Induction of strong immune response against a multicomponent antigen ofMycobacterium tuberculosisin BALB/c mice using PLGA and DOTAP adjuvant

Solvent free production of liposomes as a vaccine adjuvant with a comparative study of different cationic surfactants

Liposomes are well known vaccine adjuvants, that could associate with different subunit antigens by several mechanisms to enhance their immunogenicity. However, the adjuvant effect of liposomes differs with varying their physicochemical properties, necessitating the optimisation of formulation parameters to achieve the desired adjuvant effect and immune response. Initial studies focused on optimizing the production of DSPC and cholesterol liposomes using the solvent-free powder hydration method, followed by size reduction via sonication. A 3 × 4 × 9 factorial design, comprising 108 different trials in triplicates, was set to study the influence of key factors involved in the preparation process, including the homogenizer speed, stirring time, and sonication time. The desired size and PDI were achieved by setting the optimized process factors. The model antigen, OVA was loaded into the optimised liposomes which were then purified through an optimized dialysis process. Additional formulation factors were adjusted to maximize loading efficiency, including the concentration of the cationic surfactant, antigen concentration, liposome-to-antigen volume ratio, and the application of lyophilization. Since cationic liposomes are known to be the most immunogenic, a comparative study was conducted using different cationic surfactants, DODAB, HTAB, DTAC, and DHDAB, across various surfactant-to-lipid ratios. The resulting cationic liposomes were evaluated for their physicochemical properties, loading efficiency, drug release profiles, kinetic models, and stability.

Intradermal versus subcutaneous immunization: Effects of administration route using a lipid-PLGA hybrid nanoparticle tuberculosis vaccine

Tuberculosis (TB) remains a significant global health challenge, latently affecting around a quarter of the global population. The sole licensed TB vaccine, Mycobacterium bovis Bacillus Calmette-Guérin (BCG), shows variable efficacy, particularly among adolescents and adults, underscoring the pressing need for more effective vaccination strategies. The administration route is crucial for vaccine efficacy, and administration via the skin, being rich in immune cells, may offer advantages over conventional subcutaneous routes, which lack direct access to abundant antigen-presenting cells. This study compared the immunogenic effects of intradermal versus subcutaneous administration of a candidate TB vaccine delivering a Ag85B-ESAT6-Rv2034 (AER) multiphase fusion recombinant protein, in lipid-poly(D,L-lactic-co-glycolic acid) (lipid-PLGA) nanoparticles in mice. In-depth evaluation of immune responses in splenocytes was performed using 27-marker spectral flow cytometry. Both routes elicited significant T-cell responses. However, intradermal administration uniquely increased polyfunctional CD4+ and CD8+ T-cells producing IL-2, IFNγ, and TNFα, associated with protection against TB. Additionally, it significantly increased CD69+ B-cell counts and induced higher AER-specific antibody titers, particularly IgG2a. These results underscore the superior immunogenic potential of intradermal vaccine administration by effectively inducing immune cells associated with TB protection, highlighting its significance in the development of new vaccine strategies.

Evaluation of PLGA, lipid-PLGA hybrid nanoparticles, and cationic pH-sensitive liposomes as tuberculosis vaccine delivery systems in a Mycobacterium tuberculosis challenge mouse model - A comparison

Tuberculosis (TB) continues to pose a global threat for millennia, currently affecting over 2 billion people and causing 10.6 million new cases and 1.3 million deaths annually. The only existing vaccine, Mycobacterium Bovis Bacillus Calmette-Guérin (BCG), provides highly variable and inadequate protection in adults and adolescents. This study explores newly developed subunit tuberculosis vaccines that use a multistage protein fusion antigen Ag85b-ESAT6-Rv2034 (AER). The protection efficacy, as well as in vivo induced immune responses, were compared for five vaccines: BCG; AER-CpG/MPLA mix; poly(D,L-lactic-co-glycolic acid) (PLGA); lipid-PLGA hybrid nanoparticles (NPs); and cationic pH-sensitive liposomes (the latter three delivering AER together with CpG and MPLA). All vaccines, except the AER-adjuvant mix, induced protection in Mycobacterium tuberculosis (Mtb)-challenged C57/Bl6 mice as indicated by a significant reduction in bacterial burden in lungs and spleens of the animals. Four AER-based vaccines significantly increased the number of circulating multifunctional CD4+ and CD8+ T-cells producing IL-2, IFNγ, and TNFα, exhibiting a central memory phenotype. Furthermore, AER-based vaccines induced an increase in CD69+ B-cell counts as well as high antigen-specific antibody titers. Unexpectedly, none of the observed immune responses were associated with the bacterial burden outcome, such that the mechanism responsible for the observed vaccine-induced protection of these vaccines remains unclear. These findings suggest the existence of non-classical protective mechanisms for Mtb infection, which could, once identified, provide interesting targets for novel vaccines.

Advancements in Nanoparticle-Based Adjuvants for Enhanced Tuberculosis Vaccination: A Review

Tuberculosis (TB) remains a leading cause of morbidity and mortality worldwide, necessitating the development of more effective vaccines. Nanoparticle-based adjuvants represent a promising approach to enhancing tuberculosis vaccine efficacy. This review focuses on the advantages of nanoparticulate-loaded vaccines, emphasizing their ability to improve antigen delivery, safety, and immunogenicity. We discuss the various types of nanoparticles and their unique physicochemical properties that contribute to improved antigen delivery and sustained immune activation. Additionally, we highlight the advantages of nanoparticle-based adjuvants in inducing strong cellular and humoral immunity, enhancing vaccine stability, and reducing adverse effects. Finally, we address current challenges and future perspectives in the application of these novel adjuvants, emphasizing their potential to transform TB vaccine strategies and ultimately contribute to better global health outcomes.

Research progress on the structure, derivatives, pharmacological activity, and drug carrier capacity of Chinese yam polysaccharides: A review

Chinese yam is a traditional Chinese medicine that has a long history of medicinal and edible usage in China and is widely utilised in food, medicine, animal husbandry, and other industries. Chinese yam polysaccharides (CYPs) are among the main active components of Chinese yam. In recent decades, CYPs have received considerable attention because of their remarkable biological activities, such as immunomodulatory, antitumour, hypoglycaemic, hypolipidaemic, antioxidative, anti-inflammatory, and bacteriostatic effects. The structure and chemical alterations of polysaccharides are the main factors affecting their biological activities. CYPs are potential drug carriers owing to their excellent biodegradability and biocompatibility. There is a considerable amount of research on CYPs; however, a systematic summary is lacking. This review summarises the structural characteristics, derivative synthesis, biological activities, and their usage as drug carriers, providing a basis for future research, development, and application of CYPs.

The Use of Particulate Systems for Tuberculosis Prophylaxis and Treatment: Opportunities and Challenges

The use of particles to develop vaccines and treatments for a wide variety of diseases has increased, and their success has been demonstrated in preclinical investigations. Accurately targeting cells and minimizing doses and adverse side effects, while inducing an adequate biological response, are important advantages that particulate systems offer. The most used particulate systems are liposomes and their derivatives, immunostimulatory complexes, virus-like particles, and organic or inorganic nano- and microparticles. Most of these systems have been proven using therapeutic or prophylactic approaches to control tuberculosis, one of the most important infectious diseases worldwide. This article reviews the progress and current state of the use of particles for the administration of TB vaccines and treatments in vitro and in vivo, with a special emphasis on polymeric particles. In addition, we discuss the challenges and benefits of using these particulate systems to provide researchers with an overview of the most promising strategies in current preclinical trials, offering a perspective on their progress to clinical trials.

CFP10-loaded PLGA nanoparticles as a booster vaccine confer protective immunity against Mycobacterium bovis

Introduction: The limited efficacy of BCG (bacillus Calmette-Guérin) urgently requires new effective vaccination approaches for the control of tuberculosis. Poly lactic-co-glycolic acid (PLGA) is a prevalent drug delivery system. However, the effect of PLGA-based nanoparticles (NPs) against tuberculosis for the induction of mucosal immune response is no fully elucidated. In this study, we hypothesized that intranasal immunization with culture filtrate protein-10 (CFP10)-loaded PLGA NPs (CFP10-NPs) could boost the protective immunity of BCG against Mycobacterium bovis in mice. Methods: The recombinant protein CFP10 was encapsulated with PLGA NPs to prepare CFP10-NPs by the classical water-oil-water solvent-evaporation method. Then, the immunoregulatory effects of CFP10-NPs on macrophages in vitro and on BCG-immunized mice in vivo were investigated. Results: We used spherical CFP10-NPs with a negatively charged surface (zeta-potential -28.5 ± 1.7 mV) having a particle size of 281.7 ± 28.5 nm in diameter. Notably, CFP10-NPs significantly enhanced the secretion of tumor necrosis factor α (TNF-α) and interleukin (IL)-1β in J774A.1 macrophages. Moreover, mucosal immunization with CFP10-NPs significantly increased TNF-α and IL-1β production in serum, and immunoglobulin A (IgA) secretion in bronchoalveolar lavage fluid (BALF), and promoted the secretion of CFP10-specific interferon-γ (IFN-γ) in splenocytes of mice. Furthermore, CFP10-NPs immunization significantly reduced the inflammatory area and bacterial load in lung tissues at 3-week post-M. bovis challenge. Conclusion: CFP10-NPs markedly improve the immunogenicity and protective efficacy of BCG. Our findings explore the potential of the airway mucosal vaccine based on PLGA NPs as a vehicle for targeted lung delivery.

Fabrication and characterization of Chinese yam polysaccharides PLGA nanoparticles stabilized Pickering emulsion as an efficient adjuvant

The Chinese yam polysaccharides PLGA nanoparticles were applied as stabilizers in this study to prepare O/W Pickering emulsion. The optimized preparation conditions were PLGA concentration of 5 mg/mL, ultrasonic power of 50 %, and ultrasonic time of 2 min. The CYP-PPAS emulsion exhibits a raspberry-like morphology with a large number of nanoparticles surrounding the oil droplets. The CYP-PPAS emulsion exhibited outstanding stability at 4 °C and 37 °C for 28 days with high antigen loading efficiency and provided a controlled and sustained release of Chinese yam polysaccharides and OVA antigen in vitro. CYP-PPAS/OVA elicited robust antigen-specific immune response and induced a mixed Th1/Th2 immune response after immunization. Furthermore, CYP-PPAS/OVA caused a high CD4+/CD8+ ratio leading in increased activation of splenic T lymphocytes subpopulations. Moreover, CYP-PPAS is a safe vaccination adjuvant with high safety profile in vivo. Thus, the novel designed Pickering emulsion CYP-PPAS was a safe and effective adjuvant for inducing the strong and long-term immune response.

An Overview of Nanocarrier-Based Adjuvants for Vaccine Delivery

The development of vaccines is one of the most significant medical accomplishments which has helped to eradicate a large number of diseases. It has undergone an evolutionary process from live attenuated pathogen vaccine to killed whole organisms or inactivated toxins (toxoids), each of them having its own advantages and disadvantages. The crucial parameters in vaccination are the generation of memory response and protection against infection, while an important aspect is the effective delivery of antigen in an intelligent manner to evoke a robust immune response. In this regard, nanotechnology is greatly contributing to developing efficient vaccine adjuvants and delivery systems. These can protect the encapsulated antigen from the host’s in-vivo environment and releasing it in a sustained manner to induce a long-lasting immunostimulatory effect. In view of this, the present review article summarizes nanoscale-based adjuvants and delivery vehicles such as viral vectors, virus-like particles and virosomes; non-viral vectors namely nanoemulsions, lipid nanocarriers, biodegradable and non-degradable nanoparticles, calcium phosphate nanoparticles, colloidally stable nanoparticles, proteosomes; and pattern recognition receptors covering c-type lectin receptors and toll-like receptors.

Therapeutic lipid-coated hybrid nanoparticles against bacterial infections

One of the most important health concerns in society is the development of pathogen-causing nosocomial infections. Since the first discovery of antibiotics, bacterial infections have been highly treatable. However, with evolution and the nondiscretionary usage of antibiotics, pathogens have also found new ways to survive the onslaught of antibiotics by surviving intracellularly or through the formation of obstinate biofilms, and through these, the outcomes of regular antibiotic treatments may now be unsatisfactory. Lipid-coated hybrid nanoparticles (LCHNPs) are the next-generation core–shell structured nanodelivery system, where an inorganic or organic core, loaded with antimicrobials, is enveloped by lipid layers. This core–shell structure, with multifarious decorations, not only improves the loading capabilities of therapeutics but also has the potential to improve therapeutic delivery, especially for targeting biofilm-based and intracellular bacterial infections. Although there has been significant interest in the development of LCHNPs, they have yet to be widely exploited for bacterial infections. In this review, we will provide an overview on the latest development of LCHNPs and the various approaches in synthesizing this nano-delivery system. In addition, a discussion on future perspectives of LCHNPs, in combination with other novel anti-bacterial technologies, will be provided towards the end of this review.

Lipid-coated hybrid nanoparticles are next-generation core–shell structured nanodelivery systems, which improve the loading capabilities of therapeutics and can improve therapeutic delivery, especially for targeting biofilm-based and intracellular bacterial infections.

Cell cytotoxicity, immunostimulatory and antitumor effects of lipid content of liposomal delivery platforms in cancer immunotherapies. A comprehensive in-vivo and in-vitro study

Liposome is one of the promising technologies for antigen delivery in cancer immunotherapies. It seems that the phospholipid content of liposomes can act as immunostimulatory molecules in cancer immunotherapy. In the present study, the immunological properties of different phospholipid content of liposomal antigen delivery platforms were investigated. To this aim, F1 to F4 naïve liposomes (without tumor-specific loaded antigens) of positively charged DOTAP/Cholesterol/DOPE (4/4/4 mol ratio), negatively charged DMPC/DMPG/Cholesterol/DOPE (15/2/3/5), negatively charged DSPC/DSPG/Cholesterol/DOPE (15/2/3/5) and PEGylated HSPC/mPEG2000-DSPE/Cholesterol (13/110) liposomal compositions were administered in mice bearing C26 colon carcinoma to assess tumor therapy. Moreover, In-vitro studies were conducted, including cytotoxicity assay, serum cytokines measurements, IFN-γ and IL-4 ELISpot assay, T cells subpopulation frequencies assay. The liposomes containing DOTAP and DOPE (F1 liposomes) were able to stimulate cytotoxic T lymphocytes signals such as IFN-γ secretions. In parallel, the aforementioned phospholipids stimulated secretion of IL-4 and IL-17 cytokines from T helper cells. However, these liposomes did not improve survival indices in mice. As conclusion, DOTAP and DOPE contained liposomes (F1 liposomes) stimulate a mixture of Th1 and Th2 immune responses in a tumor-specific antigens-free manner in mice bearing C26 colon carcinoma. Therefore, phospholipid composition of liposomes merits consideration in designing antigen-containing liposomes for cancer immunotherapy.

Raw starch microparticles as BCG adjuvant: Their efficacy depends on the virulence of the infection strains

The persistence of tuberculosis (TB) as one of the top 10 causes of death worldwide, the growing incidence of multidrug-resistant tuberculosis and the controversial efficacy of the Bacille Calmette-Guérin (BCG) vaccine drives the development of new generation multistage vaccines against this disease that can boost BCG-primed immunity. The use of polymeric microparticles for this purpose increases due to their advantages, especially their good safety levels and intrinsic immunostimulant properties. We recently explored and demonstrated the reinforcing and adjuvant potential of starch microparticles (SMPs) that administered intranasally to BCG-primed BALB/c mice, alone or in combination with a recombinant antigen, increased survival rates and induced a reduction of bacterial load in the lungs of mice infected with tuberculosis. Here, we tested the effect of SMPs added to the BCG vaccine as adjuvant to the whole-cell vaccine and investigated their contribution to the improvement of the protective efficacy of subcutaneous vaccination in mice challenged with virulent strains of Mycobacterium tuberculosis. As expected, our results were dependent on the infection strains, showing that virulence is a crucial factor that affects the adjuvant activity of SMPs. Our results also confirm the adjuvant activity of this carbohydrate and its usefulness in diverse vaccination strategies not only for mucosal but also for parenteral administration.

Tuberculosis vaccine candidates based on mycobacterial cell envelope components

Even after decades searching for a new and more effective vaccine against tuberculosis, the scientific community is still pursuing this goal due to the complexity of its causative agent, Mycobacterium tuberculosis (Mtb). Mtb is a microorganism with a robust variety of survival mechanisms that allow it to remain in the host for years. The structure and nature of the Mtb envelope play a leading role in its resistance and survival. Mtb has a perfect machinery that allows it to modulate the immune response in its favor and to adapt to the host's environmental conditions in order to remain alive until the moment to reactivate its normal growing state. Mtb cell envelope protein, carbohydrate and lipid components have been the subject of interest for developing new vaccines because most of them are responsible for the pathogenicity and virulence of the bacteria. Many indirect evidences, mainly derived from the use of monoclonal antibodies, support the potential protective role of Mtb envelope components. Subunit and DNA vaccines, lipid extracts, liposomes and membrane vesicle formulations are some examples of technologies used, with encouraging results, to evaluate the potential of these antigens in the protective response against Mtb.