Capillary condensation in atomic scale friction: how water acts like a glue

Nanosized Contact Enables Faster, Stronger, and Liquid-Saving Capillary Adhesion

The nanocapillary not only contributes to the wet adhesion generated from microscale setae on the feet of many insects, such as beetles and flies, but also plays a critical role in many different fields of science and engineering like nanofabrication, chemical analysis, etc. In spite of long-standing interests and efforts, the exact physical mechanisms of nanoscale capillarity remain unclear. Here, we establish a setae-mimicking artificial system composed of porous nanorod arrays (PNAs), where the dynamic process of wet adhesion can be clearly monitored and revealed, when mineral oil is dynamically transferred to the interface between the tips of PNAs and the contacting surface. The large curvature associated with the nanosize of PNA tips endows three advantages to the insect-inspired wet adhesion: (1) shortening the time required to form stable liquid bridges, (2) enhancing the adhesion strength by 6-10 times, and (3) saving at least half of the secretions after detachment. Extra Laplace pressure and line tension originated from the nanocurved liquid at the PNA tips are responsible for the faster, stronger, and liquid-saving wet adhesion. These findings not only strengthen our understanding of the dynamic capillary effects in insect adhesion but may also offer design strategies in nanoprinting, nanorobots, and self-assembly of nanodevices.

Water Transport Dynamics and Kinetic Equilibria in Nanoblisters at the Graphene-Mica Interface

Nanoscale reduced volumes with novel properties can be produced from 2D materials like graphene. Mild thermal annealing imposes vast and varied amounts of water intercalation into the graphene-mica interface, resulting in the formation of nanoblisters and impacting the local environment for applications such as reactions confined at the solid-solid interface. Atomic force microscopy imaging (AFM) and micro-Fourier transform infrared (micro-FTIR) spectroscopy characterization after 60-120 °C anneals revealed large volumes of water readily intercalate into graphene-mica nanoblisters, elucidating water transport behavior under mild reaction conditions. The inflation and deflation of graphene nanoblisters throughout the annealing process is attributed to the contraction of the graphene capping layer upon cooling from the annealing temperature, due to the independence of nanoblister aspect ratios from nanoblister volume or surface area. The intercalated water volume was estimated by the distended volumes of each nanoblister and exhibit an equilibrium trend established after 2 h of annealing. This water equilibrium occurs at a variety of temperatures, but higher temperatures favor graphene contraction and distention to accommodate larger volumes of water. Nanoblister volumes are set during the cooling process, indicating a kinetic trapping effect that can influence physical properties and reactivity for all systems confined at the graphene-mica interface.

Temperature-Dependent Frictional Behavior of MoS2 in Humid Environments: Insights from Water Molecule Adsorption and DFT Analyses

This study investigates the temperature-dependent frictional behavior of MoS2 in humid environments within the context of a long-standing debate over increased friction due to oxidation processes or molecular adsorption. By combining sliding friction experiments and density functional theory (DFT)-based first-principles simulations, it aims to clarify the role of water molecule adsorption in influencing frictional properties of MoS2, addressing the challenge of identifying interfacial bonding behavior responsible for friction in such conditions. Sliding experiments revealed that magnetron-sputtered MoS2 exhibits a reduction in the coefficient of friction (COF) with an increase in temperature from 25 to 100 °C under 20 and 40% relative humidity. This change in the COF obeys the Arrhenius law, presenting an energy barrier of 0.165 eV, indicative of the temperature-dependent nature of these frictional changes and suggests a consistent frictional mechanism. DFT simulations showed that H2O molecules are adsorbed at MoS2 vacancy defects with adsorption energies ranging from -0.56 to -0.17 eV, which align with the experimentally determined energy barrier. Adsorptive interactions, particularly the formation of stable H···S interfacial hydrogen bonds at defect sites, increase the interlayer adhesion and impede layer shearing. TEM analysis confirms that although MoS2 layers align parallel to the sliding direction in humid conditions, the COF remains at 0.12, as opposed to approximately 0.02 in dry air. This demonstrates that parallel layer alignment does not notably decrease the COF, underscoring humidity's significant role in MoS2's COF values, a result also supported by the Arrhenius analysis. The reversibility of the physisorption process, demonstrated by the recovery of the COF in high-temperature humid environments, suggests its dynamic nature. This study yields fundamental insights into MoS2 interfaces for environments with variable humidity and temperature, crucial for demanding tribological applications.

Coil-to-Bridge Transitions of Self-Assembled Water Chains Observed in a Nanoscopic Meniscus

Ten downward portions in the large oscillatory force-distance curve reported earlier are analyzed to understand a nanoscale water meniscus confined between a sharp probe and a flat substrate in air. The sigmoidal shape of each portion leads to the assumption that the meniscus is made up of n independent transitions of two states: one for a coil state and the other for a bridge state. The analysis reveals that each downward portion occurs due to a coil-to-bridge transition of n self-assembled water chains whose length ranges between 197 and 383 chain units. The transition provides novel insights into water's unique properties like high surface tension and the long-range condensation distances.

Fluctuation of Interfacial Electronic Properties Induces Friction Tuning under an Electric Field

Mysteries about the origin of friction have remained for centuries. Especially, how friction is tuned by an electric field is still unclear. Present tuning mechanisms mainly focus on the atomic configurations and electrostatic force, yet the role of interfacial electronic properties is not fully understood. Here, we investigate a unique friction tuning effect induced by an electric current in a conductive atomic force microscopy experiment and uncover two main tuning mechanisms of friction by the fluctuation of electronic properties during sliding: (1) electric-field-induced electron density redistribution and (2) current-induced electron transfer. We put forward an electronic level friction model unraveling the relationship between the friction tuning and the electronic property fluctuation (EPF) under electric field/current, which is applicable to tribosystems ranging from conductors to semiconductors and insulators, including two-dimensional material interfaces. This model provides theoretical guidance for tribosystem design and friction control, proposing a new perspective in understanding the origin of friction.

Lower reactive oxygen species production and faster swimming speed of human sperm cells on nanodiamond spin-coated glass substrates

The sperm selection stage is what assisted reproductive technologies have in common and is crucial as it affects the success of the treatment cycle. The employment of microfluidic platforms for sperm selection has emerged showing promising results. In microfluidic platforms, sperm cells encounter micro-confined environments meanwhile having contact with channel walls and surfaces. Modification of contact surfaces using nanoparticles leads to the alteration of surface characteristics which in turn affects sperm behavior especially motility which is an indicator for sperm health. In this article, we present the results of investigating the motility parameters of sperm cells in contact with surface-modified glass substrates using nanodiamond particles. The results show that the sperm swimming velocities are significantly improved within the range of 12%-52% compared to the control surface (untreated). Reactive oxygen species production is also decreased by 14% justifying the increase in swimming speed. Taken together, bonding these modified surfaces to sperm selection microfluidic devices could enhance their efficiency and further improve their outcomes offering new solutions to patients facing infertility.

Real-space imaging of nanoparticle transport and interaction dynamics by graphene liquid cell TEM

Thermal motion of colloidal nanoparticles and their cohesive interactions are of fundamental importance in nanoscience but are difficult to access quantitatively, primarily due to the lack of the appropriate analytical tools to investigate the dynamics of individual particles at nanoscales. Here, we directly monitor the stochastic thermal motion and coalescence dynamics of gold nanoparticles smaller than 5 nm, using graphene liquid cell (GLC) transmission electron microscopy (TEM). We also present a novel model of nanoparticle dynamics, providing a unified, quantitative explanation of our experimental observations. The nanoparticles in a GLC exhibit non-Gaussian, diffusive motion, signifying dynamic fluctuation of the diffusion coefficient due to the dynamically heterogeneous environment surrounding nanoparticles, including organic ligands on the nanoparticle surface. Our study shows that the dynamics of nanoparticle coalescence is controlled by two elementary processes: diffusion-limited encounter complex formation and the subsequent coalescence of the encounter complex through rotational motion, where surface-passivating ligands play a critical role.

Dynamics of water condensation on a switchable surface originated from molecular orientations

In heat transfer systems, how water condenses on the surface is critical to the energy efficiency of the system. With fixed surface wettability, hydrophilic surfaces enhance the nucleation rate but result in filmwise condensation due to pinning effect, which impedes the heat transfer between water vapor and surface during droplet growth. A hydrophilic surface with high drop mobility is realized with static tailored wettability surfaces, while tunable surfaces have potential in more comprehensive manipulation in condensation with different scale in time and scale. However, the mechanism has rarely been investigated and elucidated. In this paper, we investigate water condensation on a tunable surface originated from surface tension distribution control. The surface tension distribution under applied electric field is modeled and tested. We demonstrate that the surface tension manipulated by liquid crystal orientation alters the nucleation site density. Also, the periodic surface tension distribution aligns condensed water drops and decelerates the radius growth of droplets. The mechanism of active water condensation manipulation can be further applied to other tunable surfaces for various applications such as atmospheric water generator, heat transfer systems, and desalination systems.

Phase-dependent friction of nanoconfined water meniscus

A water meniscus naturally forms under ambient conditions at the point of contact between a nanoscale tip and an atomically flat substrate. Here, we study the effect of the phase state of this nanoscale meniscus-consisting of coexisting monolayer, bilayer and trilayer phase domains-on the frictional behavior during tip sliding by means of molecular dynamics simulations. While the meniscus experiences a domain-by-domain liquid-to-solid phase transition induced by lateral compression, we observe an evident transition in measured friction curves from continuous sliding to stick-slip and meanwhile a gradual increase in friction forces. Moreover, the stick-slip friction can be modulated by varying lattice orientation of the monolayer ice domain in the meniscus, choosing the sliding direction or applying in-plane strains to the substrate. Our results shed light on the rational design of high-performance micro- and nano-electromechanical systems relying on hydration lubrication.

Probing Changes in Ca2+-Induced Interaction Forces between Calmodulin and Melittin by Atomic Force Microscopy

Mechanobiology studies the means by which physical forces and mechanical properties change intra- or inter- biological macromolecules. Calmodulin (CaM) is involved in physiological activities and various metabolic processes in eukaryotic cells. Although the configuration changes in the interaction between calmodulin and melittin have been studied, the biomechanical relationship of their interaction has rarely been explored. Here, we measured the adhesion forces between calmodulin and melittin in solutions of gradient concentration of calcium ions using atomic force microscopy (AFM). We found that the specific (Fi) and nonspecific (F0) adhesion forces between single melittin and calmodulin in a PBS solution were 69.4 ± 5.0 and 29.3 ± 8.9 pN, respectively. In the presence of 10-7 to 10-3 M Ca2+ PBS solution, the Fi increased significantly to 93.8 ± 5.0, 139.9 ± 9.0, 140.4 ± 9.7, 171.5 ± 9.0, and 213.3 ± 17.8 pN, indicating that the unbinding force between melittin and calmodulin increased in the presence of Ca2+ in a concentration-dependent manner. These findings demonstrated that biomechanical studies based on AFM could help us better understand the melittin/calmodulin-binding processes in the presence of calcium and help us design and screen peptide drugs based on calmodulin.

Superlubricity between Graphite Layers in Ultrahigh Vacuum

Graphite has been conventionally believed to exhibit an inferior lubricating performance with significantly larger friction coefficient and wear rate in a vacuum environment than in ambient air. Dangling bonds at the edge planes of graphite, accounting for the high friction in inert atmosphere are saturated by chemisorbed vapor molecules in air, which contributes to low surface adhesion and low friction. However, there is still a lack of direct experimental evidence whether basal planes of graphite excluding the negative effects of edges or dangling bonds shows intrinsic lubricity when sliding under ultrahigh vacuum (UHV) conditions. By the interlayer friction measurement enabled by graphite flake-wrapped atomic force microscope tips in UHV, we show a record-low friction coefficient of 4 × 10^-5 (slope of friction vs normal force curve) when sliding between graphite layers, which is much lower than that in ambient air. This discrepancy manifests the intrinsic sliding frictional behavior between the graphite basal planes when the tribo-materials and experimental conditions are well-designed and strictly controlled. In addition, the temperature dependence of the kinetic friction between the graphite layers has been investigated under UHV conditions over the temperature range of 125-448 K, which is consistent with the thermally activated process.

Hydrogen bonding sewing interface

Hydrogen bonding and van der Waals (vdW) forces have been precisely measured and distinguished by an in-house nanomechanical testing system.

A study on the effect of fingerprints in a wet system

In this paper, we study the influence of the fingerprint and sweat on the fingerprint on the friction between the hand and an object. When sweat contacts a finger or an object, it is sometimes easy to pick up the object. In particular, we can see this phenomenon when grasping a thin object such as paper and vinyl. The reason for this phenomenon is the increase of friction force, and this paper physically analyzes this natural phenomenon. To this end, we investigate the cause of the friction force between a solid and liquid to calculate the friction force when water is present within the fingerprint. To support the theoretical analysis, we conduct experiments to measure the friction force by making a finger-shaped silicon specimen. By comparing the theoretical and experimental results, we defined the change of friction force if there was water in the fingerprint. Through this study, it is possible to analyze the role of the fingerprint and sweat on the finger, and thereby explain the friction change depending on the amount of sweat.

Lateral Force Microscopy of Interfacial Nanobubbles: Friction Reduction and Novel Frictional Behavior

Atomic force microscopy is used to conduct single-asperity friction measurements at a water-graphite interface. Local mapping of the frictional force, which is based on the degree of the cantilever twisting, shows nearly friction-free when a tip scans over a nanobubble. Surprisingly, apart from being gapless, the associated friction loop exhibits a tilt in the cantilever twisting versus the tip's lateral displacement with the slope depending on the loading force. The sign of the slope reverses at around zero loading force. In addition, the measured normal and lateral tip-sample interactions exhibit unison versus tip-sample separation. Theoretical analysis, based on the balance of forces on the tip originated from the capillary force of the nanobubble and the torsion of the cantilever, offers quantitative explanations for both the tilted friction loop and the unison of force curves. The analysis may well apply in a wider context to the lateral force characterization on cap-shaped fluid structures such as liquid droplets on a solid substrate. This study further points to a new direction for friction reduction between solids in a liquid medium.

Influence of Oxygen Vacancies on the Frictional Properties of Nanocrystalline Zinc Oxide Thin Films in Ambient Conditions

Oxygen vacancy is the most studied point defect and has been found to significantly influence the physical properties of zinc oxide (ZnO). By using atomic force microscopy (AFM), we show that the frictional properties on the ZnO surface at the nanoscale greatly depend on the amount of oxygen vacancies present in the surface layer and the ambient humidity. The photocatalytic effect (PCE) is used to qualitatively control the amount of oxygen vacancies in the surface layer of ZnO and reversibly switch the surface wettability between hydrophobic and superhydrophilic states. Because oxygen vacancies in the ZnO surface can attract ambient water molecules, during the AFM friction measurement, water meniscus can form between the asperities at the AFM tip-ZnO contact due to the capillary condensation, leading to negative dependence of friction on the logarithm of tip sliding velocity. Such dependence is found to be a strong function of relative humidity and can be reversibly manipulated by the PCE. Our results indicate that it is possible to control the frictional properties of ZnO surface at the nanoscale using optical approaches.

Insight on Structure of Water and Ice Next to Graphene Using Surface-Sensitive Spectroscopy

The water/graphene interface has received considerable attention in the past decade due to its relevance in various potential applications including energy storage, sensing, desalination, and catalysis. Most of our knowledge about the interfacial water structure next to graphene stems from simulations, which use experimentally measured water contact angles (WCAs) on graphene (or graphite) to estimate the water-graphene interaction strength. However, the existence of a wide spectrum of reported WCAs on supported graphene and graphitic surfaces makes it difficult to interpret the water-graphene interactions. Here, we have used surface-sensitive infrared-visible sum frequency generation (SFG) spectroscopy to probe the interfacial water structure next to graphene supported on a sapphire substrate. In addition, the ice nucleation properties of graphene have been explored by performing in situ freezing experiments as graphitic surfaces are considered good ice nucleators. For graphene supported on sapphire, we observed a strong SFG peak associated with highly coordinated, ordered water next to graphene. Similar ordering was not detected next to bare sapphire, implying that the observed ordering of water molecules in the former case is a consequence of the presence of graphene. Our analysis indicates that graphene behaves like a hydrophobic (or negatively charged) surface, leading to enhanced ordering of water molecules. Although liquid water orders next to graphene, the ice formed is proton disordered. This research sheds light on water-graphene interactions relevant in optimizing the performance of graphene in various applications.

Colloidal crystals and water: Perspectives on liquid-solid nanoscale phenomena in wet particulate media

Solid colloidal ensembles inherently contain water adsorbed from the ambient moisture. This water, confined in the porous network formed by the building submicron spheres, greatly affects the ensemble properties. Inversely, one can benefit from such influence on collective features to explore the water behavior in such nanoconfinements. Recently, novel approaches have been developed to investigate in-depth where and how water is placed in the nanometric pores of self-assembled colloidal crystals. Here, we summarize these advances, along with new ones, that are linked to general interfacial water phenomena like adsorption, capillary forces, and flow. Water-dependent structural properties of the colloidal crystal give clues to the interplay between nanoconfined water and solid fine particles that determines the behavior of ensembles. We elaborate on how the knowledge gained on water in colloidal crystals provides new opportunities for multidisciplinary study of interfacial and nanoconfined liquids and their essential role in the physics of utmost important systems such as particulate media.

Water in Inhomogeneous Nanoconfinement: Coexistence of Multilayered Liquid and Transition to Ice Nanoribbons

Phase behavior and the associated phase transition of water within inhomogeneous nanoconfinement are investigated using molecular dynamics simulations. The nanoconfinement is constructed by a flat bottom plate and a convex top plate. At 300 K, the confined water can be viewed as a coexistence of monolayer, bilayer, and trilayer liquid domains to accommodate the inhomogeneous confinement. With increasing liquid density, the confined water with uneven layers transforms separately into two-dimensional ice crystals with unchanged layer number and rhombic in-plane symmetry for oxygen atoms. The monolayer water undergoes the transition first into a puckered ice nanoribbon, and the bilayer water transforms into a rhombic ice nanoribbon next, followed by the transition of trilayer water into a trilayer ice nanoribbon. The sequential localized liquid-to-solid transition within the inhomogeneous confinement can also be achieved by gradually decreasing the temperature at low liquid densities. These findings of phase behaviors of water under the inhomogeneous nanoconfinement not only extend the phase diagram of confined water but also have implications for realistic nanofluidic systems and microporous materials.

The Fluid Joint: The Soft Spot of Micro- and Nanosystems

Fluid bridges are ubiquitous soft structures of finite size that conform to and link the surfaces of neighboring objects. Fluid joints, the specific type of fluid bridge with at least one extremity constrained laterally, display even more pronounced reactivity and self-restoration, which make them remarkably suited for assembly, actuation, and manipulation purposes. Their peculiar surface and bulk properties place fluid joints at the rich intersection of diverse scientific interests, and foster their widespread use throughout micro- and nanotechnology. A critical survey of the mechanics and of the manifold applications of fluid bridges and joints in micro- and nanosystems is presented here, along with current challenges and multidisciplinary perspectives.

Light Effect on Water Viscosity: Implication for ATP Biosynthesis

Previous work assumed that ATP synthase, the smallest known rotary motor in nature, operates at 100% efficiency. Calculations which arrive to this result assume that the water viscosity inside mitochondria is constant and corresponds to that of bulk water. In our opinion this assumption is not satisfactory for two reasons: (1) There is evidence that the water in mitochondria prevails to 100% as interfacial water. (2) Laboratory experiments which explore the properties of interfacial water suggest viscosities which exceed those of bulk water, specifically at hydrophilic interfaces. Here, we wish to suggest a physicochemical mechanism which assumes intramitochondrial water viscosity gradients and consistently explains two cellular responses: The decrease and increase in ATP synthesis in response to reactive oxygen species and non-destructive levels of near-infrared (NIR) laser light, respectively. The mechanism is derived from the results of a new experimental method, which combines the technique of nanoindentation with the modulation of interfacial water layers by laser irradiation. Results, including the elucidation of the principle of light-induced ATP production, are expected to have broad implications in all fields of medicine.

Observation of nanoscale adhesion, friction and wear between ALD Al2O3 coated silicon MEMS sidewalls

We report a novel investigation of the tribological properties of aluminum oxide (Al2O3) when it is used as protective coating on the sidewalls of microelectromechanical systems (MEMS). By using an in-house built optical displacement measurement system, we were able to measure the on-chip displacements with an unprecedented resolution of 2 nm. This corresponds to 2 nN and 9 nN force resolution, respectively, depending on whether an adhesion or a friction sensor MEMS device was used for the measurement. Al2O3 was deposited on the vertical etched sidewalls using atomic layer deposition (ALD). All tests were carried out in ambient conditions. The same tests carried out on uncoated polysilicon devices were not reproducible due to stiction, which sometimes prevented the interacting surfaces from moving once contact was made. The higher adhesion of silicon was also found to hinder the mobility of the slider. In the ALD-coated devices, we observed increasing adhesion after 50000 repeated contacts. We attribute this increase to the accumulation of aluminum hydroxide debris produced by the reaction with moisture in the environment. We also investigated the long-term effect of friction on the coated silicon sidewalls. The dissipated energy decreases, with a minimum lateral force occurring around the 1000th cycle. After 1000 cycles, the lateral displacement decreases, suggesting an additional lateral dragging force caused by the interaction between a mixture of aluminum hydroxides and water. However, the small overall amount of debris produced during the friction test indicates the outstanding characteristic of Al2O3 as a protective coating for MEMS that use contacting or sliding interfaces.

Fluid flow and particle dynamics inside an evaporating droplet containing live bacteria displaying chemotaxis

Evaporation-induced particle deposition patterns like coffee rings provide easy visual identification that is beneficial for developing inexpensive and simple diagnostic devices for detecting pathogens. In this study, the effect of chemotaxis on such pattern formation has been realized experimentally in drying droplets of bacterial suspensions. We have investigated the velocity field, concentration profile, and deposition pattern in the evaporating droplet of Escherichia coli suspension in the presence and absence of nutrients. Flow visualization experiments using particle image velocimetry (PIV) were carried out with E. coli bacteria as biological tracer particles. Experiments were conducted for suspensions of motile (live) as well as nonmotile (dead) bacteria. In the absence of any nutrient gradient like sugar on the substrate, both types of bacterial suspension showed two symmetric convection cells and a ring like deposition of particles after complete evaporation. Interestingly, the droplet containing live bacterial suspension showed a different velocity field when the sugar was placed at the base of the droplet. This can be attributed to the chemoattractant nature of the sugar, which induced chemotaxis among live bacteria targeted toward the nutrient site. Deposition of the suspended bacteria was also displaced toward the nutrient site as the evaporation proceeded. Our experiments demonstrate that both velocity fields and concentration patterns can be altered by chemotaxis to modify the pattern formation in evaporating droplet containing live bacteria. These results highlight the role of bacterial chemotaxis in modifying coffee ring patterns.

Dynamic and static measurement of interfacial capillary forces by a hybrid nanomechanical system

The forces resulting from the presence of interfacial liquids have mechanical importance under ambient conditions. For holistic understanding of the liquid-mediated interactions, we combine the force-gradient sensitivity of an atomic force microscope (AFM) with the force measuring capability of a micro-electromechanical force sensor. Simultaneous measurement of the viscoelasticity of the water nanomeniscus and the absolute capillary force shows excellent agreement in its entire length, which justifies the validity of the widely used AFM results. We apply the hybrid system to measure the stress and strain, whose hysteretic response provides the intrinsic quantities of the liquid nanocluster.

Interaction and dynamics of ambient water adlayers on graphite probed using AFM voltage nanolithography and electrostatic force microscopy

In this work, we report the impact of the interaction and dynamics of increasing ambient water adlayers on etch patterns on a hydrophobic highly oriented pyrolytic graphite (HOPG) surface obtained using atomic force microscopy (AFM) voltage nanolithography in contact mode by applying a positive bias to the sample. The changes in the dimensions of the etch patterns were investigated as a function of the increasing number of water adlayers present on the HOPG, which is varied by changing the time interval since HOPG cleavage. Changes in the width of the etch patterns and the surrounding water droplets were monitored with time, using intermittent-contact-mode AFM. Electrostatic force microscopy (EFM) has been employed to study the charged nature of the etch patterns and the neighboring water film with time. The width of the etch patterns made on freshly cleaved HOPG shows an increase of ∼33% over 48 h, whereas nine-day-old cleaved HOPG shows a 79% increase over the same period. No changes in the dimensions are observed while imaging in a nitrogen atmosphere soon after lithography. In ambient conditions, the EFM phase shift of the patterns shows a large change of ∼84-88% over 30 h. This study demonstrates the effect of the stored electrostatic energy of a polarized ice-like water adlayer, resulting in changes in the dimensions of the etch patterns long after lithography, whereas liquid-like water droplets do not affect the etch patterns.

Nanoparticle dynamics in a nanodroplet

We describe the dynamics of 3-10 nm gold nanoparticles encapsulated by ∼30 nm liquid nanodroplets on a flat solid substrate and find that the diffusive motion of these nanoparticles is damped due to strong interactions with the substrate. Such damped dynamics enabled us to obtain time-resolved observations of encapsulated nanoparticles coalescing into larger particles. Techniques described here serve as a platform to study chemical and physical dynamics under highly confined conditions.

Between scylla and charybdis: hydrophobic graphene-guided water diffusion on hydrophilic substrates

The structure of water confined in nanometer-sized cavities is important because, at this scale, a large fraction of hydrogen bonds can be perturbed by interaction with the confining walls. Unusual fluidity properties can thus be expected in the narrow pores, leading to new phenomena like the enhanced fluidity reported in carbon nanotubes. Crystalline mica and amorphous silicon dioxide are hydrophilic substrates that strongly adsorb water. Graphene, on the other hand, interacts weakly with water. This presents the question as to what determines the structure and diffusivity of water when intercalated between hydrophilic substrates and hydrophobic graphene. Using atomic force microscopy, we have found that while the hydrophilic substrates determine the structure of water near its surface, graphene guides its diffusion, favouring growth of intercalated water domains along the C-C bond zigzag direction. Molecular dynamics and density functional calculations are provided to help understand the highly anisotropic water stripe patterns observed.

Observation of Universal Solidification in the Elongated Water Nanomeniscus

The ubiquitous capillary water bridge in nature plays an important role in interfacial phenomena under ambient conditions such as adhesion and friction. We present experimental measurements of the mechanical properties of the nanometric water column by using noncontact atomic force microscopy. We observe the universal behaviors that the relaxation time (RT) associated with the meniscus increases with its elongation and ruptures at the same value of RT, independent of the meniscus volume. In particular, the enhancement of RT between formation and rupture of the meniscus is indicative of the increased solid-like response, similar to that observed in nanoconfined water layers. Our results that the longer water column is more solid-like and less stable suggest (i) water at the vapor/liquid interface is more solid-like than that inside the meniscus and (ii) the associated smaller mobility of the interfacial water molecules is responsible for the structural stability of the water meniscus.

Direct observation of self-assembled chain-like water structures in a nanoscopic water meniscus

Sawtooth-like oscillatory forces generated by water molecules confined between two oxidized silicon surfaces were observed using a cantilever-based optical interfacial force microscope when the two surfaces approached each other in ambient environments. The humidity-dependent oscillatory amplitude and periodicity were 3-12 nN and 3-4 water diameters, respectively. Half of each period was matched with a freely jointed chain model, possibly suggesting that the confined water behaved like a bundle of water chains. The analysis also indicated that water molecules self-assembled to form chain-like structures in a nanoscopic meniscus between two hydrophilic surfaces in air. From the friction force data measured simultaneously, the viscosity of the chain-like water was estimated to be between 10(8) and 10(10) times greater than that of bulk water. The suggested chain-like structure resolves many unexplained properties of confined water at the nanometer scale, thus dramatically improving the understanding of a variety of water systems in nature.

Adhesion of alumina surfaces through confined water layers containing various molecules

When two surfaces confine water layers between them at the nanoscale, the behavior of these confined water molecules can deviate significantly from the behavior of bulk water, and it could reflect on the adhesion of such surfaces. Thus, the aim of this study is to assess the role of confined water layers on the adhesion of hydrophilic surfaces and how sensitive this adhesion is to the presence of contaminants. Our methodology used under water AFM force measurements with an alumina-sputtered sphere-tipped cantilever and a flat alumina single crystal and then added fractions of ethanol, dimethylformamide, formamide, trimethylamine, and trehalose to water as contaminants. Such solutions were designed to illuminate the influences of dielectric constant, molecular size, refractive index, and number of hydrogen bonds from donors and acceptors of solutes to water. Apart from very dilute solutions of dimethylformamide, all solutions decreased the ability of confined water to give adhesion of the alumina surfaces. The predicted theoretical contribution of van der Waals and electrostatic forces was not observed when the contaminants distorted the way water organizes itself in confinement. The conclusion was that adhesion was sensitive mostly to the hydrogen-bonding network within water layers confined by the hydrophilic alumina surfaces.

Friction and adhesion forces of Bacillus thuringiensis spores on planar surfaces in atmospheric systems

The kinetic friction force and the adhesion force of Bacillus thuringiensis spores on planar surfaces in atmospheric systems were studied using atomic force microscopy. The influence of relative humidity (RH) on these forces varied for different surface properties including hydrophobicity, roughness, and surface charge. The friction force of the spore was greater on a rougher surface than on mica, which is atomically flat. As RH increases, the friction force of the spores decreases on mica whereas it increases on rough surfaces. The influence of RH on the interaction forces between hydrophobic surfaces is not as strong as for hydrophilic surfaces. The friction force of the spore is linear to the sum of the adhesion force and normal load on the hydrophobic surface. The poorly defined surface structure of the spore and the adsorption of contaminants from the surrounding atmosphere are believed to cause a discrepancy between the calculated and measured adhesion forces.

Adhesion hysteresis from interdependent capillary and electrostatic forces

Adhesion hysteresis commonly occurs at the nanoscale in humid atmospheres, yet mechanisms are not entirely understood. Here, the adhesion forces between silicon (111) oxide surfaces and tungsten oxide probes have been examined using interfacial force microscopy. The results show that the adhesion forces during surface approach and separation differ not only in magnitude but also in mechanism, arising mainly from capillary and electrostatic forces, respectively. Surface contact leads to a transient intersurface potential on dewetting. This mechanism of adhesion hysteresis differs in not relying singly on hysteretic wetting. Furthermore, by biasing the surfaces, nonadditivity is demonstrated between the capillary and electrostatic forces at the onset of condensation. These results hold important implications on the interpretation of force in nanoprobe geometries in humid atmospheres.

Angled long tip to tuning fork probes for atomic force microscopy in various environments

We expand the range of applications of a tuning fork probe (TFP) in frequency-modulation atomic force microscopy (FM-AFM) by attaching a long metal tip at a certain angle. By the combined flexure of the metal tip and the tuning fork prong, this TFP can change the direction of the detectable force by switching the resonance frequency, which has not been realized with conventional TFPs with short tips. The oscillatory behavior of the tip apex of the TFP is predicted by computer simulations and is experimentally confirmed with scanning electron microscope. FM-AFM operations using this TFP are performed in various environments, i.e., in ultrahigh vacuum, air, and water. FM-AFM images obtained at an atomic step of highly oriented pyrolytic graphite in air show a clear difference depending on the excitation frequency. It is also revealed that the higher order flexural modes of this TFP are advantageous for FM-AFM in water due to the reduction in the degree of hydrodynamic damping.

Cutting ice: nanowire regelation

Even below its normal melting temperature, ice melts when subjected to high pressure and refreezes once the pressure is lifted. A classic demonstration of this regelation phenomenon is the passing of a thin wire through a block of ice when sufficient force is exerted. Here we present a molecular-dynamics study of a nanowire cutting through ice to unravel the molecular level mechanisms responsible for regelation. In particular, we show that the transition from a stationary to a moving wire due to increased driving force changes from symmetric and continuous to asymmetric and discontinuous as a hydrophilic wire is replaced by a hydrophobic one. This is explained at the molecular level in terms of the wetting properties of the wire.

A study on the behavior of water droplet confined between an atomic force microscope tip and rough surfaces

The atomic force microscope (AFM) is used for imaging, measuring, and manipulating matter at the nanoscale. It is well-known that water condenses between an AFM tip and a solid surface, thereby generating a pull-off force acting on the tip. We investigated the behavior of a water meniscus between the tip and a solid surface using molecular dynamics simulation. We considered ideally smooth surfaces and rough surfaces that are regularly structured and randomly generated with a standard deviation of 2 A. The characteristic energy values of the solid surfaces used in the study are 0.1, 0.5, 1.0, 1.5, 2.0, and 2.5 kcal/mol, and the tip-to-surface distance considered is in the range from 1.5 to 3.7 nm. The behavior of water confined between the tip and a solid surface depends on the characteristic energy of the solid surface, the tip-to-surface distance, and the shape of the solid surface. The contact angle, neck radius of the water meniscus, and absolute value of capillary force decreases as the tip-to-surface distance increases, regardless of the pattern of the solid surface. Compared to an ideally smooth surface, the effect of regularly structured roughness on the behavior of a water meniscus on a solid surface is significant, whereas the effect of randomly generated roughness is relatively small.

Mechanical probing of icelike water monolayers

Direct measurements of the normal force interactions between a mica-tungsten contact pair at various humidity levels reveal the presence of repulsive forces at about 0.5 nm before intimate contact. Such repulsive interactions begin to appear above 20% RH and are fully developed in the range of 38-45% RH. Using the DMT model of contact, a reduced elastic modulus of approximately 6.7 GPa is extracted from these repulsive interactions and attributed to the presence of icelike water on mica at room temperature. The collapse of such structures was also inferred from the measurements.

Relevance of quantum mechanics on some aspects of ion channel function

Mathematical modeling of ionic diffusion along K ion channels indicates that such diffusion is oscillatory, at the weak non-Markovian limit. This finding leads us to derive a Schrödinger-Langevin equation for this kind of system within the framework of stochastic quantization. The Planck's constant is shown to be relevant to the Lagrangian action at the level of a single ion channel. This sheds new light on the issue of applicability of quantum formalism to ion channel dynamics and to the physical constraints of the selectivity filter.

Atomic force microscopy characterization of the chemical contrast of nanoscale patterns fabricated by electron beam lithography on polyethylene glycol oxide thin films

The present paper shows that atomic force microscopy (AFM) imaging of friction force and phase lag in ambient air can be used to characterize the chemical contrast induced by electron beam (EB) irradiation on polyethylene glycol oxide (PEO) surface. Time-of-flight secondary emission mass spectroscopy measurements showed that the EB irradiation generates chemical contrast on PEO surface by decreasing the ether bond density. The AFM measurements showed smaller phase lag and lower friction and adhesive forces on the EB irradiated PEO surface, as compared to the non-irradiated PEO surface. While the chemical contrast in friction force had a linear dependence on the EB irradiation dose, the dependence of the chemical contrast in the phase lag was strongly non-linear. As the friction and adhesive forces depended on the AFM probe hydrophilicity and air humidity, the contrast in friction and adhesive forces is ascribed to different capillary condensation of ambient water vapour at the AFM tip contact with the EB irradiated and non-irradiated PEO surfaces, respectively.

Non-Markovian noise mediated through anomalous diffusion within ion channels

It is evident from a wide range of experimental findings that ion channel gating is inherently stochastic. The issue of "memory effects" (diffusional retardation due to local changes in water viscosity) in ionic flow has been recently addressed using Brownian dynamics simulations. The results presented indicate such memory effects are negligible, unless the diffusional barrier is much higher than that of free solute. In this paper using differential stochastic methods we conclude that the Markovian property of exponential dwell times gives rise to a high barrier, resulting in diffusional memory effects that cannot be ignored in determining ionic flow through channels. We have addressed this question using a generalized Langevin equation that contains a combination of Markovian and non-Markovian processes with different time scales. This approach afforded the development of an algorithm that describes an oscillatory ionic diffusional sequence. The resulting oscillatory function behavior, with exponential decay, was obtained at the weak non-Markovian limit with two distinct time scales corresponding to the processes of ionic diffusion and drift. This will be analyzed further in future studies using molecular dynamics simulations. We propose that the rise of time scales and memory effects is related to differences of shear viscosity in the cytoplasm and extracellular matrix.

Magnetic friction in Ising spin systems

A new contribution to friction is predicted to occur in systems with magnetic correlations: Tangential relative motion of two Ising spin systems pumps energy into the magnetic degrees of freedom. This leads to a friction force proportional to the area of contact. The velocity and temperature dependence of this force are investigated. Magnetic friction is strongest near the critical temperature, below which the spin systems order spontaneously. Antiferromagnetic coupling leads to stronger friction than ferromagnetic coupling with the same exchange constant. The basic dissipation mechanism is explained. A surprising effect is observed in the ferromagnetically ordered phase: The relative motion can act like a heat pump cooling the spins in the vicinity of the friction surface.