to extant feliforms, several of which exhibit novel dietary strategies in comparison to the obligate carnivore felids. Biomechanical analyses of different actual and theoretical tooth shapes demonstrate that saber-teeth upper canines further represent a functional compromise between sharpness, curvature, and length on the one hand, and robustness and material investment on the other.

Quantitative investigation of pengornithid enantiornithine diet reveals macrocarnivorous ecology evolved in birds by Early Cretaceous

The diet of Mesozoic birds is poorly known, limiting evolutionary understanding of birds' roles in modern ecosystems. Pengornithidae is one of the best understood families of Mesozoic birds, hypothesized to eat insects or only small amounts of meat. We investigate these hypotheses with four lines of evidence: estimated body mass, claw traditional morphometrics, jaw mechanical advantage, and jaw finite element analysis. Owing to limited data, the diets of Eopengornis and Chiappeavis remain obscure. Pengornis, Parapengornis, and Yuanchuavis show adaptations for vertebrate carnivory. Pengornis also has talons similar to living raptorial birds like caracaras that capture and kill large prey, which represents the earliest known adaptation for macrocarnivory in a bird. This supports the appearance of this ecology ∼35 million years earlier than previously thought. These findings greatly increase the niche breadth known for Early Cretaceous birds, and shift the prevailing view that Mesozoic birds mainly occupied low trophic levels.

Does the model reflect the system? When two-dimensional biomechanics is not 'good enough'

Models are mathematical representations of systems, processes or phenomena. In biomechanics, finite-element modelling (FEM) can be a powerful tool, allowing biologists to test form-function relationships in silico, replacing or extending results of in vivo experimentation. Although modelling simplifications and assumptions are necessary, as a minimum modelling requirement the results of the simplified model must reflect the biomechanics of the modelled system. In cases where the three-dimensional mechanics of a structure are important determinants of its performance, simplified two-dimensional modelling approaches are likely to produce inaccurate results. The vertebrate mandible is one among many three-dimensional anatomical structures routinely modelled using two-dimensional FE analysis. We thus compare the stress regimes of our published three-dimensional model of the chimpanzee mandible with a published two-dimensional model of the chimpanzee mandible and identify several fundamental differences. We then present a series of two-dimensional and three-dimensional FE modelling experiments that demonstrate how three key modelling parameters, (i) dimensionality, (ii) symmetric geometry, and (iii) constraints, affect deformation and strain regimes of the models. Our results confirm that, in the case of the primate mandible (at least), two-dimensional FEM fails to meet this minimum modelling requirement and should not be used to draw functional, ecological or evolutionary conclusions.

Trapped in the morphospace: The relationship between morphological integration and functional performance

The evolution of complex morphological structures can be characterized by the interplay between different anatomical regions evolving under functional integration in response to shared selective pressures. Using the highly derived humeral morphology of talpid moles as a model, here we test whether functional performance is linked to increased levels of evolutionary integration between humerus subunits and, if so, what the strength is of the relationship. Combining two-dimensional geometric morphometrics, phylogenetic comparative methods, and functional landscape modeling, we demonstrate that the high biomechanical performance of subterranean moles' humeri is coupled with elevated levels of integration, whereas taxa with low-performance values show intermediate or low integration. Theoretical morphs occurring in high-performance areas of the functional landscape are not occupied by any species, and show a marked drop in covariation levels, suggesting the existence of a strong relationship between integration and performance in the evolution of talpid moles' humeri. We argue that the relative temporal invariance of the subterranean environment may have contributed to stabilize humeral morphology, trapping subterranean moles in a narrow region of the landscape and impeding any attempt to reposition on a new ascending slope.

Discrete element models for understanding the biomechanics of fossorial animals

The morphological features of fossorial animals have continuously evolved in response to the demands of survival. However, existing methods for animal burrowing mechanics are not capable of addressing the large deformation of substrate. The discrete element method (DEM) is able to overcome this limitation. In this study, we used DEM to develop a general model to simulate the motion of an animal body part and its interaction with the substrate. The DEM also allowed us to easily change the forms of animal body parts to examine how those different forms affected the biomechanical functions. These capabilities of the DEM were presented through a case study of modeling the burrowing process of North American Badger. In the case study, the dynamics (forces, work, and soil displacements) of burrowing were predicted for different forms of badger claw and manus, using the model. Results showed that when extra digits are added to a manus, the work required for a badger to dig increases considerably, while the mass of soil dug only increases gradually. According to the proposed efficiency index (ratio of the amount of soil dug to the work required), the modern manus with 5 digits has indeed biomechanical advantage for their fossorial lifestyle, and the current claw curvature (25.3 mm in radius) is indeed optimal. The DEM is able to predict biomechanical relationships between functions and forms for any fossorial animals. Results can provide biomechanical evidences for explaining how the selective pressures for functions influence the morphological evolution in fossorial animals.

The efficacy of computed tomography scanning versus surface scanning in 3D finite element analysis

Finite element analysis (FEA) is a commonly used application in biomechanical studies of both extant and fossil taxa to assess stress and strain in solid structures such as bone. FEA can be performed on 3D structures that are generated using various methods, including computed tomography (CT) scans and surface scans. While previous palaeobiological studies have used both CT scanned models and surface scanned models, little research has evaluated to what degree FE results may vary when CT scans and surface scans of the same object are compared. Surface scans do not preserve the internal geometries of 3D structures, which are typically preserved in CT scans. Here, we created 3D models from CT scans and surface scans of the same specimens (crania and mandibles of a Nile crocodile, a green sea turtle, and a monitor lizard) and performed FEA under identical loading parameters. It was found that once surface scanned models are solidified, they output stress and strain distributions and model deformations comparable to their CT scanned counterparts, though differing by notable stress and strain magnitudes in some cases, depending on morphology of the specimen and the degree of reconstruction applied. Despite similarities in overall mechanical behaviour, surface scanned models can differ in exterior shape compared to CT scanned models due to inaccuracies that can occur during scanning and reconstruction, resulting in local differences in stress distribution. Solid-fill surface scanned models generally output lower stresses compared to CT scanned models due to their compact interiors, which must be accounted for in studies that use both types of scans.

Diet of Mesozoic toothed birds (Longipterygidae) inferred from quantitative analysis of extant avian diet proxies

Background

Birds are key indicator species in extant ecosystems, and thus we would expect extinct birds to provide insights into the nature of ancient ecosystems. However, many aspects of extinct bird ecology, particularly their diet, remain obscure. One group of particular interest is the bizarre toothed and long-snouted longipterygid birds. Longipterygidae is the most well-understood family of enantiornithine birds, the dominant birds of the Cretaceous period. However, as with most Mesozoic birds, their diet remains entirely speculative.

Results

To improve our understanding of longipterygids, we investigated four proxies in extant birds to determine diagnostic traits for birds with a given diet: body mass, claw morphometrics, jaw mechanical advantage, and jaw strength via finite element analysis. Body mass of birds tended to correspond to the size of their main food source, with both carnivores and herbivores splitting into two subsets by mass: invertivores or vertivores for carnivores, and granivores + nectarivores or folivores + frugivores for herbivores. Using claw morphometrics, we successfully distinguished ground birds, non-raptorial perching birds, and raptorial birds from one another. We were unable to replicate past results isolating subtypes of raptorial behaviour. Mechanical advantage was able to distinguish herbivorous diets with particularly high values of functional indices, and so is useful for identifying these specific diets in fossil taxa, but overall did a poor job of reflecting diet. Finite element analysis effectively separated birds with hard and/or tough diets from those eating foods which are neither, though could not distinguish hard and tough diets from one another. We reconstructed each of these proxies in longipterygids as well, and after synthesising the four lines of evidence, we find all members of the family but Shengjingornis (whose diet remains inconclusive) most likely to be invertivores or generalist feeders, with raptorial behaviour likely in Longipteryx and Rapaxavis.

Conclusions

This study provides a 20% increase in quantitatively supported fossil bird diets, triples the number of diets reconstructed in enantiornithine species, and serves as an important first step in quantitatively investigating the origins of the trophic diversity of living birds. These findings are consistent with past hypotheses that Mesozoic birds occupied low trophic levels.

Supplementary Information

The online version contains supplementary material available at 10.1186/s12915-022-01294-3.

Topology-Based Three-Dimensional Reconstruction of Delicate Skeletal Fossil Remains and the Quantification of Their Taphonomic Deformation

Taphonomic and diagenetic processes inevitably distort the original skeletal morphology of fossil vertebrate remains. Key aspects of palaeobiological datasets may be directly impacted by such morphological deformation, such as taxonomic diagnoses and phylogenetic hypotheses, interpretations of the shape and orientation of anatomical structures, and assessments of interspecific and intraspecific variation. In order to overcome these ubiquitous challenges we present a novel reconstruction workflow combining retopology and retrodeformation, allowing the original morphology of both symmetrically and asymmetrically damaged areas of fossils to be reconstructed. As case studies, we present idealised three-dimensional reconstructions of the sternum of the crownward stem-bird Ichthyornis dispar, and cervical vertebrae of the diplodocid sauropod Galeamopus pabsti. Multiple Ichthyornis sterna were combined into a single, idealised composite representation through superimposition and alignment of retopologised models, and this composite was subsequently retrodeformed. The Galeamopus vertebrae were individually retrodeformed and symmetrised. Our workflow enabled us to quantify deformation of individual specimens with respect to our reconstructions, and to characterise global and local taphonomic deformation. Our workflow can be integrated with geometric morphometric approaches to enable quantitative morphological comparisons among multiple specimens, as well as quantitative interpolation of “mediotypes” of serially homologous elements such as missing vertebrae, haemal arches, or ribs.

Increasing morphological disparity and decreasing optimality for jaw speed and strength during the radiation of jawed vertebrates

The Siluro-Devonian adaptive radiation of jawed vertebrates, which underpins almost all living vertebrate biodiversity, is characterized by the evolutionary innovation of the lower jaw. Multiple lines of evidence have suggested that the jaw evolved from a rostral gill arch, but when the jaw took on a feeding function remains unclear. We quantified the variety of form in the earliest jaws in the fossil record from which we generated a theoretical morphospace that we then tested for functional optimality. By drawing comparisons with the real jaw data and reconstructed jaw morphologies from phylogenetically inferred ancestors, our results show that the earliest jaw shapes were optimized for fast closure and stress resistance, inferring a predatory feeding function. Jaw shapes became less optimal for these functions during the later radiation of jawed vertebrates. Thus, the evolution of jaw morphology has continually explored previously unoccupied morphospace and accumulated disparity through time, laying the foundation for diverse feeding strategies and the success of jawed vertebrates.

Macroevolutionary trends in theropod dinosaur feeding mechanics

Theropod dinosaurs underwent some of the most remarkable dietary changes in vertebrate evolutionary history, shifting from ancestral carnivory^1-3 to hypercarnivory^4,5 and omnivory/herbivory,^6-9 with some taxa eventually reverting to carnivory.^10-12 The mandible is an important tool for food acquisition in vertebrates and reflects adaptations to feeding modes and diets.^13,14 The morphofunctional modifications accompanying the dietary changes in theropod dinosaurs are not well understood because most of the previous studies focused solely on the cranium and/or were phylogenetically limited in scope,^12,15-21 while studies that include multiple clades are usually based on linear measurements and/or discrete osteological characters.^8,22 Given the potential relationship between macroevolutionary change and ontogenetic pattern,²³ we explore whether functional morphological patterns observed in theropod mandibular evolution show similarities to the ontogenetic trajectory. Here, we use finite element analysis to study the mandibles of non-avialan coelurosaurian theropods and demonstrate how feeding mechanics vary between dietary groups and major clades. We reveal an overall reduction in feeding-induced stresses along all theropod lineages through time. This is facilitated by a post-dentary expansion and the development of a downturned dentary in herbivores and an upturned dentary in carnivores likely via the "curved bone effect." We also observed the same reduction in feeding-induced stress in an ontogenetic series of jaws of the tyrannosaurids Tarbosaurus and Tyrannosaurus, which is best attributed to bone functional adaptation. This suggests that this common tendency for structural strengthening of the theropod mandible through time, irrespective of diet, is linked to "functional peramorphosis" of bone functional adaptations acquired during ontogeny.

True colours or red herrings?: colour maps for finite-element analysis in palaeontological studies to enhance interpretation and accessibility

Accessibility is a key aspect for the presentation of research data. In palaeontology, new data is routinely obtained with computational techniques, such as finite-element analysis (FEA). FEA is used to calculate stress and deformation in objects when subjected to external forces. Results are displayed using contour plots in which colour information is used to convey the underlying biomechanical data. The Rainbow colour map is nearly exclusively used for these contour plots in palaeontological studies. However, numerous studies in other disciplines have shown the Rainbow map to be problematic due to uneven colour representation and its inaccessibility for those with colour vision deficiencies. Here, different colour maps were tested for their accuracy in representing values of FEA models. Differences in stress magnitudes (ΔS) and colour values (ΔE) of subsequent points from the FEA models were compared and their correlation was used as a measure of accuracy. The results confirm that the Rainbow colour map is not well suited to represent the underlying stress distribution of FEA models with other colour maps showing a higher discriminative power. As the performance of the colour maps varied with tested scenarios/stress types, it is recommended to use different colour maps for specific purposes.

The diet of early birds based on modern and fossil evidence and a new framework for its reconstruction

Birds are some of the most diverse organisms on Earth, with species inhabiting a wide variety of niches across every major biome. As such, birds are vital to our understanding of modern ecosystems. Unfortunately, our understanding of the evolutionary history of modern ecosystems is hampered by knowledge gaps in the origin of modern bird diversity and ecosystem ecology. A crucial part of addressing these shortcomings is improving our understanding of the earliest birds, the non-avian avialans (i.e. non-crown birds), particularly of their diet. The diet of non-avian avialans has been a matter of debate, in large part because of the ambiguous qualitative approaches that have been used to reconstruct it. Here we review methods for determining diet in modern and fossil avians (i.e. crown birds) as well as non-avian theropods, and comment on their usefulness when applied to non-avian avialans. We use this to propose a set of comparable, quantitative approaches to ascertain fossil bird diet and on this basis provide a consensus of what we currently know about fossil bird diet. While no single approach can precisely predict diet in birds, each can exclude some diets and narrow the dietary possibilities. We recommend combining (i) dental microwear, (ii) landmark-based muscular reconstruction, (iii) stable isotope geochemistry, (iv) body mass estimations, (v) traditional and/or geometric morphometric analysis, (vi) lever modelling, and (vii) finite element analysis to reconstruct fossil bird diet accurately. Our review provides specific methodologies to implement each approach and discusses complications future researchers should keep in mind. We note that current forms of assessment of dental mesowear, skull traditional morphometrics, geometric morphometrics, and certain stable isotope systems have yet to be proven effective at discerning fossil bird diet. On this basis we report the current state of knowledge of non-avian avialan diet which remains very incomplete. The ancestral dietary condition in non-avian avialans remains unclear due to scarce data and contradictory evidence in Archaeopteryx. Among early non-avian pygostylians, Confuciusornis has finite element analysis and mechanical advantage evidence pointing to herbivory, whilst Sapeornis only has mechanical advantage evidence indicating granivory, agreeing with fossilised ingested material known for this taxon. The enantiornithine ornithothoracine Shenqiornis has mechanical advantage and pedal morphometric evidence pointing to carnivory. In the hongshanornithid ornithuromorph Hongshanornis only mechanical advantage evidence indicates granivory, but this agrees with evidence of gastrolith ingestion in this taxon. Mechanical advantage and ingested fish support carnivory in the songlingornithid ornithuromorph Yanornis. Due to the sparsity of robust dietary assignments, no clear trends in non-avian avialan dietary evolution have yet emerged. Dietary diversity seems to increase through time, but this is a preservational bias associated with a predominance of data from the Early Cretaceous Jehol Lagerstätte. With this new framework and our synthesis of the current knowledge of non-avian avialan diet, we expect dietary knowledge and evolutionary trends to become much clearer in the coming years, especially as fossils from other locations and climates are found. This will allow for a deeper and more robust understanding of the role birds played in Mesozoic ecosystems and how this developed into their pivotal role in modern ecosystems.

Quantifying bite force in coexisting tayassuids and feral suids: a comparison between morphometric functional proxies and in vivo measurements

Background

Measuring mammals’ bite force in laboratory conditions is not a simple task, let alone on wild medium-sized mammals in the field. Thus, morphometric-proxies are usually used to infer morphofunctional properties of musculoskeletal features. For instance, the study of bite force-indexes suggests that different capacities to crack food items reduce the competition between coexistent collared and white-lipped peccaries (Pecari tajacu and Tayassu pecari). The presence of exotic feral hogs (Sus scrofa) in peccaries’ endemic areas gives rise to new ecological interactions between them. An example is the Brazilian Pantanal wetland, where ecomorphological mechanisms may play a role in their ecological relations. Taking this scenario as a case of study, we aimed to verify if the morphometric-proxies are de facto reliable tools, by comparing bite forces-indexes with the in vivo bite forces of these species.

Methods

We captured 21 collared and white-lipped peccaries and feral hogs in the Brazilian Pantanal to assess their bite force at first molar. The Bite Force Measuring Tube (BiTu) is a robust and simple mechanical device designed to be used in field conditions. Only 11 individuals successfully bit the BiTu before being released. Their body measurements were compared and correlated with their bite force. The in vivo bite forces were compared with bite force-indexes of two papers based on independent morphometric methods and datasets: Sicuro & Oliveira (2002) used classic morphometrics to infer the bite forces of these three species in the Brazilian Pantanal, and Hendges et al. (2019) used geometric morphometrics to compare bite forces-indexes and feeding habits of the extant peccary species. The results of all species were standardized (Z-curves) according to each method. Doing so, we obtained comparable dimensionless comparable values but maintaining the differences between them.

Results

The morphometric-proxies-based studies presented similar results: collared peccaries present weaker bites than white-lipped peccaries and feral hogs, while these two species presented no significant differences in their bite force-indexes. The in vivo bite force results suggest the same relations predicted by the morphometric models, including the high variation among the feral hogs. We found a significant correlation between the individuals’ weight (kg) and their actual bite force (N) but no significant correlations with the head length.

Conclusions

The BiTu proved to be a functional and low-cost tool to measure bite force in field conditions. The in vivo results presented a good correspondence with the predictions based on morphometric-proxies by Sicuro & Oliveira (2002) and Hendges et al. (2019). The results denote that these studies succeed in capturing the biomechanical signal of the three species’ skull-jaw systems. This empirical validation confirms that these morphometric-proxies analyses are reliable methods to ecomorphological and evolutionary inferences.

Rethinking the use of finite element simulations in comparative biomechanics research

In the past 15 years, the finite element (FE) method has become a ubiquitous tool in the repertoire of evolutionary biologists. The method is used to estimate and compare biomechanical performance implicated as selective factors in the evolution of morphological structures. A feature common to many comparative studies using 3D FE simulations is small taxonomic sample sizes. The time-consuming nature of FE model construction is considered a main limiting factor in taxonomic breadth of comparative FE analyses. Using a composite FE model dataset, I show that the combination of small taxonomic sample sizes and comparative FE data in analyses of evolutionary associations of biomechanical performance to feeding ecology generates artificially elevated correlations. Such biases introduce false positives into interpretations of clade-level trends. Considering this potential pitfall, recommendations are provided to consider the ways FE analyses are best used to address both taxon-specific and clade-level evolutionary questions.

Biomechanics of juvenile tyrannosaurid mandibles and their implications for bite force: Evolutionary biology

The tyrannosaurids are among the most well-studied dinosaurs described by science, and analysis of their feeding biomechanics allows for comparison between established tyrannosaurid genera and across ontogeny. 3D finite element analysis (FEA) was used to model and quantify the mechanical properties of the mandibles (lower jaws) of three tyrannosaurine tyrannosaurids of different sizes. To increase evolutionary scope and context for 3D tyrannosaurine results, a broader sample of validated 2D mandible FEA enabled comparisons between ontogenetic stages of Tyrannosaurus rex and other large theropods. It was found that mandibles of small juvenile and large subadult tyrannosaurs experienced lower stress overall because muscle forces were relatively lower, but experienced greater simulated stresses at decreasing sizes when specimen muscle force is normalized. The strain on post-dentary ligaments decreases stress and strain in the posterior region of the dentary and where teeth impacted food. Tension from the lateral insertion of the looping m. ventral pterygoid muscle increases compressive stress on the angular but may decrease anterior bending stress on the mandible. Low mid-mandible bending stresses are congruent with ultra-robust teeth and high anterior bite force in adult T. rex. Mandible strength increases with size through ontogeny in T. rex and phylogenetically among other tyrannosaurids, in addition to that tyrannosaurid mandibles exceed the mandible strength of other theropods at equivalent ramus length. These results may indicate separate predatory strategies used by juvenile and mature tyrannosaurids; juvenile tyrannosaurids lacked the bone-crunching bite of adult specimens and hunted smaller prey, while adult tyrannosaurids fed on larger prey.

Biomechanical insights into the dentition of megatooth sharks (Lamniformes: Otodontidae)

The evolution of gigantism in extinct otodontid sharks was paralleled by a series of drastic modifications in their dentition including widening of the crowns, loss of lateral cusplets, and acquisition of serrated cutting edges. These traits have generally been interpreted as key functional features that enabled the transition from piscivory to more energetic diets based on marine mammals, ultimately leading to the evolution of titanic body sizes in the most recent forms (including the emblematic Otodus megalodon). To investigate this hypothesis, we evaluate the biomechanics of the anterior, lateral, and posterior teeth of five otodontid species under different loading conditions by using two-dimensional finite element analysis. Stress distribution patterns are remarkably similar among all models under puncture and draw (i.e., when subjected to vertical and lateral forces, respectively). Contrary to expectation, higher average stress values are detected under both loading scenarios in more recent species. Altogether, this suggests little correlation between tooth morphology and key aspects of biomechanical behaviour in otodontids, making it difficult to frame the morphological trend of their dentitions within an adaptive scenario. We propose that this pattern most likely emerged as a non-functional by-product of heterochronic processes driven by selection towards larger body sizes.

Morphological convergence obscures functional diversity in sabre-toothed carnivores

The acquisition of elongated, sabre-like canines in multiple vertebrate clades during the last 265 Myr represents a remarkable example for convergent evolution. Due to striking superficial similarities in the cranial skeleton, the same or similar skull and jaw functions have been inferred for sabre-toothed species and interpreted as an adaptation to subdue large-bodied prey. However, although some sabre-tooth lineages have been classified into different ecomorphs (dirk-tooths and scimitar-tooths) the functional diversity within and between groups and the evolutionary paths leading to these specializations are unknown. Here, we use a suite of biomechanical simulations to analyse key functional parameters (mandibular gape angle, bending strength, bite force) to compare the functional performance of different groups and to quantify evolutionary rates across sabre-tooth vertebrates. Our results demonstrate a remarkably high functional diversity between sabre-tooth lineages and that different cranial function and prey killing strategies evolved within clades. Moreover, different biomechanical adaptations in coexisting sabre-tooth species further suggest that this functional diversity was at least partially driven by niche partitioning.

Disassociated rhamphotheca of fossil bird Confuciusornis informs early beak reconstruction, stress regime, and developmental patterns

Soft tissue preservation in fossil birds provides a rare window into their anatomy, function, and development. Here, we present an exceptionally-preserved specimen of Confuciusornis which, through Laser-Stimulated Fluorescence imaging, is identified as preserving a disassociated rhamphotheca. Reconstruction of the in vivo position of the rhamphotheca validates the association of the rhamphotheca with two previous confuciusornithid specimens while calling that of a third specimen into question. The ease of dissociation is discussed and proposed with a fourth specimen alongside finite element analysis as evidence for preferential soft-food feeding. However, this proposition remains tentative until there is a better understanding of the functional role of beak attachment in living birds. Differences in post-rostral extent and possibly rhamphotheca curvature between confuciusornithids and modern birds hint at developmental differences between the two. Together, this information provides a wealth of new information regarding the nature of the beak outside crown Aves.