Risk factors of tooth wear in permanent dentition: A scoping review

Tooth wear and bruxism: A scoping review

OBJECTIVE

This study presents a scoping review to determine the association between tooth wear and bruxism.

DATA

A protocol was developed a priori (Open Science Framework (DOI 10.17605/OSF.IO/CS7JX)). Established scoping review methods were used for screening, data extraction, and synthesis. Risk of bias was assessed using JBI tools. Direct associations between tooth wear and bruxism were assessed.

SOURCES

Embase, SCOPUS, Web of Science, Cochrane, and PubMed were searched.

STUDY SELECTION

Any clinical study containing tooth wear and bruxism assessment done on humans in any language was included. Animal, in-vitro studies and case reports were excluded.

CONCLUSIONS

Thirty publications reporting on the association between tooth wear and bruxism were included. The majority of publications were cross-sectional studies (90%) while only three were longitudinal (10%). Eleven papers assessed definitive bruxism for analysis (instrumental tools), one paper assessed probable bruxism (clinical inspection with self-report) and eighteen assessed possible bruxism (self-report). Of the eleven papers assessing definitive bruxism, eight also reported outcomes of non-instrumental tools. Tooth wear was mostly scored using indexes. Most studies reported no or weak associations between tooth wear and bruxism, except for the studies done on cervical tooth wear. When bruxism assessment was done through self-report, more often an association was found. Studies using multivariate analyses did not find an association between tooth wear and bruxism, except the cervical wear studies. Evidence shows inconclusive results as to whether bruxism and tooth wear are related or not. Therefore, well-designed longitudinal trials are needed to address this gap in the literature.

CLINICAL SIGNIFICANCE

Based on the evidence, dental clinicians should not infer bruxism activity solely on the presence of tooth wear.

Intraoral scanner-based monitoring of tooth wear in young adults: 36-month results

OBJECTIVES

The study continues our longitudinal observation of wear aiming to further monitoring of progression and lesion morphology and to identify relationships with assumed aetiological factors.

MATERIALS AND METHODS

Molars (FDI #36 or #46) of 74 participants (23.8 ± 2.2 years) were scanned (Trios 3, 3Shape) at the third follow-up (T3; observation period 1,111 ± 10 days). Data sets from T3, T2 (24-month follow-up) and T1 (12-month follow-up) were superimposed with baseline in a 3D analysis software (GOM Inspect). Wear was quantified as maximum vertical tissue loss (µm; median, 95% CI) in various occlusal areas (4/5 cusps and 2 ridges). Morphologies were classified into cupping (C), facet (F), and combined cupping-facet (CF). Aetiological factors were assessed with questionnaires.

RESULTS

Wear increased at T3 significantly at low rates in all areas of the occlusal surface (median between 7.0 (4.0;10.5) and 9.5 (6.0;15.0) µm). There was a clear trend for higher loss values in males, but no association with other factors such as nutrition. C and CF showed significantly higher loss values than F. Areas without initial wear developed F first, which either persisted or developed into C and CF.

CONCLUSIONS

Wear continued at low rates with C/CF morphology and sex as significant factors. Cupped lesions seem to develop from facets and thus may not be a valid diagnostic criterion for erosive tooth wear.

CLINICAL RELEVANCE

Wear is a cumulative process that apparently follows complex mechanisms that cannot be conceptualized in simplified terms; C and CF may be indicators for higher progression rates.

Risk factors or indicators for dental caries and tooth wear and their relative importance in adults according to age

OBJECTIVES

To explore the risk factors for dental caries (DC) and tooth wear (TW) and assess their importance according to age in random French adult patients with >1 partial coronal restoration.

METHODS

The data stem from a prospective observational multicentre cross-sectional study and were collected through interviews and clinical examinations. The study involved 96 dentists from 76 hospital and private clinics and included 822 patients. The data analysed in three age groups (18-29, 30-59, and ≥ 60). Univariate logistic regressions were performed and predictions of DC or TW described using decision trees.

RESULTS

The study confirmed the major influences of oral hygiene, acceptable sugary/acidic beverage consumption and regular dental visits in reducing DC and TW. Further, it exposed age-related risk factors for DC such being a "new patient" and having an "excessive sugary/acidic beverage consumption" in the youngest adults, or "irregular dental visits" in middle-aged adults and in the oldest.

CONCLUSIONS

For appropriate preventive counselling, risk factor assessment should be extensive and age- and dental history-oriented because of unexpected age-related risk factors or risk factor combinations.

CLINICAL SIGNIFICANCE

These results are likely to make better-grounded new recommendations given to young adults since their first visits and throughout their dental clinical pathway.

The Prevalence of Tooth Wear and Their Associated Etiologies Among Adult Subjects Visiting Umm Al-Qura University Dental Clinic in Makkah City, Saudi Arabia

In the past two decades, changing trends in socioeconomic status, dietary habits, and individual lifestyles of individuals have led to the emergence of tooth wear as an oral health problem. The present study aimed to investigate the prevalence and the associated etiologies of tooth wear in a convenience sample of adult patients visiting outpatient clinics of the Faculty of Dentistry at Umm Al-Qura University. This cross-sectional study was conducted on adult patients (18-40 years old) visiting outpatient clinics of the Faculty of Dentistry, Umm Al-Qura University. Two trained examiners visually assessed patients' tooth wear using Smith and Knight's Tooth Wear Index (TWI). Following the clinical examination, patients completed a self-administered questionnaire detailing risk factors such as the frequency of intake of acidic food and medicines, general health, chewing habits, dietary factors, and oral health-associated preventive behaviors. The resulting collected data were tabulated and statistically analyzed using Statistical Product and Service Solutions (SPSS, version 21; IBM SPSS Statistics for Windows, Armonk, NY). The total prevalence of tooth wear was 74%, and the recorded mean wear score (TWI) was 0.380 ± 0.386; anterior teeth exhibited greater wear than posterior teeth. Numerous associations were recorded between tooth wear and the tested variables in demographics, habits, diet, and medications, but most of them were not statistically significant. When toothbrushing habits were explored, the only factors to played a significant role in abrading the tooth structure were the type of brush bristles used (P-value = 0.026) and the frequency of brush renewal (P = 0.043). Patients who frequently ate citrus fruits and other acidic foods recorded high wear scores (0.509 ± 0.311 and 0.508 ± 0.402, respectively), although the difference was not statistically significant. When chewing occurred on both sides of the mouth, less tooth wear was recorded than if chewing was on the right or left side only (0.371 ± 0.260, 0.422 ± 0.273, and 0.520 ± 0.419, respectively). The study data support an association between tooth wear and patient occupation, use of hard-bristled and new toothbrushes, eating of citrus and other acidic food, and chewing on one side, as all of these factors increased the risk of tooth wear.

5.5-year-survival of CAD/CAM resin-based composite restorations in severe tooth wear patients

OBJECTIVES

Aim of this prospective study was to assess full mouth rehabilitation of severe tooth wear patients using minimally invasive CAD/CAM resin-based composite (RBC) restorations and direct veneers by evaluating restoration survival up to 5.5-years.

METHODS

Twenty-two patients with generalized severe tooth wear with functional and/or esthetic problems were included. Following minimally invasive preparation, CAD/CAM RBC restorations (LAVA Ultimate,3M) were adhesively luted, direct RBC veneers (Filtek Supreme XTE, 3M) were applied in the aesthetic region. Patients were recalled after 1m,1y,3y,5y and seen in between recalls by their general dentists or at the clinical study center if complaints occurred. Failures were categorized as F1 (severe deficiencies requiring replacement/extraction), F2 (localized deficiencies requiring re-cementation/repair) and F3 (small chippings requiring refurbishment/monitoring). Survival of indirect restorations was evaluated using lifetables and Kaplan-Meier-graphs, distinguishing between failure categories and tooth type (front teeth=FT, premolars=PM, molars=M). F1 + F2 and F1 + F2 + F3 failures were analyzed using Cox regression on the variables tooth type/ location, age, gender and VDO increase (p < 0.05).

RESULTS

568 indirect restorations and 200 direct veneers in 21 patients evaluated for up to 5.5-years. For indirect restorations, 96 failures were recorded (F1:6;F2:41;F3:49) and annual failure rates were 0.29%(FT), 1.56%(PM), 2.93%(M) for F1 +F2 and 0.53%(FT), 2.42%(PM), 6.11%(M) for F1 + F2 + F3. Reasons for failure were chipping fracture (48), adhesive fracture (32), complete debonding (7), caries (4), endodontic treatment (1) and reasons unknown (documentation general dentists, 4). Molar tooth type had a statistically significantly increased probability of failure compared with front teeth and premolars for F1 + F2 + F3 (p < 0.006). Direct veneer restorations showed 18 failures (F1:2;F2:9;F3:7).

SIGNIFICANCE

Minimally invasive CAD/CAM RBC restorations combined with direct RBC veneers showed an acceptable clinical mid-term survival for restorative rehabilitation of severely worn dentitions.

Long-term occlusal tooth wear at the onset of permanent dentition

OBJECTIVES

This study quantified the long-term occlusal wear in the natural posterior teeth and the associations per tooth type within the dentition.

METHODS

The sample included 70 orthodontically treated subjects (52 females and 18 males; median age, 14.3 years), followed for a 12.7-year period. They were consecutively selected with no tooth wear-related criteria. Post-treatment (T1) and follow-up dental casts (T2) were scanned and superimposed through three-dimensional methods. Occlusal wear volume of posterior teeth and tooth wear patterns were investigated through non-parametric statistics and analysis of covariance.

RESULTS

There were no significant differences between contralateral teeth. The average occlusal wear per posterior tooth was 2.3 mm3, with 65.2% of teeth showing values greater than 1 mm3. Males, mandibular teeth, and first molars exhibited slightly greater wear levels than females (median, 2.57 and 2.21 mm3, respectively; p = 0.005), maxillary teeth, and first or second premolars, respectively. In all first premolars and in the mandibular second premolars, the buccal cusps were primarily affected with no other distinct patterns. There were weak to moderate correlations between tooth types, apart from certain strong correlations detected in males.

CONCLUSIONS

Posterior tooth wear was highly prevalent after a 13-year period starting at the onset of permanent dentition. The detected patterns are in accordance with the concept of canine guidance occlusion that is transforming into group synergy through function.

CLINICAL RELEVANCE

The widespread tooth wear occurrence and the high intra- and inter-individual variability underline the need for individual patient monitoring to identify high-risk patients at early stages.

Tooth Wear in Older Adults: A Review of Clinical Studies

INTRODUCTION

Tooth wear is a prevalent dental condition among older adults, leading to pain and adversely affecting aesthetics, functionality, and their overall quality of life. This review aims to update the information on tooth wear in older adults from the past five years and to provide guidance on the clinical management of tooth wear in older adults.

METHODS

A literature search was conducted in three electronic databases, Scopus, Pubmed, and Embase, for English publications from January 2019 to December 2023 on clinical studies with participants aged 65 or above on tooth wear. A total of 307 articles were retrieved and 14 articles were finally included as references for this study.

RESULTS

This review highlights the common causes of tooth wear and various risk factors, such as medical conditions, hyposalivation, dietary habits, oral hygiene practices, parafunctional habits, and occlusal factors, associated with tooth wear. It is crucial for oral health care professionals to diagnose and manage tooth wear at an early stage through a risk assessment and a clinical examination to avoid complex restorative procedures. Tooth wear management should prioritize prevention, aiming to control etiological and risk factors while employing non-restorative treatments. Restorative intervention, if indicated, should be simple, minimally invasive, and cost-effective. Tooth wear progression should be monitored regularly to determine if a further intervention is needed.

CONCLUSION

Since the clinical studies on tooth wear in older adults over the past five years are limited and mainly cross-sectional, more interventional clinical studies are warranted to provide more clinical guidance on tooth wear management in older adults.

Oral Health and Behavior Patterns of Women with Eating Disorders-A Clinical Pilot Study

BACKGROUND

Chronic stomach regurgitation associated with eating disorders (EDs) poses a high risk for tooth erosion. This study investigated oral health conditions, behavioral patterns, and tooth erosion in women with EDs.

METHODS

16 ED and 13 healthy women were enrolled; 14 ED and 10 healthy control subjects completed the study. Subjects completed demographic, medical, oral, and behavioral health history questionnaires. Dental caries status was recorded as Decayed, Missing and Filled Teeth (DMFT)index and the severity of tooth erosion as Basic Erosive Wear Examination (BEWE) scores. Saliva was collected for flow rate, pH, and buffering capacity analysis.

RESULTS

The ED group had a lower stimulated saliva flow rate and higher DMFT index but no significant difference in BEWE scores compared to the controls (t-test, significance level 0.05). Five of the fourteen ED subjects exhibited extensive tooth erosion, which may have been exacerbated by their tooth-brushing behavior.

CONCLUSIONS

Although some ED subjects showed extensive tooth erosion in this pilot study, the average BEWE score of the ED group was not significantly different from the controls. Extensive tooth erosion in ED may relate to the low stimulated salivary flow. A larger-scale clinical study is necessary to validate these results.

Clinical longevity of direct and indirect posterior resin composite restorations: An updated systematic review and meta-analysis

OBJECTIVES

To answer the PICO(S) question: Is there a difference in clinical longevity between direct and indirect resin composite restorations placed on permanent posterior teeth?

DATA

Randomized controlled clinical trials (RCTs) investigating direct and indirect resin composite restorations in posterior permanent teeth were considered.

SOURCES

Several electronic databases were searched, with no language or date restrictions. The revised Cochrane Collaboration's tool for assessing risk of bias (RoB-2) was used to analyze the studies; meta-analyses were run and the certainty of evidence was assessed by the GRADE tool. A subgroup meta-analysis was performed for resin composite restorations placed on posterior worn dentition.

STUDY SELECTION

Twenty-three articles were included in qualitative synthesis, while 8 studies were used for meta-analyses. According to the RoB-2 tool, 5 studies were ranked as "low risk", 7 had "some concerns", while 11 papers were rated as "high risk" of bias. There were no statistically significant differences in short-term (p = 0.27; RR=1.54, 95% CI [0.72, 3.33]), medium-term (p = 0.27; RR=1.87, 95% CI [0.61, 5.72]) and long-term longevity (p = 0.86; RR=0.95, 95% CI [0.57, 1.59]). The choice of restorative technique had no influence on short-term survival of resin composite restorations placed on worn dentition (p = 0.13; RR=0.46, 95% CI [0.17, 1.25]). The certainty of evidence was rated as "very low".

CONCLUSIONS

Direct and indirect resin composite restorations may show similar clinical longevity in posterior region, regardless of the observation period or substrate (wear-affected and non-affected dentition). The very low quality of evidence suggests that more long-term RCTs are needed to confirm our results.

Effect of the Abutment Rigidity on the Wear Resistance of a Lithium Disilicate Glass Ceramic: An In Vitro Study

Lithium disilicate (LDS) glass ceramics are among the most common biomaterials in conservative dentistry and prosthodontics, and their wear behavior is of paramount clinical interest. An innovative in vitro model is presented, which employs CAD/CAM technology to simulate the periodontal ligament and alveolar bone. The model aims to evaluate the effect of the abutment rigidity on the wear resistance of the LDS glass ceramic. Two experimental groups (LDS restorations supported by dental implants, named LDS-on-Implant, or by hybrid ceramic tooth replicas with artificial periodontal ligament, named LDS-on-Tooth-Replica) and a control group (LDS-Cylinders) were compared. Fifteen samples (n = 15) were fabricated for each group and subjected to testing, with LDS antagonistic cusps opposing them over 120,000 cycles using a dual axis chewing simulator. Wear resistance was analyzed by measuring the vertical wear depth (mm) and the volume loss (mm3) on each LDS sample, as well as the linear antagonist wear (mm) on LDS cusps. Mean values were calculated for LDS-Cylinders (0.186 mm, 0.322 mm3, 0.220 mm, respectively), LDS-on-Implant (0.128 mm, 0.166 mm3, 0.199 mm, respectively), and LDS-on-Tooth-Replica (0.098 mm, 0.107 mm3, 0.172 mm, respectively) and compared using one-way-ANOVA and Tukey's tests. The level of significance was set at 0.05 in all tests. Wear facets were inspected under a scanning electron microscope. Data analysis revealed that abutment rigidity was able to significantly affect the wear pattern of LDS, which seems to be more intense on rigid implant-abutment supports compared to resilient teeth replicas with artificial periodontal ligament.