Large-scale preparation for efficient polymer-based room-temperature phosphorescence via click chemistry

Efficient energy phosphorescence transfer and reversible phosphorescence in aromatic heterocyclic doped systems for advanced information storage

Organic room-temperature phosphorescent (RTP) materials have garnered significant attention in recent years due to their unique advantages, including diverse molecular structures, excellent biocompatibility, and favorable processability. Aromatic heterocyclic groups are known to effectively promote intersystem crossing (ISC), leading to a wide range of applications in this field. In this study, dibenzo[a,c]phenazin-11-yl(phenyl)methanone (DPM) was used as an energy acceptor, doped with the host material benzophenone (BP) and its derivatives (BP-R) as energy donors. After simple mixing and thorough mechanical grinding of both the host and guest components, photophysical process such as Phosphorescence resonance energy transfer (PRET) was activated, resulting in RTP emission. The doped system exhibited efficient golden-yellow phosphorescent emission with a phosphorescence lifetime of 196 ms and quantum yield of 30.5 %. Surprisingly, the DPM@PMMA film exhibits a gold-colored room-temperature phosphorescent emission and can be switched "on" and "off" with reversible phosphorescence by exposing the film to acidic and alkaline gases. Notably, the phosphorescent emission properties remain stable after multiple cycles. This doping system is further applied to various methods of information storage and encryption, highlighting its potential for multi-scenario applications.

A general strategy for self-healing elastomers with ultralong room-temperature phosphorescence

Integration of room-temperature phosphorescence (RTP) into elastic matrices with persistent segment motions to build RTP elastomers is a trend for future flexible sensors and stretchable optics, which remains a critical challenge. Here, we present a general approach to creating self-healing phosphorescent elastomers (HPEs) via dynamic B-O bonds, which ensure that various commercial phosphors achieve ultralong RTP in silicone rubber systems. The resulting HPEs exhibit remarkable RTP lifetimes (up to 2.679 s) under ambient conditions, surpassing all previously reported RTP elastomers. Notably, this general method affords HPE films with uniform RTP performance across areas ranging from 1 × 1 cm2 to 45 × 50 cm2, and even larger sizes. With the assistance of self-healing properties, HPEs can be easily structurally transformed from 2D to 3D models (e.g., plate film to Möbius ring). The HPEs have potential applications in multi-patterned displays and time-dependent encryption, and this work provides a general and scalable solution for the production of long-lived RTP elastomers.

Supramolecular Entanglement Driven Emissive Aggregate Densification Enabling Room-Temperature Phosphorescence Hydrogels with Ultrastretchability and Crack-Tolerance

Polymeric room temperature phosphorescence (RTP) hydrogels are emerging candidates for many advanced photonic applications. Unfortunately, phosphorescence of the introduced RTP chromophores can easily be quenched in water-swollen hydrogel networks, limiting their luminescence performance and application adaptability. Herein, we propose a supramolecular confinement-entanglement synergy strategy to produce ultrastretchable RTP hydrogels by in-situ polymerizing high-concentration 2-(acryloyloxy)ethyl trimethylammonium chloride (AETC) in the presence of preassembled 4-biphenylboronic acid@β-cyclodextrin (4-BB@β-CD) emissive aggregates. The hyper-entangled poly(AETC) (PAETC) chains, formed under water-limiting conditions, synergistically densify the 4-BB@β-CD aggregates through supramolecular confinement, effectively suppressing molecular vibrations and stabilizing triplet states. Impressively, the hydrogels exhibit intense afterglow and ultralong phosphorescence lifetime up to 1.1 s under room conditions. Crucially, the entanglement-dominated physical network free of static chemical crosslinking enables continuing chain disentanglement during stretching for efficient energy dissipation. Segment length between physical entanglement points can thus be significantly enlarged to reduce network fracture and avoid crack propagation, achieving record-breaking uniaxial/biaxial (21 000%/10 000%) stretchability. Even the notched hydrogels are capable of being unprecedentedly stretched to 20 500% and exhibit a fracture energy as high as 157 kJ m⁻2, demonstrating intrinsic crack-tolerance. This study opens new avenues of polymeric RTP hydrogels by bringing superior mechanical performance and should merit their application exploration.

Water-Resistant Organic Room-Temperature Phosphorescence from Block Copolymers

Room-temperature phosphorescence (RTP) polymers have demonstrated significant potential for various applications due to their unique luminescent properties. However, most conventional RTP polymers are vulnerable to moisture and water, which can disrupt the hydrogen bonding network within the polymer and accelerate the non-radiative decay of triplet excitons of phosphors, leading to the quenching of RTP. Herein, we present a universal strategy to achieve water-resistant RTP polymers by designing amphiphilic block copolymers with microphase-separated structures. Specifically, the rigid hydrophilic phase, which is rich in carboxyl groups, forms hydrogen bonds that suppress non-radiative decay of the chromophores, resulting in RTP. Meanwhile, the hydrophobic phase effectively prevents water molecules from penetrating and disrupting the rigid polymer network. By combining the functions of both the hydrophilic and hydrophobic phases, the resulting RTP copolymers exhibit good water-resistant properties. Even after being immersed in water for one month, the copolymers maintain a green afterglow with a lifetime of 629 ms. Moreover, the water-resistant nature of these RTP polymers has also been demonstrated in potential applications of afterglow displays and anti-counterfeiting. This research offers valuable insights into the design of RTP materials with stability in aqueous environments and broadens the scope of their potential applications in diverse settings.

Organic Ionic Host-Guest Phosphor with Dual-Confined Nonradiation for Constructing Ultrahigh-Temperature X-ray Scintillator

Scintillators with X-ray-excitable luminescence have attracted great attention in the fields of medical radiography, nondestructive inspection, and high-energy physics. However, thermal quenching significantly reduces radioluminescence efficiency, particularly for those phosphorescent scintillators with promising radiation-induced triplet exciton utilization, ultimately limiting their applications in high-temperature scenarios. Herein, we develop ultrahigh-temperature scintillators based on organic ionic host-guest phosphorescence systems with unprecedented thermal-stable emissions up to 673 K. The guest phosphor features spin-vibronic coupling-assisted intersystem crossing, effectively transforming phosphorescence to thermally activated delayed fluorescence for overcoming thermal inactivation of triplet excitons. Meanwhile, the rigid ionic host and guest with robust electrostatic interactions minimize both the intrinsic and extrinsic nonradiations of excitons, the so-called dual-confined nonradiation. These two mechanisms work synergistically, contributing to the highly efficient triplet exciton-based luminescence with a room-temperature phosphorescence efficiency of 38.7% and ultrahigh-temperature-resistant dual emissions. Such an innovative ionic host-guest scintillator achieves an impressively low X-ray detection limit of 71.5 nGy s-1 and remarkably bright photoluminescence (efficiency of 80.4% at 483 K), enabling ultrahigh-temperature X-ray imaging.

Disturbance-Triggered Instant Crystallization Activating Bioinspired Emissive Gels

Many marine organisms feature sensitive sensory-perceptual systems to sense the surrounding environment and respond to disturbance with intense bioluminescence. However, it remains a great challenge to develop artificial materials that can sense external disturbance and simultaneously activate intense luminescence, although such materials are attractive for visual sensing and intelligent displays. Herein, we present a new class of bioinspired smart gels constructed by integrating hydrophilic polymeric networks, metastable supersaturated salt and fluorophores containing heterogenic atoms. Upon external disturbance, the composite gels undergo an instant and reversible soft-rigid state transition, simultaneously turning on intense fluorescence and activating ultralong afterglow emission with a maximum lifetime of 877.15 ms. The experimental results and molecular dynamics simulations reveal that the disturbance-induced luminescence mainly results from the geometrical confinement of aggregated fluorophores and enhanced molecular interactions to immensely suppress the non-radiative dissipation. Given their versatile and sensitive disturbance-responsiveness, dynamic interactive painting and 3D smart optical displays are demonstrated. This study paves a new avenue to achieve disturbance-sensing soft materials and promotes the development of smart visual sensors and interactive optical displays.

Leveraging Multivalent Assembly towards High-Temperature Liquid-Phase Phosphorescence

High-temperature phosphorescence (HTP) materials have attracted considerable attention owing to their expanded application prospects, whereas they still suffer from severe deactivation in polar media, limiting their reliability and utility. Here, we present an efficient multivalent assembly strategy to achieve high-temperature liquid-phase phosphorescence (HTLP). The supramolecular assembly of multivalent modules leads to extremely robust hydrogen-bonding networks, which firmly immobilize the organic phosphors and protect triplet excitons from annihilation in high-temperature polar media, resulting in excellent HTLP emission. Moreover, the photophysical properties of HTLP are significantly enhanced by boosting multivalent interactions using multitopic phosphors, demonstrating a visible afterglow of 5 s in boiling water, more than 2 s in dimethylsulfoxide at 460 K (187 °C), and a long lifetime of 70.3 ms in N-methylpyrrolidone at 476 K (203 °C). Based on their fluidity and robust HTLP emission, in situ microcracks detection of high-temperature operating instruments and spatial-time-temperature-resolved anticounterfeiting are demonstrated.

Recent progress in triplet energy transfer systems toward organic afterglow materials

Organic room-temperature phosphorescence (RTP) has shown potential applications in the fields of biomedical imaging, chemical sensing, anti-counterfeiting, and encryption. Inspired by natural photosynthesis, artificial light-harvesting systems based on the phosphorescence-type energy transfer (ET) from the triplet excited states of organic RTP emitters have emerged as promising candidates to expand organic afterglow materials and promote practical applications. This review presents a fundamental understanding of phosphorescence-type ET processes, including the one-step triplet-to-singlet ET, stepwise triplet-to-singlet-to-singlet ET, and triplet-to-triplet ET. We highlight significant advances in the design, modulation, and application of phosphorescence-type ET systems and provide an outlook on application prospects and challenges.

3D printable organic room-temperature phosphorescent materials and printed real-time sensing and display devices

Polymer-based host-guest organic room-temperature phosphorescent (RTP) materials are promising candidates for new flexible electronic devices. Nowadays, the insufficient fabrication processes of polymeric RTP materials have hindered the development of these materials. Herein, we propose a strategy to realize 3D printable organic RTP materials and have successfully demonstrated real-time sensing and display devices through a Digital Light Processing (DLP) 3D printing process. We have designed and synthesized the molecules EtCzBP, PhCzBP and PhCzPM with A-D-A structures. The crucial role of strong intramolecular charge transfer (ICT) at the lowest triplet states in achieving bright photo-activated phosphorescence in polymer matrices has also been demonstrated. 3D printable RTP resins were manufactured by doping emissive guest molecules into methyl methacrylate (MMA). Based on these resins, a series of complex 3D structures and smart temperature responsive RTP performances were obtained by DLP 3D printing. Additionally, these RTP 3D structures have been applied in real-time temperature sensing and display panels for the first time. This work not only provides a guiding strategy for the design of emissive guest molecules to realize photo-activated RTP in poly(methyl methacrylate) (PMMA), but also paves the way for the development of 3D-printable real-time sensing structures and new-concept display devices.

Pure Organic Thermally Activated Delayed Fluorescence Afterglow Polymers via Dopant Isomerization

N-(o-Cyanophenyl)carbazole can be dimerized at different positions, which may change excited state behaviors. Herein, 2,3'-dicyano-3,4'-di(carbazol-9-yl)biphenyl (D34C) is designed and synthesized and doped into polymers. However, we find that D34C does not exhibit room temperature phosphorescence but emits fluorescence (FL) and bright thermally activated delayed fluorescence (TADF) with lifetimes of hundreds of milliseconds, which is observed in diverse matrices such as PMMA, MBS, ABS, PS, HIPS, and SIS. The simple positional isomerization makes the abundant triplet excitons undergo only reverse intersystem crossing rather than room temperature phosphorescence (RTP) radiation, which is rather rare in organic doped polymers. Since the production of TADF afterglow requires a certain excitation time, the generally indistinguishable FL and TADF efficiencies are separated for the first time. This work not only provides novel TADF afterglow polymers with diverse mechanical properties but also will evoke the subtle design of conjugated organic molecules to dramatically change photoexcitation and emission behaviors.

Dual State Emissive AIE Active Carbon Dots with Matrix-Free Room Temperature Phosphorescence

Long-lived triplet excitons are kingmakers to generate high efficiency optoelectronic OLEDs. However, it is difficult to produce matrix-free solid state emissive room temperature phosphorescence (RTP) from carbon dots (CDs). In the present work, limited rotation of the two naphthol rings in (R)-1,1-Bi-2-naphthol (R-Binol) has been used to synthesize CDs aimed to obtain emission in the aggregated and RTP states. The R-Binol-derived CDs were prepared using an easy one-pot solvothermal treatment of the precursor. In-depth structural analysis reveals the presence of twisted naphthalene moiety that resists π-π stacking to make it dual emissive. These CDs are prone to accumulate producing spherical aggregates with 32-fold enhanced emission in binary THF-water mixture. Nevertheless, for the first time, we harvested triplet excitons from matrix free CDs generating 23 % PLQY. A phosphor converted light emitting diode (pc-LED) was also fabricated with the CDs.

Dynamic Organic Phosphorescence Glass by Rigid-Soft Coupling

Organic phosphorescence glass has garnered considerable attention owing to the excellent shaping ability and photophysical behavior, but facile construction from single-component phosphors is still challenging. Herein, a rigid-soft coupling design is adopted in organic phosphors of ICO, CCO and PCO, thus preparing phosphorescence glasses through melting-quenching method to give excellent shaping ability and dynamic phosphorescence. RTP performance is significantly enhanced in the dense-structure glass, and intriguing high-temperature phosphorescence (HTP) is still observable even at 400 K. Direct patterning under UV irradiation is also achieved using photolithography technique, allowing for the creation of high-quality afterglow patterns that can be reversibly erased and rewritten. This rigid-soft conformation in organic phosphors elucidates a promising concept for achieving efficient RTP glass with wide application prospects.

Activating Ultralong Room-Temperature Phosphorescence of Mono-Ring Arylboronic Acid by Hydrogen Bond for Tunable Afterglow Color and Stimulus Response

Activating the ultralong room-temperature phosphorescence (RTP) of mono-ring arylboronic acid remains a great challenge, because the capacious free spaces shaped by a rubbery polymeric matrix allow the benzene ring skeleton to freely rotate. Herein, the ultralong RTP in mono-ring arylboronic acid derivatives embedded in a polyvinyl alcohol (PVA) matrix is activated, leveraging enhanced intermolecular and intramolecular hydrogen bonding and activating ultralong RTP. By incorporating diverse PBA derivatives into PVA via click chemistry, 3-aminophenylboronic acid (3A-PBA) doped PVA films showcase the most extended RTP lifetimes (2.24 s) and a high quantum yield (11.2%), alongside rapid and sensitive explosive vapor detection capabilities. These findings not only address the activation challenges of RTP in organic systems by highlighting the crucial role of hydrogen bonding and Förster resonance energy transfer in color tunability, but also mark a significant stride toward overcoming the limitations of current luminescent materials. This work heralds a new era in the development of organic phosphorescent materials, offering a promising strategy for broadening their practical applications and enhancing performance, particularly in environmental monitoring and security.

Photoinduced On and Off Polymeric Room Temperature Phosphorescence Based On Polycyclic Aromatic Hydrocarbon Isomers

As family members of polycyclic aromatic hydrocarbons, compound anthracene (Ant) and phenanthrene (Phe) as isomers are widely used in organic optical materials and electronic materials. But their photochemical and physical properties are very different. In this work, the room temperature phosphorescence (RTP) properties of PVA-B-Ant and PVA-B-Phe are discussed carefully which are prepared by B-O click reaction through polyvinyl alcohol (PVA) with 9-anthraceneboronic acid (B-Ant) and 9-phenanthrenylboronic acid (B-Phe), respectively. PVA-B-Phe 1 % film exhibits excellent fluorescence (FL) emission at 374 nm and RTP emission at 523 nm with green afterglow and around 1.9 s phosphorescence lifetime. However, PVA-B-Ant 1 % film only shows strong blue FL emission at 414 nm, and the emission intensity decreases seriously with the extension of irradiation time. Experimental and theoretical calculations results suggest that the photodimer of Ant which is formed in PVA matrix under the UV light irradiation would be competitive with the process of RTP emission. This work demonstrates that the RTP properties of organic molecules might be probably affected by the photostability of the organic phosphor under UV irradiation.

Ultralong room temperature phosphorescence with multicolor afterglow achieved in a harsh polymeric viscous flow state

Polymer-based ultralong room temperature phosphorescence (RTP) is more attractive than that of organic small molecules. However, the intrinsic contradictions between the motion of the chain and the stability of phosphors' triplet excitons make achieving ultralong lifetime in polymeric systems a big challenge. Herein, we have achieved ultralong RTP emission in a polymeric viscous flow state with free chain motion through a facile B-O click reaction among boric acid, polyvinyl alcohol, and hydroxyl silicone oil. The yielded RTP putties (RTPPs) exhibited long lifetimes under ambient conditions (up to 2.39 s), surpassing those of all reported elastic RTP polymers and most glassy RTP polymers. Furthermore, multi-color afterglow can be achieved in RTPPs using the triplet-to-singlet Förster resonance energy transfer strategy. Impressively, utilizing viscous liquid features combined with RTP performance, RTPPs can be easily applied in complex models, handiwork, and anti-counterfeiting. Therefore, this progress, achieving a long phosphorescence lifetime in a viscous flow state, greatly expands the application scope of polymeric RTP materials and further compels a conceptual advance of polymeric RTP.

Scalable Multistep Imprinting of Multiplexed Optical Anti-counterfeiting Patterns with Hierarchical Structures

Multiplexed optical techniques with multichannel patterns provide powerful strategies for high-capacity anti-counterfeiting. However, it is still a big challenge to meet the demands of achieving high encryption levels, excellent readability, and simple preparation simultaneously. Herein, we use a multistep imprinting technique, leveraging surface work-hardening to massively produce multiplexed encrypted patterns with hierarchical structures. These patterns with coupled nano- and microstructures can be instantaneously decoded into different pieces of information at different view angles under white light illumination. By incorporating perpendicular nano- and microgratings, we achieve four-channel encoded patterns, enhancing anti-counterfeiting capacity. This versatile method works on various metal/polymer materials, offering high-density information storage, direct visibility, broad material compatibility, and low-cost mass production. Our high-performance anti-counterfeiting patterns show significant potential in real-world applications.

Naphthalimide-Modified Clusters for Red-Emitting Devices with High Color Purity

Conventional fluorescent materials frequently exhibit narrow-band emissions with a small full width at half-maximum (fwhm) due to localized-state characteristics, but electroluminescence is less efficient owing to the utilization of only singlet excitons. In this work, taking advantage of naphthalimide (NAI)-acetylide derivatives with a rigid planar structure and localized transition characteristics, we elaborately designed two mononuclear Pt(II) complexes with weak double emissions of fluorescence and phosphorescence. Taking them as synthetic precursors, we prepared three PtAu2 heteronuclear clusters and successfully attained highly efficient narrow-band red phosphorescence with the fwhm below 30 nm. Both theoretical and experimental results suggest that the phosphorescence of PtAu2 clusters mainly originates from the naphthalimide-localized 3IL (intraligand) triplet state. Solution-processed organic light-emitting diodes (OLEDs) achieved highly efficient narrow-band red electroluminescence with an external quantum efficiency (EQE) of 16.7%. The CIE coordinates of the electroluminescence (0.69, 0.31) closely match the standard red emission for ultrahigh-definition display.

Targeting Compact and Ordered Emitters by Supramolecular Dynamic Interactions for High-performance Organic Ambient Phosphorescence

Purely organic room-temperature phosphorescence (RTP) materials have received intense attention due to their fascinating optical properties and advanced optoelectronic applications. The promotion of intersystem crossing (ISC) and minimalization of nonradiative dissipation under ambient conditions are key prerequisites for realizing high-performance organic RTP; However, the ISC process is generally inefficient for organic fluorogens and the populated triplet excitons are always too susceptible to be well stabilized by conventional means. Particularly, organizing organic fluorophores into compact and ordered entities by supramolecular dynamic interactions has proven to be a newly-emerged strategy to boost the ISC process greatly and suppress the non-radiative relaxations immensely, facilitating the population and stabilization of triplet excitons to access high-performance organic RTP. Consequently, well-defined organic emitters enable robust RTP emission even in the solution state, thus greatly extending the applications. Here, this review is focused on a timely and brief introduction to recent progress in tailoring ordered high-performance RTP emitters by supramolecular dynamic interactions. Their typical preparation strategies, optoelectronic properties, and applications are thoroughly summarized. In the summary section, key challenges and perspectives of this field are highlighted to suggest potential directions for future study.

Polymer-Based Room-Temperature Phosphorescence Materials Exhibiting Emission Lifetimes up to 4.6 s Under Ambient Conditions

The long-emission-lifetime nature of room-temperature phosphorescence (RTP) materials lays the foundation of their applications in diverse areas. Despite the advantage of mechanical property, processability and solvent dispersity, the emission lifetimes of polymer-based room-temperature phosphorescence materials remain not particularly long because of the labile nature of organic triplet excited states under ambient conditions. Specifically, ambient phosphorescence lifetime (τP) longer than 2 s and even 4 s have rarely been reported in polymer systems. Here, luminescent compounds with small phosphorescence rate on the order of approximately 10-1 s-1 are designed, ethylene-vinyl alcohol copolymer (EVOH) as polymer matrix and antioxidant 1010 to protect organic triplets are employed, and ultralong phosphorescence lifetime up to 4.6 s under ambient conditions by short-term and low-power excitation are achieved. The resultant materials exhibit high afterglow brightness, long afterglow duration, excellent processability into large area thin films, high transparency and thermal stability, which display promising anticounterfeiting and data encryption functions.

3D Printed Room Temperature Phosphorescence Materials Enabled by Edible Natural Konjac Glucomannan

Shaping room temperature phosphorescence (RTP) materials into 3D bodies is important for stereoscopic optoelectronic displays but remains challenging due to their poor processability and mechanical properties. Here, konjac glucomannan (KGM) is employed to anchor arylboronic acids with various π conjugations via a facile B─O covalent reaction to afford printable inks, using which full-color high-fidelity 3D RTP objects with high mechanical strength can be obtained via direct ink writing-based 3D printing and freeze-drying. The doubly rigid structure supplied by the synergy of hydrogen bonding and B─O covalent bonding can protect the triplet excitons; thus, the prepared 3D RTP object shows a striking lifetime of 2.14 s. The printed counterparts are successfully used for 3D anti-counterfeiting and can be recycled and reprinted nondestructively by dissolving in water. This success expands the scope of printable 3D luminescent materials, providing an eco-friendly platform for the additive manufacturing of sophisticated 3D RTP architectures.

Stretchable phosphorescent polymers by multiphase engineering

Stretchable phosphorescence materials potentially enable applications in diverse advanced fields in wearable electronics. However, achieving room-temperature phosphorescence materials simultaneously featuring long-lived emission and good stretchability is challenging because it is hard to balance the rigidity and flexibility in the same polymer. Here we present a multiphase engineering for obtaining stretchable phosphorescent materials by combining stiffness and softness simultaneously in well-designed block copolymers. Due to the microphase separation, copolymers demonstrate an intrinsic stretchability of 712%, maintaining an ultralong phosphorescence lifetime of up to 981.11 ms. This multiphase engineering is generally applicable to a series of binary and ternary initiator systems with color-tunable phosphorescence in the visible range. Moreover, these copolymers enable multi-level volumetric data encryption and stretchable afterglow display. This work provides a fundamental understanding of the nanostructures and material properties for designing stretchable materials and extends the potential of phosphorescence polymers.

Finely manipulating room temperature phosphorescence by dynamic lanthanide coordination toward multi-level information security

Room temperature phosphorescence materials have garnered significant attention due to their unique optical properties and promising applications. However, it remains a great challenge to finely manipulate phosphorescent properties to achieve desirable phosphorescent performance on demand. Here, we show a feasible strategy to finely manipulate organic phosphorescent performance by introducing dynamic lanthanide coordination. The organic phosphors of terpyridine phenylboronic acids possessing excellent coordination ability are covalently embedded into a polyvinyl alcohol matrix, leading to ultralong organic room temperature phosphorescence with a lifetime of up to 0.629 s. Notably, such phosphorescent performance, including intensity and lifetime, can be well controlled by varying the lanthanide dopant. Relying on the excellent modulable performance of these lanthanide-manipulated phosphorescence films, multi-level information encryption including attacker-misleading and spatial-time-resolved applications is successfully demonstrated with greatly improved security level. This work opens an avenue for finely manipulating phosphorescent properties to meet versatile uses in optical applications.

Delayed room temperature phosphorescence enabled by phosphines

Organic ultralong room-temperature phosphorescence (RTP) usually emerges instantly and immediately decays after excitation removal. Here we report a new delayed RTP that is postponed by dozens of milliseconds after excitation removal and decays in two steps including an initial increase in intensity followed by subsequent decrease in intensity. The delayed RTP is achieved through introduction of phosphines into carbazole emitters. In contrast to the rapid energy transfer from single-molecular triplet states (T1) to stabilized triplet states (Tn*) of instant RTP systems, phosphine groups insert their intermediate states (TM) between carbazole-originated T1 and Tn* of carbazole-phosphine hybrids. In addition to markedly increasing emission lifetimes by ten folds, since TM → Tn* transition require >30 milliseconds, RTP is thereby postponed by dozens of milliseconds. The emission character of carbazole-phosphine hybrids can be used to reveal information through combining instant and delayed RTP, realizing multi-level time resolution for advanced information, biological and optoelectronic applications.

Unique Visualization Growth Process of Long-Lived Room Temperature Phosphorescence in Polymer System

Recently, embedding organic phosphors into the polyvinyl alcohol (PVA) matrix has emerged as a convenient strategy to obtain efficient long-lived room temperature phosphorescence (RTP) via forming strong intermolecular hydrogen bonds with organic phosphors to minimize nonradiative relaxations. Regrettably, it is discovered that PVA is unable to trigger RTP emission when a novel functional phosphor THBE containing six extended biphenyl formaldehyde arms is doped into PVA matrix. Surprisingly, the excellent long-lived RTP emission can be easily obtained by doping THBE into PVA analogs, poly(vinyl alcohol-co-ethylene) (PVA-co-PE). The unique visualization growth process (i.e., white streak generation) of long-lived RTP is observed by UV light-driven aggregation of functional molecules THBE in PVA-co-PE matrix. The phosphorescent intensity of the luminescent film is enhanced by 55 times, from 729 to 40,785 a.u., and its phosphorescence lifetime is increased by 38 times, from 37.08 to 1415.41 ms. Due to the dynamically reversible RTP performance, as well as the permeability, flexibility, and wrinkle-free properties of the luminescent film, it can be utilized to create cutting-edge information storage devices.

Visible-light-excited robust room-temperature phosphorescence of dimeric single-component luminophores in the amorphous state

Organic room temperature phosphorescence (RTP) has significant potential in various applications of information storage, anti-counterfeiting, and bio-imaging. However, achieving robust organic RTP emission of the single-component system is challenging to overcome the restriction of the crystalline state or other rigid environments with cautious treatment. Herein, we report a single-component system with robust persistent RTP emission in various aggregated forms, such as crystal, fine powder, and even amorphous states. Our experimental data reveal that the vigorous RTP emissions rely on their tight dimers based on strong and large-overlap π-π interactions between polycyclic aromatic hydrocarbon (PAH) groups. The dimer structure can offer not only excitons in low energy levels for visible-light excited red long-lived RTP but also suppression of the nonradiative decays even in an amorphous state for good resistance of RTP to heat (up to 70 °C) or water. Furthermore, we demonstrate the water-dispersible nanoparticle with persistent RTP over 600 nm and a lifetime of 0.22 s for visible-light excited cellular and in-vivo imaging, prepared through the common microemulsion approach without overcaution for nanocrystal formation.

Multi-Functional Integration of Phosphor, Initiator, and Crosslinker for the Photo-Polymerization of Flexible Phosphorescent Polymer Gels

A general approach to constructing room temperature phosphorescence (RTP) materials involves the incorporation of a phosphorescent emitter into a rigid host or polymers with high glass transition temperature. However, these materials often suffer from poor processability and suboptimal mechanical properties, limiting their practical applications. In this work, we developed benzothiadiazole-based dialkene (BTD-HEA), a multifunctional phosphorescent emitter with a remarkable yield of intersystem crossing (ΦISC, 99.83 %). Its high triplet exciton generation ability and dialkene structure enable BTD-HEA to act as a photoinitiator and crosslinker, efficiently initiating the polymerization of various monomers within 120 seconds. A range of flexible phosphorescence gels, including hydrogels, organogels, ionogels, and aerogels were fabricated, which exhibit outstanding stretchability and recoverability. Furthermore, the unique fluorescent-phosphorescent colorimetric properties of the gels provide a more sensitive method for the visual determination of the polymerization process. Notably, the phosphorescent emission intensity of the hydrogel can be increased by the formation of ice, allowing for the precise detection of hydrogel freezing. The versatility of this emitter paves the way for fabricating various flexible phosphorescence gels with diverse morphologies using microfluidics, film-shearing, roll coating process, and two/three-dimensional printing, showcasing its potential applications in the fields of bioimaging and bioengineering.

Stable and ultralong room-temperature phosphorescent copolymers with excellent adhesion, resistance, and toughness

Developing stable room-temperature phosphorescence (RTP) emission without being affected by moisture and mechanical force remains a great challenge for purely organic systems, due to their triplet states sensitive to the infinitesimal motion of phosphors and the oxygen quencher. We report a kind of highly robust phosphorescent systems, by doping a rigid phosphor into a copolymer (polyvinyl butyral resin) matrix with a balance of mutually exclusive features, including a rigidly hydrophilic hydrogen bond network and elastically hydrophobic constituent. Impressively, these RTP polymeric films have superior adhesive ability on various surfaces and showed reversible photoactivated RTP with lifetimes up to 5.82 seconds, which can be used as in situ modulated anticounterfeit labels. They can maintain a bright afterglow for over 25.0 seconds under various practical conditions, such as storage in refrigerators, soaking in natural water for a month, or even being subjected to strong collisions and impacts. These findings provide deep insights for developing stable ultralong RTP materials with desirable comprehensive performance.

Immobilization of Adenosine Derivatives onto Cellulose Nanocrystals via Click Chemistry for Biocatalysis Applications

Adenosine triphosphate (ATP) is a central molecule of organisms and is involved in many biological processes. It is also widely used in biocatalytic processes, especially as a substrate and precursor of many cofactors─such as nicotinamide adenine dinucleotide phosphate (NADP(H)), coenzyme A (CoA), and S-adenosylmethionine (SAM). Despite its great scientific interest and pivotal role, its use in industrial processes is impeded by its prohibitory cost. To overcome this limitation, we developed a greener synthesis of adenosine derivatives and efficiently selectively grafted them onto organic nanoparticles. In this study, cellulose nanocrystals were used as a model combined with click chemistry via a copper-catalyzed azide/alkyne cycloaddition reaction (CuAAC). The grafted adenosine triphosphate derivative fully retains its biocatalytic capability, enabling heterobiocatalysis for modern biochemical processes.

Direct Population of Triplet States for Efficient Organic Afterglow through the Intra/Intermolecular Heavy-Atom Effect

Organic afterglow is a fascinating phenomenon with exceptional applications. However, it encounters challenges such as low intensity and efficiency, and typically requires UV-light excitation and facile intersystem crossing (ISC) due to its spin-forbidden nature. Here, we develop a novel strategy that bypasses the conventional ISC pathway by promoting singlet-triplet transition through the synergistic effects of the intra/intermolecular heavy-atom effect in aromatic crystals, enabling the direct population of triplet excited states from the ground state. The resulting materials exhibit a bright organic afterglow with a remarkably enhanced quantum efficiency of up to 5.81%, and a significantly increased organic afterglow lifetime of up to 157 microseconds under visible light. Moreover, given the high-efficiency visible-light excitable organic afterglow emission, the potential application is demonstrated in lifetime-resolved, color-encoded, and excitation wavelength-dependent pattern encryption. This work demonstrates the importance of the direct population method in enhancing the organic afterglow performance and red-shifting the excitation wavelength, and provides crucial insights for advancing organic optoelectronic technologies that involve triplet states.

Molecularly Engineered Room-Temperature Phosphorescence for Biomedical Application: From the Visible toward Second Near-Infrared Window

Phosphorescence, characterized by luminescent lifetimes significantly longer than that of biological autofluorescence under ambient environment, is of great value for biomedical applications. Academic evidence of fluorescence imaging indicates that virtually all imaging metrics (sensitivity, resolution, and penetration depths) are improved when progressing into longer wavelength regions, especially the recently reported second near-infrared (NIR-II, 1000-1700 nm) window. Although the emission wavelength of probes does matter, it is not clear whether the guideline of "the longer the wavelength, the better the imaging effect" is still suitable for developing phosphorescent probes. For tissue-specific bioimaging, long-lived probes, even if they emit visible phosphorescence, enable accurate visualization of large deep tissues. For studies dealing with bioimaging of tiny biological architectures or dynamic physiopathological activities, the prerequisite is rigorous planning of long-wavelength phosphorescence, being aware of the cooperative contribution of long wavelengths and long lifetimes for improving the spatiotemporal resolution, penetration depth, and sensitivity of bioimaging. In this Review, emerging molecular engineering methods of room-temperature phosphorescence are discussed through the lens of photophysical mechanisms. We highlight the roles of phosphorescence with emission from visible to NIR-II windows toward bioapplications. To appreciate such advances, challenges and prospects in rapidly growing studies of room-temperature phosphorescence are described.

Microwave-Responsive Flexible Room-Temperature Phosphorescence Materials Based on Poly(vinylidene fluoride) Polymer

The development of flexible, room-temperature phosphorescence (RTP) materials remains challenging owing to the quenching of their unstable triplet excitons via molecular motion. Therefore, a polymer matrix with Tg higher than room temperature is required to prevent polymer segment movement. In this study, a RTP material was developed by incorporating a 4-biphenylboronic acid (BPBA) phosphor into a poly(vinylidene fluoride) (PVDF) matrix (Tg =-27.1 °C), which exhibits a remarkable UV-light-dependent oxygen consumption phosphorescence with a lifetime of 1275.7 ms. The adjustable RTP performance is influenced by the crystallinity and polymorph (α, β, and γ phases) fraction of PVDF, therefore, the low Tg of the PVDF matrix enables the polymeric segmental motion upon microwave irradiation. Consequently, a reduction in the crystallinity and an increase in the α phase fraction in PVDF film induces RTP after 2.45 GHz microwave irradiation. These findings open up new avenues for constructing crystalline and phase-dependent RTP materials while demonstrating a promising approach toward microwave detection.

Phosphorescence resonance energy transfer from purely organic supramolecular assembly

Phosphorescence energy transfer systems have been applied in encryption, biomedical imaging and chemical sensing. These systems exhibit ultra-large Stokes shifts, high quantum yields and are colour-tuneable with long-wavelength afterglow fluorescence (particularly in the near-infrared) under ambient conditions. This review discusses triplet-to-singlet PRET or triplet-to-singlet-to-singlet cascaded PRET systems based on macrocyclic or assembly-confined purely organic phosphorescence introducing the critical toles of supramolecular noncovalent interactions in the process. These interactions promote intersystem crossing, restricting the motion of phosphors, minimizing non-radiative decay and organizing donor-acceptor pairs in close proximity. We discuss the applications of these systems and focus on the challenges ahead in facilitating their further development.

Macromolecular Engineered Multifunctional Room-Temperature Phosphorescent Polymers through Reversible Deactivation Radical Polymerization

Despite the intensive research in room-temperature phosphorescent (RTP) polymers, the synthesis of RTP polymers with well-defined macromolecular structures and multiple functions remains a challenge. Herein, reversible deactivation radical polymerization was demonstrated to offer a gradient copolymer (GCP) architecture with controlled heterogeneities, which combines hard segment and flexible segment. The GCPs would self-assemble into a multiphase nanostructure, featuring tunable stretchability, excellent RTP performance, and intrinsic healability without compromising light emission under stretching. The mechanical performance is tunable on demand with elongation at break ranging from 5.0% to 221.7% and Young's modulus ranging from 0.5 to 225.0 MPa.

Facile Preparation of Full-Color Tunable Room Temperature Phosphorescence Cellulose via Click Chemistry

Sustainable long-lived room temperature phosphorescence (RTP) materials with color-tunable afterglows are attractive but rarely reported. Here, cellulose is reconstructed by directed redox to afford ample active hydroxyl groups and water-solubility; arylboronic acids with various π conjugations can be facilely anchored to reconstructed cellulose via click chemistry within 1 min in pure water, resulting in full-color tunable RTP cellulose. The rigid environment provided by the B─O covalent bonds and hydrogen bonds can stabilize the triplet excitons, thus the target cellulose displays outstanding RTP performances with the lifetime of 2.67 s, phosphorescence quantum yield of 9.37%, and absolute afterglow luminance of 348 mcd m-2 . Furthermore, due to the formation of various emissive species, the smart RTP cellulose shows excitation- and time-dependent afterglows. Taking advantages of sustainability, ultralong lifetime, and full-color tunable afterglows, et al, the environmentally friendly RTP cellulose is successfully used for nontoxic afterglow inks, delay lighting, and afterglow display.

Recent advances in the design of afterglow materials: mechanisms, structural regulation strategies and applications

Afterglow materials are attracting widespread attention owing to their distinctive and long-lived optical emission properties which create exciting opportunities in various fields. Recent research has led to the discovery of many new afterglow materials featuring high photoluminescence quantum yields (PLQY) and lifetimes of up to several hours under ambient conditions. Afterglow materials are typically categorized according to their luminescence mechanism, such as long-persistent luminescence (LPL), room temperature phosphorescence (RTP), or thermally activated delayed fluorescence (TADF). Through rational design and novel synthetic strategies to modulate spin-orbit coupling (SOC) and populate triplet exciton states (T1), luminophores with long lifetimes and bright afterglow characteristics can be realized. Initial research towards afterglow materials focused mainly on pure inorganic materials, many of which possessed inherent disadvantages such as metal toxicity or low energy emissions. In recent years, organic-inorganic hybrid afterglow materials (OIHAMs) have been developed with high PLQY and long lifetimes. These hybrid materials exploit the tunable structure and easy processing of organic molecules, as well as enhanced SOC and intersystem crossing (ISC) processes involving heavy atom dopants, to achieve excellent afterglow performance. In this review, we begin by briefly discussing the structure and composition of inorganic and organic-inorganic hybrid afterglow materials, including strategies for regulating their lifetime, PLQY and luminescence wavelength. The specific advantages of organic-inorganic hybrid afterglow materials, including low manufacturing costs, diverse molecular/electronic structures, tunable structures and optical properties, and compatibility with a variety of substrates, are emphasized. Subsequently, we discuss in detail the fundamental mechanisms used by afterglow materials, their classification, design principles, and end applications (including sensing, anticounterfeiting, and photoelectric devices, among others). Finally, existing challenges and promising future directions are discussed, laying a platform for the design of afterglow materials for specific applications.

Stepwise taming of triplet excitons via multiple confinements in intrinsic polymers for long-lived room-temperature phosphorescence

Polymeric materials exhibiting room temperature phosphorescence (RTP) show a promising application potential. However, the conventional ways of preparing such materials are mainly focused on doping, which may suffer from phase separation, poor compatibility, and lack of effective methods to promote intersystem crossing and suppress the nonradiative deactivation rates. Herein, we present an intrinsically polymeric RTP system producing long-lived phosphorescence, high quantum yields and multiple colors by stepwise structural confinement to tame triplet excitons. In this strategy, the performance of the materials is improved in two aspects simultaneously: the phosphorescence lifetime of one polymer (9VA-B) increased more than 4 orders of magnitude, and the maximum phosphorescence quantum yield reached 16.04% in halogen-free polymers. Moreover, crack detection is realized by penetrating steam through the materials exposed to humid surroundings as a special quenching effect, and the information storage is carried out by employing the Morse code and the variations in lifetimes. This study provides a different strategy for constructing intrinsically polymeric RTP materials toward targeted applications.

Large-Scale Preparation for Multicolor Stimulus-Responsive Room-Temperature Phosphorescence Paper via Cellulose Heterogeneous Reaction

The large-scale preparation of sustainable room-temperature phosphorescence (RTP) materials, particularly those with stimulus-response properties, is attractive but remains challenging. This study develops a facile heterogeneous B─O covalent bonding strategy to anchor arylboronic acid chromophores to cellulose chains using pure water as a solvent, resulting in multicolor RTP cellulose. The rigid environment provided by the B─O covalent bonds and hydrogen bonds promotes the triplet population and suppresses quenching, leading to an excellent lifetime of 1.42 s for the target RTP cellulose. By increasing the degree of chromophore conjugation, the afterglow colors can be tuned from blue to green and then to red. Motivated by this finding, a papermaking production line is built to convert paper pulp reacted with an arylboronic acid additive into multicolor RTP paper on a large scale. Furthermore, the RTP paper is sensitive to water because of the destruction of hydrogen bonds, and the stimuli-response can be repeated in response to water/heat stimuli. The RTP paper can be folded into 3D afterglow origami handicrafts and anti-counterfeiting packing boxes or used for stimulus-responsive information encryption. This success paves the way for the development of large-scale, eco-friendly, and practical stimuli-responsive RTP materials.

Room-temperature phosphorescent materials derived from natural resources

Room-temperature phosphorescent (RTP) materials have enormous potential in many different areas. Additionally, the conversion of natural resources to RTP materials has attracted considerable attention. Owing to their inherent luminescent properties, natural materials can be efficiently converted into sustainable RTP materials. However, to date, only a few reviews have focused on this area of endeavour. Motivated by this lack of coverage, in this Review, we address this shortcoming and introduce the types of natural resource available for the preparation of RTP materials. We mainly focus on the inherent advantages of natural resources for RTP materials, strategies for activating and enhancing the RTP properties of the natural resources as well as the potential applications of these RTP materials. In addition, we discuss future challenges and opportunities in this area of research.

Conventional Non-Fluorescent Polymers: Unconventional Security Inks for Data Storage and Multidimensional Photonic Cryptography

Traditional security inks relying on fluorescent/phosphorescent molecules are facing increasing risks of forgery or tampering due to their simple readout scheme (i.e., UV-light irradiation) and the advancement of counterfeiting technologies. In this work, a multidimensional data-encryption method based on non-fluorescent polymers via a "lock-key" mechanism is developed. The non-fluorescent invisible polymer inks serve as the "lock" for data-encryption, while the anti-rigidochromic fluorophores that can distinctively light up the polymer inks with programed emissions are "keys" for decryption. The emission of decrypted data is prescribed by polymer chemical structure, molecular weight, topology, copolymer sequence, and phase structure, and shows distinct intensity, wavelength, and chirality compared with the intrinsic emission of fluorophores. Therefore, the data is triply encrypted and naturally gains a high-security level, e.g., only one out of 20 000 keys can access the only correct readout from 40 000 000 possible outputs in a three-polymers-based data-encryption matrix. Note that fluorophores lacking anti-rigidochrimism cannot selectively light up the inks and fail in data-decryption. Further, the diverse topologies, less well-defined structures, and random-coiled shapes of polymers make it impossible for them to be imitated. This work offers a new design for security inks and boosts data security levels beyond the reach of conventional fluorescent inks.

Design of mechanical-robust phosphorescence materials through covalent click reaction

It remains a great challenge to engineer materials with strong and stable interactions for the simultaneously mechanical-robust and room temperature phosphorescence-efficient materials. In this work, we demonstrate a covalent cross-linking strategy to engineer mechanical-robust room temperature phosphorescence materials through the B-O click reaction between chromophores, polyvinyl alcohol matrix and inorganic layered double hydroxide nanosheets. Through the covalent cross-linkage between the organic polyvinyl alcohol and inorganic layered double hydroxide, a polymeric composite with ultralong lifetime up to 1.45 s is acquired based on the inhibited non-radiative transition of chromophores. Simultaneously, decent mechanical strength of 97.9 MPa can be realized for the composite materials due to the dissipated loading stress through the covalent-bond-accommodated interfacial interaction. These cross-linked composites also exhibit flexibility, processability, scalability and phosphorescence responses towards the mechanical deformation. It is anticipated that the proposed covalent click reaction could provide a platform for the design and modulation of composites with multi-functionality and long-term durability.

Activating Molecular Room-Temperature Phosphorescence by Manipulating Excited-State Energy Levels in Poly(vinyl alcohol) Matrix

Poly(vinyl alcohol) (PVA) has been found as a wonderful matrix for chromophores to boost their room-temperature phosphorescence (RTP) character by forming abundant hydrogen bonding. Despite the well-utilized protective effect, the constructive role in accelerating the intersystem crossing is less investigated. Here, we focus on its role in manipulating the excited-state energy level to facilitate multiple intersystem crossing channels. Six benzoyl carbazole derivatives do not emit RTP in their solutions, powders, or crystals but exhibit significantly persistent RTP signals when embedded into the PVA matrix. Charge-transfer excited states were trapped by cofacial stacking in crystal, which blocks the intersystem crossing channels. In the PVA matrix, the allowed broad distribution of charge-transfer states covers the locally excited states, offering multiple intersystem crossing pathways via spin-vibronic orbit coupling. Consequently, efficient and persistent heavy-atom-free phosphors have been developed with the highest quantum yields of 7.7% and the longest lifetime of 2.3 s.

Rational molecular and doping strategies to obtain organic polymers with ultralong RTP

Organic-doped polymers and room-temperature phosphorescence (RTP) mechanisms have been widely reported. However, RTP lifetimes >3 s are rare and RTP-enhancing strategies are incompletely understood. Herein, we demonstrate a rational molecular doping strategy to obtain ultralong-lived, yet bright RTP polymers. The n-π* transitions of boron- and nitrogen-containing heterocyclic compounds can promote a triplet-state population, and the grafting of boronic acid onto polyvinyl alcohol can inhibit molecular thermal deactivation. However, excellent RTP properties were achieved by grafting 1-0.1% (N-phenylcarbazol-2-yl)-boronic acid rather than (2-/3-/4-(carbazol-9-yl)phenyl)boronic acids to afford record-breaking ultralong RTP lifetimes up to 3.517-4.444 s. These results showed that regulation of the interacting position between the dopant and matrix molecules to directly confine the triplet chromophore could more effectively stabilize triplet excitons, disclosing a rational molecular-doping strategy for achieving polymers with ultralong RTP. Based on the energy-donor function of blue RTP, an ultralong red fluorescent afterglow was demonstrated by co-doping with an organic dye.

Neglected acidity pitfall: boric acid-anchoring hole-selective contact for perovskite solar cells

The spontaneous formation of self-assembly monolayer (SAM) on various substrates represents an effective strategy for interfacial engineering of optoelectronic devices. Hole-selective SAM is becoming popular among high-performance inverted perovskite solar cells (PSCs), but the presence of strong acidic anchors (such as -PO3H2) in state-of-the-art SAM is detrimental to device stability. Herein, we report for the first time that acidity-weakened boric acid can function as an alternative anchor to construct efficient SAM-based hole-selective contact (HSC) for PSCs. Theoretical calculations reveal that boric acid spontaneously chemisorbs onto indium tin oxide (ITO) surface with oxygen vacancies facilitating the adsorption progress. Spectroscopy and electrical measurements indicate that boric acid anchor significantly mitigates ITO corrosion. The excess boric acid containing molecules improves perovskite deposition and results in a coherent and well-passivated bottom interface, which boosts the fill factor (FF) performance for a variety of perovskite compositions. The optimal boric acid-anchoring HSC (MTPA-BA) can achieve power conversion efficiency close to 23% with a high FF of 85.2%. More importantly, the devices show improved stability: 90% of their initial efficiency is retained after 2400 h of storage (ISOS-D-1) or 400 h of operation (ISOS-L-1), which are 5-fold higher than those of phosphonic acid SAM-based devices. Acidity-weakened boric acid SAMs, which are friendly to ITO, exhibits well the great potential to improve the stability of the interface as well as the device.

Characterization Techniques of Polymer Aging: From Beginning to End

Polymers have been widely applied in various fields in the daily routines and the manufacturing. Despite the awareness of the aggressive and inevitable aging for the polymers, it still remains a challenge to choose an appropriate characterization strategy for evaluating the aging behaviors. The difficulties lie in the fact that the polymer features from the different aging stages require different characterization methods. In this review, we present an overview of the characterization strategies preferable for the initial, accelerated, and late stages during polymer aging. The optimum strategies have been discussed to characterize the generation of radicals, variation of functional groups, substantial chain scission, formation of low-molecular products, and deterioration in the polymers' macro-performances. In view of the advantages and the limitations of these characterization techniques, their utilization in a strategic approach is considered. In addition, we highlight the structure-property relationship for the aged polymers and provide available guidance for lifetime prediction. This review could allow the readers to be knowledgeable of the features for the polymers in the different aging stages and provide access to choose the optimum characterization techniques. We believe that this review will attract the communities dedicated to materials science and chemistry.

Recent advances in room temperature phosphorescence materials: design strategies, internal mechanisms and intelligent optical applications

Room temperature phosphorescence (RTP) materials comprising organic-inorganic hybrid, pure organic, and polymer RTP materials have been a research focus due to their tunable molecular structures, long emission lifetimes and extensive optical applications. Many design methods including halogen bonding interactions, heavy atom effect, metal-organic frameworks, polymerization, host-guest doping, and H-aggregation have been developed by RTP researchers. Narrowing the energy gap between the S₁ and lowest T_n states, enhancing the intersystem crossing (ISC) rate, increasing the spin-orbit coupling (SOC) value and stabilizing triplet emission states are the core factors to promoting RTP performance. In this review, lots of cases of organic-inorganic hybrid, pure organic, and polymer RTP materials with advanced design strategies, excellent RTP properties and intelligent applications have been classified and sorted. Their molecule structural designability and stimulus responsiveness endow them with RTP adjustability, which makes them excellent phosphors for modern optical applications. This review provides a systematic case elaboration of typical RTP systems in recent years and identifies the future challenges to improving RTP performance and finding novel applications.

Polymerization-Enhanced Photophysical Performances of AIEgens for Chemo/Bio-Sensing and Therapy

AIE polymers have been extensively researched in the fields of OLEDs, sensing, and cancer treatment since its first report in 2003, which have achieved numerous breakthroughs during the years. In comparison with small molecules, it can simultaneously combine the unique advantages of AIE materials and the polymer itself, to further enhance their corresponding photophysical performances. In this review, we enumerate and discuss the common construction strategies of AIE-active polymers and summarize the progress of research on polymerization enhancing luminescence, photosensitization, and room-temperature phosphorescence (RTP) with their related applications in chemo/bio-sensing and therapy. To conclude, we also discuss current challenges and prospects of the field for future development.

H-Bonding Room Temperature Phosphorescence Materials via Facile Preparation for Water-Stimulated Photoluminescent Ink

Pure organic room-temperature phosphorescence (RTP) materials built upon noncovalent interactions have attracted much attention because of their high efficiency, long lifetime, and stimulus-responsive behavior. However, there are limited reports of noncovalent RTP materials because of the lack of specific design principles and clear mechanisms. Here, we report on a noncovalent material prepared via facile grinding that can emit fluorescence and RTP emission differing from their components’ photoluminescent behavior. Exciplex can be formed during the preparation process to act as the minimum emission unit. We found that H-bonds in the RTP system provide restriction to nonradiative transition but also enhance energy transformation and energy level degeneracy in the system. Moreover, water-stimulated photoluminescent ink is produced from the materials to achieve double-encryption application with good resolution.

An all-round AI-Chemist with a scientific mind

The realization of automated chemical experiments by robots unveiled the prelude to an artificial intelligence (AI) laboratory. Several AI-based systems or robots with specific chemical skills have been demonstrated, but conducting all-round scientific research remains challenging. Here, we present an all-round AI-Chemist equipped with scientific data intelligence that is capable of performing basic tasks generally required in chemical research. Based on a service platform, the AI-Chemist is able to automatically read the literatures from a cloud database and propose experimental plans accordingly. It can control a mobile robot in-house or online to automatically execute the complete experimental process on 14 workstations, including synthesis, characterization and performance tests. The experimental data can be simultaneously analysed by the computational brain of the AI-Chemist through machine learning and Bayesian optimization, allowing a new hypothesis for the next iteration to be proposed. The competence of the AI-Chemist has been scrutinized by three different chemical tasks. In the future, the more advanced all-round AI-Chemists equipped with scientific data intelligence may cause changes to the landscape of the chemical laboratory.