Plastid targeting strategies for cyanophycin synthetase to achieve high-level polymer accumulation in Nicotiana tabacum

Cyanophycin and its biosynthesis: not hot but very cool

Covering: 1878 to early 2023Cyanophycin is a biopolymer consisting of a poly-aspartate backbone with arginines linked to each Asp sidechain through isopeptide bonds. Cyanophycin is made by cyanophycin synthetase 1 or 2 through ATP-dependent polymerization of Asp and Arg, or β-Asp-Arg, respectively. It is degraded into dipeptides by exo-cyanophycinases, and these dipeptides are hydrolyzed into free amino acids by general or dedicated isodipeptidase enzymes. When synthesized, chains of cyanophycin coalesce into large, inert, membrane-less granules. Although discovered in cyanobacteria, cyanophycin is made by species throughout the bacterial kingdom, and cyanophycin metabolism provides advantages for toxic bloom forming algae and some human pathogens. Some bacteria have developed dedicated schemes for cyanophycin accumulation and use, which include fine temporal and spatial regulation. Cyanophycin has also been heterologously produced in a variety of host organisms to a remarkable level, over 50% of the host's dry mass, and has potential for a variety of green industrial applications. In this review, we summarize the progression of cyanophycin research, with an emphasis on recent structural studies of enzymes in the cyanophycin biosynthetic pathway. These include several unexpected revelations that show cyanophycin synthetase to be a very cool, multi-functional macromolecular machine.

Sustainable Production of the Cyanophycin Biopolymer in Tobacco in the Greenhouse and Field

The production of biodegradable polymers as coproducts of other commercially relevant plant components can be a sustainable strategy to decrease the carbon footprint and increase the commercial value of a plant. The biodegradable polymer cyanophycin granular polypeptide (CGP) was expressed in the leaves of a commercial tobacco variety, whose seeds can serve as a source for biofuel and feed. In T0 generation in the greenhouse, up to 11% of the leaf dry weight corresponded to the CGP. In T1 generation, the maximum content decreased to approximately 4% dw, both in the greenhouse and first field trial. In the field, a maximum harvest of 4 g CGP/plant could be obtained. Independent of the CGP content, most transgenic plants exhibited a slight yield penalty in the leaf biomass, especially under stress conditions in greenhouse and field trials. After the harvest, the leaves were either Sun dried or ensiled. The resulting material was used to evaluate the extraction of CGP compared to that in the laboratory protocol. The farm-level analysis indicates that the extraction of CGP from tobacco plants can provide alternative income opportunities for tobacco farmers. The CGP yield/ha indicates that the CGP production in plants can be economically feasible depending on the cultivation and extraction costs. Moreover, we analyzed the consumer acceptance of potential applications associated with GM tobacco in four European countries (Germany, Finland, Italy and the Netherlands) and found unexpectedly high acceptance.

Structures and function of the amino acid polymerase cyanophycin synthetase

Cyanophycin is a natural biopolymer produced by a wide range of bacteria, consisting of a chain of poly-L-Asp residues with L-Arg residues attached to the β-carboxylate sidechains by isopeptide bonds. Cyanophycin is synthesized from ATP, aspartic acid and arginine by a homooligomeric enzyme called cyanophycin synthetase (CphA1). CphA1 has domains that are homologous to glutathione synthetases and muramyl ligases, but no other structural information has been available. Here, we present cryo-electron microscopy and X-ray crystallography structures of cyanophycin synthetases from three different bacteria, including cocomplex structures of CphA1 with ATP and cyanophycin polymer analogs at 2.6 Å resolution. These structures reveal two distinct tetrameric architectures, show the configuration of active sites and polymer-binding regions, indicate dynamic conformational changes and afford insight into catalytic mechanism. Accompanying biochemical interrogation of substrate binding sites, catalytic centers and oligomerization interfaces combine with the structures to provide a holistic understanding of cyanophycin biosynthesis.

Characterization of an efficient extracellular cyanophycinase and its encoding cphEStrept. gene from Streptomyces pratensis strain YSM

Until now, no enzymes were described that hydrolyze cyanophycin granular protein (CGP) from a species of the genus Streptomyces. An isolate able to hydrolyze CGP was identified as Streptomyces pratensis strain YSM. The CGPase from S. pratensis strain YSM had an optimum activity at 42 °C and pH 8.5, and was able to degrade CGP at a rate of 12 ± 0.3 μg/mL min. Additionally, this CGPase hydrolyzes water-soluble CGP significantly faster than water-insoluble CGP. The molecular mass of CGPase subunits from S. pratensis strain YSM as determined by SDS-PAGE was about 43 kDa, and the enzyme was entirely inhibited by serine-protease inhibitors. The CGPase coding gene (cphE_Strept.) was amplified from genomic DNA using primers designed form consensus sequence of putative CGPase sequences. The cphE_Strept. was 1427 bp encoding a CGPase of 420 amino acids that showed about 44% and 22% similarities to CGPase from Pseudomonas anguilliseptica BI and Synechocystis sp. PCC 6803, respectively. The catalytic triad and serine-protease residues (GXSXG) were identified in the CphE_Strept. sequence. Dipeptides and tetrapeptides were identified as hydrolysis products. Biotechnological exploitation of S. pratensis strain YSM for CGPase production might have an advantage due to the reduction of separation costs and its ability to degrade CGP in phosphate buffer saline using actively growing or resting cells.

Direct Delivery of Health Promoting β-Asp-Arg Dipeptides via Stable Co-expression of Cyanophycin and the Cyanophycinase CphE241 in Tobacco Plants

Feed supplementation with β-arginine-aspartate dipeptides (β-Asp-Arg DP) shows growth promoting effects in feeding trials with fish and might also be beneficial for pig and poultry farming. Currently, these DPs are generated from purified cyanophycin (CGP), with the help of the CGP-degrading enzyme cyanophycinase (CGPase). As alternative to an in vitro production, the DPs might be directly produced in feed crops. We already demonstrated that CGP can be produced in plastids of tobacco and potato, yielding up to 9.4% of the dry weight (DW). We also transiently co-expressed CGPases in the cytosol without degrading CGP in intact cells, while degradation occurs in the homogenized plant tissue. However, transient co-expression is not feasible for field-grown CGP plants, which is necessary for bulk production. In the present study, we proved that stable co-expression of the CGPase CphE241 in CGP-producing tobacco is sufficient to degrade 2.0% CGP/DW nearly completely within 3 h after homogenization of the leaves. In intact senescing leaves, CGP is partially released to the cytosol and degraded into DPs which limits the overall accumulation of CGP but not the level of the stable DPs. Even after 48 h, 54 μmol β-Asp-Arg DP/g DW could be detected in the extract, which correspond to 1.5% DP/DW and represents 84% of the expected amount. Thus, we developed a system for the production of β-Asp-Arg DP in field-grown plants.

Strategy for the Biosynthesis of Short Oligopeptides: Green and Sustainable Chemistry

Short oligopeptides are some of the most promising and functionally important amide bond-containing components, with widespread applications. Biosynthesis of these oligopeptides may potentially become the ultimate strategy because it has better cost efficiency and environmental-friendliness than conventional solid phase peptide synthesis and chemo-enzymatic synthesis. To successfully apply this strategy for the biosynthesis of structurally diverse amide bond-containing components, the identification and selection of specific biocatalysts is extremely important. Given that perspective, this review focuses on the current knowledge about the typical enzymes that might be potentially used for the synthesis of short oligopeptides. Moreover, novel enzymatic methods of producing desired peptides via metabolic engineering are highlighted. It is believed that this review will be helpful for technological innovation in the production of desired peptides.

Re-evaluation of cyanophycin synthesis in Corynebacterium glutamicum and incorporation of glutamic acid and lysine into the polymer

Corynebacterium glutamicum was only examined in the early 2000s as a possible microorganism for the production of the polyamide cyanophycin (multi-L-arginyl-poly-[L-aspartic acid], CGP). CGP is a potential precursor for the synthesis of polyaspartic acid and CGP-derived dipeptides which may be of use in peptide-based clinical diets, as dietary supplements, or in livestock feeds. In the past, C. glutamicum was disregarded for CGP production due to low CGP contents and difficulties in isolating the polymer. However, considering recent advances in CGP research, the capabilities of this organism were revisited. In this study, several cyanophycin synthetases (CphA) as well as expression vectors and cultivation conditions were evaluated. The ability of C. glutamicum to incorporate additional amino acids such as lysine and glutamic acid was also examined. The strains C. glutamicum pVWEx1::cphA_Δ1 and C. glutamicum pVWEx1::cphA_BP1 accumulated up to 14% of their dry weight CGP, including soluble CGP containing more than 40 mol% of the alternative side-chain amino acid lysine. The soluble, lysine-rich form of the polymer was not detected in C. glutamicum in previous studies. Additionally, an incorporation of up to 6 mol% of glutamic acid into the backbone of CGP synthesized by C. glutamicum pVWEx1::cphA_Dh was detected. The strain accumulated up to 17% of its dry weight in soluble CGP. Although glutamic acid had previously been found to replace arginine in the side chain, this is the first time that glutamic acid was found to substitute aspartic acid in the backbone.

Reprint of "Fast and sensitive in vivo studies under controlled environmental conditions to substitute long-term field trials with genetically modified plants"

We introduce an easy, fast and effective method to analyze the influence of genetically modified (GM) plants on soil and model organisms in the laboratory to substitute laborious and time consuming field trials. For the studies described here we focused on two GM plants of the so-called 3rd generation: GM plants producing pharmaceuticals (PMP) and plant made industrials (PMI). Cyanophycin synthetase (cphA) was chosen as model for PMI and Choleratoxin B (CTB) as model for PMP. The model genes are expressed in transgenic roots of composite Vicia hirsuta plants grown in petri dishes for semi-sterile growth or small containers filled with non-sterile soil. No significant influence of the model gene expression on root induction, growth, biomass, interaction with symbionts such as rhizobia (number, size and functionality of nodules, selection of nodulating strains) or arbuscular mycorrhizal fungi could be detected. In vitro, but not in situ under field conditions, structural diversity of the bulk soil microbial community between transgenic and non-transgenic cultivars was determined by PLFA pattern-derived ratios of bacteria: fungi and of gram⁺: gram^- bacteria. Significant differences in PLFA ratios were associated with dissimilarities in the quantity and molecular composition of rhizodeposits as revealed by Py-FIMS analyses. Contrary to field trials, where small effects based on the transgene expression might be hidden by the immense influence of various environmental factors, our in vitro system can detect even minor effects and correlates them to transgene expression with less space, time and labour.

Expression of CphB- and CphE-type cyanophycinases in cyanophycin-producing tobacco and comparison of their ability to degrade cyanophycin in plant and plant extracts

Increasing the arginine (Arg) content in plants used as feed or food is of interest, since the supplementation of food with conditionally essential Arg has been shown to have nutritional benefits. An increase was achieved by the expression of the Arg-rich bacterial storage component, cyanophycin (CGP), in the chloroplast of transgenic plants. CGP is stable in plants and its degradation into β-aspartic acid (Asp)-Arg dipeptides, is solely catalyzed by bacterial cyanophycinases (CGPase). Dipeptides can be absorbed by animals even more efficiently than free amino acids (Matthews and Adibi 1976; Wenzel et al. 2001). The simultaneous production of CGP and CGPase in plants could be a source of β-Asp-Arg dipeptides if CGP degradation can be prevented in planta or if dipeptides are stable in the plants. We have shown for the first time that it is possible to co-express CGP and CGPase in the same plant without substrate degradation in planta by transient expression of the cyanobacterial CGPase CPHB (either in the plastid or cytosol), and the non-cyanobacterial CGPase CPHE (cytosol) in CGP-producing Nicotiana tabacum plants. We compared their ability to degrade CGP in planta and in crude plant extracts. No CGP degradation appeared prior to cell homogenization independent of the CGPase produced. In crude plant extracts, only cytosolic CPHE led to a fast degradation of CGP. CPHE also showed higher stability and in vitro activity compared to both CPHB variants. This work is the next step to increase Arg in forage plants using a stable, Arg-rich storage protein.

Stable production of cyanophycinase in Nicotiana benthamiana and its functionality to hydrolyse cyanophycin in the murine intestine

Food supplementation with the conditionally essential amino acid arginine (Arg) has been shown to have nutritional benefits. Degradation of cyanophycin (CGP), a peptide polymer used for nitrogen storage by cyanobacteria, requires cyanophycinase (CGPase) and results in the release of β-aspartic acid (Asp)-Arg dipeptides. The simultaneous production of CGP and CGPase in plants could be a convenient source of Arg dipeptides. Different variants of the cphB coding region from Thermosynechococcus elongatus BP-1 were transiently expressed in Nicotiana benthamiana plants. Translation and enzyme stability were optimized to produce high amounts of active CGPase. Protein stability was increased by the translational fusion of CGPase to the green fluorescent protein (GFP) or to the transit peptide of the small subunit of RuBisCO for peptide production in the chloroplasts. Studies in mice showed that plant-expressed CGP fed in combination with plant-made CGPase was hydrolysed in the intestine, and high levels of ß-Asp-Arg dipeptides were found in plasma, demonstrating dipeptide absorption. However, the lack of an increase in Asp and Arg or its metabolite ornithine in plasma suggests that Arg from CGP was not bioavailable in this mouse group. Intestinal degradation of CGP by CGPase led to low intestinal CGP content 4 h after consumption, but after ingestion of CGP alone, high CGP concentrations remained in the large intestine; this indicated that intact CGP was transported from the small to the large intestine and that CGP was resistant to colonic microbes.

Cyanophycinase CphE from P. alcaligenes produced in different compartments of N. benthamiana degrades high amounts of cyanophycin in plant extracts

One of the major constraints in pig and poultry farming is the supply of protein-rich forage, containing sufficient amounts of key amino acids such as arginine (Ufaz and Galili 2008). Since these are underrepresented in plant proteins, the usage of plants as feed is limited. The heterologous production of the cyanobacterial storage polymer cyanophycin granule polypeptide (CGP) in plastids increases the amount of arginine substantially (Huhns et al. 2008; Huhns et al. 2009; Nausch et al. 2016a). CGP degradation releases arginine-aspartate dipeptides. CGP is stable in plants because its degradation is exclusively restricted to bacterial cyanophycinases (CGPases; Law et al. 2009). Since animals are also unable to digest CGP, CGPases need to be co-delivered with CGP-containing plant feed in order to release the dipeptides in the gastrointestinal tract of animals during digestion. Therefore, an extracellular CGPase, CphE from Pseudomonas alcaligenes DIP-1, was targeted to the cytosol, ER, and apoplasm of Nicotiana benthamiana. Translocation to the chloroplast was not successful. Although CphE accumulated in high amounts in the cytosol, only moderate levels were present in the ER, while the enzyme was nearly undetectable in the apoplasm. This correlates with the higher instability of post-translationally modified CphE in crude plant extracts. In addition, the production in the ER led to an increased number and size of necroses compared with cytosolic expression and might therefore interfere with the endogenous metabolism in the ER. Due to the high and robust enzyme activity, even moderate CphE concentrations were sufficient to degrade CGP in plant extracts.

Fast and sensitive in vivo studies under controlled environmental conditions to substitute long-term field trials with genetically modified plants

We introduce an easy, fast and effective method to analyze the influence of genetically modified (GM) plants on soil and model organisms in the laboratory to substitute laborious and time consuming field trials. For the studies described here we focused on two GM plants of the so-called 3rd generation: GM plants producing pharmaceuticals (PMP) and plant made industrials (PMI). Cyanophycin synthetase (cphA) was chosen as model for PMI and Choleratoxin B (CTB) as model for PMP. The model genes are expressed in transgenic roots of composite Vicia hirsuta plants grown in petri dishes for semi-sterile growth or small containers filled with non-sterile soil. No significant influence of the model gene expression on root induction, growth, biomass, interaction with symbionts such as rhizobia (number, size and functionality of nodules, selection of nodulating strains) or arbuscular mycorrhizal fungi could be detected. In vitro, but not in situ under field conditions, structural diversity of the bulk soil microbial community between transgenic and non-transgenic cultivars was determined by PLFA pattern-derived ratios of bacteria: fungi and of gram⁺: gram^- bacteria. Significant differences in PLFA ratios were associated with dissimilarities in the quantity and molecular composition of rhizodeposits as revealed by Py-FIMS analyses. Contrary to field trials, where small effects based on the transgene expression might be hidden by the immense influence of various environmental factors, our in vitro system can detect even minor effects and correlates them to transgene expression with less space, time and labour.

Tobacco as platform for a commercial production of cyanophycin

Cyanophycin (CP) is a proteinogenic polymer that can be substituted for petroleum in the production of plastic compounds and can also serve as a source of valuable dietary supplements. However, because there is no economically feasible system for large-scale industrial production, its application is limited. In order to develop a low-input system, CP-synthesis was established in the two commercial Nicotiana tabacum (N. tabacum) cultivars 'Badischer Geudertheimer' (BG) and 'Virginia Golta' (VG), by introducing the cyanophycin-synthetase gene from Thermosynecchococcus elongatus BP-1 (CphATe) either via crossbreeding with transgenic N. tabacum cv. Petit Havana SR1 (PH) T2 individual 51-3-2 or by agrobacterium-mediated transformation. Both in F1 hybrids (max. 9.4% CP/DW) and T0 transformants (max. 8.8% CP/DW), a substantial increase in CP content was achieved in leaf tissue, compared to a maximum of 1.7% CP/DW in PH T0 transformants of Hühns et al. (2008). In BG CP, yields were homogenous and there was no substantial difference in the variation of the CP content between primary transformants (T0), clones of T0 individuals, T1 siblings and F1 siblings of hybrids. Therefore, BG meets the requirements for establishing a master seed bank for continuous and reliable CP-production. In addition, it was shown that the polymer is not only stable in planta but also during silage, which simplifies storage of the harvest prior to isolation of CP.

Peculiarities and impacts of expression of bacterial cyanophycin synthetases in plants

Cyanophycin (CP) can be successfully produced in plants by the ectopic expression of the CphA synthetase from Thermosynechococcus elongatus BP-1 (Berg et al. 2000), yielding up to 6.8 % of dry weight (DW) in tobacco leaf tissue and 7.5 % in potato tubers (Huehns et al. 2008, 2009). Though, high amounts of the polymer lead to phenotypical abnormalities in both crops. The extension of abnormalities and the maximum amount of CP tolerated depend on the compartment that CP production is localized at the tissue/crop in which CP was produced (Huehns et al. 2008, 2009; Neumann et al. 2005). It cannot be ascribed to a depletion of arginine, lysine, or aspartate, the substrates for CP synthesis.

Features of the biotechnologically relevant polyamide family "cyanophycins" and their biosynthesis in prokaryotes and eukaryotes

Cyanophycin, inclusions in cyanobacteria discovered by the Italian scientist Borzi in 1887, were characterized as a polyamide consisting of aspartic acid and arginine. Its synthesis in cyanobacteria was analyzed regarding growth conditions, responsible gene product, requirements, polymer structure and properties. Heterologous expression of diverse cyanophycin synthetases (CphA) in Escherichia coli enabled further enzyme characterization. Cyanophycin is a polyamide with variable composition and physiochemical properties dependent on host and cultivation conditions in contrast to the extracellular polyamides poly-γ-glutamic acid and poly-ε-l-lysine. Furthermore, recombinant prokaryotes and transgenic eukaryotes, including plants expressing different cphA genes, were characterized as suitable for production of insoluble cyanophycin regarding higher yields and modified composition for other requirements and applications. In addition, cyanophycin was characterized as a source for the synthesis of polyaspartic acid or N-containing bulk chemicals and dipeptides upon chemical treatment or degradation by cyanophycinases, respectively. Moreover, water-soluble cyanophycin derivatives with altered amino acid composition were isolated from transgenic plants, yeasts and recombinant bacteria. Thereby, the range of dipeptides could be extended by biological processes and by chemical modification, thus increasing the range of applications for cyanophycin and its dipeptides, including agriculture, food supplementations, medical and cosmetic purposes, synthesis of the polyacrylate substitute poly(aspartic acid) and other applications.

Composite potato plants with transgenic roots on non-transgenic shoots: a model system for studying gene silencing in roots

Composite potato plants offer an extremely fast, effective and reliable system for studies on gene functions in roots using antisense or inverted-repeat but not sense constructs for gene inactivation. Composite plants, with transgenic roots on a non-transgenic shoot, can be obtained by shoot explant transformation with Agrobacterium rhizogenes. The aim of this study was to generate composite potato plants (Solanum tuberosum) to be used as a model system in future studies on root-pathogen interactions and gene silencing in the roots. The proportion of transgenic roots among the roots induced was high (80-100%) in the four potato cultivars tested (Albatros, Desirée, Sabina and Saturna). No wild-type adventitious roots were formed at mock inoculation site. All strains of A. rhizogenes tested induced phenotypically normal roots which, however, showed a reduced response to cytokinin as compared with non-transgenic roots. Nevertheless, both types of roots were infected to a similar high rate with the zoospores of Spongospora subterranea, a soilborne potato pathogen. The transgenic roots of composite potato plants expressed significantly higher amounts of β-glucuronidase (GUS) than the roots of a GUS-transgenic potato line event. Silencing of the uidA transgene (GUS) was tested by inducing roots on the GUS-transgenic cv. Albatros event with strains of A. rhizogenes over-expressing either the uidA sense or antisense transcripts, or inverted-repeat or hairpin uidA RNA. The three last mentioned constructs caused 2.5-4.0 fold reduction in the uidA mRNA expression. In contrast, over-expression of uidA resulted in over 3-fold increase in the uidA mRNA and GUS expression, indicating that sense-mediated silencing (co-suppression) was not functional in roots. The results suggest that composite plants offer a useful experimental system for potato research, which has gained little previous attention.

High-level transient expression of ER-targeted human interleukin 6 in Nicotiana benthamiana

Tobacco plants can be used to express recombinant proteins that cannot be produced in a soluble and active form using traditional platforms such as Escherichia coli. We therefore expressed the human glycoprotein interleukin 6 (IL6) in two commercial tobacco cultivars (Nicotiana tabacum cv. Virginia and cv. Geudertheimer) as well as the model host N. benthamiana to compare different transformation strategies (stable vs. transient expression) and subcellular targeting (apoplast, endoplasmic reticulum (ER) and vacuole). In T(0) transgenic plants, the highest expression levels were achieved by ER targeting but the overall yields of IL6 were still low in the leaves (0.005% TSP in the ER, 0.0008% in the vacuole and 0.0005% in the apoplast). The apoplast variant accumulated to similar levels in leaves and seeds, whereas the ER-targeted variant was 1.2-fold more abundant in seeds and the vacuolar variant was 6-fold more abundant in seeds. The yields improved in subsequent generations, with the best-performing T(2) plants producing the ER-targeted IL6 at 0.14% TSP in both leaves and seeds. Transient expression of ER-targeted IL6 in leaves using the MagnICON system resulted in yields of up to 7% TSP in N. benthamiana, but only 1% in N. tabacum cv. Virginia and 0.5% in cv. Geudertheimer. Although the commercial tobacco cultivars produced up to threefold more biomass than N. benthamiana, this was not enough to compensate for the lower overall yields. The recombinant IL6 produced by transient and stable expression in plants was biologically active and presented as two alternative bands matching the corresponding native protein.

Plastid genetic engineering in Solanaceae

Plastid genetic engineering has come of age, becoming today an attractive alternative approach for the expression of foreign genes, as it offers several advantages over nuclear transformants. Significant progress has been made in plastid genetic engineering in tobacco and other Solanaceae plants, through the use of improved regeneration procedures and transformation vectors with efficient promoters and untranslated regions. Many genes encoding for industrially important proteins and vaccines, as well as genes conferring important agronomic traits, have been stably integrated and expressed in the plastid genome. Despite these advances, it remains a challenge to achieve marked levels of plastid transgene expression in non-green tissues. In this review, we summarize the basic requirements of plastid genetic engineering and discuss the current status, limitations, and the potential of plastid transformation for expanding future studies relating to Solanaceae plants.

Isolation of cyanophycin from tobacco and potato plants with constitutive plastidic cphATe gene expression

A chimeric cyanophycin synthetase gene composed of the cphATe coding region from the cyanobacterium Thermosynechococcus elongatus BP-1, the constitutive 35S promoter and the plastid targeting sequence of the integral photosystem II protein PsbY was transferred to the tobacco variety Petit Havanna SRI and the commercial potato starch production variety Albatros. The resulting constitutive expression of cyanophycin synthetase leads to polymer contents in potato leaf chloroplasts of up to 35 mg/g dry weight and in tuber amyloplasts of up to 9 mg/g dry weight. Both transgenic tobacco and potato were used for the development of isolation methods applicable for large-scale extraction of the polymer. Two different procedures were developed which yielded polymer samples of 80 and 90% purity, respectively.

Establishment of cyanophycin biosynthesis in Pichia pastoris and optimization by use of engineered cyanophycin synthetases

Two strains of the methylotrophic yeast Pichia pastoris were used to establish cyanophycin (multi-L-arginyl-poly-L-aspartic acid [CGP]) synthesis and to explore the applicability of this industrially widely used microorganism for the production of this polyamide. Therefore, the CGP synthetase gene from the cyanobacterium Synechocystis sp. strain PCC 6308 (cphA(6308)) was expressed under the control of the alcohol oxidase 1 promoter, yielding CGP contents of up to 10.4% (wt/wt), with the main fraction consisting of the soluble form of the polymer. To increase the polymer contents and to obtain further insights into the structural or catalytic properties of the enzyme, site-directed mutagenesis was applied to cphA(6308) and the mutated gene products were analyzed after expression in P. pastoris and Escherichia coli, respectively. CphA(6308)Delta1, which was truncated by one amino acid at the C terminus; point mutated CphA(6308)C595S; and the combined double-mutant CphA(6308)Delta1C595S protein were purified. They exhibited up to 2.5-fold higher enzyme activities of 4.95 U/mg, 3.20 U/mg, and 4.17 U/mg, respectively, than wild-type CphA(6308) (2.01 U/mg). On the other hand, CphA proteins truncated by two (CphA(6308)Delta2) or three (CphA(6308)Delta3) amino acids at the C terminus showed similar or reduced CphA enzyme activity in comparison to CphA(6308). In flask experiments, a maximum of 14.3% (wt/wt) CGP was detected after the expression of CphA(6308)Delta1 in P. pastoris. For stabilization of the expression plasmid, the his4 gene from Saccharomyces cerevisiae was cloned into the expression vector used and the constructs were transferred to histidine auxotrophic P. pastoris strain GS115. Parallel fermentations at a one-to-one scale revealed 26 degrees C and 6.0 as the optimal temperature and pH, respectively, for CGP synthesis. After optimization of fermentation parameters, medium composition, and the length of the cultivation period, CGP contents could be increased from 3.2 to 13.0% (wt/wt) in cells of P. pastoris GS115 expressing CphA(6308) and up to even 23.3% (wt/wt) in cells of P. pastoris GS115 expressing CphA(6308)Delta1.

Tuber-specific cphA expression to enhance cyanophycin production in potatoes

The production of biodegradable polymers that can be used to substitute petrochemical compounds in commercial products in transgenic plants is an important challenge for plant biotechnology. Nevertheless, it is often accompanied by reduced plant fitness. To decrease the phenotypic abnormalities of the sprout and to increase polymer production, we restricted cyanophycin accumulation to the potato tubers by using the cyanophycin synthetase gene (cphA(Te)) from Thermosynechococcus elongatus BP-1, which is under the control of the tuber-specific class 1 promoter (B33). Tuber-specific cytosolic (pB33-cphA(Te)) as well as tuber-specific plastidic (pB33-PsbY-cphA(Te)) expression resulted in significant polymer accumulation solely in the tubers. In plants transformed with pB33-cphA(Te), both cyanophycin synthetase and cyanophycin were detected in the cytoplasm leading to an increase up to 2.3% cyanophycin of dry weight and resulting in small and deformed tubers. In B33-PsbY-cphA(Te) tubers, cyanophycin synthetase and cyanophycin were exclusively found in amyloplasts leading to a cyanophycin accumulation up to 7.5% of dry weight. These tubers were normal in size, some clones showed reduced tuber yield and sometimes exhibited brown sunken staining starting at tubers navel. During a storage period over of 32 weeks of one selected clone, the cyanophycin content was stable in B33-PsbY-cphA(Te) tubers but the stress symptoms increased. However, all tubers were able to germinate. Nitrogen fertilization in the greenhouse led not to an increased cyanophycin yield, slightly reduced protein content, decreased starch content, and changes in the amounts of bound and free arginine and aspartate, as compared with control tubers were observed.

Establishment of a simple and effective isolation method for cyanophycin from recombinant Saccharomyces cerevisiae

An efficient, time-saving, and cost-effective method for isolation of the polyamide cyanophycin from recombinant Saccharomyces cerevisiae was established. Due to its simple procedure, this isolation method may be also applicable at industrial scale and also to other intracellular compounds in this yeast. Production of cyanophycin gained preferential interest in the past, as degradation products thereof are of pharmaceutical and technical interest. Recently, it was shown that Saccharomyces cerevisiae represents a putative candidate for cyanophycin synthesis at industrial scale. For identification of optimal isolation procedures, several parameters such as heat stress, freeze drying, and freeze/thaw cycles of transgenic yeast cells were compared for their effectiveness of cyanophycin isolation. Additionally, optimal resuspension solutions for the applied cells and minimal required materials or chemicals were determined to make the process most environmentally and economically friendly. Maximal cyanophycin granule polypeptide yields of 21% (w/w) were obtained after incubation of dry cells at 70 degrees C or 80 degrees C and precipitation of the polymer with two volumes of ethanol.

Pea-derived vaccines demonstrate high immunogenicity and protection in rabbits against rabbit haemorrhagic disease virus

Vaccines against rabbit haemorrhagic disease virus (RHDV) are commercially produced in experimentally infected rabbits. A genetically engineered and manufactured version of the major structural protein of RHDV (VP60) is considered to be an alternative approach for vaccine production. Plants have the potential to become an excellent recombinant production system, but the low expression level and insufficient immunogenic potency of plant-derived VP60 still hamper its practical use. In this study, we analysed the expression of a novel multimeric VP60-based antigen in four different plant species, including Nicotiana tabacum L., Solanum tuberosum L., Brassica napus L. and Pisum sativum L. Significant differences were detected in the expression patterns of the novel fusion antigen cholera toxin B subunit (CTB)::VP60 (ctbvp60(SEKDEL)) at the mRNA and protein levels. Pentameric CTB::VP60 molecules were only detected in N. tabacum and P. sativum, and displayed equal levels of CTB, at approximately 0.01% of total soluble protein (TSP), and traces of detectable VP60. However, strong enhancement of the CTB protein content via self-fertilization was only observed in P. sativum, where it reached up to 0.7% of TSP. In rabbits, a strong decrease in the protective vaccine dose required from 48-400 microg potato-derived VP60 [Castanon, S., Marin, M.S., Martin-Alonso, J.M., Boga, J.A., Casais, R., Humara, J.M., Ordas, R.J. and Parra, F. (1999) Immunization with potato plants expressing VP60 protein protects against rabbit hemorrhagic disease virus. J. Virol. 73, 4452-4455; Castanon, S., Martin-Alonso, J.M., Marin, M.S., Boga, J.A., Alonso, P., Parra, F. and Ordas, R.J. (2002) The effect of the promoter on expression of VP60 gene from rabbit hemorrhagic disease virus in potato plants. Plant Sci. 162, 87-95] to 0.56-0.28 microg antigenic VP60 (measured with VP60 enzyme-linked immunosorbent assay) of crude CTB::VP60 pea extracts was demonstrated. Rabbits immunized with pea-derived CTB::VP60 showed anti-VP60-specific antibodies, similar to RikaVacc((R))-immunized rabbits, and survived RHDV challenge.

Metabolic engineering of Saccharomyces cerevisiae for production of novel cyanophycins with an extended range of constituent amino acids

Cyanophycin (multi-l-arginyl-poly-l-aspartic acid; also known as cyanophycin grana peptide [CGP]) is a putative precursor for numerous biodegradable technically used chemicals. Therefore, the biosynthesis and production of the polymer in recombinant organisms is of special interest. The synthesis of cyanophycin derivatives consisting of a wider range of constituents would broaden the applications of this polymer. We applied recombinant Saccharomyces cerevisiae strains defective in arginine metabolism and expressing the cyanophycin synthetase of Synechocystis sp. strain PCC 6308 in order to synthesize CGP with citrulline and ornithine as constituents. Strains defective in arginine degradation (Car1 and Car2) accumulated up to 4% (wt/wt) CGP, whereas strains defective in arginine synthesis (Arg1, Arg3, and Arg4) accumulated up to 15.3% (wt/wt) of CGP, which is more than twofold higher than the previously content reported in yeast and the highest content ever reported in eukaryotes. Characterization of the isolated polymers by different analytical methods indicated that CGP synthesized by strain Arg1 (with argininosuccinate synthetase deleted) consisted of up to 20 mol% of citrulline, whereas CGP from strain Arg3 (with ornithine carbamoyltransferase deleted) consisted of up to 8 mol% of ornithine, and CGP isolated from strain Arg4 (with argininosuccinate lyase deleted) consisted of up to 16 mol% lysine. Cultivation experiments indicated that the incorporation of citrulline or ornithine is enhanced by the addition of low amounts of arginine (2 mM) and also by the addition of ornithine or citrulline (10 to 40 mM), respectively, to the medium.