Holistic energy landscape management in 2D/3D heterojunction via molecular engineering for efficient perovskite solar cells

Regulating Charge Transport Dynamics at the Buried Interface and Bulk of Perovskites by Tailored-phase Two-dimensional Crystal Seed Layer

Targeting the trap-assisted non-radiative recombination losses and photochemical degradation occurring at the interface and bulk of perovskite, especially the overlooked buried bottom interface, a strategy of tailored-phase two-dimensional (TP-2D) crystal seed layer has been developed to improve the charge transport dynamics at the buried interface and bulk of perovskite films. Using this approach, TP-2D layer constructed by TP-2D crystal seeds at the buried interface can induce the formation of homogeneous interface electric field, which effectively suppress the accumulation of charge carriers at the buried interface. Additionally, the presence of TP-2D crystal seed has a positive effect on the crystallization process of the upper perovskite film, leading to optimized crystal quality and thus promoted charge transport inside bulk perovskites. Ultimately, the best performing PSCs based on TP-2D layer deliver a power conversion efficiency of 24.58 %. The devices exhibit an improved photostability with 88.4 % of their initial PCEs being retained after aging under continuous 0.8-sun illumination for 2000 h in air. Our findings reveal how to regulate the charge transport dynamics of perovskite bulk and interface by introducing homogeneous components.

Interlayer Carrier Dynamics in Two-Dimensional Perovskites Determined by the Length of Conjugated Organic Cations

Unlocking the restricted interlayer carrier transfer in a two-dimensional perovskite is a crucial means to achieve the harmonization of efficiency and stability in perovskite solar cells. In this work, the effects of conjugated organic molecules on the interlayer carrier dynamics of 2D perovskites were investigated through nonadiabatic molecular dynamics simulations. We found that elongated conjugated organic cations contributed significantly to the accelerated interlayer carrier dynamics, originating from lowered transport barrier and boosted π-p coupling between organic and inorganic layers. Utilizing conjugated molecules of moderate length as spacer cations can yield both superior efficiency and exceptional stability simultaneously. However, conjugated chains that are too long lead to structural instability and stronger carrier recombination. The potential of conjugated chain-like molecules as spacer cations in 2D perovskites has been demonstrated in our work, offering valuable insights for the development of high-performance perovskite solar cells.

Interfacial Rivet to Fill Structural Defects: A Spacer Engineering Gift for 3D Solar Cells

The combination of 2D and 3D perovskites to passivate surfaces or interfaces with a high concentration of defects shows great promise for improving the efficiency of perovskite solar cells (PSCs). Constructing high-quality perovskite film systems by precisely modulating 2D perovskites with good morphologies and growth sites on 3D perovskite films remains a formidable challenge due to the complexity of spacer-engineered surface reactions. In this study, phase-pure 2D (HA)2(MA)n-1PbnI3n+1 perovskites with a controlled number of layers (n) are separated on a large scale and exploited as interface rivets to optimize 3D perovskite films, resulting in tunable film structural defects and grain boundaries. The optimized PSCs system benefits from a reduction in non-radiative recombination, resulting in improved optical performance, higher mobility, and lower trap density. The corresponding device achieves a champion power conversion efficiency (PCE) of more than 25%, especially for voltage (VOC) and fill factor (FF). The quality and uniformity of the perovskite films are further confirmed using large-area devices with an active area of 14 cm2, which exhibits a PCE of more than 21.24%. The high-quality thin-film system based on the 2D perovskites presented herein provides a new perspective for improving the efficiency and stability of PSCs.

Harnessing strong aromatic conjugation in low-dimensional perovskite heterojunctions for high-performance photovoltaic devices

Low-dimensional/three-dimensional perovskite heterojunctions have shown great potential for improving the performance of perovskite photovoltaics, but large organic cations in low-dimensional perovskites hinder charge transport and cause carrier mobility anisotropy at the heterojunction interface. Here, we report a low-dimensional/three-dimensional perovskite heterojunction that introduces strong aromatic conjugated low-dimensional perovskites in p-i-n devices to reduce the electron transport resistance crossing the perovskite/electron extraction interface. The strong aromatic conjugated π-conjugated network results in continuous energy orbits among [Pb2I6]2- frameworks, thereby effectively suppressing interfacial non-radiative recombination and boosting carrier extraction. Consequently, the devices achieved an improved efficiency to 25.66% (certified 25.20%), and maintained over 95% of the initial efficiency after 1200 hours and 1000 hours under ISOS-L-1I and ISOS-D-1 protocols, respectively. The chemical design of strong aromatic conjugated molecules in perovskite heterojunctions provides a promising avenue for developing efficient and stable perovskite photovoltaics.

Enhancing Ultraviolet Stability and Performance of Wide Bandgap Perovskite Solar Cells Through Ultraviolet Light-Absorbing Passivator

Ultraviolet light (UV) has caused tremendous damage to perovskite solar cells (PSCs), degrading the perovskite and shortening their lifetime. Defects act as non-radiative recombination sites, accelerate the degradation process, reduce the efficiency of the device and weaken the stability of solar cell. In this work, to realize efficient and stable p-i-n wide bandgap solar cells under UV, a synergetic strategy utilizing UV light-absorbing passivator, (Trifluoroacetyl) benzotriazole (TFABI), enhance UV photostability and regulate the defect passivation is proposed. By using TFABI, the degradation of the perovskite absorption layer under UV light is suppressed, spectral response is enhanced and the Pb vacancy defects are passivated. As a result, the target device achieves an efficiency of 21.54%, exhibiting excellent long-term stability under 365 nm UV irradiation. After 60 h of irradiation, it retains 85% of its initial value (60 mW cm-2 , RH 25-30%, 25 °C).

Large-n quasi-phase-pure two-dimensional halide perovskite: A toolbox from materials to devices

Despite their excellent environmental stability, low defect density, and high carrier mobility, large-n quasi-two-dimensional halide perovskites (quasi-2DHPs) feature a limited application scope because of the formation of self-assembled multiple quantum wells (QWs) due to the similar thermal stabilities of large-n phases. However, large-n quasi-phase-pure 2DHPs (quasi-PP-2DHPs) can solve this problem perfectly. This review discusses the structures, formation mechanisms, and photoelectronic and physical properties of quasi-PP-2DHPs, summarises the corresponding single crystals, thin films, and heterojunction preparation methods, and presents the related advances. Moreover, we focus on applications of large-n quasi-PP-2DHPs in solar cells, photodetectors, lasers, light-emitting diodes, and field-effect transistors, discuss the challenges and prospects of these emerging photoelectronic materials, and review the potential technological developments in this area.

Emerging Two-Dimensional Organic Semiconductor-Incorporated Perovskites─A Fascinating Family of Hybrid Electronic Materials

Halide perovskites have attracted a great amount of attention owing to their unique materials chemistry, excellent electronic properties, and low-cost manufacturing. Two-dimensional (2D) halide perovskites, originating from three-dimensional (3D) perovskite structures, are structurally more diverse and therefore create functional possibilities beyond 3D perovskites. The much less restrictive size constraints on the organic component of these hybrid materials particularly provide an exciting platform for designing unprecedented materials and functionalities at the molecular level. In this Perspective, we discuss the concept and recent development of a sub-class of 2D perovskites, namely, organic semiconductor-incorporated perovskites (OSiPs). OSiPs combine the electronic functionality of organic semiconductors with the soft and dynamic halide perovskite lattice, offering opportunities for tailoring the energy landscape, lattice and carrier dynamics, and electron/ion transport properties for various fundamental studies, as well as device applications. Specifically, we summarize recent advances in the design, synthesis, and structural analysis of OSiPs with various organic conjugated moieties as well as the application of OSiPs in photovoltaics, light-emitting devices, and transistors. Lastly, challenges and further opportunities for OSiPs in molecular design, integration of novel functionality, film quality, and stability issues are addressed.