Inhibition of green algae growth by corrole-based photosensitizers

Fӧrster resonance energy transfer (FRET) between CdSe quantum dots and ABA phosphorus(V) corroles

In this article, highly fluorescent phosphorus(V) corrole was synthesised which was then combined with CdSe quantum dots (QDs) in order to study Förster resonance energy transfer (FRET) mechanism between CdSe QDs (donor) and phosphorus corrole (acceptor). Spectral overlap between QD's emission profile and corrole's absorption profile was found to be significant enough to result into Förster resonance energy transfer (FRET). The UV-vis spectrum experienced increase in the absorption bands on addition of phosphorus corrole to CdSe QDs suggesting QD-corrole conjugation. In the steady state fluorescence measurements, emission spectrum observed quenching in the fluorescence intensity of prepared CdSe QDs on addition of phosphorus corrole. Likewise, in case of time-resolved fluorescence measurements it was noticed that the CdSe QD's lifetime was greatly quenched by the presence of a corrole acceptor. Stern-Volmer plot was made to show quenching in this case was dynamic in nature. Based on the results of UV-vis, steady state and time-resolved fluorescence measurements the plausible mechanism behind such observations is considered to be FRET.

Hallmarks of anticancer and antimicrobial activities of corroles

Corroles provide a remarkable opportunity for the development of cancer theranostic agents among other porphyrinoids. While most transition metal corrole complexes are only therapeutic, post-transition metallocorroles also find their applications in bioimaging. Moreover, corroles exhibit excellent photo-physicochemical properties, which can be harnessed for antitumor and antimicrobial interventions. Nevertheless, these intriguing, yet distinct properties of corroles, have not attained sufficient momentum in cancer research. The current review provides a comprehensive summary of various cancer-relevant features of corroles ranging from their structural and photophysical properties, chelation, protein/corrole interactions, to DNA intercalation. Another aspect of the paper deals with the studies of corroles conducted in vitro and in vivo with an emphasis on medical imaging (optical and magnetic resonance), photo/sonodynamic therapies, and photodynamic inactivation. Special attention is also given to a most recent finding that shows the development of pH-responsive phosphorus corrole as a potent antitumor drug for organelle selective antitumor cytotoxicity in preclinical studies. Another biomedical application of corroles is also highlighted, signifying the application of water-soluble and completely lipophilic corroles in the photodynamic inactivation of microorganisms. We strongly believe that future studies will offer a greater possibility of utilizing advanced corroles for selective tumor targeting and antitumor cytotoxicity. In the line with future developments, an ideal pipeline is envisioned on grounds of cancer targeting nanoparticle systems upon decoration with tumor-specific ligands. Hence, we envision that a bright future lies ahead of corrole anticancer research and therapeutics.

Inactivation of algae by visible-light-driven modified photocatalysts: A review

Harmful algal blooms have raised great concerns due to their adverse effects on aquatic ecosystems and human health. Recently, visible light-driven (VLD) photocatalysis has attracted attention for algae inactivation owing to its unique characteristics of low cost, mechanical stability, and excellent removal efficiency. However, the low utilization of visible light and the high complexation rate of electron-hole (e^--h⁺) pairs are essential drawbacks of conventional photocatalysts. Scientific efforts have been devoted to modifying VLD photocatalysts to enhance their antialgal activity. This review concisely summarizes the anti-algae performance of the latest modified VLD photocatalysts. The summary of the mechanisms in VLD photocatalytic inactivation demonstrates that reactive oxygen species (ROS) can induce oxidative damage to algal cells and photocatalytic degradation of released organic matter. In addition, the factors, such as photocatalyst dosage, algal concentration and species, and the physicochemical properties of different water matrices, such as pH, natural organic matter, and inorganic ions, affecting the efficacy of VLD catalytic oxidation for algae removal are briefly outlined. Thereafter, this review compiles perspectives on the emerging field of VLD photocatalytic inactivation.

Corroles at work: a small macrocycle for great applications

Corrole chemistry has witnessed an impressive boost in studies in the last 20 years, thanks to the possibility of preparing corrole derivatives by simple synthetic procedures. The investigation of a large number of corroles has highlighted some peculiar characteristics of these macrocycles, having features different from those of the parent porphyrins. With this progress in the elucidation of corrole properties, attention has been focused on the potential for the exploitation of corrole derivatives in different important application fields. In some areas, the potential of corroles has been studied in certain detail, for example, the use of corrole metal complexes as electrocatalysts for energy conversion. In some other areas, the field is still in its infancy, such as in the exploitation of corroles in solar cells. Herein, we report an overview of the different applications of corroles, focusing on the studies reported in the last five years.

Corroles: The Hitherto Elusive Parent Macrocycle and its Metal Complexes

Corroles, macrocycles that owe their name to the cobalt-chelating prosthetic group of vitamin B12 and share numerous features with the iron-chelating porphyrin present in heme proteins/enzymes, constantly cross new boundaries ever since stable derivatives became easily accessible. Particularly important is the increasing utilization of corroles and the corresponding metal complexes for the benefit of mankind, in terms of new drug candidates for treating various diseases and as catalysts for sustainable energy relevant processes. One challenge is to gain access to the plain macrocycle, as to allow for full elucidation of the most fundamental properties of corroles. We have obtained the substituent-free corrole by several surprising and conceptually different pathways. Selected features of the corresponding metal complexes are illuminated, for pointing towards unique phenomena that are anticipated to largely expand the horizon regarding their utilization for contemporary catalysis.

Methyl Potassium Siliconate and Siloxane Inhibit the Formation of Multispecies Biofilms on Ceramic Roof Tiles: Efficiency and Comparison of Two Common Water Repellents

Ceramic roof tiles are widespread marketed building materials, rapidly colonized by microorganisms that form multispecies biofilms on their surface and play crucial roles in biodeterioration processes. Coating tiles with water repellents is a pervasive industrial strategy employed to prevent liquid water penetration and slow biodeterioration. Very few studies have examined the links between the characteristics of water-repellent coatings and biofilm colonization patterns. Our work aims to compare the effects of coating tiles with two common water repellents (siliconate and siloxane) on the growth of colonizing microbes. We combined in situ exposure of tiles for over six years and macroscopic and microscopic observations with in vitro biotests, relying on the use of algal and fungal models. Our data showed that (1) tiles coated with water repellents were macroscopically less colonized by lichens (2) a significant fungal biofilm development at the microscopic scale (3) water repellents had very contrasting effects on our model strains. These data reinforce the great interest for industry to conduct more studies linking the nature of the water repellents with the composition of colonizing multispecies biofilms. The long-term objective is to improve the available water repellents and better adapt their selection to the nature of microbial colonization.

Moroccan actinobacteria with promising activity against toxic cyanobacteria Microcystis aeruginosa

In recent decades, harmful cyanobacterial blooms (HCBs) have become a severe hazard for human health mainly in drinking water resources and are responsible for serious ecological disturbances in freshwater ecosystems. The present study aims to explore the potential of actinobacteria isolated from sediment samples collected from Moroccan salt river to control HCBs mainly through Microcystis aeruginosa lysis. In order to investigate the possible anti-cyanobacterial response mechanisms, the antioxidant enzyme activities of M. aeruginosa cells were analysed. Anti-cyanobacterial activity was tested using the agar cylinder method against the toxic cyanobacteria Microcystis aeruginosa. Amongst the twenty-three isolates tested, only one showed promising anti-cyanobacterial activities with inhibition zone (ZI) equal to 22.00 mm, minimum inhibitory concentration (MIC) equal to 19.53 mg/L and minimum bactericidal concentration MBC equal to 39.06 mg/L. Phylogenetic analysis of the near-complete 16S rRNA gene sequence indicated that the strain DS1R1 belongs to the genus Streptomyces and has the highest similarity (100%) to Streptomyces sp. Indeed, M. aeruginosa growth, chlorophyll-a and protein content were significantly reduced by Streptomyces sp. DS1R1 extract. Superoxide dismutase (SOD), catalase (CAT) and malondialdehyde (MDA) were significantly elevated after treatment with Streptomyces sp. DS1R1 extract. These experimental findings provided insights in the development of a new eco-friendly procedure based on the use of actinobacteria for toxic cyanobacterial bloom bio-control.

Seaweed Essential Oils as a New Source of Bioactive Compounds for Cyanobacteria Growth Control: Innovative Ecological Biocontrol Approach

The application of natural compounds extracted from seaweeds is a promising eco-friendly alternative solution for harmful algae control in aquatic ecosystems. In the present study, the anti-cyanobacterial activity of three Moroccan marine macroalgae essential oils (EOs) was tested and evaluated on unicellular Microcystis aeruginosa cyanobacterium. Additionally, the possible anti-cyanobacterial response mechanisms were investigated by analyzing the antioxidant enzyme activities of M. aeruginosa cells. The results of EOs GC-MS analyses revealed a complex chemical composition, allowing the identification of 91 constituents. Palmitic acid, palmitoleic acid, and eicosapentaenoic acid were the most predominant compounds in Cystoseira tamariscifolia, Sargassum muticum, and Ulva lactuca EOs, respectively. The highest anti-cyanobacterial activity was recorded for Cystoseira tamariscifolia EO (ZI = 46.33 mm, MIC = 7.81 μg mL-1, and MBC = 15.62 μg mL-1). The growth, chlorophyll-a and protein content of the tested cyanobacteria were significantly reduced by C. tamariscifolia EO at both used concentrations (inhibition rate >67% during the 6 days test period in liquid media). Furthermore, oxidative stress caused by C. tamariscifolia EO on cyanobacterium cells showed an increase of the activities of superoxide dismutase (SOD) and catalase (CAT), and malondialdehyde (MDA) concentration was significantly elevated after 2 days of exposure. Overall, these experimental findings can open a promising new natural pathway based on the use of seaweed essential oils to the fight against potent toxic harmful cyanobacterial blooms (HCBs).

Harmful Cyanobacterial Blooms (HCBs): innovative green bioremediation process based on anti-cyanobacteria bioactive natural products

Over the last decades, Harmful Cyanobacterial Blooms (HCBs) represent one of the most conspicuous hazards to human health in freshwater ecosystems, due to the uses of the water for drinking, recreation and aquaculture. Cyanobacteria are one of the main biological components in freshwater ecosystems and they may proliferate in nutrients rich ecosystems causing severe impacts at different levels. Therefore, several methods have been applied to control cyanobacterial proliferation, including physical, chemical and biological strategies. However, the application of those methods is generally not very efficient. Research on an eco-friendly alternative leading to the isolation of new bioactive compounds with strong impacts against harmful cyanobacteria is a need in the field of water environment protection. Thus, this paper aims to give an overview of harmful cyanobacterial blooms and reviews the state of the art of studying the activities of biological compounds obtained from plants, seaweeds and microorganisms in the cyanobacterial bloom control.

Perimeter fractal dimension analysis of corrole islands on Au(111) at the solid-water interface

Corrole molecules deposited from aqueous solution on Au(111) arrange flat forming mesa-like clusters (islands), as evidenced by in situ scanning tunneling microscopy (STM). A morphology quantitative assessment of the entire image is given by STM data analysis, evaluating the islands’ fractal dimension as a whole. To this end, two methods are employed: the first exploits the power law that binds the perimeter and the area of all the islands; the second is simply a value of an appropriate average of the fractal dimensions of the islands. In fact the two methods return very close results.

Multielectron C–H photoactivation with an Sb(v) oxo corrole

An Sb(v) bis-μ-oxo corrole dimer performs photochemical multielectron C–H activation, oxidising toluene to benzaldehyde in a four-electron process.

Crossing the First Threshold: New Insights into the Influence of the Chemical Structure of Anionic Porphyrins on Plant Cell Wall Interactions and Photodynamic Cell Death Induction

In this study, our fundamental research interest was to understand how negatively charged porphyrins could interact with a plant cell wall and further act inside cells. Thus, three anionic porphyrins differing in their anionic external groups (carboxylates, sulfonates, and phosphonates) were tested. First, the tobacco cell wall was isolated to monitor in vitro its interactions with the three different anionic porphyrins. Unexpectedly, these negatively charged molecules were able to bind to the negatively charged cell wall probably by weak bonds such as hydrogen bonds and/or electrostatic interactions when the tetrapyrrolic core was protonated. Moreover, we showed that at the pH of spent culture medium (4.5), the neutrality of the carboxylated porphyrin (TPPC) facilitated its cell wall crossing while the diffusion of the two other sulfonated (TPPS) or phosphonated (TPPP) porphyrins that remained anionic was delayed. Once inside Tobacco Bright Yellow-2 (TBY-2) cells, TPPC induced higher levels of production of both H2O2 and malondialdehyde compared to TPPS after illumination. That result correlated well with strong cell death induction by photoactivated TPPC. Furthermore, reactive oxygen species-scavenging enzymes such as catalase, peroxidases, and superoxide dismutase were also strongly downmodulated in response to TPPC, while these enzymes were almost unchanged in response to photoactivated TPPS. To the best of our knowledge, this is the first study that took into account the whole story from interactions of porphyrins with a plant cell wall to their photodynamic activity inside the cells.

Corroles and corrole/transferrin nanoconjugates as candidates for sonodynamic therapy

We report corroles as good agents for utilizing the otherwise harmless sonication of aqueous solutions as a tool for creating highly cytotoxic singlet oxygen, and demonstrate cancer cell killing via this approach.

Antimicrobial activity and safety applications of meso-tetra(4-pyridyl)platinum(II) porphyrin

Tetra-platinated(II) porphyrin hexafluorophosphate compound (4-PtTPyPor) was synthetized and along 5,10,15,20-tetrakis(4-pyridyl)porphyrin (4-TPyPor), evaluated about the antimicrobial activity and safety. The effect was evaluated with and without light exposition. The antimicrobial activity was analyzed by microdilution and growth curve method. The assays showed an increase of antimicrobial potential caused by porphyrins with light exposition comparing the treatment without light irradiation. The biocompatibility was tested by MTT, ROS production, dsDNA on culture medium and hemolysis. All platinum porphyrin concentrations showed hemolytic activity under light exposition. The ROS measurement doesn't showed statistic difference between treatments and control. The picogreen assay demonstrates a reduction of dsDNA on culture medium with cells treated with porphyrins under light irradiation. The study demonstrated that the platinated porphyrins might be promising microbial photodynamic inactivation with potential applications in wastewater treatment, biofilm control and bioremediation.

Electron beam functionalized photodynamic polyethersulfone membranes - photophysical characterization and antimicrobial activity

Polymer membranes are powerful filtration tools in medicine and water treatment. Their efficiency and operational lifetime is limited by biofouling caused by microorganisms. This study describes the development of photodynamical active antimicrobial polymer membranes in a one-pot functionalization step using a well-known photosensitizer (PS). Commercially available polyethersulfone (PES) membranes for microfiltration were doped with the polycationic PS TMPyP using electron beam irradiation. These membranes were characterized in terms of binding stability and quantification of the PS and membrane morphology. Furthermore, the photodynamic ability was verified by time resolved singlet oxygen luminescence scans and successfully tested against the Gram-negative bacterium E. coli under low dose white light illumination resulting in the reduction in cell survival of 6 log10 units. Finally, in preliminarily experiments the photodynamic action against the Gram-positive bacteria M. luteus and the Gram-negative P. fluorescence and the mold C. cladosporioides was demonstrated. These promising results show the high photodynamic potential of electron beam functionalization of PES membranes with TMPyP. It preserves the photodynamic abilities of the immobilized PS resulting in efficient photodynamic inactivation of bacteria and mold on the membrane surface. The uprising worldwide spread of antibiotic resistant bacteria makes the development of new antibacterial strategies an inevitable challenge. The photodynamic inactivation of bacteria and its adaptation for antimicrobial surfaces, e.g. filtration membranes for water treatment, displays many advantages in terms of a wide application range, low mutagenic potential and environmental compatibility.

Revisiting Current Photoactive Materials for Antimicrobial Photodynamic Therapy

Microbial infection is a severe concern, requiring the use of significant amounts of antimicrobials/biocides, not only in the hospital setting, but also in other environments. The increasing use of antimicrobial drugs and the rapid adaptability of microorganisms to these agents, have contributed to a sharp increase of antimicrobial resistance. It is obvious that the development of new strategies to combat planktonic and biofilm-embedded microorganisms is required. Photodynamic inactivation (PDI) is being recognized as an effective method to inactivate a broad spectrum of microorganisms, including those resistant to conventional antimicrobials. In the last few years, the development and biological assessment of new photosensitizers for PDI were accompanied by their immobilization in different supports having in mind the extension of the photodynamic principle to new applications, such as the disinfection of blood, water, and surfaces. In this review, we intended to cover a significant amount of recent work considering a diversity of photosensitizers and supports to achieve an effective photoinactivation. Special attention is devoted to the chemistry behind the preparation of the photomaterials by recurring to extensive examples, illustrating the design strategies. Additionally, we highlighted the biological challenges of each formulation expecting that the compiled information could motivate the development of other effective photoactive materials.

Magnetite–Corrole Hybrid Nanoparticles

This study describes the first example of a hybrid material comprising corrole- and silica-coated magnetite nanoparticles. Firstly, cuboid and spheroid magnetite nanoparticles were prepared using a simple hydrothermal route, followed by a silica coating. The hybrid nanoparticles were obtained by promoting a covalent link between a gallium (III)(pyridine) complex of 5,10,15-tris(pentafluorophenyl)corrole (GaPFC) and the surface of magnetite–silica core/shell nanoparticles (Fe3O4@SiO2), shaped both as cuboids and spheroids. The hybrids were characterized using Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), ultraviolet-visible spectrophotometry (UV-Vis) and transmission electron microscopy (TEM). Preliminary studies on the capacity of singlet oxygen generation of the hybrid nanoparticles showed that these have lower efficiency values when compared to the pure corrole compound.

Evaluation of meso-substituted cationic corroles as potential antibacterial agents

Cationic derivatives of 5,10,15-tris[4-(pyridin-4-ylsulphanyl)-2,3,5,6-tetrafluorophenyl]-corrolategallium(III)pyridine and 5,10,15-tris[4-(pyridin-2-ylsulfanyl)-2,3,5,6-tetrafluorophenyl]-correlategallium(III)pyridine were synthesized and their photosensitizing properties against the naturally bioluminescent Gram-negative bacterium Allivibrio fischeri were evaluated. The cationic corrole derivatives exhibited antibacterial activity at micromolar concentrations against this Gram-negative bacterium strain.

Microorganisms-based methods for harmful algal blooms control: A review

Harmful algal blooms (HABs) are a worldwide problem with numerous negative effects on water systems, which have prompted researchers to study applicable measures to inhibit and control them. This review summarized the current microorganisms-based methods or technologies aimed at controlling HABs. Based on their characteristics, these methods can be divided into two categories: methods based on single-species microorganisms and methods based on microbial aggregates, and four types: methods for rapid decrease of algal cells density (e.g., alga-bacterium and alga-fungus bioflocculation), inhibition of harmful algal growth, lysis of harmful algae (e.g. algicidal bacteria, fungi, and actinomycete), and methods based on microbial aggregates (periphytons and biofilms). An integrative process of "flocculation-lysis-degradation-nutrients regulation" is proposed to control HABs. This review not only offers a systematic understanding of HABs control technologies based on microorganisms but also elicits a re-thinking of HABs control based on microbial aggregates.

Ultrafast Dynamics of Sb-Corroles: A Combined Vis-Pump Supercontinuum Probe and Broadband Fluorescence Up-Conversion Study

Corroles are a developing class of tetrapyrrole-based molecules with significant chemical potential and relatively unexplored photophysical properties. We combined femtosecond broadband fluorescence up-conversion and fs broadband Vis-pump Vis-probe spectroscopy to comprehensively characterize the photoreaction of 5,10,15-tris-pentafluorophenyl-corrolato-antimony(V)-trans-difluoride (Sb-tpfc-F₂). Upon fs Soret band excitation at ~400 nm, the energy relaxed almost completely to Q band electronic excited states with a time constant of 500 ± 100 fs; this is evident from the decay of Soret band fluorescence at around 430 nm and the rise time of Q band fluorescence, as well as from Q band stimulated emission signals at 600 and 650 nm with the same time constant. Relaxation processes on a time scale of 10 and 20 ps were observed in the fluorescence and absorption signals. Triplet formation showed a time constant of 400 ps, with an intersystem crossing yield from the Q band to the triplet manifold of between 95% and 99%. This efficient triplet formation is due to the spin-orbit coupling of the antimony ion.

Strategies for Corrole Functionalization

This review covers the functionalization reactions of meso-arylcorroles, both at the inner core, as well as the peripheral positions of the macrocycle. Experimental details for the synthesis of all known metallocorrole types and for the N-alkylation reactions are presented. Key peripheral functionalization reactions such as halogenation, formylation, carboxylation, nitration, sulfonation, and others are discussed in detail, particularly the nucleophilic aromatic substitution and the participation of corroles in cycloaddition reactions as 2π or 4π components (covering Diels-Alder and 1,3-dipolar cycloadditions). Other functionalizations of corroles include a large diversity of reactions, namely Wittig reactions, reactions with methylene active compounds, formation of amines, amides, and imines, and metal catalyzed reactions. At the final section, the reactions involving oxidation and ring expansion of the corrole macrocycle are described comprehensively.

Fighting Cancer with Corroles

Corroles are exceptionally promising platforms for the development of agents for simultaneous cancer-targeting imaging and therapy. Depending on the element chelated by the corrole, these theranostic agents may be tuned primarily for diagnostic or therapeutic function. Versatile synthetic methodologies allow for the preparation of amphipolar derivatives, which form stable noncovalent conjugates with targeting biomolecules. These conjugates can be engineered for imaging and targeting as well as therapeutic function within one theranostic assembly. In this review, we begin with a brief outline of corrole chemistry that has been uniquely useful in designing corrole-based anticancer agents. Then we turn attention to the early literature regarding corrole anticancer activity, which commenced one year after the first scalable synthesis was reported (1999-2000). In 2001, a major advance was made with the introduction of negatively charged corroles, as these molecules, being amphipolar, form stable conjugates with many proteins. More recently, both cellular uptake and intracellular trafficking of metallocorroles have been documented in experimental investigations employing advanced optical spectroscopic as well as magnetic resonance imaging techniques. Key results from work on both cellular and animal models are reviewed, with emphasis on those that have shed new light on the mechanisms associated with anticancer activity. In closing, we predict a very bright future for corrole anticancer research, as it is experiencing exponential growth, taking full advantage of recently developed imaging and therapeutic modalities.

Ultrafast electronic and vibrational dynamics in brominated aluminum corroles: Energy relaxation and triplet formation

We combined femtosecond (fs) VIS pump-IR probe spectroscopy with fs VIS pump-supercontinuum probe spectroscopy to characterize the photoreaction of the hexacoordinated Al(tpfc-Br8)(py)2 in a comprehensive way. Upon fs excitation at ∼400 nm in the Soret band, the excitation energy relaxes with a time constant of (250 ± 80) fs to the S2 and S1 electronic excited states. This is evident from the rise time of the stimulated emission signal in the visible spectral range. On the same time scale, narrowing of broad infrared signals in the C=C stretching region around 1500 cm(-1) is observed. Energy redistribution processes are visible in the vibrational and electronic dynamics with time constants between ∼2 ps and ∼20 ps. Triplet formation is detected with a time constant of (95 ± 3) ps. This is tracked by the complete loss of stimulated emission. Electronic transition of the emerging triplet absorption band overlaps considerably with the singlet excited state absorption. In contrast, two well separated vibrational marker bands for triplet formation were identified at 1477 cm(-1) and at 1508 cm(-1). These marker bands allow a precise identification of triplet dynamics in corrole systems.

Development of Singlet Oxygen Luminescence Kinetics during the Photodynamic Inactivation of Green Algae

Recent studies show the feasibility of photodynamic inactivation of green algae as a vital step towards an effective photodynamic suppression of biofilms by using functionalized surfaces. The investigation of the intrinsic mechanisms of photodynamic inactivation in green algae represents the next step in order to determine optimization parameters. The observation of singlet oxygen luminescence kinetics proved to be a very effective approach towards understanding mechanisms on a cellular level. In this study, the first two-dimensional measurement of singlet oxygen kinetics in phototrophic microorganisms on surfaces during photodynamic inactivation is presented. We established a system of reproducible algae samples on surfaces, incubated with two different cationic, antimicrobial potent photosensitizers. Fluorescence microscopy images indicate that one photosensitizer localizes inside the green algae while the other accumulates along the outer algae cell wall. A newly developed setup allows for the measurement of singlet oxygen luminescence on the green algae sample surfaces over several days. The kinetics of the singlet oxygen luminescence of both photosensitizers show different developments and a distinct change over time, corresponding with the differences in their localization as well as their photosensitization potential. While the complexity of the signal reveals a challenge for the future, this study incontrovertibly marks a crucial, inevitable step in the investigation of photodynamic inactivation of biofilms: it shows the feasibility of using the singlet oxygen luminescence kinetics to investigate photodynamic effects on surfaces and thus opens a field for numerous investigations.

Photodynamic inactivation of biofilm building microorganisms by photoactive facade paints

This study was performed as a proof of concept for singlet oxygen generating facade paint as an alternative to conventional biocide containing facade paint for the prevention of biofilm growth on outdoor walls. Biofilms on outdoor walls cause esthetic problems and economic damage. Therefore facade paints often contain biocides. However commercially available biocides may have a series of adverse effects on living organisms as well as harmful environmental effects. Furthermore, biocides are increasingly designed to be more effective and are environmentally persistent. Thus, an eco-friendly and non-harmful to human health alternative to conventional biocides in wall color is strongly recommended. The well-known photosensitizer 5,10,15,20-tetrakis(N-methyl-4-pyridyl)-21H,23H-porphine (TMPyP) was used as an additive in a commercially available facade paint. The generation of singlet molecular oxygen was shown using time resolved 2D measurements of the singlet oxygen luminescence. The photodynamic activity of the photosensitizer in the facade paint was demonstrated by phototoxicity tests with defined mold fungi and a mixture of microorganisms harvested from native outdoor biofilms as model organisms. It was proven in general that it is possible to inhibit the growth of biofilm forming microorganisms growing on solid wall paint surfaces by the cationic photosensitizer TMPyP added to the facade paint using daylight conditions for illumination in 12h light and dark cycles.

Fluorinated Photodynamic Therapy Device Tips and their Resistance to Fouling for In Vivo Sensitizer Release

We describe progress on a one-step photodynamic therapy (PDT) technique that is simple: device tip delivery of sensitizer, oxygen and light simultaneously. Control is essential for their delivery to target sites to generate singlet oxygen. One potential problem is the silica device tip may suffer from biomaterial fouling and the pace of sensitizer photorelease is slowed. Here, we have used biomaterial (e.g. proteins, cells, etc.) from SQ20B head and neck tumors and whole blood for an assessment of fouling of the silica tips by adsorption. It was shown that by exchanging the native silica tip for a fluorinated tip, a better nonstick property led to an increased sensitizer output by ~10%. The fluorinated tip gave a sigmoidal photorelease where singlet oxygen is stabilized to physical quenching, whereas the native silica tip with unprotected SiO-H groups gave a slower (pseudolinear) photorelease. A further benefit from fluorinated silica is that 15% less biomaterial adheres to its surface compared to native silica based on a bicinchoninic acid assay (BCA) and X-ray photoelectron spectroscopy (XPS) measurements. We discuss how the fluorination of the device tip increases biofouling resistance and can contribute to a new pointsource PDT tool.

Light absorption and hole-transport properties of copper corroles: from aggregates to a liquid crystal mesophase

A room temperature corrole-based liquid crystal phase is described, fully characterized and compared to assemblies produced by simpler corrole derivatives.