Vapor-phase linker exchange of metal-organic frameworks

Green and high-yield synthesis of bimetallic zeolitic imidazolate framework-67 for efficient catalytic CO2 cycloaddition

Metal-organic frameworks (MOFs) such as ZIF-67 have been widely studied. Incorporating multi-bimetals into ZIF-67 is a strategic approach to leverage unique properties and address the limitations of traditional single metals in ZIF-67. Herein, an environmentally friendly solid-solid thermal (SST) method is developed to simultaneously incorporate heterometals (Cu, Fe, Ru, Pd, Mn, and Ni) into the ZIF structure, referred to as M@ZIF-67. The synthesis occurs in a single step by utilizing thermally treated mixed solid precursors of multi-bimetals and imidazole ligands without additional agents or solvents, which is an innovative green route for preparing multi-bimetal ZIFs. Multiple techniques confirm that heterometals are homogeneously and uniformly distributed and have a precise metal content in the iso-structure of ZIF-67. Interestingly, synthesizing M@ZIF-67 through the SST method achieves a scalable and high yield. Furthermore, M@ZIF-67 exhibits a precise heterometal content, which plays a crucial role in enhancing its catalytic performance in CO2 cycloaddition, surpassing results obtained using traditional ZIF-67.

A Development and Comparison Study of PVDF Membranes Enriched by Metal-Organic Frameworks

This study is concerned with the research and development of nanofibrous hybrid materials functioning as membranes composed of polyvinylidene fluoride (PVDF) polymer and enriched with metal-organic frameworks (MOFs) as dopants for the adsorption and detection of gases, dyes, and heavy metals in wastewater. Several types of nanofiber composites are fabricated by electrostatic spinning. The prepared samples and their chemical, optical, and material properties are analyzed. Subsequently, the preliminary investigation of dye removal is conducted. Accordingly, the design and investigation of these nanofibrous structures may contribute to addressing critical environmental and technological challenges.

Introducing halogen-bonded gates into zeolitic frameworks for efficient benzene/cyclohexene/cyclohexane separation

The separation of C6 cyclic hydrocarbons (benzene, cyclohexene, and cyclohexane) is one of the most challenging chemical processes in the petrochemical industry. Herein, we design and synthesize a new SOD-topology metal azolate framework (MAF) with aperture gating behaviour controlled by C-Br⋯N halogen bonds, which exhibits distinct temperature- and guest-dependent adsorption behaviours for benzene/cyclohexene/cyclohexane. More importantly, the MAF enables the efficient purification of benzene from its binary and ternary mixtures (selectivity up to 113 ± 2; purity up to 98% +), which is the highest record for benzene/cyclohexane/cyclohexene separation to date. Single-crystal diffraction analyses and computational simulations revealed that halogen bonds play a critical role in the gating and diffusion process, which is the first example of halogen-bonding controlled gating for highly effective adsorptive separation.

Directly Gel-Thermal Processing of Linker-Mixed Crystal-Glass Composite Membranes for Sorption-Preferential Gas Separation

Membrane processes are promising for energy-saving industrial applications. However, efficient separation for some valuable gas mixtures with similar characteristics, such as CH4/N2 and O2/N2, remains extremely challenging. Metal-organic framework (MOF) membranes have been attracting intensive attention for gas sieving, but it is difficult to manufacture MOF membranes in scalability and precisely tune their transport property. In this study, Gel-thermal processing of linker-mixed MOF crystal-glass composite membranes is reported directly, with the mechanism of adjusting metal-linker bond strengths and angles to disrupt long-range periodicity of MOFs and promote glass phase formation, for sharply sorption-preferential gas separation. This strategy can be realized by using a simple, solvent/precursor-less, and cost-effective gel-thermal approach with two steps of gel coating and thermal conversion, thereby constructing crystal-glass composite membranes in a controllable, processable, versatile, and environmentally friendly route. Moreover, the mixed linkers enable preferential gas affinities and the ultramicroporous glasses can eliminate any membrane defects. The membranes exhibit outstanding gas separation performance for the challenging systems of CH4/N2 and O2/N2, with mixture selectivities up to 9.3 and 9.6, respectively, far exceeding those of polymer, MOF, and mixed-matrix membranes. The study provides an available route for architecting high-performance membranes for gas separations.

Development of the design and synthesis of metal-organic frameworks (MOFs) - from large scale attempts, functional oriented modifications, to artificial intelligence (AI) predictions

Owing to the exceptional porous properties of metal-organic frameworks (MOFs), there has recently been a surge of interest, evidenced by a plethora of research into their design, synthesis, properties, and applications. This expanding research landscape has driven significant advancements in the precise regulation of MOF design and synthesis. Initially dominated by large-scale synthesis approaches, this field has evolved towards more targeted functional modifications. Recently, the integration of computational science, particularly through artificial intelligence predictions, has ushered in a new era of innovation, enabling more precise and efficient MOF design and synthesis methodologies. The objective of this review is to provide readers with an extensive overview of the development process of MOF design and synthesis, and to present visions for future developments.

Accurate stacking engineering of MOF nanosheets as membranes for precise H2 sieving

Two-dimensional (2D) metal-organic framework (MOF) nanosheet membranes hold promise for exact molecular transfer due to their structural diversity and well-defined in-plane nanochannels. However, achieving precise regulation of stacking modes between neighboring nanosheets in membrane applications and understanding its influence on separation performance remains unrevealed and challenging. Here, we propose a strategy for accurately controlling the stacking modes of MOF nanosheets via linker polarity regulation. Both theoretical calculations and experimental results demonstrate that a high linker polarity promotes neighboring nanosheets to a maximum AB stacking due to steric hindrance effects, leading to a controlled effective pore size of the membrane and consequently to improved molecular sieving. Among series of CuBDC-based 2D MOFs with different linkers, the CuBDC-NO2 nanosheet membranes exhibit a reduced effective stacking aperture of 0.372 nm, yielding H2 permeance of 4.44 × 10-7 mol m-2 s-1 Pa-1 with a high H2/CO2 and H2/CH4 selectivity of 266 and 536, respectively. This work represents the in-depth investigation of the accurate tuning of MOF nanosheet stacking in the field of 2D materials, offering more perspectives for broader applications with universality for various 2D materials.

Sequential Linker Installation in Metal-Organic Frameworks

ConspectusMetal-organic frameworks (MOFs) represent a sophisticated blend of inorganic and organic components, promoting the development of coordination chemistry greatly and offering a versatile platform for tailored functionalities. By combining various metal nodes, organic linkers, and functional guests, MOFs provide numerous pathways for their design, synthesis, and customization. Among these, sequential linker installation (SLI) stands out as a novel and crucial strategy, enabling the precise integration of desired properties and functions at the atomic scale. SLI enhances structural diversity and stability while facilitating the meticulous construction of robust frameworks by leveraging open metal sites and functional organic linkers at targeted locations. Compared to the direct synthesis of MOFs, postsynthetic modification methods allow for precise regulation of their structures and corresponding properties. While unlike conventional postsynthetic modification methods, SLI requires the careful selection of linkers and framework design to ensure precise positioning for installation, which gives rise to the well-designed and ordered positions for the installed linkers, confirmed directly by X-ray diffraction technology.Recent advancements in MOF synthesis have led to the creation of increasingly tailored flexible matrix structures, particularly due to the diverse connection modes of multicore metal clusters, especially for the Zr6 cluster. The spatial hindrance of certain ligands has resulted in the formation of unsaturated metal clusters and various missing linker pockets. Examples of these advanced MOFs include PCN-606, PCN-608, PCN-609, PCN-700, and PCN-808, which feature specific open metal sites and certain framework flexibility conducive to SLI. Strategically positioned open metal sites within these frameworks serve as predetermined anchor points for desired functional molecules, while the frameworks' flexibility can accommodate molecules of varying sizes to a certain extent, enlarging the scopes of application greatly. This precise positioning of functional groups enables the creation of tailored sites for enhanced applications, such as adsorption, catalysis, and recognition.In this Account, we delve into the intricate process of designing and synthesizing MOFs with appropriate missing-linker pockets for the aforementioned applications. We discuss the meticulous selection of functional linkers and the methods used to insert them into the corresponding missing-linker pockets within the MOFs. Additionally, we explore the diverse properties and functionalities of the resulting MOFs, focusing on their adsorptive, catalytic, and recognition performance. Furthermore, we provide insights into the future trajectory of SLI methods, complemented by our recent works. This Account not only reviews the evolution of the SLI method but also underscores its practical applications across various functional domains, paving a rational pathway for the future development of advanced multifunctional MOFs through this method.

Multifunctional and Hierarchical Porous ZIF-8: Amine and Thiol Tagged via Mixed Multivariate Ligand Strategies for Enhanced CO2 and Iodine Adsorption

This study demonstrated a simple and innovative way of using the direct de novo synthesis to fabricate the mesoporous structure and diverse functionality of ZIF-8 for environmental cleanup and gas storage applications. By introducing different ligands, we have developed a version of ZIF-8 that could better capture carbon dioxide (CO2) and iodine. The ZIF-8 was successfully designed to have the hierarchical and mesoporous structure with the functional groups of amine and thiol groups by adjusting the pKa values (from 8 to 12) of ligand instead of the original ligand, 2-methyl imidazole (Hmim, pKa~14.2). The modulation of ZIF-8 particle size, porosity, and functional characteristics was achieved through varied ligands and their concentrations, streamlined into a single and room-temperature synthesis condition. The resulting ZIF-8 materials exhibit intricate hierarchical architectures and a high density of functional groups, significantly enhancing molecular diffusion and accessibility. Among the developed materials, ZIF-8-AS, featuring both amine and thiol groups, demonstrates the fastest adsorption kinetics and a twofold increase in iodine adsorption capacity (qm=1101.5 mg g-1) compared to ZIF-8 (qm=514.3 mg g-1). Furthermore, the hierarchical mesoporosity of ZIF-8-A-10.1 improves CO2 adsorption to 1.0 mmol g-1 at 298 K, which is 1.3 times higher than that of the microporous ZIF-8.

Molecular fingerprint and machine learning enhance high-performance MOFs for mustard gas removal

Chemical warfare agents (CWAs), epitomized by the notoriously used mustard gas (HD), represent a class of exceptionally toxic chemicals whose airborne removal is paramount for battlefield safety. This study integrates high-throughput computational screening (HTCS) with advanced machine learning (ML) techniques to investigate the efficacy of metal-organic frameworks (MOFs) in adsorbing and capturing trace amounts of HD present in the air. Our approach commenced with a comprehensive univariate analysis, scrutinizing the impact of six distinct descriptors on the adsorption efficiency of MOFs. This analysis elucidated a pronounced correlation between MOF density and the Henry coefficient in the effective capture of HD. Then, four ML algorithms were employed to train and predict the performance of MOFs. The Random Forest (RF) algorithm demonstrates strong model learning and good generalization, achieving the best prediction result of 98.3%. In a novel exploratory stride, we incorporated a 166-bit MACCS molecular fingerprinting (MF) to identify critical functional groups within adsorbents. From the top 100 MOFs analyzed, 22 optimal functional groups were identified. Leveraging these insights, we designed three innovative substructures, grounded in these key functional groups, to enhance HD adsorption efficiency. In this work, the combination of MF and ML could provide a new direction for efficient screening of MOFs for the capture of HD in the air. The outcomes of this study offer substantial potential to revolutionize the domain of CWA capture. This represents a significant stride toward developing practical solutions that enhance both environmental protection and battlefield security.

Interfacial Engineering of Heterogeneous Reactions for MOF-on-MOF Heterostructures

Metal-organic frameworks (MOFs), as a subclass of porous crystalline materials with unique structures and multifunctional properties, play a pivotal role in various research domains. In recent years, significant attention has been directed toward composite materials based on MOFs, particularly MOF-on-MOF heterostructures. Compared to individual MOF materials, MOF-on-MOF structures harness the distinctive attributes of two or more different MOFs, enabling synergistic effects and allowing for the tailored design of diverse multilayered architectures to expand their application scope. However, the rational design and facile synthesis of MOF-on-MOF composite materials are in principle challenging due to the structural diversity and the intricate interfaces. Hence, this review primarily focuses on elucidating the factors that influence their interfacial growth, with a specific emphasis on the interfacial engineering of heterogeneous reactions, in which MOF-on-MOF hybrids can be conveniently obtained by using pre-fabricated MOF precursors. These factors are categorized as internal and external elements, encompassing inorganic metals, organic ligands, lattice matching, nucleation kinetics, thermodynamics, etc. Meanwhile, these intriguing MOF-on-MOF materials offer a wide range of advantages in various application fields, such as adsorption, separation, catalysis, and energy-related applications. Finally, this review highlights current complexities and challenges while providing a forward-looking perspective on future research directions.

Intrinsic room-temperature ferromagnetism in a two-dimensional semiconducting metal-organic framework

The development of two-dimensional (2D) magnetic semiconductors with room-temperature ferromagnetism is a significant challenge in materials science and is important for the development of next-generation spintronic devices. Herein, we demonstrate that a 2D semiconducting antiferromagnetic Cu-MOF can be endowed with intrinsic room-temperature ferromagnetic coupling using a ligand cleavage strategy to regulate the inner magnetic interaction within the Cu dimers. Using the element-selective X-ray magnetic circular dichroism (XMCD) technique, we provide unambiguous evidence for intrinsic ferromagnetism. Exhaustive structural characterizations confirm that the change of magnetic coupling is caused by the increased distance between Cu atoms within a Cu dimer. Theoretical calculations reveal that the ferromagnetic coupling is enhanced with the increased Cu-Cu distance, which depresses the hybridization between 3d orbitals of nearest Cu atoms. Our work provides an effective avenue to design and fabricate MOF-based semiconducting room-temperature ferromagnetic materials and promotes their practical applications in next-generation spintronic devices.

Coordination Engineering of Defective Cobalt-Nitrogen-Carbon Electrocatalysts with Graphene Quantum Dots for Boosting Oxygen Reduction Reaction

Developing efficient and robust metal-nitrogen-carbon electrocatalysts for oxygen reduction reaction (ORR) is of great significance for the application of hydrogen-oxygen fuel cells and metal-air batteries. Herein, a coordination engineering strategy is developed to improve the ORR kinetics and stability of cobalt-nitrogen-carbon (Co-N-C) electrocatalysts by grafting the oxygen-rich graphene quantum dots (GQDs) onto the zeolite imidazole frameworks (ZIFs) precursors. The optimized oxygen-rich GQDs-functionalized Co-N-C (G-CoNOC) electrocatalyst demonstrates an increased mass activity, nearly two times higher than that of pristine defective Co-N-C electrocatalyst, and retains a stability of 90.0% after 200 h, even superior to the commercial Pt/C. Comprehensive investigations demonstrate that the GQDs coordination can not only decrease carbon defects of Co-N-C electrocatalysts, improving the electron transfer efficiency and resistance to the destructive free radicals from H₂ O₂ , but also optimize the electronic structure of atomic Co active site to achieve a desired adsorption energy of OOH^- , leading to enhanced ORR kinetics and stability by promoting further H₂ O₂ reduction, as confirmed by theoretical calculations and experimental results. Such a coordination engineering strategy provides a new perspective for the development of highly active noble-metal-free electrocatalysts for ORR.

Advances of Electroactive Metal-Organic Frameworks

The preparation of electroactive metal-organic frameworks (MOFs) for applications of supercapacitors and batteries has received much attention and remarkable progress during the past few years. MOF-based materials including pristine MOFs, hybrid MOFs or MOF composites, and MOF derivatives are well designed by a combination of organic linkers (e.g., carboxylic acids, conjugated aromatic phenols/thiols, conjugated aromatic amines, and N-heterocyclic donors) and metal salts to construct predictable structures with appropriate properties. This review will focus on construction strategies of pristine MOFs and hybrid MOFs as anodes, cathodes, separators, and electrolytes in supercapacitors and batteries. Descriptions and discussions follow categories of electrochemical double-layer capacitors (EDLCs), pseudocapacitors (PSCs), and hybrid supercapacitors (HSCs) for supercapacitors. In contrast, Li-ion batteries (LIBs), Lithium-sulfur batteries (LSBs), Lithium-oxygen batteries (LOBs), Sodium-ion batteries (SIBs), Sodium-sulfur batteries (SSBs), Zinc-ion batteries (ZIBs), Zinc-air batteries (ZABs), Aluminum-sulfur batteries (ASBs), and others (e.g., LiSe, NiZn, H⁺ , alkaline, organic, and redox flow batteries) are categorized for batteries.

Hetero-Polycrystalline Membranes with Narrow and Rigid Pores for Molecular Sieving

Molecular sieving membranes have great potential for energy-saving separations, but they suffer from permeability-selectivity trade-off limitation. In this report, simultaneous hetero-crystallization and hetero-linker coordination of metal-organic framework (MOF) hollow fiber membranes through one-pot synthesis for precise gas separation is reported. It is found that the hetero-polycrystalline membranes consist of 2D and 3D MOF phases and are defect-free and roughly orientated, hetero-linker exchange of 3D phase by larger geometric ones can narrow transport pathway, and framework rigidification occurs and thus fixes MOF channels. The prepared membranes are robust and reproducible, and exhibit substantially improved performance, with H₂ /CO₂ , H₂ /N₂ , and H₂ /CH₄ selectivities up to 361, 482, and 541, respectively, accompanied by high H₂ permeance over 1100 gas permeation units, which can easily outclass trade-off upper bounds of state-of-the-art membranes.

In Situ Synthesis of Multivariate Zeolitic Imidazolate Frameworks for C2 H4 /C2 H6 Kinetic Separation

Herein, a new approach for the in situ synthesis of zeolitic imidazolate framework (ZIF) nanoparticles with triple ligands, referred to as Sogang ZIF-8 (SZIF-8), is reported for enhanced C₂ H₄ /C₂ H₆ kinetic separation. SZIF-8 consists of tetrahedral zinc metals coordinated with tri-butyl amine (TBA), 2,4-dimethylimidazole (DIm), and 2-methylimidazole (MIm). SZIF-8(x) with different DIm contents in x (up to 23.2 mol%) are synthesized in situ because TBA preferably deprotonates DIm ligands due to the much lower pK_a of DIm over MIm, allowing for the Zn-DIm coordination. The Zn-DIm coordination reduces the window size of ZIF-8 with suppressed linker flipping motion due to bulky DIm ligands and simultaneously enhances the interfacial interaction between 6FDA-DAM polyimide (6FDA) and SZIF-8 via electron donor-acceptor interactions. Consequently, 6FDA/SZIF-8(13) mixed matrix membrane exhibits an excellent C₂ H₄ permeability of 60.3 Barrer and C₂ H₄ /C₂ H₆ selectivity of 4.5. The temperature-dependent transport characterization reveals that such excellent C₂ H₄ /C₂ H₆ kinetic separation is attained by the enhancement in size discrimination-based energetic selectivity. Our hybrid multi-ligand approach can offer a useful tool for the fine-tuning of molecular structures and textural properties of other metal organic frameworks.

A Dual-Responsive Magnetoactive and Electro-Ionic Soft Actuator Derived from a Nickel-Based Metal-Organic Framework

There is growing demand for multiresponsive soft actuators for the realization of natural, safe, and complex motions in robotic interactions. In particular, soft actuators simultaneously stimulated by electrical and magnetic fields are always under development owing to their simple controllability and reliability during operation. Herein, magnetically and electrically driven dual-responsive soft actuators (MESAs) derived from novel nickel-based metal-organic frameworks (Ni-MOFs-700C), are reported. Nanoscale Ni-MOFs-700C has excellent electrochemical and magnetic properties that allow it to be used as a multifunctional material under both magnetoactive and electro-ionic actuations. The dual-responsive MESA exhibits a bending displacement of 30 mm and an ultrafast rising time of 1.5 s under a very low input voltage of 1 V and also exerts a bending deflection of 12.5 mm at 50 mT under a high excitation frequency of 5 Hz. By utilizing a dual-responsive MESA, the hovering motion of a hummingbird robot is demonstrated under magnetic and electrical stimuli.

In Situ Tracking of Nonthermal Plasma Etching of ZIF-8 Films

Surface characterization is critical for understanding the processes used for preparing catalysts, sorbents, and membranes. Nonthermal plasma (NTP) is a process that achieves high reactivity at low temperatures and is used to tailor the surface properties of materials. In this work, we combine the capabilities of infrared reflection absorption spectroscopy (IRRAS) with NTP for the in situ interrogation of zeolitic imidazolate framework-8 (ZIF-8) thin films to probe modifications in the material induced by oxygen and nitrogen plasmas. The IRRAS measurements in oxygen plasma reveal etching of organic ligands with sequential removal of the methyl group and imidazole ring and with the formation of carbonyl moieties (C═O). In contrast, nitrogen plasma induces mild etching and grafting of nitrile groups (-C≡N). Scanning electron microscopy imaging shows that oxygen plasma, at prolonged times, significantly degrades the ZIF-8 film at the grain boundaries. Treatment of ZIF-8 membranes using mild plasma conditions yields a fivefold enhancement for H₂/N₂ and CO₂/CH₄ ideal selectivities and an eightfold enhancement for CO₂/N₂ ideal selectivity. Additionally, the new tools described here can be used for spectroscopic in situ tracking of plasma-induced chemistry on thin films in general.

Zeolitic Imidazolate Framework Membranes: Novel Synthesis Methods and Progress Toward Industrial Use

In the last decade, zeolitic imidazolate frameworks (ZIFs) have been studied extensively for their potential as selective separation membranes. In this review, we highlight unique structural properties of ZIFs that allow them to achieve certain important separations, like that of propylene from propane, and summarize the state of the art in ZIF thin-film deposition on porous substrates and their modification by postsynthesis treatments. We also review the reported membrane performance for representative membrane synthesis approaches and attempt to rank the synthesis methods with respect to potential for scalability. To compare the dependence of membrane performance on membrane synthesis methods and operating conditions, we map out fluxes and separation factors of selected ZIF-8 membranes for propylene/propane separation. Finally, we provide future directions considering the importance of further improvements in scalability, cost effectiveness, and stable performance under industrially relevant conditions. Expected final online publication date for the Annual Review of Chemical and Biomolecular Engineering, Volume 13 is October 2022. Please see http://www.annualreviews.org/page/journal/pubdates for revised estimates.

Chiral Metal-Organic Frameworks

In the past two decades, metal-organic frameworks (MOFs) or porous coordination polymers (PCPs) assembled from metal ions or clusters and organic linkers via metal-ligand coordination bonds have captivated significant scientific interest on account of their high crystallinity, exceptional porosity, and tunable pore size, high modularity, and diverse functionality. The opportunity to achieve functional porous materials by design with promising properties, unattainable for solid-state materials in general, distinguishes MOFs from other classes of materials, in particular, traditional porous materials such as activated carbon, silica, and zeolites, thereby leading to complementary properties. Scientists have conducted intense research in the production of chiral MOF (CMOF) materials for specific applications including but not limited to chiral recognition, separation, and catalysis since the discovery of the first functional CMOF (i.e., d- or l-POST-1). At present, CMOFs have become interdisciplinary between chirality chemistry, coordination chemistry, and material chemistry, which involve in many subjects including chemistry, physics, optics, medicine, pharmacology, biology, crystal engineering, environmental science, etc. In this review, we will systematically summarize the recent progress of CMOFs regarding design strategies, synthetic approaches, and cutting-edge applications. In particular, we will highlight the successful implementation of CMOFs in asymmetric catalysis, enantioselective separation, enantioselective recognition, and sensing. We envision that this review will provide readers a good understanding of CMOF chemistry and, more importantly, facilitate research endeavors for the rational design of multifunctional CMOFs and their industrial implementation.

Metal imidazolate sulphate frameworks as a variation of zeolitic imidazolate frameworks

Sulphate ions can be incorporated into zinc imidazolate frameworks to give rise to zinc imidazolate sulphate frameworks, that is, a square-grid network, a zeolite-like GIS framework, or a porous pillar-layered structure where interlayer octahedral Zn²⁺ ions connect honeycomb-like layers.

Vapor-Phase Processing of Metal-Organic Frameworks

ConspectusPorous metal-organic frameworks (MOFs), formed from organic linkers and metal nodes, have attracted intense research attention. Because of their high specific surface areas, uniform and adjustable pore sizes, and versatile physicochemical properties, MOFs have shown disruptive potential in adsorption, catalysis, separation, etc. For many of these applications, MOFs are synthesized solvothermally as bulk powders and subsequently shaped as pellets or extrudates. Other applications, such as membrane separations and (opto)electronics, require the implementation of MOFs as (patterned) thin films. Most thin-film formation methods are adapted from liquid-phase synthesis protocols. Precursor transport and nucleation are difficult to control in these cases, often leading to particle formation in solution. Moreover, the use of solvents gives rise to environmental and safety challenges, incompatibility issues with some substrates, and corrosion issues in the case of dissolved metal salts. In contrast, vapor-phase processing methods have the merits of environmental friendliness, control over thickness and conformality, scalability in production, and high compatibility with other workflows.In this Account, we outline some of our efforts and related studies in the development and application of vapor-phase processing of crystalline MOF materials (MOF-VPP). We first highlight the advances and mechanisms in the vapor-phase deposition of MOFs (MOF-VPD), mainly focusing on the reactions between a linker vapor and a metal-containing precursor layer. The characteristics of the obtained MOFs (thickness, porosity, crystallographic phase, orientation, etc.) and the correlation of these properties with the deposition parameters (precursors, temperatures, humidity, post-treatments, etc.) are discussed. Some in situ characterization methods that contributed to a fundamental understanding of the involved mechanisms are included in the discussion. Second, four vapor-phase postsynthetic functionalization (PSF) methods are summarized: linker exchange, guest loading, linker grafting, and metalation. These approaches eliminate potential solubility issues and enable fast diffusion of reactants and guests as well as a high loading or degree of exchange. Vapor-phase PSF provides a platform to modify the MOF porosity or even introduce new functionalities (e.g., luminescence photoswitching and catalytic activity). Third, since vapor-phase processing methods enable the integration of MOF film deposition into a (micro)fabrication workflow, they facilitate a range of applications with improved performance (low-k dielectrics, sensors, membrane separations, etc.). Finally, we provide a discussion on the limitations, challenges, and further opportunities for MOF-VPP. Through the discussion and analysis of the vapor-phase processing strategies as well as the underlying mechanisms in this Account, we hope to contribute to the development of the controllable synthesis, functionalization, and application of MOFs and related materials.

Metal Exchange of ZIF-8 and ZIF-67 Nanoparticles with Fe(II) for Enhanced Photocatalytic Performance

Zeolitic imidazolate frameworks (ZIFs), such as ZIF-8 and ZIF-67, were found to be efficient catalysts. However, ZIFs are not used much in photocatalysis due to their low photocatalytic activity for most reactions. The photocatalytic activity can be improved by modifying the framework by exchanging the Zn(II) ions (ZIF-8) and Co(II) ions (ZIF-67) with a more photocatalytically active metal(II) ion to form an efficient bimetallic ZIF photocatalyst. Redox-active iron (Fe)-based materials are known to be highly potent photocatalysts. Thus, incorporating iron into ZIFs could significantly enhance their photocatalytic performance. In this study, we modified nanosized ZIF-8(Zn) and ZIF-67(Co) via metal (Fe²⁺) exchange to produce bimetallic frameworks that are photocatalytically more active than their parent ZIFs. Nanosized ZIF-8 and ZIF-67 were synthesized isothermally in either water or methanol under ambient conditions. From these, Fe-containing bimetallic ZIF-8 and ZIF-67 nanoparticles were synthesized via the metal exchange, and their performance on the photocatalytic degradation of dye was evaluated. The morphology and crystal structures of the pristine ZIF-8 and ZIF-67 nanoparticles were retained to a large extent during the iron exchange. Their Brunauer-Emmett-Teller (BET) surface areas decreased by less than 15% for nZIF-8 and less than 12% for nZIF-67. The binding energy values on X-ray photoelectron spectroscopy (XPS) confirmed the preservation of the oxidation state of Fe(II) during the exchange process. A remarkably higher catalytic activity was observed for the photocatalytic degradation of dye by the Fe-exchanged nZIF-8 and nZIF-67 compared to their parent ZIFs. This proved that the incorporation of Fe(II) centers into the ZIF framework enhanced the photocatalytic activity of the framework dramatically. In addition, these catalysts can be regenerated and reused without an appreciable loss in activity.

A Highly Selective Supramolecule Array Membrane Made of Zero-Dimensional Molecules for Gas Separation

We orderly assembled zero-dimensional 2-methylimidazole (mim) molecules into unprecedented supramolecule array membranes (SAMs) through solvent-free vapor processing, realizing the intermolecular spacing of mim at ca. 0.30 nm available as size-sieving channels for distinguishing the tiny difference between H2 (kinetic diameter: 0.289 nm) and CO2 (kinetic diameter: 0.33 nm). The highly oriented and dense membranes yield a separation factor above 3600 for equimolar H2 /CO2 mixtures, which is one order of magnitude higher than those of the state-of-the-art membranes defining 2017's upper bound for H2 /CO2 separation. These SAMs define a new benchmark for molecular sieve membranes and are of paramount importance to precombustion carbon capture. Given the range of supramolecules, we anticipate SAMs with variable intermolecular channels could be applied in diversified separations that are prevalent in chemical processes.

Large-Scale Production of Hierarchically Porous Metal-Organic Frameworks by a Reflux-Assisted Post-Synthetic Ligand Substitution Strategy

The mass production of hierarchically porous metal-organic frameworks (HP-MOFs) with adjustable morphology and size as well as retained crystallinity is highly desirable yet challenging. Herein, we have developed a versatile post-synthetic ligand substitution (PSLS) strategy to convert typical microporous MOFs and even their composites to HP-MOFs and their composites at a 10 g level and beyond in a simple reflux system. The resulting HP-MOFs feature intrinsic micropores and abundant defective mesopores, which greatly facilitate the transport and activation of large substrates for stable and efficient heterogeneous catalysis. Furthermore, the presence of defective mesopores in the HP-MOF composites improves activity and selectivity for large molecule-involved one-pot tandem catalysis. This strategy opens a new door to fast, facile, general, and scale-up production of HP-MOFs and related composites for expanding applications of conventional microporous MOF-based materials.

Barbituric and thiobarbituric acid-based UiO-66-NH2 adsorbents for iodine gas capture: Characterization, efficiency and mechanisms

Efficient iodine gas capture is necessitated in many industries like spent nuclear fuel off-gas treatment in view of environmental protection and resource recycling. However, the adsorption efficiency and stability of the current adsorbents are limited. In the present work, efficient and stable barbituric and thiobarbituric acid-based UiO-66-NH₂ adsorbents (i.e., UiO-66-NH-B.D and UiO-66-NH-T.D, respectively) have been synthesized by post-synthetic covalent modification. Characterization approaches, including SEM-EDS, TEM, XRD, FTIR, XPS, ¹H NMR, TGA and BET, are used to obtain information on the properties and adsorption mechanisms of these metal-organic framework (MOF) adsorbents. The kinetics and mechanisms involved are studied in detail. The treatment efficiency and recyclability of the adsorbents are checked and compared with the adsorbents reported in previous works. The results show that the current adsorbents are potentially suitable for efficient iodine gas capture. High maximum iodine adsorption amount by UiO-66-NH-B.D and UiO-66-NH-T.D (1.17 and 1.33 g/g) was achieved under 75 °C. These new adsorbents are thermally stable for iodine adsorption and regenerated and reused with good performance. The adsorption mechanisms were revealed based on experimental results, indicating that iodine is adsorbed by both physisorption and chemisorption.

Double-Walled Metal-Organic Framework with Regulable Pore Environments for Efficient Removal of Radioactive Cesium Cations

An anion double-walled metal-organic framework [Co₂Li₄(BTC)₃(DMF)(H₂O)·(CH₃)₂N]_n (1) based on heterobimetallic Li⁺ and Co²⁺ ions was successfully constructed. Utilizing selective destruction and formation of Co-O/Co-N bonds in the metal chains, [Co₂Li₄(BTC)₃(py)(H₂O)·(CH₃)₂N]_n (2) and [Co₂Li₄(BTC)₃(pi)(H₂O)·(CH₃)₂N]_n (3) with the same skeleton but distinct pore structures can be surprisingly obtained. Additionally, compounds 2 and 3 can be transformed into [Co₂Li₄(BTC)₃(H₂O)₂·(CH₃)₂N]_n (4) by soaking them in an ethanol solution. This kind of single-crystal-to-single-crystal transformation successfully regulates the pore structure of MOFs and enriches the diversity of the pore wall on the premise of retaining the original framework. Most impressively, compound 1 shows high adsorption capacity for Cs⁺ cations and is a good candidate to selectively accommodate Cs⁺ among the common alkali metal ions, which is future identified by single-crystal X-ray diffraction and inductively coupled plasma mass spectrometry (ICP-MS) test. Meanwhile, compound 1 can selectively adsorb methylene blue (MB) and crystal violet (CV) molecules over Rhodamine B (RMB).

Postsynthetic Modification of Metal-Organic Frameworks by Vapor-Phase Grafting

A vapor-phase grafting strategy is developed for the postsynthetic modification of metal-organic frameworks (MOFs). On the basis of the Schotten-Baumann reaction between acyl chloride (-COCl) and amino (-NH₂) groups and hydrolysis of -COCl, the carboxylated MOFs could be prepared through simple exposure in vaporized acyl chloride molecules and immersion in water. The modified MOFs have well-maintained crystalline structures and porosities and show substantially improved fluoride removal performance.

Delayed Linker Addition (DLA) Synthesis for Hybrid SOD ZIFs with Unsubstituted Imidazolate Linkers for Propylene/Propane and n-Butane/i-Butane Separations

We present a novel synthesis strategy termed delayed linker addition (DLA) to synthesize hybrid zeolitic-imidazolate frameworks containing unsubstituted imidazolate linkers (Im) with SOD topology (hereafter termed Im/ZIF-8). Im linker incorporation can create larger voids and apertures, which are important properties for gas storage and separation. To date, there have been only a handful of reports of Im linkers incorporated into ZIF-8 frameworks, typically requiring arduous and complicated post synthesis approaches. DLA, as reported here, is a simple one-step synthesis strategy allowing high incorporation of Im linker into the ZIF-8 framework while still retaining its SOD topology. We fabricated mixed-matrix membranes (MMMs) with 6FDA-DAM polymer and Im/ZIF-8 obtained via DLA as a filler. The Im/ZIF-8-containing MMMs showed excellent performance for both propylene/propane and n-butane/i-butane separation, displaying permeability and ideal selectivity well above the polymer upper bound. Moreover, highly detailed molecular simulations shed light to the aperture size and flexibility response of Im/ZIF-8 and its improved diffusivity as compared to ZIF-8.

ZIF-8 Membrane Permselectivity Modification by Manganese(II) Acetylacetonate Vapor Treatment

Vapor-phase treatment of ZIF-8 membranes with manganese(II) acetylacetonate (Mn(acac)₂ ) allows permselectivity tuning. Propylene/propane selectivity increases from 31 to 210 after the Mn(acac)₂ treatment at 165 °C for 30 min, while selectivities increase from 14.6 to 242 for H₂ /CH₄ , from 2.9 to 38 for CO₂ /CH₄ , from 2.4 to 29 for CO₂ /N₂ , and from 2.9 to 7.5 for O₂ /N₂ , after Mn(acac)₂ treatment at 175 °C for 30 min. Stable equimolar propylene/propane mixture selectivity of 165 at ambient temperature and 4 bar equimolar feed with a propylene flux of 8.3×10^-4  mol m^-2  s^-1 is established. A control experiment excludes thermal treatment alone causing these changes. XPS analysis reveals the presence of Mn(acac)₂ on the outer surface of the vapor-treated ZIF-8 membranes while no other changes are detectable by X-ray diffraction and infrared spectroscopy.

A new 2D Cu-MOF constructed from carboxylate ligands containing C-Hπ interactions as a recyclable responsive luminescent sensor for VOCs

A new type of 2D metal-organic framework (MOF), namely Cu-MOF, was constructed from Cu(NO₃)₂·3H₂O and the novel ligand 1,4-bis(4-naphthoic acid)benzene. The C-Hπ interactions in the Cu-MOF effectively reduced aggregation-caused quenching (ACQ) due to restrictions in intramolecular motion (RIM), increased fluorescence, and controlled crystal packing properties, resulting in low dimensional parallelogram channels and a responsive "turn-on" fluorescence. The activated Cu-MOF exhibited excellent chemical sensing properties to various volatile organic compounds (VOCs) and showed excellent recyclability.

Template-Mediated Control over Polymorphism in the Vapor-Assisted Formation of Zeolitic Imidazolate Framework Powders and Films

The landscape of possible polymorphs for some metal-organic frameworks (MOFs) can pose a challenge for controlling the outcome of their syntheses. Demonstrated here is the use of a template to control in the vapor-assisted formation of zeolitic imidazolate framework (ZIF) powders and thin films. Introducing a small amount of either ethanol or dimethylformamide vapor during the reaction between ZnO and 4,5-dichloroimidazole vapor results in the formation of the porous ZIF-71 phase, whereas other conditions lead to the formation of the dense ZIF-72 phase or amorphous materials. Time-resolved in situ small-angle X-ray scattering reveals that the porous phase is metastable and can be transformed into its dense polymorph. This transformation is avoided through the introduction of template vapor. The porosity of the resulting ZIF powders and films was studied by N₂ and Kr physisorption, as well as positron annihilation lifetime spectroscopy. The templating principle was demonstrated for other members of the ZIF family as well, including the ZIF-7 series, ZIF-8_Cl, and ZIF-8_Br.

Increasing the Complexity in the MIL-53 Structure: The Combination of the Mixed-Metal and the Mixed-Linker Concepts

The isoreticular mixed-component concept is a promising approach to tailor the material properties of metal-organic frameworks. While isoreticular mixed-metal or mixed-linker materials are commonly synthesized, the combination of both concepts for the development of isoreticular materials featuring both two metals and two linkers is still rarely investigated. Herein, we present the development of mixed-metal/mixed-linker MIL-53 materials that contain different metal combinations (Al/Sc, Al/V, Al/Cr, Al/Fe) and different linker ratios (terephthalate/2-aminoterephthalate). The possibility of changing the metal combination and the linker ratio independently from each other enables a large variety of modifications. A thorough characterization (PXRD, ATR-IR, TGA, 1 H NMR, ICP-OES) confirmed that all components were incorporated into the framework structure with a statistical distribution. Nitrogen physisorption measurements showed that the breathing behavior can be tailored by adjusting the linker ratio for all metal combinations. All materials were successfully used for post-synthetic modification reactions with maleic anhydride.

Scalable crystalline porous membranes: current state and perspectives

Crystalline porous materials (CPMs) with uniform and regular pore systems show great potential for separation applications using membrane technology. Along with the research on the synthesis of precisely engineered porous structures, significant attention has been paid to the practical application of these materials for preparation of crystalline porous membranes (CPMBs). In this review, the progress made in the preparation of thin, large area and defect-free CPMBs using classical and novel porous materials and processing is presented. The current state-of-the-art of scalable CPMBs with different nodes (inorganic, organic and hybrid) and various linking bonds (covalent, coordination, and hydrogen bonds) is revealed. The advances made in the scalable production of high-performance crystalline porous membranes are categorized according to the strategies adapted from polymer membranes (interfacial assembly, solution-casting, melt extrusion and polymerization of CPMs) and tailored based on CPM properties (seeding-secondary growth, conversion of precursors, electrodeposition and chemical vapor deposition). The strategies are compared and ranked based on their scalability and cost. The potential applications of CPMBs have been concisely summarized. Finally, the performance and challenges in the preparation of scalable CPMBs with emphasis on their sustainability are presented.

The state of the field: from inception to commercialization of metal–organic frameworks

We provide a brief overview of the state of the MOF field from their inception to their synthesis, potential applications, and finally, to their commercialization.