One-dimensional PtO2 at Pt steps: formation and reaction with CO

Construction of Pt─O Sites on Pt Nanoclusters in Silicalite-1 Zeolite for Efficient Catalytic Oxidation of Hydrogen Isotope Gases

The construction, use, and maintenance of tritium-related equipment will inevitably produce tritium-containing radioactive waste gas, and the production of efficient catalysts for tritium removal remains a difficult problem. Herein, silicalite-1 zeolite with entrapped Pt nanoclusters is skillfully post-oxidized at an appropriate temperature, building highly active Pt─O sites on the nanoclusters to achieve efficient oxidation of hydrogen isotopes at low temperatures. The designed Pt─O sites can directly participate in the oxidation reaction of hydrogen isotopes. Compared to the case without Pt─O sites, the presence of these sites significantly reduces the reaction energy barrier to 0.55 eV, enabling the catalyst to achieve a hydrogen conversion rate of 99% at a low temperature of 40 °C. Specifically, the O atoms consumed by the Pt─O sites in the reaction are replaced by O2 gas and this cycle repeats, which is consistent with the Mars-van Krevelen (M-K) theory. This ensures efficient catalytic oxidation of hydrogen isotopes, and provides an astonishingly high conversion rate of 99% in the nearly 34 days restart performance test. The results of this study provide insights into the strategic design of efficient catalysts for hydrogen isotope oxidation.

Resolving active species during the carbon monoxide oxidation over Pt(111) on the microsecond timescale

Catalytic studies traditionally rely on steady-state conditions resulting in time-averaged datasets that do not differentiate between active and spectator species. This limitation can cause misinterpretations of catalytic function, as the signal of short-lived intermediates responsible for producing desired reaction products is often masked by more intense spectator species. Time-resolved ambient pressure X-ray photoelectron spectroscopy (tr-APXPS) mitigates this issue by combining microsecond time resolution under reaction conditions. Using tr-APXPS, we investigate the oxidation of CO over Pt(111) by concurrently tracking reaction products, surface intermediates, and catalyst response. Our findings reveal that chemisorbed oxygen, rather than Pt surface oxide, is the main species reacting with CO to form CO2, supporting a primary Langmuir-Hinshelwood mechanism. The results shed new light on a heavily-debated reaction in catalysis. Beyond using CO pulses to determine active species, we demonstrate how careful tuning of pulsing parameters can be used for dynamic catalyst operation to enhance CO2 formation.

Effect of Dynamic and Preferential Decoration of Pt Catalyst Surfaces by WOx on Hydrodeoxygenation Reactions

Catalysts containing Pt nanoparticles and reducible transition-metal oxides (WOx, NbOx, TiOx) exhibit remarkable selectivity to aromatic products in hydrodeoxygenation (HDO) reactions for biomass valorization, contrasting the undesired aromatic hydrogenation typically observed for metal catalysts. However, the active site(s) responsible for the high selectivity remains elusive. Here, theoretical and experimental analyses are combined to explain the observed HDO reactivity by interrogating the organization of reduced WOx domains on Pt surfaces at sub-monolayer coverage. The SurfGraph algorithm is used to develop model structures that capture the configurational space (∼1000 configurations) for density functional theory (DFT) calculations of a W3O7 trimer on stepped Pt surfaces. Machine-learning models trained on the DFT calculations identify the preferential occupation of well-coordinated Pt sites (≥8 Pt coordination number) by WOx and structural features governing WOx-Pt stability. WOx/Pt/SiO2 catalysts are synthesized with varying W loadings to test the theoretical predictions and relate them to HDO reactivity. Spectroscopy- and microscopy-based catalyst characterizations identify the dynamic and preferential decoration of well-coordinated sites on Pt nanoparticles by reduced WOx species, consistent with theoretical predictions. The catalytic consequences of this preferential decoration on the HDO of a lignin model compound, dihydroeugenol, are clarified. The effect of WOx decoration on Pt nanoparticles for HDO involves WOx inhibition of aromatic ring hydrogenation by preferentially blocking well-coordinated Pt sites. The identification of preferential decoration on specific sites of late-transition-metal surfaces by reducible metal oxides provides a new perspective for understanding and controlling metal-support interactions in heterogeneous catalysis.

CO and O2 Interaction with Kinked Pt Surfaces

We investigate the chemical interaction of carbon monoxide (CO) and oxygen (O2) with kink atoms on steps of platinum crystal surfaces using a specially designed Pt curved sample. We aim at describing the fundamental stages of the CO oxidation reaction, i.e., CO-covered/poisoned stage and O-covered/active stage, at the poorly known kinked Pt facets by probing CO uptake/saturation and O2 saturation, respectively. Based on the systematic analysis that the curved surface allows, and using high-resolution X-ray photoemission, a diversity of terrace and step/kink species are straightforwardly identified and accurately quantified, defining a smooth structural and chemical variation across different crystal planes. In the CO-saturated case, we observe a preferential adsorption at step edges, where the CO coverage reaches a CO molecule per step Pt atom, significantly higher than their close-packed analogous steps with straight terrace termination. For the O-saturated surface, a significantly higher O coverage is observed in kinked planes compared to the Pt(111) surface. While the strong adsorption of CO at the kinked edges points toward a higher ignition temperature of the CO oxidation at kinks as compared to terraces, the large O coverage at steps may lead to an increased reactivity of kinked surfaces during the active stage of the CO oxidation.

Synthesis and Characterization of Carbon-Based Heterogeneous Catalysts for Energy Release of Molecular Solar Thermal Energy Storage Materials

Molecular solar thermal energy storage (MOST) systems are rapidly becoming a feasible alternative to energy storage and net-zero carbon emission heating. MOST systems involve a single photoisomerization pair that incorporates light absorption, storage, and heat release processes in one recurring cycle. Despite significant recent advancements in the field, the catalytic back-reaction from MOST systems remains relatively unexplored. A wide range of applications is possible, contingent on the energy densities of the specific photoisomers. Here, we report platinum-, copper-, and nickel-based heterogeneous catalysts screened in batch conditions for the back-conversion reaction on the cyano-3-(4-methoxyphenyl)-norbornadiene/quadricyclane pair. Catalyst reactivities are investigated using structural characterization, imaging techniques, and spectroscopic analysis. Finally, the thermal stability is also explored for our best-performing catalysts.

Effects of Oxygen Adsorption on the Optical Properties of Ag Nanoparticles

Plasmonic metal nanoparticles are efficient light harvesters with a myriad of sensing- and energy-related applications. For such applications, the optical properties of nanoparticles of metals such as Cu, Ag, and Au can be tuned by controlling the composition, particle size, and shape, but less is known about the effects of oxidation on the plasmon resonances. In this work, we elucidate the effects of O adsorption on the optical properties of Ag particles by evaluating the thermodynamic properties of O-decorated Ag particles with calculations based on the density functional theory and subsequently computing the photoabsorption spectra with a computationally efficient time-dependent density functional theory approach. We identify stable Ag nanoparticle structures with oxidized edges and a quenching of the plasmonic character of the metal particles upon oxidation and trace back this effect to the sp orbitals (or bands) of Ag particles being involved both in the plasmonic excitation and in the hybridization to form bonds with the adsorbed O atoms. Our work has important implications for the understanding and application of plasmonic metal nanoparticles and plasmon-mediated processes under oxidizing environments.

Identification of the surface species in electrochemical promotion: ethylene oxidation over a Pt/YSZ catalyst

The electrochemical promotion of the C₂H₄ + O₂ total oxidation reaction over a Pt catalyst, interfaced to yttrium stabilized zirconia (YSZ), has been studied at 0.25 mbar and T = 650 K using near ambient pressure X-ray photoelectron spectroscopy (NAP-XPS) as an in situ method. The electrochemical promoter effect is linked to the presence of a several layers thick graphitic overlayer that forms on the Pt surface in the presence of C₂H₄. Our NAP-XPS investigation reveals that electrochemical pumping of the Pt/YSZ catalyst, using a positive potential, leads to the spillover of oxygen surface species from the YSZ support onto the surface of the Pt electrode. Based on the XP spectra, the spillover species on Pt is identical to oxygen chemisorbed from the gas-phase.

Adsorbate-assisted migration of the metal atom in atomically dispersed catalysts: An ab initio molecular dynamics study

We present a phenomenological study of dynamical evolution of the active site in atomically dispersed catalysts in the presence of reaction intermediates associated with CO oxidation and low-temperature water-gas shift reaction. Using picosecond ab initio molecular dynamics, we probe the initiation of adsorbate-induced diffusion of atomically dispersed platinum on rutile TiO₂(110). NVT trajectories spanning 5 ps at 500 K reveal that the dynamical stability of the metal atom is governed by its local coordination to the support and adsorbate. Adsorbates that bind the strongest to Pt typically also lead to the fastest diffusion of the metal atom, and all adsorbates weaken Pt-support interactions, resulting in higher diffusion coefficients compared to bare Pt. We note, however, the absence of quantitative correlations between adsorption characteristics (Pt Bader charge, adsorbate binding energy) and ensemble-averaged quantities (diffusion coefficients). A recurring structural motif identified in several trajectories is a near-linear coordination between support oxygen, Pt, and specific adsorbates. These geometries, on account of enhanced metal support interactions, stabilize Pt and inhibit migration over picosecond timescales. We also identify hydrogen bonding events between the adsorbate and support for OH-containing groups. In the case of OH-bound Pt, for instance, we believe that short-lived H-bonds between OH and support promote Pt migration in the beginning of the NVT trajectory, while the subsequent formation of a near-linear geometry stabilizes the Pt atom despite the continued formation of short-lived hydrogen bonds. These observations are consistent with prior studies that report stabilization of isolated metal atoms in the presence of hydroxyl groups.

High-Pressure Scanning Tunneling Microscopy

This is a Review of recent studies on surface structures of crystalline materials in the presence of gases in the mTorr to atmospheric pressure range, which brings surface science into a brand new direction. Surface structure is not only a property of the material but also depends on the environment surrounding it. This Review emphasizes that high/ambient pressure goes hand-in-hand with ambient temperature, because weakly interacting species can be densely covering surfaces at room temperature only when in equilibrium with a sufficiently high gas pressure. At the same time, ambient temperatures help overcome activation barriers that impede diffusion and reactions. Even species with weak binding energy can have residence lifetimes on the surface that allow them to trigger reconstructions of the atomic structure. The consequences of this are far from trivial because under ambient conditions the structure of the surface dynamically adapts to its environment and as a result completely new structures are often formed. This new era of surface science emerged and spread rapidly after the retooling of characterization techniques that happened in the last two decades. This Review is focused on the new surface structures enabled particularly by one of the new tools: high-pressure scanning tunneling microscopy. We will cover several important surfaces that have been intensely scrutinized, including transition metals, oxides, and alloys.

In situ probing of Pt/TiO2 activity in low-temperature ammonia oxidation

NAP-XPS and operando XAS study of Pt/TiO₂ catalysts shows that Pt⁰ species stabilized on TiO₂ surface have the highest activity at low-temperature NH₃ oxidation.

Structural and dynamical properties of water adsorption on PtO2(001)

The structural, dynamical and electronic properties of water molecules on the β-PtO₂(001) surface has been studied using first-principles calculations.

Observing the oxidation of platinum

Despite its importance in oxidation catalysis, the active phase of Pt remains uncertain, even for the Pt(111) single-crystal surface. Here, using a ReactorSTM, the catalytically relevant structures are identified as two surface oxides, different from bulk α-PtO2, previously observed. They are constructed from expanded oxide rows with a lattice constant close to that of α-PtO2, either assembling into spoked wheels, 1-5 bar O2, or closely packed in parallel lines, above 2.2 bar. Both are only ordered at elevated temperatures (400-500 K). The triangular oxide can also form on the square lattice of Pt(100). Under NO and CO oxidation conditions, similar features are observed. Furthermore, both oxides are unstable outside the O2 atmosphere, indicating the presence of active O atoms, crucial for oxidation catalysts.Improving platinum as an oxidation catalyst requires understanding its structure under catalytic conditions. Here, the authors discover that catalytically important surface oxides form only when Pt is exposed to high pressure and temperature, highlighting the need to study catalysts in realistic environments.

Probing surface oxide formations on SiO2-supported platinum nanocatalysts under CO oxidation

Formations of an ultrathin oxide layer on noble metal catalysts affect the characteristics of fundamental molecular behaviours such as adsorption, diffusion, and desorption on their surfaces.

Surface science under reaction conditions: CO oxidation on Pt and Pd model catalysts

Application of surface-science techniques, such as XPS, SXRD, STM, and IR spectroscopy under catalytic reactions conditions yield new structural and chemical information. Recent experiments focusing on CO oxidation over Pt and Pd model catalysts were reviewed.

2D and 3D imaging of the gas phase close to an operating model catalyst by planar laser induced fluorescence

In recent years, efforts have been made in catalysis related surface science studies to explore the possibilities to perform experiments at conditions closer to those of a technical catalyst, in particular at increased pressures. Techniques such as high pressure scanning tunneling/atomic force microscopy (HPSTM/AFM), near ambient pressure x-ray photoemission spectroscopy (NAPXPS), surface x-ray diffraction (SXRD) and polarization-modulation infrared reflection absorption spectroscopy (PM-IRAS) at semi-realistic conditions have been used to study the surface structure of model catalysts under reaction conditions, combined with simultaneous mass spectrometry (MS). These studies have provided an increased understanding of the surface dynamics and the structure of the active phase of surfaces and nano particles as a reaction occurs, providing novel information on the structure/activity relationship. However, the surface structure detected during the reaction is sensitive to the composition of the gas phase close to the catalyst surface. Therefore, the catalytic activity of the sample itself will act as a gas-source or gas-sink, and will affect the surface structure, which in turn may complicate the assignment of the active phase. For this reason, we have applied planar laser induced fluorescence (PLIF) to the gas phase in the vicinity of an active model catalysts. Our measurements demonstrate that the gas composition differs significantly close to the catalyst and at the position of the MS, which indeed should have a profound effect on the surface structure. However, PLIF applied to catalytic reactions presents several beneficial properties in addition to investigate the effect of the catalyst on the effective gas composition close to the model catalyst. The high spatial and temporal resolution of PLIF provides a unique tool to visualize the on-set of catalytic reactions and to compare different model catalysts in the same reactive environment. The technique can be applied to a large number of molecules thanks to the technical development of lasers and detectors over the last decades, and is a complementary and visual alternative to traditional MS to be used in environments difficult to asses with MS. In this article we will review general considerations when performing PLIF experiments, our experimental set-up for PLIF and discuss relevant examples of PLIF applied to catalysis.

Step dynamics and oxide formation during CO oxidation over a vicinal Pd surface

In an attempt to bridge the material and pressure gaps - two major challenges for an atomic scale understanding of heterogeneous catalysis - we employed high-energy surface X-ray diffraction as a tool to study the Pd(553) surface in situ under changing reaction conditions during CO oxidation. The diffraction patterns recorded under CO rich reaction conditions are characteristic for the metallic state of the surface. In an environment with low excess of O2 over the reaction stoichiometry, the surface seems to accommodate oxygen atoms along the steps forming one or several subsequent adsorbate structures and rapidly transforms into a combination of (332), (111) and (331) facets likely providing the room for the formation of a surface oxide. For the case of large excess of O2, the diffraction data show the presence of a multilayer PdO with the [101] crystallographic direction parallel to the [111] and the [331] directions of the substrate. The reconstructions in O2 excess are to a large extent similar to those previously reported for pure O2 exposures by Westerström et al. [R. Westerström et al., Phys. Rev. B: Condens. Matter Mater. Phys., 2007, 76, 155410].

X-ray photoemission analysis of clean and carbon monoxide-chemisorbed platinum(111) stepped surfaces using a curved crystal

Surface chemistry and catalysis studies could significantly gain from the systematic variation of surface active sites, tested under the very same conditions. Curved crystals are excellent platforms to perform such systematics, which may in turn allow to better resolve fundamental properties and reveal new phenomena. This is demonstrated here for the carbon monoxide/platinum system. We curve a platinum crystal around the high-symmetry (111) direction and carry out photoemission scans on top. This renders the spatial core-level imaging of carbon monoxide adsorbed on a ‘tunable' vicinal surface, allowing a straightforward visualization of the rich chemisorption phenomenology at steps and terraces. Through such photoemission images we probe a characteristic elastic strain variation at stepped surfaces, and unveil subtle stress-release effects on clean and covered vicinal surfaces. These results offer the prospect of applying the curved surface approach to rationally investigate the chemical activity of surfaces under real pressure conditions.

Systematic variation of surface sites may allow for more efficient testing of surface chemical reactions. Here, the authors use a platinum curved crystal and, by carrying out photoemission scans, are able to systematically address the fundamental CO-chemisorption process on a ‘tunable' vicinal surface.

Direct Visualization of Catalytically Active Sites at the FeO-Pt(111) Interface

Within the area of surface science, one of the "holy grails" is to directly visualize a chemical reaction at the atomic scale. Whereas this goal has been reached by high-resolution scanning tunneling microscopy (STM) in a number of cases for reactions occurring at flat surfaces, such a direct view is often inhibited for reaction occurring at steps and interfaces. Here we have studied the CO oxidation reaction at the interface between ultrathin FeO islands and a Pt(111) support by in situ STM and density functional theory (DFT) calculations. Time-lapsed STM imaging on this inverse model catalyst in O2 and CO environments revealed catalytic activity occurring at the FeO-Pt(111) interface and directly showed that the Fe-edges host the catalytically most active sites for the CO oxidation reaction. This is an important result since previous evidence for the catalytic activity of the FeO-Pt(111) interface is essentially based on averaging techniques in conjunction with DFT calculations. The presented STM results are in accord with DFT+U calculations, in which we compare possible CO oxidation pathways on oxidized Fe-edges and O-edges. We found that the CO oxidation reaction is more favorable on the oxidized Fe-edges, both thermodynamically and kinetically.

Dispersing Pt and Pd atoms on Au nanoparticles deposited on n-GaN substrates for formic acid oxidation

Au nanoparticles, with dispersed Pt and Pd atoms on them, supported on n-GaN substrates were prepared. The catalysts showed an enhanced performance for formic acid oxidation, and the mass activity reached 3.5 mA μg_PtPd⁻¹.

Surface-step-induced oscillatory oxide growth

We report in situ atomic-resolution transmission electron microscopy observations of the oxidation of stepped Cu surfaces. We find that the presence of surface steps both inhibits oxide film growth and leads to the oxide decomposition, thereby resulting in oscillatory oxide film growth. Using atomistic simulations, we show that the oscillatory oxide film growth is induced by oxygen adsorption on the lower terrace along the step edge, which destabilizes the oxide film formed on the upper terrace.

The Role of Defects in the Local Reaction Kinetics of CO Oxidation on Low-Index Pd Surfaces

The role of artificially created defects and steps in the local reaction kinetics of CO oxidation on the individual domains of a polycrystalline Pd foil was studied by photoemission electron microscopy (PEEM), mass spectroscopy (MS), and scanning tunneling microscopy (STM). The defects and steps were created by STM-controlled Ar+ sputtering and the novel PEEM-based approach allowed the simultaneous determination of local kinetic phase transitions on differently oriented μm-sized grains of a polycrystalline sample. The independent (single-crystal-like) reaction behavior of the individual Pd(hkl) domains in the 10-5 mbar pressure range changes upon Ar+ sputtering to a correlated reaction behavior, and the reaction fronts propagate unhindered across the grain boundaries. The defect-rich surface shows also a significantly higher CO tolerance as reflected by the shift of both the global (MS-measured) and the local (PEEM-measured) kinetic diagrams toward higher CO pressure.

CO-induced smoluchowski ripening of Pt cluster arrays on the graphene/Ir(111) moiré

Regular Pt cluster arrays grown on the moiré template formed by graphene on Ir(111) were tested for their stability with respect to CO gas exposure. Cluster stability and adsorption-induced processes were analyzed as a function of cluster size, with in situ scanning tunneling microscopy and X-ray photoelectron spectroscopy. Small clusters containing fewer than 10 atoms were unstable upon CO adsorption. They sintered through Smoluchowski ripening-cluster diffusion and coalescence-rather than the frequently reported Ostwald ripening mediated by metal-adsorbate complexes. Larger clusters remained immobile upon CO adsorption but became more three-dimensional. Careful analysis of the experimental data complemented by ab initio density functional theory calculations provides insight into the origin of the CO-induced Pt cluster ripening and shape transformations.

Formation of nanometer-sized surface platinum oxide clusters on a stepped Pt(557) single crystal surface induced by oxygen: a high-pressure STM and ambient-pressure XPS study

We studied the oxygen-induced restructuring process on a stepped Pt(557) single crystal surface using high-pressure scanning tunneling microscopy (HP-STM) and ambient-pressure X-ray photoelectron spectroscopy (AP-XPS) at O(2) pressures up to 1 Torr. HP-STM has revealed that nanometer-sized clusters are created on Pt(557) at 1 Torr of O(2) and at room temperature. These clusters are identified as surface Pt oxide by AP-XPS. The appearance of clusters is preceded by the formation of 1D chain structures at the step edges. By using a Pt(111) surface as a reference, it was found that the step sites are the nucleation centers for the formation of surface oxide clusters. These surface oxide clusters disappear and the stepped structure is restored on Pt(557) after evacuating O(2) to 10(-8) Torr. Changes in the surface oxide concentration in response to variations in the O(2) gas pressure are repeatable for several cycles. Our results that small clusters are initiated at step sites at high pressures demonstrate the importance of performing in situ characterization of stepped Pt catalysts under reaction conditions.

Oxidation of Pt(111) under near-ambient conditions

The oxidation of Pt(111) at near-ambient O2 pressures has been followed in situ using x-ray photoelectron spectroscopy (XPS) and ex situ using x-ray absorption spectroscopy (XAS). Polarization-dependent XAS signatures at the O K edge reveal significant temperature- and pressure-dependent changes of the Pt-O interaction. Oxide growth commences via a PtO-like surface oxide that coexists with chemisorbed oxygen, while an ultrathin α-PtO2 trilayer is identified as the precursor to bulk oxidation. These results have important implications for understanding the chemical state of Pt in catalysis.