Chemical kinetics of multiphase reactions between ozone and human skin lipids: Implications for indoor air quality and health effects

Molecular Dynamics Simulations of the Interactions of Organic Compounds at Indoor Relevant Surfaces

With markedly different reaction conditions compared to the chemistry of the outside atmosphere, indoor air chemistry poses new challenges to the scientific community that require combined experimental and computational efforts. Here, we review molecular dynamics simulations that have contributed to the mechanistic understanding of the complex dynamics of organic compounds at indoor surfaces and their interplay with experiments and indoor air models. We highlight the rich interactions between volatile organic compounds and silica and titanium dioxide surfaces, serving as proxies for glasses and paints, as well as the dynamics of skin oil lipids and their oxidation products, which sensitively affect the quality of indoor air in crowded environments. As the studies we review here are pioneering in the rapidly emerging field of indoor chemistry, we provide suggestions for increasing the potentially important role that molecular simulations can continue to play.

Insights into Dermal Permeation of Skin Oil Oxidation Products from Enhanced Sampling Molecular Dynamics Simulation

The oxidation of human sebum, a lipid mixture covering our skin, generates a range of volatile and semivolatile carbonyl compounds that contribute largely to indoor air pollution in crowded environments. Kinetic models have been developed to gain a deeper understanding of this complex multiphase chemistry, but they rely partially on rough estimates of kinetic and thermodynamic parameters, especially those describing skin permeation. Here, we employ atomistic molecular dynamics simulations to study the translocation of selected skin oil oxidation products through a model stratum corneum membrane. We find these simulations to be nontrivial, requiring extensive sampling with up to microsecond simulation times, in spite of employing enhanced sampling techniques. We identify the high degree of order and stochastic, long-lived temporal asymmetries in the membrane structure as the leading causes for the slow convergence of the free energy computations. We demonstrate that statistical errors due to insufficient sampling are substantial and propagate to membrane permeabilities. These errors are independent of the enhanced sampling technique employed and very likely independent of the precise membrane model.

Kinetic multilayer models for surface chemistry in indoor environments

Multiphase interactions and chemical reactions at indoor surfaces are of particular importance due to their impact on air quality in indoor environments with high surface to volume ratios. Kinetic multilayer models are a powerful tool to simulate various gas-surface interactions including partitioning, diffusion and multiphase chemistry of indoor compounds by treating mass transport and chemical reactions in a number of model layers in the gas and condensed phases with a flux-based approach. We have developed a series of kinetic multilayer models that have been applied to describe multiphase chemistry and interactions indoors. They include the K2-SURF model treating the reversible adsorption of volatile organic compounds on surfaces, the KM-BL model treating diffusion through an indoor surface boundary layer, the KM-FILM model treating organic film formation by multi-layer adsorption and film growth by absorption of indoor compounds, and the KM-SUB-Skin-Clothing model treating reactions of ozone with skin lipids in skin and clothing. We also developed the effective mass accommodation coefficient that can treat surface partitioning by effectively taking into account kinetic limitations of bulk diffusion. In this study we provide detailed instructions and code annotations of these models for the model user. Example sensitivity simulations that investigate the impact of input parameters are presented to help with familiarization to the codes. The user can adapt the codes as required to model experimental and indoor field campaign measurements, can use the codes to gain insights into important reactions and processes, and can extrapolate to new conditions that may not be accessible by measurements.

A model of the spatiotemporal distribution of ozone-squalene reaction and ozonolysis by-products from human body

Emissions of ozone and its by-products from ozonolysis on human surfaces lead to indoor air pollution. However, the spatiotemporal distribution of such emissions in indoor environments remains unclear, which may introduce bias when assessing human exposure to ozone and ozonolysis byproducts. This study developed a computational fluid dynamics model to describe the physical and chemical processes involved in the emission of ozone-dependent volatile organic compounds from the human body. The results showed that the reaction probability of ozone in the human body depends on the ozone concentration in the bulk air. For ozone concentrations ranging from 28 ppb to 200 ppb, the reaction probabilities ranged from 5.9 × 10-5 to 1.5 × 10-4. The concentrations of ozone and ozonolysis byproducts obtained from the experimental measurements were used for model validation. The ozonolysis by-products were found to be uniformly distributed in the chamber, whereas the ozone distribution showed less uniformity. The ozone concentration near the human surface was approximately 30 %∼50 % of that in the ambient air. Overall, a model was developed to understand the effect of ozone-surface interactions on indoor air quality. This model can be applied to analyze human exposure to ozone and ozonolysis byproducts and for health risk assessment in built environments.

Ozone Loss on Painted Surfaces: Dependence on Relative Humidity, Aging, and Exposure to Reactive SVOCs

Ozone and its oxidation products result in negative health effects when inhaled. Despite painted surfaces being the most abundant surface in indoor spaces, surface loss remains one of the largest uncertainties in the indoor ozone budget. Here, ozone uptake coefficients (γO3) on painted surfaces were measured in a flow-through reactor where 79% of the inner surfaces were removable painted glass sheets. Flat white paint initially had a high uptake coefficient (8.3 × 10-6) at 20% RH which plateaued to 1.1 × 10-6 as the paint aged in an indoor office over weeks. Increasing the RH from 0 to 75% increased γO3 by a factor of 3.0, and exposure to 134 ppb of α-terpineol for 1 h increased γO3 by a factor of 1.6 at 20% RH. RH also increases α-terpineol partitioning to paint, further increasing ozone loss, but the type of paint (flat, eggshell, satin, semigloss) had no significant effect. A kinetic multilayer model captures the dependence of γO3 on RH and the presence of α-terpineol, indicating the reacto-diffusive depth for O3 is 1 to 2 μm. Given the similarity of the kinetics on aged surfaces across many paint types and the sustained reactivity during aging, these results suggest a mechanism for catalytic loss.

The chemical assessment of surfaces and air (CASA) study: using chemical and physical perturbations in a test house to investigate indoor processes

The Chemical Assessment of Surfaces and Air (CASA) study aimed to understand how chemicals transform in the indoor environment using perturbations (e.g., cooking, cleaning) or additions of indoor and outdoor pollutants in a well-controlled test house. Chemical additions ranged from individual compounds (e.g., gaseous ammonia or ozone) to more complex mixtures (e.g., a wildfire smoke proxy and a commercial pesticide). Physical perturbations included varying temperature, ventilation rates, and relative humidity. The objectives for CASA included understanding (i) how outdoor air pollution impacts indoor air chemistry, (ii) how wildfire smoke transports and transforms indoors, (iii) how gases and particles interact with building surfaces, and (iv) how indoor environmental conditions impact indoor chemistry. Further, the combined measurements under unperturbed and experimental conditions enable investigation of mitigation strategies following outdoor and indoor air pollution events. A comprehensive suite of instruments measured different chemical components in the gas, particle, and surface phases throughout the study. We provide an overview of the test house, instrumentation, experimental design, and initial observations - including the role of humidity in controlling the air concentrations of many semi-volatile organic compounds, the potential for ozone to generate indoor nitrogen pentoxide (N2O5), the differences in microbial composition between the test house and other occupied buildings, and the complexity of deposited particles and gases on different indoor surfaces.

Ozone Chemistry on Greasy Glass Surfaces Affects the Levels of Volatile Organic Compounds in Indoor Environments

The chemistry of ozone (O3) on indoor surfaces leads to secondary pollution, aggravating the air quality in indoor environments. Here, we assess the heterogeneous chemistry of gaseous O3 with glass plates after being 1 month in two different kitchens where Chinese and Western styles of cooking were applied, respectively. The uptake coefficients of O3 on the authentic glass plates were measured in the dark and under UV light irradiation typical for indoor environments (320 nm < λ < 400 nm) at different relative humidities. The gas-phase product compounds formed upon reactions of O3 with the glass plates were evaluated in real time by a proton-transfer-reaction quadrupole-interface time-of-flight mass spectrometer. We observed typical aldehydes formed by the O3 reactions with the unsaturated fatty acid constituents of cooking oils. The formation of decanal, 6-methyl-5-hepten-2-one (6-MHO), and 4-oxopentanal (4-OPA) was also observed. The employed dynamic mass balance model shows that the estimated mixing ratios of hexanal, octanal, nonanal, decanal, undecanal, 6-MHO, and 4-OPA due to O3 chemistry with authentic grime-coated kitchen glass surfaces are higher in the kitchen where Chinese food was cooked compared to that where Western food was cooked. These results show that O3 chemistry on greasy glass surfaces leads to enhanced VOC levels in indoor environments.

Squalene Depletion in Skin Following Human Exposure to Ozone under Controlled Chamber Conditions

A major component of human skin oil is squalene, a highly unsaturated hydrocarbon that protects the skin from atmospheric oxidants. Skin oil, and thus squalene, is continuously replenished on the skin surface. Squalene is also quickly consumed through reactions with ozone and other oxidants. This study examined the extent of squalene depletion in the skin oils of the forearm of human volunteers after exposure to ozone in a climate chamber. Temperature, relative humidity (RH), skin coverage by clothing, and participants' age were varied in a controlled manner. Concentrations of squalene were determined in skin wipe samples collected before and after ozone exposure. Exposures to ozone resulted in statistically significant decreases in post-exposure squalene concentrations compared to pre-exposure squalene concentrations in the skin wipes when squalene concentrations were normalized by concentrations of co-occurring cholesterol but not by co-occurring pyroglutamic acid (PGA). The rate of squalene loss due to ozonolysis was lower than its replenishment on the skin surface. Within the ranges examined, temperature and RH did not significantly affect the difference between normalized squalene levels in post-samples versus pre-samples. Although not statistically significant, skin coverage and age of the volunteers (three young adults, three seniors, and three teenagers) did appear to impact squalene depletion on the skin surfaces.

Machine learning approach for estimating the human-related VOC emissions in a university classroom

Indoor air quality becomes increasingly important, partly because the COVID-19 pandemic increases the time people spend indoors. Research into the prediction of indoor volatile organic compounds (VOCs) is traditionally confined to building materials and furniture. Relatively little research focuses on estimation of human-related VOCs, which have been shown to contribute significantly to indoor air quality, especially in densely-occupied environments. This study applies a machine learning approach to accurately estimate the human-related VOC emissions in a university classroom. The time-resolved concentrations of two typical human-related (ozone-related) VOCs in the classroom over a five-day period were analyzed, i.e., 6-methyl-5-hepten-2-one (6-MHO), 4-oxopentanal (4-OPA). By comparing the results for 6-MHO concentration predicted via five machine learning approaches including the random forest regression (RFR), adaptive boosting (Adaboost), gradient boosting regression tree (GBRT), extreme gradient boosting (XGboost), and least squares support vector machine (LSSVM), we find that the LSSVM approach achieves the best performance, by using multi-feature parameters (number of occupants, ozone concentration, temperature, relative humidity) as the input. The LSSVM approach is then used to predict the 4-OPA concentration, with mean absolute percentage error (MAPE) less than 5%, indicating high accuracy. By combining the LSSVM with a kernel density estimation (KDE) method, we further establish an interval prediction model, which can provide uncertainty information and viable option for decision-makers. The machine learning approach in this study can easily incorporate the impact of various factors on VOC emission behaviors, making it especially suitable for concentration prediction and exposure assessment in realistic indoor settings.

Removal of gaseous volatile organic compounds via vacuum ultraviolet photodegradation: Review and prospect

Volatile organic compounds (VOCs) have attracted much attention for decades as they are the precursors of photochemical smog and are harmful to the environment and human health. Vacuum ultraviolet (VUV) photodegradation is a simple and effective method to decompose VOCs (ranging from tens to hundreds of ppmV) without additional oxidants or catalysts in the air at atmospheric pressure. In this paper, we review the research progress of VOCs removal via VUV photodegradation. The fundamentals are outlined and the key operation factors for VOCs degradation, such as humidity, oxygen content, VOCs initial concentration, light intensity, and flow rate, are discussed. VUV photodegradation of VOCs mixture is elucidated. The application of VUV photodegradation in combination with ozone-assisted catalytic oxidation (OZCO) and photocatalytic oxidation (PCO) systems, and as the pre-treatment technique for biological purification are illustrated. Based on the summary, we propose the challenges of VUV photodegradation and perspectives for its future development.

A model to evaluate ozone distribution and reaction byproducts in aircraft cabin environments

Ozone and byproducts of ozone-initiated reactions are among the primary pollutants in aircraft cabins. However, investigations of the spatial distribution and reaction mechanisms of these pollutants are insufficient. This study established a computational fluid dynamics-based model to evaluate ozone and byproduct distribution, considering ozone reactions in air, adsorption onto surfaces, and byproduct desorption from surfaces. The model was implemented in an authentic single-aisle aircraft cabin and validated by measurements recorded during the aircraft cruise phase. Ozone concentrations in the supply air-dominated area were approximately 50% higher than that in the passenger breathing zone, suggesting that human surfaces represent a significant ozone sink. The deposition velocity onto human bodies was 21.83 m/h, surpassing 3.97 m/h on other cabin interior surface areas. Our model provides a mechanistic tool to analyze ozone and byproduct concentration distributions, which would be useful for assessing passenger health risks and for developing strategies for healthier aircraft cabin environments.

The influence of personal care products on ozone-skin surface chemistry

Personal care products are increasingly being marketed to protect skin from the potentially harmful effects of air pollution. Here, we experimentally measure ozone deposition rates to skin and the generation rates and yields of oxidized products from bare skin and skin coated with various lotion formulations. Lotions reduced the ozone flux to the skin surface by 12% to 25%; this may be due to dilution of reactive skin lipids with inert lotion compounds or by reducing ozone diffusivity within the resulting mixture. The yields of volatile squalene oxidation products were 25% to 70% lower for a commercial sunscreen and for a base lotion with an added polymer or with antioxidants. Lower yields are likely due to competitive reactions of ozone with lotion ingredients including some ingredients that are not intended to be ozone sinks. The dynamics of the emissions of squalene ozonation product 6 methyl-2-heptenone (6MHO) suggest that lotions can dramatically reduce the solubility of products in the skin film. While some lotions appear to reduce the rate of oxidation of squalene by ozone, this evidence does not yet demonstrate that the lotions reduce the impact of air pollution on skin health.

The human oxidation field

Hydroxyl (OH) radicals are highly reactive species that can oxidize most pollutant gases. In this study, high concentrations of OH radicals were found when people were exposed to ozone in a climate-controlled chamber. OH concentrations calculated by two methods using measurements of total OH reactivity, speciated alkenes, and oxidation products were consistent with those obtained from a chemically explicit model. Key to establishing this human-induced oxidation field is 6-methyl-5-hepten-2-one (6-MHO), which forms when ozone reacts with the skin-oil squalene and subsequently generates OH efficiently through gas-phase reaction with ozone. A dynamic model was used to show the spatial extent of the human-generated OH oxidation field and its dependency on ozone influx through ventilation. This finding has implications for the oxidation, lifetime, and perception of chemicals indoors and, ultimately, human health.

Reactions and Products of Squalene and Ozone: A Review

This critical review describes the squalene-ozone (SqOz) reaction, or squalene ozonolysis. Ambient ozone penetrates indoors and drives indoor air chemistry. Squalene, a component of human skin oil, contains six carbon-carbon double bonds and is very reactive with ozone. Bioeffluents from people contribute to indoor air chemistry and affect the indoor air quality, resulting in exposures because people spend the majority of their time indoors. The SqOz reaction proceeds through various formation pathways and produces compounds that include aldehydes, ketones, carboxylic acids, and dicarbonyl species, which have a range of volatilities. In this critical review of SqOz chemistry, information on the mechanism of reaction, reaction probability, rate constants, and reaction kinetics are compiled. Characterizations of SqOz reaction products have been done in laboratory experiments and real-world settings. The effect of multiple environmental parameters (ozone concentration, air exchange rate (AER), temperature, and relative humidity (RH)) in indoor settings are summarized. This critical review concludes by identifying the paucity of available exposure, health, and toxicological data for known reaction products. Key knowledge gaps about SqOz reactions leading to indoor exposures and adverse health outcomes are provided as well as an outlook on where the field is headed.

Multiphase Ozonolysis of Oleic Acid-Based Lipids: Quantitation of Major Products and Kinetic Multilayer Modeling

Commonly found in atmospheric aerosols, cooking oils, and human sebum, unsaturated lipids rapidly decay upon exposure to ozone, following the Criegee mechanism. Here, the gas-surface ozonolysis of three oleic acid-based compounds was studied in a reactor and indoors. Under dry conditions, quantitative product analyses by ¹H NMR indicate up to 79% molar yield of stable secondary ozonides (SOZs) in oxidized triolein and methyl oleate coatings. Elevated relative humidity (RH) significantly suppresses the SOZ yields, enhancing the formation of condensed-phase aldehydes and volatile C9 products. Along with kinetic parameters informed by molecular dynamics simulations, these results were used as constraints in a kinetic multilayer model (KM-GAP) simulating triolein ozonolysis. Covering a wide range of coating thicknesses and ozone levels, the model predicts a much faster decay near the gas-lipid interface compared to the bulk. Although the dependence of RH on SOZ yields is well predicted, the model overestimates the production of H₂O₂ and aldehydes. With negligible dependence on RH, the product composition for oxidized oleic acid is substantially affected by a competitive reaction between Criegee intermediates (CIs) and carboxylic acids. The resulting α-acyloxyalkyl hydroperoxides (α-AAHPs) have much higher molar yields (29-38%) than SOZs (12-16%). Overall, the ozone-lipid chemistry could affect the indoor environment through "crust" accumulation on surfaces and volatile organic compound (VOC) emission. In the atmosphere, the peroxide formation and changes in particle hygroscopicity may have effects on climate. The related health impacts are also discussed.

Characterization of the off-body squalene ozonolysis on indoor surfaces

Chemical reaction and physical transport characteristics of indoor surfaces play an important role in indoor air quality. This study presents a kinetic model to describe the reaction of ozone with squalene on indoor surfaces in a family house, by incorporating external and internal mass transfer, surface partitioning, and chemical reaction on indoor surfaces. Field experiments were performed in the family house. The first 3-days of data, collected when the house was unoccupied, are used to derive the key parameters in the model, which are then used for predicting the concentrations in other unoccupied days. Comparison of squalene oxidation products during the occupied and unoccupied periods shows that even if the house is unoccupied for several days, the indoor concentrations of 6-methyl-5-hepten-2-one (6-MHO) and 4-oxopentanal (4-OPA) remain substantial, demonstrating that surface reaction of ozone with off-body squalene can significantly impact the composition of indoor air. Model predictions of the three compounds (ozone, 6-MHO, and 4-OPA) agree well with the experimental observations for all test days. Furthermore, we make the first attempt to estimate the duration of typical polyunsaturated aldehydes (TOP, TOT, and TTT), which indicated that these compounds, as well as off-body squalene, can persist on indoor surfaces for a relatively long period in the examined residence.

Influence of Mechanical Ventilation Systems and Human Occupancy on Time-Resolved Source Rates of Volatile Skin Oil Ozonolysis Products in a LEED-Certified Office Building

Building mechanical ventilation systems are a major driver of indoor air chemistry as their design and operation influences indoor ozone (O₃) concentrations, the dilution and transport of indoor-generated volatile organic compounds (VOCs), and indoor environmental conditions. Real-time VOC and O₃ measurements were integrated with a building sensing platform to evaluate the influence of mechanical ventilation modes and human occupancy on the dynamics of skin oil ozonolysis products (SOOPs) in an office in a LEED-certified building during the winter. The ventilation system operated under variable recirculation ratios (RRs) from RR = 0 (100% outdoor air) to RR = 1 (100% recirculation air). Time-resolved source rates for 6-methyl-5-hepten-2-one (6-MHO), 4-oxopentanal (4-OPA), and decanal were highly dynamic and changed throughout the day with RR and occupancy. Total SOOP source rates during high-occupancy periods (10:00-18:00) varied from 2500-3000 μg h^-1 when RR = 0.1 to 6300-6700 μg h^-1 when RR = 1. Source rates for gas-phase reactions, outdoor air, and occupant-associated emissions generally decreased with increasing RR. The recirculation air source rate increased with RR and typically became the dominant source for RR > 0.5. SOOP emissions from surface reservoirs were also a prominent source, contributing 10-50% to total source rates. Elevated per person SOOP emission factors were observed, potentially due to multiple layers of soiled clothing worn during winter.

Investigation on air quality of specific indoor environments-spa salons located in Gdynia, Poland

Due to excessive application of essential oils and scented products in spa salons during aromatherapy and massage sessions, the elevated concentration of total volatile organic compounds (TVOCs), particularly terpenes, which are known as secondary organic aerosol (SOA) precursors, is expected there. This study was aimed at determination of VOCs with a particular regard to terpenes in air samples collected in selected spa salons located in Northern Poland. Active air sampling was conducted before and after treatments. Samples were analyzed with the use of thermal desorption gas chromatography coupled with flame-ionization detector (TD-GC-FID) and mass spectrometer (TD-GC-MS). Obtained results allowed to characterize chemical composition of indoor air of spa salons and also to relate the dependence between applied essential oil and indoor air chemical composition. It has been proved that (i) spa salons are characterized by TVOC concentrations exceeding recommended values of 300-400 μg m-3 in most of examined cases, reaching up to several thousand of micrograms per cubic meter, (ii) TVOC concentration is strictly related to salon characteristics and carried out treatments, (iii) terpenes constitute a significant part of TVOCs present in spa indoor air, from 22 up to 86%, (iv) most commonly investigated terpenes in the literature (D-limonene, α-pinene, camphene, and linalool) were also determined at the highest concentration levels in this study and (v) VOC chemical composition is strictly dependent on the type of applied essential oils. On the basis of obtained results, it may be stated that extensive application of essential oils rich in terpenes can significantly alter indoor air chemistry of spa salons, thereby influencing health and well-being of employees working there. Graphical abstract.

Effect of Ozone, Clothing, Temperature, and Humidity on the Total OH Reactivity Emitted from Humans

People influence indoor air chemistry through their chemical emissions via breath and skin. Previous studies showed that direct measurement of total OH reactivity of human emissions matched that calculated from parallel measurements of volatile organic compounds (VOCs) from breath, skin, and the whole body. In this study, we determined, with direct measurements from two independent groups of four adult volunteers, the effect of indoor temperature and humidity, clothing coverage (amount of exposed skin), and indoor ozone concentration on the total OH reactivity of gaseous human emissions. The results show that the measured concentrations of VOCs and ammonia adequately account for the measured total OH reactivity. The total OH reactivity of human emissions was primarily affected by ozone reactions with organic skin-oil constituents and increased with exposed skin surface, higher temperature, and higher humidity. Humans emitted a comparable total mixing ratio of VOCs and ammonia at elevated temperature-low humidity and elevated temperature-high humidity, with relatively low diversity in chemical classes. In contrast, the total OH reactivity increased with higher temperature and higher humidity, with a larger diversity in chemical classes compared to the total mixing ratio. Ozone present, carbonyl compounds were the dominant reactive compounds in all of the reported conditions.

Physical-Chemical Coupling Model for Characterizing the Reaction of Ozone with Squalene in Realistic Indoor Environments

Squalene can react with indoor ozone to generate a series of volatile and semi-volatile organic compounds, some of which may be skin or respiratory irritants, causing adverse health effects. Better understanding of the ozone/squalene reaction and product transport characteristics is thus important. In this study, we developed a physical-chemical coupling model to describe the behavior of ozone/squalene reaction products, that is, 6-methyl-5-hepten-2-one (6-MHO) and 4-oxopentanal (4-OPA) in the gas phase and skin, by considering the chemical reaction and physical transport processes (external convection, internal diffusion, and surface uptake). Experiments without intervention were performed in a single-family house in California utilizing time- and space-resolved measurements. The key parameters in the model were extracted from 5 day data and then used to predict the behaviors in some other days. Predictions from the present model can reproduce the concentration profiles of the three compounds (ozone, 6-MHO, and 4-OPA) well (R² = 0.82-0.89), indicating high accuracy of the model. Exposure analysis shows that the total amount of 6-MHO and 4-OPA entering the blood capillaries in 4 days can reach 14.6 and 30.1 μg, respectively. The contribution of different sinks to ozone removal in the tested realistic indoor environment was also analyzed.

Yields and Variability of Ozone Reaction Products from Human Skin

The skin of 20 human participants was exposed to ∼110 ppb O₃ and volatile products of the resulting chemistry were quantified in real time. Yields (ppb product emitted/ppb ozone consumed) for 40 products were quantified. Major products of the primary reaction of ozone-squalene included 6-methyl 5-hepten-2-one (6-MHO) and geranyl acetone (GA) with average yields of 0.22 and 0.16, respectively. Other major products included decanal, methacrolein (or methyl vinyl ketone), nonanal, and butanal. Yields varied widely among participants; summed yields ranged from 0.33 to 0.93. The dynamic increase in emission rates during ozone exposure also varied among participants, possibly indicative of differences in the thickness of the skin lipid layer. Factor analysis indicates that much of the variability among participants is due to factors associated with the relative abundance of (1) "fresh" skin lipid constituents (such as squalene and fatty acids), (2) oxidized skin lipids, and (3) exogenous compounds. This last factor appears to be associated with the presence of oleic and linoleic acids and could be accounted for by uptake of cooking oils or personal care products to skin lipids.

Assessing Human Exposure to SVOCs in Materials, Products, and Articles: A Modular Mechanistic Framework

A critical review of the current state of knowledge of chemical emissions from indoor sources, partitioning among indoor compartments, and the ensuing indoor exposure leads to a proposal for a modular mechanistic framework for predicting human exposure to semivolatile organic compounds (SVOCs). Mechanistically consistent source emission categories include solid, soft, frequent contact, applied, sprayed, and high temperature sources. Environmental compartments are the gas phase, airborne particles, settled dust, indoor surfaces, and clothing. Identified research needs are the development of dynamic emission models for several of the source emission categories and of estimation strategies for critical model parameters. The modular structure of the framework facilitates subsequent inclusion of new knowledge, other chemical classes of indoor pollutants, and additional mechanistic processes relevant to human exposure indoors. The framework may serve as the foundation for developing an open-source community model to better support collaborative research and improve access for application by stakeholders. Combining exposure estimates derived using this framework with toxicity data for different end points and toxicokinetic mechanisms will accelerate chemical risk prioritization, advance effective chemical management decisions, and protect public health.

Atopic dermatitis severity during exposure to air pollutants and weather changes with an Artificial Neural Network (ANN) analysis

BACKGROUND

Epidemiological studies have shown an association between global warming, air pollution, and allergic diseases. Several air pollutants, including volatile organic compounds, formaldehyde, toluene, nitrogen dioxide (NO₂ ), and particulate matter, act as risk factors for the development or aggravation of atopic dermatitis (AD). We evaluated the impact of air pollutants and weather changes on AD patients.

MATERIALS AND METHODS

Sixty AD patients ≥5 years of age (mean age: 23.5 ± 12.5 years), living in the Campania Region (Southern Italy), were followed for 18 months. The primary outcome was the effect of atmospheric and climatic factors on signs and symptoms of AD, assessed using the SCORAD (SCORing Atopic Dermatitis) index. We measured mean daily temperature (TOD), outdoor relative humidity (RH), diurnal temperature range (DTR), precipitation, particulate with aerodynamic diameter ≤ 10 μm (PM₁₀ ), NO₂ , tropospheric ozone (O₃ ), and total pollen count (TPC). A multivariate logistic regression analysis was used to examine the associations of AD signs and symptoms with these factors. An artificial neural network (ANN) analysis investigated the relationships between weather changes, environmental pollutants, and AD severity.

RESULTS

The severity of AD symptoms was positively correlated with outdoor temperatures (TOD, DTR), RH, precipitation, PM₁₀ , NO₂ , O₃ , and TPC. The ANN analysis also showed a good discrimination performance (75.46%) in predicting disease severity based on environmental pollution data, but weather-related factors were less predictive.

CONCLUSION

The results of the present study provide evidence that weather changes and air pollutions have a significant impact on skin reactivity and symptoms in AD patients, increasing the severity of the dermatitis. The knowledge of the single variables proportion on AD severity symptoms is important to propose alerts for exacerbations in patients with AD of each age. This finding represents a good starting point for further future research in an area of increasingly growing interest.

Spatial distributions of ozonolysis products from human surfaces in ventilated rooms

Ozone has adverse effects on human health. Skin oil on the human surface acts as an ozone sink indoors, producing oxidation products that can cause skin and respiratory irritations. Concentrations of ozone and oxidation products near human surfaces, including the breathing zone, can be modulated by indoor ventilation modes and human surface conditions. The objective of this study is to examine concentrations and spatial heterogeneity of ozone and ozonolysis products under representative ranges of indoor ventilation, clothing, and breathing conditions. Using computational fluid dynamics (CFD) simulation in conjunction with a chemical kinetic model, details of ozone reactions with the human surface and subsequent chemical reactions are examined. The results show that primary ozonolysis products are concentrated near the soiled clothing, while the secondary products are relatively well distributed throughout the room. Increasing indoor air mixing enhances the ozone deposition to the human surface, thereby resulting in higher emission rates of oxidation products in the room. Soiled clothing consumes more ozone than clean clothing and accordingly produces ~ 65% more primary products and ~15% more secondary products. The results also reveal that unsaturated hydrocarbons from the human breath, such as isoprene, contribute to only ~0.5% of ozone removal compared to ozone deposition to the human surface.

The Indoor Chemical Human Emissions and Reactivity (ICHEAR) project: Overview of experimental methodology and preliminary results

With the gradual reduction of emissions from building products, emissions from human occupants become more dominant indoors. The impact of human emissions on indoor air quality is inadequately understood. The aim of the Indoor Chemical Human Emissions and Reactivity (ICHEAR) project was to examine the impact on indoor air chemistry of whole-body, exhaled, and dermally emitted human bioeffluents under different conditions comprising human factors (t-shirts/shorts vs long-sleeve shirts/pants; age: teenagers, young adults, and seniors) and a variety of environmental factors (moderate vs high air temperature; low vs high relative humidity; presence vs absence of ozone). A series of human subject experiments were performed in a well-controlled stainless steel climate chamber. State-of-the-art measurement technologies were used to quantify the volatile organic compounds emitted by humans and their total OH reactivity; ammonia, nanoparticle, fluorescent biological aerosol particle (FBAP), and microbial emissions; and skin surface chemistry. This paper presents the design of the project, its methodologies, and preliminary results, comparing identical measurements performed with five groups, each composed of 4 volunteers (2 males and 2 females). The volunteers wore identical laundered new clothes and were asked to use the same set of fragrance-free personal care products. They occupied the ozone-free (<2 ppb) chamber for 3 hours (morning) and then left for a 10-min lunch break. Ozone (target concentration in occupied chamber ~35 ppb) was introduced 10 minutes after the volunteers returned to the chamber, and the measurements continued for another 2.5 hours. Under a given ozone condition, relatively small differences were observed in the steady-state concentrations of geranyl acetone, 6MHO, and 4OPA between the five groups. Larger variability was observed for acetone and isoprene. The absence or presence of ozone significantly influenced the steady-state concentrations of acetone, geranyl acetone, 6MHO, and 4OPA. Results of replicate experiments demonstrate the robustness of the experiments. Higher repeatability was achieved for dermally emitted compounds and their reaction products than for constituents of exhaled breath.

Rapid data-driven model reduction of nonlinear dynamical systems including chemical reaction networks using ℓ1-regularization

Large-scale nonlinear dynamical systems, such as models of atmospheric hydrodynamics, chemical reaction networks, and electronic circuits, often involve thousands or more interacting components. In order to identify key components in the complex dynamical system as well as to accelerate simulations, model reduction is often desirable. In this work, we develop a new data-driven method utilizing ℓ¹-regularization for model reduction of nonlinear dynamical systems, which involves minimal parameterization and has polynomial-time complexity, allowing it to easily handle large-scale systems with as many as thousands of components in a matter of minutes. A primary objective of our model reduction method is interpretability, that is to identify key components of the dynamical system that contribute to behaviors of interest, rather than just finding an efficient projection of the dynamical system onto lower dimensions. Our method produces a family of reduced models that exhibit a trade-off between model complexity and estimation error. We find empirically that our method chooses reduced models with good extrapolation properties, an important consideration in practical applications. The reduction and extrapolation performance of our method are illustrated by applications to the Lorenz model and chemical reaction rate equations, where performance is found to be competitive with or better than state-of-the-art approaches.

Breathing-rate adjusted population exposure to ozone and its oxidation products in 333 cities in China

While PM2.5 (particles with aerodynamic diameter less than 2.5 µm) concentrations in China are beginning to decline because of pollution abatement measures, ozone (O3) concentrations continue to rise. In this study, we have used a Monte Carlo approach to estimate breathing-rate adjusted (BRA) population exposure to ozone and its oxidation products based on hourly O3 measurements collected in 2017 from monitoring stations in 333 Chinese cities. The median measured outdoor O3 concentration in these cities was 31 ppb, while the median calculated indoor concentrations of ozone and ozone-derived oxidation products were 7.5 ppb and 21 ppb, respectively. The median BRA O3 exposure concentration was 12 ppb, ranging from 2.2 ppb to 18 ppb among the cities. Eastern and central cities had higher exposure concentrations, while northeastern and western cities had lower. On average, the residents of these cities spent 88% of their time indoors. Consequently, even with breathing rate adjustments, indoor O3 exposure averaged 50% of the total O3 exposure nationwide. The median BRA exposure concentration for ozone-derived products was 18 ppb, ranging from 4.5 ppb to 32 ppb among the cities. On average, BRA exposure concentrations were 1.6 times larger for oxidation products than for ozone, while seasonal variations of exposure concentrations were smaller for oxidation products than for ozone. As many of the products of indoor ozone chemistry are toxic, the health consequences of exposure to such products should be further investigated.

Mitochondrial Sirtuins in Skin and Skin Cancers

Mammalian sirtuins (SIRTs 1-7) are a family of NAD+-dependent deacetylases with distinct subcellular localization and biological functions that regulate various important cellular processes. Among these, SIRTs -3, -4 and -5 are located in the mitochondria and have been implicated in caloric restriction, oxidative stress, aging and various human diseases. Emerging evidence has found dysregulation of mitochondrial sirtuins in multiple dermatological conditions, including responses to ultraviolet radiation (UVR), suggesting their importance in maintaining skin health. In this review, we discuss the roles and implications of mitochondrial sirtuins in cutaneous cellular processes, and their emerging potential as a target for the management of skin diseases, including skin cancer. Among mitochondrial sirtuins, SIRT3 is the most studied and linked to multiple skin conditions and diseases (keratinocyte differentiation, wound healing, chronological aging, UVR and ozone response, systemic sclerosis, melanoma, basal cell carcinoma (BCC) and squamous cell carcinoma (SCC)). SIRT4 has been connected to keratinocyte differentiation, chronological aging, UVR response, alopecia, BCC and SCC. Further, SIRT5 has been associated with keratinocyte differentiation, melanoma, BCC and SCC. Overall, while there is compelling evidence for the involvement of mitochondrial sirtuins in skin, additional detailed studies are needed to understand their exact roles in skin and skin cancers.

The atmospheric chemistry of indoor environments

Through air inhalation, dust ingestion and dermal exposure, the indoor environment plays an important role in controlling human chemical exposure. Indoor emissions and chemistry can also have direct impacts on the quality of outdoor air. And so, it is important to have a strong fundamental knowledge of the chemical processes that occur in indoor environments. This review article summarizes our understanding of the indoor chemistry field. Using a molecular perspective, it addresses primarily the new advances that have occurred in the past decade or so and upon developments in our understanding of multiphase partitioning and reactions. A primary goal of the article is to contrast indoor chemistry to that which occurs outdoors, which we know to be a strongly gas-phase, oxidant-driven system in which substantial oxidative aging of gases and aerosol particles occurs. By contrast, indoor environments are dark, gas-phase oxidant concentrations are relatively low, and due to air exchange, only short times are available for reactive processing of gaseous and particle constituents. However, important gas-surface partitioning and reactive multiphase chemistry occur in the large surface reservoirs that prevail in all indoor environments. These interactions not only play a crucial role in controlling the composition of indoor surfaces but also the surrounding gases and aerosol particles, thus affecting human chemical exposure. There are rich research opportunities available if the advanced measurement and modeling tools of the outdoor atmospheric chemistry community continue to be brought indoors.

Heterogeneous Ozonolysis of Squalene: Gas-Phase Products Depend on Water Vapor Concentration

Previous work examining the condensed-phase products of squalene particle ozonolysis found that an increase in water vapor concentration led to lower concentrations of secondary ozonides, increased concentrations of carbonyls, and smaller particle diameter, suggesting that water changes the fate of the Criegee intermediate. To determine if this volume loss corresponds to an increase in gas-phase products, we measured gas-phase volatile organic compound (VOC) concentrations via proton-transfer-reaction time-of-flight mass spectrometry. Studies were conducted in a flow-tube reactor at atmospherically relevant ozone (O₃) exposure levels (5-30 ppb h) with pure squalene particles. An increase in water vapor concentration led to strong enhancement of gas-phase oxidation products at all tested O₃ exposures. An increase in water vapor from near zero to 70% relative humidity (RH) at high O₃ exposure increased the total mass concentration of gas-phase VOCs by a factor of 3. The observed fraction of carbon in the gas-phase correlates with the fraction of particle volume lost. Experiments involving O₃ oxidation of shirts soiled with skin oil confirms that the RH dependence of gas-phase reaction product generation occurs similarly on surfaces containing skin oil under realistic conditions. Similar behavior is expected for O₃ reactions with other surface-bound organics containing unsaturated carbon bonds.

Kinetics and Condensed-Phase Products in Multiphase Ozonolysis of an Unsaturated Triglyceride

Ozone is an important oxidant in the environment. To study the nature of multiphase ozonolysis, an unsaturated triglyceride, triolein, of the type present in skin oil, biological membranes, and most cooking oils was oxidized by gas-phase ozone on a surface. A high-performance liquid chromatography/electrospray ionization mass spectrometry (HPLC-ESI-MS) method was developed for analyzing triolein and its oxidized products. Upon exposure to ozone, the decay of thin coatings of triolein was observed, accompanied by the formation of functionalized condensed-phase products including secondary ozonides (SOZ), acids, and aldehydes. By studying the reaction kinetics as a function of average coating thickness and ozone mixing ratio, we determined that the reactive uptake coefficient (γ) is on the order of 10^-6 to 10^-5. It is also concluded that the reaction occurs in the bulk without a major interfacial component, and the reacto-diffusive depth of ozone in the triolein coating is estimated to be between 8 and 40 nm. The specific nature of the reaction products is affected by the reactions of the Criegee intermediate formed during ozonolysis. In particular, although an increase in the relative humidity to 50% from dry conditions has no effect on the kinetics of triolein decay, the yield of SOZs is significantly depressed, indicating reactions of the Criegee intermediates to form hydroperoxides. Once formed, the SOZ products are thermally stable over periods of at least 48 h at room temperature but decomposition was observed under simulated outdoor sunlight, likely forming organic acids. From an environmental perspective, this chemistry indicates that SOZs and other oxygenates will form via ozonolysis of oily indoor surfaces and skin oil.

Indoor boundary layer chemistry modeling

Ozone (O₃ ) chemistry is thought to dominate the oxidation of indoor surfaces. We consider the hypothesis that reactions taking place within indoor boundary layers result in greater than anticipated hydroxyl radical (OH) deposition rates. We develop models that account for boundary layer mass-transfer phenomena, O₃ -terpene chemistry and OH formation, removal, and deposition; we solve these analytically and by applying numerical methods. For an O₃ -limonene system, we find that OH flux to a surface with an O₃ reaction probability of 10^-8 is 4.3 × 10^-5 molec/(cm² s) which is about 10 times greater than predicted by a traditional boundary layer theory. At very low air exchange rates the OH surface flux can be as much as 10% of that for O₃ . This effect becomes less pronounced for more O₃ -reactive surfaces. Turbulence intensity does not strongly influence the OH concentration gradient except for surfaces with an O₃ reaction probability >10^-4 . Although the O₃ flux dominates OH flux under most conditions, OH flux can be responsible for as much as 10% of total oxidant uptake to otherwise low-reactivity surfaces. Further, OH chemistry differs from that for ozone; therefore, its deposition is important in understanding the chemical evolution of some indoor surfaces and surface films.

Indoor ozone/human chemistry and ventilation strategies

This study aimed to better understand and quantify the influence of ventilation strategies on occupant-related indoor air chemistry. The oxidation of human skin oil constituents was studied in a continuously ventilated climate chamber at two air exchange rates (1 h^-1 and 3 h^-1 ) and two initial ozone mixing ratios (30 and 60 ppb). Additional measurements were performed to investigate the effect of intermittent ventilation ("off" followed by "on"). Soiled t-shirts were used to simulate the presence of occupants. A time-of-flight-chemical ionization mass spectrometer (ToF-CIMS) in positive mode using protonated water clusters was used to measure the oxygenated reaction products geranyl acetone, 6-methyl-5-hepten-2-one (6-MHO) and 4-oxopentanal (4-OPA). The measurement data were used in a series of mass balance models accounting for formation and removal processes. Reactions of ozone with squalene occurring on the surface of the t-shirts are mass transport limited; ventilation rate has only a small effect on this surface chemistry. Ozone-squalene reactions on the t-shirts produced gas-phase geranyl acetone, which was subsequently removed almost equally by ventilation and further reaction with ozone. About 70% of gas-phase 6-MHO was produced in surface reactions on the t-shirts, the remainder in secondary gas-phase reactions of ozone with geranyl acetone. 6-MHO was primarily removed by ventilation, while further reaction with ozone was responsible for about a third of its removal. 4-OPA was formed primarily on the surfaces of the shirts (~60%); gas-phase reactions of ozone with geranyl acetone and 6-MHO accounted for ~30% and ~10%, respectively. 4-OPA was removed entirely by ventilation. The results from the intermittent ventilation scenarios showed delayed formation of the reaction products and lower product concentrations compared to continuous ventilation.

Modelling consortium for chemistry of indoor environments (MOCCIE): integrating chemical processes from molecular to room scales

We report on the development of a modelling consortium for chemistry in indoor environments that connects models over a range of spatial and temporal scales, from molecular to room scales and from sub-nanosecond to days, respectively. Our modeling approaches include molecular dynamics (MD) simulations, kinetic process modeling, gas-phase chemistry modeling, organic aerosol modeling, and computational fluid dynamics (CFD) simulations. These models are applied to investigate ozone reactions with skin and clothing, oxidation of volatile organic compounds and formation of secondary organic aerosols, and mass transport and partitioning of indoor species to surfaces. MD simulations provide molecular pictures of limonene adsorption on SiO2 and ozone interactions with the skin lipid squalene, providing kinetic parameters such as surface accommodation coefficient, desorption lifetime, and bulk diffusivity. These parameters then constrain kinetic process models, which resolve mass transport and chemical reactions in gas and condensed phases for analysis of experimental data. A detailed indoor chemical box model is applied to simulate α-pinene ozonolysis with improved representation of gas-particle partitioning. Application of 2D-volatility basis set reveals that OH-induced aging sometimes drives increases in indoor organic aerosol concentrations, due to organic mass functionalization and enhanced partitioning. CFD simulations show that concentrations of ozone and primary product change near the human surface rapidly, indicating non-uniform spatial distributions from the occupant surface to ambient air, while secondary ozone product is relatively well-mixed throughout the room. This development establishes a framework to integrate different modeling tools and experimental measurements, opening up an avenue for development of comprehensive and integrated models with representations of various chemistry in indoor environments.

Modeling the Time-Dependent Concentrations of Primary and Secondary Reaction Products of Ozone with Squalene in a University Classroom

Volatile organic chemicals are produced from reactions of ozone with squalene in human skin oil. Both primary and secondary reaction products, i.e., 6-methyl-5-hepten-2-one (6-MHO) and 4-oxopentanal (4-OPA), have been reported in indoor occupied spaces. However, the abundance of these products indoors is a function of many variables, including the amount of ozone and occupants present as well as indoor removal processes. In this study, we develop a time-dependent kinetic model describing the behavior of ozone/squalene reaction products indoors, including the reaction process and physical adsorption process of products on indoor surfaces. The key parameters in the model were obtained by fitting time-resolved concentrations of 6-MHO, 4-OPA, and ozone in a university classroom on 1 day with multiple class sessions. The model predictions were subsequently tested against observations from four additional measurement days in the same classroom. Model predictions and experimental data agreed well (R² = 0.87-0.92) for all test days, including ∼7 class sessions covering a range of occupants (10-70) and ozone concentrations (0.09-32 ppb), demonstrating the effectiveness of the model. Accounting for surface uptake of 6-MHO and 4-OPA significantly improved model predictions (R² = 0.52-0.76 without surface uptake), reflecting the importance of including surface interactions to quantitatively represent product behavior in indoor environments.

Synergetic degradation of VOCs by vacuum ultraviolet photolysis and catalytic ozonation over Mn-xCe/ZSM-5

Volatile organic compounds (VOCs) are one of the most important precursors to form the fine particulate matter and photochemical smog, and should be strictly controlled. Vacuum ultraviolet (VUV) photolysis has provided a facile and an effective way to remove VOCs due to its powerful oxidation capability under mild reaction conditions. However, VUV irradiation would generate ozone which brings about secondary pollution. In this study, ZSM-5 supported Mn-Ce mixed oxides (Mn-xCe/ZSM-5) were fabricated as efficient catalysts for ozone catalytic oxidation (OZCO) process, which were applied in combination with VUV photolysis to remove O₃ byproduct and simultaneously facilitate toluene oxidation. The results indicated that the Mn-3Ce/ZSM-5 catalyst considerably enhanced the catalytic degradation efficiency up to 93% for the gas-phase toluene, one of the hazardous VOCs. Meanwhile, almost all the O₃ by-product could be eliminated in the process. It was found that the strong interaction of the MnOCe bond and the variable chemical valence of Mn and Ce based species in the mixed oxides would tune the redox capacity of Mn-xCe /ZSM-5. An increase in surface Ce³⁺ species and surface density of oxygen vacancies would benefit the adsorption and catalytic transformation of O₃ which eventually form the reactive oxygen species over Mn-xCe/ZSM-5.

Exposure Assessment For Air-To-Skin Uptake of Semivolatile Organic Compounds (SVOCs) Indoors

Semivolatile organic compounds (SVOCs) are ubiquitous in the indoor environment and a priority for exposure assessment because of the environmental health concerns that they pose. Direct air-to-skin dermal uptake has been shown to be comparable to the inhalation intake for compounds with certain chemical properties. In this study, we aim to further understand the transport of these types of chemicals through the skin, specifically through the stratum corneum (SC). Our assessment is based on collecting three sequential forehead skin wipes, each hypothesized to remove pollutants from successively deeper skin layers, and using these wipe analyses to determine the skin concentration profiles. The removal of SVOCs with repeated wipes reveals the concentration profiles with depth and provides a way to characterize penetration efficiency and potential transfer to blood circulation. We used a diffusion model applied to surface skin to simulate concentration profiles of SVOCs and compared them with the measured values. We found that two phthalates, dimethyl and diethyl phthalates, penetrate deeper into skin with similar exposure compared to other phthalates and targeted SVOCs, an observation supported by the model results as well. We also report the presence of statistically significant declining patterns with skin depth for most SVOCs, indicating that their diffusion through the SC is relevant and eventually can reach the blood vessels in the vascularized dermis. Finally, using a nontarget approach, we identified skin oxidation products, linked to respiratory irritation symptoms, formed from the reaction between ozone and squalene.

Urban Planning and Smart City Decision Management Empowered by Real-Time Data Processing Using Big Data Analytics

The Internet of Things (IoT), inspired by the tremendous growth of connected heterogeneous devices, has pioneered the notion of smart city. Various components, i.e., smart transportation, smart community, smart healthcare, smart grid, etc. which are integrated within smart city architecture aims to enrich the quality of life (QoL) of urban citizens. However, real-time processing requirements and exponential data growth withhold smart city realization. Therefore, herein we propose a Big Data analytics (BDA)-embedded experimental architecture for smart cities. Two major aspects are served by the BDA-embedded smart city. Firstly, it facilitates exploitation of urban Big Data (UBD) in planning, designing, and maintaining smart cities. Secondly, it occupies BDA to manage and process voluminous UBD to enhance the quality of urban services. Three tiers of the proposed architecture are liable for data aggregation, real-time data management, and service provisioning. Moreover, offline and online data processing tasks are further expedited by integrating data normalizing and data filtering techniques to the proposed work. By analyzing authenticated datasets, we obtained the threshold values required for urban planning and city operation management. Performance metrics in terms of online and offline data processing for the proposed dual-node Hadoop cluster is obtained using aforementioned authentic datasets. Throughput and processing time analysis performed with regard to existing works guarantee the performance superiority of the proposed work. Hence, we can claim the applicability and reliability of implementing proposed BDA-embedded smart city architecture in the real world.

Current Insights into the Biological Action of Squalene

Squalene is a triterpenic compound found in a large number of plants and other sources with a long tradition of research since it was first reported in 1926. Herein a systematic review of studies concerning squalene published in the last 8 years is presented. These studies have provided further support for its antioxidant, anti-inflammatory, and anti-atherosclerotic properties in vivo and in vitro. Moreover, an antineoplastic effect in nutrigenetic-type treatments, which depends on the failing metabolic pathway of tumors, has also been reported. The bioavailability of squalene in cell cultures, animal models, and in humans has been well established, and further progress has been made in regard to the intracellular transport of this lipophilic molecule. Squalene accumulates in the liver and decreases hepatic cholesterol and triglycerides, with these actions being exerted via a complex network of changes in gene expression at both transcriptional and post-transcriptional levels. Its presence in different biological fluids has also been studied. The combination of squalene with other bioactive compounds has been shown to enhance its pleiotropic properties and might lead to the formulation of functional foods and nutraceuticals to control oxidative stress and, therefore, numerous age-related diseases in human and veterinary medicine.

Multiphase Mechanism for the Production of Sulfuric Acid from SO2 by Criegee Intermediates Formed During the Heterogeneous Reaction of Ozone with Squalene

Here we report a new multiphase reaction mechanism by which Criegee intermediates (CIs), formed by ozone reactions at an alkene surface, convert SO₂ to SO₃ to produce sulfuric acid, a precursor for new particle formation (NPF). During the heterogeneous ozone reaction, in the presence of 220 ppb SO₂, an unsaturated aerosol (squalene) undergoes rapid chemical erosion, which is accompanied by NPF. A kinetic model predicts that the mechanism for chemical erosion and NPF originate from a common elementary step (CI + SO₂) that produces both gas phase SO₃ and small ketones. At low relative humidity (RH = 5%), 20% of the aerosol mass is lost, with 17% of the ozone-surface reactions producing SO₃. At RH = 60%, the aerosol shrinks by 30%, and the yield of SO₃ is <5%. This multiphase formation mechanism of H₂SO₄ by CIs is discussed in the context of indoor air quality and atmospheric chemistry.

Sensory evaluation and chemical analysis of exhaled and dermally emitted bioeffluents

Conditions in which exhaled and dermally emitted bioeffluents could be sampled separately or together (whole-body emission) were created. Five lightly dressed males exhaled the air through a mask to another, identical chamber or without a mask to the chamber in which they were sitting; the outdoor air supply rate was the same in both chambers. The carbon dioxide concentration in the chamber with exhaled air was 2000 ppm. Chamber temperatures were 23°C or 28°C, and ozone was present or absent in the supply airflow. When dermally emitted bioeffluents were present, the perceived air quality (PAQ) was less acceptable, and the odor intensity was higher than when only exhaled bioeffluents were present. The presence or absence of exhaled bioeffluents in the unoccupied chamber made no significant difference to sensory assessments. At 28°C and with ozone present, the odor intensity increased and the PAQ was less acceptable in the chambers with whole-body bioeffluents. The concentrations of nonanal, decanal, geranylacetone, and 6-MHO were higher when dermally emitted bioeffluents were present; they increased further when ozone was present. The concentration of squalene then decreased and increased again at 28°C. Dermally emitted bioeffluents seem to play a major role in the sensory nuisance experienced when occupied volumes are inadequately ventilated.

Connecting the Elementary Reaction Pathways of Criegee Intermediates to the Chemical Erosion of Squalene Interfaces during Ozonolysis

Criegee intermediates (CI), formed in alkene ozonolysis, are central for controlling the multiphase chemistry of organic molecules in both indoor and outdoor environments. Here, we examine the heterogeneous ozonolysis of squalene, a key species in indoor air chemistry. Aerosol mass spectrometry is used to investigate how the ozone (O₃) concentration, relative humidity (RH), and particle size control reaction rates and mechanisms. Although the reaction rate is found to be independent of RH, the reaction products and particle size depend upon H₂O. Under dry conditions (RH = 3%) the reaction produces high-molecular-weight secondary ozonides (SOZ), which are known skin irritants, and a modest change in particle size. Increasing the RH reduces the aerosol size by 30%, while producing mainly volatile aldehyde products, increases potential respiratory exposure. Chemical kinetics simulations link the elementary reactions steps of CI to the observed kinetics, product distributions, and changes in particle size. The simulations reveal that ozonolysis occurs near the surface and is O₃-transport limited. The observed secondary ozonides are consistent with the formation of mainly secondary CI, in contrast to gas-phase ozonolysis mechanisms.

Air Pollution and Climate Change Effects on Allergies in the Anthropocene: Abundance, Interaction, and Modification of Allergens and Adjuvants

Air pollution and climate change are potential drivers for the increasing burden of allergic diseases. The molecular mechanisms by which air pollutants and climate parameters may influence allergic diseases, however, are complex and elusive. This article provides an overview of physical, chemical and biological interactions between air pollution, climate change, allergens, adjuvants and the immune system, addressing how these interactions may promote the development of allergies. We reviewed and synthesized key findings from atmospheric, climate, and biomedical research. The current state of knowledge, open questions, and future research perspectives are outlined and discussed. The Anthropocene, as the present era of globally pervasive anthropogenic influence on planet Earth and, thus, on the human environment, is characterized by a strong increase of carbon dioxide, ozone, nitrogen oxides, and combustion- or traffic-related particulate matter in the atmosphere. These environmental factors can enhance the abundance and induce chemical modifications of allergens, increase oxidative stress in the human body, and skew the immune system toward allergic reactions. In particular, air pollutants can act as adjuvants and alter the immunogenicity of allergenic proteins, while climate change affects the atmospheric abundance and human exposure to bioaerosols and aeroallergens. To fully understand and effectively mitigate the adverse effects of air pollution and climate change on allergic diseases, several challenges remain to be resolved. Among these are the identification and quantification of immunochemical reaction pathways involving allergens and adjuvants under relevant environmental and physiological conditions.