Temporal sequence of hard and soft tissue healing around titanium dental implants

Zirconia Barriers in Bone Regeneration Procedures: A Scoping Review

PURPOSE

To identify the current status and development of zirconia barriers in bone augmentation procedures in the maxillofacial area of adult human patients.

MATERIALS AND METHODS

Two independent reviewers conducted an electronic literature search in PubMed/MEDLINE, Web of Science, Scopus, EBSCO, the Cochrane Library, and LILACS databases, as well as a manual search to identify eligible clinical studies up to April 15, 2024. The protocol was designed in accordance with the Preferred Reporting Items for Systematic Reviews and Meta-Analyses extension for Scoping Reviews guidelines.

RESULTS

The initial electronic search resulted in 240 studies. The systematic application of inclusion and exclusion criteria resulted in 6 articles that met the purpose of the study. The included articles were 5 clinical case series and 1 case report, published between 2016 and 2023. Only 4 articles reported histological studies. A total of 40 sites regenerated with zirconium barriers were reported in 30 patients. Results were obtained with variability in bone gain values, between 0.9-8.0 mm horizontally and 1.4-12.0 mm vertically, in addition to a 30% complication rate.

CONCLUSIONS

Although the results obtained in the studies included in this scoping review are favorable with respect to the amount of bone formation and the reduced surgical time required, the number of complications is considered high. Moreover, due to a limited number of patients included in the case series and the short duration of follow-up, additional studies including a control group are required.

Tetrahedral DNA Nanostructure-Modified Nanocoating for Improved Bioaffinity and Osseointegration of Titanium

Titanium (Ti) is extensively used in the medical field because of its excellent biomechanical properties; however, how to precisely fabricate Ti surfaces at a nanoscale remains challenging. In this study, a DNA nanocoating system to functionalize Ti surfaces via a series of sequential reactions involving hydroxylation, silanization, and click chemistry is developed. Tetrahedral DNA nanostructures (TDNs) of two different sizes (≈7 and 30 nm) are assembled and characterized for subsequent surface attachment. In vitro and in vivo assays demonstrated significantly enhanced cell adhesion, spreading, proliferation, osteogenesis, and osseointegration on Ti surfaces modified with 30-nm TDNs, compared to slightly improved effects with 7-nm TDNs. Mechanistic studies showed that the focal adhesion pathway contributed to the enhanced bioaffinity of the 30-nm TDNs, as evidenced by the upregulated expression of vinculin and activation of the Akt signaling pathway. Moreover, under inflammatory or hypoxic conditions, Ti surfaces modified with 30-nm TDNs maintained excellent cellular performance comparable to that under normal conditions, suggesting a broader adaptability for DNA nanoparticles. Thus, better performance is achieved following modification with 30-nm TDNs. In summary, the proposed DNA-guided nanocoating system provides a novel and efficient strategy for the surface nanofabrication of Ti.

Ablative and Expansive Protocols for Bone Osteotomy in Rabbits

Background: Cortical and marrow bone layer have different histomorphometric features. The traditional implant insertion technique provides for fixture stabilization through the cortical area. However, this approach has been found to result in an overstress of this bone layer, which may lead to resorption. Therefore, the aim of this study was to evaluate bone healing by applying two different implant site preparation protocols across various bone densities. Materials and Methods: One implant was placed in each femur and tibia of the rabbits (four implants per animal), using two distinct site preparation methods: drilling alone or drilling followed by osteotomes (funnel technique). Three regions around the implant were evaluated: cervical, marrow, and apical. The study included 12 rabbits, divided into two groups of 6 animals each, which were euthanized at 3 and 6 weeks, respectively (n = 6 per group). Results: In the cervical region of both femur and tibia, no marginal bone resorption could be detected. Similar BIC% (bone-to-implant contact percentages) were observed for funnel and drill sites after 3 weeks and 6 weeks of healing. Differences, though not statistically significant, ranged between 2.8% and 4.7%. However, higher BIC% values were observed in the femora compared to the tibia in both periods. Conclusions: No marginal bone loss was observed in both techniques. No statistically significant differences in bone resorption or bone-to-implant contact around the implant collar were observed when comparing two implant site preparation protocols across various bone densities. The use of osteotome did not influence the healing in the marrow region.

Influence of Implant Component Materials on Peri-Implant Soft Tissue Healing: A Comparative Histological and Immunohistochemical Study in Humans

BACKGROUND

Recently, the importance of peri-implant soft tissue integration quality has been recognised as an essential factor in the long-term success of dental implant rehabilitation.

AIM

The aim of this study was to explore the influence of three materials commonly used in implant dentistry, namely titanium (Ti), dental adhesive resin (Re) and polyetheretherketone (PEEK), on the peri-implant soft tissues.

METHODS

In this clinical randomised comparative study, 37 bone-level implants were placed, and experimental transmucosal healing abutments made of different materials were randomly assigned to each implant. These abutments were removed together with the surrounding soft tissues after 8 weeks. Immunohistochemical analyses were performed to determine the presence and localisation of different immune cells. In addition, clinical and radiographic data were collected and peri-implant bone remodeling was assessed.

RESULTS

Compared to the Ti and PEEK groups, Re abutments revealed a higher infiltration of macrophages in the connective tissue (p = 0.04) and neutrophils in the adjacent epithelium (p = 0.03). In the Re abutments, peri-implant bone remodeling was higher compared to the other groups (p = 0.01).

CONCLUSION

The use of resin material as a transmucosal healing abutment should be carefully considered as it was associated with a higher presence of inflammatory cells at 8 weeks post-implantation as well as superior bone remodeling compared to PEEK and Ti.

In vivo bioengineered tooth formation using decellularized tooth bud extracellular matrix scaffolds

The use of dental implants to replace lost or damaged teeth has become increasingly widespread due to their reported high survival and success rates. In reality, the long-term survival of dental implants remains a health concern, based on their short-term predicted survival of ~15 years, significant potential for jawbone resorption, and risk of peri-implantitis. The ability to create functional bioengineered teeth, composed of living tissues with properties similar to those of natural teeth, would be a significant improvement over currently used synthetic titanium implants. To address this possibility, our research has focused on creating biological tooth substitutes. The study presented here validates a potentially clinically relevant bioengineered tooth replacement therapy for eventual use in humans. We created bioengineered tooth buds by seeding decellularized tooth bud (dTB) extracellular matrix (ECM) scaffolds with human dental pulp cells, porcine tooth bud-derived dental epithelial cells, and human umbilical vein endothelial cells. The resulting bioengineered tooth bud constructs were implanted in the mandibles of adult Yucatan minipigs and grown for 2 or 4 months. We observed the formation of tooth-like tissues, including tooth-supporting periodontal ligament tissues, in cell-seeded dTB ECM constructs. This preclinical translational study validates this approach as a potential clinically relevant alternative to currently used dental implants.

Contrast-Enhanced Micro-CT Imaging of Murine Mandibles: A Multi-Method Approach for Simultaneous Hard and Soft Tissue Analysis

AIM

To develop and evaluate a novel multi-method micro-computed tomography (μCT) imaging protocol for enhanced visualization of both hard and soft tissues in murine mandibles, addressing the limitations of traditional imaging techniques in dental research.

MATERIALS AND METHODS

We employed a contrast-enhanced (CE) μCT imaging technique using Lugol's iodine as a contrast agent to visualize the intricate structures of murine mandibles. The protocol involved the combination of conventional μCT imaging as well as CE-μCT, including decalcification with EDTA, allowing for simultaneous assessment of hard and soft tissues. The method is compared with standard imaging modalities, and the ability to visualize detailed anatomical features is discussed.

RESULTS

The CE-μCT imaging technique provided superior visualization of murine mandibular structures, including dental pulp, periodontal ligaments and the surrounding soft tissues, along with conventional μCT imaging of alveolar bone and teeth. This method revealed detailed anatomical features with high specificity and contrast, surpassing traditional imaging approaches.

CONCLUSION

Our findings demonstrate the potential of CE-μCT imaging with Lugol's iodine as a powerful tool for dental research. This technique offers a comprehensive view of the murine mandible, facilitating advanced studies in tissue engineering, dental pathology and the development of dental materials.

Impact of autologous platelet concentrates on the osseointegration of dental implants

Osseointegration is defined as the direct deposition of bone onto biomaterial devices, most commonly composed from titanium, for the purpose of anchoring dental prostheses. The use of autologous platelet concentrates (APC) has the potential to enhance this process by modifying the interface between the host and the surface of the titanium implant. The rationale is to modify the implant surface and implant-bone interface via "biomimicry," a process whereby the deposition of the host's own proteins and extracellular matrix enhances the biocompatibility of the implant and hence accelerates the osteogenic healing process. This review of the available evidence reporting on the effect of APC on osseointegration explores in vitro laboratory studies of the interaction of APC with different implant surfaces, as well as the in vivo and clinical effects of APC on osseointegration in animal and human studies. The inherent variability associated with using autologous products, namely the unique composition of each individual's blood plasma, as well as the great variety in APC protocols, combination of biomaterials, and clinical/therapeutic application, makes it is difficult to make any firm conclusions about the in vivo and clinical effects of APC on osseointegration. The available evidence suggests that the clinical benefits of adding PRP and the liquid form of L-PRF (liquid fibrinogen) to any implant surface appear to be limited. The application of L-PRF membranes in the osteotomy site, however, may produce positive clinical effects at the early stage of healing (up to 6 weeks), by promoting early implant stability and reducing marginal bone loss, although no positive longer term effects were observed. Careful interpretation and cautious conclusions should be drawn from these findings as there were various limitations in methodology. Future studies should focus on better understanding of the influence of APCs on the biomaterial surface and designing controlled preclinical and clinical studies using standardized APC preparation and application protocols.

Effect of Platelet-Rich Fibrin Coating on Secondary Stability of Dental Implants: A Systematic Review and Meta-Analysis

A systematic review of the effect of platelet-rich fibrin (PRF) on the secondary stability of delayed dental implants is lacking. This systematic review and meta-analysis aims to evaluate if PRF's application on delayed implant placement enhances secondary stability. A comprehensive search was done on Pubmed, Cochrane Library, Embase, and Scopus databases to retrieve the records. Only randomized controlled trials (RCTs) or controlled clinical trials (CCTs) were included in the review. The outcome was secondary stability values measured in the implant stability quotient (ISQ). The meta-analysis was performed using a random effects model with 95% confidence intervals (CIs). We assessed the certainty of evidence using GRADEpro. We included 12 trials conducted worldwide involving 456 dental implants installed. Six studies showed a high risk of bias, whereas three had a low risk of bias, and three had an unclear risk of bias. One trial did not contribute to meta-analysis. Certainty of evidence was assessed for only one comparison, which reported follow-up at 12 weeks. Implant + PRF versus Implant + no PRF: the evidence for the secondary stability of implant at four weeks (Mean difference (MD) 3.34, 95% CI 2.24 to 4.43; implants = 302; studies = 8; I2 = 0%); at six weeks (MD 2.53, 95% CI 0.85 to 4.20; implants = 146; studies = 3; I2 = 0%) and at ≥12 weeks (MD 3.37, 95% CI 0.69 to 6.06; participants = 162; studies = 4; I2 = 17%) was of low certainty. There is low certainty of evidence (≥12 weeks follow-up) for implant stability by PRF coating during installation to confirm if it can be useful for the clinicians during the delayed dental implant placement. Well-planned RCTs need to be conducted with longer follow-ups of ≥12 weeks to strengthen the evidence.

Surface modification strategies to reinforce the soft tissue seal at transmucosal region of dental implants

Soft tissue seal around the transmucosal region of dental implants is crucial for shielding oral bacterial invasion and guaranteeing the long-term functioning of implants. Compared with the robust periodontal tissue barrier around a natural tooth, the peri-implant mucosa presents a lower bonding efficiency to the transmucosal region of dental implants, due to physiological structural differences. As such, the weaker soft tissue seal around the transmucosal region can be easily broken by oral pathogens, which may stimulate serious inflammatory responses and lead to the development of peri-implant mucositis. Without timely treatment, the curable peri-implant mucositis would evolve into irreversible peri-implantitis, finally causing the failure of implantation. Herein, this review has summarized current surface modification strategies for the transmucosal region of dental implants with improved soft tissue bonding capacities (e.g., improving surface wettability, fabricating micro/nano topographies, altering the surface chemical composition and constructing bioactive coatings). Furthermore, the surfaces with advanced soft tissue bonding abilities can be incorporated with antibacterial properties to prevent infections, and/or with immunomodulatory designs to facilitate the establishment of soft tissue seal. Finally, we proposed future research orientations for developing multifunctional surfaces, thus establishing a firm soft tissue seal at the transmucosal region and achieving the long-term predictability of dental implants.

The effect of photobiomodulation therapy on implant stability: A systematic review and meta-analysis

This study was designed to determine the effect of photobiomodulation therapy on dental implant stability. A complete systematic search was performed in PUBMED/MEDLINE, COCHRANE library databases, EMBASE, SCOPUS, and Google Scholar databases on articles published until June 2024. All the RCTs and CCTs reported the solo impact of photobiomodulation on dental implant stability in humans were included. The means and standard deviation for implant stability and sample size were extracted for the meta-analysis. The statistical analysis was conducted using Stata 17 software, and random effect models were applied to assess the source of heterogeneity. The I2 statistic was used to estimate the significance of any discrepancies in the therapy result. After a full-text inspection, 17 articles were qualified for systematic review, and 14 were included in the meta-analysis. Statically significant differences in implant stability were observed between the laser and the control groups on weeks 2 in ISQ reporting groups (p = 0.01, CI 95%) and weeks 4 and 8 in PTV reporting groups (p < 0.001, CI 95%). Despite limitations, the study suggests that PBM therapy benefits patients with dental implants at different periods, particularly during the early phases of healing.

Development of a Coculture Model for Assessing Competing Host Mammalian Cell and Bacterial Attachment on Zirconia versus Titanium

Objectives: Coculture models are limited by bacteria rapidly outcompeting host mammalian cells for nutrients in vitro, resulting in mammalian cell death. The goal of this study was to develop a coculture model enabling survival of mammalian cells and oral bacterial species to assess their competition for growth on dental implant materials. Methods: Two early colonizing oral bacterial species, Streptococcus mutans or Actinomyces naeslundii, were grown in coculture with primary human macrophages or human gingival fibroblasts for up to 7 days on tissue-culture treated polystyrene or polished titanium and zirconia disks. Chloramphenicol was supplemented in cell culture medium at bacteriostatic concentrations to maintain stable bacterial inoculum size. Planktonic and adherent bacterial growth was assessed via spot plating while mammalian cell growth and attachment were evaluated using colorimetric metabolic assay and confocal fluorescence microscopy, respectively. Results: Macrophages and fibroblasts proliferated in the presence of S. mutans and maintained viability above 70% during coculture for up to 7 days on tissue-culture treated polystyrene and polished titanium and zirconia. In contrast, both mammalian cell types exhibited decreasing proliferation and surface coverage on titanium and zirconia over time in coculture with A. naeslundii versus control. S. mutans and A. naeslundii were maintained within an order of magnitude of seeding inoculum sizes throughout coculture. Significance: Cell culture medium supplemented with antibiotics at bacteriostatic concentrations can suppress bacterial overgrowth and facilitate mammalian cell viability in coculture model systems. Within the study's limitations, oral bacteria and mammalian cell growth in coculture are comparable on polished titanium and zirconia surfaces.

Human gingival fibroblast response on zirconia and titanium implant abutment: A systematic review

PURPOSE

The peri-implant region, where restoration interfaces with mucosal tissue, plays an essential role in overall implant success and is just as important as osseointegration. The implant abutment materials are in intimate contact with human gingival fibroblasts (HGFs). This study compares the proliferation of HGFs between zirconia and titanium abutments used in dental implants.

METHODS

An electronic search was performed using PubMed, EMBASE, and Web of Science databases. English articles based on in vitro studies testing HGFs proliferation on zirconia and titanium implant abutment materials were included. A quality assessment of the selected study was performed using the web-based Science in Risk Assessment and Policy (SciRAP) tool. The HGFs proliferation and cellular morphology tests on zirconia and titanium materials from the included studies were summarized, exploring the role of material surface characteristics.

RESULTS

The electronic search yielded 401 studies, of which 17 were selected for inclusion. Zirconia exhibited comparable or superior efficacy in promoting the proliferation of HGFs compared to titanium. Observations on cellular morphology showed similar outcomes for both materials. Establishing a definitive relationship between contact angle, surface roughness, and their influence on cellular response remains challenging due to the varied methodological approaches in the reviewed studies.

CONCLUSION

Based on the findings of this systematic review, zirconia shows comparable reliability to titanium as an abutment material for HGFs proliferation, with comparable or superior HGFs proliferative outcomes.

A tantalum-containing zirconium-based metallic glass with superior endosseous implant relevant properties

Zirconium-based metallic glasses (Zr-MGs) are demonstrated to exhibit high mechanical strength, low elastic modulus and excellent biocompatibility, making them promising materials for endosseous implants. Meanwhile, tantalum (Ta) is also well known for its ideal corrosion resistance and biological effects. However, the metal has an elastic modulus as high as 186 GPa which is not comparable to the natural bone (10-30 GPa), and it also has a relative high cost. Here, to fully exploit the advantages of Ta as endosseous implants, a small amount of Ta (as low as 3 at. %) was successfully added into a Zr-MG to generate an advanced functional endosseous implant, Zr58Cu25Al14Ta3 MG, with superior comprehensive properties. Upon carefully dissecting the atomic structure and surface chemistry, the results show that amorphization of Ta enables the uniform distribution in material surface, leading to a significantly improved chemical stability and extensive material-cell contact regulation. Systematical analyses on the immunological, angiogenesis and osteogenesis capability of the material are carried out utilizing the next-generation sequencing, revealing that Zr58Cu25Al14Ta3 MG can regulate angiogenesis through VEGF signaling pathway and osteogenesis via BMP signaling pathway. Animal experiment further confirms a sound osseointegration of Zr58Cu25Al14Ta3 MG in achieving better bone-implant-contact and inducing faster peri-implant bone formation.

Revolutionizing Dental Implant Research: A Systematic Review on Three-Dimensional In Vitro Models

Dental implants have been clinically used for almost five decades with high success rates. In vitro research models used in implant dentistry are limited to two-dimensional experiments, which are reproducible and well adapted to evaluate a single parameter but do not reproduce the complexity of clinical settings. On the contrary, the in vivo research models using animals offer similar histological and anatomical features to humans, and tissue healing can be close to a clinical situation, but those models are usually accompanied with ethical concerns, and their outcomes could not be extrapolated to humans because of interspecies variabilities. This makes the development of novel in vitro models that recapitulate physiological events occurring during dental implant placement of particular interest for current research in dentistry. Also, such models could be challenged by setting a pathological environment (peri-implantitis) to better understand the disease and eventually serve as a platform to evaluate novel treatment modalities. The aim of this systematic literature review was to cover all the in vitro three-dimensional (3D) complex models available for research in implant dentistry. To accomplish this, a comprehensive search of the literature present on Scopus and PubMed databases was done using specific keywords, as well as inclusion/exclusion criteria. Out of 1334 articles found, we have finally included 27 articles in this review with publication dates between 2001 and 2022. In those articles, the 3D models were designed to study tissue-implant interface behavior in bone or gingival tissue. The articles focused on simulating implant integration, evaluating the effect of different conditions on implant integration, or developing an infection model for the implant integration process. The methods used involved implant material and cells organized in a specific 3D structure. The 3D models developed were able to simulate the process of dental implant osseo- and soft tissue integration and lead to results comparable with conventional in vitro and in vivo models. A relatively limited number of articles were obtained, which indicates that this is an emerging field, highly dependent on progresses made in biotechnologies and tissue engineering, and that further investigation is needed to enhance these 3D in vitro models.

Clinical evaluation of closed tray impression and intraoral scanning techniques in single posterior tissue-level implant-supported crowns: A self-controlled case study

STATEMENT OF PROBLEM

Different techniques have been used to record the locations of dental implants, yet research examining the clinical outcomes of posterior implant-supported prostheses generated by different techniques, particularly concerning their fit, is lacking.

PURPOSE

The purpose of this self-controlled study was to evaluate the clinical outcomes of closed tray impression making and intraoral scanning for single posterior implant-supported restorations.

MATERIAL AND METHODS

Eighty-two participants with a single missing posterior tooth were included. The restorations were delivered a minimum of 3 months after tissue-level implant placement. Each participant was provided with 2 screw-retained monolithic zirconia crowns, produced using 3-dimensional (3D) gel deposition from both closed tray impression making (control group) and intraoral scanning using an iTero scanner (experimental group). The recording operating time, the patient comfort assessed using a visual analog scale (VAS), and the fit of the crowns were recorded during clinical evaluation. The paired t test and Mann-Whitney U test were conducted to statistically analyze the differences between the 2 techniques (α=.05).

RESULTS

Seventy-six participants completed the study with a dropout rate of 7.3%. The mean ±standard deviation recording operating time of the control and experimental groups was 683 ±164 and 777 ±407 s, respectively (P<.05). The mean ±standard deviation VAS score of the control and experimental groups was 2.6 ±1.6 and 1.3 ±1.0, respectively (P<.05). The crowns in both groups showed excellent marginal fit (P>.05), but the occlusal contacts of crowns in the experimental group were significantly better (P<.05), while the interproximal contacts were significantly worse (P<.05) compared with those in the control group. In the control group, 1 crown was rated as Delta for occlusal contact and deemed clinically unacceptable.

CONCLUSIONS

In single posterior tissue-level implant-supported restorations, the clinical outcomes of most of the screw-retained monolithic zirconia crowns generated from closed tray impression making and intraoral scanning with the iTero system and fabricated by 3D gel deposition were acceptable. Compared with the closed tray impression technique, intraoral scanning resulted in better patient comfort and occlusal contacts but worse interproximal contacts. Efficiency was lower with intraoral scanning.

Investigation of the impact of planar microelectrodes on macrophage-mediated mesenchymal stem cell osteogenesis

Osseointegration commences with foreign body inflammation upon implant placement, where macrophages play a crucial role in the immune response. Subsequently, during the intermediate and late stages of osseointegration, mesenchymal stem cells (MSCs) migrate and initiate their osteogenic functions, while macrophages support MSCs in osteogenesis. The utilization of ferroelectric P(VDF-TrFE) covered ITO planar microelectrodes facilitated the simulation of various surface charge to investigate their effects on MSCs' osteogenic differentiation and macrophage polarization and the results indicated a parabolic increase in the promotional effect of both with the rise in piezoelectric coefficient. Furthermore, the surface charge with a piezoelectric coefficient of -18 exhibited the strongest influence on the promotion of M1 polarization of macrophages and the promotion of MSCs' osteogenic differentiation. The impact of macrophage polarization and MSC osteogenesis following the interaction of macrophages affected by surface charge and MSC was ultimately investigated. It was observed that macrophages affected by the surface charge of -18 piezoelectric coefficient still exerted the most profound induced osteogenic effect, validating the essential role of M1-type macrophages in the osteogenic differentiation of MSCs.

Signaling pathways of dental implants' osseointegration: a narrative review on two of the most relevant; NF-κB and Wnt pathways

INTRODUCTION

Cell signaling pathways are the biological reactions that control cell functions and fate. They also directly affect the body reactions to implanted biomaterials. It is well-known that dental implants success depends on a successful integration with the alveolar bone: "osseointegration" which events comprise early and later responses to the implanted biomaterials. The early events are mainly immune-inflammatory responses to the implant considered by its microenvironment as a foreign body. Later reactions are osteogenic aiming to regulate bone formation and remodeling. All these events are controlled by the cell signaling pathways in an incredible harmonious coordination.

AIM

The number of pathways having a role in osseointegration is so big to be reviewed in a single article. So the aim of this review was to study only two of the most relevant ones: the inflammatory Nuclear Factor Kappa B (NF-κB) pathway regulating the early osseointegration events and the osteogenic Wnt pathway regulating later events.

METHODS

We conducted a literature review using key databases to provide an overview about the NF-κB and Wnt cell signaling pathways and their mutual relationship with dental implants. A simplified narrative approach was conducted to explain these cell signaling pathways, their mode of activation and how they are related to the cellular events of osseointegration.

RESULTS AND CONCLUSION

NF-κB and Wnt cell signaling pathways are important cross-talking pathways that are affected by the implant's material and surface characteristics. The presence of the implant itself in the bone alters the intracellular events of both pathways in the adjacent implant's cellular microenvironment. Both pathways have a great role in the success or failure of osseointegration. Such knowledge can offer a new hope to treat failed implants and enhance osseointegration in difficult cases. This is consistent with advances in Omics technologies that can change the paradigm of dental implant therapy.

Effect of TiO2 Abutment Coatings on Peri-Implant Soft Tissue Behavior: A Systematic Review of In Vivo Studies

Establishing a proper soft tissue adhesion around the implant abutment is essential to prevent microbial invasion, inhibit epithelial downgrowth, and obtain an optimal healing process. This systematic review aims to evaluate the real potential of TiO2 coating on the behavior of peri-implant soft tissue health and maintenance. A specific aim was to evaluate clinically and histologically the effect of TiO2 abutment coating on epithelial and connective tissue attachment. Electronic database searches were conducted from 1990 to 2023 in MEDLINE/PubMed and the Web of Science databases. In total, 15 out of 485 publications were included. Eight studies involved humans, and seven were animal studies. Exposure time ranges from 2 days to 5 years. The peri-implant soft tissue evaluations included clinical assessment (plaque index (PI), peri-implant probing pocket depth (PPD), and bleeding on probing (BoP)), histological as well as histomorphometric analysis. The Office of Health Assessment and Translation (OHAT) Risk of Bias Rating Tool for Human and Animal Studies was used to evaluate the overall quality of the studies included in the review. The results showed some variation but remained within acceptable limits. Within the limitations of this systematic review, the present findings suggest that TiO2 coatings seem to influence soft tissue healing. TiO2-coated abutments with a roughness value between 0.2 and 0.5 μm enhance soft tissue health. Sol-gel-derived TiO2 coatings induced better soft tissue attachment than noncoated machined abutment surfaces. The anodized titanium abutments demonstrate comparable clinical and histological outcomes to conventional machined abutments. However, there was variation among the included studies concerning TiO2 coating characteristics and the measured outcomes used to evaluate the soft tissue response, and therefore, quantitative analysis was not feasible. Long-term in vivo studies with standardized soft tissue analysis and coating surface parameters are necessary before a definitive conclusion can be drawn. OSF Registration No.: 10.17605/OSF.IO/E5RQV.

Effects of immediate loading directionality on the mechanical sensing protein PIEZO1 expression and early-stage healing process of peri-implant bone

BACKGROUND

The reduced treatment time of dental implants with immediate loading protocol is an appealing solution for dentists and patients. However, there remains a significant risk of early peri-implant bone response following the placement of immediately loaded implants, and limited information is available regarding loading directions and the associated in vivo characteristics of peri-implant bone during the early stages. This study aimed to investigate the effects of immediate loading directionality on the expression of mechanical sensing protein PIEZO1 and the healing process of peri-implant bone in the early stage.

METHODS

Thirty-two implants were inserted into the goat iliac crest models with 10 N static lateral immediate loading applied, followed by histological, histomorphological, immunohistochemical, X-ray microscopy and energy dispersive X-ray spectroscopy evaluations conducted after 10 days.

RESULTS

From evaluations at the cellular, tissue, and organ levels, it was observed that the expression of mechanical sensing protein PIEZO1 in peri-implant bone was significantly higher in the compressive side compared to the tensile side. This finding coincided with trends observed in interfacial bone extracellular matrix (ECM) contact percentage, bone mass, and new bone formation.

CONCLUSIONS

This study provides a novel insight into the immediate loading directionality as a potential influence factor for dental implant treatments by demonstrating differential effects on the mechanical sensing protein PIEZO1 expression and related early-stage healing processes of peri-implant bone. Immediate loading directions serve as potential therapeutic influence factors for peri-implant bone during its early healing stage.

Influence of the Use of Transepithelial Abutments vs. Titanium Base Abutments on Microgap Formation at the Dental Implant-Abutment Interface: An In Vitro Study

This in vitro study aimed to assess the presence of microgaps at the implant-abutment interface in monolithic zirconia partial implant-supported fixed prostheses on transepithelial abutments versus Ti-base abutments.

METHODS

Sixty conical connection dental implants were divided into two groups (n = 30). The control group consisted of three-unit bridge monolithic zirconia connected to two implants by a transepithelial abutment. The test group consisted of monolithic zirconia three-unit restoration connected to two implants directly by a titanium base (Ti-base) abutment. The sample was subjected to thermocycling (10,000 cycles at 5 °C to 55 °C, dwelling time 50 s) and chewing simulation (300,000 cycles, under 200 N at frequencies of 2 Hz, at a 30° angle). The microgap was evaluated at six points (mesiobuccal, buccal, distobuccal, mesiolingual, lingual, and distolingual) of each implant-abutment interface by using a scanning electron microscope (SEM). The data were analyzed using the Mann-Whitney U tests (p > 0.05).

RESULTS

The SEM analysis showed a smaller microgap at the implant-abutment interface in the control group (0.270 μm) than in the test group (3.902 μm). Statistically significant differences were observed between both groups (p < 0.05).

CONCLUSIONS

The use or not of transepithelial abutments affects the microgap size. The transepithelial abutments group presented lower microgap values at the interface with the implant than the Ti-base group in monolithic zirconia partial implant-supported fixed prostheses. However, both groups had microgap values within the clinically acceptable range.

Micro-CT analysis and mechanical properties of low dimensional CFR-PEEK specimens additively manufactured by material extrusion

Material extrusion of thermoplastic polymers enables the realization of complex specific designs with high performance composites. The present study aims at evaluating the mechanical properties of carbon fiber-reinforced semi-crystalline thermoplastic polymer polyether ether ketone (CFR-PEEK) manufactured by material extrusion and correlating them with results obtained by micro-CT. Samples in the shape of small bars were provided by Kumovis (Munich, Germany). The determination of surface roughness and density was followed by three-point bending tests. To reveal the pore distribution as well as the fusion quality of CFR PEEK when applied with external forces, micro-CT scans were performed with an X-ray microscope before and after the mechanical test to localize the sites where the fracture is generated. The density of CFR-PEEK bars indicated that they had superior mechanical properties compared with our previous study on unfilled 3D printed PEEK (bending modulus: (5.4 ± 0.5) GPa vs. (1.05 ± 0.05) GPa to (1.48 ± 0.10) GPa; bending strength: (167 ± 11) MPa vs. (51 ± 15) to (193 ± 7) MPa). Micro-CT analyses revealed the local 3D-distribution of voids. Voids of 30 μm diameter are nearly spherical and make up the main part of the total porosity. The larger the voids, the more they deviate from a spherical shape. Significant lack-of-fusion voids are located between the deposited filaments. By growing and merging, they act as seeds for the forming fracture line in the region of the flexural specimens where the maximum local tensile stresses occurred under bending load. Our work provides a detailed analysis of printed PEEK with fiber additive and relates this with mechanical properties.

Bone regeneration in implant dentistry: Which are the factors affecting the clinical outcome?

The key factors that are needed for bone regeneration to take place include cells (osteoprogenitor and immune-inflammatory cells), a scaffold (blood clot) that facilitates the deposition of the bone matrix, signaling molecules, blood supply, and mechanical stability. However, even when these principles are met, the overall amount of regenerated bone, its stability over time and the incidence of complications may significantly vary. This manuscript provides a critical review on the main local and systemic factors that may have an impact on bone regeneration, trying to focus, whenever possible, on bone regeneration simultaneous to implant placement to treat bone dehiscence/fenestration defects or for bone contouring. In the future, it is likely that bone tissue engineering will change our approach to bone regeneration in implant dentistry by replacing the current biomaterials with osteoinductive scaffolds combined with cells and mechanical/soluble factors and by employing immunomodulatory materials that can both modulate the immune response and control other bone regeneration processes such as osteogenesis, osteoclastogenesis, or inflammation. However, there are currently important knowledge gaps on the biology of osseous formation and on the factors that can influence it that require further investigation. It is recommended that future studies should combine traditional clinical and radiographic assessments with non-invasive imaging and with patient-reported outcome measures. We also envisage that the integration of multi-omics approaches will help uncover the mechanisms responsible for the variability in regenerative outcomes observed in clinical practice.

Influence of abutment macro- and micro-geometry on morphologic and morphometric features of peri-implant connective tissue

OBJECTIVES

The aim of the present human observational study is to provide morphologic and morphometric analysis of peri-implant connective tissue next to abutments with divergent or convergent macro-geometry and different surface micro-characteristics.

MATERIALS AND METHODS

Thirty patients were rehabilitated with single implants in the posterior area and one out of three different healing abutments with a one-stage technique: machined divergent abutment (DIV-MAC), machined convergent abutment (CONV-MAC) or convergent abutment with ultrathin threaded surface (CONV-UTM). At 3 months postimplant insertion, peri-implant soft tissue was harvested; the following outcomes were investigated: histomorphometry (vertical width of connective and epithelial components) as detected by histology and polarized light; and connective tissue vertical width and 3D organization as detected by synchrotron-based high-resolution phase-contrast-based tomography (PhC-μCT).

RESULTS

Significant differences in connective tissue vertical dimension (aJE-AM) were found between DIV-MAC and both CONV-MAC and CONV-UTM, both by histology and PhC-μCT, with significantly higher values for the last two groups. Moreover, 2D histological analysis did not find significant differences in the junctional epithelium vertical dimension (PM-aJE). Importantly, PhC-μCT analysis revealed, at 3D level, significant greater amount and density of collagen bundles for CONV-UTM compared with the other two groups.

CONCLUSIONS

Convergent abutment profiles, regardless of their surface micro-geometry, seem to favor axial development of peri-implant connective tissue. Moreover, ultrathin threaded surfaces seem associated with denser and greater connective tissue organization, which might improve peri-implant soft tissue seal.

The ideal patient specific implant. Part II: An eight step checklist for maxillary class I, II Brown defects

Patient specific implants (PSI) though considered the next frontier in Maxillofacial Reconstruction, the gold standard for Brown I, II maxillary defects still remains autogenous reconstruction. The authors in their previous papers have standardised the design of Patient Specific Implants for Brown I, II mandibular defects. In this paper they attempt to standardise the design of PSI for Brown I,II maxillary defects using a scientifically optimised design which has passed through a stringent set of parameters. They aim to address the complications like wound dehiscence, poor dimensional accuracy and unoptimised biomechanics due to lack of standardisation thus impeding it's widespread acceptance among the scientific community. This study presents an eight step checklist to be followed for designing of an ideal standardised patient specific implant and can serve as a go-to guide for the operating and designing team.

Minimally Invasive Treatment of Lateral Incisors with Guided One-Piece or Two-Piece Titanium-Made Narrow Diameter Implants: A Retrospective Comparative Study with Up to Two Years Follow-Up

Restoring teeth with dental implants has become the gold standard in recent years, especially in the esthetic zone. However, limited amount of available bone as well as limited interdental space in the anterior zone may create problems for implant treatment. Narrow diameter implants (NDI) may be a treatment option to resolve the above-mentioned limitations and providing minimally invasive implant therapy without additional regenerative procedures. In this retrospective study, a comparison of clinical and radiographic outcomes between one-piece and two-piece titanium-made NDIs was done with the follow-up of two years after loading. Twenty-three NDI cases were analyzed, 11 in the one-piece implant group (group one) and 12 in the two-piece implant group (group two). The outcomes were implant and prosthetic failures, any complications occurred, peri-implant bone level changes, and as well as the Pink Esthetic score. No implant or prosthetic failures, as well as, no complications were reported at the two-year follow-up examination. At the same time the marginal bone loss was 0.23 ± 0.11 in the group one and 0.18 ± 0.12 in the group two. Difference was not statistically significant (p = 0.3339). The Pink Esthetic Score, recorded two years after definitive loading, was 12.6 ± 0.97 in the group one and 12.2 ± 0.92 in the group two, with no statistically significant difference between groups (p = 0.3554). With the limitations of the present study, including the small sample size and short follow-up, it is possible to conclude that either one and two-piece NDI can be successfully used to restore lateral incisors with comparable results within the two years of follow-up.

The burden of diabetes on the soft tissue seal surrounding the dental implants

Soft tissue seal around implant prostheses is considered the primary barrier against adverse external stimuli and is a critical factor in maintaining dental implants' stability. Soft tissue seal is formed mainly by the adhesion of epithelial tissue and fibrous connective tissue to the transmembrane portion of the implant. Type 2 diabetes mellitus (T2DM) is one of the risk factors for peri-implant inflammation, and peri-implant disease may be triggered by dysfunction of the soft tissue barrier around dental implants. This is increasingly considered a promising target for disease treatment and management. However, many studies have demonstrated that pathogenic bacterial infestation, gingival immune inflammation, overactive matrix metalloproteinases (MMPs), impaired wound healing processes and excessive oxidative stress may trigger poor peri-implant soft tissue sealing, which may be more severe in the T2DM state. This article reviews the structure of peri-implant soft tissue seal, peri-implant disease and treatment, and moderating mechanisms of impaired soft tissue seal around implants due to T2DM to inform the development of treatment strategies for dental implants in patients with dental defects.

Physiopathology of peri-implant diseases

BACKGROUND

Peri-implant health is characterized by the absence of clinical signs of soft tissue inflammation. Peri-implant diseases are initiated by the presence of bacterial biofilms and share a similar etiology as that involved in the onset of periodontal diseases.

PURPOSE

To summarize available evidence on the physiopathology of peri-implant diseases with emphasis on similarities and differences with periodontal diseases.

MATERIALS AND METHODS

Evidence on the biologic mechanisms involved in the pathogenesis of peri-implant mucositis and peri-implantitis were explored in the recent scientific literature.

RESULTS

Findings of studies in animals and in humans indicate that experimental peri-implant mucositis leads to a larger inflammatory connective tissue infiltrate and to a higher frequency of bleeding sites around implants compared with teeth. Tissue destruction at experimental peri-implantitis sites is more pronounced compared with that at experimental periodontitis sites. Although human periodontitis and peri-implantitis lesions share similarities with respect to etiology and clinical features, they represent distinct entities from a physiopathologic point of view.

CONCLUSIONS

Diagnosis of peri-implant health requires a clinical examination to confirm absence of peri-implant soft tissue inflammation. In order to make a correct diagnosis and select the appropriate therapeutic steps to manage peri-implant diseases, knowledge of their pathogenetic mechanisms is required.

Gene-activated titanium implants for gene delivery to enhance osseointegration

Osseointegration is the direct and intimate contact between mineralized tissue and titanium implant at the bone-implant interface. Early establishment and stable maintenance of osseointegration is the key to long-term implant success. However, in patients with compromised conditions such as osteoporosis and patients beginning early load-bearing activities such as walking, lower osseointegration around titanium implants is often observed, which might result in implant early failure. Gene-activated implants show an exciting prospect of combining gene delivery and biomedical implants to solve the problems of poor osseointegration formation, overcoming the shortcomings of protein therapy, including rapid degradation and overdose adverse effects. The conception of gene-activated titanium implants is based on "gene-activated matrix" (GAM), which means scaffolds using non-viral vectors for in situ gene delivery to achieve a long-term and efficient transfection of target cells. Current preclinical studies in animal models have shown that plasmid DNA (pDNA), microRNA (miRNA), and small interference RNA (siRNA) functionalized titanium implants can enhance osseointegration with safety and efficiency, leading to the expectation of applying this technique in dental and orthopedic clinical scenarios. This review aims to comprehensively summarize fabrication strategies, current applications, and futural outlooks of gene-activated implants, emphasizing nucleic acid targets, non-viral vectors, implant surface modification techniques, nucleic acid/vector complexes loading strategies.

Topography-mediated immunomodulation in osseointegration; Ally or Enemy

Osteoimmunology is at full display during endosseous implant osseointegration. Bone formation, maintenance and resorption at the implant surface is a result of bidirectional and dynamic reciprocal communication between the bone and immune cells that extends beyond the well-defined osteoblast-osteoclast signaling. Implant surface topography informs adherent progenitor and immune cell function and their cross-talk to modulate the process of bone accrual. Integrating titanium surface engineering with the principles of immunology is utilized to harness the power of immune system to improve osseointegration in healthy and diseased microenvironments. This review summarizes current information regarding immune cell-titanium implant surface interactions and places these events in the context of surface-mediated immunomodulation and bone regeneration. A mechanistic approach is directed in demonstrating the central role of osteoimmunology in the process of osseointegration and exploring how regulation of immune cell function at the implant-bone interface may be used in future control of clinical therapies. The process of peri-implant bone loss is also informed by immunomodulation at the implant surface. How surface topography is exploited to prevent osteoclastogenesis is considered herein with respect to peri-implant inflammation, osteoclastic precursor-surface interactions, and the upstream/downstream effects of surface topography on immune and progenitor cell function.

The role of foreign body response in peri-implantitis: What is the evidence?

Historically, there has been broad consensus that osseointegration represents a homeostasis between a titanium dental implant and the surrounding bone, and that the crestal bone loss characteristic of peri-implantitis is a plaque-induced inflammatory process. However, this notion has been challenged over the past decade by proponents of a theory that considers osseointegration an inflammatory process characterized by a foreign body reaction and peri-implant bone loss as an exacerbation of this inflammatory response. A key difference in these two schools of thought is the perception of the relative importance of dental plaque in the pathogenesis of crestal bone loss around implants, with obvious implications for treatment. This review investigates the evidence for a persistent foreign body reaction at osseointegrated dental implants and its possible role in crestal bone loss characteristic of peri-implantitis. Further, the role of implant-related material release within the surrounding tissue, particularly titanium particles and corrosion by-products, in the establishment and progression in peri-implantitis is explored. While it is acknowledged that these issues require further investigation, the available evidence suggests that osseointegration is a state of homeostasis between the titanium implant and surrounding tissues, with little evidence that a persistent foreign body reaction is responsible for peri-implant bone loss after osseointegration is established. Further, there is a lack of evidence for a unidirectional causative role of corrosion by-products and titanium particles as possible non-plaque related factors in the etiology of peri-implantitis.

Effect Morphology and Surface Treatment of the Abutments of Dental Implants on the Dimension and Health of Peri-Implant Biological Space

Statement of the problem: The gingival configuration around implant abutments is of paramount importance for preserving the underlying marginal bone, and hence for the long-term success of dental implants. Objective: The objective was to study, clinically and histologically, the effects of the change in the morphology of abutments connected to the endosseous implant, and of their surface treatment. In particular, the objective was to ascertain the effect of changing the shape of the transepithelial pillar and the treatment of its surface on the dimensions, quality and health of the components of the peri-implant biological space, such as the dimensions of the epithelial and connective tissues of the biological space, the concentration of inflammatory cells and the density of collagen fibers. Methods: A clinical trial of 10 patients with a totally edentulous maxilla, who had four implants (IPX4010_GALIMPLANT®, Sarria, Spain) inserted in the area of the first and second molars on both sides with computer-guided implant surgery, was conducted with the final purpose of assessing the quality of the peri-implant soft tissue attachment around the transepithelial abutments which were employed (aesthetic machined (RM), aesthetic anodized (RA), slim machined (SM) and slim anodized (SA)). At 8 weeks and following the collection of the samples (removal of the implant-abutment assembly with its surrounding hard and soft tissue) and their processing for subsequent histological and histomorphometric analysis in order to study the dimensions, quality and health of the peri-implant soft tissue area, the variables previously mentioned were determined according to the aims of the study. By using appropriate diameter trephine in order to obtain a useful fringe of soft tissue around the transepithelial pillars, ANOVA and chi-square tests were performed. Results: The SPSS statistical analysis ANOVA results revealed that the machined slim abutments have a better performance considering the variables analyzed with epithelial and connective attachment heights of 1.52 mm and 2.3 mm, respectively, and that connective density (density of collagen fibers) was high at 85.7% of the sample size affected by the design for the slim abutments and 92.9% of the high-density sample size affected by the surface treatment for the machined surface. Conclusions: All variables studied, despite the small sample size, showed the superiority of the slim machined abutment among the four groups.

The Potential Role of a Surface-Modified Additive-Manufactured Healing Abutment on the Expression of Integrins α2, β1, αv, and β6 in the Peri-Implant Mucosa: A Preliminary Human Study

The stability of peri-implant soft tissues is essential for long-term success. Integrins play a vital role in biological processes through developing and maintaining cell interactions; however, few studies have evaluated the effects of modifications to abutment surfaces on cell adhesion across integrin expression. Therefore, this pilot study assessed the influence of different surface topographies of titanium healing abutments prepared by additive manufacturing (AM) on the gene expression levels of the integrin subunits α2, β1, αv, and β6 in the human peri-implant mucosa. Thirteen healthy adults were included. Depending on the number of required implants, the subjects were distributed in different groups as a function of healing abutment topography: group 1 (fully rough surface); group 2 (upper machined + lower rough); group 3 (rough upper surface + lower machined); group 4 (fully machined). A total of 40 samples (n = 10/group) of the peri-implant mucosa around the abutments were collected 30 days after implant placement, and subsequently, the gene expression levels were evaluated using real-time PCR. The levels of gene expression of β1-subunit integrin were upregulated for individuals receiving fully rough surface abutments compared with the other surface topographies (p < 0.05). However, the healing abutment topography did not affect the gene expression levels of the α2, αv, and β6 integrin subunits in the human peri-implant mucosa (p > 0.05). This preliminary study suggested that controlled modifications of the surface topography of titanium healing abutments produced by AM may influence the quality of the peri-implant mucosa in the early stages of the soft tissue healing process.

Use of Xenogenic Collagen Matrices in Peri-Implant Soft Tissue Volume Augmentation: A Critical Review on the Current Evidence and New Technique Presentation

Plastic peri-implant surgical procedures aiming to increase soft tissue volume around dental implants have long been well-described. These are represented by: pedicle soft tissue grafts (rotational flap procedures and advanced flap procedures) and free soft tissue grafts (epithelialized, also called free gingival graft (FGG), and non-epithelialized, also called, connective tissue graft (CTG) or a combination of both. To bypass the drawback connected with autologous grafts harvesting, xenogenic collagen matrices (XCM)s and collagen-based matrices derived from porcine dermis (PDXCM)s have been introduced, as an alternative, in plastic peri-implant procedures. Aim: This review is aimed to evaluate and to critically analyze the available evidence on the effectiveness of XCMs and PDXCMs in soft tissue volume augmentation around dental implants. Moreover, a clinical case with a new soft tissue grafting procedure technique (Guided Soft Tissue Regeneration, GSTR) is presented. Material and Methods: An electronic search was performed on the MEDLINE database, SCOPUS, Cochrane Library and Web of Science. The electronic search provided a total of 133 articles. One hundred and twenty-eight not meeting the inclusion criteria were excluded. Seven articles of human randomized clinical trials were selected. A total number of 108 patients were treated with CTG, and 110 patients with XCM. Results: in peri-implant soft tissue augmentation procedures, XCMs seem an effective alternative to CTGs, associated with lower patient morbidity and lower operative times.

Three interfaces of the dental implant system and their clinical effects on hard and soft tissues

Anatomically, the human tooth has structures both embedded within and forming part of the exterior surface of the human body. When a tooth is lost, it is often replaced by a dental implant, to facilitate the chewing of food and for esthetic purposes. For successful substitution of the lost tooth, hard tissue should be integrated into the implant surface. The microtopography and chemistry of the implant surface have been explored with the aim of enhancing osseointegration. Additionally, clinical implant success is dependent on ensuring that a barrier, comprising strong gingival attachment to an abutment, does not allow the infiltration of oral bacteria into the bone-integrated surface. Epithelial and connective tissue cells respond to the abutment surface, depending on its surface characteristics and the materials from which it is made. In particular, the biomechanics of the implant-abutment connection structure (i.e., the biomechanics of the interface between implant and abutment surfaces, and the screw mechanics of the implant-abutment assembly) are critical for both the soft tissue seal and hard tissue integration. Herein, we discuss the clinical importance of these three interfaces: bone-implant, gingiva-abutment, and implant-abutment.

A Review of Biomimetic Topographies and Their Role in Promoting Bone Formation and Osseointegration: Implications for Clinical Use

The use of metallic and polymeric materials for implants has been increasing over the past decade. This trend can be attributed to a variety of factors including a significant increase in basic science research focused on implant material characteristics and how various surface modifications may stimulate osseointegration and, ultimately, fusion. There are many interbody fusion devices and dental implants commercially available; however, detailed information about their surface properties, and the effects that various materials and surface modifications may have on osteogenesis, is lacking in the literature. While the concept of bone-implant osseointegration is a relatively recent addition to the spine fusion literature, there is a comparatively large body of literature related to dental implants. The purpose of this article is to summarize the science of surface modified bone-facing implants, focusing on biomimetic material chemistry and topography of titanium implants, to promote a better understanding of how these characteristics may impact bone formation and osseointegration. This manuscript has the following aspects: highlights the role of titanium and its alloys as potent osteoconductive bioactive materials; explores the importance of biomimetic surface topography at the macro-, micro- and nano-scale; summarizes how material surface design can influence osteogenesis and immune responses in vitro; focuses on the kinds of surface modifications that play a role in the process. Biomimetic surface modifications can be varied across many clinically available biomaterials, and the literature supports the hypothesis that those biomaterial surfaces that exhibit physical properties of bone resorption pits, such as roughness and complex hierarchical structures at the submicron and nanoscale, are more effective in supporting osteoblast differentiation in vitro and osteogenesis in vivo.

Impaired dental implant osseointegration in rat with streptozotocin-induced diabetes

OBJECTIVE

Few studies have reported on the impact of oxidative stress on the dental implant failure. The aim of this study was to investigate the impact of hyperglycemia-induced oxidative stress on dental implant osseointegration in diabetes mellitus (DM).

METHODS

Acid-treated titanium implants were bilaterally placed in the maxillary alveolar ridge of streptozotocin-induced diabetic (DM group) and control rats after extraction of first molars. Histological analysis and micro-push-out test were performed 4 weeks after surgery. Oxidative stress and osteogenic markers in the surrounding bone were quantified by real-time polymerase chain reaction. In the in vitro study, rat bone marrow-derived mesenchymal stem cells (BMMSCs) were cultured on acid-treated titanium discs in a high-glucose (HG) or normal environment. Intracellular reactive oxygen species (ROS), cell proliferation, alkaline phosphatase (ALP) activity, and extracellular calcification were evaluated following antioxidant treatment with N-acetyl-L-cysteine (NAC).

RESULTS

The implant survival rate was 92.9% and 75.0% in control and DM group, respectively. Bone-implant contact and push-out loads were significantly lower in the DM group. Expression of superoxide dismutase 1 at the mRNA level and on immunohistochemistry was significantly lower in the DM group. In vitro experiments revealed that the HG condition significantly increased ROS expression and suppressed the proliferation and extracellular calcification of BMMSCs, while NAC treatment significantly restored ROS expression, cell proliferation, and calcification. The ALP activity of both groups was not significantly different.

CONCLUSION

In diabetes, high-glucose-induced oxidative stress downregulates proliferation and calcification of BMMSCs, impairing osseointegration and leading to implant failure.

Carbon Nanomaterials Modified Biomimetic Dental Implants for Diabetic Patients

Dental implants are used broadly in dental clinics as the most natural-looking restoration option for replacing missing or highly diseased teeth. However, dental implant failure is a crucial issue for diabetic patients in need of dentition restoration, particularly when a lack of osseointegration and immunoregulatory incompetency occur during the healing phase, resulting in infection and fibrous encapsulation. Bio-inspired or biomimetic materials, which can mimic the characteristics of natural elements, are being investigated for use in the implant industry. This review discusses different biomimetic dental implants in terms of structural changes that enable antibacterial properties, drug delivery, immunomodulation, and osseointegration. We subsequently summarize the modification of dental implants for diabetes patients utilizing carbon nanomaterials, which have been recently found to improve the characteristics of biomimetic dental implants, including through antibacterial and anti-inflammatory capabilities, and by offering drug delivery properties that are essential for the success of dental implants.

Organotypic in vitro block culture model to investigate tissue-implant interface. An experimental study on pig mandible

In vitro studies of implant-tissue attachment are primarily based on two-dimensional cell culture models, which fail to replicate the three-dimensional native human oral mucosal tissue completely. Thus, the present study aimed to describe a novel tissue culture model using pig mandibular block including alveolar bone and gingival soft tissues to evaluate the tissue attachment to titanium implant provided with hydrothermally induced TiO₂ coating. Tissue attachment on TiO₂ coated and non-coated implants were compared. Ti-6Al-4V alloy posts were used to function as implants that were inserted in five pig mandibles. Implants were delivered with two different surface treatments, non-coated (NC) titanium and hydrothermal induced TiO₂ coated surfaces (HT). The tissue-implant specimens were cultured at an air/liquid interface for 7 and 14 days. The tissue-implant interface was analyzed by histological and immunohistochemical stainings. The microscopic evaluation suggests that pig tissue explants established soft and hard tissue attachment to both implant surfaces. The epithelial cells appeared to attach to the coated implant. The epithelium adjacent to the implant abutment starts to change its phenotype during the early days of the healing process. New bone formation was seen within small pieces of bone in close contact with the coated implant. In conclusion, this in vitro model maintains the viability of pig tissue and allows histologically and immunohistochemically evaluate the tissue-implant interface. HT-induced TiO₂ coating seems to have a favorable tissue response. Moreover, this organotypic tissue culture model is applicable for further studies with quantitative parameters to evaluate adhesion molecules present at the implant-tissue interface.

Innovative implant design for continuous implant stability: A mechanical and histological experimental study in the iliac crest of goats

OBJECTIVES

this in vivo study reports on mechanical torque data as well as the biological evaluation up to 6 weeks after placement of implants with a unique wide knife thread design in a goat iliac crest model. We hypothesized that implants with this thread design would show substantial primary stability at a continuous level toward secondary stability.

METHODS

64 MegaGen Anyridge® implants were used with diameters 3.5 mm, 4.0 mm, 5.0 mm and 6.0 mm (n = 8). Implants were placed monocortically in the iliac crest of 16 healthy female Saanen goats, both on the right (for torque measurements) and left side (for histology/-morphometry). Torque-in at implant installation and torque-out at 2 and 6 weeks of implantation was measured, as well as bone-to-implant contact (BIC) and bone-area between the screw threads (BA).

RESULTS

Histology showed intimate bone-to-implant contact with a maturating trabecular structure between 2 and 6 weeks. Torque values showed a dependency on implant diameter. For all implant diameters, torque-in values were similar to torque-out values at 2 weeks. At 6 weeks however, all torque-out values were significantly increased. BIC and BA percentages showed similar values for all diameters at both 2 and 6 weeks.

CONCLUSIONS

These results prove the absence of a lag-phase in implant stability for MegaGen Anyridge® implants in the goat iliac crest model. The increased torque-out values at 6 weeks without increasing BIC and BA percentages correlate with the observed maturation of bone-to-implant contact quality over time.

CLINICAL SIGNIFICANCE

It is a challenge to optimize implants with continuous primary stability and rapid transition into secondary stability to minimize the duration of the lag-phase. The results of this study prove the absence of a lag-phase in implant stability for MegaGen Anyridge® implants. Consequently, the data from this work are important for the treatment of individual patients 'translating' these findings into clinical implant procedures.

Soft tissue integration of different abutment surfaces: An experimental study with histological analysis

OBJECTIVE

To evaluate whether abutment surface and surface bio-activation have an effect on soft tissue morphogenesis.

MATERIALS AND METHODS

36 patients (36 implants) were included. Abutments were randomly divided into 4 groups (n = 9): Smooth Surface-MAChined (MAC), Ultrathin Threaded Microsurface (UTM), MAC Plasma of Argon activated (Plasma-MAC), and UTM Plasma of Argon activated (Plasma-UTM). After 2 months of healing, soft tissue samples were collected and prepared for histological analysis. The margin of the peri-implant mucosa (PM), the apical extension of the barrier epithelium (aJE), and the apical location of the abutment (AM) were identified. Significances of differences among groups were tested by means of the Kruskal-Wallis test and between pairs of results by means of the Mann-Whitney test.

RESULTS

The mean (SD) vertical dimension of the mucosa was 2.5mm (1.0), including a connective tissue portion (CTP) of 0.8mm (0.8) in the MAC group; 3.6mm (0.2) with a CTP of 1.6mm (0.4) in the Plasma-MAC group; 3.2mm (1.0), with a CPT of 0.5mm (0.6) in the UTM; and 3.3mm (0.8), with a CPT of 0.9mm (0.7) in the Plasma-UTM group. Statistically significant differences were observed in the aJE-AM height and PM-aJE profile among the four experimental groups (p = .042 and p = .039, respectively). The Mann-Whitney test indicated differences between the Plasma-abutments and the untreated abutments both for PM-AM (p = .025) and AjE-AM (p = .021). The differences appeared more evident when the preoperative soft tissue thickness was ≤2mm.

CONCLUSIONS

Within its limits, the study demonstrated a favorable effect of the plasma treatment on the connective tissue portion tissues. Plasma-MAC group highlighted the best performance. This behavior appeared strictly correlated with the soft tissue thickness.

Titanium implant alters the effect of zoledronic acid on the behaviour of endothelial cells

OBJECTIVES

To evaluate the effect of zoledronic acid (ZA) on human umbilical vein endothelial cells (HUVECs) attached to different surfaces.

MATERIALS AND METHODS

A total of three groups were evaluated in this study: sandblasting and acid etching (SLA) + HUVECs; mechanically polished (MP) + HUVECs; and plastic cell culture plates + HUVECs. Scanning electron microscopy, energy-dispersive X-ray spectroscopy, surface roughness and water contact angle were tested for titanium surface characterisation. ZA was added at different concentrations (0, 1, 10, 50 and 100 μM). Cell adhesion, proliferation, viability, apoptosis and gene expression were evaluated.

RESULTS

Mechanically polished and SLA surfaces showed negative effects on cell adhesion and proliferation and promoted cell apoptosis with 100 μM ZA (p < .05). The highest expression of intercellular adhesion molecule-1 (ICAM-1) and angiopoietin-1 was found on SLA surfaces (p < .01). The lowest expression of platelet-endothelial cell adhesion molecule-1 and ICAM-1 was found on MP surfaces (p < .05). A significant decrease in von Willebrand factor was detected on MP and SLA surfaces (p < .001).

CONCLUSIONS

Zoledronic acid has an anti-angiogenic effect on HUVECs attached to titanium implants, while the SLA surface might stimulate HUVECs to express angiogenic and adhesive factor genes despite ZA treatment.

Photobiomodulation using LLLT and LED of cells involved in osseointegration and peri-implant soft tissue healing

This study evaluated the influence of photobiomodulation (PBM) using low-level laser therapy (PBM/LLLT) or light-emitting diode (PBM/LED) therapy on peri-implant tissue healing. A laboratory model was used to assess the adhesion and metabolism of osteoblasts (SaOs-2), human gingival fibroblasts (HGF), and normal oral keratinocytes (NOK) seeded on a titanium (Ti) surface. After seeding the cells on disks of Ti placed in wells of 24-well plates, three irradiations were performed every 24 h at energy density of 3 J/cm². For PBM/LLLT, a LaserTABLE device was used with a wavelength of 780 nm and 25 mW, while for PBM/LED irradiation, a LEDTABLE device was used at 810 nm, 20 mW, at a density of 3 J/cm². After irradiations, the number of cells (NC) attached and spread on the Ti surface, cell viability (CV), total protein (TP), and collagen (Col) synthesis were assessed. Alkaline phosphate activity (ALP) was evaluated only for SaOs-2. Data were submitted to ANOVA complemented by Turkey statistical tests at a 5% significance level. PBM significantly increased adherence of NOK to the Ti surface, while no significant effect was observed for SaOs-2 and HGF. PBM positively affected CV, as well as Col and TP synthesis, in distinct patterns according to the cell line. Increased ALP activity was observed only in those cells exposed to PBM/LLLT. Considering cell specificity, this investigation reports that photobiomodulation with low-power laser and LED at determined parameters enhances cellular functions related to peri-implant tissue healing in a laboratory model.

Race to invade: Understanding soft tissue integration at the transmucosal region of titanium dental implants

OBJECTIVES

The success of a dental implant system not only depends on appropriate osseointegration at the bone-implant interface, but also on robust soft-tissue integration (STI)/muco-integration at the transmucosal region. However, numerous studies have reported that the STI quality of conventional smooth and bio-inert titanium-based transmucosal components is significantly inferior to that of natural teeth, which may compromise the long-term success of implant restorations. In this review article, we discuss the structural and histological characteristics of peri-implant tissues; compare the roles of various cells residing in the transmucosal region and explore the material-based challenges that must be addressed to achieve early establishment and long-term maintenance of STI.

METHODS

This extensive review article critically compares and contrasts the findings from articles published in the domain of 'soft-tissue integration around Ti dental implants'.

RESULTS

Histological characteristics, including poorer epithelial attachment and absence of direct collagen-implant/abutment integration, are responsible for the inferior STI strength around dental implants/abutments. Furthermore, various cellular functions during STI establishment and maturation at the abutment-mucosa interface must be modulated to achieve early STI. Moreover, we discuss and detail the challenges of achieving robust STI, including the presence of oral bacterial milieu, as well as material and corrosion related issues. Finally, research challenges towards achieving and maintaining robust STI are discussed, targeting the future directions to enhance the long-term survival of implant restorations.

SIGNIFICANCE

Based on its histological characteristics, STI on current implant/abutment surfaces is suboptimal compared to the periodontal attachment found at teeth, making implants potentially more susceptible to disease initiation and progression. To obtain stable STI at the trasmucosal region, it is essential for future studies to design customized implant systems, with enhanced surface bioactivity and tailorable therapeutic capacity, which can improve the long-term success of implant restorations, especially in compromised conditions.

Time-dependent reactive oxygen species inhibit Streptococcus mutans growth on zirconia after a helium cold atmospheric plasma treatment

As an efficient strategy for the modification of material surfaces, cold atmospheric plasma (CAP) has been used in dentistry to improve hard and soft tissue integration of dental implant materials. We previously found the Streptococcus mutans growth was inhibited on the surface of zirconia implant abutment after a 60-second helium cold atmospheric plasma treatment. However, the mechanism of bacterial growth inhibition on CAP-treated zirconia has not been fully understood. The duration of bacterial inhibition effectiveness on CAP-treated zirconia has also been insufficiently examined. In this work, we assume that reactive oxygen species (ROS) are the primary cause of bacterial inhibition on CAP-treated zirconia. The ROS staining and an ROS scavenger were utilized to evaluate the bacterial intracellular ROS level, and to determine the role of ROS in bacterial growth inhibition when seeded on CAP-treated zirconia. The time-dependent effectiveness of CAP treatment was determined by changes in surface characteristics and antibacterial efficacy of zirconia with different storage times after CAP treatment. This study confirmed that the presence of reactive oxygen species on the zirconia surface after CAP treatment inhibits the growth of Streptococcus mutans on the material surface. Although the antibacterial efficacy of the 60-second CAP-treated zirconia decreased over time, there were fewer bacteria on the treated surface than those on the untreated surface after 14 days.

In Situ Regulation of Macrophage Polarization to Enhance Osseointegration Under Diabetic Conditions Using Injectable Silk/Sitagliptin Gel Scaffolds

As a chronic inflammatory disease, diabetes mellitus creates a proinflammatory microenvironment around implants, resulting in a high rate of implant loosening or failure in osteological therapies. In this study, macroporous silk gel scaffolds are injected at the bone-implant interface for in situ release of sitagliptin that can regulate macrophage response to create a prohealing microenvironment in diabetes mellitus disease. Notably, it is discovered that sitagliptin induces macrophage polarization to the M2 phenotype and alleviates the impaired behaviors of osteoblasts on titanium (Ti) implants under diabetic conditions in a dose-dependent manner. The silk gel scaffolds loaded with sitagliptin elicite a stronger recruitment of M2 macrophages to the sites of Ti implants and a significant promotion of osteointegration, as compared to oral sitagliptin administration. The results suggest that injectable silk/sitagliptin gel scaffolds can be utilized to modulate the immune responses at the bone-implant interface, thus enhancing bone regeneration required for successful implantation of orthopedic and dental devices in diabetic patients.

Hydrophilic titanium surface modulates early stages of osseointegration in osteoporosis

OBJECTIVE

Using a mouse osteoporotic model, this study aimed to determine the influence of hydrophilic titanium surfaces on gene expression and bone formation during the osseointegration process.

BACKGROUND

Based on the previous evidence, it is plausible to assume that osteoporotic bone has a different potential of bone healing. Therefore, implant surface modification study that aims at enhancing bone formation to further improve short- and long-term clinical outcomes in osteoporosis is necessary.

MATERIAL AND METHODS

Fifty female, 3-month-old mice were included in this study. Osteoporosis was induced by ovariectomy (OVX, test group) in 25 mice. The further 25 mice had ovaries exposed but not removed (SHAM, control group). Seven weeks following the ovariectomy procedures, one customized implant (0.7 × 8 mm) of each surface was placed in each femur for both groups. Implants had either a hydrophobic surface (SAE) or a hydrophilic treatment surface (SAE-HD). Calcium (Ca) and phosphorus (P) content was measured by energy-dispersive X-ray spectroscopy (EDS) after 7 days. The femurs were analyzed for bone-to-implant contact (BIC) and bone volume fraction (BV) by nano-computed tomography (nano-CT) after 14 and 28 days. Same specimens were further submitted to histological analysis. Additionally, after 3 and 7 days, implants were removed and cells were collected around the implant to access gene expression profile of key osteogenic (Runx2, Alp, Sp7, Bsp, Sost, Ocn) and inflammatory genes (IL-1β, IL-10, Tnf-α, and Nos2) by qRT-PCR assay. Statistical analysis was performed by ANOVA and paired t test with significance at P < .05.

RESULTS

The amount of Ca and P deposited on the surface due to the mineralization process was higher for SAE-HD compared to SAE on the intra-group analysis. Nano-CT and histology revealed more BV and BIC for SAE-HD in SHAM and OVX groups compared to SAE. Analysis in OVX group showed that most genes (ie, ALP, Runx2) involved in the bone morphogenetic protein (BMP) signaling were significantly activated in the hydrophilic treatment.

CONCLUSION

Both surfaces were able to modulate bone responses toward osteoblast differentiation. SAE-HD presented a faster response in terms of bone formation and osteogenic gene expression compared to SAE. Hydrophilic surface in situations of osteoporosis seems to provide additional benefits in the early stages of osseointegration.

Effect of Multi-Phosphonate Coating of Titanium Surfaces on Osteogenic Potential

The aim of this study was to evaluate the impact of a novel multi-phosphonate (MP) coating strategy of dental implant surfaces on the expression of osteogenesis-related factors in vitro. MG-63 human osteoblast-like cells, bone marrow mesenchymal stem cells (BM-MSCs), and human periodontal ligament stem cells (hPDLSCs) were cultured separately on titanium disks with and without MP coating. Cell attachment was visualized by focal adhesion and actin cytoskeleton staining. The proliferation and gene expression of the markers related to osteogenesis and bone turnover were measured after 48 and 120 h of cell culture. Actin cytoskeleton assembly and focal adhesion were similar between test surfaces within each cell type but differed from those on tissue culture plastic (TCP). The proliferation of MG-63 cells and PDLSCs was comparable on all surfaces, while BM-MSCs showed an increase on tissue culture plastic (TCP) versus titanium. The gene expression of osteoprotegerin and receptor activator of nuclear factor-kappa B ligand was higher in MG-63 cells grown on MP-coated surfaces. At the same time, osteocalcin was decreased compared to the other surfaces. Collagen type I gene expression after 120 h was significantly lower in hPDLSCs cultivated on MP-coated surfaces. Within the limitations of this study, MP coating on titanium surfaces might have a slight beneficial effect on bone turnover in vitro.