Superaerophobic hydrogels for enhanced electrochemical and photoelectrochemical hydrogen production

Size-Controllable High-Entropy Alloys Toward Stable Hydrogen Production at Industrial-Scale Current Densities

Efficient and stable electrocatalytic hydrogen evolution reaction (HER) at high current densities is highly desirable for industrial-scale hydrogen production, which is yet challenging, because of the electrocatalyst with short lifespans during the acidic HER process. Here, a controllable preparation technique is successfully developed to synthesize PdPtRuRhAu high-entropy alloys (HEAs) of various sizes, within the 3.14 nm particles (HEA-3.14) demonstrating exceptional catalytic performance and stable hydrogen production at current densities of -500 and -1000 mA·cm-2 with negligible activity loss over 100 h. Theoretical calculations indicate that the bridge adsorption site of Pd-Au serves as an ideal location for HER, with HEA-3.14 possessing the highest proportion of such sites, reaching 18.97%. To further analyze the thermodynamic stability of HEAs, an element-encoding machine learning model is developed from over 300 000 preprocessed dataset of HEAs that achieving an impressively low RMSE of 58.6 °C and a high R2 value of 0.98. By integrating thermodynamic modeling with machine learning methods, the melting point of the PdPtRuRhAu HEAs at 3.14 nm (366 °C) is predicted, which aligns well with the results obtained from differential scanning calorimetry tests. This work offers new insights and approaches for designing HEAs that reliably produce hydrogen at high current densities.

Enhanced solar hydrogen production via reconfigured semi-polar facet/cocatalyst heterointerfaces in GaN/Si photocathodes

The development of an efficient and durable photoelectrode is critical for achieving large-scale applications in photoelectrochemical water splitting. Here, we report a unique photoelectrode composed of reconfigured gallium nitride nanowire-on-silicon wafer loaded with Au nanoparticles as cocatalyst that achieved an impressive applied bias photon-to-current efficiency of 10.36% under AM 1.5G one sun illumination while exhibiting stable PEC hydrogen evolution over 800 h at a high current density. Specifically, by tailoring the GaN nanowires via a simple alkaline-etching step to expose the inner (101 ¯ 1 ¯ ) facets, we achieve a highly coupled semiconductor nanowire-cocatalyst heterointerface with strong electron interaction. The strongly coupled reconfigured GaN nanowire/Au heterointerface not only optimizes the electronic structure of Au nanoparticles to form abundant highly active interfacial regions, eventually realizing superior hydrogen evolution activity but also enables GaN nanowires to provide a stronger anchoring effect for Au nanoparticles, preventing the detachment of Au nanoparticles during the intense hydrogen evolution process. The proposed photoelectrode offers a feasible structure for overcoming the efficiency-reliability bottleneck of PEC devices for producing clean hydrogen fuel.

The Behaviors of Interfacial Nanobubbles on Flat or Rough Electrode Surfaces in Electrochemistry

The existence of interfacial nanobubbles on electrode surfaces is thought to block the active area, leading to a considerable decrease in the energy conversion efficiency. Gaining insight into how bubbles form on electrodes will be beneficial for designing effective electrochemical cells and enhancing the electrolytic efficiency. In this article, molecular dynamics (MD) simulations are employed to make a systematic comparison of behaviors of interfacial nanobubbles on both flat and rough electrode surfaces in electrochemistry. On a flat electrode surface, bubble nucleation can be categorized into single-site and multisite nucleation, influenced by the electrode sizes and electrolytic rates. The various rates of gas production result in three different scenarios for single-site nucleation: "growth-growth," "growth-shrinking," and "growth-stabilization" behaviors. On a rough one, bubbles are pinned at an early stage. Either through cooperative release or self-release, the bubbles continue to grow until the influx and outflux gas of the bubble reach an equilibrium. In addition, the evolutionary mechanism of interface nanobubbles was discussed on a rough nanoelectrode surface. Based on the dynamic equilibrium mechanism, a theoretical relationship between contact angle and base diameter of equilibrium interfacial nanobubbles was developed. The theoretical model can qualitatively describe the simulation observation of how bubble's shape depends on the electrode surface morphology.

Parallel multi-stacked photoanodes of Sb-doped p-n homojunction hematite with near-theoretical solar conversion efficiency

Developing transparent and efficient photoanodes is a challenging but essential task in tandem photoelectrochemical cell for unassisted solar water splitting without an external bias. Here we report construction of p-n homojunction hematite photoanodes by hybrid microwave annealing-induced single antimony doping, which results in the gradually-increased valence states from the surface to the inside by the unique features of hybrid microwave annealing. The Sb-doped p-n homojunction hematite photoanode exhibits improved performance and displays a good transparency, achieving a stable photocurrent density of ~4.21 mA cm-2 at 1.23 VRHE under 100 mW cm-2 solar irradiation, which is comparable to the reported state-of-the-art hematite photoanodes. More importantly, a parallel-connected stack of six photoanodes of transparent p-n homojunction records a near-theoretical photocurrent density of ~10 mA cm-2 at 1.23 VRHE under standard photoelectrochemical water splitting conditions, which serves as a useful reference for hematite photoanodes and promises its practical application for unbiased photoelectrochemical water splitting.

Enhancing electrochemical water-splitting efficiency with superaerophobic nickel-coated catalysts on Chinese rice paper

The quest for efficient hydrogen production highlights the need for cost-effective and high-performance catalysts to enhance the electrochemical water-splitting process. A significant challenge in developing self-supporting catalysts lies in the high cost and complex modification of traditional substrates. In this study, we developed catalysts featuring superaerophobic microstructures engineered on microspherical nickel-coated Chinese rice paper (Ni-RP), chosen for its affordability and exceptional ductility. These catalysts, due to their microspherical morphology and textured surface, exhibited significant superaerophobic properties, substantially reducing bubble adhesion. The nickel oxy-hydroxide (NiOxHy) and phosphorus-doped nickel (PNi) catalysts on Ni-RP demonstrated effective roles in oxygen evolution reaction (OER) and hydrogen evolution reaction (HER), achieving overpotentials of 250 mV at 20 mA cm-2 and 87 mV at -10 mA cm-2 in 1 M KOH, respectively. Moreover, a custom water-splitting cell using PNi/Ni-RP and NiOxHy/Ni-RP electrodes reached an impressive average voltage of 1.55 V at 10 mA cm-2, with stable performance over 100 h in 1 M KOH. Our findings present a cost-effective, sustainable, and easily modifiable substrate that utilizes superaerophobic structures to create efficient and durable catalysts for water splitting. This work serves as a compelling example of designing high-performance self-supporting catalysts for electrocatalytic applications.

Gas Evolution in Water Electrolysis

Gas bubbles generated by the hydrogen evolution reaction and oxygen evolution reaction during water electrolysis influence the energy conversion efficiency of hydrogen production. Here, we survey what is known about the interaction of gas bubbles and electrode surfaces and the influence of gas evolution on practicable devices used for water electrolysis. We outline the physical processes occurring during the life cycle of a bubble, summarize techniques used to characterize gas evolution phenomena in situ and in practical device environments, and discuss ways that electrodes can be tailored to facilitate gas removal at high current densities. Lastly, we review efforts to model the behavior of individual gas bubbles and multiphase flows produced at gas-evolving electrodes. We conclude our review with a short summary of outstanding questions that could be answered by future efforts to characterize gas evolution in electrochemical device environments or by improved simulations of multiphase flows.

Metal-insulator-semiconductor photoelectrodes for enhanced photoelectrochemical water splitting

Photoelectrochemical (PEC) water splitting provides a scalable and integrated platform to harness renewable solar energy for green hydrogen production. The practical implementation of PEC systems hinges on addressing three critical challenges: enhancing energy conversion efficiency, ensuring long-term stability, and achieving economic viability. Metal-insulator-semiconductor (MIS) heterojunction photoelectrodes have gained significant attention over the last decade for their ability to efficiently segregate photogenerated carriers and mitigate corrosion-induced semiconductor degradation. This review discusses the structural composition and interfacial intricacies of MIS photoelectrodes tailored for PEC water splitting. The application of MIS heterostructures across various semiconductor light-absorbing layers, including traditional photovoltaic-grade semiconductors, metal oxides, and emerging materials, is presented first. Subsequently, this review elucidates the reaction mechanisms and respective merits of vacuum and non-vacuum deposition techniques in the fabrication of the insulator layers. In the context of the metal layers, this review extends beyond the conventional scope, not only by introducing metal-based cocatalysts, but also by exploring the latest advancements in molecular and single-atom catalysts integrated within MIS photoelectrodes. Furthermore, a systematic summary of carrier transfer mechanisms and interface design principles of MIS photoelectrodes is presented, which are pivotal for optimizing energy band alignment and enhancing solar-to-chemical conversion efficiency within the PEC system. Finally, this review explores innovative derivative configurations of MIS photoelectrodes, including back-illuminated MIS photoelectrodes, inverted MIS photoelectrodes, tandem MIS photoelectrodes, and monolithically integrated wireless MIS photoelectrodes. These novel architectures address the limitations of traditional MIS structures by effectively coupling different functional modules, minimizing optical and ohmic losses, and mitigating recombination losses.

Self-healable, Tolerant Superaerophobic Coating for Improving Electrochemical Hydrogen Production

Gas-evolving electrodes often suffer from the blocking of catalytic active sites-due to unwanted and unavoidable adhesion of generated gas bubbles, which elevates the overpotential for the electrochemical hydrogen evolution reaction (HER)- by raising the resistance of the electrode. Here, a catalyst-free and self-healable superaerophobic coating having ultra-low bubble adhesion is introduced for achieving significantly depleted overpotentials of 209 and 506 mV at both low (50 mA cm-2) and high (500 mA cm-2) current densities, respectively, compared to a bare nickel-foam electrode. The optimized coating ensured an early detachment of the generated tiny (0.8 ± 0.1 mm) gas bubble-and thus, prevented the undesired rise in resistance of the coated electrode. The systematic association of physical (i.e., ionic interactions, H-bonding, etc.) cross-linkage, β-amino ester type covalent cross-linkage and reinforced halloysite nano clay enables the design of such functional material embedded with essential characteristics-including improved mechanical (toughness of 63.7 kJ m-3, and tensile modulus of 26 kPa) property and chemical (extremes of pH (1 and 14), salinity, etc.) stability, rapid (<10 min) self-healing ability (even at alkaline condition) and desired bubble-wettability (bubble contact angle of 158.2 ± 0.2°) with ultralow force (4.2 ± 0.4 µN) of bubble adhesion.

Tailoring Second Coordination Sphere for Tunable Solid-Liquid Interfacial Charge Transfer toward Enhanced Photoelectrochemical H2 Production

The recombination of photogenerated charge carriers severely limits the performance of photoelectrochemical (PEC) H2 production. Here, we demonstrate that this limitation can be overcome by optimizing the charge transfer dynamics at the solid-liquid interface via molecular catalyst design. Specifically, the surface of a p-Si photocathode is modulated using molecular catalysts with different metal atoms and organic ligands to improve H2 production performance. Co(pda-SO3H)2 is identified as an efficient and durable catalyst for H2 production through the rational design of metal centers and first/second coordination spheres. The modulation with Co(pda-SO3H)2, which contains an electron-withdrawing -SO3H group in the second coordination sphere, elevates the flat-band potential of the polished p-Si photocathode and nanoporous p-Si photocathode by 81 mV and 124 mV, respectively, leading to the maximized energy band bending and the minimized interfacial carrier transport resistance. Consequently, both the two photocathodes achieve the Faradaic efficiency of more than 95 % for H2 production, which is well maintained during 18 h and 21 h reaction, respectively. This work highlights that the band-edge engineering by molecular catalysts could be an important design consideration for semiconductor-catalyst hybrids toward PEC H2 production.

Bioinspired Gas Manipulation for Regulating Multiphase Interactions in Electrochemistry

The manipulation of gas in multiphase interactions plays a crucial role in various electrochemical processes. Inspired by nature, researchers have explored bioinspired strategies for regulating these interactions, leading to remarkable advancements in design, mechanism, and applications. This paper provides a comprehensive overview of bioinspired gas manipulation in electrochemistry. It traces the evolution of gas manipulation in gas-involving electrochemical reactions, highlighting the key milestones and breakthroughs achieved thus far. The paper then delves into the design principles and underlying mechanisms of superaerophobic and (super)aerophilic electrodes, as well as asymmetric electrodes. Furthermore, the applications of bioinspired gas manipulation in hydrogen evolution reaction (HER), carbon dioxide reduction reaction (CO2RR), and other gas-involving electrochemical reactions are summarized. The promising prospects and future directions in advancing multiphase interactions through gas manipulation are also discussed.

Poly(dehydroalanine)-Based Hydrogels as Efficient Soft Matter Matrices for Light-Driven Catalysis

Soft matter integration of photosensitizers and catalysts provides promising solutions to developing sustainable materials for energy conversion. Particularly, hydrogels bring unique benefits, such as spatial control and 3D-accessibility of molecular units, as well as recyclability. Herein, the preparation of polyampholyte hydrogels based on poly(dehydroalanine) (PDha) is reported. Chemically crosslinked PDha with bis-epoxy poly(ethylene glycol) leads to a transparent, self-supporting hydrogel. Due to the ionizable groups on PDha, this 3D polymeric matrix can be anionic, cationic, or zwitterionic depending on the pH value, and its high density of dynamic charges has a potential for electrostatic attachment of charged molecules. The integration of the cationic molecular photosensitizer [Ru(bpy)3 ]2+ (bpy = 2,2'-bipyridine) is realized, which is a reversible process controlled by pH, leading to light harvesting hydrogels. They are further combined with either a thiomolybdate catalyst ([Mo3 S13 ]2- ) for hydrogen evolution reaction (HER) or a cobalt polyoxometalate catalyst (Co4 POM = [Co4 (H2 O)2 (PW9 O34 )2 ]10- ) for oxygen evolution reaction (OER). Under the optimized condition, the resulting hydrogels show catalytic activity in both cases upon visible light irradiation. In the case of OER, higher photosensitizer stability is observed compared to homogeneous systems, as the polymer environment seems to influence decomposition pathways.

Stable water splitting using photoelectrodes with a cryogelated overlayer

Hydrogen production techniques based on solar-water splitting have emerged as carbon-free energy systems. Many researchers have developed highly efficient thin-film photoelectrochemical (PEC) devices made of low-cost and earth-abundant materials. However, solar water splitting systems suffer from short lifetimes due to catalyst instability that is attributed to both chemical dissolution and mechanical stress produced by hydrogen bubbles. A recent study found that the nanoporous hydrogel could prevent the structural degradation of the PEC devices. In this study, we investigate the protection mechanism of the hydrogel-based overlayer by engineering its porous structure using the cryogelation technique. Tests for cryogel overlayers with varied pore structures, such as disconnected micropores, interconnected micropores, and surface macropores, reveal that the hydrogen gas trapped in the cryogel protector reduce shear stress at the catalyst surface by providing bubble nucleation sites. The cryogelated overlayer effectively preserves the uniformly distributed platinum catalyst particles on the device surface for over 200 h. Our finding can help establish semi-permanent photoelectrochemical devices to realize a carbon-free society.

Electrochemical Evolution of Ru-Based Polyoxometalates into Si,W-Codoped RuOx for Acidic Overall Water Splitting

Despite intensive studies over decades, the development of electrocatalysts for acidic water splitting still relies on platinum group metals, especially Pt and Ir, which are scarce, expensive, and poorly sustainable. Because such problems can be alleviated, Ru-based bifunctional catalysts such as rutile RuO2 have recently emerged. However, RuO2 has a relatively low activity for hydrogen evolution reactions (HER) and low stability for oxygen evolution reactions (OER) under acidic conditions. In this study, the synthesis of a RuOx -based bifunctional catalyst (RuSiW) for acidic water splitting via the electrochemical evolution from Ru-based polyoxometalates at cathodic potentials is reported. RuSiW consists of the nanocrystalline RuO2 core and Si,W-codoped RuOx shell. RuSiW exhibits outstanding HER and OER activity comparable to Pt/C and RuO2 , respectively, with high stability. Computational analysis suggests that the codoping of RuOx with W and Si synergistically improves the HER activity of otherwise poor RuO2 by shifting the d-band center and optimizing atomic configurations beneficial for proper hydrogen adsorption. This study provides insights into the design and synthesis of unprecedented bifunctional electrocatalysts using catalytically inactive and less explored elements, such as Si and W.

Bubble Management for Electrolytic Water Splitting by Surface Engineering: A Review

During electrocatalytic water splitting, the management of bubbles possesses great importance to reduce the overpotential and improve the stability of the electrode. Bubble evolution is accomplished by nucleation, growth, and detachment. The expanding nucleation sites, decreasing bubble size, and timely detachment of bubbles from the electrode surface are key factors in bubble management. Recently, the surface engineering of electrodes has emerged as a promising strategy for bubble management in practical water splitting due to its reliability and efficiency. In this review, we start with a discussion of the bubble behavior on the electrodes during water splitting. Then we summarize recent progress in the management of bubbles from the perspective of surface physical (electrocatalytic surface morphology) and surface chemical (surface composition) considerations, focusing on the surface texture design, three-dimensional construction, wettability coating technology, and functional group modification. Finally, we present the principles of bubble management, followed by an insightful perspective and critical challenges for further development.

Superhydrophilic CoFe Dispersion of Hydrogel Electrocatalysts for Quasi-Solid-State Photoelectrochemical Water Splitting

Photoelectrochemical (PEC) water splitting is an attractive strategy to convert solar energy to hydrogen. However, the lifetime of PEC devices is restricted by the photocorrosion of semiconductors and the instability of co-catalysts. Herein, we report a feasible in situ inherent cross-linking method for stabilizing semiconductors that uses a CoFe-dispersed polyacrylamide (PAM) hydrogel as a transparent protector. The CoFe-PAM hydrogel protected BiVO4 (BVO) photoanode reached a photocurrent density of 5.7 mA cm-2 at 1.23 VRHE under AM 1.5G illumination with good stability. The PAM hydrogel network improved the loading of Fe sites while enabling the retention of more CoFe co-catalysts and increasing the electron density of the reaction active sites, further improving the PEC performance and stability. More importantly, by tuning the polymerization network, we pioneer the use of quasi-solid-state electrolytes in photoelectrochemistry, where the high concentration of ionic solvent in the PAM hydrogel ensures effective charge transport and good water storage owing to the hydrophilic and porous structure of the hydrogel. This work expands the scope of PEC research by providing a class of three-dimensional hydrogel electrocatalysts and quasi-solid-state electrolytes with huge extension potential, and the versatility of these quasi-solid-state electrolytes can be employed for other semiconductors.

Cellulose Nanofiber-Alginate Biotemplated Cobalt Composite Multifunctional Aerogels for Energy Storage Electrodes

Tunable porous composite materials to control metal and metal oxide functionalization, conductivity, pore structure, electrolyte mass transport, mechanical strength, specific surface area, and magneto-responsiveness are critical for a broad range of energy storage, catalysis, and sensing applications. Biotemplated transition metal composite aerogels present a materials approach to address this need. To demonstrate a solution-based synthesis method to develop cobalt and cobalt oxide aerogels for high surface area multifunctional energy storage electrodes, carboxymethyl cellulose nanofibers (CNF) and alginate biopolymers were mixed to form hydrogels to serve as biotemplates for cobalt nanoparticle formation via the chemical reduction of cobalt salt solutions. The CNF-alginate mixture forms a physically entangled, interpenetrating hydrogel, combining the properties of both biopolymers for monolith shape and pore size control and abundant carboxyl groups that bind metal ions to facilitate biotemplating. The CNF-alginate hydrogels were equilibrated in CaCl2 and CoCl2 salt solutions for hydrogel ionic crosslinking and the prepositioning of transition metal ions, respectively. The salt equilibrated hydrogels were chemically reduced with NaBH4, rinsed, solvent exchanged in ethanol, and supercritically dried with CO2 to form aerogels with a specific surface area of 228 m2/g. The resulting aerogels were pyrolyzed in N2 gas and thermally annealed in air to form Co and Co3O4 porous composite electrodes, respectively. The multifunctional composite aerogel's mechanical, magnetic, and electrochemical functionality was characterized. The coercivity and specific magnetic saturation of the pyrolyzed aerogels were 312 Oe and 114 emu/gCo, respectively. The elastic moduli of the supercritically dried, pyrolyzed, and thermally oxidized aerogels were 0.58, 1.1, and 14.3 MPa, respectively. The electrochemical testing of the pyrolyzed and thermally oxidized aerogels in 1 M KOH resulted in specific capacitances of 650 F/g and 349 F/g, respectively. The rapidly synthesized, low-cost, hydrogel-based synthesis for tunable transition metal multifunctional composite aerogels is envisioned for a wide range of porous metal electrodes to address energy storage, catalysis, and sensing applications.

Versatile bubble maneuvering on photopyroelectric slippery surfaces

Contactless bubble manipulation with a high spatiotemporal resolution brings a qualitative leap forward in a variety of applications. Despite considerable advances, light-induced bubble maneuvering remains challenging in terms of robust transportation, splitting and detachment. Here, a photopyroelectric slippery surface (PESS) with a sandwich structure is constructed to achieve the versatile bubble manipulation. Due to the generated dielectric wetting and nonuniform electric field under the irradiation of near infrared (NIR) light, a bubble is subject to both the Laplace force and dielectrophoresis force, enabling a high-efficiency bubble steering. We demonstrate that the splitting, merging and detachment of underwater bubbles can be achieved with high flexibility and precision, high velocity and agile direction maneuverability. We further extend the capability of bubble control to microrobots for cargo transportation, micropart assembly and transmission of gear structures. We envision this robust bubble manipulation strategy on the PESS would provide a valuable platform for various bubble-involved processes, ranging from microfluidic devices to soft robotics.

Biomimetic Approach toward Visible Light-Driven Hydrogen Generation Based on a Porphyrin-Based Coordination Polymer Gel

There has been a widespread interest in developing self-assembled porphyrin nanostructures to mimic nature's light-harvesting processes. Herein, porphyrin-based coordination polymer gel (CPG) has been developed as a "soft" photocatalyst material for hydrogen (H₂) production from water under visible light. The CPG offers a hierarchical nanofibrous network structure obtained through self-assembly of a terpyridine alkyl-amide appended porphyrin (TPY-POR)-based low molecular weight gelator with ruthenium ions (Ru^II) and produces H₂ with a rate of 5.7 mmol g^-1 h^-1 in the presence of triethylamine (TEA) as a sacrificial electron donor. Further, the [Fe₂(bdt)(CO)₆] (dbt = 1,2-benzenedithiol) cocatalyst, which can mimic the activity of iron hydrogenase, is coassembled in the CPG and shows remarkable improvement in H₂ evolution (catalytic activity; rate ∼10.6 mmol g^-1 h^-1 and turnover number ∼1287). The significant enhancement in catalytic activity was supported by several controlled experiments, including femtosecond transient absorption (TA) spectroscopy and also DFT calculation. The TA study supported the cascade electron transfer process from porphyrin core to [Ru(TPY)₂]²⁺ center, and subsequently, the electron transfers to the cocatalyst [Fe₂(bdt)(CO)₆] for H₂ production.

Surfactant Improved Interface Morphology and Mass Transfer for Electrochemical Oxygen-Evolving Reaction

The surface microstructure of a catalyst coating layer directly affects the active area, hydrophilicity and hydrophobicity, and the high porosity is desirable especially for solid–liquid–gas three-phase catalytic reactions. However, it remains challenging to customize catalyst distribution during the coating process. Here, we report a simple strategy for achieving ultrafine nanocatalyst deposition in a porous structure via introducing the surfactant into coating inks. For a proof-of-concept demonstration, we spin-coated the nanoscale IrO2 sol with a surfactant of sodium dodecyl sulfate (SDS) onto the glassy carbon (GC) electrode for oxygen evolution reaction (OER). Due to the surfactant action, the deposited IrO2 nanocatalyst is evenly distributed and interconnected into a highly porous overlayer, which facilitates electrolyte permeation, gas bubble elimination and active-site accessibility, thus affording high-performance OER in alkaline media. Particularly, the SDS-modified electrodes enable the industrial-level high-current-density performance via enhanced mass transfer kinetics. Such manipulation is effective to improve the coating electrodes’ catalytic activity and stability, and scalable for practical applications and suggestive for other gas-evolving electrodes.

Engineered Living Bacteriophage-Enabled Self-Adjuvanting Hydrogel for Remodeling Tumor Microenvironment and Cancer Therapy

Due to the complexity and heterogeneity in the tumor microenvironment, the efficacy of breast cancer treatment has been significantly impeded. Here, we established a living system using an engineered M13 bacteriophage through chemical cross-linking and biomineralization to remodel the tumor microenvironment. Chemically cross-linking of the engineered bacteriophage gel (M13 Gel) could in situ synthesize photothermal palladium nanoparticles (PdNPs) on the pVIII capsid protein to obtain M13@Pd Gel. In addition, NLG919 was further loaded into a gel to form (M13@Pd/NLG gel) for down-regulating the expression of tryptophan metabolic enzyme indoleamine 2,3-dioxygenase 1 (IDO1). Both in vitro and in vivo studies showed that the M13 bacteriophage served not only as a cargo-loaded device but also as a self-immune adjuvant, which induced the immunogenic death of tumor cells effectively and down-regulated IDO1 expression. Such a bioactive gel system constructed by natural living materials could reverse immunosuppression and significantly improve the anti-breast cancer response.

A polymeric hydrogel electrocatalyst for direct water oxidation

Metal-free electrocatalysts represent a main branch of active materials for oxygen evolution reaction (OER), but they excessively rely on functionalized conjugated carbon materials, which substantially restricts the screening of potential efficient carbonaceous electrocatalysts. Herein, we demonstrate that a mesostructured polyacrylate hydrogel can afford an unexpected and exceptional OER activity - on par with that of benchmark IrO₂ catalyst in alkaline electrolyte, together with a high durability and good adaptability in various pH environments. Combined theoretical and electrokinetic studies reveal that the positively charged carbon atoms within the carboxylate units are intrinsically active toward OER, and spectroscopic operando characterizations also identify the fingerprint superoxide intermediate generated on the polymeric hydrogel backbone. This work expands the scope of metal-free materials for OER by providing a new class of polymeric hydrogel electrocatalysts with huge extension potentials.

Recent Advances and Future Perspectives of Metal-Based Electrocatalysts for Overall Electrochemical Water Splitting

Recently, the growing demand for a renewable and sustainable fuel alternative is contingent on fuel cell technologies. Even though it is regarded as an environmentally sustainable method of generating fuel for immediate concerns, it must be enhanced to make it extraordinarily affordable, and environmentally sustainable. Hydrogen (H₂ ) synthesis by electrochemical water splitting (ECWS) is considered one of the foremost potential prospective methods for renewable energy output and H₂ society implementation. Existing massive H₂ output is mostly reliant on the steaming reformation of carbon fuels that yield CO₂ together with H₂ and is a finite resource. ECWS is a viable, efficient, and contamination-free method for H₂ evolution. Consequently, developing reliable and cost-effective technology for ECWS was a top priority for scientists around the globe. Utilizing renewable technologies to decrease total fuel utilization is crucial for H₂ evolution. Capturing and transforming the fuel from the ambient through various renewable solutions for water splitting (WS) could effectively reduce the need for additional electricity. ECWS is among the foremost potential prospective methods for renewable energy output and the achievement of a H₂ -based economy. For the overall water splitting (OWS), several transition-metal-based polyfunctional metal catalysts for both cathode and anode have been synthesized. Furthermore, the essential to the widespread adoption of such technology is the development of reduced-price, super functional electrocatalysts to substitute those, depending on metals. Many metal-premised electrocatalysts for both the anode and cathode have been designed for the WS process. The attributes of H₂ and oxygen (O₂ ) dynamics interactions on the electrodes of water electrolysis cells and the fundamental techniques for evaluating the achievement of electrocatalysts are outlined in this paper. Special emphasis is paid to their fabrication, electrocatalytic performance, durability, and measures for enhancing their efficiency. In addition, prospective ideas on metal-based WS electrocatalysts based on existing problems are presented. It is anticipated that this review will offer a straight direction toward the engineering and construction of novel polyfunctional electrocatalysts encompassing superior efficiency in a suitable WS technique.

Substrate effect on hydrogen evolution reaction in two-dimensional Mo2C monolayers

The physical and chemical properties of atomically thin two-dimensional (2D) materials can be modified by the substrates. In this study, the substrate effect on the electrocatalytic hydrogen evolution reaction (HER) in 2D Mo₂C monolayers was investigated using first principles calculations. The isolated Mo₂C monolayer shows large variation in HER activity depending on hydrogen coverage: it has relatively low activity at low hydrogen coverage but high activity at high hydrogen coverage. Among Ag, Au, Cu, and graphene substrates, the HER activity is improved on the Ag and Cu substrates especially at low hydrogen coverage, while the effects of the Au and graphene substrates on the HER activity are insignificant. The improvement is caused by the charge redistribution in the Mo₂C layer on the substrate, and therefore the HER activity becomes high for any hydrogen coverage on the Ag and Cu substrates. Our results suggest that, in two-dimensional electrocatalysis, the substrate has a degree of freedom to tune the catalytic activity.

Platinum Cluster/Carbon Quantum Dots Derived Graphene Heterostructured Carbon Nanofibers for Efficient and Durable Solar-Driven Electrochemical Hydrogen Evolution

Large scale solar-driven hydrogen production is a crucial step toward decarbonizing society. However, the solar-to-hydrogen (STH) conversion efficiency, long-term stability, and cost-effectiveness in hydrogen evolution reaction (HER) still need to be improved. Herein, an efficient approach is demonstrated to produce low-dimensional Pt/graphene-carbon nanofibers (CNFs)-based heterostructures for bias-free, highly efficient, and durable HER. Carbon dots are used as efficient building blocks for the in situ formation of graphene along the CNFs surface. The presence of graphene enhances the electronic conductivity of CNFs to ≈3013.5 S m^-1  and simultaneously supports the uniform Pt clusters growth and efficient electron transport during HER. The electrode with a low Pt loading amount (3.4 µg cm^-2 ) exhibits a remarkable mass activity of HER in both acidic and alkaline media, which is significantly better than that of commercial Pt/C (31 µg cm^-2  of Pt loading). In addition, using a luminescent solar concentrator-coupled solar cell to provide voltage, the bias-free water splitting system exhibits an STH efficiency of 0.22% upon one-sun illumination. These results are promising toward using low-dimensional heterostructured catalysts for future energy storage and conversion applications.

A new MoCN monolayer containing stable cyano structural units as a high-efficiency catalyst for the hydrogen evolution reaction

In the hydrogen evolution reaction (HER), it is essential to find a high-efficiency and nonprecious electrocatalyst comparable to Pt, which needs to have rich inherently active sites and good conductivity. By combining a global minimum structure search and first-principles calculations, a hitherto unknown 2D MoCN monolayer was found, which can be considered as a structure in which Mo atoms interact with the stable CN units through triple bonds. The resultant MoCN monolayer possesses superior thermodynamic, dynamic, thermal, and mechanical stabilities, as well as inherent metallicity. In particular, it can exhibit outstanding HER catalytic activity due to the presence of many active sites with near-zero ΔG_H* values, whose density totals 1.80 × 10¹⁵ sites per cm², even more than Pt. In addition, we also propose a series of other 2D monolayers containing stable CN units (i.e., MoC₂N, MoCN₂ and MoC₂N₂), all of which can uniformly show high stability and good HER catalytic activity. Applying strain can further effectively improve the activities of C-rich (MoC₂N) and N-rich (MoCN₂) monolayers, inducing considerably high HER catalytic performance. For the MoCN, MoC₂N and MoCN₂ monolayers, the most active sites are located at the Mo-C-N chain involved. All these fascinating findings can not only provide new excellent candidates but also new insights into the design of highly efficient and nonprecious HER electrocatalysts as an alternative to Pt in the near future.

CO2 Reduction on Single-Atom Ir Catalysts with Chemical Functionalization

As promising catalytic systems, single-atom catalysts (SACs) demonstrate improved catalytic performance for electrochemical reactions. However, the pinning of metal atoms on surfaces usually depends on the adsorption on defects. In...

Janus Mo2P3 Monolayer as an Electrocatalyst for Hydrogen Evolution

The rational design of low-cost electrocatalysts with the desired performance is the core of the large-scale hydrogen production from water. Two-dimensional materials with high specific surface area and excellent electron properties are ideal candidates for electrocatalytic water splitting. Herein, we identify a hitherto unknown Mo₂P₃ monolayer with a Janus structure (i.e., out-of-plane asymmetry) through first-principle structure search calculations. Its inherent metallicity ensures good electrical conductivity. Notably, its catalytic activity is comparable to that of Pt and the density of active sites is up to 2.65 × 10¹⁵ site/cm² owing to the Mo → P charge transfer enhancing the catalytic activity of P atoms and asymmetric structure exposing more active sites to the surface. The Mo₂P₃ monolayer can spontaneously produce hydrogen through the Volmer-Heyrovsky pathway. These excellent performances can be well maintained under strain. The coexistence of covalent and ionic bonds results in Mo₂P₃ having high stability. All these excellent properties make the Mo₂P₃ monolayer a promising candidate for electrocatalytic water splitting.

Structural and Componential Engineering of Co2P&CoP@N-C Nanoarrays for Energy-Efficient Hydrogen Production from Water Electrolysis

The development of electrocatalysts for efficient water splitting is a pivotal and challenging task. Transition-metal phosphides (TMPs) have been known as one of the most promising candidates for the efficient hydrogen evolution reaction (HER) due to their favorable intrinsic reactivity. However, structural engineering related to the gas bubbles evolution and tiny regulation of components concerned with the electronic structure remained as a significant challenge that requires further optimization. Herein, the nanoarrays (NAs) composed of ultrasmall Co₂P and CoP nanoparticle-embedded N-doped carbon matrix (Co₂P&CoP@N-C) are prepared and demonstrated an overpotential of 62.8 ± 4.7 mV at 10 mA cm^-2 in 1.0 M KOH. The nanoarray-structured electrocatalyst revealed the superaerophobicity and facilitates the detachment of the in situ formed hydrogen gas bubbles, ensuring abundant catalytic sites and electrode-electrolyte interface for the mass transfer process. The amount of P doping modulated the local electron density around Co and P atoms, which attains a favorable compromise to afford sufficient electrons for the electrocatalysis and inhibit the negative influence of H₂ desorption. Significantly, the lowered overpotential induced by the electrocatalyst surface architecture is much stronger than that of the component content and promotes the electrocatalytic activity.

A platinum nanoparticle doped self-assembled peptide bolaamphiphile hydrogel as an efficient electrocatalyst for the hydrogen evolution reaction

Noble metal-based nanomaterials have shown great potential for catalytic application with higher selectivity and activity. Owing to their self-assembly properties with various molecular interactions, peptides play an essential role in the controlled synthesis of noble metal-based catalysts with high surface area. In this work, a phenylalanine (F) and tyrosine (Y) based peptide bolaamphiphile is prepared by solution-phase peptide synthesis. The peptide bolaamphiphile readily self-assembles into a hydrogel with a cross-linked nanofibrillar network. The platinum nanoparticles (Pt NPs) are in situ generated within the cross-linked nanofibrillar network of the hydrogel matrix of the peptide bolaamphiphile. Benefiting from the synergistic properties of the Pt nanoparticles doped on three-dimensional fibrous networks, Pt6@hydrogel shows efficient catalytic activity for the electrochemical hydrogen evolution reaction (HER) in 0.5 M H2SO4 solution. The Pt6@hydrogel requires an overpotential of 45 mV at -10 mA cm-2 with a Tafel slope of 52 mV dec-1. The Pt6@hydrogel also shows electrocatalytic activity in basic and neutral pH solutions. The excellent activity and stability of Pt6@hydrogel for the HER shows great potential for energy conversion applications.

Dissecting Biological and Synthetic Soft-Hard Interfaces for Tissue-Like Systems

Soft and hard materials at interfaces exhibit mismatched behaviors, such as mismatched chemical or biochemical reactivity, mechanical response, and environmental adaptability. Leveraging or mitigating these differences can yield interfacial processes difficult to achieve, or inapplicable, in pure soft or pure hard phases. Exploration of interfacial mismatches and their associated (bio)chemical, mechanical, or other physical processes may yield numerous opportunities in both fundamental studies and applications, in a manner similar to that of semiconductor heterojunctions and their contribution to solid-state physics and the semiconductor industry over the past few decades. In this review, we explore the fundamental chemical roles and principles involved in designing these interfaces, such as the (bio)chemical evolution of adaptive or buffer zones. We discuss the spectroscopic, microscopic, (bio)chemical, and computational tools required to uncover the chemical processes in these confined or hidden soft-hard interfaces. We propose a soft-hard interaction framework and use it to discuss soft-hard interfacial processes in multiple systems and across several spatiotemporal scales, focusing on tissue-like materials and devices. We end this review by proposing several new scientific and engineering approaches to leveraging the soft-hard interfacial processes involved in biointerfacing composites and exploring new applications for these composites.

Electrochemical Visualization of Gas Bubbles on Superaerophobic Electrodes Using Scanning Electrochemical Cell Microscopy

Electrocatalytic gas evolution reactions, where gaseous molecules are electrogenerated by reduction or oxidation of a species, play a central role in many energy conversion systems. Superaerophobic electrodes, usually constructed by their surface microstructures, have demonstrated excellent performance for electrochemical gas evolution reactions due to their bubble-repellent properties. Understanding and quantification of the gas bubble behavior including nucleation and dynamics on such microstructured electrodes is an important but underexplored issue. In this study, we reported a scanning electrochemical cell microscopy (SECCM) investigation of individual gas bubble nucleation and dynamics on nanoscale electrodes. A classic Pt film and a nonconventional transition-metal dichalcogenide MoS₂ film with different surface topologies were employed as model substrates for both H₂ and N₂ bubble electrochemical studies. Interestingly, the nanostructured catalyst surface exhibit significantly less supersaturation for gas bubble nucleation and a notable increase of bubble detachment compared to its flat counterpart. Electrochemical mapping results reveal that there is no clear correlation between bubble nucleation and hydrogen evolution reaction (HER) activity, regardless of local electrode surface microstructures. Our results also indicate that while the hydrophobicity of the nanostructured MoS₂ surface promotes bubble nucleation, it has little effect on bubble dynamics. This work introduces a new method for nanobubble electrochemistry on broadly interesting catalysts and suggests that the deliberate microstructure on a catalyst surface is a promising strategy for improving electrocatalytic gas evolution both in terms of bubble nucleation and elimination.

Wetting-regulated gas-involving (photo)electrocatalysis: biomimetics in energy conversion

(Photo)electrolysis of water or gases with water to species serving as industrial feedstocks and energy carriers, such as hydrogen, ammonia, ethylene, propanol, etc., has drawn tremendous attention. Moreover, these processes can often be driven by renewable energy under ambient conditions as a sustainable alternative to traditional high-temperature and high-pressure synthesis methods. In addition to the extensive studies on catalyst development, increasing attention has been paid to the regulation of gas transport/diffusion behaviors during gas-involving (photo)electrocatalytic reactions towards the goal of creating industrially viable catalytic systems with high reaction rates, excellent long-term stabilities and near-unity selectivities. Biomimetic surfaces and systems with special wetting capabilities and structural advantages can shed light on the future design of (photo)electrodes and address long-standing challenges. This article is dedicated to bridging the fields of wetting and catalysis by reviewing the cutting-edge design methodologies of both gas-evolving and gas-consuming (photo)electrocatalytic systems. We first introduce the fundamentals of various in-air/underwater wetting states and their corresponding bioinspired structural properties. The relationship amongst the bubble transport behavior, wettability, and porosity/tortuosity is also discussed. Next, the latest implementations of wetting-related design principles for gas-evolving reactions (i.e. the hydrogen evolution reaction and oxygen evolution reaction) and gas-consuming reactions (i.e. the oxygen reduction reaction and CO2 reduction reaction) are summarized. For photoelectrode designs, additional factors are taken into account, such as light absorption and the separation, transport and recombination of photoinduced electrons and holes. The influences of wettability and 3D structuring of (photo)electrodes on the catalytic activity, stability and selectivity are analyzed to reveal the underlying mechanisms. Finally, remaining questions and related future perspectives are outlined.

Fabrication of Chiral M13 Bacteriophage Film by Evaporation-Induced Self-Assembly

Biomacromolecules are likely to undergo self-assembly and show specific collective behavior concentrated in the medium. Although the assembly procedures have been studied for unraveling their mysteries, there are few cases to directly demonstrate the collective behavior and phase transition process in dynamic systems. In the contribution, the drying process of M13 droplet is investigated, and can be successfully simulated by a doctor blade coating method. The morphologies in the deposited film are measured by atomic force microscopy and the liquid crystal phase development is captured in real time using polarized optical microscope. Collective behaviors near the contact line are characterized by the shape of meniscus curve and particle movement velocity. With considering rheological properties and flow, the resultant chiral film is used to align gold nanorods, and this approach can suggest a way to use M13 bacteriophage as a scaffold for the multi-functional chiral structures.

Atomically Dispersed Reactive Centers for Electrocatalytic CO2 Reduction and Water Splitting

Developing electrocatalytic energy conversion technologies for replacing the traditional energy source is highly expected to resolve the fossil fuel exhaustion and related environmental problems. Exploring stable and high-efficiency electrocatalysts is of vital importance for the promotion of these technologies. Single-atom catalysts (SACs), with atomically distributed active sites on supports, perform as emerging materials in catalysis and present promising prospects for a wide range of applications. The rationally designed near-range coordination environment, long-range electronic interaction and microenvironment of the coordination sphere cast huge influence on the reaction mechanism and related catalytic performance of SACs. In the current Review, some recent developments of atomically dispersed reactive centers for electrocatalytic CO2 reduction and water splitting are well summarized. The catalytic mechanism and the underlying structure-activity relationship are elaborated based on the recent progresses of various operando investigations. Finally, by highlighting the challenges and prospects for the development of single-atom catalysis, we hope to shed some light on the future research of SACs for the electrocatalytic energy conversion.

Water Splitting: From Electrode to Green Energy System

Hydrogen (H2) production is a latent feasibility of renewable clean energy. The industrial H2 production is obtained from reforming of natural gas, which consumes a large amount of nonrenewable energy and simultaneously produces greenhouse gas carbon dioxide. Electrochemical water splitting is a promising approach for the H2 production, which is sustainable and pollution-free. Therefore, developing efficient and economic technologies for electrochemical water splitting has been an important goal for researchers around the world. The utilization of green energy systems to reduce overall energy consumption is more important for H2 production. Harvesting and converting energy from the environment by different green energy systems for water splitting can efficiently decrease the external power consumption. A variety of green energy systems for efficient producing H2, such as two-electrode electrolysis of water, water splitting driven by photoelectrode devices, solar cells, thermoelectric devices, triboelectric nanogenerator, pyroelectric device or electrochemical water-gas shift device, have been developed recently. In this review, some notable progress made in the different green energy cells for water splitting is discussed in detail. We hoped this review can guide people to pay more attention to the development of green energy system to generate pollution-free H2 energy, which will realize the whole process of H2 production with low cost, pollution-free and energy sustainability conversion.

Achieving high hydrogen evolution reaction activity of a Mo2C monolayer

Two-dimensional Mo2C materials (1T and 2H phases) have emerged as promising electrocatalysts for the hydrogen evolution reaction (HER) due to their low cost, inherent metallicity, and high stability. Unfortunately, the catalytic activity of Mo2C is lower than that of Pt, and it needs to be substantially improved for practical applications. It is necessary and urgent to consider the effect of synergetic interactions among defects, functions, and strain on the HER activity. In this study, the geometric structures, electronic properties, and the HER activity of the Mo2C monolayer, with vacancy defects (i.e. Mo and C), oxygen functionalization, and strain, are studied by using first-principles calculations. According to our results, the combination of Mo vacancies, which can be obtained under C-rich conditions, and oxygen functionalization is the most effective way to improve the HER activity of 1T- and 2H-Mo2C. Considering the abundant active sites and optimal Gibbs free energy of hydrogen adsorption, the 1T phase we obtained shows excellent HER activity even at high H coverage and improves the utilization of active sites, for which the HER activity is comparable to that of Pt. This can be attributed to the fact that oxygen atoms gain more electrons from Mo2C, which weakens the strength of the O-H bond. Our work provides not only an opportunity to better understand the catalytic mechanism, but also a guide to achieving high HER activity of a Mo2C monolayer.