Specific capture and detection of Staphylococcus aureus with high-affinity modified aptamers to cell surface components

Advances in Diagnostic Approaches and Therapeutic Management in Bovine Mastitis

Mastitis causes huge economic losses to dairy farmers worldwide, which largely negatively affects the quality and quantity of milk. Mastitis decreases overall milk production, degrades milk quality, increases milk losses because of milk being discarded, and increases overall production costs due to higher treatment and labour costs and premature culling. This review article discusses mastitis with respect to its clinical epidemiology, the pathogens involved, economic losses, and basic and advanced diagnostic tools that have been used in recent times to diagnose mastitis effectively. There is an increasing focus on the application of novel therapeutic approaches as an alternative to conventional antibiotic therapy because of the decreasing effectiveness of antibiotics, emergence of antibiotic-resistant bacteria, issue of antibiotic residues in the food chain, food safety issues, and environmental impacts. This article also discussed nanoparticles'/chitosan's roles in antibiotic-resistant strains and ethno-veterinary practices for mastitis treatment in dairy cattle.

SELEX against whole-cell bacteria resulted in lipopolysaccharide binding aptamers

Nucleic acid aptamers are target-specific oligonucleotides selected from combinatorial libraries through an iterative in vitro screening process known as Systemic Evolution of Ligands by Exponential Enrichment (SELEX). In this report, the selection of bacteria differentiating ssDNA aptamer candidates from a combinatorial library through the whole-cell SELEX method was performed. The enriched SELEX pool was sequenced using Illumina Next-Generation Sequencing (NGS) technology and analyzed for the most abundant sequences using CLC Genomics Workbench. The sequencing data resulted in several oligonucleotide families from which three individual sequences were chosen per SELEX based on the copy numbers. The binding performance of the selected aptamers was assessed by flow cytometry and fluorescence spectroscopy, and the binding constants were estimated using binding saturation curves. Varying results were obtained from two independent SELEX procedures where the SELEX against the model gram-negative bacterium Escherichia coli provided more selective sequences while the SELEX library used against gram-positive bacterium Listeria monocytogenes did not evolve as expected. The sequences that emerged from E. coli SELEX were shown to bind Lipopolysaccharide residues (LPS) and inhibit LPS-induced macrophage polarization. Thus, it can be said that, performed whole-cell SELEX could be resulted as the selection of aptamers which can bind LPS and inhibit LPS induced inflammation response and thus can be candidates for the inhibition of bacterial infections. In future studies, the selected aptamer sequences could be structurally and chemically modified and exploited as potential diagnostic tools and therapeutic agents as LPS antagonists.

FluCell-SELEX Aptamers as Specific Binding Molecules for Diagnostics of the Health Relevant Gut Bacterium Akkermansia muciniphila

Based on their unique properties, oligonucleotide aptamers have been named a gift of biological chemistry to life science. We report the development of DNA aptamers as the first high-affinity binding molecules available for fast and rapid labeling of the human gut bacterium Akkermansia muciniphila with a certain impact on Alzheimer´s disease. Fast and reliable analyses of the composition of microbiomes is an emerging field in microbiology. We describe the molecular evolution and biochemical characterization of a specific aptamer library by a FluCell-SELEX and the characterization of specific molecules from the library by bioinformatics. The aptamer AKK13.1 exerted universal applicability in different analysis techniques in modern microbiology, including fluorimetry, confocal laser scanning microscopy and flow cytometry. It was also functional as a specific binding entity hybridized to anchor primers chemically coupled via acrydite-modification to the surface of a polyacrylamide-hydrogel, which can be prototypically used for the construction of affinity surfaces in sensor chips. Together, the performance and methodological flexibility of the aptamers presented here may open new routes not only to develop novel Akkermansia-specific assays for clinical microbiology and the analyses of human stool samples but may also be an excellent starting point for the construction of novel electronic biosensors.

Aptasensors for Staphylococcus aureus Risk Assessment in Food

Staphylococcus aureus (S. aureus) is the top ordinary pathogen causing epidemic and food poisoning. The authentication of S. aureus has great significance for pathologic diagnosis and food hygiene supervision. Various biosensor methods have been established for identification. This paper reviews the research progress of aptasensors for S. aureus detection, focusing on the classification of aptamer technologies, including optical aptasensors and electrochemical aptasensors. Furthermore, the feasibility and future challenges of S. aureus detection for aptamer assays are discussed. Combining aptasensors with nanomaterials appears to be the developing trend in aptasensors.

Aptamer-based diagnostic and therapeutic approaches in animals: Current potential and challenges

Fast and precise diagnosis of infectious and non-infectious animal diseases and their targeted treatments are of utmost importance for their clinical management. The existing biochemical, serological and molecular methods of disease diagnosis need improvement in their specificity, sensitivity and cost and, are generally not amenable for being used as points-of-care (POC) device. Further, with dramatic changes in environment and farm management practices, one should also arm ourselves and prepare for emerging and re-emerging animal diseases such as cancer, prion diseases, COVID-19, influenza etc. Aptamer – oligonucleotide or short peptides that can specifically bind to target molecules – have increasingly become popular in developing biosensors for sensitive detection of analytes, pathogens (bacteria, virus, fungus, prions), drug residues, toxins and, cancerous cells. They have also been proven successful in the cellular delivery of drugs and targeted therapy of infectious diseases and physiological disorders. However, the in vivo application of aptamer-mediated biosensing and therapy in animals has been limited. This paper reviews the existing reports on the application of aptamer-based biosensors and targeted therapy in animals. It also dissects the various modifications to aptamers that were found to be successful in in vivo application of the aptamers in diagnostics and therapeutics. Finally, it also highlights major challenges and future directions in the application of aptamers in the field of veterinary medicine.

Introducing SELEX via a semester-long course-based undergraduate research experience (CURE)

With the growing importance of the field of RNA biology, undergraduates need to perform RNA-related research. Systematic evolution of ligands by exponential enrichment (SELEX) has become an important method in RNA biology. The principles of SELEX were applied to a semester-long course-based undergraduate research experience (CURE) in which two rounds of in vivo functional selection of regions of a viral RNA were performed. As the labwork had an unknown outcome, students indicated that they were excited by the work and became invested in the experience. By completing two rounds of SELEX, the students repeated molecular methods (e.g., RNA extraction, RT-PCR, agarose gel electrophoresis, DNA purification, cloning, and sequence analysis) and reported that repetition reinforced their learning and helped them build confidence in their lab abilities. Students also appreciated that they did not learn a "technique-per-week" without context, but rather they understood why certain methods were used for certain molecular tasks. Results from a 19-question multiple-choice assessment indicated increased comprehension of theory underlying methods performed. Details regarding experimental methods and timeline, and assessment and attitudinal results from three student cohorts, are described herein.

Strategic advancements and multimodal applications of biofilm therapy

INTRODUCTION

Biofilm is a layer of mucilage consisting of bacterial species like Escherichia coli and Streptococcus aureus adhering to the solid cell surface. Biofilm is an important and novel approach in a delivery system consisting of six elements that includes extracellular DNA, enzymes, proteins, bacteria, exopolysaccharides and water channels. The biofilm formation is based on two mechanisms: extra polymeric substance and quorum sensing. The microbes present in biofilm prevent direct interaction between the cell surface and foreign materials, like allergens, or toxic gases, like carbon-monoxide and chlorofluorocarbon, entering the body.

AREAS COVERED

The authors focus on the novel applications of biofilms such as adhesives, tissue engineering, targeted delivery system, probiotics, nutrients delivery, etc. Moreover, the information of the factors for biofilm formation, techniques useful in biofilm formation, and clinical studies are also covered in this article.

EXPERT OPINION

Many people believe that biofilms have a negative impact on human health, but the expert opinion states that biofilm is a futuristic approach useful in therapeutics for the treatment of tumors and cancer. Biofilms can be combined with novel delivery systems such as nanoparticles, microparticles, etc. for better therapeutic action.

Whole cell-SELEX of aptamers with a tyrosine-like side chain against live bacteria

In an effort to expand the binding and recognition capabilities of aptamers, a nucleoside triphosphate modified with a phenol that mimics the side chain of tyrosine was used in the selection of DNA aptamers against live bacteria. Of multiple modified aptamers that were isolated against Escherichia coli DH5α cells, one aptamer displays high selectivity and affinity for the target cells and is greatly enriched for phenol-modified dU nucleotides (dU^y, 47.5%). When the same sequences are synthesized with TTP, no binding is observed. Taken together, these findings highlight the value of using modified nucleotide triphosphates in aptamer selections and portends success in SELEX against an array of whole cells as targets.

A densely modified M2+-independent DNAzyme that cleaves RNA efficiently with multiple catalytic turnover

Sequence-specific cleavage of RNA targets in the absence of a divalent metal cation (M²⁺) has been a long-standing goal in bioorganic chemistry. Herein, we report the in vitro selection of novel RNA cleaving DNAzymes that are selected using 8-histaminyl-deoxyadenosine (dA^imTP), 5-guanidinoallyl-deoxyuridine (dU^gaTP), and 5-aminoallyl-deoxycytidine (dC^aaTP) along with dGTP. These modified dNTPs provide key functionalities reminiscent of the active sites of ribonucleases, notably RNase A. Of several such M²⁺-free DNAymes, DNAzyme 7-38-32 cleaves a 19 nt all-RNA substrate with multiple-turnover, under simulated physiological conditions wherein only 0.5 mM Mg²⁺ was present, attaining values of k_cat of 1.06 min^-1 and a K_M of 1.37 μM corresponding to a catalytic efficiency of ∼10⁶ M^-1 min^-1. Therefore, Dz7-38-32 represents a promising candidate towards the development of therapeutically efficient DNAzymes.

Capture and detection of Staphylococcus aureus with dual labeled aptamers to cell surface components

In the present study, a high throughput whole cell SELEX method has been applied successfully in selecting specific aptamers against whole cells of Staphylococcus aureus, a potent food poisoning bacterium. A total ten rounds of SELEX and three rounds of intermittent counter SELEX, was performed to obtain specific aptamers. Obtained oligonucleotide pool were cloned, sequenced and then grouped into different families based on their primary sequence homology and secondary structure similarity. FITC labeled sequences from different families were selected for further characterization via flow cytometry analysis. The dissociation constant (K_d) values of specific and higher binders ranged from 34 to 128nM. Binding assays to assess the selectivity of aptamer RAB10, RAB 20, RAB 28 and RAB 35 demonstrated high affinity against S. aureus and low binding affinity for other bacteria. To demonstrate the potential use of the aptamer a sensitive dual labeled sandwich detection system was developed using aptamer RAB10 and RAB 35 with a detection limit of 10²CFU/mL. Furthermore detection from mixed cell population and spiked sample emphasized the robustness as well as applicability of the developed method. Altogether, the established assay could be a reliable detection tool for the routine investigation of Staphylococcus aureus in samples from food and clinical sources.

On the challenges of detecting whole Staphylococcus aureus cells with biosensors

Due to the increasing number of nosocomial infections and multidrug-resistant bacterial strains, Staphylococcus aureus is now a major worldwide concern. Rapid detection and characterization of this bacterium has become an important issue for biomedical applications. Biosensors are increasingly appearing as low-cost, easy-to-operate and fast alternatives for rapid detection. In this review, we will introduce the main characteristics of S. aureus and will focus on the interest of biosensors for a faster detection of whole S. aureus cells. In particular, we will review the most promising strategies in the choice of ligand for the design of selective and efficient biosensors. Their specific characteristics as well as their advantages and/or disadvantages will also be commented.

Aptamer-assisted novel technologies for detecting bacterial pathogens

Nowadays, all people are at risk of infectious diseases that are mainly caused by bacteria causing infection. There is a permanent demand for an appropriate detection method that is affordable, practical, careful, rapid, sensitive, efficient and economical. Aptamers are single stranded DNA or RNA oligonucleotides, which can be recognized specifically and bind to their target molecules and also, be exploited in diagnostic applications. Recently, aptamer-based systems have offered great potentials in applications for the recognition of several important bacterial pathogens from clinical and food specimens. There are several reports appraising the diagnostic applicability of aptamer-based systems for the detection of pathogens. As for its excellent sensitivity, as well as its rapid and efficient detectability, this technique may be practical to indicate bacterial targets with less sample size and may consume less time than traditional methods These systems offer a promising approach for the sensitive and quick detection of food-borne and clinical agents. This review provides an overview of aptamer-based methods as a novel approach for detecting bacterial pathogens.

Rapid and label-free detection of protein a by aptamer-tethered porous silicon nanostructures

Protein A, which is secreted by and displayed on the cell membrane of Staphylococcus aureus is an important biomarker for S. aureus. Thus, its rapid and specific detection may facilitate the pathogen identification and initiation of proper treatment. Herein, we present a simple, label-free and rapid optical biosensor enabling specific detection of protein A. Protein A-binding aptamer serves as the capture probe and is immobilized onto a nanostructured porous silicon thin film, which serves as the optical transducer element. We demonstrate high sensitivity of the biosensor with a linear detection range between 8 and 23μM. The apparent dissociation constant was determined as 13.98μM and the LoD is 3.17μM. Harnessing the affinity between protein A and antibodies, a sandwich assay format was developed to amplify the optical signal associated with protein A capture by the aptamer. Using this approach, we increase the sensitivity of the biosensor, resulting in a three times lower LoD.

G-quadruplex aptamer targeting Protein A and its capability to detect Staphylococcus aureus demonstrated by ELONA

Aptamers for whole cell detection are selected mostly by the Cell-SELEX procedure. Alternatively, the use of specific cell surface epitopes as target during aptamer selections allows the development of aptamers with ability to bind whole cells. In this study, we integrated a formerly selected Protein A-binding aptamer PA#2/8 in an assay format called ELONA (Enzyme-Linked OligoNucleotide Assay) and evaluated the ability of the aptamer to recognise and bind to Staphylococcus aureus presenting Protein A on the cell surface. The full-length aptamer and one of its truncated variants could be demonstrated to specifically bind to Protein A-expressing intact cells of S. aureus, and thus have the potential to expand the portfolio of aptamers that can act as an analytical agent for the specific recognition and rapid detection of the bacterial pathogen. The functionality of the aptamer was found to be based on a very complex, but also highly variable structure. Two structural key elements were identified. The aptamer sequence contains several G-clusters allowing folding into a G-quadruplex structure with the potential of dimeric and multimeric assembly. An inverted repeat able to form an imperfect stem-loop at the 5'-end also contributes essentially to the aptameric function.

Applications of Aptamers in Flow and Imaging Cytometry

Aptamers compete with antibodies in many applications, in which high-affinity and specificity ligands are needed. In this regard, fluorescence-tagged aptamers have gained applications in flow and imaging cytometry for detecting cells expressing distinct antigens. Here we present prospective methods, as a starting point, for using these high-affinity ligands for cytometry applications.

In vitro Selection and Interaction Studies of a DNA Aptamer Targeting Protein A

A new DNA aptamer targeting Protein A is presented. The aptamer was selected by use of the FluMag-SELEX procedure. The SELEX technology (Systematic Evolution of Ligands by EXponential enrichment) is widely applied as an in vitro selection and amplification method to generate target-specific aptamers and exists in various modified variants. FluMag-SELEX is one of them and is characterized by the use of magnetic beads for target immobilization and fluorescently labeled oligonucleotides for monitoring the aptamer selection progress. Structural investigations and sequence truncation experiments of the selected aptamer for Protein A led to the conclusion, that a stem-loop structure at its 5’-end including the 5’-primer binding site is essential for aptamer-target binding. Extensive interaction analyses between aptamer and Protein A were performed by methods like surface plasmon resonance, MicroScale Thermophoresis and bead-based binding assays using fluorescence measurements. The binding of the aptamer to its target was thus investigated in assays with immobilization of one of the binding partners each, and with both binding partners in solution. Affinity constants were determined in the low micromolar to submicromolar range, increasing to the nanomolar range under the assumption of avidity. Protein A provides more than one binding site for the aptamer, which may overlap with the known binding sites for immunoglobulins. The aptamer binds specifically to both native and recombinant Protein A, but not to other immunoglobulin-binding proteins like Protein G and L. Cross specificity to other proteins was not found. The application of the aptamer is directed to Protein A detection or affinity purification. Moreover, whole cells of Staphylococcus aureus, presenting Protein A on the cell surface, could also be bound by the aptamer.

Surfaces for competitive selective bacterial capture from protein solutions

Active surfaces that form the basis for bacterial sensors for threat detection, food safety, or certain diagnostic applications rely on bacterial adhesion. However, bacteria capture from complex fluids on the active surfaces can be reduced by the competing adsorption of proteins and other large molecules. Such adsorption can also interfere with device performance. As a result, multiple upstream processing steps are frequently employed to separate macromolecules from any cells, which remain in the buffer. Here, we present an economical approach to capture bacteria, without competitive adsorption by proteins, on engineered surfaces that do not employ biomolecular recognition, antibodies, or other molecules with engineered sequences. The surfaces are based on polyethylene glycol (PEG) brushes that, on their own, repel both proteins and bacteria. These PEG brushes backfill the surface around sparsely adsorbed cationic polymer coils (here, poly-L-lysine (PLL)). The PLL coils are effectively embedded within the brush and produce locally cationic nanoscale regions that attract negatively charged regions of proteins or cells against the steric background repulsion from the PEG brush. By carefully designing the surfaces to include just enough PLL to capture bacteria, but not enough to capture proteins, we achieve sharp selectivity where S. aureus is captured from albumin- or fibrinogen-containing solutions, but free albumin or fibrinogen molecules are rejected from the surface. Bacterial adhesion on these surfaces is not reduced by competitive protein adsorption, in contrast to performance of more uniformly cationic surfaces. Also, protein adsorption to the bacteria does not interfere with capture, at least for the case of S. aureus, to which fibrinogen binds through a specific receptor.