Evaluation of novel nystatin nanoemulsion for skin candidosis infections

Lipid-Based Formulation of Baricitinib for the Topical Treatment of Psoriasis

BACKGROUND

Baricitinib, commonly used for autoimmune diseases, is typically administered orally, which can lead to systemic adverse effects. A topical formulation could potentially offer localized therapeutic effects while minimizing these side effects.

OBJECTIVES

This study focuses on developing a lipid-based topical formulation of baricitinib (BCT-OS) for treating psoriasis.

METHODS

The optimized formulation was then assessed for physical, chemical, and biopharmaceutical characterization. Furthermore, the anti-inflammatory efficacy of the formulation was tested in a model of psoriasis induced by imiquimod in mice, and its tolerance was determined by the evaluation of biomechanical skin properties and an inflammation test model induced by xylol in mice.

RESULTS

BCT-OS presented appropriate characteristics for skin administration in terms of pH, rheology, extensibility, and stability. The formulation also demonstrated a notable reduction in skin inflammation in the mouse model, and high tolerability without affecting the skin integrity.

CONCLUSIONS

BCT-OS shows promise as an alternative treatment for psoriasis, offering localized therapeutic benefits with a potentially improved safety profile compared to systemic administration.

A Perspective on Various Facets of Nanoemulsions and its Commercial Utilities

Nanotechnology is a captivating contemporary technology owing to its extensive range of potential applications. This study emphasizes nanomaterials, substances with a size <100 nm, offering better qualities than coarse particles. Nanoparticles have several advantages compared with conventional drug delivery methods, including enhanced bioavailability and a larger surface area because of their smaller particle size. These characteristics make the nanoparticles a viable clinical candidate. Controlled-release drug delivery systems and targeted drug delivery systems rely heavily on nanoparticles. Because traditional drug delivery methods fail to achieve targeted drug delivery, resulting in toxicity, low bioavailability, poor therapeutic outcomes, and so on, these drug nanoparticles excel in all these areas. Researchers are already interested in developing drug delivery systems such as niosomes, bilosomes, and dendrimers. Nanoemulsion is one of these technologies; nanoemulsions outperform traditional emulsions in terms of pharmacodynamics and pharmacokinetics. Nanoemulsion effectively surpasses the constraints of standard emulsions, primarily by offering enhanced bioavailability, reduced toxicity, improved absorption, and the potential to be used in targeted drug delivery or controlled-release drug delivery systems. This particular work explores several aspects of nanoemulsions, including their constituents, classification, techniques for preparation, criteria for assessment, commercial applications, and future prospects.

Nanotechnology's frontier in combatting infectious and inflammatory diseases: prevention and treatment

Inflammation-associated diseases encompass a range of infectious diseases and non-infectious inflammatory diseases, which continuously pose one of the most serious threats to human health, attributed to factors such as the emergence of new pathogens, increasing drug resistance, changes in living environments and lifestyles, and the aging population. Despite rapid advancements in mechanistic research and drug development for these diseases, current treatments often have limited efficacy and notable side effects, necessitating the development of more effective and targeted anti-inflammatory therapies. In recent years, the rapid development of nanotechnology has provided crucial technological support for the prevention, treatment, and detection of inflammation-associated diseases. Various types of nanoparticles (NPs) play significant roles, serving as vaccine vehicles to enhance immunogenicity and as drug carriers to improve targeting and bioavailability. NPs can also directly combat pathogens and inflammation. In addition, nanotechnology has facilitated the development of biosensors for pathogen detection and imaging techniques for inflammatory diseases. This review categorizes and characterizes different types of NPs, summarizes their applications in the prevention, treatment, and detection of infectious and inflammatory diseases. It also discusses the challenges associated with clinical translation in this field and explores the latest developments and prospects. In conclusion, nanotechnology opens up new possibilities for the comprehensive management of infectious and inflammatory diseases.

Nanotechnology-based Drug Delivery of Topical Antifungal Agents

Among the various prominent fungal infections, superficial ones are widespread. A large number of antifungal agents and their formulations for topical use are commercially available. They have some pharmacokinetic limitations which cannot be retracted by conventional delivery systems. While nanoformulations composed of lipidic and polymeric nanoparticles have the potential to overcome the limitations of conventional systems. The broad spectrum category of antifungals i.e. azoles (ketoconazole, voriconazole, econazole, miconazole, etc.) nanoparticles have been designed, prepared and their pharmacokinetic and pharmacodynamic profile was established. This review briefly elaborates on the types of nano-based topical drug delivery systems and portrays their advantages for researchers in the related field to benefit the available antifungal therapeutics.

Synthesis and characterization of Hyaluronic Acid (HA) modified polymeric composite for effective treatment of wound healing by transdermal drug delivery system (TDDS)

The present study aimed to fabricate a novel polymeric spongy composite to enhance skin regeneration composed of Nystatin (antifungal agent) and Silver Nanoparticles (AgNps). Different formulations (F1-F8) were developed & characterized by using various analytical techniques. AgNps synthesized by chemical reduction method showed spherical morphology 2 µm in size showed by SEM and XRD. A fine porous structure of gel embedded with AgNps having an amorphous structure with 10 % crystallinity due to AgNps was found. IR spectra revealed no chemical interaction between polymers and Nystatin. An increase in thermal stability of formulation was observed till 700 ℃ analyzed by Differential Scanning Calorimetry. Cytotoxic analysis on L929 mouse skin fibroblast cells showed a decrease in cell viability as Ag concentration increased (inactivating Fibroblast and keratinocytes) while 10 mg composition was found safest concentration (94%). Optimized formulation (F2) presented in-vitro drug release up to 90.59% ± 0.76 at pH 7.4, swelling studies (87.5% ± 0.57), water retention (26.60 ± 0.34), pH (5.31 ± 0.03). In the animal burn model, the group that received CHG/Ag/Nystatin healed the wound significantly (p < 0.05). These results suggested that optimized carrier can be used for other anti-fungal drugs facilitating the early healing of the wound.

Reviving the interest in the versatile drug nystatin: A multitude of strategies to increase its potential as an effective and safe antifungal agent

Nystatin is an antifungal molecule with a remarkable yet squandered versatility. In this review, its mechanism of action is explored, along with its extensive action spectrum and toxicity. A multitude of methodologies to tackle the drug's physical and chemical hurdles are outlined along with some proven-effective strategies to increase its activity and/or decrease its toxicity. A separate detailed section focused on micro and nanotechnology solutions addresses new drug delivery systems made of polymeric, metallic or lipid materials. Although the topical route depicts greater representativeness amongst these formulations, the intravenous, dental, oral, vaginal and inhalation routes are also mentioned. The unsuccessful previous attempts at developing parenteral formulations of nystatin or even the withdrawal of a nystatin-loaded multilamellar liposome should not divert research away from this drug. In fact, the interest in nystatin ought to be reawakened with the ongoing clinical trials on the promising nystatin-like genetically engineered derivate BSG005.

Microneedle-assisted transdermal delivery of nanoparticles: Recent insights and prospects

Transdermal delivery of drugs offers an interesting alternative for the administration of molecules that present certain troubles when delivered by the oral route. It can produce systemic effects or perform a local action when the formulation exerts an optimal controlled drug release or a targeted delivery to the specific cell type or site. It also avoids several inconveniences of the oral administration such as the hepatic first pass effect, gastric pH-induced hydrolysis, drug malabsorption because of certain diseases or surgeries, and unpleasant organoleptic properties. Nanomedicine and microneedle array patches (MAPs) are two of the trendiest delivery systems applied to transdermal research nowadays. However, the skin is a protective barrier and nanoparticles (NPs) cannot pass through the intact stratum corneum. The association of NPs and MAPs (NPs@MAPs) work synergistically, since MAPs assist NPs to bypass the outer skin layers, and NPs contribute to the system providing controlled drug release and targeted delivery. Vaccination and tailored therapies have been proposed as fields where both NPs and MAPs have great potential due to inherent characteristics. MAPs conception and easy use could allow self-administration and therefore facilitate mass vaccination campaigns in undeveloped areas with weak healthcare services. Additionally, nanomedicine is being explored as a platform to personalize therapies in such an important field as oncology. In this work we show recent insights that prove the benefits of NPs@MAPs association and analyze the prospects and the discrete interest of the industry in NPs@MAPs, evaluating different limiting steps that restricts NPs@MAPs translation to the clinical practice. This article is categorized under: Nanotechnology Approaches to Biology > NA Therapeutic Approaches and Drug Discovery > NA.

Formulation, In Vitro Characterization and Antibacterial Activity of Chitosan-Decorated Cream Containing Bacitracin for Topical Delivery

(1) Background: Bacitracin is a broad spectrum antibiotic that is used against various microorganisms. Chitosan is a natural polymer that has been widely investigated as an antimicrobial agent for preventing and treating infections owing to its intrinsic antimicrobial properties, as well as its ability to effectively deliver extrinsic antimicrobial compounds to infected areas. Topical drug delivery offers important benefits for improving the therapeutic effect and reducing systemic side effects of administered compounds/drugs. The topical use of chitosan-decorated bacitracin-loaded cream improves the permeation of the drug across the skin and enhances the drug bioavailability by prolonging the residence time of the drug when applied topically, as well as producing synergistic effects and reducing the side effects of the drug. Topical chitosan-decorated cream can be a promising approach to administer the drug more efficiently and enhance the efficacy of treatment in wound healing and antibacterial activity. (2) Methods: This study was conducted to prepare, assess and investigate the synergistic antibacterial activity of a chitosan-coated bacitracin cream. The results were compared to the antibacterial activity of simple bacitracin-loaded cream. The prepared cream was evaluated for various in vitro characteristics such as rheology, pH, viscosity, drug content and antibacterial activity studies. (3) Result: The formulations were found to be stable regarding color, liquefaction and phase separation at all accelerated conditions. It was observed that with time, substantial variations in the pH of the preparations were found. The introduction of chitosan results in controlled release of the drug from the formulations. The antibacterial activity of the formulated creams was assessed with the disc diffusion method against Staphylococcus aureus(ATCC),Escherichiacoli (STCC),Pseudomonas aeruginosa(ATCC) and Bacillus cereus(ATCC). The strains, E. coli, S. aureus, P. aeruginosa and B. cereus were susceptible to 50 µg chitosan-decorated bacitracin cream, showing inhibition zones of 10 ± 0.6, 34 ± 1.5, 31 ± 0.76 and 21 ± 2.02 mm, respectively. The zones of inhibition for simple bacitracin-loaded cream were significantly smaller than chitosan-decorated cream, at 2 ± 0.2, 28 ± 0.92, 15 ± 0.5 and 11 ± 1.25 mm (ANOVA; p < 0.05), respectively. (4) Conclusion: It was observed that the zones of inhibition of simple bacitracin-loaded cream were significantly smaller than those of chitosan-decorated bacitracin-loaded cream. Chitosan synergistically improves the antimicrobial activity of bacitracin. Hence, the developed formulation was effective and should be considered as a suitable candidate for topical management of skin infections and wound healing.

Polyene Antibiotics Physical Chemistry and Their Effect on Lipid Membranes; Impacting Biological Processes and Medical Applications

This review examined a collection of studies regarding the molecular properties of some polyene antibiotic molecules as well as their properties in solution and in particular environmental conditions. We also looked into the proposed mechanism of action of polyenes, where membrane properties play a crucial role. Given the interest in polyene antibiotics as therapeutic agents, we looked into alternative ways of reducing their collateral toxicity, including semi-synthesis of derivatives and new formulations. We follow with studies on the role of membrane structure and, finally, recent developments regarding the most important clinical applications of these compounds.

Nanoemulsion delivery systems for enhanced efficacy of antimicrobials and essential oils

The ever-growing threat of new and existing infectious diseases in combination with antimicrobial resistance requires the need for innovative and effective forms of drug delivery. Optimal drug delivery systems for existing and newly developed antimicrobials can enhance drug bioavailability, enable site-specific drug targeting, and overcome current limitations of drug formulations such as short elimination half-lives, poor drug solubility, and undesirable side effects. Nanoemulsions (NE) consist of nanometer-sized droplets stabilized by emulsifiers and are typically more stable and permeable due to their smaller particle sizes and higher surface area compared to conventional emulsions. NE have been identified as a promising means of antimicrobial delivery due to their intrinsic antimicrobial properties, ability to increase drug solubility, stability, bioavailability, organ and cellular targeting potentials, capability of targeting biofilms, and potential to overcome antimicrobial resistance. Herein, we discuss non-drug loaded essential oil-based NE that can confer antimicrobial actions through predominantly physical or biochemical mechanisms without drug payloads. We also describe drug-loaded NE for enhanced antimicrobial efficacy by augmenting the potency of existing antimicrobials. We highlight the versatility of NE to be administered through multiple different routes (oral, parenteral, dermal, transdermal, pulmonary, nasal, ocular, and rectal). We summarize recent advances in the clinical translation of antimicrobial NE and shed light on future development of effective antimicrobial therapy to combat infectious diseases.

Design of transfersomal nanocarriers of nystatin for combating vulvovaginal candidiasis; A different prospective

The objective of this study was to prepare and evaluate Nystatin (NYS) loaded transfersomes to achieve better treatment of vulvovaginal candidiasis. Nystatin transferosomes were formulated utilizing thin film hydration method. A 3² full factorial design was employed to evaluate the effect of different formulation variables. Two independent variables were chosen; the ratio between lecithin surfactant (X₁) was set at three levels (10-40), and the type of surfactants (X₂) was set at three levels (Span 60, Span 85 and Pluronic F-127). The dependent responses were; entrapment efficiency (Y₁: EE %), vesicles size (Y₂: VS) and release rate (Y₃: RR). Design Expert® software was utilized to statistically optimize formulation variables. The vesicles revealed high NYS encapsulation efficiency ranging from 97.35 ± 0.03 to 98.01 ± 0.20% whereas vesicle size ranged from 194.8 ± 20.42 to 400.8 ± 42.09 nm. High negative zeta potential values indicated good stability of the prepared formulations. NYS release from transfersomes was biphasic and the release pattern followed Higuchi's model. The optimized formulation (F7) exhibited spherical morphology under transmission electron microscopy (TEM). In-vitro and in-vivo antifungal efficiency studies revealed that the optimized formula F7 exhibited significant eradication of candida infestation in comparison to free NYS. The results revealed that the developed NYS transfersomes could be a promising drug delivery system to enhance antifungal efficacy of NYS.

Nanoemulsion-based dissolving microneedle arrays for enhanced intradermal and transdermal delivery

The development of dissolving microneedles (DMN) is one of the advanced technologies in transdermal drug delivery systems, which precisely deliver the drugs through a rapid dissolution of polymers after insertion into the skin. In this study, we fabricated nanoemulsion-loaded dissolving microneedle (DMN) arrays for intradermal and transdermal drug delivery. For this task, model drug (amphotericin B, AmB)-loaded nanoemulsion (NE) were prepared by the probe-sonication method. AmB-loaded-NE was prepared using Capmul MCM C-8 EP/NF, Tween^® 80, poly(vinyl alcohol) (PVA-10 kDa), and poly (vinyl pyrrolidone) (PVP-360 kDa or K29/32) by using SpeedMixer™, followed by probe-sonication and evaluated for particle size and polydispersity index (PDI). Transmission electron microscopy (TEM) was also used to assess the particle size before and after DMN casting. AmB-NE embedded DMN arrays were found to be strong enough, revealed efficient skin insertion, and penetrated down to the fourth layer (depth ≈ 508 μm) of Parafilm M^® (validated skin model). Ex vivo skin deposition experiments in full-thickness neonatal porcine demonstrated that after 24 h, AmB-NE-DMN arrays were able to deposit 111.05 ± 48.4 µg/patch AmB into the skin. At the same time, transdermal porcine skin permeation studies showed significantly higher permeability of AmB (29.60 ± 8.23 μg/patch) from AmB-NE-DMN compared to MN-free AmB-NE patches (5.0 ± 6.15 μg/patch) over 24 h. Antifungal studies of optimized AmB-NE-DMN, AmB-loaded discs and drug-free DMN against Candida albicans, confirmed the synergistic activity of Campul-MCM C-8, used in the nanoemulsion formulation. This study establishes that nanoemulsion based dissolving microneedle may serve as an efficient system for intradermal as well as transdermal drug delivery.

Striking Back against Fungal Infections: The Utilization of Nanosystems for Antifungal Strategies

Fungal infections have become a major health concern, given that invasive infections by Candida, Cryptococcus, and Aspergillus species have led to millions of mortalities. Conventional antifungal drugs including polyenes, echinocandins, azoles, allylamins, and antimetabolites have been used for decades, but their limitations include off-target toxicity, drug-resistance, poor water solubility, low bioavailability, and weak tissue penetration, which cannot be ignored. These drawbacks have led to the emergence of novel antifungal therapies. In this review, we discuss the nanosystems that are currently utilized for drug delivery and the application of antifungal therapies.

Nanoparticles as a Tool for Broadening Antifungal Activities

Fungal infections are diseases that are considered neglected although their infection rates have increased worldwide in the last decades. Thus, since the antifungal arsenal is restricted and many strains have shown resistance, new therapeutic alternatives are necessary. Nanoparticles are considered important alternatives to promote drug delivery. In this sense, the objective of the present study was to evaluate the contributions of newly developed nanoparticles to the treatment of fungal infections. Studies have shown that nanoparticles generally improve the biopharmaceutical and pharmacokinetic characteristics of antifungals, which is reflected in a greater pharmacodynamic potential and lower toxicity, as well as the possibility of prolonged action. It also offers the proposition of new routes of administration. Nanotechnology is known to contribute to a new drug delivery system, not only for the control of infectious diseases but for various other diseases as well. In recent years, several studies have emphasized its application in infectious diseases, presenting better alternatives for the treatment of fungal infections.

Bursting the Virulence Traits of MDR Strain of Candida albicans Using Sodium Alginate-based Microspheres Containing Nystatin-loaded MgO/CuO Nanocomposites

INTRODUCTION

Candida albicans is a major opportunistic pathogen that causes a wide range of human infections. Currently available therapeutic agents are limited for treating these fungal infections due to multidrug resistance as well as their nonbiodegradability, poor biocompatibility and toxicity. In order to battle these limitations, we have synthesized a polymeric system as microcarriers to deliver the antifungal drug. The objective of the present study was to immobilize MgO/CuO nanocomposite and nystatin-loaded MgO/CuO nanocomposites in nontoxic, nonimmunogenic, biodegradable and biocompatible sodium alginate microspheres for the first time.

MATERIALS AND METHODS

Nanoparticle-loaded sodium alginate microspheres were prepared by ionotropic gelation technique using calcium chloride as a cross-linker. Synthesized microspheres were characterized using standard characterization techniques and were evaluated for biological activity against MDR strain of C. albicans.

RESULTS

Characterization of microspheres by Fourier-transform infrared spectroscopy confirmed loading of Nys-MgO/CuO NPs, scanning electron microscopy (SEM) revealed rough spherical beads with a highly porous surface having an average size in the range of 8-10 µm. X-ray diffraction (XRD) analyzed its semicrystalline structure. Entrapment efficiency of Nys-MgO/CuO NPs was 80% and release kinetic study revealed sustained and prolonged release of drug in pH 5.5. Flow cytometry analysis showed yeast cell death caused by Nys-MgO/CuO MS exhibits late apoptotic features. In cytotoxicity assay 5-14 mg of microspheres did not cause hemolysis. Microspheres reduced virulence traits of C. albicans such as germ tube and biofilm formation were compromised at concentration of 5 mg/mL. Antimicrobial assessment results revealed a pronounced inhibitory effect against C. albicans.

CONCLUSION

The in vitro experiments have shown promising results based on good stability, Nys-MgO/CuO NP-encapsulated microspheres can be used as a prolonged controlled release system against MDR pathogenic C. albicans.

Apremilast Microemulsion as Topical Therapy for Local Inflammation: Design, Characterization and Efficacy Evaluation

Apremilast (APR) is a selective phosphodiesterase 4 inhibitor administered orally in the treatment of moderate-to-severe plaque psoriasis and active psoriatic arthritis. The low solubility and permeability of this drug hinder its dermal administration. The purpose of this study was to design and characterize an apremilast-loaded microemulsion (APR-ME) as topical therapy for local skin inflammation. Its composition was determined using pseudo-ternary diagrams. Physical, chemical and biopharmaceutical characterization were performed. Stability of this formulation was studied for 90 days. Tolerability of APR-ME was evaluated in healthy volunteers while its anti-inflammatory potential was studied using in vitro and in vivo models. A homogeneous formulation with Newtonian behavior and droplets of nanometric size and spherical shape was obtained. APR-ME released the incorporated drug following a first-order kinetic and facilitated drug retention into the skin, ensuring a local effect. Anti-inflammatory potential was observed for its ability to decrease the production of IL-6 and IL-8 in the in vitro model. This effect was confirmed in the in vivo model histologically by reduction in infiltration of inflammatory cells and immunologically by decrease of inflammatory cytokines IL-8, IL-17A and TNFα. Consequently, these results suggest that this formulation could be used as an attractive topical treatment for skin inflammation.

Direct observation of nystatin binding to the plasma membrane of living cells

Nystatin is an antifungal polyene macrolide which is widely applied to treat yeast infections. Nystatin has also been used as a laboratory tool to inhibit endocytic processes in mammalian cells. The interaction of nystatin with model membranes has been studied thoroughly by various spectroscopic methods, making use of its weak fluorescence in the ultraviolet (UV). Studying its interaction with cells would require direct imaging, which, so far, required attachment of a fluorophore to nystatin. Using UV-sensitive microscopy, we show here how to visualize the interaction of nystatin with the plasma membrane (PM) directly. We find that nystatin forms micron-sized aggregates in buffer, and molecular dynamics simulations confirm that nystatin rapidly self-assembles into aggregates in aqueous solution. Using UV-sensitive microscopy, we find that large nystatin aggregates adhere to the surface of Chinese Hamster Ovarian (CHO) cells, causing slow spreading of nystatin fluorescence into the PM. Binding of nystatin to CHO cells does not interfere with cellular uptake or lateral membrane diffusion of the cholesterol analogue TopFluor-cholesterol (TF-Chol). Nystatin binds extensively to the PM of yeast cells as inferred from a strong UV signal in this membrane. Loading a yeast mutant unable to synthesize ergosterol with cholesterol gave much less nystatin membrane staining compared to loading such cells with ergosterol. These results explain the selective fungicidal effect of nystatin by differential interaction of nystatin with yeast membranes containing ergosterol compared to the mammalian cholesterol. Our combined experimental and computational approach provides a toolset for future design of new polyene macrolides.

A Novel Nanoemulsion Intermediate Gel as a Promising Approach for Delivery of Itraconazole: Design, In Vitro and Ex Vivo Appraisal

The aim the study was to design, formulate, and evaluate self-nanoemulsifying drug delivery systems (SNEDDS) of itraconazole for improving the topical antifungal properties of the drug by adopting the nanoemulsion intermediate gel of the optimized system. Solubility study was conducted to select the most appropriate oils and surfactants for formulation. Different possible systems were created. Ternary phase diagrams were constructed to select the most promising system for further study. The nanoemulsion intermediate gel of the selected system was evaluated for stability, dilution effect, viscosity, pH, antifungal activity, droplet size, PDI, and zeta potential. In vitro release of the drug from the selected intermediate gel was investigated, and the kinetic model of drug release was determined. Ex vivo permeation of itraconazole was studied, and the amount of drug accumulated in the skin was calculated. Solubility and phase diagrams revealed that the system consisting of 60% cotton seed oil and 40% span 80 provided the nanoemulsion intermediate gel with the highest drug concentration. The selected system had a droplet size of about 236 nm and zeta potential of - 59.8. The viscosity of the corresponding intermediate gel was 1583.47 cp. The system exhibited high stability at 4°C and 25°C for 12 months and improved antifungal activity. In vitro release study showed complete release of itraconazole within 4 h, while the ex vivo permeation study revealed accumulation of the majority of the drug within the skin layers (72.5%).

Current Insights on Antifungal Therapy: Novel Nanotechnology Approaches for Drug Delivery Systems and New Drugs from Natural Sources

The high incidence of fungal infections has become a worrisome public health issue, having been aggravated by an increase in host predisposition factors. Despite all the drugs available on the market to treat these diseases, their efficiency is questionable, and their side effects cannot be neglected. Bearing that in mind, it is of upmost importance to synthetize new and innovative carriers for these medicines not only to fight emerging fungal infections but also to avert the increase in drug-resistant strains. Although it has revealed to be a difficult job, new nano-based drug delivery systems and even new cellular targets and compounds with antifungal potential are now being investigated. This article will provide a summary of the state-of-the-art strategies that have been studied in order to improve antifungal therapy and reduce adverse effects of conventional drugs. The bidirectional relationship between Mycology and Nanotechnology will be also explained. Furthermore, the article will focus on new compounds from the marine environment which have a proven antifungal potential and may act as platforms to discover drug-like characteristics, highlighting the challenges of the translation of these natural compounds into the clinical pipeline.

Nanosystems against candidiasis: a review of studies performed over the last two decades

The crescent number of cases of candidiasis and the increase in the number of infections developed by non-albicans species and by multi-resistant strains has taken the attention of the scientific community, which has been searching for new therapeutic alternatives. Among the alternatives found the use of nanosystems for delivery of drugs already commercialized and new biomolecules have grown, in order to increase stability, solubility, optimize efficiency and reduce adverse effects. In view of the growing number of studies involving technological alternatives for the treatment of candidiasis, the present review came with the intention of gathering studies from the last two decades that used nanotechnology for the treatment of candidiasis, as well as analysing them critically and pointing out the future perspectives for their application with this purpose. Different studies were considered for the development of this review, addressing nanosystems such as metallic nanoparticles, mesoporous silica nanoparticles, polymeric nanoparticles, liposomes, nanoemulsion, microemulsion, solid lipid nanoparticle, nanostructured lipid carrier, lipidic nanocapsules and liquid crystals; and different clinical presentations of candidiasis. As a general overview, nanotechnology has proven to be an important ally for the treatment against the diversity of candidiasis found in the clinic, whether in increasing the effectiveness of commercialized drugs and reducing their adverse effects, as well as allowing exploring more effectively properties therapeutics of new biomolecules.

Recent advances in topical carriers of anti-fungal agents

Fungal skin infections are the most common global issue for skin health. Fungal infections are often treated by topical or systemic anti-fungal therapy. Topical fungal therapy is usually preferred because of their targeted therapy and fewer side effects. Advanced topical carriers because of their distinct structural and functional features, overcome biopharmaceutical challenges associated with conventional drug delivery systems like poor retention and low bioavailability. Literature evidence indicated topical nanocarriers loaded with anti-fungal agents display superior therapeutic response with minimum toxicity. Nanocarriers often used for topical anti-fungal medication includes Solid-Lipid nanoparticles, Microemulsions, Liposomes, Niosomes, Microsponge, Nanogel, Nanoemulsion, Micelles etc. This review summarizes recent advances in novel strategies employed in topical carriers to improve the therapeutic performance of anti-fungal drugs.

Mapping the Impact of a Polar Aprotic Solvent on the Microstructure and Dynamic Phase Transition in Glycerol Monooleate/Oleic Acid Systems

OBJECTIVES

The impact of incorporating a polar aprotic solvent, dimethyl sulfoxide (DMSO), in glycerol monooleate/oleic acid systems was evaluated briefly to map its influence on the gel microstructure and dynamic phase transition in controlling the performance of a polyene antifungal drug delivery system.

MATERIALS AND METHODS

An in situ gelling fluid precursor system (IGFPS) exhibiting inverse lyotropic liquid crystalline phases was developed by simple solution add-mixture method. Polarized light microscopy, small angle X-ray scattering (SAXS), differential scanning calorimetry (DSC), and oscillatory rheological assessments were performed to ascertain microstructural modulations. The developed system was examined for minimum gelling volume, gelling time, swelling behavior, mucoadhesion, in vitro antifungal activity, and in vitro drug release.

RESULTS

The SAXS study identifies the coexistence of Im3m cubic phase with HCP P63/mmc hexagonal structures. The SAXS and DSC data highlight DMSO's unique ability to work both as a kosmotropic or chaotropic solvent and to be a function of its concentration. The in vitro antifungal test results indicate the concentration of DMSO to be a controlling factor in drug release and diffusion. The in vitro drug release kinetic studies reveal that most of the gel samples follow the matrix model and anomalous type release as implied by Peppas model.

CONCLUSION

Finally, the antifungal IGFPS formulated was found to have the required low viscosity, responsive sol-gel phase transition, appreciative mechanical properties, and desirable antifungal effect with sustained drug release performance.

Ultrasound-Assisted Preparation of Exopolysaccharide/Nystatin Nanoemulsion for Treatment of Vulvovaginal Candidiasis

PURPOSE

As one of the classic anti-Canidia albicans (CA) and vulvovaginal candidiasis (VVC) drugs, nystatin (NYS) is limited by poor water solubility and easy aggregation. Traditional NYS vaginal delivery formulations do not fully adapt to the specific environment of the vaginal cavity. The use of exopolysaccharides (EPS) has great application potential in emulsifiers, but its use has not been reported in nanoemulsions. In this work, an EPS/NYS nanoemulsion (ENNE) was developed to improve the activities of NYS against CA and VVC.

METHODS

The ENNE was prepared by ultrasonic method using EPS as an emulsifier, liquid paraffin oil as an oil phase, PEG400 as a co-emulsifier, and NYS as the loaded drug. ENNE preparation was optimized by response surface method. After optimization, in vitro and in vivo analysis of the anti-CA activity; animal experiments; staining with propidium iodide (PI), periodic acid-schiff (PAS), and hematoxylin-eosin (H&E); and cytokine experiments were performed to investigate the therapeutic ability against VVC.

RESULTS

The optimal formulation and preparation parameters of ENNE were determined as follows: EPS content of 1.5%, PEG400 content of 3.2%, NYS content of 700 μg/mL, paraffin oil content of 5.0%, ultrasonic time of 15 min, and ultrasonic amplitude of 35%. The ENNE showed an encapsulated structure with an average particle size of 131.1 ± 4.32 nm. ENNE exhibited high storage and pH stability, as well as slow release. The minimum inhibitory concentration (MIC) of ENNE against CA was only 0.125 μg/mL and the inhibition zone was 19.0 ± 0.5 mm, for greatly improved anti-CA effect. The prepared ENNE destroyed the membrane of CA cells, and exhibited good anti-CA effect in vivo and therapeutic ability against VVC.

CONCLUSION

The results of this study will promote the application of EPS in nanotechnology, which should lead to new and effective local drug formulations for treating VVC.

Topical Drug Delivery of Anti-infectives Employing Lipid-Based Nanocarriers: Dermatokinetics as an Important Tool

BACKGROUND

The therapeutic approaches for the management of topical infections have always been a difficult approach due to lack of efficacy of conventional topical formulations, high frequency of topical applications and non-patient compliance. The major challenge in the management of topical infections lies in antibiotic resistance which leads to severe complications and hospitalizations resulting in economic burden and high mortality rates.

METHODS

Topical delivery employing lipid-based carriers has been a promising strategy to overcome the challenges of poor skin permeation and retention along with large doses which need to be administered systemically. The use of lipid-based delivery systems is a promising strategy for the effective topical delivery of antibiotics and overcoming drug-resistant strains in the skin. The major systems include transfersomes, niosomes, ethosomes, solid lipid nanoparticles, nanostructured lipid carriers, microemulsion and nanoemulsion as the most promising drug delivery approaches to treat infectious disorders. The main advantages of these systems include lipid bilayer structure which mimics the cell membrane and can fuse with infectious microbes. The numerous advantages associated with nanocarriers like enhanced efficacy, improvement in bioavailability, controlled drug release and ability to target the desired infectious pathogen have made these carriers successful.

CONCLUSION

Despite the number of strides taken in the field of topical drug delivery in infectious diseases, it still requires extensive research efforts to have a better perspective of the factors that influence drug permeation along with the mechanism of action with regard to skin penetration and deposition. The final objective of the therapy is to provide a safe and effective therapeutic approach for the management of infectious diseases affecting topical sites leading to enhanced therapeutic efficacy and patient-compliance.

Metabolic Rewiring Improves the Production of the Fungal Active Targeting Molecule Fusarinine C

Author: Recently, increasing research in siderophores has been dedicated to their possible medical applications in diagnostics and therapeutics for human pathogenic infections. Fusarinine C (FsC) is a natural hydroxamate siderophore that harbors three amino groups, which allow the easy chemical modification of FsC for the design of novel multifunctional conjugates. However, low production of FsC has hampered its extensive exploitation.Herein, we rewired the FsC biosynthetic pathway in the Aureobasidium melanogenum HN6.2 strain to achieve a self-supplying l-ornithine with component-simplified and enhanced production of extracellular siderophores, for which the FsC accounted for 94%, its final titer being approximately 1.7 g L^-1. The convenient acquisition of FsC effectuated our exploitation for its application. We employed in vitro and in vivo assays to show that FsC is an active targeting molecule that acts on the human pathogenic fungi Trichophyton rubrum and Candida albicans; this demonstrates the potential to use FsC for the development of novel antifungal targeting reagents in the future.

Thermoreversible Gel-Loaded Amphotericin B for the Treatment of Dermal and Vaginal Candidiasis

The present study was designed to develop a thermoreversible gel of Pluronic (P407) loaded amphotericin B (AmB-gel) for the dermal and vaginal treatment of candidiasis. P407 was used as a copolymer to exploit potential advantages related to increasing drug concentration in the tissue layer in order to provide a local effect. Parameters including internal structure, swelling, porosity, and short-term stability were determined. In addition, drug release profile and ex vivo skin and vaginal permeation studies were carried out. Antifungal efficacy was evaluated against strains of Candida spp. and atomic force microscopy (AFM) supported the results. The tolerance of AmB-gel was studied by evaluating biomechanical properties of skin and determining the irritation level in scarified rabbit skin supported by histological analysis. Results confirmed the development of a thermoreversible AmB-gel with high porosity exhibiting Newtonian behavior at 4 °C and pseudoplasticity at 32 °C as well as optimal stability for at least 90 days. The Amb-gel provided a sustained drug release following a Boltzmann sigmoidal model. Non permeation was observed in skin and vaginal mucosa, showing a high retained amount of AmB of 960.0 and 737.3 µg/g/cm², respectively. In vitro antifungal efficacy showed that AmB-gel was more effective than Free-AmB in inhibiting strains of Candida spp. and these results were corroborated by AFM. Finally, tolerance studies showed that its application did not induce skin irritation nor alter its biophysical properties. Together, these results confirmed that AmB-gel could be proposed as a promising candidate for the clinical status in the treatment of skin and vaginal candidiasis.

Development of sulconazole-loaded nanoemulsions for enhancement of transdermal permeation and antifungal activity

Background: Sulconazole (SCZ) is a broad-spectrum transdermally administered anti-fungicidal agent. However, the therapeutic effect of SCZ is generally limited by its poor water solubility. This present study aimed to develop and evaluate sulconazole-loaded nanoemulsions (SCZ-NEs) for enhancement of the transdermal permeation and antifungal activity. Methods: A spontaneous titration method was applied to prepare the SCZ-NEs. And the optimized formulation of SCZ-NEs was screened by central composite design (CCD). In addition, the characteristics of the SCZ-NEs were evaluated, including particle size, zeta potential, drug loading (DL%) and encapsulation efficiency (EE%). The morphology of SCZ-NEs was observed by transmission electron microscopy (TEM). Franz diffusion cells were used to evaluate the transdermal permeability of the SCZ-NEs. The antifungal activity of the SCZ-NEs was measured by a zone of inhibition (ZOI) test. Results: The optimized SCZ-NEs possessed a moderate particle size of 52.3±3.8 nm, zeta potential of 23.3±1.2 mV, DL% of 0.47±0.05% and EE% of 87.1±3.2%. The ex vivo skin permeation study verified that the cumulative permeability (Qn) and penetration rate (Js) of the optimized SCZ-NEs were about 1.7-fold higher than that of a commercial reference, miconazole (MCZ) cream and 3-fold higher than that of SCZ-DMSO solution. The optimized SCZ-NEs exhibited zone of inhibition (ZOI) values of 23.5±2.4 and 20.4±2.5 mm against C. albicans and T. rubrum, which were larger compared with these of the MCZ cream and SCZ-DMSO solution. Conclusion: SCZ-NEs were effectively developed to overcome the poor solubility of SCZ, promote SCZ permeation through the skin and improve its antifungal activity. Thus, the SCZ-NEs are a promising percutaneous administration for skin fungal infections induced by C. albicans and T. rubrum.

Nanoemulsion strategy of pioglitazone for the treatment of skin inflammatory diseases

Pioglitazone (PGZ) is a peroxisome proliferator-activated receptor agonist. Its role in the inflammatory response modulation paves the way for additional therapeutic applications. The purpose of this study was to develop a pioglitazone nanoemulsion (PGZ-NE) in order to investigate its anti-inflammatory efficacy on the skin. To that end, an NE vehicle developed for skin delivery was optimized and characterized. The resulting PGZ-NE showed good anti-inflammatory efficacy by decreasing the expression of inflammatory cytokines IL-6, IL-1β and TNF-α. The properties of the developed nanocarrier allowed achievement of a high permeation flux of PGZ through the skin as well as a high retained amount in the skin, likely due to the depot effect of ingredients, which assured a prolonged local action, with good skin tolerability among participating individuals. Consequently, these results suggest that PGZ-NE may be used as an alternative treatment for inflammatory skin diseases such as rosacea, atopic dermatitis or psoriasis.

Innovative nanocompounds for cutaneous administration of classical antifungal drugs: a systematic review

Nanomedicine manipulates materials at atomic, molecular, and supramolecular scale, with at least one dimension within the nanometer range, for biomedical applications. The resulting nanoparticles have been consistently shown beneficial effects for antifungal drugs delivery, overcoming the problems of low bioavailability and high toxicity of these drugs. Due to their unique features, namely the small mean particle size, nanoparticles contribute to the enhanced drug absorption and uptake by the target cells, potentiating the therapeutic drug effect. The topical route is desirable due to the adverse effects arising from oral administration. This review provides a comprehensive analysis of the use of nano compounds for the current treatment of topical fungal infections. A special emphasis is given to the employment of lipid nanoparticles, due to their recognized efficacy, versatility, and biocompatibility, attracting the major attention as novel topical nanocompounds used for the administration of antifungal drugs.

Biopharmaceutical profile of a clotrimazole nanoemulsion: Evaluation on skin and mucosae as anticandidal agent

Clotrimazole (CLT) was formulated in a nanoemulsion (NE) for the topical treatment of candidiasis consisting of 10% labrafac^® lipophile, 60% labrasol^®:capryol^® 90 mixture (ratio 4:1) and 30% propylene glycol. Physicochemical properties, stability, rheology, in vitro drug release, ex vivo drug permeation through human skin and porcine buccal, sublingual and vaginal mucosae, antifungal efficacy, as well as in vivo skin tolerance were evaluated. 1% CLT-NE (CLT-NE1) and 2% CLT-NE (CLT-NE2) exhibited 153 ± 17.25 and 186 ± 15.38 nm droplet sizes, low polydispersity indexes, negative zeta potentials and biocompatible pH values. The CLT-NEs exhibited typical Newtonian profiles with viscosities of 42.14 ± 0.037 mPa·s and 41.35 ± 0.041 mPa·s, respectively and higher extensibility properties than commercial counterparts retaining their physicochemical properties for 180 days. NEs provided a sustained release of drug according to the first order model. Similar skin permeation properties were observed between CLT-NE1 and commercial reference. However, significant higher CLT amounts retained in mucosae were provided by CLT-NE2 when compared with references. Antifungal efficacies were also higher than commercial references, and the in vivo tolerance study confirmed the suitability for topical application, making CLT-NEs a great tool for clinical investigation of topical candidiasis treatments.

Nanoemulsions and dermatological diseases: contributions and therapeutic advances

Skin disease is one of the most common human diseases and affects between 30% and 70% of individuals, which requires a lot of attention to their treatments. The delivery of active pharmacological ingredients at the topical level is a challenge because of the difficulties in overcoming the mechanical barrier created by the skin and reaching greater depths, since delivery specificities are decisive for the degree of effectiveness. In this way, the nanoemulsions emerge as a potential system for the incorporation of active substances in the cells and for the controlled release of active principles. The present article intends to review the main treatments for which the nanoemulsions were used in the field of dermatology. In addition, it discusses the results and advantages over the other dermatological therapies that are being used. The results showed that the particle size in nanoemulsions increased the contact surface area, resulting in increased drug efficacy, even in comparison with other existing pharmaceutical formulations. In conclusion, it has been shown that nanoemulsions have a better performance in efficacy, safety, permeability profile, and bioavailability compared with other formulations studied.

Comparative Study of Ex Vivo Transmucosal Permeation of Pioglitazone Nanoparticles for the Treatment of Alzheimer's Disease

Pioglitazone has been reported in the literature to have a substantial role in the improvement of overall cognition in a mouse model. With this in mind, the aim of this study was to determine the most efficacious route for the administration of Pioglitazone nanoparticles (PGZ-NPs) in order to promote drug delivery to the brain for the treatment of Alzheimer's disease. PGZ-loaded NPs were developed by the solvent displacement method. Parameters such as mean size, polydispersity index, zeta potential, encapsulation efficacy, rheological behavior, and short-term stability were evaluated. Ex vivo permeation studies were then carried out using buccal, sublingual, nasal, and intestinal mucosa. PGZ-NPs with a size around of 160 nm showed high permeability in all mucosae. However, the permeation and prediction parameters revealed that lag-time and vehicle/tissue partition coefficient of nasal mucosa were significantly lower than other studied mucosae, while the diffusion coefficient and theoretical steady-state plasma concentration of the drug were higher, providing biopharmaceutical results that reveal more favorable PGZ permeation through the nasal mucosa. The results suggest that nasal mucosa represents an attractive and non-invasive pathway for PGZ-NPs administration to the brain since the drug permeation was demonstrated to be more favorable in this tissue.

Recent advances in delivery of antifungal agents for therapeutic management of candidiasis

Candidiasis is a fungal infection caused by yeasts that belong to the genus Candida. There are over twenty species of Candida yeasts that can cause infection in humans, the most common of which is Candida albicans. Candida yeasts normally reside in the intestinal tract and can be found on mucous membranes and skin without causing infection; however, overgrowth of these organisms can cause symptoms to develop. Presence of other diseases that compromises the patient's immunity makes it more difficult to treat. Candidiasis is majorly divided into superficial infections (oral or vaginal) and systemic infections, also known as invasive candidiasis. The conventional therapeutic modalities used to treat candidiasis are associated with several side effects that limits the dose and dosing frequency. Development of novel drug delivery systems for reduction in dose and alleviation of side effects is an important strategy to improve the clinical efficacy and patient acceptability. This review gives a bird's eye view of the classification and current therapeutic regime of candidiasis. It presents the varied types of drug delivery systems that have been exploited for delivery of antifungal agents with measurable benefits. It also touches upon echinocandins a relatively new class of drugs that are amenable for translation into novel dosage forms with application against biofilm producing and fluconazole resistant strains contributing to a better therapeutic management of candidiasis.

Nanoemulsion as pharmaceutical carrier for dermal and transdermal drug delivery: Formulation development, stability issues, basic considerations and applications

The use of nanoemulsion in augmenting dermal and transdermal effectiveness of drugs has now well established. The development of nanoemulsion based semisolid dosage forms is an active area of present research. However, thickening or liquid-to-semisolid conversion of the nanoemulsions provides opportunities to the formulation scientist to explore novel means of solving instability issues during transformation. Extending knowledge about the explicit role of nature/magnitude of zeta potential, types of emulsifiers and selection of appropriate semisolid bases could place these versatile carriers from laboratory to industrial scale. This article reviews the progressive advancement in the delivery of medicament via nanoemulsion with special reference to the dermal and transdermal administration. It is attempted to explore the most suitable semi solid dosage form for the particular type of nanoemulsion (o/w, w/o and others) and effect of particle size and zeta potential on the delivery of drugs through dermal or transdermal route. Finally, this review also highlights the basic principles and fundamental considerations of nanoemulsion manufacture, application of nanoemulsion based semisolid dosage forms in the dermal/transdermal administration and basic considerations during the nanoemulsion absorption into and through skin.

Effect of Different Skin Penetration Promoters in Halobetasol Propionate Permeation and Retention in Human Skin

Halobetasol propionate (HB) is a potent synthetic corticosteroid used against inflammatory skin diseases, such as dermatitis, eczema, and psoriasis, among others. The aim of this study is to define how the presence of different skin penetration enhancers (nonane, menthone, limonene, azone, carene, decanol, linoleic acid and cetiol) affects the penetration and retention in skin of HB. To determine drug penetration through skin, 5% of each promoter was used in an ex vivo system with human skin on Franz cells. The results showed that the highest permeation occurs in the presence of menthone, followed by nonane. Permeation parameters were determined. The in vivo test was assessed, and the formulation containing HB-menthone presented better anti-inflammatory efficacy. These results are useful to generate a specific treatment according to each patient's needs, and the inflammatory characteristics of the disease.

Nanoparticles as safe and effective delivery systems of antifungal agents: Achievements and challenges

Invasive fungal infections are becoming a major health concern in several groups of patients leading to severe morbidity and mortality. Moreover, cutaneous fungal infections are a major cause of visits to outpatient dermatology clinics. Despite the availability of several effective agents in the antifungal drug arena, their therapeutic outcome is less than optimal due to limitations related to drug physicochemical properties and toxicity. For instance, poor aqueous solubility limits the formulation options and efficacy of several azole antifungal drugs while toxicity limits the benefits of many other drugs. Nanoparticles hold great promise to overcome these limitations due to their ability to enhance drug aqueous solubility, bioavailability and antifungal efficacy. Further, drug incorporation into nanoparticles could greatly reduce its toxicity. Despite these interesting nanoparticle features, there are only few marketed nanoparticle-based antifungal drug formulations. This review sheds light on different classes of nanoparticles used in antifungal drug delivery, such as lipid-based vesicles, polymeric micelles, solid lipid nanoparticles, nanostructured lipid carriers, nanoemulsions and dendrimers with emphasis on their advantages and limitations. Translation of these nanoformulations from the lab to the clinic could be facilitated by focusing the research on overcoming problems related to nanoparticle stability, drug loading and high cost of production and standardization.

Effect of chitosan coating on microemulsion for effective dermal clotrimazole delivery

Clotrimazole (CTZ) is a broad spectrum antimycotic agent known to be very effective locally for the treatment of fungal skin infections. The aim of this study was to study the effect of chitosan-coated microemulsion (CME) for topical delivery of CTZ and also evaluate its in vitro antifungal efficacy, ex vivo permeation and retention ability on the skin surface. The pseudo-ternary phase diagrams were developed using clove oil as oil phase, Tween 80 and propylene glycol as surfactant and co-surfactant, respectively, and distilled water as aqueous phase. CME was prepared by the drop wise addition of chitosan solution to the optimized microemulsion. Physicochemical parameters (globule size, zeta potential, drug content, viscosity and pH) and in vitro release of CME were studied. The in vitro antifungal efficacy of CME and ME was studied by cup-plate method against Candida albicans. Ex vivo drug permeation study was also carried out in a modified diffusion cell, using rat skin. The developed CME displayed an average globule size less than 50 nm and a positive surface charge, acceptable physico-chemical behavior, and exhibited sustained drug release in in vitro study. In in vitro anti-fungal study, CME showed greater values of zone of inhibition as compared to ME due to its prolonged action as well as fungistatic nature of chitosan. In ex vivo study, CME showed better retention and sustained permeation property than ME due to the mucoadhesive property of chitosan. These results suggest that positively charged CMEs could be used as novel topical formulation for its ability to retain on the skin and its ability to sustain the release of the drug.

Novel nanostructured supramolecular hydrogels for the topical delivery of anionic drugs

A bis-imidazolium-based amphiphilic molecule was used to form novel supramolecular gels in ethanol-water mixtures. The proportion of solvents, the concentration of gellant and the temperature are factors that strongly influence the gelling process. The physical gels that are formed comprise entangled fibers of around 100nm in diameter, able to incorporate anionic drugs, whose morphology varies depending on the drug they incorporate. These hydrogels are soft and therefore optimum for skin application. They show good stability when compared to previously reported gels. Suitable drug release and skin permeation profiles were obtained, and, moreover, they seem to promote the retention of the drug inside the skin. Finally, effective in vivo anti-inflammatory activity was observed, especially with the indomethacin-incorporated gel, which indicates that these supramolecular hydrogels are a good option for the delivery of poor water soluble drugs for the treatment of acute inflammation or other skin diseases.

Factorial design applied to the optimization of lipid composition of topical antiherpetic nanoemulsions containing isoflavone genistein

The aim of this study was to optimize topical nanoemulsions containing genistein, by means of a 23 full factorial design based on physicochemical properties and skin retention. The experimental arrangement was constructed using oil type (isopropyl myristate or castor oil), phospholipid type (distearoylphosphatidylcholine [DSPC] or dioleylphosphaditylcholine [DOPC]), and ionic cosurfactant type (oleic acid or oleylamine) as independent variables. The analysis of variance showed effect of third order for particle size, polydispersity index, and skin retention of genistein. Nanoemulsions composed of isopropyl myristate/DOPC/oleylamine showed the smallest diameter and highest genistein amount in porcine ear skin whereas the formulation composed of isopropyl myristate/DSPC/oleylamine exhibited the lowest polydispersity index. Thus, these two formulations were selected for further studies. The formulations presented positive ζ potential values (>25 mV) and genistein content close to 100% (at 1 mg/mL). The incorporation of genistein in nanoemulsions significantly increased the retention of this isoflavone in epidermis and dermis, especially when the formulation composed by isopropyl myristate/DOPC/oleylamine was used. These results were supported by confocal images. Such formulations exhibited antiherpetic activity in vitro against herpes simplex virus 1 (strain KOS) and herpes simplex virus 22 (strain 333). Taken together, the results show that the genistein-loaded nanoemulsions developed in this study are promising options in herpes treatment.