Does previous application of silver diammine fluoride influence the bond strength of glass ionomer cement and adhesive systems to dentin? Systematic review and meta-analysis

Silver modified atraumatic restorative treatment: a paradigm shift in dental caries management

Silver diamine fluoride (SDF) and atraumatic restorative treatment (ART) are treatment modalities that are minimally invasive and used for the prevention and control of dental caries. The amalgamation of these two techniques has led to the development of silver modified atraumatic restorative treatment (SMART). In this approach the carious lesion is restored with glass-ionomer cement (GIC) after SDF application. SMART effectively arrests caries without removing additional tooth structure, making it a promising option for caries management in children who lack cooperative ability.This article reviews the literature on SMART, the evidence regarding its applications in dental practice, its advantages, drawbacks, the scope for research, and clinical use.

Effect of Silver Diamine Fluoride on Bonding Performance and Ultra-morphological Characteristics to Sound Dentin

OBJECTIVES

This study aimed to evaluate microtensile bond strength (µTBS) and ultra-morphological characteristic changes in sound dentin resulting from silver diamine fluoride (SDF) when using adhesives.

METHODS

Ninety-six extracted human third molars were divided into the SDF-contaminated dentin group and the sound dentin group. In the SDF-contaminated dentin group, 38% SDF was agitated for 1 min, left undisturbed for 2 min, and rinsed with distilled water for 30 s. Then, each group was further subdivided into six subgroups (n = 8 / group) according to application modes: self-etch mode (SE) and etch-and-rinse mode (ER) followed by three adhesives: (1) Scothbond Universal Plus Adhesive (SUP); (2) G2-Bond Universal Adhesive (G2B); and (3) Clearfil Mega Bond 2 (MB2). All specimens were restored with resin composite and were stored in distilled water for 24 h before μTBS testing. Data from the μTBS test were analyzed using Three-way ANOVA and Duncan test (p < 0.05). The morphology of fractured surface and adhesive-dentin interfaces were evaluated by SEM, TEM, and STEM. Further elemental analysis was done by EDX.

RESULTS

All SDF-contaminated dentin groups demonstrated significantly lower μTBS than sound dentin groups. All ER groups had higher μTBS than SE groups, except for G2B in the sound dentin group. STEM/EDX revealed an SDF-dentin-reacted layer in the SDF-contaminated dentin group.

SIGNIFICANCE

SDF had an adverse effect on adhesives. Additionally, ER mode is preferable when bonded to SDF-contaminated dentin. A calcium and fluoride-contained layer was observed in all SDF-contaminated dentin.

Effect of desensitizing agents on the resin bond strength to sound dentin

This study aimed to evaluate the effect of dentin hypersensitivity treatments on immediate and long-term shear bond strength (SBS) of composite restorations. Ninety non-carious extracted human molars were cut to expose dentin, which was embedded in acrylic resin, and randomly divided into three groups (n = 30/group) according to surface treatment: 1) no treatment (C and C*; control); 2) silver diamine fluoride with potassium iodide (SDF/KI and SDF/KI*; Riva Star); and 3) nano-hydroxyapatite (nHAp and nHAp*; PrevDent). The specimens were etched through the etch-and-rinse technique, followed by universal adhesive application and resin composite cylinders (2.38 mm in diameter × 3.5 mm high). The SBS was tested immediately (24 h after the restoration) and after thermocycling (*) (5000 cycles, 5 °C to 55 °C) at a 0.5 mm/min crosshead speed using a universal testing machine. A stereomicroscope was used to evaluate the mode of failure, and representative scanning electron microscopy (SEM) images were also acquired. Data normality was verified, and two-way ANOVA and Tukey's post hoc tests were performed for multiple comparisons (α = 0.05). The control group presented the highest SBS (27.10 MPa), while SDF/KI* had the lowest values (6.87 MPa). nHAp-based desensitizer exhibited higher SBS than SDF/KI for both immediate (22.6 MPa) and thermocycled (19.03 MPa) conditions. No intragroup difference was evidenced between immediate and thermocycled samples for any group. Most specimens for the C and nHAp groups presented mixed failure, while the SDF/KI groups presented comparable adhesive and mixed failures. The SBS of adhesive restorations after the application of desensitizing agents is material dependent, where SDF/KI reduces SBS values below the acceptable minimum bond strength, while the nHAp application meets the minimally required bond strength.

The Impact of Silver Diamine Fluoride Only or Simultaneously With Potassium Iodide Treatment on the Bond Durability of Resin Composite Material on Primary Teeth

We aim to evaluate the bond strength between resin composite and primary demineralized dentin, pretreated with silver diamine fluoride (SDF) and simultaneous SDF with potassium iodide (KI) after thermal aging. In this in vitro study, human carious-free primary molars were randomly assigned into three groups and prepared by exposing the superficial dentin. The primary dentin of each molar was demineralized. The first group (the control) received saline treatment before bond application. SDF was pretreated for the second group, whereas SDF and KI were used for the third. After that, the pretreated dentin was immediately built with resin composite bonded with a universal adhesive and kept wet for 24 hours. Then, the pretreated molars were prepared into beam specimens for microtensile bond strength (µTBS), 16 for each group, and subjected to thermal aging. Lastly, they were tested using a universal testing machine, and the resulting data were analyzed using one-way analysis of variance (ANOVA) followed by Tukey's post hoc test. It was found that the SDF-KI group had a significant difference with both the control and SDF groups (p < 0.05), while the control and SDF groups showed no significant differences (p = 0.310). The SDF-KI group had the highest mean value of 11.73 ± 4.39 megapascal (MPa). In contrast, the control group had the lowest mean value of 9.31 ± 3.41 MPa. Post hoc pairwise comparison results showed that SDF-KI pretreatment had a significantly higher strength value than the control and SDF groups. Pretreatment of demineralized primary dentin with SDF-KI does not negatively affect the immediate loading of resin composite. However, under the limitation of this study, KI application after SDF pretreatment is recommended to enhance the bond's durability of resin composite to demineralized dentin.

Influence of silver fluoride plus potassium iodine on adhesive properties of primary carious dentin-resin interface: An in vitro study

This paper evaluated the influence of different protocols of silver fluoride (SF) pretreatment of artificial carious lesions on the adhesive interface of composite resin restorations and remineralization of deciduous dentin compared to silver diamine fluoride (SDF). Sixty-four deciduous molar teeth were randomly divided into 8 groups (n = 8) according to the restoration time (immediately - IM; 30 days after SDF/SF treatment - 30 D) and treatment before restoration (SDF 38 %; SDF 38 % + potassium iodide - KI; SF 38 %; SF 38 % +KI). After SDF/SF application, teeth in the IM group were restored with self-etch universal adhesive system/composite resin. Samples in the 30D groups were stored in artificial saliva (37 °C) for 30 days before receiving the same restoring protocol. Beams were obtained from all groups and subjected to bond strength tests (µTBS), ultrastructural qualitative analysis (FEG) and mineral analysis (SEM/EDX; Micro-Raman spectroscopy). The µTBS data were subjected to three-factor ANOVA and multiple comparisons (Holm-Sidak method). Bond strength values (MPa) for IM groups were 16.9 ± 2.7 (SDF); 17.6 ± 3.5 (SDF + KI); 16.8 ± 5.5 (SF); 18.4 ± 4.1 (SF + KI); and 14.9 ± 4.2 (SDF); 16.0 ± 5.4 (SDF + KI); 14.1 ± 3.6(SF); 16.4 ± 5.4 (SF + KI) for 30D groups. Bond strength wasn't influenced by the moment of restoration (IM or 30D); the use of KI didn't alter adhesion characteristics; SDF/SF solutions resulted in similar adhesive strength; calcium and phosphate expressions were identified at the interfaces on IM and 30D moments. However, 30D presented qualitative increase in these ions, compatible with remineralization. It was concluded that the adhesion of composite resin restorations in artificial caries lesions of deciduous teeth treated with SDF (38 %) and SF (38 %) had similar effects in vitro; the use of KI or the moment when restorations were accomplished did not influence the adhesion and all tested protocols promoted remineralization of carious dentin.

Silver diamine fluoride modified atraumatic restorative treatment compared to conventional restorative technique on carious primary molars-A randomized controlled trial

OBJECTIVE

To compare the success of silver diamine fluoride-modified atraumatic restorative technique (SMART) with that of the conventional drill and fill method in restoring carious lesions in primary molars.

METHOD

Children (4-8years old) reporting to a tertiary care hospital setting with asymptomatic cavitated dentinal carious lesions in primary molars were randomly allocated to two groups; SMART and Conventional; and subsequently restored with Glass Ionomer Cement (GIC). Follow-up evaluations were carried out by blinded independent evaluator at 6-months intervals to assess the status of restorations. Primary outcome was the success of restorations at 24 months and the secondary outcome was the child's behaviour and acceptance of the treatment at the time of interventions. Two sample Z-test of proportion, logistic regression analysis and Chi-square test were used to compare the outcomes in two groups.

RESULTS

A total of 226 children (SMART group, 112 and conventional, 114) were included with 280 and 282 GIC restorations placed by the SMART and the conventional method respectively. At 24-months, 459 (81.6 %) primary molars were available for evaluation. Success rates of restorations was 38.4 % and 45.8 % % in SMART and conventional groups respectively (p = 0.105). The rate of acceptability of treatment in the SMART and conventional group was 79 % and 56 % (p<0.001) respectively.

CONCLUSION

There was no significant difference in the success rates of GIC restorations by SMART and conventional technique in carious primary molars at 24 months. SMART was better accepted by children as compared to the conventional restorative technique.

CLINICAL SIGNIFICANCE

SMART can be an alternative option to treat the asymptomatic carious lesions in primary molars and is well accepted by children than the conventional drill and fill technique thus implying that it has a useful role in un-cooperative children.

Mechanical Properties and Clinical Success of Intracanal Posts in Primary Maxillary Anterior Teeth: A Systematic Review and Meta-analysis

Background

Intracanal posts are commonly used to restore lost permanent/primary tooth structure and the smile of the patient.

Aim

This systematic review aims to evaluate the clinical success of intracanal posts used in primary maxillary anterior teeth and compare their mechanical properties.

Methods

An extensive literature search was performed using Medline via PubMed, Embase via embase.com, LILACS, CINAHL via EBSCO, Cochrane Oral Health Group Specialized Register, Scopus, and Web of Science until December 2021 and was updated till December 2022. In vivo and in vitro studies in the English language that assessed clinical success and mechanical properties were included. Distiller SR software was used for everything from title screening to data extraction.

Results

A total of 30 studies were analyzed, including 11 in vivo and 19 in vitro studies. Four studies were included in a meta-analysis, and all 30 studies qualified for qualitative analysis. The meta-analysis showed that fiber posts are clinically superior to composite resin posts (CRPs) (p = 0.02). No significant difference was observed between the fracture resistance of CRPs and no posts (p = 0.73). Most of the included studies showed a high risk of bias.

Conclusion

Conclusive evidence about the effectiveness of various intracanal posts cannot be established. This is due to the limited number of clinical trials and included studies of low to moderate quality with a high risk of bias. To validate the use of posts in primary maxillary anterior teeth, further research, including randomized controlled trials (RCTs) of higher quality, is required.

Clinical significance

The use of intracanal posts in primary teeth is a commonly used treatment modality among pediatric dentists. However, the quality of the evidence to support its use is low. This systematic review provides a comprehensive summary of the current literature and highlights the need for further research. Results were interpreted with caution, as the evidence supporting the use of intracanal posts in primary teeth is limited.

How to cite this article

Shanmugam Y, Raghu A, Muthu MS, et al. Mechanical Properties and Clinical Success of Intracanal Posts in Primary Maxillary Anterior Teeth: A Systematic Review and Meta-analysis. Int J Clin Pediatr Dent 2023;16(S-3):S293-S305.

Comparison of Shear Bond Strength of Three Types of Adhesive Materials Used in the Restoration of Permanent Molars after Treatment with Silver Diamine Fluoride: An In Vitro Study

BACKGROUND

Permanent blackish discoloration of the tooth structure post application of silver diamine fluoride (SDF) is one of its drawbacks. Several restorative materials have been used to restore and mask the blackish discoloration of SDF-treated teeth. Recently, a new self-adhesive material has been introduced and is marketed as an all-in-one etchant, adhesive, and restorative material indicated for use in all clinical situations. This study aimed to assess the shear bond strength of the new self-adhesive restorative material and compare it with adhesive restorative materials- resin-based composite and resin-modified glass ionomer cement to dentin of extracted permanent teeth treated with 38% SDF.

METHODS

Thirty-nine caries-free extracted teeth (n = 39) were grouped into three groups. Following 38% SDF application, the specimens were loaded with resin-based (Group I), the new self-adhesive restorative material (SDR) Surefil (Group II), and resin-modified glass ionomer cement (RMGIC) (Group III). Shear bond strength (SBS) was calculated, and failure modes were evaluated using the universal testing device (3) Results: The composite showed the highest bond strength, followed by Group II while Group III had the lowest bond strength of all tested materials. Regarding failure type, the composite showed 100% adhesive failure, while Group III and Group II showed mostly adhesive failure with some combination. (4) Conclusions: RBC had a significantly stronger SBS to demineralized dentin surfaces of permanent molar teeth treated with SDF when compared to SDR Surefil and RMGIC.

Evaluation of the effect of nano-graphene oxide on shear bond strength of conventional and resin-modified glass ionomer cement

OBJECTIVES

Recently, nano-graphene oxide (nGO), a material with unique mechanical properties, has been introduced to improve the properties of glass ionomer cement (GIC). The purpose of this study was to investigate the effect of adding nGO on the shear bond strength (SBS) of conventional (CGIC) and resin-modified GIC (RMGIC).

METHODS

Sixty intact molars were mounted and their occlusal surface was cut at a depth of 1 mm below the dentinoenamel junction. 1 wt.% and 2 wt.% of nGO (US Research Nanomaterials, Inc.) were added to CGIC and RMGIC (GC Corporation). The samples were randomly divided into six groups (n = 10), including 1: CGIC,  2: CGIC + 1% GO, 3: CGIC + 2% GO, 4: RMGIC, 5: RMGIC + 1% GO, and 6: RMGIC + 2% GO. Plastic molds were placed on the surface of the dentin pretreated with 10% polyacrylic acid (GC Corporation) and filled with prepared cement according to the manufacturer's instruction. After 24 h of storage in an incubator, the SBS test was done by the universal testing machine. Data were analyzed using two-way analysis of variance and post hoc Tukey tests (p < .05).

RESULTS

In the group of CGIC, mean SBS was significantly lower than all other study groups (p < .001), and groups 5 (RMGIC + 1% GO) and 6 (RMGIC + 2% GO) showed significantly higher values compared to all other study groups (p < .001). However, the difference between groups 2 and 3, as well as the difference between groups 5 and 6, was not significant (p = .999 andp = .994, respectively). RMGI groups had significantly higher SBS than their corresponding CGIC groups.

CONCLUSIONS

The addition of 1% and 2% nGO significantly increased the SBS of CGIC and RMGIC to the dentin, which can be considered as a promising point for wider clinical application of this material.

Bonding performance of glass ionomer cement to carious dentin treated with different surface treatment protocols using silver diamine fluoride

This study investigated the influence of silver diamine fluoride (SDF) on the shear bond strength (SBS) to artificial carious dentin and GIC restorations with various SDF application protocols. Artificial caries were prepared on human dentin discs using bacteria model. These samples were randomly allocated to five groups (n = 10/group) according to the following treatment: (1) control group (CD): no treatment (2) CSR: dentin conditioner, SDF, and rinsing (3) CS: dentin conditioner and SDF (4) SRC: SDF, rinsing and dentin conditioner, and (5) SC: SDF and dentin conditioner. The treated-dentin surface was bonded with GIC and subjected to SBS test. Mean SBS was analyzed using one-way ANOVA. Surface morphology and elemental contents after surface treatment were examined (n = 3/group) by scanning electron microscopy with energy-dispersive X-ray spectroscopy (SEM/EDX). There was no significant difference in the mean SBS among CD (2.45 ± 0.99 MPa), CSR (1.76 ± 0.65 MPa), and SRC (2.64 ± 0.95 MPa). Meanwhile, the mean SBS of CS (0.35 ± 0.21 MPa) was significantly lower than the control and SRC group. SEM/EDX demonstrated deeper silver penetration in CSR and CS groups when compared to SRC and SC groups. SDF-modified GIC restorations resulted in significantly lower bond strength in CS and SC groups. The findings suggested treating the carious dentin surface with CSR and SRC protocol. SDF-treated carious dentin should be rinsed off prior to restore with GIC.

Phosphoric Acid Etch Partially Restores the Initial Bond Strength of Composite to Silver Diamine Fluoride-Treated Enamel Using Universal Adhesives

BACKGROUND

Restoring bonding composite to silver diamine fluoride (SDF)-treated enamel is challenging. This study investigates if phosphoric acid etch restores composite bond strength to SDF-treated enamel using universal adhesives.

METHODS

Twenty-four recently extracted permanent teeth were randomly divided into 4 (2 experimental (SDF) and 2 control (CTR)) groups: SDF+Water: SDF (1 min) then water rinse (15 mL); CTR+Water: no treatment and water rinse (15 mL); SDF+Etch+Water: SDF (1 min), 35% phosphoric acid (40 s) then water rinse (15 mL); CTR+Etch+Water no treatment, 35% phosphoric acid (40 s) then water rinse (15 mL). The enamel surface in all the groups was bonded (All-Bond Universal) to 4-5 mm composite blocks (Z-250). Each sample was sectioned, and 6-8 beams (1 mm × 1 mm) were selected. The micro-tensile bond strength was measured by dividing the micro-tensile force peak by the adhesive surface area. Univariate ANOVA and Chi-square were used for between-group comparisons with p < 0.05.

RESULTS

SDF+Water had significantly lower tensile strength compared to all the groups (p < 0.05). Although no difference was found in the tensile strength between the SDF+Etch+Water and the CTR+Etch+Water, the SDF+Etch+Water had significantly more adhesive failures compared to the CTR+Etch+Water (p = 0.047).

CONCLUSIONS

While phosphoric acid etch seems to restore the initial composite bond strength to SDF-treated enamel, the long-term success of composite restorations bonded to SDF-treated enamel may need further investigation.

Influence of the use of remineralizing agents on the tensile bond strength of orthodontic brackets

This study aimed to evaluate the influence of the use of remineralizing agents on the tensile bond strength. The study sample consisted of 80 recently extracted molars, which were randomly divided into four experimental groups (n = 20): groups FG1 and FG30, in which fluoride varnish was used, and groups RG1 and RG30, in which Recaldent tooth mousse was used. The mesiobuccal surfaces served as experimental, and distobuccal as control (n = 80). Brackets were bonded to both surfaces and were submitted to a tension test at different time intervals (T1 and T30). Tensile bond strength (TBS) and the amount of adhesive remnant (ARI) were assessed. A statistically significantly lower mean of TBS compared to the control group was found only in the FG1 group (p < 0.001), and no significant difference was found between the other groups. The FG1 group showed significantly higher ARI scores (p < 0.001) compared to the control group. No significant difference was found between the other groups. In conclusion, bonding brackets one day after applying fluoride varnish significantly reduced the TBS, but after 30 days it was set back to an optimal value. The use of Recaldent before orthodontic treatment had no adverse effect.

Clinical and primary evidence of silver diamine fluoride on root caries management

Root caries is a growing problem for the worldwide aging population. Silver diamine fluoride (SDF) contains high concentrations of silver and fluoride ions, which prevents and arrests root caries, as well as dentin caries in the primary teeth of young children. Unlike other fluoride products that mainly reduce the formation of new carious lesions, 38% SDF is an effective agent that can efficiently arrest the carious process, remineralize the decayed dental tissues, and protect the tooth structure against the formation of new caries lesions. The use of SDF can result in more caries-resistant tooth structures. Despite these merits, its clinical disadvantages are the deep penetration of silver ions and sequential formation of silver compounds, which cause esthetic concern due to the discoloration and impaired efficacy of dentin bonding after using SDF. Thus, this narrative review, by addressing the primary experimental results and clinical applications of SDF on root caries, proposes management methods for root caries in conjunction with the application of SDF. We propose a two-visit treatment protocol to take advantage of the SDF application for root surface caries and utilize the discoloration caused by SDF.

Radiographic Changes to Silver Diamine Fluoride Treated Carious Lesions after a Rinsing Step

Silver diamine fluoride (SDF) is radiopaque. This in vitro study compares the changes in the radiopacity of carious lesions after SDF application, potassium iodide (PI) application, and water rinse. Ten recently extracted human teeth were sectioned and divided into two groups (n = 10 in each group): Group 1 = SDF, Group 2 = SDF + PI. Teeth in Group 1 received SDF for 1 min and rinsed with 15 mL water. Group 2 received the same protocol with the addition of PI application for 1 min after SDF application. All samples were scanned with micro-computed tomography before SDF application, after SDF application, after PI application (group 2) and after water rinse. The radiopacity of the carious lesions increased significantly after SDF application in Group 1 and 2 (p < 0.017, p < 0.008, respectively). A significant increase in radiopacity after PI application was also observed in Group 2 (p < 0.008). Water rinsing significantly decreased the radiopacity in Group 1 and 2 (p < 0.017, p < 0.008, respectively), but the radiopacity remained significantly higher than the preoperative values (Group 1 p < 0.017, Group 2 p < 0.008). The radiopacity of carious lesions increases after SDF and SDF + PI applications. Water rinsing could reduce the radiopacity of SDF and SDF + PI treated carious lesions, and might reduce the content of SDF in carious lesions.

Does silver diammine fluoride concentration influence on bonding to carious dentinal lesions in primary teeth?

PURPOSE

This in vitro study evaluated the microshear bond strength (μSBS) of a universal adhesive after silver diammine fluoride (SDF) application at different concentrations on carious dentinal lesions in primary teeth.

METHODS

Flat dentin carious-induced surfaces from 40 primary molars were randomly assigned to four experimental groups: without SDF treatment (control), 12% SDF, 30% SDF, or 38% SDF application. After 14 days of storage in artificial saliva at 37 °C, a universal adhesive system (Scotchbond Universal, 3 M ESPE) was applied in the etch-and-rinse mode and resin composite cylinders were built (0.72 mm²). After 24 h of water storage, the μSBS test was performed and the failure mode was determined. Data were analysed using one-way ANOVA and Tukey's post hoc tests (α = 0.05).

RESULTS

The application of 38% SDF resulted in higher μSBS mean than control and use of 12% SDF (p = 0.006). No significant differences were observed among control, 12% SDF, and 30% SDF. All specimens tested showed adhesive/mixed failure.

CONCLUSION

The use of SDF does not jeopardise the bonding of a universal adhesive applied in the etch-and-rinse mode to carious dentinal lesions in primary teeth, irrespective of the product concentration.

Evaluation of the Effect of the Loading Time on the Microtensile Bond Strength of Various Restorative Materials Bonded to Silver Diamine Fluoride-Treated Demineralized Dentin

The aim of this study was to evaluate the effect of immediate versus delayed loading times on the microtensile bond strength (μTBS) of restorative materials, including resin-based composite (RBC), resin-modified glass ionomer cement (RMGIC) and glass ionomer cement (GIC), that were bonded to silver diamine fluoride (SDF)-treated demineralized dentin. Ninety caries-free extracted premolar teeth were assigned to three groups (n = 30) loaded with RBC, RMGIC and GIC restorative materials. Each group was further divided into three subgroups (n = 10): subgroup A (control specimens), immediate loading of the restorative material on sound dentin; subgroup B, demineralized dentin, SDF treatment and immediate loading of the restorative material; and subgroup C, demineralized dentin, SDF treatment and restorative material loading a week later. One-way ANOVA and Tukey’s post-hoc tests were performed to compare the μTBS values. The RBC exhibited the highest µTBS, followed by RMGIC and GIC. Multiple comparisons showed an increase in the µTBS in the delayed loading groups irrespective of the restorative material used. The majority of the failure modes were adhesive. Delayed loading of RMGIC for 1 week after SDF application showed significantly higher µTBS than that of immediate loading.

Bond Strength and Microleakage of a Novel Glass Ionomer Cement Containing Silver Diamine Fluoride

Objectives  To investigate the shear bond strength and microleakage of glass ionomer cement (GIC) containing silver diamine fluoride (SDF).

Materials and Methods  Sound human permanent premolars were divided into the following three groups: 1) GIC (Fuji IX), 2) GICSDF-S: GIC + SDF (Saforide), and 3) GICSDF-T: GIC + SDF (Topamine). Shear bond strength ( n  = 14/group) was measured using a universal testing machine and compared between groups (one-way ANOVA and Tukey HSD, p  < 0.05). Microleakage ( n  = 15/group) at enamel and dentin margins was scored using a stereomicroscope (10x) and compared between groups (Chi-square, p  < 0.05).

Results  There were significant differences in shear bond strength between the GIC and GICSDF-S groups and between the GIC and GICSDF-T groups. The GIC group had the lowest shear bond strength among the groups; however, there was no significant difference between the GICSDF-S and GICSDF-T groups. The microleakage test results were not significantly different between groups at the enamel margin or dentin margins. Although the GIC group demonstrated a higher dye penetration score at the enamel and dentin margins, the difference was not significant.

Conclusions  Within the limitations of this study, we conclude that incorporating SDF into GIC results in higher shear bond strength while not increasing microleakage at the enamel and dentin margins.

Effect of Silver Diamine Fluoride Pretreatment on Shear Bond Strength of Resin Modified Glass Ionomer Cement to Primary Dentin

AIM: The aim of the study was to evaluate effect of silver diamine fluoride (SDF) on the shear bond strength (SBS) of glass ionomer restoration to primary dentine. MATERIALS AND METHODS: Twenty extracted primary molars with no restorations or developmental anomalies were only chosen for the study. Twenty dentine slices with 2 mm thickness were prepared and then randomly allocated into two groups (n = 10 per group). For Group 1 (experimental): Dentine surfaces were treated with 38% *SDF solution (Elevate oral care, USA) for 3 min using micro-brush, followed by a 30 s rinse with water and Group 2 (Control): Dentine surfaces were treated with distilled water for 3 min then rinsed for 30 s. The cavity conditioner was applied to flat dentin of both groups for 10 s then washed and dried gently with compressed air. All the specimens were restored with *RMGIC (Riva Light Cure, SDI, Australia). SBS was determined using a Universal Testing machine and Failure mode was evaluated using stereomicroscope. Data were collected and statistically analyzed. Independent t test was used to assess differences in SBS between study groups and mode of failure was analyzed using Fisher’s exact test. Level of significance was set at p ≤ 0.05. IBM SPSS statistical software (version 26) was used to analyze the data. RESULTS: The experimental group had significantly higher mean of shear bond (11.92 ± 3.35) strength than the control group (6.99 ± 2.98) (p = 0.003). CONCLUSIONS: Primary dentin pre-treatment with 38% SDF increases the shear bond strength between RMGIC and primary dentin according to the results of this in vitro study.

Meta-Analysis of In-Vitro Bonding of Glass-Ionomer Restorative Materials to Primary Teeth

Restoration of primary teeth is among the main clinical applications of glass-ionomer cements (GIC). The aim of the study was to review and summarize existing evidence of in vitro bond strength of glass-ionomer (GI) restoratives to enamel and dentin of primary teeth. A literature search was performed in PubMed/Medline, Scopus, Web of Science, Cochrane, and Google Scholar databases to identify studies published until April 2021. The search strategy was: (“glass”) and (“ionomer”) and (“primary” or “deciduous”) and (“bond” or “tensile” or “shear”). Two researchers independently retrieved articles that reported on the bond strength of GIC to primary dentin and/or enamel. The meta-analysis was performed to compare the bond strength values of conventional (C) GIC and resin-modified (RM) GIC to different substrates. From 831 potentially eligible articles, 30 were selected for the full-text examination, and 7 were included in the analysis. Studies were rated at high (3), medium (3), and low (1) risk of bias. RM-GIC showed higher bond strength to primary enamel and dentin compared to the C-GIC. Meta-analysis of in vitro studies, evaluating bonding properties of GI restoratives to primary teeth, suggests the superior performance of RM-GIC. However, there is a lack of studies that examine the properties of novel GI formulations.

Comparative evaluation of shear bond strength of two adhesive materials on demineralized dentin treated with silver diamine fluoride: An in-vitro study

Context

Early childhood caries (ECC) is one of the most common diseases in the children of developing countries, affecting their oral health-related quality of life. From an economic perspective, silver diamine fluoride (SDF) can limit the progression of active carious lesions.

Aims

To estimate and compare the loss of shear bond strength among two adhesive materials on SDF-treated demineralized primary teeth dentin.

Settings and Design

Laboratory setting and in-vitro study design.

Methods and Material

For the in-vitro study, 40 primary teeth indicated for extraction were selected. The demineralization solution was 5% nitric acid. The samples were divided into four groups, Group 1 - GIC Type IX, Group 2 - Self-etch (SE) adhesive + G-Aenial Universal Flo, Group 3 - SDF + GIC Type IX, and Group 4 - SDF + SE adhesive + G-Aenial Universal Flo.

Statistical Analysis Used

Descriptive analysis and analysis of variance with Tukey's Post hoc test.

Results

The shear bond strength of GC G-Aenial Universal Flo(18.8165 ± 13.0448 MPa) found to be superior to GIC (5.7845 ± 1.8968 MPa). However, bond strength was significantly reduced with GC G-Aenial Universal Flo(34.0441 ± 14.1949/18.8165 ± 13.0448 MPa) compared to GIC (7.7956 ± 2.2804/5.7845 ± 1.8968 MPa) following the application of SDF.

Conclusions

It was concluded that SE adhesive + GC G-Aenial Universal Flois the material with better shear bond strength compared to GIC Type IX with and without SDF. Considering the severity and prevalence of ECC, socioeconomic strata of Indian population, the choice of material for masking the discoloration, and prevention of disease, GIC can be suggested as an alternative over GC G-Aenial Universal Flo.

Vital Bleaching Influences the Bond Strength of Adhesive Systems to Enamel and Dentin: A Systematic Review and Meta-Analysis of In Vitro Studies

CLINICAL RELEVANCE

Vital bleaching impairs the bonding of adhesive systems to enamel and dentin. Thus, restoration placement should be delayed for at least two weeks after completion of bleaching procedures.

SUMMARY

Objective: This systematic review evaluates the influence of vital bleaching on the bond strength of adhesive systems to enamel and dentin.Methods: This review was conducted according to Preferred Reporting Items for Systematic Reviews and Meta-analyses (PRISMA). In vitro studies comparing the bond strength of bleached and unbleached enamel and dentin were searched at the electronic databases-PubMed/MEDLINE, Scopus, and Web of Science-with no limit on year or language. The studies were screened and had data extracted by two reviewers independently. Bond strength data were meta-analyzed using the inverse variance method and the random effect model (p≤0.05).Results: The electronic search provided 4941 eligible studies, and 52 were included in the systematic review and the meta-analysis. The global meta-analysis showed that bleaching impairs the bond strength of adhesive systems to enamel and dentin (p<0.001; mean difference [MD]: -0.96; confidence interval [CI]: -1.18 to -0.73), regardless of the bleaching agent (p<0.001; MD: -9.98; CI: -1.37 to -0.58) or substrate (p<0.001; MD: -0.89; CI: -1.12 to -0.66). The detrimental effect of bleaching on bond strength was not observed after two and three weeks after bleaching (p=0.1; MD: -0.39; CI: -0.84 to 0.65; and p=0.18; MD: -0.99; CI: -2.45 to 0.47, respectively).Conclusion: This systematic review and meta-analysis demonstrated that vital bleaching impairs the bonding of adhesive systems to enamel and dentin, and this adverse effect persists for two weeks.

Does the etching strategy influence the bonding of universal adhesive systems to primary teeth? A systematic review and meta-analysis of in vitro studies

PURPOSE

To assess through a systematic review and meta-analysis of in vitro studies, the influence of the etching strategy (etch-and-rinse versus self-etch) of universal adhesive systems on bonding to primary teeth.

METHODS

A systematic search was carried out in PubMed, Web of Science and Scopus. In vitro studies that compared the bond strength of the etching strategies of universal adhesives to primary teeth were included. Pooled-effect estimates were derived from a random-effects model by comparing the standardized mean difference between the etching strategies (α < 0.05). The risk of bias and heterogeneity between studies were also assessed (Cochrane and I2 tests).

RESULTS

Seven studies were included in the review and six in the meta-analyses. For dentin, the immediate bond strength was not influenced by the etching strategy regardless of sound (Z = 0.72, p = 0.47) or caries-affected (Z = 1.27, p = 0.21) substrate, nor after aging (Z = 0.24, p = 0.81). It was not possible to perform a meta-analysis for the enamel substrate. Most studies have a medium risk of bias.

CONCLUSIONS

This systematic review and meta-analysis of in vitro studies provides evidence that universal adhesives can be used in both etching strategies in primary dentin. The evidence is currently insufficient about whether selective acid etching of primary enamel is necessary when universal adhesive systems are used.

Etching time and bonding of adhesive systems to dentin of primary teeth: A systematic review and meta-analysis

BACKGROUND

Due to the chemical and morphological differences between primary vs. permanent teeth, the time reduction of the acid etching or acidic primer can result in higher values of bond strength.

AIM

To assess through a systematic review and meta-analysis the influence of the reducing etching (acid etching or acidic primer) time on the bond strength of adhesive systems to primary dentin.

DESIGN

A systematic search was carried out in 3 databases: PubMed, Web of Science and Scopus. Studies that evaluated the effect of reducing the etching time on the bond strength of adhesive systems to primary dentin were included. Meta-analyses were performed using a random-effects model, with subgroups for etch-and-rinse and self-etching adhesives, with a significance level of P < .05. The risk of bias and heterogeneity between studies (Cochrane and I2 tests) were assessed.

RESULTS

Eight studies were included in the systematic review and seven in the meta-analyses. The shortening etching time did not influence the immediate dentin bond strength for etch-and-rinse (Z = 0.07, P = .95) and self-etching adhesives (Z = 0.41, P = .69). After ageing, however, the shorting etching time improved the bond strength for etch-and-rinse adhesives (Z = 2.01, P = .04). All studies presented high bias risk.

CONCLUSIONS

Reducing the acid-etching time to primary dentin improves the long-term bond strength to this substrate.

Annual review of selected scientific literature: A report of the Committee on Scientific Investigation of the American Academy of Restorative Dentistry

This comprehensive review of the 2019 restorative dental literature is offered to inform busy dentists regarding remarkable publications and noteworthy progress made in the profession. Developed by the Scientific Investigation Committee of the American Academy of Restorative Dentistry, each author brings discipline-specific expertise to 1 of 8 sections of the report: (1) prosthodontics; (2) periodontics, alveolar bone, and peri-implant tissues; (3) implant dentistry; (4) dental materials and therapeutics; (5) occlusion and temporomandibular disorders; (6) sleep-related breathing disorders; (7) oral medicine and oral and maxillofacial surgery; and (8) dental caries and cariology. The report targets important information likely to influence day-to-day dental treatment decisions. Each review is not intended to stand alone but to update interested readers so that they may visit source material when greater detail is desired. As the profession moves toward evidence-based clinical decision-making, an incredible volume of potentially valuable dental literature continues to increase. It is the intention of this review and its authors to provide assistance in negotiating the extensive dental literature published in 2019. It is our hope that readers find this work useful in the clinical management of dental patients.